Layout tree disappeared in RSA1

How can I reset layout in RSA1 so I can see infoproviders/transformation/datasource/source system below infoareas Some how all disappeared.
Thanks
Message was edited by:
        shailendra jain

Hi Shailendra,
Could you tell me what did you do? I'm having the same problem.
Thanks.

Similar Messages

  • Why did an Infosource disappear in RSA1?

    Hello experts,
       We have an info source that disappear in RSA1, but if we find it in the monitor of infocube, we can see it. What can it have happened with this info infosource to disappear from the tree of RSA1?
    Thanks,
    David

    Hello Rakesh,
       I appreciate your suggestion and I will do it. But, before this action, I wanna know if the option "insert lost nodes" can affect other current nodes. I want to be safe to insert lost nodes.
    Thank you Rakesh,
    I hope your reply,
    David

  • SAP MMC tree disappear

    Hii
    my quality server SAPMMC tree suddenly disappear. and still my quality server is down ?
    pls help .

    Hi,
    This is SAP business one system admin forum. Please find correct forum and repost above discussion to get quick assistance.
    Please close this thread here with helpful answer.
    Thanks & Regards,
    Nagarajan

  • Inline object in portrait-layout text disappears when switched to anchored?

    I'm trying to add a simple drop-cap to a text-only book that I'm putting together in iBooks Author.  In Landscape orientation, it works fine; I add a text box, position it at the beginning of the chapter text, set it to Anchored placement, and turn on Object causes wrap.
    In portrait orientation, however, "anchor" isn't working.  Specifically, if I create an object, copy-paste it into the pageless body text (so it's inline), and then switch it to Anchored placement (via either the Inspector or the toolbar), the object vanishes.  Completely--it's gone from the document entirely so far as I can tell.  I tried it with a text box and various shapes, and also tried creating a new document with a different template--the behavior was the same in every case.  The object just disappears.
    Now, that just can't be the intended behavior, but is this a reproduceable bug for other people?  And/or is there a workaround so I can get a drop-cap in portrait view?

    Hi Eric,
    I believe the problem is because the leading on the image paragraph is now set to 14pt, whereas previously it was probably set to auto. Auto leading is the only way to get images to push the text down like you want. Note also that for some reason, ID has a preference "Apply leading to whole paragraphs" turned off by default. Unless you select the whole paragraph, auto-leading will not work the way you want it to until you have this preference switched on.
    Regards,
    Malcolm

  • Gnome3 keyboard layout icon disappeared [SOLVED]

    Hello guys.
    I'm using Gnome3 and have no idea how to edit applets in the panel of gnome-shell.
    The problem is that I don't have keyboard layout icon in panel(With or without useFlags option set in gconf-editor). How can i fix it?
    And BTW does anyone have problem with switching layout with caps lock key? It just doesn't switch layout.
    Sorry for my English.
    Thanks in advance.
    Last edited by thoice (2011-05-25 19:57:43)

    Wey wrote:
    Did you check the session logs? Did you verify that the applet in fact isn't present (and not just lacks an icon)?
    edit: for the capslock-issue, go to the region panel in gnome-control-center, switch to the layout-tab and click options. There should be a list with the appropriate preferences. It defaults to shift+capslock by the way, which works fine here.
    If session logs is in .xsession-errors, then I have this file ending with
    [1305307574,000,xklavier.c:xkl_engine_start_listen/] The backend does not re
    quire manual layout management - but it is provided by the application
    [1305307574,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page fo
    r group 0 is not ready
    [1305307574,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page fo
    r group 0 is not ready
    [1305310904,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] JS ERROR: !!! Exception in callback for signal: message-icon-added
    JS ERROR: !!! message = 'source is null'
    JS ERROR: !!! lineNumber = '417'
    JS ERROR: !!! fileName = '/usr/share/gnome-shell/js/ui/notificationDaemon.js'
    JS ERROR: !!! stack = '([object Object],[object _private_Shell_TrayIcon])@/usr/share/gnome-shell/js/ui/notificationDaemon.js:417
    ([object Object],[object _private_Shell_TrayIcon])@/usr/share/gjs-1.0/lang.js:110
    _emit("message-icon-added",[object _private_Shell_TrayIcon])@/usr/share/gjs-1.0/signals.js:124
    ([object _private_Shell_TrayManager],[object _private_Shell_TrayIcon])@/usr/share/gnome-shell/js/ui/statusIconDispatcher.js:53
    ([object _private_Shell_TrayManager],[object _private_Shell_TrayIcon])@/usr/share/gjs-1.0/lang.js:110
    PS Caps issue is fixed now. Thanks. Caps Lock itself was disabled in Caps Lock key behaviour branch in Options in keyboard layout panel.
    Last edited by thoice (2011-05-13 18:33:42)

