Lbi in dwt uses wrong links

I have a website based on some .dwts I have created and I am
trying to switch the menu for that site to an .lbi I have created.
I insert the .lbi into the .dwt but the actull .html pages end up
with the wrong links to the .gifs for the new menu. I have to copy
the "menu" folder into the folder for each .html file for them to
show correctly.
Can any one give me some tips for using an .lbi in a .dwt?
Thanks
Edit: I think I got it. I just moved the menu folder up a
level.

Are you placing the .lbi file into a non-editable region of
the template?
If so, why bother?
Anyhow, please show me the context of the Library item code
in your template
page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"k1ll1nt1m3" <[email protected]> wrote in
message
news:f1bjcu$50t$[email protected]..
>I have a website based on some .dwts I have created and I
am trying to
>switch
> the menu for that site to an .lbi I have created. I
insert the .lbi into
> the
> .dwt but the actull .html pages end up with the wrong
links to the .gifs
> for
> the new menu. I have to copy the "menu" folder into the
folder for each
> .html
> file for them to show correctly.
>
> Can any one give me some tips for using an .lbi in a
.dwt? Thanks
>

Similar Messages

I have iPhone 4s, and using latest iOS. When I try to open any link from Twitter or Facebook, it goes to open some wrong webpage. My iphone seems to be infected or suffering from some spyware or malware. How can I remove this wrong link opening

I have iPhone 4s, and using latest iOS. When I try to open any link from Twitter or Facebook, it goes to open some wrong webpage. My iphone seems to be infected or suffering from some spyware or malware. How can I remove this wrong link opening ? Please help me to resolve...

I think the McAfee suite will do the trick when I pay them a one-time fee of $69 or $179 for a year for unlimited support.
Your call of course but IMO a waste of money. Please read this first:
There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
More useful information can also be found here:
http://www.reedcorner.net/mmg/

Obiee11g(11.1.1.3.0) - Download issued Excel and pdf (by used Action link)

Hi,
I have used Action link in obiee11g version, in my report is working fine. but one thing while downloading my report as excel and pdf it's showing action link also.actuallly it should not come.kinly check below images.
1) this my actual o/p in my dashboard side.i am expecting the same in PDF and Excel also.
http://imageshare.web.id/images/q9bt8ssjk450si4ayqyq.jpg
2) in excel o/p .here the action link should not appear.
http://imageshare.web.id/images/g6rfkcggkd19ft2ub6bf.jpg
3) in pdf o/p .here the action link should not appear.
http://imageshare.web.id/images/huu096awbjof9sq3dto2.jpg
i have refered this as a bug in 11.1.1.3.0, is there any work arround to resolve this issue.
Thanks
Deva
http://obieeelegant.blogspot.com/

Hi,
Yes .That is a Bug .When you have a Navigation links on Measures then, when you download the Report to Excel then you will be facing diffculty in getting the Totals and calculations wrong in the EXCEL .
But when you Remove the Navigation links on the Measures then the Excel will have no problems in showing out the Totals.
This was in 11.1.1.3 and also it is not resolved in 11.1.1.5 .
We have already filed an SR ,and they said that they will be resolving the Issue in their later Versions .
Might be if they get so many SR's on this Issue they might release an Early patch before the Next version Release.
Thanks
Xavier

[svn:bz-trunk] 8910: Bug: LCDS-936 - Should have better error message in servlet log if server in services-config .xml is configured to use wrong class.

Revision: 8910
Author:   [email protected]
Date:     2009-07-29 14:22:26 -0700 (Wed, 29 Jul 2009)
Log Message:
Bug: LCDS-936 - Should have better error message in servlet log if server in services-config.xml is configured to use wrong class.
QA: Yes
Doc: No
Checkintests: Pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-936
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java

After many hard working days.i finally found the error cause,i needed to make weblogic datasource also ADF doesnt work on internet explorer browser,it works on safary.hope it helps somebody

Overlapping view for /calendar.aspx generate wrong link to tasks

I am using SP2013 on-premise. In a site collection we have built multiple subsites. Each subsite have a calendar. At the root site, we built a calendar control and enabled overlapping view. So that several subsites' calendar can merge into single view.
It works as expected but some tasks' link are wrong.
The wrong link show:
https://sharepoint.com/sites/AAA/Lists/Tasks/DispForm.aspx?ID=16
The correct link should be:
https://sharepoint.com/sites/AAA/Lists/Calendar/DispForm.aspx?ID=16
Is it a known bug or I have configured it in wrong way? Any advice? Thanks.

