Layout of windows

how do you get back to the original format for the windows? i opened FCE and the timeline and viewer window is missing.

http://www.fcpbook.com/Misc7.html

Similar Messages

GUI Interface to layout your windows

Hello! I was wondering if anyone knew of a GUI interface that helps layout your windows? Example, a screen that lets you add buttons, text fields, etc. and then gives you the source could behind it. I basically need the help with the layout information (FlowLayout, GridLayout, etc.). Thank you for any information you can provide.

Check out the UICompiler. First you do the drag and drop in QT Designer, then it compiles the QT description files into Java/Swing classes.
http://uic.sourceforge.net/

Subnet config and switch layout for windows 2012 ISCSI server

I would like to ask about subnet design and switch layout in regards to using a Windows 2012 ISCSI solution. When you guys design subnets for ISCSI configurations do you use one subnet or multiple subnets? Also do you link the switches together when
designing your ISCSI layouts? These types of things are normally discussed in vendor deployment guides. However, I have not come across a best practices guide for deploying Server 2012 ISCSI.

I would like to ask about subnet design and switch layout in regards to using a Windows 2012 ISCSI solution. When you guys design subnets for ISCSI configurations do you use one subnet or multiple subnets? Also do you link the switches together
when designing your ISCSI layouts? These types of things are normally discussed in vendor deployment guides. However, I have not come across a best practices guide for deploying Server 2012 ISCSI.
For iSCSI you typically create a separate subnets around physical NICs you use for iSCSI traffic (assuming they are used by iSCSI target for MPIO of course). Here are few guides on how to do that (some for Windows Server 2008 R2 but you can ignore that fact
as target itself did not change much and concepts are still the same). See:
Configure iSCSI MPIO on Windows (full)
http://blogs.technet.com/b/migreene/archive/2009/08/29/3277914.aspx
(make sure you have at leas one connection before you try to enable MPIO)
Setting up a Target and Initiator
http://www.server-log.com/blog/2011/7/26/setting-up-an-microsoft-iscsi-target-and-initiator-using-mpi.html
You need however be aware of a couple of facts...
1) MSFT does not see much future in iSCSI and is replacing it with SMB3 where it can. So if you want to use iSCSI to provide shared storage to your guest VMs you need to use shared VHDX hosted on SMB3 share, see:
Shared VHDX for guest VM Cluster
http://technet.microsoft.com/en-us/library/dn265980.aspx
If you plan to use iSCSI to host CSV and VM images there you again can use SMB3 share, see:
Hyper-V over SMB
http://technet.microsoft.com/en-us/library/jj134187.aspx
That's both simpler to manage (you don't configure anything except teaming for NICs to enable SMB Multichannel and create a shared folder in a few clicks) and faster: MSFT iSCSI target is not cached @ server side while (OK, Hyper-V ovens VMs in a pass-thru
mode but other users typically don't do that). SQL Server is the same as Hyper-V in terms of SMB3 support, Windows clusters support SMB3 share as a witness and so on.
2) That's a single point of failure. Think about using SoFS instead of a single SMB3 share and think about clustering your target (you'll need a separate fault tolerant back end of that) to increase uptime. See:
MSFT iSCSI Target Failover Cluster
http://techontip.wordpress.com/2011/05/03/microsoft-iscsi-target-cluster-building-walkthrough/
Good luck! :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Layout of Windows Diagram View not in DTR

Hello,
After painstakingly having laid out all the viewsets to get a decent overview of the actual viewset navigation I had to remove the project and its contents from my development machine and recreate it. Apparently the layout of the viewsets is not something that's stored in the DTR.
But since the layout does seem to be saved (it's there after closing and restarting the NWDS), I'm wondering if it's possible to add the relevant file(s) to the DTR so my fellow developers can also benefit from a pleasant viewset layout.
So in essence, my question is, where is/are the file(s) located that store the actual layout of the window diagram view?
Thanks,
Kars.

I went ahead and tried anyway.
Adding the Model Folder directory went OK, but adding the actual diagram files could only be done from the DTR perspective.
Doing a regular sync on another development machine gave errors, even after deleting the entire Model Folder directory. Doing a forced sync seemed to fix this, but that's a rather invasive action.
Even so, the Window Diagram didn't show up correctly, and, assuming the file in question is named Foo.txWDWindowDiagram, we ended up with another file, Foo1.txWDWindowDiagram.
The Component Diagram did appear to work though. Still considering the amount of coercion needed to get it to sync properly, we've decided to remove the files from the DTR.

