Layouts in OBPM10GR3 not created in Enterprise

Hi all,
I created some layouts in studio for my project and then deployed the project via. the Process Admin to the Enterprise Server which is on Weblogic.
Everything was successful , but my layouts were not seen in the workspace. I had to recreate them in my workspace for all participants.
Why is that so?
How do I eliminate creating layouts again in the workspace in my Enterprise Server when I already have them in my studio?

Hi Balaji,
Look at this SAPMMC-error: Snap-in failed to initialize
Hope it help!
Juan
Please reward points if helpful

Similar Messages

I create an enterprise project template in Project Professional but when I go to create a project in PWA the formattting does not carry through to the project

Hi
Project Server 2010
I created an enterprise template in Project Professional and formatted it and set the font to Gill Sans MT, I then pointed the Project type to this project template.
When I created the new project type in PWA the formatting and font did not carry through to the new project.
Has anyone seen this behaviour before?
Kind regards
M

Do you find that if you create a project in project professional using a template and then save it the formatting is shown OK? So you only see this problem when you are creating the project from PWA and the plan template is picked up via the Enterprise Project
Type?

Tables created using Enterprise Console Manager do not show up in SQLPLUS

I am struggling with Enterprise console manager and command line SQLPLUS.
I have tried scott/tiger , system/manager and the new user that I have created. But I am having the following problems:
1. I cannot connect as NORMAL through Enterprise Console Manager if I use scott/tiger OR new/paswd. Only way I can connect as NORMAL is using system/manager
2. The tables that I create using Enterprise Console Manager (while connected as system/manager in NORMAL mode) do not show up in the command line SQLPLUS. I am check this by running the following command:
SELECT OWNER, OBJECT_NAME FROM ALL_OBJECTS WHERE OBJECT_NAME LIKE '%TEST%';
While running the above command I am conected to SQLPLUS using system/manager WITHOUT SYSDBA
3. Lastly, I have a JAVA class which establishes as connection to the database using system/manager. But I can access only the tables that I create using the Enterprise Console Manager. If I create a table using command line SQLPLUS (while connected as system/manager), I cannot access it through Java program.
I am struggling with this since last morning and now I have run out ways to debug what is happening. Can anybody suggest any ways to tackle this?
Thanks in advance,
Mahesh

Prior to 11g, when you created a table or whatever, you automatically allocated one extent.
This is now no longer true and depends on a parameter I don't remember.
dba_segments is a summary of dba_extents.
Obviously, if there is no extent allocated, the table (view is defined with inner join) will not show up.
You could qualify this is as a bug and submit a SR to Oracle. But then the performance impact may be huge.
Sybrand Bakker
Senior Oracle DBA

Can not create or check out Enterprise Calendars

Hi folks,
MS Project Professional 2013 does not display the enterprise calendar(s)
that I want to edited/ created after I select the Enterprise Calendar choice from PWA > Server Settings in Project On-line. This behaviour is isolated to my client's users.
They are using IE ver.8.
I on the other hand have no issue. I am using IE ver.11.
Note, none of has have any problem checking-out resources in MS Project Professional from the enterprise resource pool, PWA and MS Project Pro seem to be communicating at that level.
Any ideas?
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

Check also the account URL in MS Project Pro. It should typically be
https://servername/PWA without the default.aspx. Finally ensure that the users have the correct permissions for editing calendars.
Finnaly try to start the IE with administration rights.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

MMC could not create the snap-in Server 2008 Enterprise

I have the following error in my Windows Server 2008
MMC could not create the snap-in. The snap-in might not have been installed correctly.
name: Server Manager
CLSID: FX:{18ea3f92-d6aa-41d9-a205-2023400c8fbb}
I have not been able to find a server that has the same files as listed in other references but none of those other servers have the
same issue:
"On
another Windows Server 2008 x64 or Windows Vista x64 computer, in
thec:\windows\servicing\packages folder, 6 KB948609
related files may exist. Please copy all of them from that computer to c:\windows\servicing\packages on
the problematic computer."
So any assistance would be great.
"If at first you don't succeed, get a bigger hammer."