Hi Mark,
I tested the issue per the steps below:
1.Create a calendar list named Calendar in the site collection, the url is
http://sp:60/sites/first/Lists/Calendar/calendar.aspx .
2.I create a subsite http://sp:60/sites/first/sub1, then create a calendar named Sub1-Calendar, the url is
http://sp:60/sites/first/sub1/Lists/Sub1Calendar/calendar.aspx .
3.Then I create a Calendar Overlay as:
If I click some event in Sub1-Calendar on the overlayed calendar, the url is
http://sp:60/sites/first/sub1/Lists/Sub1Calendar/DispForm.aspx?ID=1 .
All the behaviors are as expected. However, since I created the calendars by default, I'm not sure if there is customization in your situation. I'd suggest you investigate the Task list
https://sharepoint.com/sites/AAA/Lists/Tasks, is it a OOB task list? Are the task items related to the calendar list events?
By the way, please create a simple event on the subsite calendar and go to click the event on the overlayed calendar, see if the url is the correct one.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Why is Firefox STILL allowing website drive by browser hijacking by LAME "Your broswer has been blocked" exploit-NO other malware-just clicked the wrong link.

This silly ass "window-won't-close-just-keeps-relaunching" exploit is so ancient it has whiskers.
Incredibly embarrassed that this happened to my friend, since I was the one that encouraged him to use Firefox in the first place.
... and NO he didn't install any malicious .EXE -or- Pluggins -or- Extensions, just clicked the wrong link in trying to cancel a pop-up that Firefox should never have allowed in the first place.
I say this because, from reading this Forum for YEARS now, this is generally the point where the totally lame "Well there well always be ways to "human engineer" these kinds of exploits..." excuses start, so let's not even go there.
Instead of resisting this attack, Firefox makes it WORSE, because if you open task manager and kill Firefox, then Firefox sees that as a CRASH, and tries to coverer it's tracks by automatically re-launching the previous session (instead of the PROPER behavior, which would be to load the standard user-prompted selective-restore page).
Frankly, as I mentioned above, this is embarrassingly BAD...
Just try to close a pop-up window (that shouldn't have 'popped up' in the first place) and your lame-o broswer locks up and helps some con-man try to scam you for $500.
PATHETIC. This kind of thing is the reason I dumped MS Explorer long ago.
I have been a strong Firefox supporter since the very beginning, so I'm not trying to raise any hackles here, but finding boneheaded serious security vulnerabilities like this, while Firefox developers are wasting time making the the 'new' Firefox interface more like the piece-of-garbage Windows 8 Explorer interface (which I DESPISE), has caused me to loose faith in Mozilla, so can someone suggest some alternatives other than Firefox and Chrome?
Seriously, I'm not looking to fight about it, run your project any way you want, but some help in picking an alternative browser that I can trust would be greatly appreciated.

''richsopn [[#answer-714480|said]]''
<blockquote>
What's this have to do with Mozilla? - because Canonical's lack of updates should be no problem, right? - Hey just click that little 'auto updates' button under 'advanced options' on your Windows PC's right? -- Oh, sorry Linux users, despite the Linux roots of many of Mozilla's developers, and the many critical Linux spawned tools they use daily to create Firefox, Mozilla apparently feels Linux users are SECOND CLASS CITIZENS WHO ARE JUST NOT WORTH SUPPORTING WITH DIRECT UPDATES LIKE THEY PROVIDE FOR PC USERS.
Support they get from Canonical '''and Mozilla''' -> ZERO
... and I'm not talking about some guy who runs a geeky, totally insecure 'non-official repository' I'm talking about a simple check-box that I can click, and continue to get updates directly from Mozilla.
</blockquote>
The build you have is a third-party build and not one provided by Mozilla and Mozilla does not provide updates for third-party builds they did not well build.
Mozilla does support Linux and still strongly do as they have both 32-bit and 64-bit builds including for Release. www.mozilla.org/firefox/all
They get Firefox updates just like on Windows as long as the Firefox has red/write permissions as a easy way around for the user is to have it in /home
Since you are using a five year old version of Ubuntu you need to meet minimum package requirements at least. https://www.mozilla.org/en-US/firefox/37.0.1/system-requirements/
Heck Mozilla supports Linux and Mac OSX better when it comes to 64-bit Firefox as there were 64-bit Releases for Linux and Mac ever since Firefox 4.0 while for Windows the first Win64 Release ''may'' be finally at Firefox 38.0
If you prefer say Gnome 2 and want to stay away from say Gnome 3 and Unity in newer Linux distros then look into say Xfce as it is both light and can look very much like Gnome 2 and can use gtk2 themes.

