Lazy Nezumi - settings for use with CC

I am finding it hard to find my way round way this software - the incomprehensible (to me) manual doesn't help - and I'd be grateful for a steer on what are good default settings for smoothing curves in freehand drawing. None of the settings seem to help or have a simple and useful effect for freehand work.
Can I assume that it only works with the brush tool and not with other tools like the Art History Brush?
I know Trevor D has mentioned this software a couple of times.
Thanks.

David, you had me wondering there. I don't think I have ever used the Art History brush. I did try though, and initially thought LNP did not work with that tool, but with high settings I could see that it does.
For smooth lines use the Massive Smooth preset with mode set to Moving Average. The default values are good for the Brush tool, but seem to work better with much higher 'Amount' setting for the Art History brush. But I have no experience with the Art history brush, and don't even have a clear idea how it works.
Lazy Mouse with the Pulled string mode, are used for smooth lines with abrupt changes of direction. You have to stop and move the cursor back a touch to take the tension out of the pulled string. Then move in the new direction and when the pulled string becomes taut the line will follow the cursor again.
Actually, the animated gifs on the site explain it better than my words
Pulled String:
Moving Average
Moving Average + Catch Up
I don't think that Guilaume ever sleeps. He has never taken more than 30 minutes to reply to an email, even on Christmas day! He is super helpful, and tends to respond immediately if you use the LNP Chat facility.
If you check out the Feedback page, you'll find lots of LNP users that do 'similar' work to you, although I have to say none that were quite like your beautiful painterly type artworks. You'll possibly recognize some of the names, and maybe swap some ideas with them. It's quite a little community, but there isn't a forum unfortunately.
I am not sure how relevant they will be to your work, but do check out the Constraint presets. For line drawing I find they are really useful.
Lazy Nezumi Pro - User Testimonials
Having spoken nicely about your work David, it's only fair we let other users take a look
New Artwork photoart,digital painting,drawing,sketches,
But bottom line is to not hesitate to contact Guilaume if you need help. He will definitely get back to you.
[email protected]

Similar Messages

Saving Settings for use with Export using Quicktime Conversion

Dear All,
Is it possible to save a set of settings for use with the Export using Quicktime Conversion feature? The reason I ask is that we have to export a quicktime of every tv commercial we make (using the same settings) and it would be great if "one click" could deliver the export settings we need.
All the best, Sean

Well, you can create a droplet from Compressor that would do what you'd like...
Open compressor and in the Help menu, Select the user manual. Navigate to page 315.
Jerry

JVC GZ-HD7U MPEG Streamclip export settings for use with FCP

There are a number of compression options in the free MPEG Streamclip 1.9.2 and it's unclear what's best or how I would figure that info out. My guess is Apple HDV 1080i50, Apple HDV 1080i60, Apple DVCPRO HD 1080i50, or Apple DVCPRO HD 1080i60. The default setting was Apple Motion JPEG A, but this produced a huge file and doesn't seem right anyway. I think the desired frame size is 1920 x 1080, but I'm uncertain if I need to end up with an interlaced or progressive .mov file. My selectable options for progressive/interlaced are: "Interlaced Scaling," "Reinterlace Chroma," and "Deinterlace Video." Selecting "Deinterlace Video" excludes use of the other two options.
These clips will eventually be edited in FCP and I'm guessing that the appropriate settings will match whatever is selected at the export stage.
I'm using the JVC Everio GZ-DH7U HD Hard disk camcorder...I'm not sure if JVC uses the same setting across the board for it's HD cameras or maybe just the Everio cameras are similarly designed??
Thanks to all!!

the output should match the source file, generally speaking. So if you camera is making HD files then using a HD sized coded would suffice.
HDV (IIRC) is 1440x1080. I often find that using the default settings for a particular file type in Streamclip often work quite well.
As a test, take a small file. if it works, great batch process away, if not, tweak it and then try the same small file until you get a desirable result. Rinse and repeat.