I take that back... I can cut and paste:
Here is the error from the MMC:
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck)
   at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache)
   at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
   at System.Activator.CreateInstance(Type type, Boolean nonPublic)
   at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
   at System.Activator.CreateInstance(String assemblyName, String typeName, Boolean ignoreCase, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes, Evidence securityInfo, StackCrawlMark&
stackMark)
   at System.Activator.CreateInstance(String assemblyName, String typeName)
   at System.AppDomain.CreateInstanceAndUnwrap(String assemblyName, String typeName)
   at Microsoft.ManagementConsole.Internal.SnapInClient.CreateSnapIn(String assemblyName, String typeName)
   at Microsoft.ManagementConsole.Internal.ClassLibraryServices.Microsoft.ManagementConsole.Internal.IClassLibraryServices.CreateSnapIn(String assemblyName, String typeName)
   at Microsoft.ManagementConsole.Executive.SnapInInitializationOperation.OnStart()
   at Microsoft.ManagementConsole.Executive.RunningOperationsTable.EnqueueOperation(Operation operation)
   at Microsoft.ManagementConsole.Executive.StandAloneComponentData..ctor(SnapInRegistrationInfo info, Int32 bookkeepingId)
   at Microsoft.ManagementConsole.Advanced.FrameworkSnapInFactory.Microsoft.ManagementConsole.Advanced.ISnapInFactory.CreateSnapIn(Int32 bookkeepingId, String snapInKey, Object& snapIn)
"If at first you don't succeed, get a bigger hammer."

Creating new Enterprise wiki site collection or creating a new subsite, or creating a new library

I have SharePoint 2013 web application, which has enterprise wiki site collection for our finance department. Now I need to create a new site for our HR department.
The two sites will differ in the following:-
Each department have different permission. For example each department have different users for who can approve, edit/create.
Each department will use different EnterpriseWiki page layout. As each department will have different wiki category columns (different site columns).
Also each department will use different metadata navigation.
The two sites will have the following in common:-
The same master page. Seatle.html.
So I can not determine which approach I should follow:-
To create a new enterprise wiki site collection for our HR department.
Create a new enterprise wiki library inside the current site collection representing the HR enterprise wiki.
To create a new subsite ?
Can anyone advice on these please? Thanks

Given that each will have different permissions I would go with a separate site collection. That will provide the best security basis. You could do it with a sub site, but it will be easier to maintain the security as a separate site
collection.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.
Yes i know that having different permission & different page layouts will push toward creating separate site collections. but i found a major linking problem when using different site collections (i mean adding links which reference other site collections
pages), let take the following example:-
1. I have Site collection A & site collection B.
2. now inside SCA i create a new wiki page named "Test.aspx" page.
3. then inside SCA i add a link to this wiki page from another wiki page.
4. also inside SCB i also add a link to the Test.aspx page.
After that let say i modify the Test.asxp page name & title to be "NewTest.aspx" , which will affect the page URL which will be
http:.../NewTest.aspx/ instead of
http.../Test.aspx/. now inside SCA all the links to the old Test.aspx page will automatically updated to reference the NewTest.aspx so that the links will not break. but inside SCB pages, the links will not be modified and will keep referencing Test.asxp
which no more exists ... so can you advice please if there is a way to overcome this problem , and if i create sub-site representing Site collection B will this solve the problem ?

BIB-9505 Oracle OLAP did not create cursor

Hi, I am in New Presentation Wizard trying to create a new Cross tab and receive these error messages:
oracle.dss.dataSource.common.QueryRuntimeException: BIB-9509 Oracle OLAP did not create cursor.
oracle.express.ExpressServerExceptionError class: OLAPI
Server error descriptions:
INI: Error creating a definition manager, Generic at TxsOqConnection::createDefinitionManager
SEL: Unable to generate an execution plan for the query, Generic at TxsOqExecutionPlanGenerator::generate(TxsOqSourceSnapshot*)
SEL: Not Yet Implemented, Generic at TxsOqSQLPersistentExecutionPlanGenerator::generate
oracle.dss.dataSource.common.OLAPException: BIB-9509 Oracle OLAP did not create cursor.
oracle.express.ExpressServerExceptionError class: OLAPI
Server error descriptions:
INI: Error creating a definition manager, Generic at TxsOqConnection::createDefinitionManager
SEL: Unable to generate an execution plan for the query, Generic at TxsOqExecutionPlanGenerator::generate(TxsOqSourceSnapshot*)
SEL: Not Yet Implemented, Generic at TxsOqSQLPersistentExecutionPlanGenerator::generate
oracle.express.ExpressServerExceptionError class: OLAPI
Server error descriptions:
INI: Error creating a definition manager, Generic at TxsOqConnection::crea[i]Long postings are being truncated to ~1 kB at this time.

