Layout of menu on Portal
Hi,
I want use portal menu as a portlet, but I don't know how to change layout of generated menu. I know how I can change colors and fonts but I don't know how to change layout. Currently is menu in porlet generated into html table by PL/SQL procedure, but I need DIVs with specific parameters.
Many thanks.
Hi!
I have the same problem!
Did you find a decision?
Similar Messages
-
Do a new layout on SAP NetWeaver Portal need more Performance?
Hello,
we want to create a new layout on SAP NetWeaver Portal in the Corporate Design of our company. Somebody said me, that a change from the standard layout needs a lot of more Performance on the server. Is that true?
At the present time our server already works very slowly with the standard layout. Is it useful to change the layout? Or do we need a better server for that?
Thanks in advance!
Best regards,
Ulrike ArndtHi,
It depend on how you design your layout.
Use standard light framework and design your layout without heavy weight components.
It increases the performance also.(a little b
it.)
Thanks and Regards,
gopal.sattiraju -
3rd level hover menu in portal
Hi,
I have implemented the hover menu as explained in this blog by Ameya
"Implementing the Hover Menu on Portal Top Level Navigation, Part 2"
Does anyone know how to implement the third level Hover menu in portal?
e.g.
CRM
- SALES
-SUPPORT
Is it possible to have the 'detailed navigation' links as an option on the hover menu??
Can anyone please provde me the details?
Thanks,
DVKplz refer to following links:
http://help.sap.com/saphelp_nw04s/helpdata/en/5a/33befa45ca7f459b24d0c5d51d0749/frameset.htm
Number of levels in Top level Navigation
hope thid helps you to some extent.
Regards,
Yogesh... -
Netui:form not refreshing from global menu in portal 10.3
Hi,
I'm working on weblogic portal 10.3 . When clicked on menus jsp page is opening fine. After an action is performed, when clicked on menu again to navigate to the same page form values are getting retained.
Tried to debug, First time the page is requested it does go into begin() of corresponding controller but subsequent requests does not got to begin action and thus retaining the old page again and again.
Any help much appreciated.
Regards
karthicHi
that is expected behavior. If you want to override click the portlet in the properties for the portlet you can specify an action as the refresh action (you could specify it as begin if thats what you need or any other action in your pageflow) .
regards
deepak -
Problem in EP while changing the layout of the default portal page
i am working with EP7.in this i encountered a problem when i tried to change the layout of the default framework page.
i created a new layout in NWDS and uploaded it to portal.then i copied the default framework page to separate folder (my personal) and assigned the newly created layout and set that page as my default framework page.
but whenever i log into the portal or refreshes the page the top level navigation iview merges (overlaps) with the masthead iview and comes back to the assigned position after some time.i tried many ways to solve this problem but i couldnt.
if anybody have any idea about it please share.....
regards,
karthickHi tamilventhan K
Please have a look at SAP Note No. 687485.
Hopefully this should solve your problem.
Cheers.
Award points for helpful answers:-) -
BI Administration Cockpit - Context menu in portal
Hi,
I have turned on the technical content, I can see all the necessary process chains etc and have set the necessary cubes for collecting in RSDDSTAT.
When I execute the process chains for data loading, I get errors because of invalid characters in the data which I'm dealing with. But I thought that once you can see the admin cockpit in the portal that you could right click on stats to further drill down to see more information. When I right click on cube name for example, I can see it is a hyperlink and should give me context menu but it doesn't.
Any ideas?
Regards
SueHi,
I have the same problem. Can anybody help please?
The context menu is working fine via executing in the Query Designer. Via the Web Application Designer (3x) it doesn't work. Same for the portal.
Should the context menu work anyway in the BI Cockpit?
Regards,
Patrick -
Performance Management - use offline layout on the SAP portal
Hello HR Performance Management experts,
I'm using a ECC6.0 portal, enhancement package version is 2.0.
How can I make the appraisal document appears on the Portal looks like the WORD document?
I'm thinking of using the Adobe form as the UI, which means I need to use the offline layout. ( with the BADI : HRHAP00_OFFLINE01)
But, I don't know whether this can work. And in that adobe form, can I have the funcion of "create" and "delete" objectives, or integrate with the Training management?
Can some one help to give some advices on this?
Thanks and Regards,Hi Denish:
Following link may not apply to your scenario but could give you some direction and ideas:
Changing the Default Browser Detection - Developing Web Dynpro ABAP Applications - SAP Library
Further more, specifics of your system set up may help us in understanding your situation better and perhaps we can offer more help.
Sincerely,
Amrit -
Report not showing the correct layout when executed in Portal
Hi All,
We have created 5 different queries in different units of measure for a query. We have included these in a web template, and based on the UOM choosen , the WAD will pickup the queries and provides the desired results.we have executed the report in Portal and created a bookmark for it...but if a different unit of measure, the layout is changing. Is there any way to create a bookmark which will not change by changing the Unit of measure means a different query.