  • Word 2011 - Tables Layout button disappeared!

    Hi.
    Normally when I click on the "Tables" a button in the Ribbon it extends horizontally and allows a new " Tables Layout" button to its right side. This is now not appearing at all. I am highlighting a Word Table nothing nada. Just that up/down "to hide or not hide" motion is going on with the Ribbon panel below.
    Why is this happening and how can I can get the "Tables Layout" button back again? Please reply soon. Thank you.

    If anyone does have any suggestions I would really like a hear them. Thanks.

  • Fluid grid layout tools disappear

    After I create a new page and ad fluid divs the tools such as re-size, copy div and position disappear. Does anyone know how to make them show up again? I am using Dreamweaver CC. In design view the tools are replaced by a solid blue outline containing box.

    Did you save & name your document yet?
    In Split View, are all new divs inside <div class="gridContainer clearfix"> ?
    Nancy O.

  • Aperture doesn't save book layout, book disappears

    I start to create a book in Aperture. Then I quit Aperture. When I relaunch Aperture, the book no longer appears in the project. However, if I explore the database using "show package contents," I can see a file with the book's name. Why won't Aperture save my book layout? Why does the file appear to exist, yet the book doesn't appear in the project? Can I recover the in-progress layout?

    Yep, that did it! Rebuilt the library as instructed, and the book layout reappeared in the project. Many thanks for the simple and effective solution!

  • SAPMMC tree disappear

    Dear Expert,
    My SAPMMC suddenly disappeared after restarting the server, i have tried to recover it by:
    - adding snap-in, but it showed error when activating:
    CAN NOT CONNECT TO SAP SERVICE on PORTAL01
    WebService errror: 20
    Unknown error
    DCOM Interface error: 80070424
    The specified service does not exist as an installed service.
    - try to run startsap manually from command line (did not work), with command:
    startsap.exe name=SLM nr=00 SAPDIAHOST=<host name> profile=d:/usr/sap/SLM/SYS/profile/START_DVEBMGS00_hostname
    My questions:
    1. How to recover SAPMMC without re-installing CI?
    2. Proper command to startsap manually from command line.
    3. What's the root cause for such problem? How to avoid this in the future?
    Since this is solman system that urgently required, your assistance and advice are greatly appreciated.
    Thanks in advance,
    Rudi

