Layouts understanding
Whats the difference between:
Planning Function
Planning Level
Planing Package
Please give easy and clear understanding not only refer to more docs.
Hi,
SEM-BPS has the following structure:
- <b>Planning Areas</b>
In the planning area, by selecting a BW InfoCube, you determine the range of key figures and characteristics with which you want to plan in the planning area. You can also choose InfoCubes from an external BW System. You would access these using an RFC destination.
- <b>Planning Levels</b>
With a planning level, you restrict the amount of data supplied from the InfoCube to whatever is relevant to your planning task. You do this by selecting the desired key figures and characteristics. In the planning level, you can select characteristic values that are to remain constant for all planning packages in the planning level. In the context of the planning level, you also determine which planning functions are to be offered, for example, revaluation or distribution.
- <b>Planning Packages</b>
In a planning package, you can make further restrictions or refine the settings made in the planning level. A planning package can be seen technically as a subset of the superordinate planning level and it describes the data basis on which the planning functions operate. From an enterprise planning perspective, planning packages can serve as worklists where you define a subtask of the total planning task for each planning package and then process this as a manageable task.
- <b>Planning Function</b>
You can use planning functions to enter and change plan data. They are divided into the following groups:
 <i><u>Manual Planning:</u></i> Manual planning is the central function type for planning with SEM-BPS. The planning layouts, which you create for this function type, are used as entry forms for the manual entry of plan data as well as reporting tools for existing data, from which you can directly execute any functions of the type user-defined functions (see below).
 <i><b>Predefined Functions</b></i> for a certain planning purpose (simulation, activity-based management). The main focus of these functions is the definition of alternative scenarios for the simulation of the effects of decisions. These functions employ special PC applications for the actual planning. These applications are, however, integrated into SEM-BPS and they store their plan data in the SAP Business Information Warehouse.
 <i><b>User-defined Functions</b></i> that generate, change or delete plan data by applying various procedures.
- <b>Parameter group</b>
A parameter group describes the concrete form of a user-defined planning function and consists of the settings necessary to carry out the function. In particular, these include details on how data is to be changed in the execution of a function (for example, a percentage rate for "revaluation" functions). The predefined functions have similar options for settings (for example, layouts for manual planning).
A planning area forms the highest classification level in planning and it determines which InfoCube supplies the data basis for SEM-BPS. You can create multiple planning levels for a planning area.
In the planning level, you determine the business environment for the planning. You define a planning level by selecting the characteristics and key figures that you want to use from the InfoCube in the superior planning area. The planning packages are dependent on the planning level. In the planning packages, you define values for the planning level characteristics.
For each planning level, the system automatically creates a basic planning package. You can create other planning packages if you wish. In the planning package, you can further restrict the characteristics selected in the planning level.
The planning functions are also dependent on the planning level. These are displayed automatically by the system when you select a planning level. A planning function can be applied to all the planning packages that belong to a planning level. However, to carry out a planning function, you must create at least one parameter group that contains the settings for the planning function. You must also have selected a planning package whose data the function will access.
Similar Messages
-
Understanding Fluid Grid Layout
Hi,
First of all - I apologize - my English is bad, but I hope you will understand me.
I'm currently watching some video tutorials about responsive web design, particularly about Fluid Grid Layout/Dreamweaver.
To get to the point and to be as simple as possible, my question is: In what cases elements do NOT need to have class="fluid"?
For example, here's part of the code from one video tutorial:
<body>
<div class="gridContainer clearfix">
<header id="header" class="fluid">
<h1>The Best Site Ever!</h1>
<nav id="mainnav" class="fluid">
<ul>
<li><a href="index.html">Home</a></li>
<li><a href="about.html">About Us</a></li>
<li><a href="products.html">Products</a></li>
<li><a href="#">Services</a></li>
<li><a href="#">Contact</a></li>
</ul>
</nav>
</header>
<article id="intro" class="fluid">
<h2>Some Title</h2>
<p>Some thext... </p>
</article>
As you can see above, <header> and <article> elements that are child-elements of <div class="gridContainer clearfix"> have class="fluid". But, let's look inside <header> element - there are two child-elemets: <h1> without and <nav> with class="fluid".
Now, correct me if I'm wrong - If some element has child-elements - it must have class="fluid" (except for the case with ul/ol and its child-elements li), right? For example, element <article id="intro"> must have class="fluid" because it has child element <h2> and <p>, but those child elements will not have class="fluid" because they don't have child-elements. On the other side, child-element (of the <header id="header" class="fluid">) <nav id="mainnav" will have class="fluid" because it has child element (ul). Only in case of lists there are exceptions...Thank you for your response. It isn't the snapping that appears to be the problem. This is an example of what I'm trying to do. Excel was the best way for me to provide a visual. Is this possible? Every time I try to place divs in a similar layout, the div will not take up multiple rows. For example div 4 would move down and where row 7 is would now be row 4. Div 2 would have also moved down because of 5. I have a large image that needs to be placed to the left of a header and vertical menu. I'm trying to keep the header and menu seperate and the image needs to be aligned to the top left of the text. I'm sorry that I'm overcomplicating this. I must admit it surprises me that the fluid grid appears to be dictated by rows. I'm wondering if for this particular design I should just stick to a table.
-
Trouble Understanding CSS Layout and Padding
Hi,
I'm having some serious problems understanding CSS layout techniques and the impact of padding and was hoping I could get some help.
Here are a couple of pages that show examples of what I don't "get". The first has padding that causes the layout to look right. The second doesn't have padding but doesn't lay out as I would expect. Also, the amount of text affects the "bottom" div as well. I'm an old hand at HTML and could do this layout in my sleep using tables. Css is a different, frustrating story.
http://www.libertywebmarketing.com/test/1.html
http://www.libertywebmarketing.com/test/2.html
Thanks.
Fitz21Thank you for the help.There's a lot of valuable info in these answers that I'm going to have to study. I never thought of applying classes to Div tags, but I guess I have to start learning somewhere. I'm not sure how to use the technique, but I'll definately look into it. If I could wake up tomorrow and know what you all know simply by wishing it, I would.
I see that there are many things I have to learn about using CSS and I'd really like to see some real world examples that don't look like typical cheesy CSS designs with columns. If I were going to design this page using HTML, I would probably do something like this: http://www.libertywebmarketing.com/test/3.html
(The last two tables show the table structure and use of a spacer. I know this a seriously antiquated way of doing it, but it's to illustrate what I'm trying to accomplish: Namely, staggered, left/right alternating boxes that will expand properly depending on the amount of copy or the vertical height of the photo in them.)
Dreamweaver 101,
I have "Dreamweaver 8 The Missing Manual" by David Sawyer McFarland, but I find it really concentrates on "typical CSS designs" that look like Content mangement templates. While I agree it's a valuable book, there's nothing in there I have found that addresses anything like what I'm trying to do. Is the Dummies book better for atypical layouts?
Again, thank you all.
Fitz21 -
hi-
im a seasoned actionscript developer but just starting out with osmf. i am having trouble understanding how layouts and layout rendering works.
i have a control bar with all of my ui controls. i also have a 'share' button/panel that i want to live over the video (in depth). i have been making these items custom classes that extend LayoutTargetSprite. then i have create a separate layout renderer for each and layout container to add each to stage. is this the right approach?
there also seems to be a problem with the inital positioning of my items. i setting the alignment properties for the layout target metadata, but everything is appearing top-aligned (i want bottom). i feel like i need to override the 'measure' or 'measuredWidth'/'measuredHeight' methods in my ui classes to return the size i want the targets to be so they are positioned properly, maybe?
this resource has been helpful, but seem a little out of date...?
http://help.adobe.com/en_US/OSMF/1.0/Dev/WSc6f922f643dd2e6d4770fe491265bf34074-7fee.html
i also want to update the control bar size on stage resize, so i should use the LayoutTarget 'layout' method to update the dimensions of the control bar to fit the new width? or should i update the 'width' property of my control bay layout metadata? or something else?
thanks for any tips or resources that might be helpful,
lucasHi Lucas,
We don't recommend making layout renderers for each item that needs to be laid out. In fact you shouldn't be creating layout renderers at all (they are created automatically by the MediaContainer). The best way to layout Media is to add LayoutMetadata to the MediaElements. If you want to integrate layout into your controls, which aren't MediaElements, I wouldn't suggest you place them manually on the stage, and do you yourself. If you absolutely need to use the OSMF layout system, I would recommend creating a MediaElement to wrap your controls, and then give the wrapper the layout metadata you need. The easiest approach though, is to look at the OSMFPlayer example, which has a skinnable player. You can specify image for every button in the player, as well as background color, etc....
We will be releasing a white paper on the subject of layout in the coming weeks. I'll be sure to include a section on laying out your player controls.
Ryan O'Connell
OSMF Engineering -
Dreamweaver CC understanding external style sheets when using Fluid layouts?
I'm attempting to build a website using the Dreamweaver CC Fluid layout feature. I've been using this tutorial:
http://www.adobe.com/inspire/2012/08/fluid-grid-layouts-dreamweaver-cs6.html
The bit i'm stuck at is when it comes to attaching a external style sheet to format the text and content. So to be clear, i've already created my fluid layout and created a 'layout.css' file when promted, then using some html 5 class div tags (header, navigation and article) i've built my layout. All doing what I want up to this point.