Actually I am following the example downloaded from www.iafsoft.com (http://www.iafsoft.com/downloads/index.htm presentation number 32106). The example involves only a one dimensional and one measure simple cube which resides in Analytic Workspace. It was demonstrated in one of the Oracle OpenWorld sessions in SF back in November 02. So I trust that it will work.
The environment I have is
Oracle 9.2.0.2.1 (Enterprise Edition)
JDeveloper 9.0.3
Windows 2000 (SP2)
256M memory
(all these run on the same laptop)
In this environment JDeveloper can connect to the database, can access the catalog owned by BIBCAT, can display cubes owned by BIBDEMO, can query data residing in AW through OLAP_TABLE, and can also see the dimension and measure that reside in AW from the presentation wizard. So all this convinces me that installation is ok.
Here's how the error occurs: In the presentation wizard, I select the measure from the left window and move to the right window. I then click the "Next" button to display the layout editor. Then when I click the "Next" button, the wizard won't go to the next step. If I click the "Finish" button instead, the error message will show up.
I am really stumped (for the last several days already) as to w[i]Long postings are being truncated to ~1 kB at this time.

Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal

Hello,
While exporting Export reporting from BI4 getting exception
Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
In Trace Log I am getting
com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
I tried following solution according to the all forums but still issue exist.
Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
<JVMMaxHeap>64000000</JVMMaxHeap> <JVMMinHeap>32000000</JVMMinHeap>
Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
Check for temporary read write permission on server
Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
Can you please let me know is there anything missing.

Hi,
We face the same problem with some BI4 reports.
The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
Hope it can help.
Ludovic.

Sharepoint 2010 - SPUCWorkerProcess - Could not create file

I have some type of permission issue that is preventing my User Code Host service from running (it starts then stops). I am seeing the following in my ULS:
03/01/2011 09:59:13.42 SPUCWorkerProcess.exe (0x0F78)
0x1254 SharePoint Foundation
Unified Logging Service f05l
High Could not create file C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\\IH-PORTAL002.ulstest, HRESULT=0x80070005
03/01/2011 09:59:13.42 SPUCWorkerProcess.exe (0x0F78)
0x1254 SharePoint Foundation
Unified Logging Service f05n
High No permission to write on C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\
Followed by:
03/01/2011 09:59:16.64 SPUCHostService.exe (0x13A8)
0x0D00 SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 09:59:16.77 SPUCHostService.exe (0x13A8)
0x0D00 SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
03/01/2011 09:59:16.77 SPUCHostService.exe (0x13A8)
0x0D00 SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 09:59:16.77 SPUCHostService.exe (0x13A8)
0x0D00 SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
03/01/2011 09:59:16.77 SPUCHostService.exe (0x13A8)
0x0D00 SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 09:59:16.78 SPUCHostService.exe (0x13A8)
0x0D00 SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
I have verified that the service account for the SPUCHostService is a domain account belonging to the the WSS_WPG local group (I also tried adding to the WSS_ADMIN_WPG group with no more success). The WSS_WPG
group has read and write access to the log folder mentioned above.
I started troubleshooting this when I tried to activate and use the CRM 2011 list control. And found that other sandboxed solutions also fail which lead me to look at the SharePoint 2010 User Code Host, which will not keep running.
I have a Sharepoint 2010 enterprise farm with one WFE and one seperate database server all on a single domain. The WFE is running on Windows 2008 sp2 (64 bit).
I look forward to your advice / suggestions.
PS. I have been working on this for a couple days, and have read many issues that seem to be related, but I have already checked that the Service is now set to automatic, that the service account is a member of the WSS_WPG group and should therefore
have rights to the Logs folder. It is also a member of the Local Administrators and the Performance Log Users group.
Fred Zilz

