Layout Problems in Design View
Our wedsites use server side includes that control the way
the page is laid out. My design view is not laid out the way it
should be. If I go to the preview, it is perfect, but from the
design view in Dreamweaver things are out of order. My navigation
menu is hanging over my text, and I can't seem to get it to
properly lay out on the page. Does anyone know how to fix this? I
can email a copy of the page view if anyone wants to see it.
Thanks!
DW is perhaps confused by your doctype which seems to be
suggesting both
XHTML Strict and XHTML Transitional -
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict"
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
I would say fix that, and the other validation errors from
http://validator.w3.org first,
and then we'll look at the page again.....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"TyhitiaF" <[email protected]> wrote in
message
news:ecl1dh$5a3$[email protected]..
>I can show you what is is suppose to look like. If you go
to the page
>below
> you can see what the pages look like online. My problem
is, in design
> view of
> dreamweaver, the information about section to the left
is placed over the
> information to the right. Then all of it is shifted to
the left.
>
>
http://www.ualr.edu/admissions/
>
Similar Messages
-
Problem with Design View in DW5
I've recently inherited responsibility for my group's website (despite the fact that I'm kind of a noob at all this) and am dealing with an interesting challenge that I hope someone can help me with.
It seems that our pages are based on a number of templates that for some reason were not saved along with the rest of the site. Short term this is not a huge issue, as the pages have the source code from the templates embedded in them, but this code is not editable and I can't figure out a way to override the fact that I'm "locked out" from making any changes (at least from within Dreamweaver). Up to now I've just been editing the pages individually in Komodo, which is tedious but not horrible, given that our site isn't that big, but it's clearly no way to do business in the long term.
So I'm trying to re-engineer some templates that I can work with. What I did was use Komodo to strip away all of the template-related language from one of the site pages, and re-imported the code back into Dreamweaver, in the hope that I can then save that as a new template. I'm close, but not quite there. My problem is that DW's Design View isn't rendering the page properly, even though it displays fine in Live View and in browsers. Maybe this isn't a huge deal, but it's really bugging me because: 1) I do rely on Design View, since I'm not an experienced programmer; and 2) I'm kind of anal retentive.
To see what I'm talking about, here is the page I used as the foundation for creating a new template:
http://iodp.ldeo.columbia.edu/TOOLS_LABS/TRIPLE/aps.html
... and here is my new "template" (although I haven't saved it yet as a DW template):
http://iodp.ldeo.columbia.edu/TOOLS_LABS/TRIPLE/test3.html
The second page displays correctly in Live View, Safari and Firefox, but not in DW's Design View, where it looks like this, at least on my computer:
As you can see, there's an odd "break" between the banner image and the menus on the left, and the body of the page, which should appear to the right of the menus on the left, is instead underneath them. I'm at a loss as to why the same code displays properly for the first page, but not the second.
I guess my questions are as follows:
1) Does anyone else get the same messed up display in DW's design view if they import the second page into DW?
2) And if so, can you pinpoint where the problem is?
I hope I've explained this clearly and would really be grateful for help. Thanks!Validate your code and fix errors. #1 problem is the lack of a valid Document Type Declaration (DTD) on line 1 of HTML code.
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
To add a DTD in DW:
Go to Modify > Page Properties > Title/Encoding.
Select document type from drop list. I recommend HTML 4.0 Transitional.
Hit Apply & OK.
Repeat Steps 1 - 3 on remaining site pages.
I'm not a huge fan of DW Templates (.dwt). I don't know how big your site is but it might be simpler to disconnect from Templates, giving you freedom to edit anything you wish. Then use Server-Side Includes (SSIs) for common site wide elements such as menus, headers & footers.
The great thing about SSIs is that you only need to edit one file, save it and upload to server. Site pages are automatically updated by the server. With Templates, you have to upload every child page each time you change your template. Even on small sites, this is tedious.