Now I need to start adding content and from what I understand its much better practice to set up another external style sheet for the text formatting and styling.
I used the CSS Designer to 'create a new CSS file', called it 'typography.css' and I can see its linked to the main Source Code file.
I understand that theory but here is where its confusing for me:
After creating and linking the new CSS file what do I do next? Do I have to hand code in various text formatting ids or is there a more visual way of doing it? Or do I select my text content in the source code page and then press the '+' button in the 'Selectors' panel to start adding ids that way? And should the class or id names in the new CSS file be the same as in the layout CSS file or different?
I guess I dont really understand excatly how external style sheets should be created and implemented, all the youtube vids i've watched so far are done with hand coding but i'd like to use the Properties panel to do it in a more visual way if possible.
Any tips or help greatly appreciated, some basic learning needed. Thanks.Giving a detailed explanation of how to best use CSS goes beyond the scope of what this forum can do. There are volumes of books, blogs and tech sites devoted to this topic.
A Must Read -- How to Develop with CSS?
http://phrogz.net/css/HowToDevelopWithCSS.html
In a nutshell, make the most of your logical HTML tags. They not only add semantic structure to your content, they serve as hooks for your CSS styles. Don't class or ID something unless you absolutely need it. The goal here is to keep your HTML streamlined.
/**effects all h2 tags in your site**/
h2 {font-size: 125%}
/**only effects h2 tags inside headers**/
header h2 {color:orange}
/**effects all p tags**/
p {font-size: 100%}
/**only effects p tags inside articles**/
article p {color:#333}
Nancy O. -
In this video you’ll continue to further customize your website using CSS or Cascading Style Sheets. With CSS you can control many visual aspects of the website efficiently and consistently. Learn the basics of how CSS rules work and how you can easily take advantage of the power and flexibility of CSS in Dreamweaver including creating and editing your own CSS class.
http://adobe.ly/wTlFxCsome of these tutorials don't really work. changing the body image to scrolling or fixed doesn't change anything on my computer, and apparantly doesn't change anything on the version that the instructor is using either, since he never shows us the "before"
-
I don't understand Muse page layout
Hi all,
In my Muse design, I have a colored header which is continuously at the perfect width of my page (also when I preview in my browser)
When I insert a small picture underneath this header and place them at the exact same position (at top and left) as my colored header, the picture seems to start at another position from the left, when I preview the page.Hi,
On your coloured header do you have full browser width button enabled?
This would cause it to stretch the width of the screen and therefore appear to be in a different position than your picture when you are viewing in preview. -
Open and display image in MVC layout
Hello!
I cant figure out how I shall do this in an MVC layout:
The program request user to open an image file that are then displayed in a JLabel
My setup at the moment resolve in a nullpointerexeption because it dont get any actual image file, but I dont understand what I have missed.
I can not post the whole code fo you to run because it is to big, so I post the part that are the most important. please have a look.
PicturePanel
//Import Java library
import javax.swing.*;
import java.awt.*;
public class PicturePanel extends JPanel {
//Variables
private ImageIcon picture;
//Method to get information of the selected file
PicturePanel (String fileName) {
picture = new ImageIcon (fileName); //Get the filename
int w = picture.getIconWidth(); //Get the image with
int h = picture.getIconHeight(); //Get the image height
//Set preferable size for the image (Use the properties for the selected image)
setPreferredSize(new Dimension(w, h));
setMinimumSize(new Dimension(w, h));
setMaximumSize(new Dimension(w, h));
//Method to draw the selected image
protected void paintComponent(Graphics g) {
super.paintComponent(g); //We invoke super in order to: Paint the background, do custom painting.
g.drawImage(picture.getImage(), 0, 0, this); //Draw the image at its natural state
}From my model:
//Local attributes
boolean check = false; //Used to see if a statement is true or not
PicturePanel pp;
JFileChooser fc;
int returnVal;
//newFile in File menu
public void newFile() {
//Open a file dialog in users home catalog
fc = new JFileChooser();
//In response to a button click:
returnVal = fc.showOpenDialog(pp);
System.out.println("You pressed new in file menu");
}From my controler:
//User press "New" in File menu
else if (user_action.equals("New")) {
//Call method in model class
model.newFile();
//Update changes
if (model.returnVal == JFileChooser.APPROVE_OPTION) {
System.out.println("Hello1");
File f = model.fc.getSelectedFile();
if (model.pp != null)
model.pp = new PicturePanel(f.getAbsolutePath());
System.out.println("Hello2");
//Display image (Here is line 83)
view.setImage_DisplayArea(model.pp);
System.out.println("Hello3");
}From my view:
//Sets the image to be displayed on the image_display area (Here is line 302)
public void setImage_DisplayArea(PicturePanel pp) {
image_display.add(pp);
}The complet error:
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at java.awt.Container.addImpl(Container.java:1015)You pressed new in file menu
Hello1
Hello2
at java.awt.Container.add(Container.java:351)
at View_Inlupp2.setImage_DisplayArea(View_Inlupp2.java:302)
at Control_Inlupp2.actionPerformed(Control_Inlupp2.java:83)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1882)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2202)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:334)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1050)
at apple.laf.CUIAquaMenuItem.doClick(CUIAquaMenuItem.java:119)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1091)
at java.awt.Component.processMouseEvent(Component.java:5602)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3129)
at java.awt.Component.processEvent(Component.java:5367)
at java.awt.Container.processEvent(Container.java:2010)
at java.awt.Component.dispatchEventImpl(Component.java:4068)
at java.awt.Container.dispatchEventImpl(Container.java:2068)
at java.awt.Component.dispatchEvent(Component.java:3903)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4256)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3936)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3866)
at java.awt.Container.dispatchEventImpl(Container.java:2054)
at java.awt.Window.dispatchEventImpl(Window.java:1801)
at java.awt.Component.dispatchEvent(Component.java:3903)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)Edited by: onslow77 on Dec 16, 2009 5:00 PM
Edited by: onslow77 on Dec 16, 2009 5:04 PMHello again!
Anyone that can help me figure out how to implement this in an MVC layout, I feel stuck.
I post a little program that open and display an image file so that you better can understand what I whant to do.
ShowImage
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.io.File;
import javax.swing.filechooser.*;
public class ShowImage extends JFrame{
//Variables
JFileChooser fc = new JFileChooser();
PicturePanel pp = null;
ShowImage () {
super("Show"); //Title
//Create the GUI
JPanel top = new JPanel();
add(top, BorderLayout.NORTH);
JButton openBtn = new JButton("Open");
top.add(openBtn);
openBtn.addActionListener(new Listner());
//Settings for the GUI
setDefaultCloseOperation(EXIT_ON_CLOSE);
pack();
setVisible(true);
class Listner implements ActionListener {
public void actionPerformed(ActionEvent ave) {
int answer = fc.showOpenDialog(ShowImage.this);
if (answer == JFileChooser.APPROVE_OPTION){
File f = fc.getSelectedFile();
//Check
System.out.println(f);
System.out.println(pp);
if (pp != null)
remove(pp); //Clean so that we can open another image
//Check
System.out.println(pp);
//Set the PicturePanel
pp = new PicturePanel(f.getAbsolutePath());
//Check
System.out.println(pp);
//Add PicturePanel to frame
add(pp, BorderLayout.CENTER);
validate();
pack();
repaint();
//Main
public static void main(String[] args) {
new ShowImage();
}PicturePanel
//Import Java library
import javax.swing.*;
import java.awt.*;
public class PicturePanel extends JPanel {
//Variables
private ImageIcon picture;
//Method to get information of the selected file
PicturePanel (String fileName) {
picture = new ImageIcon (fileName); //Get the filename
int w = picture.getIconWidth(); //Get the image with
int h = picture.getIconHeight(); //Get the image height
//Set preferable size for the image (Use the properties for the selected image)
setPreferredSize(new Dimension(w, h));
setMinimumSize(new Dimension(w, h));
setMaximumSize(new Dimension(w, h));
//Method to draw the selected image
protected void paintComponent(Graphics g) {
super.paintComponent(g); //We invoke super in order to: Paint the background, do custom painting.
g.drawImage(picture.getImage(), 0, 0, this); //Draw the image at its natural state
}//The endEdited by: onslow77 on Dec 16, 2009 7:30 PM -
Layout changed when I added spacing around images.