After IISReset I don't see the Logs directory issue but I still have the following:
03/01/2011 14:00:53.35 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 14:00:53.46 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
03/01/2011 14:00:53.46 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 14:00:53.46 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
03/01/2011 14:00:53.46 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 14:00:53.47 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
03/01/2011 14:00:53.47 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 14:00:53.47 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
03/01/2011 14:00:53.47 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 14:00:53.47 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
03/01/2011 14:00:53.47 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 14:00:53.49 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
Sandboxed Code Service 0000
Unexpected - Process perf counters are disabled. Sandboxed code monitoring cannot continue.
03/01/2011 14:00:53.52 SPUCHostService.exe (0x15E0)
0x14AC SharePoint Foundation
General 84yi
Unexpected An SPPerformanceCounter was not properly disposed. This could cause excessive memory use.
03/01/2011 14:00:53.52 SPUCHostService.exe (0x15E0)
0x14AC SharePoint Foundation
General 84yi
Unexpected An SPPerformanceCounter was not properly disposed. This could cause excessive memory use.
Any ideas on what is going on with the Performance Counter?
Fred Zilz

Admin Tool can not create any new database or model [nqserror 46131]

Hi everyone!
I can not create anything new in each layer on the admin tool. It marks unknown error.
When I try to import metadata it send the message: [nqserror 46131] unresolved hostname, everything in online mode. I can modify everything offline, then replace the rpd and I can create reports in Answers. But I need to do all of these online mode.
Everything else works well (Answers, Dashboards, Publisher). The server name is correctly put in the instanceconfig.xml.
OBIEE Version: 11.1.1.6.0 (upgrade recently from 11.1.1.5). The scheduler does not start since migration.
Server OS: Red hat enterprise edition
Regards,
Edgar Tercero
Edited by: 958457 on 11-sep-2012 12:04
Edited by: 958457 on 11-sep-2012 14:13

Thanks but it not solve my problem.
I detect no problem in my enviroment variables in the bi-init.sh
This is what my admin tool log says:
[OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 690] [nQSError: 43113] Message returned from OBIS. [[
[nQSError: 46131] Unresolved host name: vrnmobiee. Could not get details about the specified host]]

SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP stack only

SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP Stack
Dear Portal Gurus,
we want to integrate SAP BW Bex Queries 7.3 into an Enterprise Portal 7.3 EP ABAP Stack only installation.
1) We have Done SSO between EP And BI System
2) System Object is Created
3) When we trying to create Iview of BEX 7.3 report, its executing that report on BI server, we don't have java stack on BI System
4) We have updated the required table in Bi system for executing the report on EP
5) RFC is OK, System Object Test is OK, Report is working independently from Business Explorer, but not working from EP
There no irj services available on BI system, as it is only ABAP stack.
Can anybody help us in achieving our requirement
Thanks in advance
Michael Wecker

Hi Michael,
To integrate portal with BI you need to perform BI Portal integration steps.
Refer to a document link below for guidance purpose.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?overridelayout=t…
Ensure that you have performed all these relevant steps.
Hope this helps.
Regards,
Deepak Kori

'Could not create' and 'Fatal exception' while installing Java

Win7 64bit
latest Firefox
Java 7.10 64 and 32 bit
Hello!
Since weeks i have the following problem. Every time i want to install Java (62 or 64 bit), after the installation progress bar reached 100% and the windows closes i get 2 error messages, both containing the errors:
'Could not create Java Virtual Machine' and
'Fatal exception occured. Program will exit'
After closing both error messages i get the 'Installation successful' screen of Java again.
However, if i start firefox and go to a page requiring java (the official testing page for example), firefox freezes until i kill the process manually.
So far i reinstalled Java repeatedly, cleaning every trace of it on my system before doing so, including entrys in the microsoft uninstall wizard and the registry entrys, as described here:
+hkey_local_machine>software>microsoft>windows>currentversion>uninstall
search for "java"
delete entrys+
what is the programms problem??
edit: i cant acess java from the windows control panel either, i get the same error messages
Edited by: 981351 on 11.01.2013 07:04