Used Dynamic Link to import a sequence, Can't do anything with it

I have used Dynamic Link in Encore CS5 to bring in a sequence from Premiere Pro CS5. The sequence shows up in the Encore "project" panel. When I try to bring the sequence into a timeline Encore does not let me. I drag it to the timeline and I see a + sign in the timeline. When I let go nothing appears in the timeline. What am I doing wrong?

Figured out what I was doing wrong.
Thanks,

Delay whilst using/dragging link tool

Hello, this is very annoying, I have an interactive .PDF document with small areas set aside for links to be inserted, when I select the link tool and click and drag (as per the help file "creating links using link tool") the link is created from the end drag point not where I started the drag, this is a...drag! And is very time consuming to then either re-do the link or I have to re-scale it and/or move it. I'm using Acrobat 3d version 8.
Is there something I'm missing or doing wrong? It is happening on my work colleges PC too (Acrobat 8 pro.)

Hi Eric,
You should probably ask this question on the regular User-to-User forum, as this forum is specifically for 3D issues. I have Acrobat 9 Pro Extended installed, but I can tell you that when I use the link tool, if I drag down and to the right, the upper left-hand corner of the resulting box is my start point, which is what I expect. If I drag down and to the left, the lower right-hand corner is where I started, as expected.

Unable to access oracle 10g DB package from 8i using DB link

Hi,
We have two oracle 8174 database A and B. One of the package in A calls an package in B using db link. The database B was upgraded to 10g (10.2.0.4). After the upgrade, the package in A got invalid. When tried to compile system hangs. No error is encountered.
In UAT there was no issues. But only in production we face above problem. Can you please advise what went wrong. Is it due to incompatibiity?

Can You logon that user an recompile?
I hope you will see error something...
Pacakages on B(10g) database.. invalid or not???
Anyway Can you recreate your packages? ... (create or replace...)
By the way, you might check something from Oracle Support
Good Luck