@charset "utf-8";
body {
font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
background: #363;
margin: 0;
padding: 0;
color: #000;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
padding: 0;
margin: 0;
h1, h2, h3, h4, h5, h6, p {
margin-top: 0; /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
padding-right: 15px;
padding-left: 15px; /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
color:#414958;
text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
color: #F00;
text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
text-decoration: none;
/* ~~ this container surrounds all other divs giving them their percentage-based width ~~ */
.container {
width: 80%;
max-width: 1260px;/* a max-width may be desirable to keep this layout from getting too wide on a large monitor. This keeps line length more readable. IE6 does not respect this declaration. */
min-width: 780px;/* a min-width may be desirable to keep this layout from getting too narrow. This keeps line length more readable in the side columns. IE6 does not respect this declaration. */
background: #FFF;
margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout. It is not needed if you set the .container's width to 100%. */
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
background: #363;
/* ~~ These are the columns for the layout. ~~
1) Padding is only placed on the top and/or bottom of the divs. The elements within these divs have padding on their sides. This saves you from any "box model math". Keep in mind, if you add any side padding or border to the div itself, it will be added to the width you define to create the *total* width. You may also choose to remove the padding on the element in the div and place a second div within it with no width and the padding necessary for your design.
2) No margin has been given to the columns since they are all floated. If you must add margin, avoid placing it on the side you're floating toward (for example: a right margin on a div set to float right). Many times, padding can be used instead. For divs where this rule must be broken, you should add a "display:inline" declaration to the div's rule to tame a bug where some versions of Internet Explorer double the margin.
3) Since classes can be used multiple times in a document (and an element can also have multiple classes applied), the columns have been assigned class names instead of IDs. For example, two sidebar divs could be stacked if necessary. These can very easily be changed to IDs if that's your preference, as long as you'll only be using them once per document.
4) If you prefer your nav on the right instead of the left, simply float these columns the opposite direction (all right instead of all left) and they'll render in reverse order. There's no need to move the divs around in the HTML source.
.sidebar1 {
float: left;
width: 20%;
background: #CF0;
padding-bottom: 10px;
.content {
padding: 15px 15px 15px 15px;
width: 80%;
float: left;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
padding: 0 15px 15px 40px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
list-style: none; /* this removes the list marker */
border-top: 1px solid #666; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
margin-bottom: 15px; /* this creates the space between the navigation on the content below */
ul.nav li {
border-bottom: 1px solid #666; /* this creates the button separation */
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
padding: 5px 5px 5px 15px;
display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
text-decoration: none;
background: #390;
color: #000;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
background: #6F7D94;
color: #FFF;
/* ~~ The footer ~~ */
.footer {
padding: 10px 0;
background: #CF6;
position: relative;/* this gives IE6 hasLayout to properly clear */
clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
float: left;
margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
clear:both;
height:0;
font-size: 1px;
line-height: 0px;
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Yellowstone Biologist</title>
<link href="NationalParks.css" rel="stylesheet" type="text/css" /><!--[if lte IE 7]>
<style>
.content { margin-right: -1px; } /* this 1px negative margin can be placed on any of the columns in this layout with the same corrective effect. */
ul.nav a { zoom: 1; } /* the zoom property gives IE the hasLayout trigger it needs to correct extra whiltespace between the links */
</style>
<![endif]-->
<script type="text/javascript">
</script>
</head>
<body onload="MM_preloadImages('habitat def.PNG')">
<div class="container">
<div class="header"><a href= /><img src="animals.gif" width="878" height="193" alt="bison" /></a>
<!-- end .header --></div>
<div class="sidebar1">
<ul class="nav">
<li><a href="NationalParks.html"><strong>Home</strong></a></li>
<li><a href="Park Ranger.html"><strong>Park Ranger</strong></a></li>
<li><a href="Biologist.html"><strong>Biologist</strong></a></li>
<li><a href="Geologist.html"><strong>Geologist</strong></a></li>
<li><a href="Historian.html"><strong>Historian</strong></a></li>
<li><a href="Games.html"><strong>Games</strong></a></li>
</ul>
<p><strong>Definitions (italicized words):</strong> </p>
<p><em>Habitat</em>: the natural conditions and environment in which a plant or animal lives</p>
<p><br />
<em>Extermination</em>: completely destroy or kill</p>
<p><em>USFWS</em>: United States Fish and Wildlife Service</p>
<!-- end .sidebar1 --></div>
<div class="content">
<h1>Yellowstone Biologist </h1>
<h2>Mammals</h2>
<p> Yellowstone is home to the largest concentration of mammals in the lower 48 states. Sixty-seven different mammals live here, including grizzly bears, black bears, gray wolves, wolverine, lynx, elk, bison, moose, and numerous small mammals.</p>
<p>Visitors must view all wildlife safely. You must stay at least 100 yards away from bears and wolves and at least 25 yards away from all other animals—including bison, elk, bighorn sheep, deer, moose, and coyotes.</p>
<h4>Bears</h4><img src="grizzly.gif" alt="grizzly bear family" width="150" height="115" hspace="15" vspace="15" align="left" />
<p>Bears may be seen in Yellowstone March through November of each year. Yellowstone is one of the only areas south of Canada that still has large grizzly bears. Grizzly bears are usually seen in the open areas. </p>
<p> </p>
<h4>Wolves</h4><img src="wolves.gif" alt="wolves" width="150" height="115" hspace="15" vspace="15" align="left" />
<p>
Loss of <em>habitat</em> and <em>extermination</em> programs led to the elimination of wolves throughout most of the United States by early in the 20th century. In 1973, the U.S. Fish and Wildlife Service listed the northern Rocky Mountain wolf as an endangered species and designated Greater Yellowstone as one of three recovery areas. From 1995 to 1997, 41 wild wolves from Canada and northwest Montana were released in Yellowstone National Park. As expected, wolves from the growing population dispersed to establish territories outside the park. More than 1,600 wolves now reside in Idaho, Montana, and Wyoming. In August 2010, a U.S. district judge ruled against a <em>USFWS</em> 2009 decision to remove the wolf from the endangered species list, so wolves are protected as an endangered species in all three states again.<br />
</p>
<h4>Bighorn Sheep<img src="BigHornSheep.gif" alt="bighorn sheep" width="150" height="115" hspace="15" vspace="15" align="left" /></h4>
<p> Bighorn sheep once numbered in the millions in western United States and were an important food source for humans. They are named for the large, curved horns on the males, or rams. Females, or ewes, also have horns, but they are short with only a slight curve. In the winter of 1981-82, an outbreak of pinkeye occurred among bighorns in the Mt. Everts area. Many sheep were blinded and/or killed on the adjacent park road or by falling from cliffs. Some are now found comfortable around summer road traffic.</p>
<h4>Bison<img src="bison.gif" alt="bison" width="150" height="115" hspace="15" vspace="15" align="left" /></h4><p>
Bison are the largest mammals in Yellowstone National Park. They are strictly vegetarian, and they graze on grasslands in the meadows, the foothills, and even the high-elevation areas of Yellowstone. Despite their slow walk, bison are surprisingly fast for animals that weigh more than half a ton.</p>
<p>Yellowstone is the only place in the lower 48 states where a population of wild bison has survived since prehistoric times, although fewer than 50 native bison remained here in 1902. Fearing extinction, the park imported 21 bison from two privately-owned herds.</p>
<h4>Bobcats<img src="yellowstone-bobcat.gif" alt="bobcat" width="150" height="115" hspace="15" vspace="15" align="left" /></h4><p>
Bobcats are small wild cats with reddish-brown or yellowish-brown coats, streaked with black or dark brown. They have prominent, pointed ears with a tuft of black hair at the tip. </p>
<p>Unlike lynx, which they resemble, bobcats elsewhere have been highly adaptable to human-caused changes in environmental conditions; some biologists believe that there are more bobcats in the United States today than in colonial times. Yellowstone has many rock outcrops, canyons bordered by rock ledges, conifer forests, and semi-open areas that seem to offer conditions favorable for bobcats--adequate shelter, a variety of rodents, rabbits, hares, birds, and other small animals as well as seasonal carrion, for food.</p>
<p>Bobcats are known to hole-up and wait out severe winter storms elsewhere. These elusive cats are most active at night, so even those who study them seldom have an opportunity to see one.</p>
<h4>Coyotes</h4>
<p>
Yellowstone's coyotes are among the largest coyotes in the United States. Adults are about 30 pounds, are less than two feet tall and vary in color from gray to tan with sometimes a reddish tint to its coat.</p>
<p>Small mammals are an important component of coyotes' diets. In Yellowstone, such prey include microtines or voles, mice , pocket gophers, small birds, and in spring and summer, ground squirrels. They also feed on larger mammal's (elk, deer, bison, moose, pronghorn, and bighorn sheep) calves and fawns shortly after birth and young animals.</p>
<h4>Elk<img src="elk.gif" alt="elk" width="150" height="115" hspace="15" vspace="15" align="left" /></h4><p>
Elk are the most abundant large mammal found in Yellowstone and historical evidence confirms their continuous presence for at least 1,000 years. More than 30,000 elk from 7-8 different herds summer in Yellowstone and approximately 15,000 to 22,000 winter in the park. </p>
<p>Bulls grow antlers annually from the time they are nearly one year old. When mature, a bull's "rack" may have 6 to 8 points, or tines, on each side and weigh more than 30 pounds.</p>
<h4>Lynx</h4>
<p>Adult lynx are about the size of a large domestic cat. Males can weigh up to 30 pounds, while females are smaller. The similarity between lynx and bobcats makes it difficult to determine their status in Yellowstone. A large adult bobcat may be larger than a small adult lynx, so size is not a good characteristic for positive identification.</p>
<h4>Moose<img src="moose.gif" alt="moose" width="150" height="115" hspace="15" vspace="15" align="left" /></h4><p>
Moose, the largest member of the deer family, were reportedly very rare in northwest Wyoming when Yellowstone National Park was established in 1872. Moose breed from early September to November and one to three calves are born in May or June. Calves weigh 25 to 35 pounds at birth but grow rapidly; adult females (cows) weigh up to 800 pounds and males (bulls) up to 1300 pounds. </p>
<h4>Mountain Lion</h4><p>
The mountain lion, also called the cougar, is the largest member of the cat family living in Yellowstone. Mountain lions can weigh up to 200 pounds, although lions in Yellowstone are thought to range between 140 and 160 pounds for males and around 100 pounds for females.</p>
<p>Mountain lions are rather secretive, so most visitors are unaware of their existence in Yellowstone. Lions probably live throughout the park in summer. </p>
<h4> Amphibians</h4>
<p>
Cool, dry conditions limit Yellowstone's amphibians to four species: boreal toad; chorus frog; spotted frog; and the tiger salamander. Population numbers for these are not known.</p>
<!-- end .content --></div>
<div class="footer">
<p>Sources: <a href="http://www.nps.gov/yell/naturescience/mammals.htm">http://www.nps.gov/yell/naturescience/m ammals.htm</a></p>
<p><a href="http://www.nps.gov/yell/naturescience/amphibians.htm">http://www.nps.gov/yell/naturescienc e/amphibians.htm</a></p>
<!-- end .footer --></div>
<!-- end .container --></div>
</body>
</html>
This has happened before, where everything in my content area has dropped down below the sidebar.It's happended on several pages. I don't know why or how to fix it. It's for a class, so where I've posted it is private, but here's the page and css code.