Start Screen Layout with Windows 8.1

Hi Team,
Just wondering if below Technet article for capture and deploy start screen layout applies to windows 8.1\windows 8.1 update 1?
http://technet.microsoft.com/library/jj134269#BKMK_AppFolder
As far as i understand these 3 methods are good with windows 8.0 but with Windows 8.1 , capture layout with
Export-StartLayout and using GP is applicable. Any pointers will be appreciated.
Regards,

check these:
http://stealthpuppy.com/customizing-the-windows-8-1-start-screen-dont-follow-microsofts-guidance/
http://blogs.technet.com/b/canitpro/archive/2013/12/19/step-by-step-windows-8-1-start-screen-customization-via-powershell.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How do I load panel layout from Windows- Workspace

When trying to open Dreamweaver CS4 this error appears:
following panel layout is missing or could not be read: MACHD:Users:archeemoffitt:Library:Application Support:Adobe:DreamweaverCS4:en_US:Configuration:Workspace:Designer.xml
load one from Windows->Workspace

Navigate to
MACHD:Users:archeemoffitt:Library:Application Support:Adobe:DreamweaverCS4:en_US:Configuration:Workspace
Delete the Design.xml file (which is corrupted or missing)
Launch Dreamweaver and it will recreate the Design.xml file.

UEFI + GPT + SSD + HDD, partition layout for windows and archlinux

Hi,
I have got new computer based on UEFI. It has one ssd and one hdd. I would like to install windows 7 64bit and archlinux, both disks GPT partitioned.
I would like to do it this way:
SSD:
/dev/sda1 - UEFI partition
/dev/sda2 - windows system
HDD:
/dev/sdb1 - windows data
/dev/sdb2 - /
/dev/sdb3 - /home
/dev/sdb4 - swap
my question is: where should I put /boot partition? Should it be on SSD or HDD? Will placing /boot partition on SSD make bootup faster?

I don't use a separate /boot partition. In my opinion, that's only needed if you boot multiple operating systems (ie. more than 2), because it can help with not having to worry about reinstalling the bootloader if you ever decide to reinstall one of them or replace it with something else. Some people cringe at the thought of not having a bootloader to get into a pretty GUI where they can click stuff. But it's really not that difficult to boot a "live" Linux distribution from a USB stick, chroot and reinstall the bootloader. I mean, you are using Arch. Using the command line should be a cinch.

Windows 8.1 On-Screen Keyboard shows comma in numeric layout

Even changing my regional settings to use the full stop "." I still get the comma in the numeric layout of the On-Screen Keyboard. Changed the location/region to South Africa as well, still not helping.
Is there any way to change this?

Hi,
What about change keyboard layout?
How do I change the keyboard layout in Windows 8.1?
http://acer-au.custhelp.com/app/answers/detail/a_id/32046/~/changing-the-keyboard-layout-in-windows-8.1
Would you please send back the screenshot of On-screen keyboard?
Kate Li
TechNet Community Support

Windows is forgetting shortcuts designated for keyboard layout switching after waking up from sleep

I have a configuration of Ctrl+1,2,3,4,5 shortcuts for switching keyboard layouts on Windows 8.1. Once I boot up my laptop they work just fine and the layouts shortcuts setup window looks like this if I open it:However now when I close my laptop, putting it into sleep mode, and then open it again, the keyboard shortcuts stop working and if I open the aforementioned setup window, it also looks as if I have none configured: To get my shortcuts back after sleep mode I have either to reboot the laptop, or assign the shortcuts again manually. This is a problem I've experienced before on this same machine (Lenovo Yoga 13) with Windows 8 (before the 8.1 update) and I guess at that time it dissapeared after some editing of the list of layouts I use.
But now I've added some layouts to the list, and then removed some of them and so on and here is what I get again.Maybe there is some branch of Windows Registry involved with the layouts and keyboard-shortcuts messed up and I could simply remove the registry branch and start with a clean slate?