Full-quality export settings for use with Xbox 360

Greetings, all.
I use Rivet to stream video from my Mac to my Xbox 360. Recently I purchased a Sony HDR-HC5 HDV camera, and I want to see that video on my TV at full quality. I don't have an HDMI cable or a DVI-to-HDMI cable, so my only option is to stream this video to the 360 via Rivet.
To accomplish this, I have been trying to export my video at full quality from iMovie HD 6, but one of a couple things happens: 1- the resolution is intolerably low (I want 1080i), 2- the 360 complains about an unsupported format. I've tried exporting in QT format with expert settings, but no matter what I try, I have been unable to find a combination that produces 1080i that can be viewed on the 360.
Surely somebody else on here has gone through this exercise and has figured out what works. If you have any info on this, please share! I searched through the archives and didn't find anything useful. I've also searched on Google and the answer is still elusive.
Thanks!

Thanks for the reply, but the Xbox will in fact view MPEG-4, which iMovie can export. The only problem I'm having is with the quality of the output. The quality is in the movie that is exported, not in the Xbox's viewing of the movie - the movie looks just as bad on my Mac mini as it does thru my Xbox...
With experimentation, I think I'm getting closer to my goal...

Garage Band Preference settings for use with Reason

i am trying to get my settings right in both GB and Reason so that i can record my reason samples into GB . So far i finally learned from you folks how to play the samples in either GB or R using of course my Keyboard and ii know to start GB first so it is master ,, Having done that , i can see that GB does recognize that i am pressing the keys even when playing the Reason sounds but the reason sounds are not showing up as a signal on the GB volume controls ,, all that shows is that little dot when i press a key next to the tempo .. So far i am thinking that i need my Generator setting in GB set to : AU NET RECEIVE ( ??? ) The Reason preference's under advanced MIDI are also ??? but under External Control in Reason , i need to know for Bus A , B , C , D which to have set at my : Kontrol 49 MIDI IN and which of the A,B,C,D BUS's to have set for : KONTROL 49 PORT A and/or KONTROL 49 PORT B . Thankyou much and i hope you all have a great rest of the day : ) Steve

Well, you can create a droplet from Compressor that would do what you'd like...
Open compressor and in the Help menu, Select the user manual. Navigate to page 315.
Jerry

Third party encoding for use with iDVD?

Hello All,
I have been doing a little bit of research on this, but I think I need some answers from more experienced users.
Are there any third party apps that do a better quality job of encoding video for use with iDVD? I edit my videos in Final Cut Express and then I import to iDVD and while the quality is OK I wonder if I can get it to look better ( I use SD footage and I encode in Professional Quality).
Has anyone here used a third party app that does a better job? (faster and/or better image quality)
Thanks for your help.
Mike

Mike - Be sure and double-check over in the FCE forum to make sure you're using the best settings to make the jump from FCE to iDVD.
The Pro algorithm is supposed to be iDVD's best setting (for all production lengths), if you have a shorter production (under 60 min), try using Best Performance and see if that gives you anything better.
John

User's default email address for use with Answers

How to use user's default email address for use with Answers?
When I was referring to the Admin Guide I found the below description for email session variable.
Can somebody please help me with this.
Contains the user's default email address for use with Answers. If the delivery option of Answers is enabled, an email device using this address will be created for the user upon first log in. Users can override this address by changing their account settings in Oracle BI Presentation Services.
Thanks,
Swetha

I think the documentation is wrongly saying that it will be used by Answers. The email will be used by Delivers, the BI Scheduler component.

Settings for using BlackBerry world

What are settings for using BlackBerry world???
When I want open it I have this massage:"there was a connection problem.BlackBerry World mus close"
Help me,plz.

Hi Farid-11388
You can update to 10.2 through the BlackBerry Link
But it is recommended to check if your Operator officially released the 10.2
And so it must be an update.
Always remember before upgrading to backup with BlackBerry Link.
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Could you guide settings for GWI with MS Outlook for CRM 7.0 .

