LB10 does not skip TO line in case of negative quantities

Hi gurus,
help me on addressing this issue please.
Case:
Pretend that a WM-Transfer Request was already created for a series of material linked to a certain Production Order --> 4 items in that case:
        So the Warehouse supervisor, when using LB10 is able to see this TR
A few minutes later, the Warehouse operator recognize that only one of this items needs an inventory change.
So, using MM-562 movement type and related TO, he set to 0 the quantities.
After this changes, the Warehouse Supervisor try to convert this TR into a TO using "TO IN BACKGROUND" button.
    This error message appear and NO TO were created.
There's any way to modify this behavior?
Is possible (like VL06P) to set up a customizing or user exit that can skip only the item that are not pickable??
My expectation is to have a TO with only 3/4 items.
In our system we didn't accept negative quantity, as for Client requirement.
Thanks a lot
Marco

Hi all,
thanks for the replies. I'll try to explain better my scenario:
Pretend that a WM-Transfer Request was already created for a series of material linked to a certain Production Order --> 4 items in that case
          I've got a Production Order BOM with 4 components. So the system creates a WM-TR with 4 different items:
Material A123
Material B321
Material C143
Material D312
          Maybe no one will process this TR due to the fact that the Picking Date is far from today.
          So the Warehouse Supervisor didn't convert it into a TO.
Maybe the day after, the Warehouse operator recognize that the stock of the material B321, is not correct. SAP is misaligned with the reality.
        So, using MM-562 movement type and related TO, he set to 0 the quantities.
After this changes, the Warehouse Supervisor try to convert this TR into a TO using "TO IN BACKGROUND" button:
Material A123 - stock at system level
Material B321 - NO stock at system level
Material C143 - stock at system level
Material D312 - stock at system level
This error message appear and NO TO were created.
There's any way to modify this behavior?
Is possible (like VL06P) to set up a customizing or user exit that can skip only the item that are not pickable??
My expectation is to have a TO with only the 3 item that I can pick.
In our system we didn't accept negative quantity, as for Client requirement.
Thanks a lot
Marco

Similar Messages

  • Items does not match schedule line

    Item does not match schedule line (program error) - message V1427 getting while accessing the Sales Order via VA02/VA03.
    While we see in table VBAP we can see all the line items except the Item number 10 for the order. However, in the table VBEP, we see 5 line items for the Sales Order.
    It is not allowing us to enter the Sales Order. Kindly help.
    Thanks in advance.
    Message was edited by:
            Praveen Kumar

    Hello,
    we've got the same problem.
    Because of some changes in an SD-Userexit the problems have been generated.
    In our case the SAP-notes can't help to solve the problem with VBAP/VBEP.
    I wrote an report which check and delete the excessive positions of both tables.
    Hope it helps.

  • MRP does not creates Shcedule Line

    I have a valid scheduling agreement LPA in place. Scheduling Agreement is approved and released status.
    I have source list also maintained for same scheduling agreement with long validity and MRP indicator as 2 - Create Schedule line automatically. 
    I am running MRP using following parameters in MD02.
    Processing key          NETCH               Net Change in Total Horizon
    Create purchase req.    3                   Planned orders
    Delivery schedules      3                   Schedule lines
    Create MRP list         1                   MRP list
    Planning mode           3                   Delete and recreate planning data
    Scheduling              2                   Lead Time Scheduling and Capacity Planni
    Even schedule line and other parameters maintained properly, MRP creates planned order and does not creates Schedule Line automatically. Material Master is maintained MRP Type PD, Lot Size as Replenishment to maximum stock level, Safety stock, No strategy and availability on.
    What I am doing wrong? With same setting in other system it is working perfectly fine.
    Any feedback appreciated.
    Thanks
    PP

    Hi
    Check whether the Agreement Open Target value .
    If the target quantity was completed . so system will not create the Schedule lines for the material
    2. If you mainatian the open period in the smk.
    so system will create the planned order instead of schedule agreement. check

  • Part of Photoshop isn't functioning.  Under adjustments, when HDR toning is clicked on I get a code:  Error 48: File or folder does not exist.  Line:11  - $.evalFile(g_StackScriptFolderPath   "StackSupport.jsx");  How can it be fixed?

