Layout in selection screen of Bex report

Hi Gurus,
I have a report which is needed by many users.
Now each user has a different way to use the report
like SE wise,material wise,payer wise , each with selected key figures.
Now i have one solution that to create a seperate view for each user, but i dont want to maintain number of views.
Again i have to schedule the same report for email to diferent users through Enterprise Portal where Views  are not supported
so can i have any other way to meet this requirement
Can we have layout selection in bex report selection screen ( as we have in R/3 reports) ?
( i m using BI 7.0 and EP 6.0)

Hi Sonal,
If you are using EP end, then that can be achieved at there but for the same as u already said that you have to create either views of the query or you have to create seprate query's itself and at the EP end you can define which query you want at Different selection. But at BI end there is as such no option to do so, i mean at query level .
Thanks
dipika

Similar Messages

  • Display F4 values as TEXT ONLY on selection screen of Bex report

    Hi,
    I have InfoObject with text(short) loaded for it. In Bex report on selection screen, I need to display ONLY TEXT values when you do F4 for values. How this can be achieved? I get key & text both now.
    Please note that I have tried all below settings -
    1. Set Text in InfoObject maintenance screen.
    This setting is over-ridden if you have multiprovider specific settings defined.
    2. Set Text in Infoprovider Specific properties.
    Here if you do KEY only, it works.. if you do KEY & TEXT, it works... but if you do TEXT only, it DOESNT work. It works for filter F4 values after report is executed but doesnt work for F4 values on Selection screen. There is no way I am able to get TEXT only on F4 values on selection screen.
    3. Set Text in Query
    These setting defines how value is displayed on report output. Nothing to do with F4 or Filter values.
    Thanks
    Abhijit

    Forgot to mention - I am on BI 7.0 & Frontend 3.5
    Thanks
    Abhijit

  • Set Default Layout in Selection Screen of  FBL3N

    Dear All,
    Here in FBL3N presently i we have a default layout is /balaji.
    But now i want to change this as a standard layout 1sap.
    I can try this in path SETTING->ADMINISTRATOR->SET DEFAULT LAYOUT.
    But after done this and save this procedure when i run this Transaction again
    no change effected.
    Means my change is not effect in selection screen of FBL3N.
    So can anybody tell me how can i change my default layout in selection screen of FBL3N .
    Please kindly help me ....
    Thanks
    Keyur

    Hi,
    Try with below navigation
    Run the report and go to the menu settings->Layout->Choose
    and also go through this link
    http://wiki.sdn.sap.com/wiki/display/ERPFI/Howtochange-setdefaultlayoutintransactionFBL1N%2CFBL3NandFBL5N
    regards
    kk

  • How to display the sort value in the selection screen in the report title

    Dear All,
    How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
    Good day,
    Thanks and regards
    Arun S

    Hi Arun,
    Try this.
    1, Set one dynamic parameter,
    2, Drag and drop that parameter into  your report title.
    3, Pass the value(sort value) dynamically from your application,
    4, Cheers..
    Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then  set the data source from CR designer. and darg and drop that data column into the report.
    Hope this will work,
    Regards,
    Salah
    Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

  • Difficulty in adding new parameter in selection screen of GR55 report

    Hi Gurus,
    I have a requirement to add an extra field in Cost center:Act/Plan/Comm CC Cur report.This is otherwise a Z report in report painter with 0% code (T-code : GR55-> Report group->Report).But,when we go to technical information of this report,it has four standard sap programs,which contains code for this selection screen.It does not even have a modification scope.
    Selection screen of this report contains following parameters:
    Selection values:
    Controlling Ar
    Fiscal Year
    From Period
    To Period
    Plan Version
    Selection Groups:
    Cost Center Group
    Or value(s)
    Cost Element Group
    Or value(s)
    My requirement is to add one more parameter : Purchase oeder in new block:
    Is there any way to achieve it.
    Note: Copying the standard progs into custom prog is not working,i already tried that.
    Please let me know your suggestions,if any one of you came across such requirement before.it is very impoertant for me.
    Thanks in advance,
    Meenakshi

    Hi  meenakshi239,
    you can always use implicit enhancement spots.
    Regards,
    Clemens

  • Functional area(FKBER field in the selection screen of the report painter))

    Hi,
    I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
    Regards,
    Palani

    1. Call GR22 and click "Characteristics".
    2. Check FKBER and assign a position number to it.
    3. Save and close the library.
    4. Call your report in GRR2 and you should now see FKBER as an available characteristic.
    5. Use it in the General Data Selection or as a Lead Column, as per requirement.
    Or,
    1. Call GR21 and create a custom library. Provide a name and description and also provide a library you can copy from (scan for the best-fit library).
    2. Now follow the steps 2 through 5 above to achieve your result.
    Hope this helps.
    Cheers.