HTMLMurray is right. Padding (and margins) is added to the width. However, when using percentages, you should never use figures that add up to exactly 100%.
Browsers need to convert the percentages to pixels. Because pixels must be whole numbers, some percentages are rounded up, which results in the final element dropping down below its neighbours. With percentages, it's much safer to use values that add up to 98% (99% often works, but 98% is safer). -
Does anyone know how to win a fight with layout manager?
I am using the form designer in netBeans to design my page, which has a jPanel on the left and a number of controls on the right.
My problem is that when I eventually get it to look half right at design time, it looks different at run time. The fonts are different, the combo boxes are a different height and some of my text boxes are 4 times as wide. http://RPSeaman.googlepages.com/layout.GIF shows both the design-time view and the run-time view. How can I win my fight with layout manager?I'd like to do an experiment where you take say 20 pairs of students of java, with each pair matched in terms of prior programming and java experience, general knowledge, etc... and set one of each pair to learn Swing using netbeans and its layout generator with the other pair learning to code Swing by hand. Then 6 months later compare their abilities. I'll bet that the code by hand group will blow the other group out of the water in terms of understanding and ability.
Just my 2 Sheckel's worth. -
Hullo - I've written a little app that, because of the nature of what it does, prettymuch requires the use of null layout. It works well enough, but there are a few points where it does strange things that I don't understand. I haven't been able to find any good docs anywhere for how exactly layout/rendering works. The Swing tutorial, for example, almost completely ignores the topic.
Basically, I set the layout to null, add my components, use setBounds...but then nothing happens. In order for anything to be visible, I have to call pack() before I call show(). What is pack? What does it do? How can Sun's null layout examples work even though most of them don't use it?
Second, if I create JFrame of a certain size, and add a component that goes off the bottom of the JFrame (on purpose), then expand the size of the JFrame to reveal the bottom part of that component, it doesn't paint - there's just a grey area. No amount of repaint() pack() or anything will cause it to show. The only way I've found to do it is to make the JFrame larger to begin with, add the component so that it's visible, then resize to the smaller size, which is kind of ugly and clunky.
I basically do not understand why Swing is doing the things it does; why it paints sometimes and not other times, where it paints, when it paints, where it shows objects, how it packs them, etc. I would be very grateful if someone could englighten me!Hullo - I've written a little app that, because of the
nature of what it does, prettymuch requires the use of
null layout. It works well enough, but there are a
few points where it does strange things that I don't
understand. I haven't been able to find any good docs
anywhere for how exactly layout/rendering works. The
Swing tutorial, for example, almost completely ignores
the topic.
Basically, I set the layout to null, add my
components, use setBounds...but then nothing happens.
In order for anything to be visible, I have to call
pack() before I call show(). What is pack? What
does it do? How can Sun's null layout examples work
even though most of them don't use it?
Second, if I create JFrame of a certain size, and add
a component that goes off the bottom of the JFrame (on
purpose), then expand the size of the JFrame to reveal
the bottom part of that component, it doesn't paint -
there's just a grey area. No amount of repaint()
pack() or anything will cause it to show. The only
way I've found to do it is to make the JFrame larger
to begin with, add the component so that it's visible,
then resize to the smaller size, which is kind of ugly
and clunky.
I basically do not understand why Swing is doing the
things it does; why it paints sometimes and not other
times, where it paints, when it paints, where it shows
objects, how it packs them, etc. I would be very
grateful if someone could englighten me!Okay, I think you should call setVisible(true); instead of pack then show. Pack basically organizes the components so they take up the least amount of room, and then it shrinks the frame to as small as it will go without hiding any components. It think if you call revalidate() instead of repaint(), should solve your problem.
The other thing to do, is (hehe) make your own components -
I really want more options for page layouts.
I am enjoying iphoto11, but sometimes wish for more page layout options. Is it possible to flip an entire page layout - like the option to flip a photo? I am currently working with a Photo Essay theme and in most of the layouts the text box is on the same side of the page. When I preview the book I see that I have many parallel layouts which looks a little stiff. Any ideas?
1 - there is no option to add layouts or modify existing layouts - suggest to Apple - iPhoto menu ==> provide iPhoto feedback
2 - I understand that Aperture offers this capability
3 - you can do pages in any program you want and do a print to PDF using the send PDF to iPhoto option and then use that image as a full page photo in a book - see Old Toad's tutorial #19 for more info
LN -
ABAP Dump while Changing the Layout fields in Report output - RCOPCA02
Hi,
I Copied the Standard Program RCOPCA02 to ZRCOPCA02. I added two new fields(AUART, AUGRU) in the report output. It is executing correctly with default layout, While Changing the layout for displaying new fields it is dumping.
I am not understanding, What should i do...
Here is the Code.
report ZRCOPCA02 no standard page heading message-id km
line-count (2) line-size 81.
type-pools: slis, ecarc.
DDIC-Tabellen *******************************************************
tables: glpca, "Einzelposten / Ist
glu1, "Übergabestruktur FI-SL-Anzeige
t000,
tka01,
sscrfields,
vbak.
Variablen und int. Tabellen *****************************************
data: l_vbeln like vbak-vbeln,
l_auart like vbak-auart,
l_augru like vbak-augru.
data: afield type slis_fieldcat_alv,
sp_group type slis_sp_group_alv,
t_listheader type slis_t_listheader with header line,
t_layout type slis_layout_alv,
t_fieldcat type slis_t_fieldcat_alv,
t_spec_groups type slis_t_sp_group_alv,
event type slis_alv_event,
t_events type slis_t_event,
g_variant like disvariant,
gx_variant like disvariant,
g_exit(1) type c,
g_save(1) type c,
g_repid like sy-repid,
msgtyp like sy-msgty,
lt_dynpread like dynpread occurs 1 with header line,
ls_rpcak like rpcak, "note 0310592
packsize type i value 1000,
text1(60) type c,
text2(60) type c,
oldkokrs like glpca-kokrs,
oldracct like glpca-racct.
data: whr_size type i value 50,"Maximum of single values per MIC 46a
"charact. in the where-clause of the select-statement
lines type i, "number of lines of range table MIC 46a
cnt_rldnr type i, "Zähler Anzahl selektierter Ledger
cnt_kokrs type i, "Zähler Anzahl selektierter KoReKreise
cnt_poper type i, "Zähler Anzahl selektierter Perioden
cnt_ryear type i, "Zähler Anzahl selektierter GeschJahre
cnt_rvers type i, "Zähler Anzahl selektierter Versionen
cnt_bukrs type i, "Zähler Anzahl selektierter BuKreise
empge like dkobr-empge,
ksl_curr like tka01-pcacur,
hsl_curr like t001-waers,
a_rec like rstirec.
data: begin of dim_data.
include structure rgcdi. "data for dimensions
data: end of dim_data.
data: begin of tab_fields occurs 80,
name like dntab-fieldname, "fields in table i_glpca
end of tab_fields.
data: begin of i_glpca occurs 0.
include structure rpca2.
data: racct_ktext like rpcak-ktext,
psppp like prps-posid,
v_auart like vbak-auart,
v_augru like vbak-augru,
end of i_glpca.
data: rw_subrc like sy-subrc, "Flag: Report-Writer-Schnittstelle
re_subrc like sy-subrc, "Flag: Recherche-Schnittstelle
subrc like sy-subrc.
data: set_id like sethier-setid, "Set-ID "RDI_SETS_4.0
set_class like sethier-setclass, "Setklasse "RDI_SETS_4.0
set_sname like sethier-shortname."Setname (24) "RDI_SETS_4.0
data: authorised(1),
s_message(1),
auth_dbcount like sy-tabix,
Hex-Konstanten für Minimum/Maximum-Werte
begin of hex00,
x1(12) type c,
x2(12) type c,
end of hex00,
begin of hexff,
x1(12) type c,
x2(12) type c,
end of hexff.
ranges rclnt for glpca-rclnt.
field-symbols: type ecarc_glpca_curr.