Server-Side Includes
http://www.smartwebby.com/web_site_design/server_side_includes.asp
More on Server-Side Includes
http://forums.adobe.com/message/2112460#2112460
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/ -
Link to CSS problem (in Design View)
Hello Dreamweaver experts,
In the Design View Dreamweaver CS3 is not picking up the
styles specified in a linked stylesheet. Let me explain...
I am using an application in our office that relies upon HTML
(but does not use a standard web browser).
I need to refer to linked stylesheets using a variable like
so;
[example #1]
<link href="{FILES_DIR}/path/css/stylesheet.css"
rel="stylesheet" type="text/css" />
The use of the variable construction "{FILES_DIR}" eliminates
the need to hard code a drive letter into the link which is
preferrable. Without "{FILES_DIR}" I have to hard-code the drive
letter like so;
[example #2]
<link
href="file:///K|/additional-path-details/path/css/stylesheet.css"
rel="stylesheet" type="text/css" -->
Both examples above yield the same result in the application
(the stylesheet is found and its styles properly applied).
However, only with example #2 does Dreamweaver's "design
view" pick up and apply the stylesheet. Dreamweaver cannot find the
stylesheet or apply its styles using example #1.
My question is how can I make Dreamweaver understand and
apply what "{FILES_DIR}" means.
Any tips, tricks or pointers would be most welcome..."horse.badorties" <[email protected]> wrote
in message
news:fh9o12$80d$[email protected]..
> Hello Dreamweaver experts,
>
> In the Design View Dreamweaver CS3 is not picking up the
styles specified
> in a
> linked stylesheet. Let me explain...
>
> I am using an application in our office that relies upon
HTML (but does
> not
> use a standard web browser).
>
> I need to refer to linked stylesheets using a variable
like so;
>
>
[example #1]
> <link href="{FILES_DIR}/path/css/stylesheet.css"
rel="stylesheet"
> type="text/css" />
>
> The use of the variable construction "{FILES_DIR}"
eliminates the need to
> hard
> code a drive letter into the link which is preferrable.
Without
> "{FILES_DIR}"
> I have to hard-code the drive letter like so;
>
>
[example #2]
> <link
href="file:///K|/additional-path-details/path/css/stylesheet.css"
> rel="stylesheet" type="text/css" -->
>
> Both examples above yield the same result in the
application (the
> stylesheet
> is found and its styles properly applied).
>
> However, only with example #2 does Dreamweaver's "design
view" pick up and
> apply the stylesheet. Dreamweaver cannot find the
stylesheet or apply its
> styles using example #1.
Did you look into "design-time" styles sheets? That may solve
your problem.
It won't take care of the path in the document though...
Thierry
Articles and Tutorials:
http://www.TJKDesign.com/go/?0
http://www.divahtml.com/products/scripts_dreamweaver_extensions.php
- divaGPS - Add "you are here" highlighting to virtually any
menu
- divaFAQ - Create FAQ pages that toggle (show/hide) the
answers
- divaPOP - Easy, clean, standards-compliant popup windows. -
Hi All,
I don't know why i can't display the designer view. Anybody can help me?
or if you want more information, i can tell you.
Regards,
LukeHi Luke,
Designe veiw means you are not getting layout??
First cehck this.. Goto the layout tab of the view. u will see an option of '.Show/Hide Layout Preview'.
Still not getting, your sys not configured properly.. Check FQDN
http://help.sap.com/SAPHELP_NW04S/helpdata/en/67/be9442572e1231e10000000a1550b0/content.htm
and Goto SICF transaction activate relevant services..
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/d28dfa34bb12bee10000000a1553f7/content.htm
Also cehck HOST name..
view layout is not displaying, ( The page cannot be displayed)
Cheers,
Kris. -
Problems with design view after moving to new imac
Moved CS4 Dreamweaver from my Mac Mini intel duo to a new i5 Imac last night: suddenly design view is not showing various CSS styles, especially certain links.