  • Passing values to a dynamic selection screen via a report

    Hi,
    I have the following problem and need to seek your expertise urgently.
    In my program, I need to call another report by passing in parameters to the selection screen of other report. However, I could not pass values into a dynamic selection screen. I tried to use submit (report) with free selection but do not know how it works.
    Currently, I tried calling the function RS_REFRESH_FROM_DYNAMICAL_SEL and FREE_SELECTIONS_RANGE_2_EX. Using the object the first function has returned to me, I tried to append values such as fieldname etc to it. However, I realised the field names of a dynamic selection screen keeps changing. So I would not know how to pass a particular value to a selection field.
    Appreciate any help given.
    Thanks,
    CK

    Hello CK,
    Are you using logical database in your selection screen program attributes? If it is, look at include file DBxxxSEL for parameter named xxxDYNSE where xxx = logical database. Debug the program that has that dynamic selection, and look at field xxxDYNSE. This should give you a hint on how to populate the parameter when you submit the program.

  • Input Variable on Selection screen in BEx

    Hi Team,
    Is there a way to change the sequence of Input variables on Selection screen in BEx ?
    Thanks in Advance.

    Hi,
    Go to query designer - query poperties - you find variable sequence tab
    you change the sequence of your variables
    Thanks,
    pk.

  • Selection Screen for crystal report ?

    Hi to all,
    Is it possible to create selection screen using Crystal report designer alone ?
    I came to know that we can give selection parameteres using SELECT EXPERT option in desginer.
    Can we create selection screen for user input like we have in abab (selection screen) ?.
    Is it possible to check authorization using Crystal report designer ?
    If anyone knows anything .... remotely connected with the question I asked please reply.
    Waiting for reply.
    Regards,
    Surya.

    Surya,
    To do what you are wanting, you will want to do the following:
    1) Create parameters. Open the Field Explorer > right click Parameter Fields > fill in the necessary fields o create the desired parameter.
    2) Add the parameter to the Select Expert.
    2a) If you are using a SQL Command to generate your data set you will need to add the parameter name to the Parameter List of the Command and add it the selection criteria of the SQL statement.
    Something like this:
    WHERE f.FieldName = {?ParameterName}
    HTH,
    Jason

  • Getting two selection screen in one report

    Hello Friends,
    I am Making report, In my report on first screen i have given two pushbutton, like this :
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
    PARAMETERS : p1_but RADIOBUTTON GROUP g1,
                             p2_but RADIOBUTTON GROUP g1.
    SELECTION-SCREEN END OF BLOCK b2.
    now i want when user click on any one pushbutton it shows another selection screen, whose select options are:
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
    SELECT-OPTIONS: so_erdat FOR lf_date,
                    so_vbeln FOR lf_vbeln MATCHCODE OBJECT zvbeln..
    SELECTION-SCREEN END OF  BLOCK b1.
    Please guide me can i use two selection screen in one report?, If yes then how can I use? Please revert back me as soon as possible.........

    Hi,
    you can achieve it only by using two USER_DEFINE_SELECTION SCREEN.
    For detail check the link
    http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dba83d35c111d1829f0000e829fbfe/content.htm
    Regards,
    anirban

  • How to force selection screen in WAD Report

    Hi Gurus,
    How do we force a variable selection screen in WAD Report. We are in SP 10.
    Thanks
    Syed

    Hi Karthik,
    Iam not sure for some reason, when I select web_template and click on Web Parameters, there nothing available below Behaviour section. However when I create a new Analysis Item and see its properties, the Behaviour section shows only Allow Navigation & Only Hierarchy options.
    Should I reinstall my front end. We are in SP10.
    Appreciate your response.

  • 2 selection screen in one report.

    hi,
    i need to have 2 selection screen in one report....based on the input of 1st selection screen i need to display another selection screen. The 1st selection screen consist of three radio buttons....selecting one of them should allow me to further input data....
    i tried user command, modif id...but the problem is the 2nd selection screen is also displayed initially and den after clickin d radio button i get only the 2nd selection screen...
    i cannot use module pool programming coz of user requirement.
    could anybody help with the code??

