Layout to file
hi
i am using sap script to genrate a form- i want to know if there is a way to export sap script into a file?????
thanks
Hi Ami,
Use standard program RSTXSCRP with below parameters:
1. Check Form Radiobutton
2. Objectname give Layout name
3. Mode give EXPORT
4. check From/on frontend
5. Filename give, path of the file to be downloaded.
Hope this is helful.
Regards
Sravan
Similar Messages
-
Layout Par file name not appearing in list while creating new Layout
Hi
I downloaded com.sap.portal.layouts to modify the light_framework page to suit my needs, renamed it to com.mycomp.portal.layouts, modified the page, created a par file and uploaded it thru NWDS.
When I go to the portal to create a new Layout, I do not see my custom par file in the list.
I have even uploaded it from the portal: System Administration -> Support -> Support Desk -> Portal Runtime -> Administration Console -> Archive Uploader. Even after it was successful, I was not able to see the par file listed while creating a new Layout.
How do I get my Layout par file listed do i can create my Layout?
Thanks
JHi Bala
I never had a problem with the JAR files in this par file while opening, nor did I have to manually add anything.
I know it has been successfully uploaded in the portal, as I can see my par file in the Archive Deployment Checker.
What could be wrong? Is there something else I have to put in the portalapp.xml to make it visible in the list?
Thanks
J -
Layout and file description doesnot match
In Profit center planning,
When I am press the overview button after entering the account numbers , version and all other details in the selection criteria,
Then I get this error
Layout and file description doesnot match. I went back and I deleted the file name in the file column and I am getting the same error.
Thanks,
YGBHi GB,
For Planning Data Upload if Excel Integrated Planning is activated, system will generate the File Description. and system will take you to Excel where in you will save the Generic File name. (at the time of config).
Suppose if you have saved that Generic File to be "Planning1", the file name should be maintained in the same format when you upload the Planning Data. You can maintain your File Name to be Planning2 Planning3 etc (in text format).
Srikanth Munnaluri -
Hello
In the layout starter files, why does the first line of text
in the 'Main Content', not line up with the first line of text in
the 'Left Side Bar'? Can someone please tell me why, & if there
is a way to fix this?
I'm using 2 column fixed, left side bar, header & footer,
previewing in IE7.
ThanksIt's because of the padding on the sidebar div which is
pushing contents
therein down by 30px. THis is enforced by the use of IE
Conditional
comments in the head of the page -
<!--[if IE]>
<style type="text/css">
/* place css fixes for all versions of IE in this conditional
comment */
.twoColFixLtHdr #sidebar1 { padding-top: 30px; }
.twoColFixLtHdr #mainContent { zoom: 1; }
/* the above proprietary zoom property gives IE the hasLayout
it needs to
avoid several bugs */
</style>
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jrn007" <[email protected]> wrote in
message
news:f0rqcm$qn3$[email protected]..
> Hello
>
> I can't work out why the first line of text in the 'Main
Content' doesn't
> line
> up with the first line of text in 'Left Side Bar'? Can
someone please tell
> me
> why, & if there is a way to fix this?
>
> I'm using 2 column fixed, left side bar, header &
footer, previewing in
> IE7.
>
> Thanks
> -
I have created fixed layout epub file, its display vary on indian iPad and German iPad
Hi All,
I have created a fixed layout epub file. I've viewed this in Indian iPad it disply seems good, but the same epub file i've viewed by German iPad its display vary. I dont know why this displays vary on iPad. This is iPad problem or iPad settings vary on different countries.
Please find below the iPad screen shots.
Indian iPad
German iPad
Kindly advise if anyone faced this issue.
Thanks in advance.
Thnaks & Regards,
U.Arikrishnan.Hi Tom,
Please find below the images taken from the two different ipad,
Indian iPad
German iPad
I've faced this kind of issues in multiple books. I know there is no differnce in manufacturing but why this happened?
Regards,
U.Arikrishnan. -
Where's the keyboard layout preference file?
I'm having an irritating problem with my preferred keyboard layout (Canadian) mysteriously reverting to other layouts, even though I have disabled all but the Canadian layout. It's only happening in one of my user accounts. So I'm looking for the keyboard layout .plist file to trash, but I can't find it. Can anybody help me locate it?
ThanksHello,
Check out this link: http://docs.info.apple.com/article.html?artnum=75066
When you originally set up your eMac, you would have used the SetUp Assistant... there's information at the link above that might help.
I've searched high and low for a preference file that might be related. You could trash your com.apple.systempreferences.plist but you would have to reset your System Preferences system wide. If you want to try that go to the user account in question. Go here: /Library/Preferences. Locate the com.apple.systempreferences.plist file and drag it to the Desktop. Open System Preferences and reset the keyboard (Canadian) and see if that helps. If that resolves the problem, then that com.apple.systempreferences.plist file should go to the Trash. The next time you open System Preferences your eMac will create a new pref file for you.
