LAYOUTS STANDAR  EN CRYSTAL

Cordial saludo
Quisisera saber si exiten  layauts standar  en crystal para  los documentos  que  operan en colombia  o hay que empezar de ceros a construirlos
de antemano gracias

Hola,
Creo que tienes que construirlos desde cero, SAP no tiene nada estandar.
Un saludo,
Tere

Similar Messages

  • Print Layout Designer or Crystal.....! What to do?

    Dear All,
    We need to link our User forms to Print layouts in order to make our reports work exactly the way SAP reports work. Is there a way to enable the print and print preview toolbar buttons and make them show our Report Layout? So far the response from SDK Forum is not encouraging and many questions regarding the same issue remain unanswered there.
    After looking for the solution in the SDK Forums we came across these two replies from Mr. Nick He and Mr.Frank Moebius. Both are of the opinion that currently SAP does not offer a support for this feature and better use a third party tool. We are not in a position right now to opt for any third party tool but if we get a clear response from your side regarding this matter, we can go for it. Kindly have a look at the following links:
    Re: Print Layout  Design for user form in SapBusinessOne2005A(6.80.317) sp:01.?
    Re: Add PLD Layouts in 2005 through sdk
    The recommended solution within SAP B1 to develop Add-on reports is through User Queries and creating a Print Layout and run them via Query Manager Window. This approach in our view has the following drawbacks that make it less friendly with the end user:
    1. Add-on forms appear in the left pane/menu, whereas reports would have to run through Query Manager only, which is in fact a small toolbar button on the top right side. We can add the Query Manager link to user menu but it doesn’t solve the problem.
    2. A user with full authorization over the Print Layout can accidentally overwrite it by clicking the Create Report Button, whereas in case of SAP Reports the Layouts remain unchanged and only saved as a new Layout and set as Default Layout for a report. Add-on Reports cannot do this.
    3. Different behavior of Layouts in Query Manager on Single Click and Double Click. In the Query Manager, if a user just selects a query by a Single Click and views a Print Preview (Layout) then the custom user Layout appears. But if a user Double clicks a query then the Query Window appears, exposing the query and making it editable. Also the Preview(Layout) is different in this case. The user can either view the Window or Table Layout in this case. Hence this exercise would make the user confused and prone to errors.
    4. The Parameter/Criteria window that is SAP generated is not enough to fulfill user friendly interface requirements. Is there a way to add List boxes or Combos to that form. The parameter selection Checkboxes also behave in a strange way that even the experts find difficult to manipulate. If they are of no use, what’s the point in having them on the form in the first place.
    All these points are leading us to confusion over the decision as to whether go for Query Based Reports or use Third Party tools. Kindly help us out in this regard. Your response would help us save some valuable time for our Add-on Development.

    <<< If there is a solution then it has to be from SDK. We can only opt for third party components and frameworks only if any of the SAP representatives ensure us that the current version of SDK does not offer such support.>>>
    The answer to that is to lodge your query as an Issue to SAP directly as a support question or go through your local SAP representative. If the functionality is not offered by SAP you can do a Development Request ( DRQ) and SAP will develop it if they think it will become userful.
    <<<If this Forum is not meant to be answered by SAP representatives then kindly tell me any other Technical Support Portal from where i can get the answer directly. >>>
    This forum is accessed mostly by SAP Business One Developers on SDK. However we are fortunate that some SAP employees who are very knowledgeble take some time off to answer queries.
    Since it is a Forum, no one is obliged to answer. As indicated above , Try SAP directly if you need a definite answer.
    <<<>>>
    Since you mentioned Crystal: We as SAP Business One SDK developers, have come across similar issues and opted for a Inhouse developed Crystal Solution. It has been so popular we are selling it as a Generic add-on to B1.
    Regards,
    Indika.

  • Print layout different with crystal report 2008 runtime

    Hi,
    I have reports which I print on a pre printed stationary. With Crystal report 11.5 run time it works fine.
    Now I am using Crystal Report 2008 run time and with this I found that layout on the print is different than the actual layout in the design.
    The print with CR 2008 run time is not exactly matching with the pre printed stationary. Whereas it is working fine with the 11.5 run time.
    Can anyone please help?
    Thanks,
    Abhijit Gorhe

    hi,
    you can verify the settings
    File -> Page Setup
    - Printer Options
    - Page Options
    - Margins
    Regards,
    Vamsee

  • Print layout designer using Crystal report

    Hi Dear;
    how can i create a print layout in crystal report instead of print layout designer
    is any conversion of should i created from scratch?
    from where can i download the crystal report templates?
    regards;

    Hi,
    There is no conversion tool between these two reports.  You have to create them from scratch.
    Check these threads to find out more:
    Sample Crystal Reports
    Re: SAP Business One and Crystal Reports
    Thanks,
    Gordon