    The phone company was here working on something while I was gone.  They sat down at my computer (iMac) and since then HDR toning doesn't work.  Get the code:   Error 48: File or folder does not exist.    Line: 11     ->  $.evalFile(g_StacScriptFolderPatch + "StackSupport.jsx");   How can this be fixed?   

    Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).

  • The RFUMSV50 program does not generate transfer lines of deferred VAT

    Hello;
    The RFUMSV50 program does not generate transfer lines of deferred VAT ,
    The context is the following one:
    Code VAT Created with code target VAT, general account of VAT also created,
    Rule of deferred VAT created and activated for the company code in question, with marks to compensate for check.
    The data of tests are the following ones:
    Creation of an invoice via the FB60,
    Integral payment of the invoice via F-53,
    Creation of the confirmation of the operation in bank via the manual statement FF67,
    Clearing of the intermediate banking account  with the bank account  via F-03.
    After all these elements, by executing the RFUMSV50 program, I have nothing in result.
    There somebody who had the same problem, could help us?
    Thank you.

    Hi
    Service Tax credit cannot be utilized unless the Vendor Invoice is Paid. This is the reason till the payment is done the service tax Amount will be accumulated in deferred tax account and once the invoice is paid the balance in deferred tax is need to be transferred  to respective Service Tax , Educational Cess and higher Education Cess account. There can be various business scenarios for full and Partial Payment to facilitates the transfer of such deferred balance to respective account SAP has come up with some new standard program RFUMSV50 instead of RFUMSV25. To overcome the limitation of this program i.e. not able to take care of more than one tax line item, below the solution is provided with scenarios “Full Payment is made to Vendor Invoice”. 
    hope this is help ful
    thanks
    Trinath

  • Item does not match schdule line ( program error ) message no . V1427

    *Item does not match schdule line ( program error ) message no . V1427 .* This is the message I am getting when I am trying to display a quotation through VA23 . From here system exits the transaction .
      As per my observation , when I compared VBAP and VBEP tables, there are 2 items in VBEP table with schedule lines but the same items are not present in VBAP table.   User says he tried to delete these items because there is no quanity , Inspite of that these items appear in VBEP table .
    The document is a reservation document where in schedule line category does TOR and availability check.
    I checked various related notes - 442831 , 401463 , 389687  etc .  These are quite old notes and I am in release ECC 5.0 .
    What is the best way as this doc has nearly 30 items and nearly all of them have quanity confirmed .
         Please provide your valuble inputs ...
    Regards
    Raghav..

    Nitin,
    Below are the steps to check
    Transaction SE18
    Definition name: BADI_SD_SALES
    Menu: Implementation -> Overview
    double-click on implementation: IM_CORE_CHECK
    Now you will get an overview on the methods.
    check whether implementation IM_CORE_CHECK is active or not.
    If not Press the change button and activate
    looking at the your system pack level this should be active. If it is active then the inconsistency must be modified directly at database level through Z report.
    Ramesh

  • Item does not match schedule line (program error)

    Dear Experts,
    I Transaction VA02/VA03 when i put Sales order number  and try to get in to the system system through error and terminate the transaction
    ERROR is  "Item does not match schedule line (program error)" with Message no. V1427
    when i check Table level and analyse thr Debuging i found that
    Table VBAP line item 10 is missing and table VBEP line item 10 is there due to this miss match its shows above error
    Question
    Why and How it happen and how to fix this issue???
    Best Regards
    hanumant

    Check Note 442831 - V1427: Item does not match schedule line (program error)
    thanks
    G. Lakshmipathi

  • Item does not match schedule line (program error) in sap

    Dear Expert.
    Greetings!
    We are currently facing with this error (V1 427 item does not match schedule line (program error) in sap), when we open the sales order(VA02/03).
    The error  is occurring due  inconsistency on the database tables, some Item is in  table VBEP, but it is missing from table VBAP.  This is what is causing the error message.
    I checked various related notes - 442831 , 401463 , 389687  etc .  These are quite old notes and I am in release ECC 6.0 .
    Report SD_CONSISTENT_CHECK_EXT and SD_CONSISTENT_CHECK are already available.
    Bapi BAPI_SD_SALES is also active.
    Please let me know if anybody has any idea on the same.
    regards
    Praveen

    Hi,
       Refer the KBA:  1464620 - Error V1427: Item does not match schedule line   which explains the reason and the solution for the issue.
    Regards,
    AKPT

  • I have a song that skips on my main mac because its a downloaded copy. But on my other devices(iPad, Apple TV) it does not skip because its in the cloud. How do I make a downloaded song back into the cloud?