For example, instead of this:
HOME | ABOUT | CONTACT | HELP
it will show this in design view:
|||
Meanwhile, in a browser live on the web, everything is fine.
I did a fresh install of dreamweaver CS4 last night from original install disks to new i5 Imac.
Help!Culprit is the classic MS Windows font ARIEL. I installed it one at a time from two different sources (a 1999 TT build and a 2001 TT build) and both immediately caused problems, particularly in Dreamweaver with vanishing text in design view for any fonts setting sassigned the "ariel, helvetica sans serif family").
Since problem only is happening on the 2011 i5 Imac (but not on my old Mac Mini 1.6 or emac G4) I will guess the dilemma resides with fontbook or something peculiar to font management on the iMac.
Removing font of course solved all problems. -
Problem with Design View display
Hi,
Working happily in Design view using RH 10, and from one moment to the next the Design View display changed. The font display has changed to a truncated style and the word wrap has disappeared.
I tried rebooting and then reinstalling and no luck in getting rid of the issue.
The output is fine and as expected, so I am presuming that it isn't the CSS. Which I haven't edited for eons anyway so it really shouldn't be that anyway.
This is happening on all my help projects - each with a different CSS - so it can't be the css unless RH did some sort of strange global change behind the scenes without my knowledge.
Any thoughts on how to get Design View to display normally would be much appreaciated,
Thanks,
TannisHi there
One possible suspect you may be unaware of is pressing and holding the Ctrl key as you rotate the wheel of a mouse. There may be a keyboard shortcut that would do this too.
Cheers... Rick -
Problem with design view (DW8)
Page display correctly in IE7 browser but not in design view.
Right sidebar is appearing in the middle of the page. Page is using
CSS and the div is using float left.
Can someone tell me what the possible issues could be?
Thanksjdrhost wrote:
> Page display correctly in IE7 browser but not in design
view. Right sidebar is
> appearing in the middle of the page. Page is using CSS
and the div is using
> float left.
Design view is not WYSYWYG. It's very good, but not perfect.
Preview in
browser is the only accurate check of how a design will be
rendered.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
I just converted a number of my sites over from GoLive CS2 to
Dreamweaver CS3. All the sites seem fine but when I go to look at
any pages in the Design pane (they use a template) of one of my
sites, the table is collapsed. (Yes, I am using nested tables
because of the way my shop is set up with my eCommerce.) But if I
can see everything fine in GoLive's Layout Tab then why can I not
see it in Dreamweaver like that.
Screen Print of GoLive
http://img409.imageshack.us/img409/6554/8pawgolivexf2.jpg
Screen Print of Dreamweaver
http://img527.imageshack.us/img527/8849/8ppawsdwsl7.jpg
Can you please view the source code at
http://www.8pawsup.com and find
where the problem may be. Or, if it is just a setting in
Dreamweaver, please let me know because, like I said before, my
other sites are fine in both except for this one. That is why I am
leaning towards it being a coding problem.
Thanks!One of your most useful debugging tools is to validate the
page before
anything else.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"steffen74" <[email protected]> wrote in
message
news:fto9au$gp4$[email protected]..
> You are too awesome! I was sure it was just an oversight
on my template!
>
> Thanks a ton! -
Hai,
I am Designing a form using webdynpro. In that i need to put two input fields in side a rectangualr image. How is it possible in webdynpro.
Please help me asap.
RegardsHi,
Use gridLayout beacause it divides the window into coloumns .......so even though the text size is manipulated it will not affect the allignment....
for the transparent containeer set the colcount to the max no of columns u want .......and add component to it if a control needs to acquire more columns then set the colcount property of control to the no of columns u want to acquire.....
regards,
Yash -
Design view not showing true design
I'm using Dreamweaver CS3, and have an issue with design
view.
I was editing the content of a page in design view, applying
styles from my main.css, when the page I was working on suddenly
lost all its styles, including heading & paragraph styles, and
placement of most div tags.
