"Layouts" Panel no longer working in "Create" Mode for photobook

I have been trying to make a photobook. Due to the large size, and therefore suuuper slowness of the computer, I have mostly been opening and working on individual pages only. I generally open the entire photobook only to change the picture layout for a given page since that function isn't available to me when I work on the pages individually. (When I originally saved my project, a separte folder was created with files for individual pages. I found that by opening one of those, i was able to work on only 1 page, which helped the program run a lot quicker, and any changes I made to individual pages were reflected in the overall photobook)
However, for some reason while working on the entire photobook in "Create" mode, nothing shows up when I click on the "Layouts" panel on teh bottom right. I can skim through the pages, and open the Graphics, but when I click "Layouts" the side-bar stays grey.
Is there a way to fix this?

If you look at the FM Update/Download web page, there was a fix for Zapf Dingbat problems years ago that you could try, but if I were you, I'd trash what sounds as if it's a corrupted or incompatible font file and update with an Open format Dingbat font....
Art

Similar Messages

  • OS 10 has prompted a requestion to uncheck a box next to open in 32 bit..howver the box is already unchecked..itunes no longer works in OS 10 for me! Dang. Any suggestions?

    OS 10 has prompted a requestion to uncheck a box next to: open in 32 bit..however the box is already unchecked..itunes no longer works in OS 10 for me! Dang. Any suggestions?

    Persistent message to deselect 32 bit option - https://discussions.apple.com/thread/5955627 - old plug-ins

  • Show history no longer works above enable mode

    Somewhere in the 15.2 train I noticed I could no longer see the command history in global config or any other config mode. It only works in enable mode.
    Has anyone else noticed this?
    Do I now have to enable show history for config mode?

    Hi Jason,
    I didn't know so far that the output of "do show history" in config mode shows the config commands too, particulary because the command description only says:
    To list the commands you have entered in the current EXEC session, use the show history command in EXEC mode.
    But your're right, with my 12.4(21) it does:
    R1(config)#do show history int loop0 ip addr 192.168.1.1 255.255.255.0 end
    However, if they've changed that behavior somewhere in 15.2, there's a simple alternative:
    R1#show run | b ^archivearchive     log config      logging enable      hidekeys!R1#show archive log config all idx   sess           user@line      Logged command 1     3        console@console  |interface Loopback0 2     3        console@console  | ip address 192.168.1.1 255.255.255.0
    That's even better because the archive remains after logoff.
    Hope that helps
    Rolf

  • The Shockwave for Director plugin is no longer working in Firefox 7 for mac

    Dear Firefox,
    I run a website which uses Adobe's Shockwave for Director plugin to view an animation. This plugin worked perfectly in Firefox for mac, up until Firefox 7. Firefox now sees it only as an unknown added plugin and the animation can no longer open. I have the latest plugin version installed from Adobe, which works fine in Firefox 7 for windows, in Safari (mac, win) and Internet Explorer (win). The Flash plugin is also working fine.
    In the preference panel, I have allowed Adobe to install plugins. Do I need to change other settings? Is something stopping Firefox for mac from properly loading the plugin?
    Many thanks for your help.

    Have you tried this one?
    https://addons.mozilla.org/en-US/firefox/addon/roomy-bookmarks-toolbar/

  • How to Create (CREATE MODE) for four details table.....

    Hello,
    I am using ADF Faces, BC for my web app. Now, I have one master, and four details table in my page. How will I automatically make them in insert/create mode, upon loading the page...
    Thanks.

    Thanks,
    That actually worked for me! :) My question now is, what's the difference between, CREATE and CREATEINSERT? Im quite new to ADF...
    And another thing, when I click a button inside my page, while they are in CREATE MODE, my application throws the following exception:
    Error Message:
    JBO-35007: Row currency has changed since the user interface was rendered. The expected row key was oracle.jbo.Key[-27 ]
    Error Stack Trace:
    oracle.jbo.JboException: JBO-35007: Row currency has changed since the user interface was rendered. The expected row key was oracle.jbo.Key[-27 ]
         at oracle.adf.model.binding.DCBindingContainerState.throwRowNotFoundException(DCBindingContainerState.java:204)
         at oracle.adf.model.binding.DCBindingContainerState.validateIterator(DCBindingContainerState.java:227)
         at oracle.adf.model.binding.DCBindingContainerState.validateStateFromString(DCBindingContainerState.java:366)
         at oracle.adf.model.binding.DCBindingContainerState.validateToken(DCBindingContainerState.java:442)
         at oracle.adf.model.binding.DCBindingContainer.validateToken(DCBindingContainer.java:3357)
         at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:104)
    Thanks!