I don't know that I'll be able to offer up any useful advice but here goes...
Can you enable extra verbose logging as part of the installation & post the results here or on pastebin.com?
jre-7u11-windows-i586.exe /l*vx c:\JavaInstall.log(feel free to adjust the log path to a more suitable location)
All of our users are local admins and tend to install whatever. This leads to a messy environment and we don't always know which version of Java is installed. So, to address that, I created a small script that scours 'HKLM\software\microsoft\windows\currentversion\uninstall' for Java entries, reads the uninstall string then runs the reported uninstall string. The assumption here is that the uninstall string will be an MSI command. (All the machines & versions of Java used the same format.)
This is a Windows 7 Enterprise (32-bit) environment, but the script also works on 64-bit installations of Windows 7 Enterprise.
I've tested this with 7u11 and went as far back as 6u21. It should work with just about any version that uses MSI for uninstalling.
@echo off
setlocal enabledelayedexpansion
echo. & echo Checking for Obsolete Versions of Java...
for /f "usebackq tokens=*" %%a in (`reg query HKLM\software\microsoft\windows\currentversion\uninstall`) do (
     rem echo a is %%a
     for /f "usebackq tokens=2*" %%b in (`reg query "%%a" /v DisplayName 2^>nul ^| find /i "java"`) do (
          rem echo b is %%b
          rem echo c is %%c
          for /f "usebackq tokens=3,4" %%d in (`reg query "%%a" /v UninstallString 2^>nul`) do (
               echo.     Removing %%c
               rem echo d is %%d
               rem echo e is %%e
               set uninstallcmd=%%e
               set uninstallcmd=!uninstallcmd:^/I=^/X!
               rem %%d %%e /qb-
               %%d !uninstallcmd! /qb-
:end
endlocal
Standard Dislaimer:*
Neither I nor the respective owners and/or maintainers of Oracle make representations about the suitability of this software for any purpose. This material is provided "as is", with absolutely no warranty of the attached items whatsoever, whether express, implied, or statutory, including, but not limited to, any warranty of merchantability or fitness for a particular purpose or any warranty that the contents of the item will be error-free. Any use is at your own risk. Blah blah blah.