My header and the div tags inside that are still visible, as
is the side navigation, although the background image for the side
navigation is not. It seems to be all my editable regions that have
decided not to show correctly.
I've checked other pages and templates based on the main.css,
and they all appear to have the same problem.
The good news:
1. The CSS Styles inspector on each page shows it is attached
to the main.css, but lists only three styles under that style
sheet, all of which are named 'td img'.
2. The main.css itself looks fine. All my styles are still
there.
3. When I preview my site in a browser, it looks as it
should, so presumably it IS still attached to the style sheet, it's
just not showing properly when I'm working on it.
Any clues as to what's going on?
As I'm sure everyone says, this is kind of urgent, so any
help anyone can offer will be very gratefully received!
Thanks in advance for any help you can offer!
EDIT: I've been playing around with previewing the site in a
browser again, and have encountered another issue, which may be
related. I can preview a preliminary page, but all my links take me
to a 'this page cannot be found' error message. I was pretty sure
it wasn't doing this when I first encountered the problem with
design view, but I could be mistaken. Has something happened to the
internal links on my site, perhaps?In the View menu go to Style Rendering. Make sure Display
Styles is checked.
Walt
"Cyrus_Ice" <[email protected]> wrote in
message
news:fga649$m61$[email protected]..
> I'm using Dreamweaver CS3, and have an issue with design
view.
>
> I was editing the content of a page in design view,
applying styles from
> my
> main.css, when the page I was working on suddenly lost
all its styles,
> including heading & paragraph styles, and placement
of most div tags.
>
> My header and the div tags inside that are still
visible, as is the side
> navigation, although the background image for the side
navigation is not.
> It
> seems to be all my editable regions that have decided
not to show
> correctly.
>
> I've checked other pages and templates based on the
main.css, and they all
> appear to have the same problem.
>
> The good news:
> 1. The CSS Styles inspector on each page shows it is
attached to the
> main.css,
> but lists only three styles under that style sheet, all
of which are named
> 'td
> img'.
>
> 2. The main.css itself looks fine. All my styles are
still there.
>
> 3. When I preview my site in a browser, it looks as it
should, so
> presumably
> it IS still attached to the style sheet, it's just not
showing properly
> when
> I'm working on it.
>
> Any clues as to what's going on?
>
> As ever, this is kind of urgent, so any help anyone can
offer will be very
> gratefully received!
>
> -
Design View is Blank in CS5.5
Hello, I have had problems with design view since upgrading from CS3 to CS5.5. In fact, it has never worked for me. Design View is completly white.
I'm on a Mac, running OS X 10.7.3.
This isn't an issue with bad code, it's all the time. I can start a new document, type one word inside the body in code view and switch to design view and nothing is there. If I click in the white space on design view, I can type there and it will show when I go back to code view, but it won't show anything in design view while I'm typing.
This is not an issue with the "Head Content" covering everything up. I can toggle that on and off. I can also turn the rulers on and off and they show. But nothing on the page I'm working on will show.
Also, "Live View" works fine.
Any ideas? I'm totally stumped.
Thanks!Bad fonts?
http://helpx.adobe.com/x-productkb/global/troubleshoot-fonts-mac-os-x.html
Bad workspace?
http://forums.adobe.com/message/4272813#4272813
Bad or incomplete install?
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/ -
Design view is unavailable for x64 and ARM target platforms. - Visual Studio 2013 Update 3
Hello. I am having this problem at design view when i set project to x64. However problem disappear when i set to any cpu which makes it 32 bit.
Design view is unavailable for x64 and ARM target platforms.
