Layout generation error!!!

Hi ,
I created some Field Groups and have given the Field Structure. But when I try to do the Layout Generation for the field groups I get the error "No field group was selected in the blueprint table"
Can somebody help.
Regards,
Shiny

First of all, check that you have assigned a structure (screen structure) to a newly created field group: start transaction CRMC_BLUEPRINT_C, then follow Application Element -> Field Group -> Field Group. If structure is provided, make sure that it is a DDIC struture.
If it won't help, define an application layout in CRMC_BLUEPRINT_C with that field group for an applicication you want to use it with.
The really thing could help you with generation process is the CRMC_BLUEPRNTC table (check with se16). It should contain an entry for your field group. If it's not - this is the problem.

Similar Messages

Field Group Layout Generation Error

Hi Experts,
I have Created a custom field group using Tr EEWB. now i want to do PCUI customization.
I Have created custom field group and Field Group Structure in tr CRMC_BLUEPRINT_C. now when i am going to create layout for the field group msg coming-
"Program CRM_BSP_LAYOUTC_GENERATE
No field group was selected in the blueprint table"
Please guide me.
Regards!!

Have you included the field group as part of the application layout? Also have you assigned a MAC to the structure referenced by the field group?
Once you have done those steps, then the field group should normally generate.
Take care,
Stephen

Content Generation Error in InDesign

"Content Generation Error" in InDesign-every time I try to preview my document I get the following message:[Error: The assets for one or more overlays could not be located. Verify the assets used are available on disk, then update the article.]. Everything was working fine perfectly just the other day when all I did was preview it in InDesign. I can't think of anything that I could have done to ruin it. All my links appear to be fine, and so far I've gone through and stripped most of the document to find the problem but it won't work unless I take out 99 percent of the document. It seems to have multiple issues and appears to be an entire corrupted document rather than just a few issues with MSOs. The document consists of five pages with vertical and horizontal layouts and I have slideshows, scrollable frames, and multi-state objects but no audio.

That was the first thing I tried because obviously I wanted to find out if it was a problem with my file or a general issue with all uploads to that folio. It seems to be working ok now, although I still have no idea what the problem was and I have never seen that error message before :s
Thanks for your response.
Adam

Layout generation field group could not be read completely

Hello,
if I try to generate some field groups which I have copied on a new sight and changed afterwards I get the error:
Layout not saved as warnings or errors occurred during layout generation:
ACT_DETAIL_TASK ZNEW Field group could not be read completely
This happens only with certain objects not at everyone ?
Thanks in advance
Michael

Hi Thomas,
Everytime you do changes in the reference group the entries in table 'CRMC_FIELDGRP' changes. So you will have to go to this table check entries for the main feild group 'SLO_SALES' in your case and then change entries for this feildgroup in CRMC_BLUEPRINT_C. The idea ia that the data should be consistent/same in both the places.
Hope this helps you.
Regards,
Hetal.

Content generation error. [Error: Invalid operations]

I am getting the following error message while trying to create a dual-orientation folio…
Content generation error.
[Error: Invalid operations]
The strange is that the I am creating the folio from the exact same InDesign files I used to create the folio back in March of this year except that in March I was using InDesign CS5 and whatever the current build of DPS tools was at the time. I am now using InDesign CS6 and v21 DPS tools.
I have successfully created single-orientation folios of the horizontal and vertical InDesign files using CS6 and the v21 tools and I have successfully created a simplified “dummy” dual-orientation folio using CS6 and the v21 tools. It’s just when I try to create a dual-orientation folio using those InDesign files that I get the error message.
Is there any way for me to figure out what the “invalid operation” is?

I tried it both ways. First, I tried bringing in the separate _h and _v files. When that didn't work (i.e. generated the error when trying to add the second orientation to the article) I tried the alternate layout method and added them both at the same time. Same error message was generated.
In general though, I'm wondering what an "invalid operation" signals. I've searched for this term but couldn't find anything. Because I'm able to create single orientation folios from the _h and _v files without any problem, that seems to tell me that my files are built correctly. It's only when it tries to combine them in a dual orientation folio that the error occurs.
Thanks,

Customizing-----Layout Generation!