Thanks,Hello Eranki,
Take a quick check on SAP Note 1671767 - BEX Variable Screen not showing via portal
Probably you are having issues related to personalization of your queries or templates on your portal.
Check it, remove and test again.
I hope it helps.
Best regards,
Edward -
Insert Layout Objects Menu is Missing
When I go to the menu Insert > Layout Objects is missing.
Or in the Insert window, it is missing there as well.A lot has changed in DWCC from previous versions.
Here is a page outlining the menu changes...
http://helpx.adobe.com/dreamweaver/using/changes-insert-options-creative-cloud.html -
Portal runtime error while selecting page layout in WPC editor
Hello,
in web page composer, editing page, when i click on "select page layout" I have a portal runtime error popup.
The logfile shows the following :
#1.5 #005056834112005E0000000C00000FA800048E28A94966CC#1282205196819#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#1016#149##n/a##7ff9c93eab6811dfa9c70000003307de#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###10:06_19/08/10_0010_3344350
[EXCEPTION]
#1#com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error occurs during the rendering of jsp component
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in java compiling
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: E:
usr
sap
EPD
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.netweaver.bc.util
lib
bc.util.public_api.jar(com/sapportals/wcm/WcmException.java):24: class WcmException is public, should be declared in a file named WcmException.java
(source unavailable)
1 error
I have the same by clicking on "check assignments"
Any help ?
ThanksHello Jego.
We faced the same issue after upgrade to EHP1 SP07 last week and managed to solve it by modification of layout.jsp and com.sap.nw.wpc.layoutmanager.LayoutBean within com.sap.nw.wpc.designtime.par. SAP's code requires an additional catch handler, so it is better to rise an OSS message.
As a workaround you may change a default layout for wpc main page (good for new pages) or manually edit output.xml for existing pages.
Best regards,
Aliaksandr Zhukau -
Urgent: How to create a new layout for portal lightframeworkpage
Expert,
I want to create a new layout for external facing portal. I have created a new par project also in NWDS, but being new I do not know where to get "com.sap.portal.layouts.default.par" and other supporting libraries.
Need an urgent help.
Thanks in advance
-Lave KulshreshthaHi,
Look into this blog to know, how to write custom layouts:
Nuts and Bolts of the External Facing Portal (EFP)
Once you wrote your layout jsp, then declare it in portalapp.xml like this:
<component name="example_narrowWide">
<component-config>
<property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
<property name="SafetyLevel" value="no_safety"/>
</component-config>
<component-profile>
<property name="ComponentType" value="com.sapportals.portal.layout"/>
<property name="com.sap.portal.pcm.Title" value="2 Columns (Narrow:Wide)"/>
<property name="com.sap.portal.pcm.Description" value="two-column layout displaying the narrow column on the right"/>
<property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
<property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld"/>
<property name="com.sap.portal.reserved.layout.TemplateFile" value="*yourLayout.jsp*"/>
<property name="AuthScheme" value="anonymous"/>
<property name="com.sap.portal.reserved.layout.Cont1" value="Left Column">
<property name="plainDescription" value="Column 1"/>
<property name="orientation" value="vertical"/>
<property name="designClass" value="prtlPageConL"/>
</property>
<property name="com.sap.portal.reserved.layout.Cont2" value="Right Column">
<property name="plainDescription" value="Column 2"/>
<property name="orientation" value="vertical"/>
<property name="designClass" value="prtlPageConR"/>
</property>
</component-profile>
</component>
As all the layout taglibs and required classes are in com.sap.portal.pagebuilder application, you should refer to it in your portalapp.xml SharingReference property.
Try all this and if you have specific questions, let me know.
Regards,
Praveen Gudapati -
Hi,
We are planning to use weblogic portal 8.1 beta version.
We have various user groups exist in our system (physician ,caregiver....).
We want to have different home page layout for these groups .
For example for physician, the home page may be of 2 column layout and for caregiver
it may be of 3 column layout.
In portal 4.0 there was a concept called "group portal" and we can assign different
page layout for these group portal.
Can we have something similar to that in 8.1b version.
I know a new concept introduced in portal 8.1b version called "role".
Do I need to create various role to fullfill my objective?
Do I need to create different user segments for that ??
Thanks,
AnjuThe documentation for the basic info on how to create a layout using regions is at
http://download-east.oracle.com/docs/cd/B14099_15/portal.1014/b13809/lookfeel.htm
Most of the pages I have created are the typical two-column layout in the middle (left column being the "narrow" column, right column being a specified no. of pixels or a percentage width) with a "header" region above and a "footer" region below, both of which cover the width of the regions in the two-column area. Each of those areas may also have multiple regions within it depending on what content will be published there and how you want that content display (ex. one portlet region with all display options and one portlet region without display options, and one item region.) Warning: the whole creating regions thing may drive you nuts trying to get them to do what you want them to do. :-) Play around on a few test pages to get the feel of creating and editing regions - adding portlets and items to the regions to see how they will look. Once you have figured out your page layout and how you want all your regions setup, I recommend creating that layout in a Portal Template -- under Navigator > Page Groups > Shared Objects > Portal Templates -- that can be applied to any pages in any page group that needs that layout.
