Layout found in the VIDEO_TS directory is not a DVD-Video file...etc.

Hi all, I am struggling to get a project finished and really need some help after trawling the net without winning.
I can "Build" my project to a folder with Audio_TS and Video_TS files without errors (it's a dual-layer project, by the way), but when I burn the VIDEO_TS files in Toast, the finished DVD won't play as it should in a DVD player. Nothing like in the simulation, which plays fine, buy the way...
When I burn from inside DVDSP, I get the error message:
"The file 'CIRCUSOFMYSTERY.layout found in the VIDEO_TS folder is not a DVD-Video file and will not be included in the final disc or DLT"
and, directly underneath is:
"The file 'VOB_DATA.LAY'.layout found in the VIDEO_TS folder is not a DVD-Video file and will not be included in the final disc or DLT"
...so I gather these errors are causing the playback error...
The problem is displayed thus:
When the disc is inserted, the short video I have set as a first-play does not play, in fact nothing happens. When I hit the DVD player's PLAY button, the main track plays and the menu is not shown at all.
If someone could offer some assistance I would certainly appreciate it.
Cheers.
Spookola.

The messages are not errors.
They are for information only -it is just telling you that those files will not be in the final DVD because the finished disc doesn't need them, nor would they serve any useful purpose if retained.
The Build folder does need them though, which is why it is listed as a "warning". I find that "warning" is a little exaggerated -"attention" would probably be a better choice. If those items are removed, running the build command again will recreate them.
Your issue might be a setting in Toast. Before you burn the img file, test it in Mac OS X's built in DVD Player. Mount the image in the Finder and in DVD Player, go to File > Open DVD Media.

Similar Messages

DVD Studio Pro: The directory is not a DVD-Video directory...?

DVD Studio Pro is saying "Note: The directory ‘/Users/viviennesmith/Desktop/FLIGHT_INSTRUCTOR DVD/PAR’ is not a DVD-Video directory and will not be included in the final disc or DLT."
There are a are few other notes along the same theme!
The entire log reads:
Starting DVD Build THE_FLIGHT_INSTRUCTOR...
Compiler Initializing...
Precompiling Project THE_FLIGHT_INSTRUCTOR
Compiling VMG Information...
Created 6 PGCs in VTSM1
Created 8 PGCs in VMG.
0 Menu(s) will be created...
Compiling Menu PGCs...
Writing VTS_01_0.VOB
Writing VIDEO_TS.VOB
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (The Flight Instructor_SD-MPEG-2 6.2Mbps 2-pass)...
Writing VTS_01_0.VOB
Muxing VTS_01_1.VOB
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
Note: The directory ‘/Users/viviennesmith/Desktop/FLIGHT_INSTRUCTOR DVD/PAR’ is not a DVD-Video directory and will not be included in the final disc or DLT.
Note: The directory ‘/Users/viviennesmith/Desktop/FLIGHT_INSTRUCTOR DVD/The Flight Instructor.dspproj’ is not a DVD-Video directory and will not be included in the final disc or DLT.
Note: The file ‘The Flight Instructor_SD-Dolby Digital Professional 2.0.ac3’ found in the ‘FLIGHT_INSTRUCTOR DVD’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘The Flight Instructor_SD-MPEG-2 6.2Mbps 2-pass.m2v’ found in the ‘FLIGHT_INSTRUCTOR DVD’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘The Flight Instructor_SD.mp4’ found in the ‘FLIGHT_INSTRUCTOR DVD’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘THE_FLIGHT_INSTRUCTOR.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 1
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing ISO 9660 directories
Writing UDF 1.02 structures
Writing files
The recording device reported the media error: Unknown device error. (0x73, 0x03.)
How do I solve this to burn a simple dvd?! The mp4 file I want to burn is sitting in a folder on my desk top. I have made sure it's PAL. Does it need to be in the same folder as the edit project for example?!
Cheers
OnnySmith

All the comments about files that are not of the DVD-Video are normal. Those are files that DVDSP creates and are simply ignored in the burning.
The last line is the key one. It seems either your disc was bad or your recording device is having problems.
Try with a another new disc.
fwiw - certain brands were known to have issues. It's been a while since I've built a DVD but I remember always using Taiyo Yuden and had very few coasters from bad discs.
x

TS2610 'VOB_DATA.LAY' Warning: The file 'VOB_DATA.LAY' found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc. Warning: The file 'YOU_GOT_TO_BE_KIDING_.layout' found in the VIDEO_TS or HVDVD_TS folder will not be included in the f

I have been fighting this file witch came up out of no where for the first time ,if i could understand whats going on maybe i can burn a dvd Help !