    Hi
    Please this code ..
    SELECTION-SCREEN: BEGIN OF BLOCK c1 WITH FRAME TITLE text-001.
    Upload table
    PARAMETER: p_upload TYPE char01  RADIOBUTTON GROUP rsel
                        DEFAULT 'X'  USER-COMMAND ucomm,
    Edit Tables
               p_edt_tb TYPE  char01 RADIOBUTTON GROUP rsel.
    SELECTION-SCREEN: END OF BLOCK c1.
    Upload table
    SELECTION-SCREEN: BEGIN OF BLOCK c2 WITH FRAME TITLE text-002.
    PARAMETERS: p_tab   TYPE char16     MODIF ID m1,
                p_comp  TYPE char18     MODIF ID m1,
                p_plant TYPE werks_d    MODIF ID m1,
                p_excel TYPE localfile  MODIF ID m1.
    SELECTION-SCREEN: END OF BLOCK c2.
    Edit Table
    SELECTION-SCREEN: BEGIN OF BLOCK c3 WITH FRAME TITLE text-003.
    Replace component
    PARAMETER: p_rp_cmp TYPE char01  RADIOBUTTON GROUP edtb
                          DEFAULT 'X' USER-COMMAND ucomm MODIF ID m2,
    Edit Lines
               p_edt_ln TYPE  char01 RADIOBUTTON GROUP edtb MODIF ID m2.
    SELECTION-SCREEN: END OF BLOCK c3.
    SELECTION-SCREEN: BEGIN OF BLOCK c4 WITH FRAME TITLE text-004.
    Replace component
    PARAMETERS: p_tab_r   TYPE char16 MODIF ID m3,   "Assembly Table Name
                p_comp_r  TYPE char18 MODIF ID m3.   "Upload Table Name
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(31)  FOR FIELD p_fcomp  MODIF ID m3.
    PARAMETER: p_fcomp  TYPE zpart  MODIF ID m3.
    SELECTION-SCREEN COMMENT 62(20) FOR FIELD p_tcomp  MODIF ID m3.
    PARAMETER  p_tcomp  TYPE zpart  MODIF ID m3.
    SELECTION-SCREEN END OF LINE.
    Edit Lines
    PARAMETERS: p_fexcel TYPE localfile  MODIF ID m4,
                p_texcel TYPE localfile  MODIF ID m4.
    SELECTION-SCREEN: END OF BLOCK c4.
    SELECTION-SCREEN: BEGIN OF BLOCK c5 WITH FRAME TITLE text-005.
    validate data
    PARAMETERS: p_valid AS CHECKBOX DEFAULT space
                        USER-COMMAND ucomm MODIF ID m5,
    Background Processing
                p_back  AS CHECKBOX DEFAULT space
                        USER-COMMAND ucomm.
    SELECTION-SCREEN: END OF BLOCK c5.
    AT SELECTION-SCREEN OUTPUT.
    Design selection parameters dynamically
      PERFORM sub_set_file_param.
    FORM sub_set_file_param .
      LOOP AT SCREEN.
    If Upload is check
        IF  NOT  p_upload IS INITIAL.
          IF screen-group1 = 'M2' OR
             screen-group1 = 'M3' OR
             screen-group1 = 'M4'.
            screen-active = 0.
          ENDIF.
        ELSE.
    If Edit Tables is check
          IF screen-group1 = 'M1'.
            screen-active = 0.
          ENDIF.
        ENDIF.
    If Replace Component is check
        IF p_rp_cmp IS NOT INITIAL.
          IF screen-group1 = 'M4' OR
             screen-group1 = 'M5'.
            screen-active = 0.
          ENDIF.
        ELSE.
    If Edit Lines is check
          IF screen-group1 = 'M3'.
            screen-active = 0.
          ENDIF.
        ENDIF.
    Modify the screen
        MODIFY SCREEN.
      ENDLOOP.
    ENDFORM.

  • Selection screen variant for report

    Hi,
    Can we restrict the selection screen variants for reports by user? For example my report is ZREPORT. Different users can save variants for the report. When they choose a variant for executing the report, they would like to see only the variants they created.
    By default SAP lists all variants created (irrespective of who created).
    Thanks
    Anil

    Hi,
      If you want the other users doesn't want to execute (Not see) other variant..you can check if that user has created the variant in the AT SELECTION-SCREEN event..
      By checking VARI-VARIANT against the table VARID and check if sy-uname <> VARID-ENAME.
    Thanks,
    naren

  • Add Exchange rate type to Selection Screen in BEx

    BW Experts,
    Business raised a request to add Exchange Rate Type(KURST) from TCURR table in the selection screen of BEx so that they can select the required rate and target currency for a particular key figure.
    In Query Designer we can provide variable for currency by going into the context menu of key figure but not sure how to provide a variable on Currency Conversion Key.
    Please suggest.
    Thanks in advance.
    -Bobby.

    Hi there,
    You could with user exit define a variable ready for imput but in step 1 prefill the variable with only those values, but this would still when the user executes when pressing F4 be able to check all that. Nevertheless that variable would be prefilled with the values you wish in user exit.
    Another option is to mark 0RTYPE in RSD1 as authorization relevant and manage different authorization values for the users. This way you could when the user presses F4 see only values he/she is authorized.
    Diogo.

  • Error when generating the selection screen '0005'of report 'XYZ'

    Hi All,
       We copied std SAP pgm and were trying to rename the one of the screen but couldnt. When I tried to transport it to test system it went in to dump giving the error  Error when generating the selection screen '0005'of report 'XYZ' .
    Please advise me on how to remove this dump.
    Regards
    Saurabh

    If you look at the selection screen, you'll probably find that there are overlapping elements (text elements over select-options) or something like that.
    Rob

Maybe you are looking for