    Dear Debasis,
    Greetings!
    I am facing a similar situation.
    I had an EP 6 system installed only with the JAVA instance on Windows 2003 server with MS SQL. I had the installation and configuration successful.
    I wanted to install SAPGUI in the server for accessing my R3 systems. After installing the SAPGUI, I had to restart the portal server. After this I am not able to find the SAP instance of the Portal system in the SAPMMC.
    I tried all the suggestions mentioned by you in the above forum helping Rudi.
    1. Starting the SAPSERVICES - SAP<SID>_00 & SAP<SID>_01
    2. Changing the logon of the services after changing the logon userID from SAPService<SID> to <SID>ADM
    3. Checking the Path to Executable for both the services.
    4. Checking the share sapmnt and saploc and the access permissions for the same.
    5. Starting the SAP System from the command line.
    6. Starting the sapstartsrv.exe from the SAP Executables.
    In the last try I got an error message mentioning that the DYNAMIC LINK LIBRARY LIBRFC32U.DLL COULD NOT BE LOADED.
    When I searched for the dll file in the server, I found the same in the SAPGUI Installation CD Dump and no-where else.
    Could the Installation of SAPGUI 7.10 in the server cause any user permission problems or file permission changes? I remember a message that appeared when I was installing the SAPGUI, it is mentioned below,
    +Please switch your Terminal Server to install mode before running SAPsetup. You can do this using the commandline "change user /install" and reset to execute mode using "change user /execute" after installation.
    Do you want to correct your server mode now?+
    Please advice on the same. Could this cause any changes to the library file and pull down my server when it was restarted?
    What should I do now to get back the instance in the SAPMMC.
    Expecting your reply at the earliest.
    Thank you
    Regards,
    Vineeth

  • HT203167 I bought a game called Hay Day . I bought a Christmas tree for my play farm which cost me nearly 27.00 pounds worth of Diamonds I purchased . My tree has disappeared!  So , I want it back!  What do you suggest I do .

    I bought a game called Hay Day from Apple application store yesterday . It's about a farm. You build it up by buying Diamonds to pay for the items you need . I bought 27 pounds worth of diamonds towards purchasing a Christmas Tree . While I was trying to move it so I could place it in the location I preferred , the tree disappeared, and I am unable to locate it . I am extremely upset . I don't know how I can insert an image if I haven't got it , so I suggest Apple viewed all my purchases and come up with a reasonable explanation and help me retrieve my Christmas Tree . Don't you think it's reason enough to make you feel really , really upset .

    I bought a game called Hay Day from Apple application store yesterday . It's about a farm. You build it up by buying Diamonds to pay for the items you need . I bought 27 pounds worth of diamonds towards purchasing a Christmas Tree . While I was trying to move it so I could place it in the location I preferred , the tree disappeared, and I am unable to locate it . I am extremely upset . I don't know how I can insert an image if I haven't got it , so I suggest Apple viewed all my purchases and come up with a reasonable explanation and help me retrieve my Christmas Tree . Don't you think it's reason enough to make you feel really , really upset .

  • Error opening communication channel tree

    Hi,
    i'm trying to open the comm channel tree in PI 7.1. When i click on the icon left to expand the tree i'm getting the error message
    while trying to invoke the method com.sap.aii.ib.bom.gen.XiReference.getTypeId() of an object loaded from local variable 'xiReference'
    Clicking on ok to acknowledge the error message the icon for the comm channels tree disappears.
    I was not able to find an oss note for that. Does anybody has some information on how to solve that?
    //Rainer

    Thx for the quick reply. Strange that i was looking exactly for the error message mentionend in the note but it wasnt popping up...
    As i need Basis team to implement the patch and this issue is blocking our development, is there a quick (maybe dirty) workaround?

  • Master-detail page with form layout -- insert only -- not in create mode

    JDeveloper 10.1.3.1 with JHeadstart
    I have the following master-detail structure in JHeadstart:
    Group 1, Table a, Layout: table-form
    Group 2, Table b, Layout: table-form
    Group 3, Table c, Layout: form
    Group 4, Table d, Layout: form (on same page as master table c)
    Table a, b and c are updatable (insert, update and delete).
    I have problems with the last page, tables c and d, master-datail both in form layout.
    The master-table (c) is not an insert-only table, the detail table needs to be an insert-only form on the same page as the master table c.
    Settings Table d:
    Advanced search and quick search: none
    Autoquery: disabled
    Single row insert allowed (other options in Operations disabled)
    In my view object I have used the settings in the JDeveloper guide 8.1.2 ('no rows...' in tab Tuning).
    I run my application in JDeveloper (with the option run in my ViewController-project, which means that I am not running my detail page directly in JDeveloper??) and when I open this last page, the detail form is not in create mode (I see no rows found and a create rows button).
    I have read several threads in this forum, but I do not know how to solve this problem.