No content loads when using portal links

We recently upgraded from 3.0.9.8.2 to 3.0.9.8.5 and in the new version we are having issues with our favorites portlet as well as any links that users create to send to other users. In the new version, after a user logs in, if they click on a saved favorite link, the new page does not load. The tabs at the top of the screen stay and the content of the page is left blank. The same thing happens if you copy a link into the browser window after logging in. However, if you navigate to the tab that the link is going to, and then go back to the login page and use the link, it works fine. We have a TAR logged with Oracle and they do not know what is wrong. Has anyone experienced a similar problem or know a solution?
After testing, we came up with something interesting. When we were creating favorites, we were going to the page we wanted, copying the URL, and pasting it into a favorite. This URL is fairly short. Just now I tried right clicking on the folder I wanted to make a favorite and copying a shortcut. This URL is much longer (although it should point to the same place as the short one). When I tested the favorites, the first URL loaded a blank screen (as you saw in the ODC), but the second loaded the page correctly. I went back to our System Test environment to make sure that the problem does not exist there (this instance is still 3.0.9.8.2). Both the short URL and the long URL worked. Why should patching the portal cause the short URLs, which worked before, to
stop loading pages correctly? Here is an example:
Portal Production (3.0.9.8.5)---------------------------------------------------------------------------
URLs for My Regional tab
WORKS(right-click and copy shortcut)
http://portal.us.colorcon.com:7777/pls/cc_prod/CC_INTRANET.wwpob_page.changetabs?p_pageid=952&p_regionid=2264&p_portletid=956&p_mainpageid=952&p_mode=3&p_debug=0&p_back_url=http%3A%2F%2Fportal.us.colorcon.com%3A7777%2Fservlet%2Fpage%3F_pageid%3D952%2C956%26_dad%3Dcc_prod%26_schema%3DCC_INTRANET
BREAKS(navigate to page and copy URL)
http://portal.us.colorcon.com:7777/servlet/page?_pageid=952,956&_dad=cc_prod&_schema=CC_INTRANET
URLs for QA Tab under My Knowledge (this is a sub-tab)
WORKS(right-click and copy shortcut)
http://portal.us.colorcon.com:7777/pls/cc_prod/CC_INTRANET.wwpob_page.changetabs?p_pageid=952&p_regionid=2277&p_portletid=997&p_mainpageid=952&p_mode=10&p_debug=0&p_back_url=http%3A%2F%2Fportal.us.colorcon.com%3A7777%2Fservlet%2Fpage%3F_pageid%3D952%2C954%2C960%2C997%26_dad%3Dcc_prod%26_schema%3DCC_INTRANET
BREAKS(navigate to page and copy URL)
http://portal.us.colorcon.com:7777/servlet/page?_pageid=952,954,960,997&_dad=cc_prod&_schema=CC_INTRANET
Portal System Test (3.0.9.8.2)-------------------------------------------------------------------------
URLs for My Regional tab
WORKS(right-click and copy shortcut)
http://hercules.us.colorcon.com:8020/pls/cc_prod/CC_INTRANET.wwpob_page.changetabs?p_pageid=952&p_regionid=2264&p_portletid=956&p_mainpageid=952&p_mode=3&p_debug=0&p_back_url=http%3A%2F%2Fhercules.us.colorcon.com%3A8020%2Fservlet%2Fpage%3F_pageid%3D952%2C956%2C960%2C964%2C48%2C47%2C614%2C50%2C103%2C49%26_dad%3Dcc_prod%26_schema%3DCC_INTRANET
WORKS(navigate to page and copy URL)
http://hercules.us.colorcon.com:8020/servlet/page?_pageid=952,956,962,964,48,47,614,50,103,49,1006,1020,1154,1060&_dad=cc_prod&_schema=CC_INTRANET&2086_IT_EBUS_PROJ_93987.p_subid=83600&2086_IT_EBUS_PROJ_93987.p_sub_siteid=1&2086_IT_EBUS_PROJ_93987.p_edit=0

Hi,
The reason why I decide to use Light Framework, itu2019s because Iu2019m creating an EFP, and Iu2019m using the WPC to publish the content (articles, news, and link list), using the standard Web Forms.
The problem is, after adding to a WPC Page something so simple like an article (using the Web Form Article), no Portal iView, HTMLB or other stuff included, the preview of the WPC Page using the Default Framework Page is ok, but when using the Light Framework Page, the text in the article doesnu2019t have the correct font-family. It looks like there are some styles missing in the Light Framework Page, that WPC content is expecting.
Thanks and Regards,
John

Logical error in creating tables using db link in solaris

Hi,
While creating table using the syntax create table newtab...as select * from tab@dblink .. I am facing a problem. The newtab table created is having a structure different (from datalength point of view of varchar2 and char datatypes) from the source. The data length is getting tripled i.e. if a column a is varchar2(20) in tab then it is becoming --- a varchar2(60) in newtab. This is happening in solaris environment when the two databases are in 2 different servers. Please let me know if there are any patches to resolve the problem.
Thanks
Arnab

ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link?