Looks like you are making an HD DVD...a format that lost the high def disc wars. Only Macs with Superdrives and discontinued JVC HD DVD decks can play this format.
You need to make an SD DVD...I'll post the steps for that in a bit. If you want a high definition disc, you'll need a BluRay burner, and software like TOAST to burn it.
#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it and select the top option "first play".
5. Now drag your QT from the browser and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

The required directory was not found

"The required directory was not found or has a permission error."
This is the error message I get when I try to authorize my Mac Pro (10.4.10). I have repaired permissions, restarted, reinstalled iTunes, re-linked the iTunes home folder and checked all folder for correct permissions.
Joe

OK, I just got off of the phone with Apple and still no joy. They had me try a few things that did not work, then told me to Archive and Install, which did not either. Anyway, thanks for the additional help very note worthy, but still no joy. Also an email to iTunes Support took me here
http://docs.info.apple.com/article.html?artnum=93061
I have a Users/Shared folder but since the files we are talking about are invisible, I can see how it is structured.
And by the way I tried this one
http://discussions.apple.com/message.jspa?messageID=3577004#3577004
and it did not work. However, when I install a fresh copy of Tiger on the external it did authorize the computer and was able to play the downloads. But coping the invisible file to my boot drive was not successful. But , like I said the music did play when I started up from the external. So I guess that may be my only solution, unless someone can tell what the correct directory is and where it for iTunes downloads.

HT1206 There was an error storing your authorization information on this computer.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be ch

There was an error storing your authorization information on this computer.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

I'd try the following document with that one:
iTunes: Missing folder or incorrect permissions may prevent authorization

HT1420 When I try and authorise I get this message.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. How do I rectify?

When I try and authorise I get this message.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. How do I rectify?

iTunes: Missing folder or incorrect permissions may prevent authorization
Mac OS X
Log in to your computer using an administrator account.
In the Finder, choose Go to Folder from the Go menu.
Type: "/Users" (without quotes) and click Go.
If the Shared folder exists
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod -R 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod -R 1777 /Users/Shared
Press Return.
Quit Terminal.
If the Shared folder does not exist
The following steps will recreate the Shared folder if it is missing and ensure that it has been assigned using the correct permissions.
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Type or copy and paste the following command into the Terminal window:sudo mkdir -p /Users/Shared/
Press Return.
Enter your administrator account password when prompted, then press Return.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod 1777 /Users/Shared
Press Return.
Quit Terminal.

The cartridge directory could not be found.

Error:
"We couldn't get data from the Data Model. Here's the error message we got:
The cartridge directory could not be found. Use the Windows Installer to repair the application. Exception of type 'Microsoft.Office.PowerPivot.BackEnd.StorageException' was thrown."
Using Office 2013 Standard Edition.
Ran the Windows Installer repair on Office.
I get this error when I attempt to execute Globals.addin.ActiveWorkbook.RefreshAll via an application-level add-in.
I Bing'd the error and came up with nothing (thanks, Bing).
Has anyone seen this error and/or can make any suggestions?
Thanks.
Ross

Hi,
>>We couldn't get data from the Data Model
Have you tried to use the hotfix to resolve this issue? You can download it and fix your application.
https://support.microsoft.com/kb/2837666
And Excel will crash if you have recently applied updates for the PowerPivot add-in, but have not also updated Excel.
To resolve this issue, you should apply this update together with the update from KB
2850006
https://support.microsoft.com/kb/2850006
Best Regards
Lan
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Event ID 31138 "during the active directory update not -uc enabled agents were found"

Hi All,
I have Lync standard 2013 server on-premise and Exchange Office 365. I have enabled my users for Voice.
When I add a user to a response group I get the warning that the user is not enterprise voice enabled. This is strange as the user is enterprise enabled and can make and receive calls.
I also have Event ID 31138 on my Front End server.
"during the active directory update not -uc enabled agents were found
The following agents are specified as agents but are not UC enabled:
sip:[email protected]"
Any thoughts?