Selektionsoptionen *************************************************
select-options:
rldnr for glpca-rldnr default '8A' no-display,
rassc for glpca-rassc no-display,
rrcty for glpca-rrcty default 0,
rrcty for glpca-rrcty,
rvers for glpca-rvers default '000',
kokrs for glpca-kokrs memory id cac,
bukrs for glpca-rbukrs memory id buk,
poper for glpca-poper default sy-datlo+4(2),
ryear for glpca-ryear default sy-datlo,
poper for glpca-poper,
ryear for glpca-ryear,
prctr for glpca-rprctr matchcode object prct,
pprctr for glpca-sprctr matchcode object prct,
RACCT FOR GLPCA-RACCT MATCHCODE OBJECT KART, "RD_P30K128304
racct for glpca-racct, "RD_P30K128304
drcrk for glpca-drcrk,
activ for glpca-activ,
rhoart for glpca-rhoart,
rfarea for glpca-rfarea,
stagr for glpca-stagr,
rtcur for glpca-rtcur,
runit for glpca-runit,
versa for glpca-versa no-display,
eprctr for glpca-eprctr no-display,
afabe for glpca-afabe no-display,
rmvct for glpca-rmvct no-display,
hrkft for glpca-hrkft no-display, "note 550972
sbukrs for glpca-sbukrs no-display, "note 550972
shoart for glpca-shoart no-display, "note 550972
sfarea for glpca-sfarea no-display, "note 550972
docct for glpca-docct,
docnr for glpca-docnr,
refdocct for glpca-refdocct,
refdocnr for glpca-refdocnr,
werks for glpca-werks,
repmatnr for glpca-rep_matnr matchcode object pca_shlp_rep_matnr,
rscope for glpca-rscope.
parameters: no_rrint no-display default ' '." skip "MICP40K066037
" report-report-interface
display variant ">>MICP40K039857
selection-screen begin of block 0 with frame title text-e01.
parameters: p_vari like disvariant-variant.
selection-screen comment 47(40) varname for field p_vari.
selection-screen end of block 0.
parameters log_grp(4) type c no-display default 'KE5Z'.
"<<MICP40K039857
ranges: v_racct for glpca-racct,
v_prctr for glpca-rprctr,
v_pprctr for glpca-sprctr.
Tabelle mit Werten aus den Berichts-Set vom Report-Writer *
data begin of val_tab occurs 50.
include structure rgciv.
data end of val_tab.
MICP30K166368
feldkatalog und interface für bb-schnittstelle rw MICP30K166368
MICP30K166368
"MICP30K166368
data begin of bbs_fieldtab occurs 20. "MICP30K166368
include structure rstifields. "MICP30K166368
data end of bbs_fieldtab. "MICP30K166368
archiv
type-pools: rsds.
types: begin of ty_archive_objects,
object like arch_obj-object,
end of ty_archive_objects,
ty_t_archive_objects type ty_archive_objects occurs 2.
constants: lc_set type c value 'X',
lc_report type progname value 'KE5Z',
lc_reporttype type reporttype value 'TR'.
tables: admi_files.
select-options lr_files for admi_files-archiv_key no-display.
parameter: read_db type c default 'X' no-display,
read_ar type c no-display,
arc_obj like arch_obj-object no-display,
read_as type c default 'X' no-display.
data : lt_arch_obj type ty_t_archive_objects with header line,
ls_selections type rsds_frange,
lt_selections type rsds_frange_t,
ls_selopt type rsdsselopt,
lt_glpca_archiv type ecarc_t_glpca_curr.
*********************************************************>>MICP40K039857
INITIALIZATION
initialization.
Diverse Initialisierungen
perform init_vars.
g_repid = sy-repid.
Set default values for record type
rrcty-sign = 'I'.
rrcty-option = 'EQ'.
rrcty-low = '0'.
append rrcty.
rrcty-low = '2'.
append rrcty.
Set default values for period and year (if kokrs or bukrs is known)
get parameter id 'BUK' field bukrs-low.
get parameter id 'CAC' field kokrs-low.
if kokrs-low is initial "get contr. area from company code
and not bukrs-low is initial.
call function 'KOKRS_GET_FROM_BUKRS'
exporting
i_bukrs = bukrs-low
importing
e_kokrs = kokrs-low
exceptions
no_kokrs_found = 1
others = 2.
if sy-subrc <> 0.
clear kokrs-low.
endif.
endif.
if not kokrs-low is initial.
call function 'K_KOKRS_READ' "get fiscal year variant
exporting
kokrs = kokrs-low
importing
e_tka01 = tka01
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
call function 'G_PERIOD_GET'
exporting
date = sy-datlo
variant = tka01-lmona
importing
period = poper-low
year = ryear-low
exceptions
ledger_not_assigned_to_company = 1
period_not_defined = 2
variant_not_defined = 3
others = 4.
if sy-subrc = 0.
poper-sign = 'I'.
poper-option = 'EQ'.
append poper.
ryear-sign = 'I'.
ryear-option = 'EQ'.
append ryear.
endif.
endif.
endif.
Settings for display variants
g_save = 'A'. "Schalter Varianten benutz./allg. speichern
clear g_variant.
g_variant-report = g_repid.
g_variant-log_group = log_grp.
g_variant-username = sy-uname.
Get default variant
gx_variant = g_variant.
call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
exporting
i_save = g_save
changing
cs_variant = gx_variant
exceptions
not_found = 2.
if sy-subrc = 0.
p_vari = gx_variant-variant.
endif.
Set variant
if p_vari is initial.
p_vari = '1SAP'.
move p_vari to gx_variant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = g_save
changing
cs_variant = gx_variant
exceptions
not_found = 1.
if sy-subrc ne 0.
clear p_vari.
clear gx_variant-variant.
endif.
endif.
varname = gx_variant-text.
"<<MICP40K039857
archiv
call function 'KARL_DATA_INPUT_INIT'
exporting
i_report = lc_report
i_reporttype = lc_reporttype
importing
e_xusedb = read_db
e_xusear = read_ar
e_archobj = arc_obj
e_infosys = read_as
tables
t_arch_sel = lr_files.
data: lt_excluding like sy-ucomm occurs 0 with header line.
call function 'RS_SET_SELSCREEN_STATUS'
exporting
p_status = 'SELSCREEN'
p_program = 'RCOPCA02'
tables
p_exclude = lt_excluding.
Initialisieren der Bericht/Bericht-Schnittstellen *
data: ld_no_rrint type boole_d. "note 490484 begin
import rri = ld_no_rrint from memory id 'RCOPCA02_NO_RRI'.
if ld_no_rrint = 'X'.
free memory id 'RCOPCA02_NO_RRI'.
else. "note 490484 end
call function 'G_REPORT_INTERFACE_INIT' "Report-Writer?
exporting "MICP30K166368
table = 'GLPCT' "MICP30K166368
importing
subrc = rw_subrc "MICP30K166368
tables "MICP30K166368
it_fieldr = bbs_fieldtab. "MICP30K166368
call function 'RSTI_APPL_STACK_POP'"oder Recherche?
importing
i_rec = a_rec
exceptions
appl_stack_not_initialized = 1.
re_subrc = sy-subrc.
if re_subrc = 0.
check Receiver is this report
if not ( ( a_rec-rtool = 'RT' and a_rec-ronam = 'RCOPCA02' )
or ( a_rec-rtool = 'TR' and a_rec-ronam = 'KE5Z' ) ) .
re_subrc = 2.
endif.
endif.
endif.
AT SELCTION-SCREEN on value request**********************************
*at selection-screen on value-request for racct-low. "RD "4.6a
"RD "4.6a
call function 'K_RACCT_VALUE_REQUEST' "RD "4.6a
importing "RD "4.6a
e_racct = racct-low. "RD "4.6a
"RD "4.6a
"RD "4.6a
*at selection-screen on value-request for racct-high. "RD "4.6a
"RD "4.6a
call function 'K_RACCT_VALUE_REQUEST' "RD "4.6a
importing "RD "4.6a
e_racct = racct-high. "RD "4.6a
at selection-screen on value-request for p_vari. "MICP40K039857
perform f4_for_variant. "MICP40K039857
at selection-screen on value-request for poper-low. "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
end of insertion note 522715
call function 'ECPCA_RPMAX_VALUE_REQUEST' "RD "4.6a
exporting "RD "4.6a
i_kokrs = kokrs-low "RD "4.6a
i_ryear = ryear-low "RD "4.6a
importing "RD "4.6a
e_rpmax = poper-low "RD "4.6a
begin of insertion note 522715
exceptions
table_empty = 1.
endif.
end of insertion note 522715
at selection-screen on value-request for poper-high. "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
end of insertion note 522715
call function 'ECPCA_RPMAX_VALUE_REQUEST' "RD "4.6a
exporting "RD "4.6a
i_kokrs = kokrs-low "RD "4.6a
i_ryear = ryear-low "RD "4.6a
importing "RD "4.6a
e_rpmax = poper-high "RD "4.6a
begin of insertion note 522715
exceptions
table_empty = 1.
endif.
end of insertion note 522715
AT SELCTION-SCREEN ***************************************************
at selection-screen.
perform pai_of_selection_screen.
begin of insertion note 522715
if not kokrs-low is initial.