  • Create a layout printing in Crystal Reports

    Hello friends
    I am new to using crystal reports, I have worked and made ​​reports in Crystal Reports
    What I want is to know how to layout and reports.
    I have a print layout I've done what I wanted manual is to make it crystal and can call it from a marketing document
    I want to know step by step how to create the connection and add the store procedure or query.
    I hope I can help

    hi,
    please check this thread
    How do I create a crystal report layout with a table and borders
    also check the ff. videos from SAP
    http://www.youtube.com/watch?v=seuAZFjOOhs
    http://www.youtube.com/watch?v=YPGwQ2IbxUE&feature=mfu_in_order&list=UL
    tip:
    you can also try to search from youtube, a lot of training & tutorials you can find there.
    regards,
    Fidel

  • Production order layout - PLD or crystal reports

    hello all
    I need to create a layout for the Production Order.
    I want to try crystal reports or PLD.
    My problem is this - For each production order linked to the same SALES ORDER, I need to print one Production Order layout(JOBCARD) with the work instructions from all the other production orders linked to the same sales order, currently we use coresuite for this, but the production order datasource is not available for SAP HANA yet.
    This is how the current Production order looks in SAP B1, I need to do the same in HANA.
    Thanks in advance
    Janice

    Hi,
    In standard SAP, the above requirement is not possible in PLD.
    You can try with your add-on provider.
    Thanks & Regards,
    Nagarajan

  • Layout issue with Crystal Grouping

    Dear all,
    I have created a report with Graph and the records on the group level. The data and graph is showing perfectly fine however the problem is the layout.
    Right after the graph, data starts to show up, which means, the data adjusts itself either on page 1 or 2 by itself. That makes the report look really bad because half of the data is on the first page and half is on the second page.
    I have looked at the section expert options but did not find where I could say "Start section Group1b from new page".
    Could someone please guide me to the right place?
    here is how report shows up
    Page1
    Graph
    Data
    Data
    Data
    Page 2
    Data
    Data
    Data
    What I would like it to do is
    Page1
    Graph
    Page2
    Data
    Data
    Data
    Data
    Data
    The Group Footer is divided from Group 1a to Group 1p.
    Regards
    Jehanzeb

    I think I answered my own question while typing the question.
    I placed the graph on the group header and kept the footer for the data and clicked on Keep group together.
    It worked like a charm
    Regards

  • Text UDF Disappear in CRYSTAL Layout

    Hi all,
    I built a SBO layout for sales quotation in crystal 2008.
    When i display the layout in the crystal editor every thing works fine, but when i open the layout in SBO all the text UDF disappears (including their column headers).
    Numeric UDF are displayed fine.
    Does anyone have a clue for the source of this problem.
    Thanks, Udi

    hi,
    are you using Stored Procedure or direct to tables?
    i will recommend you use Stored Procedure and use the SQL CAST to achieve the desired output.
    regards,
    Fidel

  • Crystal layouts crashes SAP

    Good afternoon experts.
    I'm not sure if this goes in this section.
    We are having an issue with two of our clients whenever they are trying to open a Crystal Report print layout in SAP.
    The first one is trying to preview a Check layout made in Crystal in two terminals (one with Windows XP SP3 and the other with Windows 7 Professional SP1). It freezes SAP and eventually crashes it. This client has SAP 88.1 PL 10
    The second client, in only one terminal, whenever they try to preview a sales order desing in Crystal, SAP automatically crashes. First, it happend only with a layout that included BarCodes, but after we installed Crystal reports 2008 SP01 in every terminal, except this one, it worked fine. This only terminal cannot open ANY layout design in Crystal. This terminal has Windows 7 Professional. This client has SAP 8.8 PL20
    Any comments or ideas?
    Thank you very much!

    Hello,
    You may be using an OEM build of CR 2008 the was integrated into SAP B1. Please post to that forum.
    Make sure the Barcode Font is installed on that one PC
    Don

  • Standard B1 layouts in Crystal Reports

    Hi all,
    Is there any SAP standard B1 layouts created in Crystal Reports (invoice, sales order, etc) ?
    PLD sucks so it will be wonderfull if SAP could deploy standard layouts in Crystal formart.
    Regards,
    Manuel Dias

    Hi,
    You may check this link too: [SAP Crystal Generic samples|https://websmp105.sap-ag.de/~sapidb/011000358700001064612009]
    Regards,
    Bala

  • Crystal Reports 2011/ SBO 9 - Printing Layout on the Stickers Printer

    Hi,
    I Created  The CR Layout for print Stickers.
    I have Zebra Printer
    The Layout's size are optimized to Sticker page size.
    When I Click Print Preview  on the Crystal Reports for SBO 2011 Application - I'm Able to print Successful Sticker.
    When I Try Print The Layout from Sap Crystal Viewer   (Print CR from SBO) - The Sticker gets out empty.
    I have did it on 2 different Printers and have Received same Results.
    Do you Have some solution?!
    thanks,
    Michael

    Hi,
    Please make sure printer settings and page setup in SBO are same.
    Thanks & Regards,
    Nagarajan