Hi,
Did you change the default SIP Domain before?
If yes. You may need to remove agent from database. As the agents of a Response Group are added to the rgsconfigdatabase, within the database you will find a table called dbo.Agents. When open it you will see an overview of theagents which are member
of the groups. You can do the following steps to remove an agent from this table:
Right click on the dbo.Agents table and select the option Edit Top 200 rows
Search for the user and remove the specific record.
More details:
http://troubleshootinglync.blogspot.com/2013/05/event-id-31137-unable-to-removeadd.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

HT1727 How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.

How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.

OK, I just got off of the phone with Apple and still no joy. They had me try a few things that did not work, then told me to Archive and Install, which did not either. Anyway, thanks for the additional help very note worthy, but still no joy. Also an email to iTunes Support took me here
http://docs.info.apple.com/article.html?artnum=93061
I have a Users/Shared folder but since the files we are talking about are invisible, I can see how it is structured.
And by the way I tried this one
http://discussions.apple.com/message.jspa?messageID=3577004#3577004
and it did not work. However, when I install a fresh copy of Tiger on the external it did authorize the computer and was able to play the downloads. But coping the invisible file to my boot drive was not successful. But , like I said the music did play when I started up from the external. So I guess that may be my only solution, unless someone can tell what the correct directory is and where it for iTunes downloads.

Critical Error! The jiveHome directory could not be loaded

Trying to install jiveforums.
Installed WLS 1032, downloaded Webcenter additional services 10134
Copied jiveHome to a different directory C:\jiveHome
In the installable directory of Webcenter Additional services executed below command:
java -jar Edit.WAR jiveforums.war
Deployed jiveforums.war in the weblogic server. Restarted the server.
Accessing the URL:
http://<host>:<port>/jiveforums
It redirects to the Jive Forum setup -> Install checklist and shows two errors:
Error1: jiveHome directory
* The file which stores the location to the jiveHome directory ('jive_init.xml') could not be found or can not be written to. Please manually create this file in the WEB-INF/classes directory according to the documentation provided with Jive Forums and restart your application server.
* The location to the 'jiveHome' directory has not been set. Please enter a valid path.
Workaround tried:
Tried to locate jive_init.xml, could not locate this file. Re-executed java -jar Edit.WAR jiveforums.war and entered the directory as C:\jiveHome. Restarted WLS. But no success.
Error2:Valid License
* A valid Jive Forums 5 license does not exist.
Workaround tried:
Generated the license key from jivesoftware.com. Took a backup of jive.license. And created a new license file. Restarted server. Still same error.
Any inputs are appreciated.
Thanks,
Sandeep

Guys,
I have resolved this issue and successfully installed and configured jive forums on my laptop.
I have documented high level steps on my blog http://orafusionmiddleware.blogspot.com (Non revenue generating, only for knowledge sharing)
Cheers,
Sandeep

Import Error: The root directory does not exist

Hi,
I have some isuuses with importing the extended page. When I try to Import it throws an error.
Root Directory does not exist.
I am using the following command.
import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
G":
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
mRN" because it violates scope restrictions.
Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
ause it violates scope restrictions.
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
able style because it is inside "tableLayout".
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
N" of stackLayout style because it is inside "tableLayout".
Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
ecause it violates scope restrictions.
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Import completed.
But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
Could suggest how to solve this problem.
Thanks
Prabhat

Hi Tapash
while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
my concern is why i m getting this error
my import command looks like this
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
could u pls suggest some solution.