Dear Experts,
Could you explaine the settings for GWI with MS Outllok for SAP CRM 7.0 and what are pre requests we need.
1. How to install this Add on in CRM 7.0 and which version is support for CRM 7.0.
2. How to set up (configure) in crm 7.0 and MS out look.
3. As per my knowledge from MS to CRM its bidorectional data flow isu2019t true?
4. Can we get masterdata like Accounts and Products in MS Out look tool?
5. How we can map activity from MS out look to CRM?
Regards,
Jemmi.

Hello Jemmi,
a lot of questions
Here some answers:
1. You do not have to install the add-on to CRM. It is a add-on to outlook. Just start the setup.exe you downloaded from the marketplace and select MS-Outlook and your language.
2. In CRM70 customizing search for "client profile" - here you will be able to customize for different businessroles different GWI settings. The settings will be synchronised to the client. You will not need to do settings on the client.
3. Biderectional is theoretically possible. We only use CRM to Outlook. If you do it the other way round you have to think about obligatory fields in CRM and where do you get the account ID from and and and. CRM to Outlook is simple.
4. Accounts and Products i guess no in standard. But contact persons is possible, appointsments and tasks are also possible.
5. No answer, we do not use this.
I hope this helps.
Good luck.
Kind regards
Manfred

Unsure about preparing a Dreamweaver Site for use with Contribute

Recently I designed a small Dreamweaver Website (DW CS2) for
a friend and it is already successfully online. So that my friend
can manage her own website, I`ve decided to prepare this DW site
for use with Contribute, but I'm unsure about the steps involved
and what files I will need to store on the server. Is the following
roughly correct?
Step 1: Define editable regions in these html files and save
these as html files.
Step 2: Enable Contribute Compatibility in DW before I upload
to the server.
Step 3: Is setting up a Connection Key necessary for my
friend`s access?
Step 4: Upload these. Do these completely overwrite the
existing Dreamweaver html files on the server? Or should I be
saving in another file format?
Many thanks to anyone who can advise me!

I sugggest these steps:
A: Dreamweaver:
1. build you site based on (a) template(s) with editable
regions
2. upload the website to the server
B: Contribute
1. create a connection
2. administer the website ( and create an admin password )
3. set the proper settings for your users (administrators,
publishers, writers), enable rollbacks
4. create a connection key fot you user with the proper role
and save that to disk
C: Dreamweaver
1. manage the site in dreamweaver
2. enable contribute compatibility (this way files get
checked in and out, so you know who is editing what)
D:
1. Sent the connection key to your user

HT204149 What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

Hey guys,
I found out an answer by myself...
The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows. The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

I cannot make these directions work
I downloaded media on Overdrive MEdia on my PC
I have the overdrive media ap on my I pod touch 4g
this media is suppossed to be compatible w/I pd touch
Notes on Transferring OverDrive MP3 Audiobooks…
Most MP3 capable devices should play OverDrive MP3 Audiobooks.
If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
iTunes® v9.0.2 (or newer) is required.
The Apple device must be formatted for use with Microsoft® Windows®.
The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
Connect the iPod® to your computer.
If it does not launch automatically, open iTunes v9.0.2 (or newer).
In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
The 'Summary' screen is displayed.
Place a checkmark next to 'Manually manage music…'.
Click the 'Apply' button.
The iTunes 'Summary' screen refreshes, and the changes are saved.
If desired, close iTunes.
Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Also you said " I want to add them to my iCloud, and also back to my computer. " Note that unless subscribe to iTunes match, only iTunes purchases are stored in iCloud.
Also,
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID

I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID?
The apple ID was his personal account and can no longer gain access. Im sure I can get purchase recipts from the accounting department if needed. I tried to put the Ipad in restore mode and used itunes to "recover" the ipad but it still wont let me in because he registered the device with the "lost iphone" feature or whatever that is.

Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.

HT3529 Is there a way to create, store and use preset messages for use with "Messages"?

Is there a way to create, store and use preset messages for use with "Messages". I often have a recurrinig message to send, after a repeating event, and need to enter the same short message each time. It would be nice to have this short message stored and selectable so that I do not need to enter each time.

found an answer that seems to work:
https://discussions.apple.com/message/17997300#17997300

Lazy Nezumi - settings for use with CC

Similar Messages

Maybe you are looking for