"Could not create SSOToken" error while setting agent for SSO

Hello,
I configured my agent as follows:
Version: 3.0
Build Date: 20071212
Application Server Config Directory : C:\Sun\SDK\domains\domain1\config
Application Server Instance name : server
Access Manager URL : http://juno:6140/opensso
Domain Administration Server Host is remote : false
Agent URL : http://juno:8080
Deployment URI for the Agent Application : /agentapp
Encryption Key : J+KQLOM+s6gAQb1Y1H8uJoej3bzKBAEN
Agent Profile name : asagent
Agent Profile Password file name : c:\temp\password.TXT
Agent installed on the DAS host for a remote instance : false
The AM and the sample applications are both running on separate domains.
Following steps I performed:
1. I started my SSO domain (domain2) first and then the application domain where my agent is installed (domain1).
2. I deployed the agentsample.ear file after compilation through build.xml file
When I try to access the URL (http://localhost:8080/agentsample/index.html), it throw the following exception (recorded in amSSO log file located in the Agent_001
12/14/2007 11:16:16:242 AM EST: Thread[httpSSLWorkerThread-8080-0,10,Grizzly]
12/14/2007 11:16:16:242 AM EST: Thread[httpSSLWorkerThread-8080-0,10,Grizzly]
could not create SSOTOken for token ID AQIC5wM2LY4SfcykqWPzOYlM/mkFg8E9ozYLBizVono/kDE=@AAJTSQACMDE=#
com.iplanet.dpro.session.SessionException: Service URL not found:session
     at com.iplanet.dpro.session.Session.refresh(Session.java:1133)
     at com.iplanet.dpro.session.Session.getSession(Session.java:808)
     at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:154)
     at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:300)
     at com.sun.identity.authentication.AuthContext.getSSOToken(AuthContext.java:1105)
     at com.sun.identity.security.SystemAppTokenProvider.getAppSSOToken(SystemAppTokenProvider.java:87)
     at com.sun.identity.security.AdminTokenAction.run(AdminTokenAction.java:222)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.identity.common.PropertiesFinder.getProperty(PropertiesFinder.java:49)
     at com.iplanet.am.util.SystemProperties.get(SystemProperties.java:255)
     at com.iplanet.am.util.SystemProperties.get(SystemProperties.java:298)
     at com.iplanet.dpro.session.SessionID.<clinit>(SessionID.java:90)
     at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:153)
     at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:300)
     at com.sun.identity.authentication.AuthContext.getSSOToken(AuthContext.java:1105)
     at com.sun.identity.security.SystemAppTokenProvider.getAppSSOToken(SystemAppTokenProvider.java:87)
     at com.sun.identity.security.AdminTokenAction.run(AdminTokenAction.java:222)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.identity.common.configuration.ConfigurationBase.isLegacy(ConfigurationBase.java:180)
     at com.sun.identity.common.configuration.ConfigurationObserver.createAttributeMapping(ConfigurationObserver.java:62)
     at com.sun.identity.common.configuration.ConfigurationObserver.<init>(ConfigurationObserver.java:58)
     at com.sun.identity.common.configuration.ConfigurationObserver.<clinit>(ConfigurationObserver.java:50)
     at com.sun.identity.common.DebugPropertiesObserver.<clinit>(DebugPropertiesObserver.java:44)
     at com.sun.identity.agents.arch.AgentConfiguration.bootStrapClientConfiguration(AgentConfiguration.java:587)
     at com.sun.identity.agents.arch.AgentConfiguration.initializeConfiguration(AgentConfiguration.java:1008)
     at com.sun.identity.agents.arch.AgentConfiguration.<clinit>(AgentConfiguration.java:1321)
     at com.sun.identity.agents.arch.Manager.<clinit>(Manager.java:622)
     at com.sun.identity.agents.filter.AmAgentBaseFilter.initializeFilter(AmAgentBaseFilter.java:217)
     at com.sun.identity.agents.filter.AmAgentBaseFilter.getAmFilterInstance(AmAgentBaseFilter.java:279)
     at com.sun.identity.agents.filter.AmAgentBaseFilter.doFilter(AmAgentBaseFilter.java:64)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:230)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:198)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:288)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:271)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:202)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:270)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:339)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:261)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:212)
     at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:361)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
     at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
12/14/2007 11:32:28:916 AM EST: Thread[httpSSLWorkerThread-8080-0,10,Grizzly]
12/14/2007 11:32:28:916 AM EST: Thread[httpSSLWorkerThread-8080-0,10,Grizzly]
could not create SSOTOken for token ID AQIC5wM2LY4SfcyqQ1KVtRFCVm5y4qGBf7JcHCnC6du58xk=@AAJTSQACMDE=#
com.iplanet.dpro.session.SessionException: Service URL not found:session
     at com.iplanet.dpro.session.Session.refresh(Session.java:1133)
     at com.iplanet.dpro.session.Session.getSession(Session.java:808)
     at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:154)
     at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:300)
     at com.sun.identity.authentication.AuthContext.getSSOToken(AuthContext.java:1105)
     at com.sun.identity.security.SystemAppTokenProvider.getAppSSOToken(SystemAppTokenProvider.java:87)
     at com.sun.identity.security.AdminTokenAction.run(AdminTokenAction.java:222)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.identity.common.PropertiesFinder.getProperty(PropertiesFinder.java:49)
     at com.iplanet.am.util.SystemProperties.get(SystemProperties.java:255)
     at com.iplanet.am.util.SystemProperties.get(SystemProperties.java:298)
     at com.iplanet.dpro.session.SessionID.<clinit>(SessionID.java:90)
     at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:153)
     at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:300)
     at com.sun.identity.authentication.AuthContext.getSSOToken(AuthContext.java:1105)
     at com.sun.identity.security.SystemAppTokenProvider.getAppSSOToken(SystemAppTokenProvider.java:87)
     at com.sun.identity.security.AdminTokenAction.run(AdminTokenAction.java:222)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.identity.common.configuration.ConfigurationBase.isLegacy(ConfigurationBase.java:180)
     at com.sun.identity.common.configuration.ConfigurationObserver.createAttributeMapping(ConfigurationObserver.java:62)
     at com.sun.identity.common.configuration.ConfigurationObserver.<init>(ConfigurationObserver.java:58)
     at com.sun.identity.common.configuration.ConfigurationObserver.<clinit>(ConfigurationObserver.java:50)
     at com.sun.identity.common.DebugPropertiesObserver.<clinit>(DebugPropertiesObserver.java:44)
     at com.sun.identity.agents.arch.AgentConfiguration.bootStrapClientConfiguration(AgentConfiguration.java:587)
     at com.sun.identity.agents.arch.AgentConfiguration.initializeConfiguration(AgentConfiguration.java:1008)
     at com.sun.identity.agents.arch.AgentConfiguration.<clinit>(AgentConfiguration.java:1321)
     at com.sun.identity.agents.arch.Manager.<clinit>(Manager.java:622)
     at com.sun.identity.agents.filter.AmAgentBaseFilter.initializeFilter(AmAgentBaseFilter.java:217)
     at com.sun.identity.agents.filter.AmAgentBaseFilter.getAmFilterInstance(AmAgentBaseFilter.java:279)
     at com.sun.identity.agents.filter.AmAgentBaseFilter.doFilter(AmAgentBaseFilter.java:64)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:230)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:198)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:288)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:271)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:202)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:270)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:339)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:261)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:212)
     at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:361)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
     at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
I spent lot of time refering the supporting document but could not find any solution.
Your assistance will be greatly appreciated.
Thanks,
Vinit