Hi
When I tried to use transaction "Layout Generation" for a field group.
a error message was shown as "Field group could not be read completely"
anyone know how can I correct the error?
Thanks lot!
Eric

This error could be for several reasons.
Are you trying to regenerate a field group included in other? If yes, you always have to regenerate the "father" fieldgroup.
Ex:
FG1 includes FG2 and FG3
You have to regenerate FG1
Check if this help
Regards

SAP System Message: Syntx error or generation error in a screen

dear sap basis gurus,
i am currently having problems signing on to our DEV server. i get this error message:
<SID>: SAP System Message
Syntx error or generation error in a screen.
it won't let me log on.
there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
have you encountered this problem before? please help me as there we have two imminent go-lives.
thank you very much in advance.
best regards,
albert

hello nick, ashok,
thank you very much for your responses.
i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
i hope i would no longer encounter the error message.
again, thank you.
best regards,
albert

Report Painter GR214 generation error - Short dump 4.6C

While generating a report with more than twenty sections, the system short dumps with the error message GR214 pointing to "MESSAGE_TYPE_X"
"%_T01JR0 " or "########################################"
"INSERT_ROW_FORMULA_NEW"
Any leads to fix this?
The generation error happens only when I include a last line formula in the last section, Till then it is working fine.

Hi,
The error you are receiving could be caused by a large number of row blocks in your report definition, (you can check the report definition with report RGRRDC00). A report should not contain too many row and column blocks. It is not possible to give an upper bound for the number of row blocks (since the length of the coding depends on other parts of the report as well). However, even a complicated Report Writer or Report Painter report should not contain more than 50 row blocks, and reports with more than 100 row blocks should not be defined.
In this case the report(s) have to be redefined. Please also refer to the note 387916 for further information regarding this issue.
When there are more than 30 variables in a report, please have a look at the note 332091.
Please reduce the number of row blocks in the report by using the function 'Edit' -> 'Rows' -> 'Explode' in the Report Painter
definition. This function enables several rows to be created for one row block (in the Report Painter definition one row block is just one row). Report Painter (and Report Writer) are designed to display hierarchical reports where the rows in the few row blocks are built up using the 'Explode' function.
regards
Waman

Smartform report generation error

Hi,
I have a problem with a report calling a smartform. The report works perfectly on the 1 system but on the other system there is a generation error. I found that the problem lies with the following declaration:
data: otf_info type SSFCRESCL.
I compared the structures on the different systems and they are identical. The only difference is the Support Package levels. The error occurs on the system with the higher support package - SAPKB64015 (basis and aba) whereas the other system is still at level 12 (SAPKB64012).
Any ideas what is causing the generation error and what could be done to fix it?
Regards
Liza-Marie

Hi ,
I think there may be some errors in function group errors.
Try the following :
T/Code : SMARTFORMSEnter the name of the form> Test--> This will leads to function module --> Utilities(Menubar)-=-> Repair function group --> Repair.
After repairing the function group --> Save and Activate.
Then transport the Smartform to other system .
Regards,
Lanka

SID generation error

Hi All,
I am loading data for Sales Item for this i have enhanced the DataSource. Now while i am loading the data to DSO it is giving error while activating the DSO--SID generation error as it found some hex. values.
To overcome this i tried with TOUPPER formula for that field but still it is giving error. So i have removed unchecked the check box 'SID generation upon activation' as i am not going to use this DSO for reporting.
But i am transferring data to InfoCube where again it is giving the same error.
Kindly help me out to overcome this error.