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc <> 0.
message e101(ki) with kokrs-low.
endif.
endif.
end of insertion note 522715
archiv
if sy-ucomm = 'FC01' or sy-ucomm = 'UCDS'
or sy-ucomm = 'ONLI' and read_ar = 'X'
and read_as is initial and lr_files[] is initial.
if lt_arch_obj[] is initial.
lt_arch_obj-object = 'PCA_OBJECT'. append lt_arch_obj.
lt_arch_obj-object = 'EC_PCA_ITM'. append lt_arch_obj.
endif.
call function 'KARL_DATA_INPUT_SELECT'
exporting
i_db_and_arc = lc_set
i_infosys_possible = lc_set
i_object_fixed = 'V'
i_documentation = 'KARL_DATA_INPUT_SEL_KE5YZ'
i_report = lc_report
i_reporttype = lc_reporttype
tables
t_objects = lt_arch_obj
t_arch_sel = lr_files
changing
c_xusedb = read_db
c_xusear = read_ar
c_archobj = arc_obj
c_infosys = read_as.
endif.
START-OF-SELECTION **************************************************
start-of-selection.
Default-Werte löschen, falls Aufruf über Recherche
oder Report-Writer erfolgt ist
if no_rrint is initial and ld_no_rrint is initial. "note 490484
if rw_subrc eq 0 or re_subrc eq 0.
refresh: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
versa, afabe, eprctr,
v_racct, v_prctr, v_pprctr.
clear: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
versa, afabe, eprctr,
v_racct, v_prctr, v_pprctr.
endif.
Parameter einlesen über Report-Writer-Schnittstelle *
if rw_subrc eq 0.
perform rw_get_parameters.
oder Parameter einlesen über Recherche-Schnittstelle *
elseif re_subrc eq 0.
perform re_get_parameters.
endif.
endif.
if read_db = 'X'. " read from DB (archiv)
Bewegungsdaten einlesen und puffern...................................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten selektieren'(p10).
Use dirty trick to mislead DB-optimizer
call function 'DB_DO_NOT_USE_CLIENT_INDEX'
exporting
value = sy-mandt
tables
mandttab = rclnt.
select (tab_fields) from glpca
client specified
package size packsize
APPENDING CORRESPONDING FIELDS OF TABLE i_glpcaO
into corresponding fields of table i_glpca
where rldnr in rldnr
and rrcty in rrcty
and rvers in rvers
and kokrs in kokrs
and rbukrs in bukrs
and ryear in ryear
and rassc in rassc
and hrkft in hrkft "note 550972
and sbukrs in sbukrs "note 550972
and shoart in shoart "note 550972
and sfarea in sfarea "note 550972
and racct in racct
and rprctr in prctr
and sprctr in pprctr
and poper in poper
and drcrk in drcrk
and activ in activ
and rhoart in rhoart
and rfarea in rfarea
and versa in versa
and eprctr in eprctr
and afabe in afabe
and rmvct in rmvct
and docct in docct
and docnr in docnr
and stagr in stagr
and rtcur in rtcur
and runit in runit
and refdocct in refdocct
and refdocnr in refdocnr
and werks in werks
and rep_matnr in repmatnr "RDIP40K020663
and rscope in rscope "RDIP40K020663
and rclnt in rclnt. "dirty trick to mislead DB-optimizer
if sy-dbcnt > 1.
text1 = sy-dbcnt.
condense text1.
concatenate text1 text-m01 into text2 separated by space.
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = text2. " ... Datensätze gelesen
endif.
endselect.
Entfernt nicht zugehörige Einträge....................................
loop at i_glpca where ( not rprctr in v_prctr )
or ( not sprctr in v_pprctr )
or ( not racct in v_racct ).
delete i_glpca.
endloop.
endif.
*archiv
if read_ar = 'X' and not
( read_as is initial and lr_files[] is initial ).
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Lesen im Archiv'(p12).
define fill_lt_selections.
if not &2[] is initial.
clear ls_selections.
move &1 to ls_selections-fieldname.
loop at &2.
clear ls_selopt.
move-corresponding &2 to ls_selopt.
append ls_selopt to ls_selections-selopt_t.
endloop.
append ls_selections to lt_selections.
endif.
end-of-definition.
fill_lt_selections 'RLDNR' rldnr.
fill_lt_selections 'RRCTY' rrcty.
fill_lt_selections 'RVERS' rvers.
fill_lt_selections 'KOKRS' kokrs.
fill_lt_selections 'RBUKRS' bukrs.
fill_lt_selections 'POPER' poper.
fill_lt_selections 'RYEAR' ryear.
fill_lt_selections 'RPRCTR' prctr.
fill_lt_selections 'SPRCTR' pprctr.
fill_lt_selections 'RACCT' racct.
fill_lt_selections 'DRCRK' drcrk.
fill_lt_selections 'ACTIV' activ.
fill_lt_selections 'RHOART' rhoart.
fill_lt_selections 'RFAREA' rfarea. "note 401961
fill_lt_selections 'STAGR' stagr.
fill_lt_selections 'RTCUR' rtcur.
fill_lt_selections 'RUNIT' runit.
fill_lt_selections 'VERSA' versa.
fill_lt_selections 'EPRCTR' eprctr.
fill_lt_selections 'AFABE' afabe.
fill_lt_selections 'RMVCT' rmvct.
fill_lt_selections 'DOCCT' docct.
fill_lt_selections 'DOCNR' docnr.
fill_lt_selections 'REFDOCCT' refdocct.
fill_lt_selections 'REFDOCNR' refdocnr.
fill_lt_selections 'WERKS' werks.
fill_lt_selections 'REP_MATNR' repmatnr.
fill_lt_selections 'RSCOPE' rscope.
fill_lt_selections 'HRKFT' hrkft. "note 550972
fill_lt_selections 'SBUKRS' sbukrs. "note 550972
fill_lt_selections 'SHOART' shoart. "note 550972
fill_lt_selections 'SFAREA' sfarea. "note 550972
call function 'EC_PCA_SELECT_FROM_ARCHIVE'
exporting
i_selections = lt_selections[]
i_files_sequential_read = lr_files[]
importing
e_glpca = lt_glpca_archiv[]
exceptions
no_infostruc_found = 1.
if sy-subrc = 1.
message id sy-msgid type 'I' number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_glpca.
loop at lt_glpca_archiv assigning to i_glpca.
append i_glpca.
endloop.
endif.
if i_glpca[] is initial. "Info,nichts gefunden
message s000.
exit.
endif.
get texts for accounts ...............................................
sort i_glpca by kokrs racct.
loop at i_glpca assigning -racct_ktext = ls_rpcak-ktext.
endloop.
Liste mit Einzelposten geeignet sortieren.............................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten sortieren'(p30).
if show_ref is initial.
sort i_glpca by rldnr ryear rbukrs rrcty rvers
docct docnr docln.
else.
sort i_glpca by rldnr kokrs ryear rbukrs rrcty rvers poper
refdocct refdocnr refdocln.
endif.
Berechtigungsprüfung und gemerkte Belege aufbereiten .................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Berechtigungsprüfungen'(p40).
clear: cnt_rldnr, cnt_kokrs, cnt_ryear, cnt_rvers, cnt_bukrs.
loop at i_glpca assigning .
Berechtigungscheck
perform check_repo_authority changing authorised.
if authorised is initial.
delete i_glpca.
s_message = 'X'.
zählen der Sätze ohne Berechtigung
auth_dbcount = auth_dbcount + 1.
else. "Weitere Bearbeitung nur für berechtigte Belege...
Zusätzlich merken der Anzahl der Ausprägungen
bestimmter Dimensionen
on change of -rbukrs
ct = '10'
importing
currency = hsl_curr.
endon.
externe Immobilienbezeichnung "ww/kb
on change of i_glpca-imkey.
if ( not -dabrz
I_length = 20
importing
e_empge = -konty.
endif.
CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
endif.
endon.
on change of i_glpca-dabrz.
call function 'REMD_IMKEY_TO_EMPGE'
exporting
i_imkey = i_glpca-imkey
i_dabrz = i_glpca-dabrz
i_length = 20
importing
e_empge = i_glpca-empge
e_konty = i_glpca-konty.
CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
endon.
Konvertierungsproblem mit PSP-Nummer bereinigen
if not -psppp.
endif.
endif.