    I have a song that skips on my main mac because its a downloaded copy. But on my other devices(iPad, Apple TV) it does not skip because its in the cloud. How do I put a downloaded song back into the cloud?

    Delete the track from the iTunes library, but not from the cloud.

  • Legend does not display with Line Chart

    I have a query that I wrote with Bex Query Designer v3.5.11 for a BW 3.5 system.  When I click Graphical Display tab in the query results, "Column Chart" shows a legend, showing which colors mean what.  However, when I switch to a different type of chart, such as Line Chart, Legend does not appear.  Anyone know how to make this appear?  without the legend, the chart isn't very useful.

    You can create a Web Template, Drag a Chart.
    1) Assign a query to the chart
    2) Right click over the Chart and select Edit Chart
    3) Select Chart Designer.
    4) Look for "Series" in the Overview Window
    5) Expand the Series.
    6) Activate the checkbox "Show Labels" on all the
       series that you want to have values.
    Regards
    Armando Flores

  • Decode does not work for line breaks

    Hi experts,
    In a BLS, I am decoding a string which I output .  It decodes the spaces but not for linea breaks.  What is wrong ¡?
    Thanks and best regards,
    Antonio Rodriguez  Rubalcaba

    Jeamy, 
    I forgot the examples .
    Best regards,
    NOTE
    Note : Copying and pasting the text into the note pad shows no problem ( it has linebreaks ) . This is also true when I copied the decoded thext from the INFO section of the Transaction execution onto this message . However , the BLS OUTPUT does not have line breaks .
    UNDECODED TEXT EXAMPLE
    I use the following expression : "Text = " & IllumSQLQuery_0.Results{/Rowsets/Rowset/Row/NOTA} and I get the following :
    INFO : Text = REPRESENTACION%20NUEVO%20LAREDO.-%20SE%20RECIBE%20LOTE%20DE%20GAS%20DE%20IMPORTACION%20POR%2015%2C000%20BLS.%20FLUJO%20DE%20RECIBO%201%2C322%20BPH.%20%0D%0AINICIO%20EL%20RECIBO%20AYER%20A%20LAS%2023%3A50%20HRS.%0D%0A%0D%0AREPRESENTACION%20CADEREYTA.-%20EXISTENCIA%20BOMBEABLE%2010%2C000%20BLS.%0D%0A%0D%0ATDGL%20POZA%20RICA.-%20EXISTENCIA%20BOMBEABLE%206%2C000%20BLS.%0D%0A%0D%0ALPG%20DUCTO.-%20SE%20PRESENTO%20FALLA%20EN%20LA%20ESTACI%D3N%20NO.%204%20DE%20REBOMBEO%20SUSPENDIENDO%20EL%20FLUJO%20DEL%20LPG%20DUCTO%20DE%20LAS%2004%3A50%20A%2005%3A05%20HRS.%0D%0A%0D%0AB/T%20ANAFI.-%20ARRIBO%20EL%2010.02.2011%20A%20LAS%2006%3A00%20HRS.%20PARA%20DESCARGAR%2020%20MTM%20DE%20AMONIACO%20EN%20LA%20TDGL%20TOPOLOBAMPO%2C%20SE%20ENCUENTRA%20FONDEADO.%0D%0A%0D%0AB/T%20GASCHEM%20HAMBURG.-%20CONTINUA%20DESCARGA%20DE%20AMONIACO%20EN%20LA%20TDGL%20TOPOLOBAMPO.%20DESCARGADO%206%2C430%20TM%2C%20POR%20DESCARGAR%208%2C570%20TM.%0D%0A%0D%0AB/T%20BW%20BOSS.-%20ETA%2001.03.2011%20PARA%20DESCARGAR%2046.8%20MTM%20DE%20GAS%20LP%20EN%20LA%20TR%20PAJARITOS.%0D%0A%0D%0ACOATZACOALCOS%3A%20CONTINUA%20EL%20ENVIO%20DE%20BUTANOS%20A%20LA%20REFINERIA%20MINATITLAN.%0D%0A
    DECODED TEXT EXAMPLE
    I user the following expression : "Text = " & IllumSQLQuery_0.Results{/Rowsets/Rowset/Row/NOTA} and I get the following :
    INFO : Decoded Text = REPRESENTACION NUEVO LAREDO.- SE RECIBE LOTE DE GAS DE IMPORTACION POR 15,000 BLS. FLUJO DE RECIBO 1,322 BPH.
    INICIO EL RECIBO AYER A LAS 23:50 HRS.
    REPRESENTACION CADEREYTA.- EXISTENCIA BOMBEABLE 10,000 BLS.
    TDGL POZA RICA.- EXISTENCIA BOMBEABLE 6,000 BLS.
    LPG DUCTO.- SE PRESENTO FALLA EN LA ESTACI�N NO. 4 DE REBOMBEO SUSPENDIENDO EL FLUJO DEL LPG DUCTO DE LAS 04:50 A 05:05 HRS.
    B/T ANAFI.- ARRIBO EL 10.02.2011 A LAS 06:00 HRS. PARA DESCARGAR 20 MTM DE AMONIACO EN LA TDGL TOPOLOBAMPO, SE ENCUENTRA FONDEADO.
    B/T GASCHEM HAMBURG.- CONTINUA DESCARGA DE AMONIACO EN LA TDGL TOPOLOBAMPO. DESCARGADO 6,430 TM, POR DESCARGAR 8,570 TM.
    B/T BW BOSS.- ETA 01.03.2011 PARA DESCARGAR 46.8 MTM DE GAS LP EN LA TR PAJARITOS.
    COATZACOALCOS: CONTINUA EL ENVIO DE BUTANOS A LA REFINERIA MINATITLAN.