Seems that the « Reuse connection » command is essential to assure that an application use ONLY ONE Jco. I get rid of the disconnectIfAlive.
Recommendation 1: Put all the BAPIs that you call in the same system into the same model!
Recommendation 2: If you canu2018t follow recommendation 1, make sure that the two models synchronize their (JCo) connections!
// two separate model instances are created ...
MyFirstModelTypemodelMyFirst= (MyFirstModelType) WDModelFactory.getModelInstance(
MyFirstModelType.class,
WDModelScopeType.APPLICATION_SCOPE);
MyOtherModelTypemodelMyOther= (MyOtherModelType) WDModelFactory.getModelInstance(
MyOtherModelType.class,
WDModelScopeType.APPLICATION_SCOPE);
// ... but the first model manages and provides the
// connection for the other model
modelMyOther.setConnectionProvider(modelMyFirst);
Edited by: Emanuel Champagne on Jun 27, 2008 2:38 PM

Report layout in french not displaying french characters properly

Hello,
I have a report layout that I have created with a 3rd party tool (j4ldesigner). All it has on it is one label (displaying a couple of french characters as a test
). Within APEX I have created a test report layout and imported it as a named column report layout type. I then created a very simple report query and associated it with the test layout. When I run the test report, the layout launches but the characters éâ appear as Ã©Ã¢.
So I'm thinking this has to do with language somehow. I have other reports which are generic named column reports, but those are manually entered and seem to work fine. The named column layout is imported, and I'm assuming some sort of conversion is happening where those special french language characters are concerned.
The fact is this is a 11.2.0.3 database. I was assuming the language set would use the standard language librariy files which come with 11G (ie $ORACLE_HOME/nls/data) so I wouldn't have an issue. Since it is not working, do I need to use the language files associated with 9idata? Or is there an init.ora parameter I am missing?

Hello,
Within APEX I have created a test report layout and imported it as a named column report layout type.Make sure the Report Layout File is in UTF-8 encoding. Most of the times, the issue is with file encoding type.
If you use text editors like [url http://notepad-plus-plus.org]notepad++ you can see and convert from one encoding to other.
Regards,
Hari

