Layout of general Ledger

Hello, is possible in the  pre-printed  of general ledger,  besides the project code the name of the project.
Thank you
Edited by: Carlos Zea Perez on Nov 26, 2009 6:53 PM

Hi,
If you are talking about PLD, then the answer is NO.  You need your own report using some other tools like CR to build the report.
Thanks,
Gordon

Similar Messages

  • Standard Crystal Layout for General Ledger Report, Development Limitations

    Hi Guys,
    I have experienced some development limitations in the standard crystal general ledger layout for "General Ledger report" in SAP.
    So if we are running standard "General Ledger" report we have a lot of columns but we unable to get these columns in the standard crystal layout because PLD_Items (XML source file) doesn't contain all of them. For example, I need to add a "Project" into existing standard crystal layout and I can't do that.
    Do you have guys, any ideas how to change PLD_Items source or it's impossible?
    Any help will be appreciated.
    Thanks,
    Sergey Magsumov

    Hi,
    Please refer this thread http://scn.sap.com/thread/642764
    Thanks & Regards,
    Nagarajan

  • General Ledger Print out

    Hi, is there any way to add other field in the Journal to the General Ledger? I found that all fields in the G/L setting are 'System Variable'. But if I change it to database and select a field, it allows me to do so but actually in the print out, the contents don't show up in the G/L.
    Is there any other way that I can add field to the G/L other than 'System Variable'?
    Thanks.
    Raymond

    Hi,
    where would you add the UDF ? If it is in the journal entry (OJDT or JDT1 tables), the tables are not available in the print layout designer --> general ledger PLD form --> source type database. The nearest is OACT table. If the UDF is n the available tables in the GL report form, you could display the UDF in the GL report.
    It would be better to use crystal report or reporting services, also you could use XL reporter, if you need to have special GL report that can display a certain UDF you made in the journal entry or other tables.
    Rgds,

  • How to identify the open items of vendor/customers/general ledger

    i would like to know the t.code for identifing the user wise open items for vendor/customer/general ledger.

    Dear,
    You can use frequently used reports like FBL1N for vendors, FBL3N for GL and FBL5N for customer. You can exeucte open item report and drag Username field from the layout and sort the report in ascending or descending order.
    Regards,
    Chintan Joshi

  • Vendor number in General ledger

    Hello team,
    we are in ECC 6.0
    we need vendor number in general ledger report fagll03
    in the layout of FAGLL03 it is available. but it is not updating the field with vendor number.
    how can i get.
    regards
    Sri

    Dear,
    It will not be displayed in the general ledger, you go the reconciliation account of the vendor and execute for the period required. Now you can see the vendor in the field of assignment, if the field is not available then add the field from change layout button in fbl3n.
    In FAGLL03 and double click it will take you to line item display, where you can see the vendor code in assignment field.

  • How to list Financial documents in General Ledger View

    Dear Sir,
    The Financial Document posted during MIRO does not show profit-center against the line item pertaining to Vendor Credit GL  ( in Tcode FB03) . However when we click on "General Ledger View" then Profit-Center gets reflected against all Line Items of the document .
    We want to display multiple Financial documents with Profit Center , pl guide us as how can we do it .
    We assure to give full points for the suggested solution pl .
    With Rhanks and Rgds
    B Mittal

    Hi,
    1 - Enter transaction FBL1N
    2 - Ctrl + F8 to change layout
    3 - Check "find" and search "Profit Center"
    4 - Press left-right arrow and confirm.
    Regards

  • General Ledger GL Account Text in FBL3N

    Dear Friends,
                       Is it possible to get the General Ledger Account Text in FBL3N. If yes, please suggest the noters,if any or the customization steps.
    Thanks in Advance,
    Prathamesh.