Hi
Always Load Master Data before Transaction data to get rid of SID Generation Error.
And Hex Values FM -- CHAR_HEX_CONVERSION.
http://help.sap.com/saphelp_nw70/helpdata/EN/48/b4e431c0ca11d2a97100a0c9449261/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/25/73725c700511d3aa40006094b92fad/frameset.htm
Re: How-to convert a character to its hex value?
Hope it helps

Getting a sid's generation error while activating DSO

Dear All,
We are created a standard dso on top of generic data source. This data source is created on top CDHDR and CDPOS tables through function module.
While acting the DSO , We are getting a sid generation error.
Please let me know the process to resolve the issue or tell me any other alternative solution is available to overcome this situation.
Thanks
Regards,
Sai.K

Dear All,
Thanks for your prompt response and please find the below attachment.Here , the info object fetches some hexa decimal values due to that it got failed.
Please let me know solution to overcome the this error.
Thanks
Regards,
Sai.k

Generation Error - when trying to publish a Java web service

Hi All,
I keep getting the following Generation Error -- java.util.NoSuchElementException_ when I'm trying to create a Java Web Service using the jdeveloper wizard.
I have 2 entities and 2 stateless session beans acting as their facades. One entity has a One-One(FK) relationship with the other entity. I test out the entities and session beans using the test client and the OC4J embedded container and everything seems to work. When I try to generate a Java WebService from one of the entities I keep getting the "Generation Error". Could someone please provide me with some insight into why I'm facing this problem, because it seemed fine when I published J2EE web services previously and now this happens and I cant seem to publish web services anymore. Everytime I keep getting the same GenerationError. Thanks in advance.

Without going into any technical discussion about the code, my first question is what JDK version was used to create this which was imported into the form? Understand that Forms 10 runs on JDK 1.4.2, so if you used any newer JDK version, likely there will be problems.

Generation error during WebDynpro migration from 7.0 to 7.31

Hello everybody!
We are trying to migrate some WebDynpro DCs to NW 7.31. After checking in the old sca file into the new track, synching the DCs in NWDS and creating projects for them, most of the DCs compile ok, but we get a build error in one WebDynpro DC we are not able to resolve.
The build.log shows
    [wdgen] [Error]   Generation error while processing <somepath>/NWDSWorkplace_7_3.jdi/2/t/C5FB4D1181864A07E2DF8F1E8D280266/gen_wdp/packages/de/xxx/somepath/wdp/Resource<myview>.properties (java.lang.reflect.InvocationTargetException)
with the stack trace showing an Generation error while processing template defaultResource:
     [wdgen] [Info]    Generation error while processing template defaultResource
     [wdgen] [Info]    Catching throwable null
     [wdgen] [Info]    java.lang.reflect.InvocationTargetException
     [wdgen] at sun.reflect.GeneratedMethodAccessor114.invoke(Unknown Source)
     [wdgen] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen] at java.lang.reflect.Method.invoke(Method.java:597)
     [wdgen] at com.sap.ide.generationfwk.task.GenerationTaskJavaMethod.executePersistent(GenerationTaskJavaMethod.java:139)
     [wdgen] at com.sap.ide.generationfwk.GenerationBase.doPersistentGeneration(GenerationBase.java:207)
     [wdgen] at com.sap.ide.generationfwk.GenerationBase.doPersistentGeneration(GenerationBase.java:164)
     [wdgen] at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentDefaultResource(Generation.java:541)
     [wdgen] at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentResources(Generation.java:3188)
     [wdgen] at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentRecursively(Generation.java:1788)
     [wdgen] at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentRecursively(Generation.java:1772)
     [wdgen] at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentRecursively(Generation.java:1772)
     [wdgen] at com.sap.ide.webdynpro.generation.Generation.generateComponentsForArchive(Generation.java:2660)
     [wdgen] at com.sap.ide.webdynpro.generation.Generation.generateMDOsForArchive(Generation.java:2604)
     [wdgen] at com.sap.ide.webdynpro.generation.Generation.generatePersistentArchive(Generation.java:1630)
     [wdgen] at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:190)
     [wdgen] at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:69)
So far, everything I could find is pointing to some localisation issue, but I'm not able to solve the problem. Some hints say I'd have to change the language settings of the DC (or SC) upon import, but I never saw anything that gave me an opportunity to do so. On the other hand, other WebDynpro DCs in the same track get imported o. k. and compile without any error.
The other thing I see in this WebDynpro DC is that in some views, all GUI element texts are missing, some views are o. k.
Can anyone shed some light on this issue ?
Thanks
Michael