Währungen in Hilfsfeldern speichern
if -ksl_curr = ksl_curr.
endif.
modify i_glpca.
endif.
endloop.
Nachricht, wenn nicht alle Einzelposten angezeigt werden.
if not s_message is initial.
message s407(km) with auth_dbcount.
endif.
EP ausgeben...........................................................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten ausgeben'(p50).
t_layout-detail_initial_lines = 'X'.
t_layout-detail_popup = 'X'.
t_layout-f2code = 'PIC1'. "MICP40K039857
t_layout-get_selinfos = 'X'.
t_layout-group_change_edit = 'X'. "note 576149
perform fill_listheader.
perform fieldcat_fill.
perform spec_groups_fill.
perform events_fill. "MICP40K039857
">>MICP40K039857
call function 'K_KKB_LIST_DISPLAY'
exporting
i_callback_program = 'RCOPCA02'
i_callback_user_command = 'USR_CMD'
i_callback_top_of_page = 'TOP_OF_PAGE'
I_CALLBACK_END_OF_PAGE =
I_CALLBACK_END_OF_LIST =
i_callback_pf_status_set = 'SET_PF_STATUS'
I_CALLBACK_LAYOUT_SAVE =
I_CALLBACK_FIELDCAT_SAVE =
i_tabname = 'I_GLPCA'
is_layout = t_layout
it_fieldcat = t_fieldcat
I_FCTYPE = 'R'
IT_EXCLUDING =
it_special_groups = t_spec_groups
IT_SORT =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
tables
t_outtab = i_glpca
exceptions
others = 1.
loop at i_glpca.
select single vbeln auart augru
into (l_vbeln, l_auart, l_augru)
from vbak where vbeln = i_glpca-aubel.
if sy-subrc = 0.
move l_auart to i_glpca-v_auart.
move l_augru to i_glpca-v_augru.
modify i_glpca.
endif.
endloop.
call function 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
i_callback_program = 'ZRCOPCA02'
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USR_CMD'
i_structure_name = 'I_GLPCA'
is_layout = t_layout
it_fieldcat = t_fieldcat
IT_EXCLUDING =
it_special_groups = t_spec_groups
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = g_save
is_variant = g_variant
it_events = t_events
IT_EVENT_EXIT =
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = i_glpca
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
"<<MICP40K039857
clear i_glpca.
*& Form CHECK_REPO_AUTHORITY
Check only new auth-object K_PCA *
--> p1 text
<-- p2 text
form check_repo_authority changing authorized like authorised.
fill structure for userexit in K_PCA_RESP_AUTHORITY_CHECK
data: auth like pca_i_auth. "46a MIC check K_PCA and G_GLTP
auth-bukrs = -rrcty.
clear authorized.
check PrCtr/account/activity
call function 'K_PCA_RESP_AUTHORITY_CHECK'
exporting
i_kokrs = -racct
i_vorgn = 'REPP'
i_actvt = '28'
i_auth = auth
i_no_dialog_message = 'X'
exceptions
no_authority = 1
data_missing = 2
others = 3.
if sy-subrc = 0. "ok
check ledger/version/record type
call function 'PCA_G_GLTP_AUTH_CHECK'
exporting
rldnr = -rrcty
exceptions
no_authorisation = 1
others = 2.
if sy-subrc = 0. "ok, User is authorized
authorized = 'X'.
endif.
endif.
endform. " CHECK_REPO_AUTHORITY
*& Form INIT_VARS
Initialisieren diverser Hilfsvariablen und -tabellen *
form init_vars.
data begin of nametab occurs 80. "Tabelle mit Feldern aus der RPCA2
include structure dntab.
data end of nametab.
select single * from t000
client specified
where mandt = sy-mandt.
refresh nametab.
call function 'NAMETAB_GET'
exporting
only = 'T'
tabname = 'RPCA2'
tables
nametab = nametab.
Übernehmen der Feldnamen, die auch in der GLPCA
vorkommen.
loop at nametab where fieldname ne 'KSL_CURR'
and fieldname ne 'HSL_CURR'
and fieldname ne 'EMPGE' "ww/kb
and fieldname ne 'KONTY'. "ww/kb
move nametab-fieldname to tab_fields-name.
append tab_fields.
endloop.
fill Fields of receiver for BBS "MIC46C
call function 'RSTI_REPORT_FIELDS_FIND'
exporting
e_repid = 'RCOPCA02'
e_type = 'R'
tables
it_fields = bbs_fieldtab.
correct fieldnames
read table bbs_fieldtab with key rfield = 'PRCTR'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'RPRCTR'.
modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'PPRCTR'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'SPRCTR'.
modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'BUKRS'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'RBUKRS'.
modify bbs_fieldtab index sy-tabix.
endif.
Unicode
class cl_abap_char_utilities definition load.
clear hex00 with cl_abap_char_utilities=>minchar.
clear hexff with cl_abap_char_utilities=>maxchar.
endform. " INIT_VARS
FORM FILL_LISTHEADER *
List-Header in Abhängigkeit der selektierten Daten *
form fill_listheader.
read table i_glpca index 1.
if sy-subrc ne 0.
exit.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Ledger '(h01).
if cnt_rldnr <= 1.
t_listheader-info = i_glpca-rldnr.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Kostenrechnungskreis'(h02).
if cnt_kokrs <= 1.
t_listheader-info = i_glpca-kokrs.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungskreis '(h03).
if cnt_bukrs <= 1.
t_listheader-info = i_glpca-rbukrs.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungsperiode '(h04).
if cnt_poper <= 1.
t_listheader-info = i_glpca-poper.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
if cnt_ryear <= 1.
t_listheader-typ = 'S'.
t_listheader-key = 'Geschäftsjahr '(h05).
t_listheader-info = i_glpca-ryear.
append t_listheader.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Version '(h06).
if cnt_rvers <= 1.
t_listheader-info = i_glpca-rvers.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
endform. "fill_listheader
*& Form FIELDCAT_FILL
*& Aufbau des Feldkataloges für den K_KKB_LIST_DISPLAY, *
*& bzw REUSE_ALV_LIST_DISPLAY, *
*& weitere Infos enthält die FktBaustein-Doku *
form fieldcat_fill.
data: i type i value 0.
refresh t_fieldcat.
Ledger
if cnt_rldnr > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RLDNR'.
afield-no_sum = 'X'.
afield-no_out = 'X'.
afield-key = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Satzart
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RRCTY'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
Version
if cnt_rvers > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RVERS'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Periode
if cnt_poper > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'POPER'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Geschäftsjahr
if cnt_ryear > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RYEAR'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Referenzbelegtyp
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'REFDOCCT'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel = 'X'.
afield-no_sum = 'X'.
afield-sp_group = '2'.
afield-seltext_s = 'Typ'(t01).
afield-seltext_m = 'Belegtyp'(t02).
afield-seltext_l = 'Ref.Belegtyp'(t03).
afield-outputlen = 3. "Platz für die Sterne der Zwischensummen
if not show_ref is initial.
afield-key = 'X'.
else.
afield-no_out = 'X'.
endif.
append afield to t_fieldcat.
Referenzbelegnummer
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'REFDOCNR'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel = 'X'.
afield-no_sum = 'X'.
afield-sp_group = '2'.
afield-seltext_s = 'Refbeleg'(t04).
afield-seltext_m = 'Refbelegnr'(t05).
afield-seltext_l = 'Ref.Belegnummer'(t06).
if not show_ref is initial.
afield-key = 'X'.
else.
afield-no_out = 'X'.
endif.
appendHi Prabhu,
You are right, problem is with Field Catalog...
When I use FM 'REUSE_ALV_GRID_DISPLAY' it is dumping...
When i tried with FM 'REUSE_ALV_LIST_DISPLAY' it is working perfectly....
how can i use FM 'REUSE_ALV_GRID_DISPLAY' without dumping????
do i need to pass any thing in FM????
Here is the dump:
Runtime Errors MESSAGE_TYPE_X
Occurred on 12/21/2006 at 01:03:24
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Technical information about the message:
Message classe...... "0K "
Number.............. 000
User, transaction...
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLSLVC "
Screen.............. "SAPLSLVC_FULLSCREEN 0500"
Screen line......... 3
Information on where termination occurred
The termination occurred in the ABAP program "SAPLSLVC " in "LINE_OUT_NEW_2".
The main program was "ZRCOPCA02 ".
The termination occurred in line 918 of the source code of the (Include)
program "LSLVCF01 "
of the source code of program "LSLVCF01 " (when calling the editor 9180).
Source code extract
008880 gs_roid-row_id = rs_row-index * -1.
008890 endif.
008900 gs_roid-sub_row_id = rs_row-rowtype+7(10).
008910 gs_poid-row_id = gs_roid-row_id.
008920 gs_poid-sub_row_id = gs_roid-sub_row_id.
008930 gs_poid-rowtype = rs_row-rowtype.
008940 gs_poid-index = rs_row-index.
008950 insert gs_poid into table rt_poid.
008960 endif.
008970 append gs_roid to rt_roid.
008980
008990 loop at rt_fieldcat assigning <ls_fieldcat> where tech ne 'X' and
009000 no_out ne 'X'.