  • EMac modem does not release phone line

    I have an original eMac. The modem is capabale of receiving and sending faxing. However, occasionally it does not "release" the phone line causing any incoming fax to get a busy signal and if you try to dial the phone number you also get a busy signal. Unplugging the phone line from the modem port resolves the issue as does restarting.
    What can be done to fix this issue besides getting a new modem.
    Thanks!

    I recall having similar problems with my home pre-broadband dial-up account under 10.1.5. That was blamed on the computer modem and the ISP modems implementing different versions of the same modem protocol (which certainly doesn't say mush for the 'standard' part of the v.92 protocol). That I thought was fixed in later versions of OS X, but you may still want to contact your ISP to ask them if they're aware of other Mac dial-up users with the same problem and if they can suggest any modem commands to add to your modem command strings. You can ask them to check on their end to see if they're receiving the line release command from your modem when you attempt to hang up.
    Since most Mac-related questions to ISP support seem to garner a response of "huh?", your other option would be to try dropping the modem protocol from v.92 to v.90 (and if necessary even lower) to see if those protocols are more compatible with your ISP's modem banks.

  • Reschedule does not update schedule line after upgrade

    Dear All,
    After upgrade to ECC6.0, the reschedule does not update EKET any more but it update ekpo as usual.I debugged it , before the function module SD_BACKORDER_**_SAVE everything is ok.
    I also checked the sap note for the new field in T161V.But When I choose other option about customzing. eket are updated every time when the reschdule program run.This will lead double delivery.
    Do you have any suggestion？
    Edited by: Edward on Feb 23, 2010 9:03 PM

    Hi,
    On the initial screen of V_V2
    Remove tickmark of SIMULATION, Then it will update schedule lines in sales document
    Kapil

  • Nano does not skip songs marked in iTunes to "Skip when Shuffle"

    When I am listening to my music in shuffle mode on my nano, why does my nano not skip the songs that I have marked to "Skip when Shuffling" in iTunes?

    I'm shuffling the whole library on my nano. I have confirmed that the songs that I marked to be skipped are still marked as "skip when shuffling" in iTunes after the nano played them

  • Timemachine does not show time line when choosing 'Enter time machine'

    Hi all,
    I have been using TM with my Mac Mini Snow Leopard Server without any problems until today. TM still does the backups OK, but when I select 'Enter time machine' the user interface does not get deployed fully. I will show the Finder window in the middle of the screen, but the timeline does not appear. Not happens next; the underlaying desktop stays visible. When I close the window by clicking the red button I see briefly flash a part of the TM bar at the bottom of the screen and then it returns to normal desktop use.
    Does anybody know why TM will not start the restore interface and how I can get it fixed?
    Thanks a bunch for any replies.
    Huib Maaskant

    Try the things in #E4 of the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.

Maybe you are looking for