  • How do you pass the data from a SBO process to a crystal report laout

    Hi Everyone
    Can someone please assist or direct me to documentation that could be of help.
    I do production orders in SBO.
    I have a crystal report that I have imported as a layout to print these production orders.
    The report was developed the normal way, linking to the tables and returning data(all data for all production orders ever done)
    The production print option is set to make use of this layout.
    What I would like to see is that when I create production order 12345 and click on print preview I get the data of the mentioned order only displayed in my crystal layout(that is set to default)
    What I get however is all the data from the tables.
    Where am I going wrong. With my design already or is there a different way to pass the data to my report/layout direct from my SBO production order screen
    This is quite urgen
    Regards
    Burger

    Hi All
    The solution i was looking for is:
    In Crystal create the parameter called DocKey@
    This is recognized by sap and the active document number is passed to the report layout.
    In crystal itself also do a filter {<Table>.<Column Name>} = {?DocKey}
    So simple once you know how.
    Hope this help someone else that is as stuck as I was.
    Regards
    Burger

  • Problems with consuming SAP BW WSDL in Crystal Reports 2008

    Hello,
    I am trying to use the WSDL generated from the SAP BW in Crystal Reports 2008 using the XML and Web Services driver, but when I input the WSDL url Crystal does not interpret the url passed in as a WSDL url and the Services, Port and Method drop downs are blank.
    If I manually input the values I get the error below from Crystal
    "Logon failed.
    Details: Web Service Location is invalid
    WSDL Exception (at /wsdl:definitions/wsdl:portType/wsp:Policy): faultCode=INVALID_WSDL:Encountered unexpected element
    'Policy'."
    I know this is a valid WSDL as I have tested it with Xcelsius 2008 and I am able to get data back in Xcelsius. I found SAP note 1485601 that talks about Crystal Reports not being able to reading a WSDL generated by a SAP system.
               https://websmp230.sap-ag.de/sap/support/notes/1485601
    Based on the error message from Crystal above I feel that Crystal is unable to read the WSDL URL, has anyone else encountered this issue, if so is there a possible work around.
    We are running Crystal Reports 2008 V1 SP3 FP 3 and the SAP Integration Kit is also on the same service pack and patch level.
    Any help or insight into the issue will be very helpful.
    Thanks,
    Kumar

    Ingo,
    I am using the "XML and Web Services" connection option in Crystal Reports, and using a HTTP WSDL.Here is a sample of how WSDL url generated by SAP BW.
    http://servername:8000/sap/bc/srt/wsdl/bndg_DF6E553E117931F19C6B001560A1B616/wsdl11/allinone/ws_policy/document?sap-client=100
    We have a two structure BW query (one for keyfigures and one as characteristic structure ), I know that this will cause the structure for the characteristics to show up as a single field and each element of the structure will result in a row of data, but we need the individual elements on the structure and we were hoping to get around the MDX driver limitation by using the web service connection.
    The data in the Crystal Reports 2008 needs to be in a crosstab layout as shown below, but if we use the Crosstab expert the key figures are stacked one under the other and also we cannot get the labels from the KPI structure to show up on the Crystal Reports.
                   Characteristic Structure
                 Column1            Column2                     Column3     
    Label 1          KeyFigure 1          KeyFigure 2                    KeyFigure 3
    Label 2          KeyFigure 1          KeyFigure 2                KeyFigure 3
    Label 3          KeyFigure 1          KeyFigure 2                    KeyFigure 3
    This layout is already built in a Web Template and therefore we were planning on using the WSDL to get the layout directly into Crystal report, but I keep running into the WSDL error when I try to consume the WSDL in Crystal.
    Thanks,
    Kumar

  • Saving print layout templates

    In a future release, would it be possible to have a function whereby you can save your print layouts in a folder, as a backup precaution incase you accidentally delete or alter an original one?  At the moment, you can only back the PLD templates up via daily database backups.  I have a customer who has spent a very long time perfecting their print layout templates and he thinks this functionality would be very useful and reassuring.
    Thanks

    Hello Kate,
    Within 8.8 release, we are introducing new control of 'Report and Layout Management' which enables joint management of PLD and Crystal Reports layouts. This enhances the usability of maintenance of print layouts and should reduce a risk of accidential deletion of the print layout.
    Moreover, Crystal Reports can be also saved outside SAP Business One as a separate file (similarly like those for XL Reporter).
    Peter Dominik
    B1 Solution Management

  • How migrate crystal reports to oracle bi publisher ?

    Hi experts,
    i have a experienced with development of crystal reports.
    now my work demands migration of crystal reports to oracle bi publisher.
    may i know how to converts all crystal reports formula's in oracle bi publisher ?
    any help is greatly appreciated.
    Thanks.

    Simple answer, there is NO easy way to convert them.. You will have to get the layout from your crystal report file, then get a copy of data to test query to build data is returned in proper sequence to replicate report.
    If you were converting from Oracle Reports to BI Publisher, then you would have it easier..
    Just be happy you are not where I was 2 years ago.. I had over *600* crystal version 8 report files and started looking at converting them to BI Publisher...
    Thank you,
    Tony Miller
    Webster, TX

Maybe you are looking for