    Hi
    this is Chandu,
    U can chose the fields by opening change layout (ctrl f8) button after opening the into fbl3n.from there which fields u want to display on screen,u can set those fields.And if u want to have that layout futher u can save(ctrl f12) that layout and later on u can chose(ctrl f9) that. I think this is ur doubt
    Thank u

  • General Ledger - System Integrity and Control Check

    Our SAP Business One system receives input from various sources on a daily basis. Therefore we would like to establish a business process to ensure balancing of the books and monitoring of suspense accounts.
    How do we develop reports to check the following 3 items;
    1. Business Units (On and Off Balance sheet accounts not balancing to zero and Monitoring specified category of accounts)
    2. Ledgers Vs Journal integrity (Ensuring Journals, Detail Ledger and Daily Ledger are all consistent at all points of time)
    3. Financial integrity (Comparing the balances held between the detailed Ledger, Monthly Average Ledger and Yearly Average Ledger - ensuring they are synchronised at all times)

    Hi,
    Please refer SAP note for GL variables. Note that it may be difference from version to version.
    867048
    - List of variables for designing the General Ledger layout
    A complete list of variable can be downloaded from SAP business one customer portal. To access below link, you need S-user ID and password
    https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000680316&_SCENARIO=01100035870000000183&_ADDINC=011000358700002837782005E&
    Thanks & Regards,
    Nagarajan

  • How do I print General Ledger Balances for a particular day

    HI Sap Gurus,
    I want to print general ledger balances as of a particular day/date.  I did use FBL3n, but it gives me with line items,
    I want just the totals.  Do you know of any other report I can use.
    Would really appreciate the help
    Thanks so much will surely avoid points
    Pearina

    Hi Ms. Pearina
    The only way you can get the totals for one date is using FBL3n or the S_ALR reports & the only way you can print only the total instead of every line item is by running FBL3n & clicking on the ' * * ' at the bottom line that shows the total of the GL account.  Then you will be able to eliminate all the line items from your print out.  You can save this as a layout & call that layout everytime you only want to see the totals.  You can also default the layout if you want.
    Any further questions, please post your follow up...
    If useful, award points please...
    Thanks
    Morgan

  • What is the system variables of document number in General Ledger PLD?

    Dear all,
    Would anybody kindly tell me what is the system variables of document number in General Ledger Print Layout Designer?
    The default print layout use transaction number (system variables 272), however, my client wants document number to be displayed in the transaction number column.
    Regards,
    Simon Chiu

    Hi
    The only list available for Supported variables is for the version 2007A and for some specific localizations like Brazil and India.
    For the 2007A version the list is available in the following link:
    http://service.sap.com/smb/sbo/pld
    'How To Use the PLD Variables File in Release 2007 A '
    But in general the variables are for documents not for reports.
    In this case I believe there's no variable and you may need to fill a requirement in the Forum for that.
    Paulo Calado
    SAP Business One Forums Team

  • Define field group in general ledger accounting

    what is the use of 'define field groups', which comes under general ledger accounting- master date- additional activities, & how can we assign it?

    Dear Siddhi,
    In IMG under
    Financial Accounting -> General Ledger Accounting -> G/L Accounts -> Master Data -> Preparations or
    Financial Accounting (New) -> General Ledger Accounting (New) -> Master Data -> G/L Accounts -> Preparations
    Field groups:
    Screen Fields are grouped into field groups. Field Status would idnentify the staus of particular field where as field status group would identify the status of group of fields.
    Example:
    Account control 
    Account managemen
    Document entry  
    Bank/financial de
    Interest calculat
    Joint venture   
    These groups would intern have fields.
    When creating a G/L account, you must specify an account group.                                                                               
    The account group determines:                                         
    o   the interval in which the account number must be
    o   which fields are required and optional entries when creating and changing master records
    o   which fields are suppressed when creating and changing master data.
    It enables you to control the layout of screens.
    You use account groups to combine accounts according to the above criteria (for example, a P&L account group, asset account group and material account group).                                              
    Hope this will help.
    Regards,
    Naveen.

  • Profit center and segment columns in the General ledger view of FB03L

    Hi Experts,
    one customer is asking how to get the Profit center and segment columns in the General ledger view of FB03L.
    Could you please assist?
    Thanks, Mateus

    Enter company code, doc. no., etc. in the selection screen of FB03L and hit Enter.  In the next screen that displays the document, choose change layout option (it is third icon from the right in the icons that are right above the document line items) and move profit center and segment fields from Column Set (the fields on the right) to the Displayed Columns (left) and hit Enter.  You will see the fields with values, if any.  Using the same icon again, choose save layout and save that layout.