The MAC signature found in the HTTP request '***' is not the same as any computed signature. Server used following string to sign: 'POST

Hi,
When trying with Postman sending a REST call to Azure Storage Queues I get:
The MAC signature found in the HTTP request '***' is not the same as any computed signature. Server used following string to sign: 'POST.
The code I have for creating the Authorization Header:
var accountName = "my_account";
string key = ConfigurationManager.AppSettings["my_access_key"];
DateTime dt = DateTime.Now;
string formattedDate = String.Format("{0:r}", dt);
var canonicalizedHeaders = "x-ms-date:" + formattedDate + "\n" + "x-ms-version:2009-09-19" + "\n" ;
var canonicalizedResource = "/my_account/myqueue/messages";
var stringToSign = String.Format("POST,\n\n\n\n\n\n\n\n\n\n\n{0}{1}", canonicalizedHeaders, canonicalizedResource);
stringToSign = HttpUtility.UrlEncode(stringToSign);
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
var signature = Convert.ToBase64String(hmac.ComputeHash(Encoding.UTF8.GetBytes(stringToSign)));
var authorizationHeader = String.Format(CultureInfo.InvariantCulture, "SharedKey {0}:{1}", accountName, signature);
return authorizationHeader;
Anyone any idea what I'm missing/doing wrong?
Additional question: do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?
Thanks.

One issue is with this line of code:
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
Please use the following:
HMACSHA256 hmac = new HMACSHA256(Convert.FromBase64String(key));
and that should take care of the problem.
Regarding your question, "do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?"
With your current approach, the answer is yes. What you can do is create a Shared Access Signature on the queue which will be valid for certain duration and then use that for posting messages to a queue using simple HttpWebRequest/HttpWebResponse.
Hope this helps.

"The Destination Directory Could Not Be Determined For Photo Delluxe 4.0"

I Downloaded Adobes Photoshop from thier Site.
When trying to install pdx401upus.exe,
it will open up the Installation Wizard and then I get the Following "Warning" Message....
"The Destination Directory Could Not Be Determined For Photo Delluxe 4.0"
it just gives me a box to check that says "OK", and then the Wizard Shuts down.
Im running an HP Computer with Windows 7, Tons of HD Space, Ram, Memory ect.
I love using Adobe Photoshop, but since I got this new computer,
my Adobe Photoshop install disc seemed to be too old (Windows 95),
and therefore would not load to my new Computer/Operating System.
Any pointers, Websites, Instructions would be greatly appreciated.
Although I'm not a "Computer Dummy" I know just enough to get me into trouble, so the simpler the instructions....the better.

I am sorry Wwotr but I have not observed a user who has successfully installed and used Photo Deluxe on Windows 7. Since Photo Deluxe we have released 10 versions of Photoshop Elements. I would recommend utilizing the trial of Photoshop Elements 10 and seeing if that will fullfill your needs. You can find more information at http://www.adobe.com/products/photoshop-elements.html.

Hello! Really sorry! Originally this APP software free game, only peace of mind to let children play, but a recent credit card reconciliation only to find the charges and found that the game content is not completely free, content or Payplay games, childr

Hello! Really sorry! Originally this APP software free game, only peace of mind to let children play, but a recent credit card reconciliation only to find the charges and found that the game content is not completely free, content or Payplay games, children do not understand the meaning, pressed by mistake to the game fee of options found APP software fees has been removed, the 3 pen order really is not a small amount, a small fortune in Taiwanthe burden, the normal person would not spend such fees to play mobile games, kids really are unintentional, Sorry! hope you can help me claim to cancel the game cost very grateful!
PS: order number --- 1.MH****Z0J --- 2.MH****4QJ --- 3.MH****6NQ
My English is not good, please forgive me.
<Personal Information Edited By Host>

These are user-to-user forums, you are not talking to Apple here - I've asked the hosts to remove your email address and phone number from your post.
You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
To try and stop it happening again you can turn off in-app purchases on your phone via Settings > General > Restrictions > In-App Purchases 'off'

Layout found in the VIDEO_TS directory is not a DVD-Video file...etc.

Similar Messages

Maybe you are looking for