Carolyn -
Problem with file layout in File Reciever
Hi,
I am working with Idoc to File Scenario. I am getting a different layout when i am opening a file in notepad and wordpad.
wordpad format:
1 000000171620 SN N F F
3 PS7815003 1.000
4
1 000000171720 SN N F F
3 PS7815003 1.000
4
1 000000171920 SN N F F
3 PS7815003 1.000
4
But in notepad i am not able to see the value as above, instead i see the the values of different lines continous one after the other in a single line with some seperator as "|||"
Can you please advise on this.
Regards,
ManojHi Manoj,
check this
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter -
How to handle the layout of file in OWB?
Hi all,
I am facing one problem..that is
If my file is coming monthly
i need to load into datamart.
But the problem is the layout is not same.
At the end of the file one field may add or one field may delete..
The procedure I am following to load data into datamart is "First I am creating External table and then from Eaternal table to Table."
How can I handle this type of file in OWB
Pls give me some inputs
Thanks in advance
Srinivashi,
Define the extenal table in the followin way,
CREATE TABLE sample_extbl
2 ( col1 NUMBER
3 , col2 NUMBER
4 , col3 NUMBER
5 )
6 ORGANIZATION EXTERNAL
7 (
8 TYPE ORACLE_LOADER
9 DEFAULT DIRECTORY LOG_DIR
10 ACCESS PARAMETERS
11 (
12 RECORDS DELIMITED BY NEWLINE
13 nobadfile
14 nologfile
15 FIELDS TERMINATED BY ',' LDRTRIM
16 MISSING FIELD VALUES ARE NULL
17 )
18 LOCATION (LOG_DIR:'a.csv')
19 )
20 REJECT LIMIT UNLIMITED;
case 1:
Now, for example if the file a.csv contains the data as follows.
col1,col2,col3,col4,col5
abc,28,xyz,mno,1000
abc2,38,xyz,mno,2000
abc3,28,xyz,mno,3000
Then, if we query the external table "sample_extbl"
select * from sample_extbl
Then you get the data as follows
col1 col2 col3
abc 28 xyz
abc2 38 xyz
abc3 28 xyz
Case 2:
Now, for example if the file a.csv contains the data as follows.
col1,col2,col3,col4,col5
abc,28,xyz,mno,1000
abc2,38
abc3,28,xyz,mno
Then, if we query the external table "sample_extbl"
select * from sample_extbl
Then you get the data as follows
col1 col2 col3
abc 28 xyz
abc2 38
abc3 28 xyz
Regards,
Gowtham Sen. -
View temporary data in Web layout during file upload in Integrated Planning
Hi Experts,
When using File Upload funcationality, in Integrated Planning,
I have a requirment, How user can view the data in the web layout?
After data display user can make changes in the data and on click of Save the updated data is saved in cube.
If any one has come across this requirment can you please help me out how things can be carried out?
If "how to implement" document is present can you please provide me the link.
Thanks and Regards,
AbhiHi Abhi,
I assume, you are using WAD for this..
Please do the following: (Please note the the cube has to be in Plan mode while executing WAD)
1. Create a input enable query (through query designer) on th eaggregate level (the one you are using for IP). You might need to create filers for the aggregate level. these filters can also be used in the query.
2. In the WAD, pull this query.
3. Create a button in WAD and check for the planning functionalities readily available that you can use in WAD. One of the planning functionality is SAVE Data. This will save any data which is entered by the user.
4. In the same button integrate a Refresh Data command after the SAVE data. This will automatically refresh the query and pull the updated/changed data from the cube.
This should work. Please write back in case of any clarification.
Regards, Rishi -
Chinese support of "Export a Response to Form layout PDF File"
One quick question about the form exporting function.
Although Chinese is not officially supported in FormsCentral yet, the display is correct most of the time (layout, view response, export xls).
Yet we need to confirm one more thing which is crucial to our company, how is the chinese support in the function "Export a response to PDF in a form layout"?
Here's some situations of Chinese support I tried so far:
Export responses to xls file -----OK
Print the Detail View of a Response -----OK
Export the Detail View of a Response to a PDF File -----Chinese character turns into "...."
Export a Response to a PDF File That Matches the Form Design -----Not known, need your helpYou can export responses as excel file. Open the responses tab, choose File -> Export Responses and select Excel file format to export to.
Thanks,
Wenlan -
Editing InCopy stories in InDesign layout- InCopy file gets huge
Lately, I am experiencing file size issue. When I go into my layout to check out an InCopy story; check it back in after I do my edits- the file size suddenly gets much larger. It would start of 160k and then becomes 2MB file. Could this be an update issue or am i using "x" amount of conditional text? My editor uses InCopy on a PC and I use a mac.
thanks!Hello, I did try your suggestion and the InCopy file still got larger. I even re-created the layout into a new document. It started out to be okay but I still got the same issue when i check in/out the incopy story.
It is puzzling because I have another layout with about the same amount of layers/conditional text, images and i have no problems so far with that InCopy file getting large. -
Location of print layout design file
Hi Friends,
i created two design using printlay out designer. now how can i implement it to customer system. where is sdk keeping the file system
RegardsHi Muna,
If you only want to copy the layouts then you can use the CopyExpress addon to export the layouts to an XML file which you can take to your client and reimport (again using CopyExpress).