Here my full XAML code
<Window x:Class="doktora_tez_projesi_crawler_program.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="clr-namespace:doktora_tez_projesi_crawler_program"
Title="Doktora Tez Crawler" Height="874.099" Width="1092.99">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="827*"/>
<ColumnDefinition Width="258*"/>
</Grid.ColumnDefinitions>
<Button Content="Init Root Crawlin - This Deletes All Data" HorizontalAlignment="Left" Margin="10,10,0,0" VerticalAlignment="Top" Width="279" Click="click_start_Crawling" />
<ListBox Name="lstBoxEvents" HorizontalAlignment="Left" ItemsSource="{x:Static local:PublicStaticFunctions.ocEventsCollection }" Height="138" Margin="10,155,0,0" VerticalAlignment="Top" Width="1065" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxMoreCommonFiredEvents" HorizontalAlignment="Left" ItemsSource="{x:Static local:PublicStaticFunctions.ocEventsCollectionMoreCommonFiredEvents}" Height="265" Margin="10,298,0,0" VerticalAlignment="Top" Width="1065" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxLinkCountFireEvents" HorizontalAlignment="Left" ItemsSource="{x:Static local:PublicStaticFunctions.ocEventsCollectionLinkCountEvents}" Height="265" Margin="10,568,0,0" VerticalAlignment="Top" Width="1065" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxGlobalStatistics" ItemsSource="{x:Static local:GlobalStats.myObserveGlobalStatics}" HorizontalAlignment="Left" Height="114" Margin="10,36,0,0" VerticalAlignment="Top" Width="426">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxGlobalStatistics_2" ItemsSource="{x:Static local:GlobalStats.myObserveGlobalStatics_2}" HorizontalAlignment="Left" Height="114" Margin="441,36,0,0" VerticalAlignment="Top" Width="634" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<Label DataContext="{x:Static local:PublicStaticFunctions.ocEventsCollection }" Content="{Binding Path=[1]}" HorizontalAlignment="Left" Margin="324,10,0,0" VerticalAlignment="Top"/>
</Grid>
</Window>
Browser based Pokemon Style MMORPG Game Developer Used asp.net 4.0 routing at it's
MonstersHi MonsterMMORPG,
I made a mistake in my previous reply. What I suggested is that you created a new and simple WPF app, set the platform to
x64 rather than x86, and then build the app to check the result.
If a new WPF app also has this issue, then I doubt whether this issue is related to your VS.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
no it doesn't happen
it is triggered by one of these bindings in the xaml
<ListBox Name="lstBoxEvents" HorizontalAlignment="Left" ItemsSource="{x:Static local:PublicStaticFunctions.ocEventsCollection }" Height="138" Margin="10,155,0,0" VerticalAlignment="Top" Width="1065" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxMoreCommonFiredEvents" HorizontalAlignment="Left" ItemsSource="{x:Static local:PublicStaticFunctions.ocEventsCollectionMoreCommonFiredEvents}" Height="265" Margin="10,298,0,0" VerticalAlignment="Top" Width="1065" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxLinkCountFireEvents" HorizontalAlignment="Left" ItemsSource="{x:Static local:PublicStaticFunctions.ocEventsCollectionLinkCountEvents}" Height="265" Margin="10,568,0,0" VerticalAlignment="Top" Width="1065" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxGlobalStatistics" ItemsSource="{x:Static local:GlobalStats.myObserveGlobalStatics}" HorizontalAlignment="Left" Height="114" Margin="10,36,0,0" VerticalAlignment="Top" Width="426">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxGlobalStatistics_2" ItemsSource="{x:Static local:GlobalStats.myObserveGlobalStatics_2}" HorizontalAlignment="Left" Height="114" Margin="441,36,0,0" VerticalAlignment="Top" Width="634" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Browser based Pokemon Style MMORPG Game Developer Used asp.net 4.0 routing at it's
Monsters -
How to correct design view?
I got a strange problem in Design View: I set up Foundation 3. Works fine, shows exactly as it should be in a browser preview. But it shows horrible in design. Normally I work in the split view. Code on top, design below. Right now I might as well work with Notepad only.