  • How to update check number in general ledger and vendor ledger automatical

    Dear All,
    i need some clarification in check updation in general ledger and Vendor ledger through the  system automatically.
    While making vendor payment system will not update check details in vendor ledger and bank GL code.while doing  bank reconcilation its very difficult to identify check no and amount for that we have updating manually but its time taking. Is there any program or any enahancement for updating check number in general ledger and vendor ledger.
    Kindly suggest me how to update check number . Is there any programm or enahancement for check updation.kindly suggest me.
    Thanks in advance
    Thanks and Regards
    Girish

    HI,
    If I am understanding correctly what you are wanting is to be able to see the check number for the payment document in both FBL1N and FAGLL03.
    Special fields for AP line item reporting can be configured via IMG. Define additional fields for line item display> 
    Not all fields are available, but this one is.  Add this entry, you can also add check encashment date if desired.
    PAYR  table name.
    CHECF Field name
    After these fields are saved, they can be selected in the line item layout on FBL1N.
    You may also need to reset the ALV buffer using program BALVBUFDEL
    Resetting the buffer is only necessary once in each client.
    Hope this helps.
    Alicia

  • Business One C# DI API's for General Ledger Report?

    I am working on the General Ledger Report and unable to find the DI API's for C# for the following cases. If somebody can point me the API's, that would be really helpful. I have handle to the logged in company.
    Get all ChartOfAccounts
    Get AccountSegmentations
    Get BusinessPartners
    Get JournalEntries_lines
    I am new to SAP. The documentation is bit unclear. I am using the following code to load the objects. Now it is unclear how to loop through the journalvouchers to load all the lines one by one.
    SAPbobsCOM.AccountSegmentations segmentations =  oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oAccountSegmentations);
                SAPbobsCOM.AccountSegmentationCategories categories = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oAccountSegmentationCategories);
                SAPbobsCOM.BusinessPartners partners = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oBusinessPartners);
                SAPbobsCOM.JournalVouchers vouchers = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oJournalVouchers);
                SAPbobsCOM.JournalEntries jEntries = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oJournalEntries);
                SAPbobsCOM.JournalEntries_Lines jLines;

    Hi,
    Are you trying to run the report via code?  If so, you can only do that using the UI objects as there is not DIAPI for reporting.
    You first need to activate the menu item for the report:
    connect.SboApp.ActivateMenuItem("13058");
    Once you've done that, you can get the active form which will be your criteria window, use the UIAPI to set your criteria and run the report by getting the OK button object and calling the Click method.
    David

  • General Ledger Accounting (New): Line Items of the Leading Ledger

    Hello Guys,
    We are planning to implement
    General Ledger Accounting (New): Line Items of the Leading Ledger
    0FI_GL_14
    We are in ECC6 sap_appl 6.00 and BI 7.0 SP 14, BI Content 7.3 level 4.0
    The new GL line item is available
    Financial Accounting: General Ledger Accounting (FI-GL)
    Available as of Release - SAP Enhancement Package 3 for SAP ERP 6.0
    Shipment - SAP NetWeaver 7.0 BI Content Add-On 3 Support Package 08
    Content Versions- 1.0; 703
    Just we have  to install SAP NetWeaver 7.0 BI Content Add-On 3 Support Package 08  and on ECC side SAP Enhancement package 3 for ERP 6.0 --. Financial accounting - SAP APPL 603.
    Is it correct. Can you please confirm.
    Thanks
    Senthil

    Hello Senthil,
    Yes, thats engough, since SAP is recommending the same for that datasource 0FI_GL_14. I think you are already in that version.
    See this SAP help document
    [DataSource Transactional Data: 0FI_GL_14|http://help.sap.com/saphelp_nw04s/helpdata/en/45/4f8e8bbf3f4f63a5dd197ef7d53fa2/content.htm]
    Thanks
    Chandran

Maybe you are looking for