  • My digital signatures no longer work the credential selected for signing is invalid

    Adobe Acrobat Pro My digital signatures no longer work  I get the error of "the credential selected for signing is invalid" when I try to add my signature
    Even my old signatures on all my previous signed documents from years ago are broken now. How do I reset this and get it all up and running again? Ive looked and cant find a solution to this.
    HELP!!!

    I have the same problem, very frustrating to suddenly have digital signatures fail!

  • Is there a way to enable the "protect tones" box while working in Lab mode for dodging and burning?

    Is there a way to enable the "protect tones" box while working in Lab  Color mode for dodging and burning?

    Don't think so. Those algorithms are built around the RGB color model as far as I know and there is no way to achieve the same result in other color modes. It may not be programmaticalyl and matehmatically impossible, but it's probably too complicated for a quick solution due to constant color space conversion math getting involved.
    Mylenium

  • App No Longer Works After Creating EJB Session Bean

    I am using EJB3.0 and using JDEV 11g, PS1. I have used EJB to create my entities from tables and then i created my ejb diagram. After doing that my application (i have a jspx page) that runs fine. Once I create my session bean, I am no longer able to run my application. After creating my session bean I get the following error when I run the application (i.e. not at build/compile time).
    <Feb 12, 2010 3:28:57 PM PST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1266017332257' for task '5'. Error is: 'java.lang.ClassNotFoundException: javax.faces.webapp.ConverterELTag'
    java.lang.ClassNotFoundException: javax.faces.webapp.ConverterELTag
    If i delete the sessionejb.java, ejbbean.java, and the ejblocal.java files, I am able to run my application again. Am I missing something or is this a bug?
    Thanks.

    Did you solved the problemn? I'm getting this, when I try run my App doesn't work, but if I deploy to WLS Integrated and go to URL it's work...

  • Touch no longer works after replacing screen for Yoga 2 Pro

    Screen was cracked so I replaced the screen.  Now touch doesn't work.
    There is no "Pen and Touch" and "Tablet PC Settings" in Control Panel.  In PC info it says, "No pen or touch input is available for this display."
    Touch DOES work on LENOX as I ran it from a usb drive, so it is not a hardware problem.
    I have reinstalled Windows.
    I have another Yoga 2 Pro and comparing Device Manager in both I see no differences.
    How can I get the touch to work again?

    ColonelONeill wrote:
    Does uninstalling and reinstalling the touch screen device under Device Manager get it to show up?
    Well, I did update the display adapter and the HID-compliant touch screen driver, and a host of other drivers.  Also did a reinstal of windows from system restore, but I guess as far as specifically uninstalling and reinstalling the touch screen device, I guess not.
    I sent the laptop to the company who I bought the screen from, (Laptop Repair 365) because they said that they would fix it for free.  I sent it yesterday and they already got it today and said they fixed it.
    I asked what was wrong and they said a falty screen and they replaced it under warrenty for free.  Great company!
    I still don't understand.  The touch worked when running linux so how could it be a falty screen?

  • Why does Digital Edition not work in desktop mode for WIndows 8?

    I have installed the most recent version of JAVA and then downloaded and installed Digital Editions.  I can open Digital Editions in desktop mode but when I select a book I cannot turn the page or move to a new page by any means.  The only thing that seems to work is to select a new page and then toggle between full screen and partial.

    I don't think ADE uses Java at all.
    I run it in desktop mode in WIndows 8 and it reads books and turns pages fine: either using the left-right arrow keys,
    or clicking on the forward/back buttons each side of the scrollbar at the bottom of the page.
    There are lots of bugs in ADE2.0, and even though that isn't a bug for me it may be for you.
    Try replacing ADE2.0 with the older but more reliable v1.7.2.
    (You can have them both installed at once if you like.)
    Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
    http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
    The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172

  • How do I get on-screen keyboard to work in tablet mode for Satellite Radius?

    I have a Radius P55W-B5318.  I love it, but when I use it in tablet mode, I can't seem to figure out how to get the on-screen touch keyboard to come up, which is necessary if I'm going to use it as a tablet. Any solutions? What am I missing here?

     
    Satellite Radius14 E45W-C4200
    Right-click the desktop, point to New, and click Shortcut. Type osk, click Next, type On-Screen Keyboard, and click Finish. 

  • Dissolve transition no longer working in slide show for iPhone using iOS 7.0.6

    The standard slideshow function for still photography in iOS has options for dissolve wipe across, wipe down, Ripple and Cube; however, dissolve &amp; the two wipe transitions immediately switch from one photo to the other without a gradual transition. Apple: an iOS upgrade is needed to fix this, please.