Issue using data link in XML Publisher

Dear All,
I am new to XML Publisher, for the first time trying data link concept in XML Publisher tool. The issue is very simple, I have two queries Q1(say it fetches sales_order_number, application_name ) and Q2 (say it fetches sales_order_number , error_number, error_description). And sales_order_number is passed as input using data link to Query Q2 from query Q1 and Q2 will retrive more than one row for a given sales_order_number.
Say for a given dept_name 1001 the output will be something similiar like
Q1:
SO# | Appl.Name
1001 | 'Invoice '
Q2:
SO# | Error.# | Error Desc
1001 | 1512 | No Data Found
1001 | 1513 | Invalid Entry
1001 | 2674 | Error while inserting the record
and the query which I have used in XML template goes like this
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[select sales_order_number, application_name
                  from T1
                 where sales_order_number = :in_sales_order_num]]>
</sqlStatement>
<sqlStatement name="LINES">
<![CDATA[
select sales_order_number , error_number, error_description
from T2]]>
</sqlStatement>
<link name="Dummy_LINK" parentQuery="Q1" parentColumn="sales_order_number" childQuery="Q2" childColumn="sales_order_number" condition="="/>
</dataQuery>
<daraStructure/>
And the grouping is as follows
<group name="G_Q1" source="Q1">
     <element name="sales_order_number" value="sales_order_number"/>
     <element name="application_name" value="application_name"/>
<group name="G_Q2" source="Q2">
     <element name="sales_order_number" value="sales_order_number"/>
     <element name="error_number" value="error_number"/>
     <element name="error_description" value="error_description"/>
</group>
</group>
And in the RTF template I have properly used <?for-each:G_Q1?> <?for-each:G_Q2?>- --
<?end for-each?><?end for-each?>
Ideally the header (Q1) should have one row and the lines (Q2) should have 3 rows. But the issue here is even Q1 produces 3 rows.
If in case Q2 has 4 records, then Q1 also plots 4 records in the report output. Hope I am explaining the issue correctly. Any help to resolve the issue would be a great. Thanks in advance.
Regards,
Antony.

try like this
<?if: (TYPE='A') or (TYPE= 'B')?><TABLE STRUCTURE><?end if?>
or
<?if:contains('A~B', TYPE )?><TABLE STRUCTURE> <?end if?>

Issues with using relative links in Captivate 8

Is anyone else having issues with using relative links in Captivate 8? These links all used to work in the previous version of Captivate. And I could have sworn this was fixed already once in Captivate 8 but it's popping up again for us. Here is the situation... We have courses that are made up of multiple lessons which as separate Captivate files. Within those lessons are buttons to link to external documents (which live in a shared document folder), demonstrations, etc. We use relative links because we post these to our amazon servers and we also sell them to clients where they can post them on their own web servers or in their LMS. SO we can't put in full paths for the links or we'd have to change them constantly. So an example is that the link for a button might be "../Document/nameofdoc.pdf" This would be going to a user guide or something that is posted in the "Document" folder that lives at the same level as the lesson's folder. But now, all of the sudden, none of our bazillion links is working. And I've tried buttons, hyperlinks, and even the old click box. Nothing works with relative links. And I did check the permissions on every file and folder on our Amazon server to verify nothing changed there as well. Any suggestions?

I have the same issue with relative links using Captivate 8. I am trying to load Captivate modules into an LMS using relative links to document files within the LMS. The links work fine during a site page test so not an issue in the LMS, but from the Captivate module they aren't working....
Help?

Open Page in new window using action link

How do I open a page in a new window, using action link ?
If I put javascript window.open in OnClick event, the action event ins�t called.

Hi,
The window.open method can be used with the hyperlink component. So please try it with a hyperlink component.
Cheers
Giri :-)
Creator Team

Using web link to call the report by passing the parameter but report blank

Hi,
I have using web link to prompt to generate the report(Quotation Format) by passing SR number in Service Request object.
The result return is blank report, the URL link that i put in as below :-
https://secure-ausomxega.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Options=rfd&Path=/shared/Company_AEGA-3V6GLL_Shared_Folder/SR%20Quotation&Action=Navigate&P0=1&P1=eq&P2="Service Request"."SR Num"&P3=%%%SR_Number%%%
If preview in report folder, the report is generated with the output.
Is my syntax having problem or the method cannot be done this way?
Please advise

Hi Alex,
I manage to get the report output but the result is always same.
i have checked the filter, the filter is calling the SR number.
When i try to output to PDF an error prompt :-
Sax parser returned an exception. Message: Expected entity name for reference, Entity publicId: , Entity systemId: , Line number: 335, Column number: 12
Error Details
Error Codes: UH6MBRBC
Thanks
SK

Lbi in dwt uses wrong links

Similar Messages

Maybe you are looking for