To get the beginnings of a 2-column layout page with a header and footer region: Create two regions below the initial region that is on a page. In the middle region, create a region to the right. Edit each region to define its region type (portlets, items, or sub-page links), size, and other attributes. -
How to add a dynamic menu to the Portal?
Dear all,
I am restructuring the company's Intranet on which I plan to put a left-side vertical menu. On the menu, most links are accessible to all Intranet users except some KPI (key performance indicators) links which are only accessible to managers.
I am evaluating a third-party dynamic menu builder so called "Sothink DHTML Menu" which is javascript based and provides features for connecting to database via JDBC in jsp.
For static menu scenario, "Sothink DHTML Menu" is perfect for Oracle Portal in the sense of easy development and deployment.
For dynamic menu scenario, if I really want to use "Sothink DHTML Menu", I need to put the codes in jsp file and then place the jsp file on the Portal page. Here is the tutorial http://www.sothink.com/product/dhtmlmenu/store/jspdb/jspdb.htm
I still can't figure out how to do that. Can any experts here tell me how or suggest other alternatives for generating a dynamic menu on Portal?
Thanks
George (HK)Hi
I also use SoThink menus in Oracle Portal, but for static menus (I upload them in the HtDocs of Apache and then refer to them with an URL Item).
In my previous version of Portal I also had to display some kind of dynamic menus, some parts should only be visible to some users/groups. But I didn't use Sothink at this moment but "DHTML Menus" from an other company.
Starting from an example and using their libraries I wrote my own menu in javascript. In this .js I wrote some functions
- 1 that document.write(s) the start of the menu and the public part of the menu
- 1 that document.write(s) the reserved part of the menu
- 1 that document.write(s) the last part of the menu.
Then in a navigation page I defined 3 regions, each region contains some jscript code that launchs the function/menu part of the same range. And I used the item level security to set right access to the second region/menu part.
It worked fine, I just had to add some /* at the end of region 1 ent */ at the beginning of region 2 to remove the HTML code Portal writes between the regions.
But it was very time consuming if your menu changes often. -
Different Layout within a webflow for one Portal Page
Hi All,
Can I set different layouts within one portal page journey depending on the hyperlink
I click on one of the portal page with in a webflow.
My requirements is such that if user clicks on one of the link on one of the portlet,
I want to show them the next page with different content in a different layout
with in same portal page journey.
Can anyone post the sample code to achieve this.
Thanks
Nitin1 - you can not change the photo frame size if that is what you are asking
2 - you can enlarge the photo within the frame by selecting it and using the slider above the frame
3 - you can use a different page layout -- or even theme -- see Liz Castro's web site for examples of all available layouts for each theme -- http://www.lizcastro.com/iphotobookthemes/
LN -
Portal context menu is inactive
Hi all,
I am in process of creating a BI system on Portal, but the context menu on Portal Content folder does not display correct portal options, instead it's displaying IE conext menu.
I am logged on with J2EE_ADMIN with SAP_J2EE_ADMIN role.
Thanks.Hi,
Could you please help me too. I am also getting the same problem even though host is fully qualified name like aaa.bbb.ccc.net:50000/.. and referring to KM folders. Its not displaying the xml forms after pressing the hyperlink available under the km folder.
Line : 1
Char: 1
Error: Object expected
Code:0
URL: http://aaa.bb.cc.net:50000/...
Thank you for all your support
Best Regards
Jeb
Maybe you are looking for
-
Null pointer exception while executing a scenario from cloned work repo
Hi, I have involved in ODI 10g to 11g migration activity. For doing that activity, i cloned the existing master and work repositories into some intermediate master and work schemas. Created new configuration settings for pointing the odi 10g to the i
-
Inserting text to Acrobat PDF document, not able to create PDEText.
Hi , I have created a plugin for Acrobat, On press of MyPlugin's 'Insert' button it has to add the text to the document. Eg: If there is a Active PDF document, which contains a text "Hello" in it. I want to insert "World" (i.e, the document should ha
-
I need help with making multiple measurements
Hello, I have photoshop cs6 extended addition and was told photoshop would work for the research application I need but so far I am finding it very difficult to do what I want. Basically, I need to be able to meausre multiple lines (the red ones
-
Hi, i am creating an update query, i know I had problem before, but when i use this method, it works in one of the pages. Now i am having problem again. Don't know why. Here are the 2 methods i used, both failed. method 1: String sqltextupdate = "UPD
-
Hello, Is there a way to fill up a combo box that is not by adding line by line with the collection of ValidValues? In VB.Net there is a property call DataBinding that allows to link the combo box with a DataTable, that makes the combo box load immed