    Similar problem for me, twice now all my contacts have gone.
    First time was a couple of months ago and they came back by themselves after half hour!!!
    (what are those numbers going playing around like children? )
    This time it was a major problem as I was traveling and needed to contact a person urgently.
    Also the Calendar appeared empty and I needed to check the coming appointment for the morning.
    I was able to recover going inside iCloud settings and disable the synch for contacts and calendar.
    Shout off the phone. Switch on the iPhone and then setting again ON the iCloude synch for contacts and calendar. After few minutes they did come back.
    I don't know if there are numbers missing. It doesn't appear so.
    But the problem has been very frustrating and created major problem even if for just half day.
    Dear Apple,
    is it possible to solve the issue and avoid that it will happen again?
    I was assuming that once my numbers are on the phone, they are not cancelled unless specifically asked.
    Thanks.
    Best regards,
    Giuseppe

  • The print.print_to_filename option in about:config no longer works in Firefox 10 for Linux

    I have an older linux box with firefox 3, I believe. And, in about:config I can set the option print.print_to_filename to a path then when I print it defaults to the path I want it to save the PDF to. However, on my new box which has FF10.01 such option doesn't exist and creating it doesn't seem to have any effect. Was this removed? It was a great feature. I don't want to have to install and configure cups again as firefox does the job fantastically. Is there a workaround or can this be brought back in the current version?

    The problem exists with https://www.nytimes.com/ so, as a workaround, you can use http://www.nytimes.com/ (not https) or http://nytimes.com where I don't see the problem.
    Related bug report, if anyone wants to keep track, so that they can reset the '''security.mixed_content.block_active_content''' preference, when it's fixed (read [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html Bugzilla Etiquette] before commenting in bug reports):
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=862164 Bug 862164] - https://www.nytimes<!---->.com/ does not render properly because of mixed content blocking

  • "Layout" option on print screen no longer working?

    Hi,
    I've been using the Layout menu on the print dialogue to create 6 slide per page handouts for some time now. However, I just decided to do a clean install of leopard (computer had leopard installed before wipe, too). Now, the Layout option no longer works. I can select a layout, and then Save to PDF as I always have, but the PDF that results only has a single slide per page. I have no idea why this is happening. Does anyone have a solution?

    Bumping this, hoping someone can answer. It's a serious hinderance to my workflow. Just as a bit of extra info -- it happened to BOTH my wiped and reinstalled macs.

  • USB ports no longer working after 10.4.7 update

    Hi, I ran the latest update (10.4.7) on my machine which is a G4 Quicksilver PowerPC. I have an Apple 17 inch flat screen display that has two USB ports attached. I had my keyboard plugged into one of the USB ports on my flat screen. After the update both USB ports on the flat panel no longer work! I can use the USB ports directly off the G4 itself and it works fine. Has anyone seen this issue? I guess I am stuck now until Apple decides to fix this?
    Thanks,
    Rob

    In my experience, the USB ports on the back of an Apple monitor can be re-enabled simply by unplugging and plugging back in the device in question. You might also check to see that the USB Monitor hub shows up in System Profiler. My Apple monitor USB ports experienced no changes in moving to 10.4.7.
    bd

Maybe you are looking for

  • Apps available for download will not load in CC desktop application?

    I have CC at work on my Mac pro and it works fine, however I just installed it on my MacBook Pro and when I try to go to the Apps panel to download the applications, nothing ever loads and I just have a rotating loading icon. Anyone have a solution?

  • Editing photo results in error

    Hi, I'm using iPhoto 8.1.2 (424) on a Macbook Aluminum first gen. The last few days I've had trouble editing photos in iPhoto which I cannot fix with a restart or even a reboot. The problem is every time I edit a photo and click done the photo size g

  • I have lost the home icon. How can I get it back on toolbar.

    no further info. Home icon is not on toolbar. How can I retrieve it.

  • Play Count after iTunes 5 upgrade

    Since upgrading to iTunes 5 from 4.9, most (but not all) of my play counts have been turned into a series of random numbers, such as -1088620803. Anyone else have this problem? I think I've been spared all the other bad stuff, although I really disli

  • How to find the first occurrence of a string2 in string1

    Hello I've got a string, and I want to know where '-' occurs the first time. I mean, in 'hello-world', the first one is position 5. In C++, I've got: Result      = strcspn(string1, string2); How can I do it in Java? Thank you very much.