DPM 2012 Install Fails, The Database was not Created ID 811

Hi.
I've tried installing DPM on a Standalone Server (SQL + DPM), and get the "Database was not Created" error. I initially tried DPM 2012 R2, and found that there is an issue with Disjoint Namespaces, so went to DPM 2012 SP1, but still getting
the same error.
The Install Account has full access rights (sysadmin) to the DPM SQL Instance, however cannot seem to get it right. The account using to do the install has full Enterprise admin, Domain Admin, Backup Operators & Administrators rights.
When opeining SQL Managemet studio, I can see the database has been created but the setup fails and requires me to revert.Here is the last few lines of the Install Log File, please help I always mark as answer.
2014-10-01 08:54:49 PM] Information : Configuration.DBConfigurator: Setting Read_Committed_SnapShot ON
[2014-10-01 08:54:49 PM] Information : Creating tables
[2014-10-01 08:54:49 PM] Information : Execute the SQL script
[2014-10-01 08:54:49 PM] Data : FileName = "D:\Program Files\Microsoft System Center 2012\DPM\SQL\100\Tools\Binn\SQLCMD.EXE"
[2014-10-01 08:54:49 PM] Data : Arguments = -b -E -d DPMDB_S_PRODBACKUP -i MiniSetupDBConfiguration.sql -r -S S-PRODBACKUP\SCDPM
[2014-10-01 08:54:49 PM] Data : Error code = 0
[2014-10-01 08:54:49 PM] Information : Adding DPM Server entry in tbl_AM_Server table
[2014-10-01 08:54:49 PM] Information : Preloading Microsoft.Internal.EnterpriseStorage.Dls.AgentManager.DB.InstalledAgents
[2014-10-01 08:54:49 PM] Information : Preloading Microsoft.Internal.EnterpriseStorage.Dls.EngineUICommon.DpmThreadPool
[2014-10-01 08:54:50 PM] Data : Database connection string = Integrated Security=SSPI;server=S-PRODBACKUP\SCDPM;Pooling=false;database=DPMDB_S_PRODBACKUP;Pooling=false
[2014-10-01 08:54:50 PM] Information : Grant execute permissions on dbo.prc_MOM_ProductionServer_Get to DPMDBReaders$S-PRODBACKUP
[2014-10-01 08:54:50 PM] Information : Grant execute permissions on dbo.prc_MOM_HeartBeat_Get to DPMDBReaders$S-PRODBACKUP
[2014-10-01 08:54:50 PM] Information : Configuration.DBConfigurator: Registering DPM category
[2014-10-01 08:54:50 PM] Information : Configuration.DBConfigurator: Adding DPM Category to GlobalSettings table
[2014-10-01 08:54:50 PM] Information : Configuration.DBConfigurator: Adding ConsiderOfflineMediaToCheckOffsiteReady to GlobalSettings table
[2014-10-01 08:54:50 PM] Information : Add job definitions
[2014-10-01 08:54:52 PM] Information : Creating schedules
[2014-10-01 08:55:00 PM] * Exception : => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception
from HRESULT: 0x800706BE)
   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CProxyUtils.HandleErrors(Int32 hr, tagSAFEARRAY* exceptionResult)
   at Microsoft.Internal.EnterpriseStorage.Dls.Engine.SchedulerServicesProxy.Register(String scheduleXml)
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
[2014-10-01 08:55:00 PM] * Exception : => The DPM database was not created.Use Add or Remove Programs in Control Panel to remove the DPM files and registry entries that were created during Setup. Verify that SQL Server is properly installed and that
it is running, and then run Setup again.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.DatabaseConfigurationException: exception ---> System.Reflection.TargetInvocationException:
Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception from HRESULT: 0x800706BE)
   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CProxyUtils.HandleErrors(Int32 hr, tagSAFEARRAY* exceptionResult)
   at Microsoft.Internal.EnterpriseStorage.Dls.Engine.SchedulerServicesProxy.Register(String scheduleXml)
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
   --- End of inner exception stack trace ---
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterSchedule(String scheduleXmlFile)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.PopulateDefaultScheduleDefinitionsInDatabase(DBConfigurationReader dbCfgReader)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.AddJobAndScheduleDefinitions()
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.MiniSetupConfiguration.PopulateDB(Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.MachineSpecificConfiguration(Boolean existingDB, Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
*** Mojito error was: DatabaseCreateFailed; 0; None
   --- End of inner exception stack trace ---
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.MachineSpecificConfiguration(Boolean existingDB, Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.Configure(Boolean existingDB, Boolean upgrading, String databaseLocation, String sqlServerMachineName, String instanceName, Boolean oemSetup)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.Configure()
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallDpm()
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: DatabaseCreateFailed; 0; None
[2014-10-01 08:55:02 PM] *** Error : The DPM database was not created.
Use Add or Remove Programs in Control Panel to remove the DPM files and registry entries that were created during Setup. Verify that SQL Server is properly installed and that it is running, and then run Setup again.
ID: 811
[2014-10-01 08:55:02 PM] Information : Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components
copied during installation.
For details, click the Error tab.
[2014-10-01 09:33:51 PM] Data : Error Code Web Link =
http://go.microsoft.com/fwlink/events.asp?ProdName=Microsoft System Center Data Protection Manager&ProdVer=4.1.3313.0&EvtID=811&EvtSrc=MSDPM&LCID=1033&P2wAppId=p2wMsdpmEE

Hi,
Check the SQL Agent account on the remote SQL server and make sure the user account syntax is in the form of UserName\DomainName and not UserName@DomainName - if it is change it.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Layouts in OBPM10GR3 not created in Enterprise

Similar Messages

Maybe you are looking for