    This does not work.
    In my first post I made an mistake in describing my application, it is not a table-form, but a tree-form application:
    Group 1, Table a, Layout: tree-form
    Group 2, Table b, Layout: tree-form
    Group 3, Table c, Layout: tree-form
    Group 4, Table d, Layout: form (on same page as master table c)
    If I override the executeQueryForCollection method in the ViewObjectImpl of table d I get a message ('JBO-27122: SQL-fout tijdens voorbereiding van statement' and 'java.sql.SQLException: OALL8 is in an inconsistent state').
    while clicking on the tree (with table b and c). It seems that the QueryForCollection method is being executed to early.

  • ADF Tree 11g column 100% to fit the avilable space in af:panelCollection

    Hi All,
    I want to stretch the tree column to fit all the available space in af:panelCollection. I ve changed its InlineStyle to width:100% but its is suggesting to use StyleClass to AFStretchWidth. I tried both the options but didn't achieve desired output.
    Any hint or suggestion will be highly appreciated.
    Thanks in advance.
    Best Regards
    Bilal
    Edited by: Bilal on Oct 3, 2011 7:41 PM

    Hi All,
    I have tried various options but in vain.
    A clarification is that I have a page having ADF query panel with tree table. I don't want to show the other columns in the result. Just tree is enough to display the contents.
    I want to maximize the tree column to fit into the available space of af:panelCollection.
    Option 1. I set the styleClass to AFStretchWidth for af:column of the ADF tree. It didn't work.
    Option 2. I encapsulated af:column of the tree into the f:center facet of af:panelStretchLayout and set af:panelStretchLayout styleClass to AFStretchWidth. The af:column of the tree disappeared. No output.
    Option 3. I encapsulated af:treeTable into the f:center facet of af:panelStretchLayout. It is giving error that af:panelStretchLayout is not a valid child of af:panelCollection, so it also didn't work.
    Option 4. I encapsulated af:panelCollection into the f:center facet of af:panelStretchLayout. It also didn't work.
    Any thing I am missing ... Any other option to try out.
    Any help will be highly appreciated.
    Thanks ... Best Regards
    Bilal
    Edited by: Bilal on Oct 4, 2011 5:06 AM

  • Javascript error for detailed navigation tree : 't' is undefined

    Hi everybody,
    I have a problem on my anonymous role. When i click on the link page of a km navigation IView in the detailed navigation tree, the IView open itself but the navigation tree disappear and i have a Javascript error :
    Error :  't' is undefined.
    Code :  0
    URL :  http://localhost:50000/irj/portal/anonymous?standAlone=true&buildTree=false&NavPathUpdate=false
    Could somebody help me please ?

    Sorry but it's the same result.
    Anybody else?
    Somebody could say me if i modify the parameter of the URL somewhere?
    http://portal:50000/irj/portal/anonymous?standAlone=true&buildTree=false&NavPathUpdate=false&windowId=WID1182328037651
    I talk about the parameter buildTree or NavPathUpdate.
    These parameters are added when ai click on the link of the tree.

  • Layout and moving forward backward

    hello,
    i'm beginner in report and i try to modify a complex report
    i would like to move in the layout editor, a field that i have created
    to put it in the good place in layout tree
    but in the menu layout, "move backward" doesn't work and when i use
    "send to back" it becomes impossible to select my new field, to move it,
    and it's at the top of the tree!!!
    how to move field in layouts????
    @rosagio
    i use REPORT 9i(9.0.2)

    I don't know what you mean by "move backward", but it looks to me like you just want to move your field to another position.
    You cannot always do that. Within the current frame it is not a point, but trying to move it outside the current frame could become an issue.
    There are two buttons in the layout editor that control how you can move fields: confine mode and flex mode. There are good explanations in the online help.
    But you have to be really careful if you switch off confine mode: you can easily move an object out of the correct group frame.

Maybe you are looking for