For reference, all PLD layouts are stored in the RDOC and RITM tables.
Kind Regards,
Owen
P.S. Please note, SAP used to allow the export and import of reports using SQL statements (there was even a SAP note on how to do it). However, this method is no longer supported so the only certified way to copy your layouts is to use CopyExpress (or to use the DI API ReportLayoutsService object as suggested by David). -
AutoCAD to PDF Conversion Appends Layout to File Name
Having found no answer to my question in the CAD forums, I submit the following for your consideration. I recently upgraded from AutoCAD 2005 to 2008. Using 2005 I was able to convert my .dwg files to .pdf and retain the same basic file name as the CAD drawing. Using 2008 the file name is now appended with "Model (1)", so if I start with "Drawing 1.dwg", I end up with "Drawing 1 Model (1).pdf". I currently have both versions of AutoCAD on my PC (Window XP Pro) and they will produce two different results when converting the same file. I am using Acrobat 3D 8.1.0. This same problem plagued me for years in previous versions of CAD and I thought it had finally been resolved. Also, when I first began using AutoCAD 2005, I was still using Acrobat 6 Pro, again there were no problems with the file name, nothing was appended. I did not add any scripts or VBA routines to AutoCAD 2005, it simply worked fine. Does anyone know if there is a preference/switch either in AutoCAD or Acrobat to fix this problem? In previous years I had to edit each conversion by hand until AutoCAD 2005 "fixed" the problem, I'd rather not have to do that again. Any help would be appreciated, thanks.
Hi there,
I believe I may have found the solution!
You will need to set your CrystalReportViewer.ID property to what you need your filename to be.
In my example:
CrystalReportViewer.ID = "NewPDFFileNamehere";
The .PDF file extension will be added automatically!
Just note, you need to set the above property ASAP in code - meaning - It should be the first thing you do before having any other code attached, read into or from CrystalReportViewer.
Hope it helps!
Credits to http://blog.dragonsoft.us/2009/04/07/how-to-set-default-file-name-for-export-from-crystalreportviewer-in-aspnet/
RBotha -
Setting background-image as editable in Fluid Grid Layout (Template file)
Hi, Im very basic on Dreamweaver so bare with me,
I am creating my first website and setting up my template file.
I am struggling with making my background image editable in the template file,
Alot of the awnsers point me into creating a new background style sheet which I have done.
I have included :
<link rel="stylesheet" href="../Background style sheet.css" type="text/css">
into my <head> in the source code and now im pretty lost for what to do next... I want to link it to all my mobile, tablet and desktop #main divs and then be able to edit the background image for my different web pages;
for example my home page is one background-image and then the other web pages all have other background images.
Sorry if I am not asking the right questions, I am very new to coding
Regards,
Confused Graphic Design student.It's actually very easy to target the <body> of each page in an external stylesheet to change the background individually, just not with DW Templates.
Normally, what I would do is give each page's <body> tag an id, for example, on an about.html page...
<body id="about">
Then in the css, you would give the #about id a background-image setting...
#about {
background-image:url(about_bg.jpg);
Each page would have a similarly named id in the <body> and a corresponding #id in the css.
Side Note: Stick to lower case, alpha numeric file names for all of your pages and images. Use underscores or hyphens instead of spaces for them too. Servers are CaSe SenSitIvE and a link to Index.html (capital i) will not go to a page named index.html (lowercase i). It will work on your local system, just not on the server because the server sees the case structure difference as two separate files. -
Adding a new layout for DME for file download
Hi All,
How do i add a new layout for file download in DME?
Thanks
William WilstrothThis problem is solved.
Need to enhanced the T042O table.
Maybe you are looking for
-
How do I get my iPod classic 160GB to sync with the new iTunes 11.4 (64-bit)
None of the solutions I tried have worked: I reinstalled iTunes. I reauthorized my computer I restored my iPod Each time I sync, it says that sync is complete, but no songs are on my iPod. Since restoring my iPod, I get this error mess
-
EHP5 Stack File is invalid: component 'EA-HR' (stack release 600 source .
Hi all . . . Attempting to install EHP5 on ERP ABAP stack. Currently on EHP4 SPS5. During the configuration roadmap step, the Stack configuration overview told me that "for the following components, a Component Upgrade/Installation and/or Support Pac
-
Anyone with 27" iMac and 24" Apple 24" LED to compare brightness?
I am running them in a dual monitor set up. I notice the new 27" screen not as bright as the 24". Anyone else? Is this the same as yours in comparison, just wanted to make sure there is not a problem with the new 27". I have both at their respective
-
Created purchase order based in drafts
I need help, I want to create purchase order based in drafts. Has somebody any sample in SDK?? Thanks.
-
INVOICE PRINTING IN DIFFERENT LANGUAGE
Hello friends, We have offices in different countries so every countries generate there invoices in their language. Now how to print the invoices depending upon the logon language? should i create invoices in smart forms or sapscript which one is bet