It is possible it's a border problem, I had that in the past. Removing the border on a div solved the issue. But I can't do that here, because that is the very basis on which Foundation 3 works.
How do I correct this?Perhaps CS7 will be on a par with modern browsers. CS6 is still about as
good as a 5 year old browser - sometimes. If you are using fairly
complex CSS, I would simply turn off CSS rendering in Design View so you
can edit content and rely on Live View (fairly good in CS6) or a real
browser preview to check your page.
Al Sparber - PVII
http://www.projectseven.com
The Finest Dreamweaver Menus | Galleries | Widgets
Since 1998 -
Why does my page look great in design view and to the left in live view?
I just created a new page using a fluid grid layout and in "design" view it looks great but in "live" view or on a browser preview the wording all goes to the left. What I am doing wrong? I also have another question which may relate to the first. I have four templates. Do I create a new named .css file for each new template or continue using the same layout.css file for all templates? Since I created a new .css file for every template maybe it is causing confusion. Thanks in advance.
If this is what you want, rework your HTML so all three images are in the same div and adjust your css to narrow the scroll down image and on Order jpg, vertically align top, 30px margin.
<div id="header">
<div id="pic1">
<img src="Thumbs/Scroll-Down.jpg" alt="More Pictures">
<img class="goldborder" src="NewImages/englilshivymain.jpg" alt="">
<a href="#OrderHere2">
<img alt="Order Here" src="Thumbs/OrderHere.jpg">
</a>
<br>
English Ivy (Detail)
</div>
<div id="pic4"> -
Style Message in design view with Apache Trinidad HTML components
Hi !!!
I'm using Apache Trinidad HTML components. In that components after using Table Layout I'm trying to use Row layout after dragging the row layout to the design view the following message is appearing in the design view, the same is happening in the browser window also.
style="position:absolute;width:auto;height:auto;top:0px;left:0px;bottom:0px;right:0px"
Thanks in Advance
Anil Kumar GollaRic,
First I created an application by selecting New Application from the Application Navigator. In that application window I submitted relevant names for creating the new application, after that it displayed the project window in that I given the project name then in Jdeveloper's Application window the project name is displayed from there I selected new by right clicking, in that New gallery window, I selected Web Tier > Page Template > Ok. In the Create Jsf Page template window I created a File Name and Facet Definitions namely North, West, East, South and Center. After that Jdeveloper created the new JSPX page. In that page first I dragged panel stretch layout from Adf Faces to the Jdeveloper's design view and given facet references (North, West, East, South and Center). In the North Portion I dragged the Apache Trinidad HTML's Table Layout component, after that Row layout, then in the design window I'm getting the "style="position:absolute;width:auto;height:auto;top:0px;left:0px;bottom:0px;right:0px". The same is displaying in the browser window also.
Thanks in Advance
Anil Golla
Maybe you are looking for
-
Composite Application deployment problem
I have created a composite SOA application and trying to deploy it on WLS. I have created a connection to the Application Server MyAppServerConnection. I right click the project name and point to Deploy, it gives the webservice name "validationForCC"
-
My list of playlists is getting long, and I foresee a problem when scrolling through them becomes a hassle. Is there any way to create subdirectories or nested playlists? E.g., several directories for types of music, and under each of those several d
-
Updated to Mavericks - Now dropping WiFi connections like crazy
The title says it all. On an early 2013 MacBook Pro retina. Running perfect until the day I upgraded to Mavericks. Now my WiFi drops anywhere from once an hour to every 5 minutes, and also has trouble reconnecting after waking up from sleep. I've tri
-
Usage of different types of currency units
Hi All, Can any body let me know the scenarios to use different types of currencies i.e. 0doc_curry(document currency), 0currency e.t.c ? Thanks and Regards, Prashant
-
Is there any BAPI,direct input object in lsmw to create billing plan?
Hi experts, Is there any BAPI,direct input object or idoc in LSMW to create sales order with billing plan? Lance