I have never seen this Windows before, I unfortunately do not understand Russian.
Here is the Russian community:
https://forums.lenovo.com/t5/Сообщество-Lenovo/ct-p/Community-RU

Set As Default Crystal Report Layout in SAP B1 8.8 PL13

Hi,
I want to Set As Default a Crystal Report Layout. I know you can do that in Layout Desginer - Selection Criteria, but SAP B1 8.8 PL 13 has only a Manage Layout button in the Layout Desginer window which links to the Report and Layout Manager. There is no Set As Default button.
Where can you select which layout to be default in PL13?
Thanks!
Cristina

Hi
If you want to Set as Default particular PLD then Open that Form
For. Example
Sales Ar > A/R Invocies (Item) document
Then Click on PLD icon ans select your crystal report as Default by Set as Defaul button.
Thanks
King Kevin

How to create authorization to access Query Print Layout?

Hi again..
i have 10 query print layout, and not every user can view this layout.
I assume,
report 1-3 only for user A,
report 4-7 only for user B, and
report 8-10 only for user C.
How to create autorization for Query Print Layout?
Thankyou for the help

Dony,
In order to createthe PL's of customize report (from Query Manager) you will have to go the Tools Tab of the Menu Bar in which you will have to click the Queries tab which will lead to a drop down menu which when clicked will lead to Quaery Print layout. You will have to choose your query based upon whether from the reports tab double click it to open the Query Print Layout Designer.
Here again in the Menu Bar you will find the under the Tools the first tab is the PLD which when clicked you can do the same process as explined below
When you go to the document ( Any Document ) in the tool bar you would find the 24th Icon to be the Print Layout Designer Tab when you click this it takes you to the layout designer window.... below there is tab named set as default when you click this the system would ask you 2 choices
1. Set as default for all users
2. Set as default for current user
Which means that you will have to open each and every form?
for each and every user and set them as default for the user.
If you feel this answer is helpful then please do remember to reward points
Regards,
Nagesh.

DeActivate - Dunning Levels - Setup Window

In running the Dunning Wizard process we have designed the Dunning Letter forms thru PLD. Our customer has activated the Dunning Levels - Setup Window thru the Main Menu Form Settings. The Dunning Wizard now does not print the forms as designated in the PLD. It seems to be picking from the three default forms associated with the Dunning Levels - Setup Window. How do you de-activate this window?

Could you check which template is set as Default for each of the levels.
There are Dunning Level 01 (template DLN0), Dunning Level 02 (template DLN2), .. so on
In the Print layout selection window make sure you have the correct template set as default.

Wrong default layout for a new customer

Hi all,
I hope somebody can share inputs with regards to this issue.
I'm assigning a default layout to one customer group (layout1 for all Group1). When this was done, a list of customer codes were included in the list and each were ticked from that list.
Second layout called layout2 for the setting 'Set &as Default for all BPs (for Whom a Default Layout Has Not Been Assigned).
Scenario: A new customer code is created belonging to Group1.
Issues:
            a. This new customer code does not automatically follow the setting on default layout which is layout1. When the layout1 default setting was double
                 checked, the new customer code was part of the list, but it was not ticked.
            b. When document was previewed, it uses the wrong layout2.
            c.   The user still has to update the layout1 default setting, ticking the tick box from the list for the new customer code, then clicking update in then
                  layout designer window.
Question: Is this a normal behaviour of the system? I thought that setting it as default for certain customer group will be applicable even to newly created ones under that group.
Regards,
Cathy