009010
009020 if gflg_invisible = 'X'.
009030 if <ls_fieldcat>-do_sum is initial.
009040 clear gflg_invisible.
009050 continue.
009060 else.
009070 clear g_col_counter.
009080 clear gflg_invisible.
009090 endif.
009100 endif.
009110
009120 clear gs_lvc_data.
009130 clear g_style.
009140
009150 assign component
009160 <ls_fieldcat>-fieldname of structure rt_data to <g_field>.
009170 if sy-subrc ne 0.
> message x000(0k).
009190 endif.
009200
009210 g_col_counter = g_col_counter + 1.
009220
009230 gs_lvc_data-row_pos = r_row_counter.
009240 gs_lvc_data-col_pos = g_col_counter.
009250 gs_lvc_data-row_id = gs_roid-row_id.
009260 gs_lvc_data-sub_row_id = gs_roid-sub_row_id.
009270
009280 * Endtotal and average
009290 if rs_row-rowtype(1) ca 'T' and <ls_fieldcat>-do_sum = 'C'.
009300 * save the actual grouplevel information
009310 gs_grouplevels = rs_grouplevels.
009320 clear g_lines.
009330
009340 * get number of lines of the collect table
009350 describe table rt_data lines g_lines.
009360 * if there is only one line or the field has no references so
009370 * that only the first line has to be considered
Thanks,
fractal
null -
Viewing Layouts on Remote/Testing Server
This is a beginner question.
I'm trying to view Layouts and/or Content Holders on the Remote/Testing Server out of Dreamweaver so I can edit them independently, but I just get 404 messages.
When I create a new page in BC, I am prompted for a Page Title which subsequently creates a Page URL and File name. The Page URL by default has no extension. The File Name has an extension.
If I view that new page on the Remote Server I get a 404 message. If I edit the Page URL to include the File Name extension, I have no problem on the Remote Server.
Now for example: In File Manager I have the following directory structures:
http://www.MySite.com/_System/ContentHolders/layout.html
http://www.MySite.com/Layouts/SystemMessages/SecureZoneAccessDenied-CA.html
Why is it that I can't view these pages on the Remote Server?
Is BC creating a default URL for these Layout pages that isn't the same as the file name it gives them? or no URL at all?
Thanks,
CamHey there. Those are not pages. They are system generated layouts and for content holders only render when the module issued for that content holderin a pager template.
Ile extensionsyouseefor these are needed to work via FTP and understnd HTML formatting etc.
Zone access denied is a system message and will render when you create a login and enter a incorrect password.
Actual pages do not need agile extension.
Loin into the admins floor around. Look and pages, system layouts and templates, apply templates to pages. get a feel of things there as well to help get abetted understanding.
Also check out the links from the main page oftheseforums to theknowledgebaseto read through things as you need them. -
I need to remove "air." from package name. I'm get a Layout xml error when repackaging android app..
So, i'm doing this on my own app. I made an update for an older app that was build using Native Android. But this time, i used Adobe AIR... The catch is Adobe likes to append a "air." to the front of your package name without asking you. So basically I can't upload my update because it has a new package name is now "air.com.mycompany.myapp" rather than the original "com.mycompany.myapp"
Basically I'm going through this guide..
http://helpx.adobe.com/air/kb/opt-out-air-application-analytics.html
I followed all the steps, made all the adjustments to the androidmanifest.xml like it asks.
But after going along with the above guide, with no issues when i get to the step that says
"Run the following command to create the resource file for the updated AndroidManifest.xml:"
I run this..
"/Users/brybam/Documents/eclipse/android-sdk-mac_x86/platform-tools/aapt" package -f -M AndroidManifest.xml -F resources.arsc -I "/Users/brybam/Documents/eclipse/android-sdk-mac_x86/platforms/android-8/android.jar" -S ./res
But I keep getting the same error regarding the xml files in res/layout
./res/layout/expandable_chooser_row.xml:1: error: Error parsing XML: not well-formed (invalid token)
./res/layout/expandable_multiple_chooser_row.xml:1: error: Error parsing XML: not well-formed (invalid token)
./res/layout/main.xml:1: error: Error parsing XML: not well-formed (invalid token)
./res/layout/multiple_file_selection_panel.xml:1: error: Error parsing XML: not well-formed (invalid token)
./res/layout/ssl_certificate_warning.xml:1: error: Error parsing XML: not well-formed (invalid token)
The guide doesn't say anything about these xml files, and im not sure what to do with these or how to handle them.
If i go into the res/layout folder, and just delete these (i know they're necessary. But i just deleted them as a test, to get through the rest of the guide...)
I was able to get through the rest of the steps in the guide fine, make an apk, and put it on my phone...only to find out the app will crash the moment you try to run it. Probably because i deleted the layout xml files...But i cant get the command i need to run above to accept them!
So, earlier in the guide they have me use thing thing called the "AXMLPrinter2.jar" to make the AndroidManifest.xml readable so i can edit it.
I run something like this:
java -jar "/Users/brybam/Desktop/repackage/AXMLPrinter2.jar" AndroidManifest.xml > AndroidManifest.xml.bk
This makes a new file "AndroidManifest.xml.bk" and i can edit that.
So, I was thinking with all of these layout xml files, maybe I could run this "AXMLPrinter2.jar" on them and then edit them. Because right now if you open them they're not human readable, and its hard for me to work on them if they're not...
I tried this thinking i could do the same thing...
java -jar "/Users/brybam/Desktop/repackage/AXMLPrinter2.jar" main.xml > main.xml.bk
Just get a blank file and a console erorr when trying to use the AXMLPrinter2.jar on the layout xml files...
java.lang.ArrayIndexOutOfBoundsException: 67
at android.content.res.StringBlock.getShort(StringBlock.java:231)
at android.content.res.StringBlock.getString(StringBlock.java:91)
at android.content.res.AXmlResourceParser.getName(AXmlResourceParser.java:140)
at test.AXMLPrinter.main(AXMLPrinter.java:56)
So, I think my whole issue is based around these XML files not being converted to human readable before i try and re-package....
EDIT:::
Ok, so I found a site that talks about the error I'm getting but it's in chinese, and even after translating the page...I'm still not well versed with terminal and this stuff to get it.
It reads:
"Error.
Final conclusion:
In minSdkVersion <= 7, AXMLPrinter2.jar can normally decompile xml file
Greater than 7 can not be normal decompile xml file (AndroidManifest.xml except)
Give way to share a batch decompile xml file:
First, create a *. Txt file
Stresses inside the content authoring
for / r layout%% a in (*. xml) do @ java-jar AXMLPrinter2.jar "%% a" >> "%% a". txt
Then this txt file extension into bat form, and this BAT the file and AXMLPrinter2.jar on the same directory will be decompiled xml into the layout directory
Decompilation results can be generated by executing the bat file multiple xml files."
- http://hi.baidu.com/ghcghc/item/ecbaa1ce997cb225a0b50ac2
Maybe someone with more know-how could explain what they're explaining? I get that he's saying the issue im seeing appears when you're using minSdK <=7 but I need to use minSdk 8. Does anyone understand this work around? And how I might go about it on a Mac with terminal?
I wish adobe would make it easy to remove the "air." from the package name. If they want to convert old Native devs to AIR devs...the transition needs to be seamless. But now I'm about to have to go back to Native because I can't update an app I already have out on the market with an air app.Hello~
I also tried to remove "air." package name in air application. And i encounter the same problem.
I do not find any solution to decode the xml inside res folder by AXMLPrinter2.jar. And those xml inside is compressed which is unreadable.
However, what you can do is copying the structure of res folder. And go to your air sdk file path - adobeair-sdk-folder/lib/android/lib/resources/
Replace those file exists in your res folder. And copy "values" folder to your res folder.
Hope this solve your problem~
Maybe you are looking for
-
How can I remove a tablet device that isn't there?
In one of our test environments we've got an Xserve running OSX 10.5.6, inside is running Server 10.5 in VMWare Fusion. Now, the VM thinks it has a tablet device installed, as is evidenced by the ink tab showing up in system preferences (the host doe
-
Hi All, i have to upload signature in SAP fo purchase order. I try to upload signature in SAP by usnig program RSTXLDMC but it gives me following error. TIFF format error: No baseline TIFF 6.0 file Please help me to find out the solution. Thanks Piy
-
So I'm recording guitar in garageband. Is there a way to fix certain sections within the track? I have an otherwise good track but I noticed a few hiccups here and there. Thanks!
-
Embedded Java Applet NullPointerException in JSPX pages
We have a ADF web application programmed in JDeveloper 11g (11.1.2.4.0), which was migrated over from a 10g (10.1.3.5.0) project Within the application, occasionally, we need to call a Java Applet which is placed in a public_html/applet folder. The j
-
Downgrade Photoshop elements 10 to Photoshop elements 9
I upgraded to Photoshop elements 10. It runs very slow on my older windows xp machine. I would like to remove Photoshop elements 10 and reinstall Photoshop elements 9. I do not want to use my photos or tags. Do I have to downgrade the catalogue and h