Ok, I can provide some more information:
In the WebDynpro DC's .dcdef file, I changed
<properties>
<localization xmlns="http://xml.sap.com/2003/06/Localization" xmlns:ns0="http://xml.sap.com/2003/06/Localization">
   <domain>BC</domain>
   <originalLocale>en</originalLocale>
</localization>
<minimizeClassFiles xmlns="http://xml.sap.com/2004/07/DCProperties/WebDynpro" xmlns:pns1="http://xml.sap.com/2004/07/DCProperties/WebDynpro">auto</minimizeClassFiles>
<projectVersion xmlns="http://xml.sap.com/2004/07/DCProperties/WebDynpro">1</projectVersion>
</properties>
to
<properties>
<localization xmlns="http://xml.sap.com/2003/06/Localization" xmlns:ns0="http://xml.sap.com/2003/06/Localization">
   <domain>BC</domain>
   <originalLocale>de</originalLocale>
</localization>
<minimizeClassFiles xmlns="http://xml.sap.com/2004/07/DCProperties/WebDynpro" xmlns:pns1="http://xml.sap.com/2004/07/DCProperties/WebDynpro">auto</minimizeClassFiles>
<projectVersion xmlns="http://xml.sap.com/2004/07/DCProperties/WebDynpro">1</projectVersion>
</properties>
After that, the views with previously missing GUI texts were showing these texts inside the NWDS WebDynpro view editor, and those views that did previously show these text didn't show them any more! So there seems to be some discrepancy regarding the language the views were created in.
Any hint on what files have to be changed in what way to either remove internationalization completely or to set all views to a single language ?
Thanks
Michael

Runtime Error in CA01 - Syntx error or generation error in a screen 1200.

Hi,
I am unable to identify the exact reson for this runtime error, please guid what i need to do to overcome this error.
Transaction CA01.
I am getting below Syntax Error in Screen 1200 of Prog SAPLCPDA
Element CHANGE_RULE touches or overlaps other element
Message no. 37315
Please find below Error Log.
Short text
    Syntx error or generation error in a screen.
What happened?
    At the screen generation it was detected that a screen to be generated
    has a syntax error or could not be generated due to another error.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    Screen "SAPLCPDA" 1200 could not be generated.
How to correct the error
    Rerport the error to SAP if it is a SAP screen.

Hi,
What are the possible reasons for getting this error.
Runtime Error in CA01 - Syntx error or generation error in a screen 1200.
Thanks in advance

Generic oracle eway code generation error in Java caps 5.1.3

Hi,
I'm using an oracle eway for adding records to a table. I have a prepared statement in the otd. When I try to build the project I'm getting the following error. Could any one let me know how this problem can be fixed?
com.stc.codegen.framework.model.CodeGenException: Generic Oracle eway code generation error(ERROR_CODEGEN_GENERIC_CODELET_GENERAL)
     at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1860)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.processCodelets(CodeGenFrameworkImpl.java:640)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1544)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
     at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
     at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
     at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
     at org.openide.util.Task.run(Task.java:136)
     at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
Caused by: com.stc.codegen.framework.model.CodeGenException: Exception when generating OTD code ...Exception: javaClass: Oracle_std_otdOTD: Exception when invoke DB Codegen Task...Exception: Invalid parameter type: Class : [Std_insert_PreapredStat] Object: [Param1] Param Type : [DECIMAL].(ERROR_CODEGEN_DB)(ERROR_CREATE_OTD)
     at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateOtdJarFile(OracleEWayCodeletFactory.java:2045)
     at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1756)
     ... 10 more
Regards,
Abdul

hi...
i too getting same problem..how did u reslove this...
please help me out...
thanks in advance
KK

Layout generation error!!!

Similar Messages

Maybe you are looking for