Hi,
I am afraid that it is your SAP B1 version current behavior but you may check using demo database. What is your SAP B1 version anyway ? what is your database localization ?
You may try the solution part from one of these notes below:
993486 - 'Set as Default for All BPs' doesn't affect specific BP
Version 5 Validity: 21.01.2011 - active
Language English (Master)
Portuguese
Content:      Summary    |    Header Data    |    References    |    Validity
Symptom
Specific printing template for Business Partner can not be changed in attempt to define printing template as a default template for all Business Partners.
Cause
Functionality description
Solution
In order to change a specific default printing template for Business Partner follow the steps below:
1. Choose the required template and press on the 'Set as Default' button.
2. Choose the 'Set as Default for Specified BP' and 'Set as Default for Current User' option.
3. Uncheck the box near the BP name and press on the 'Update' button.
4. Choose the required default template (new template) and press on the 'Set as Default' button.
5. Choose the 'Set as Default for all BP' option.
Other terms
Print Layout Designer, Default Template, Set as Default for All Users,
Set as Default for Current User, Set as Default for All BPs, Set as Default for Specific BP
        Header Data
Released On
24.02.2011 20:52:30
Release Status
Released for Customer
Component
SBO-GEN-PLD Print Layout Designer
Other Components
SBO-SH-PLD-A2 Tips and tricks for building PLD templates
Priority
Recommendations/additional info
Category
Consulting
       References
This document refers to: SAP Business One Notes
861088
Cannot set a template as default for all users
This document is referenced by:   SAP Business One Notes (1)
861088
Cannot set a template as default for all users
       Validity
Software Component
Version
SAP BUSINESS ONE
2005 A
2005 A SP01
2005 B
2007 A
2007 B
8.8
2nd note:
861088 - Cannot set a template as default for all users
Version 4 Validity: 04.08.2009 - active
Language English
Content:      Summary    |    Header Data    |    References    |    Validity
Symptom
When print previewing,the template used is not default template.
Cause
A template has been defined as default for all users, when previewing this it is not the template which has been set as default for document.
Solution
In order to change to a different default template for all users and all business partners please do the following:
a) "Set as default for specified Business Partner" and "set as default for current user"
b) Add tick for this Business Partner
c) Update by ticking again the specific Business Partner
d) Change set as default for all users and all Business Partner's
Other terms
Print Layout Designer, Default Template, All users, Set as Default template, SAP Business One
        Header Data
Released On
04.08.2009 11:28:58
Release Status
Released for Customer
Component
SBO-GEN-PLD Print Layout Designer
Other Components
SBO-SH-PLD-A1 Print Layout Designer known Issues
Priority
Recommendations/additional info
Category
Consulting
       References
This document refers to: SAP Business One Notes
993486
'Set as Default for All BPs' doesn't affect specific BP
This document is referenced by:   SAP Business One Notes (1)
993486
'Set as Default for All BPs' doesn't affect specific BP
       Validity
Software Component
Version
SAP BUSINESS ONE
2004 A
2005 A
2005 A SP01
2005 B
2007 A
2007 B
JM

Scripts totals prinint in main window

Hi,
i want to print gross value, discount,output tax and total amount after printing all line items in main window. can any one tell me where i have to write the code for this gross value, discount,output tax and total amount. i mean how to check the condition that all lines are over to print gross value, discount,output tax and total amount. i need to print this information at the bottom of main window. can any one pls let me know the process.
Thanks & Regards
Munna

Hi Syed..
In the Layout MAIN WINDOW:
1. Create a Text element after the Text element that displays the line items:
/E LINE_ITEMS
&WA-MATNR&,, &WA-MENGE&
/E ELE_TOTAL

Total = &V_TOTAL&
2. In the Print program
Calculate the Total into the Variable V_TOTAL
Then Call the WRITE_FORM after the LOOP .. ENDLOOP
LOOP AT ITAB INTO WA.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'LINE_ITEMS'
TYPE = 'BODY'
FUNCTION = 'SET'
WINDOW = 'MAIN' .
ENDLOOP.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ELE_TOTAL'
TYPE = 'BODY'
FUNCTION = 'SET'
WINDOW = 'MAIN' .
reward if Helpful.

Using an AZERTY keyboard with Windows 7 via parallels

Hi, really hope you can help, its very frustrating! I've got a macbook (10.6) with a french azerty keyboard. Its all fine using applications directly on the mac but when i use windows 7 via parallels, I don't get the correct symbols eg the button to the left of the 1 key is @ (or a # when shift is pressed as well)
I've tried changing the language to all the different french options eg canadian, moroccan etc but none of them have the correct layout
thanks in advance for any replies/advice

You probably need to change the keyboard layout in Windows
From his reference to French Moroccan I suspect he has already tried that. The problem may be that no Windows layout exactly matches the Mac layout, as is the case with several languages. But maybe there is a work-around short of someone having to create a Windows custom keyboard layout.

Layout of windows

Similar Messages

Maybe you are looking for