LBWE 2LIS_06_INV
Hi Friends !
We need to use standard extractor 2LIS_06_INV. Using LBWE, when I am trying to generation datasource it says "Datasource 2LIS_06_INV" doesnot exist. ECC Version is 6.
Am I missing some steps? Do we need to install via Business Contact (RSA5)? Please advise.
With Regards
Rekha
Hi Rekha,
First you need to activate the Datasource in RSA5 by selecting the Datasource and click on Transfer datasource/Active Datasource(4.7)
After that do the Post processing of data sources in RSA6 by selecting the options selection, hide, inversion and field only known in customer exit
Go to LBWE then do the rest of the things
Regards,
Tiragati Anand
Similar Messages
-
How to extract data into the set-up table for 2LIS_06_INV LIS structure
We are using ECC 6.0 and SAP BI NW 2004S. I activated the 2LIS_06_INV (Invoice Verification) structure. Interestingly, I don't see any Events under this structure (MC06M_0ITM) - my understanding is the events usually determine what type of data is generated for a given structure.
I see Invoice Verification when I use the Inventory Management -Perform Setup option when doing the set-up tables. However, when I use this option, I get a message saying " No extraction structure active or no BW connected".
Can someone list the pre-requisites and the steps to load the set-up table for the 2LIS_06_INV structure.
Thanks,
Sanjay1: RSA5 Activate Data Source
2: LBWE Activate datasource again
3: SBIW Fill setup table 'Settings for Application-Specific DataSources (PI)'-> 'Initialization'->'Filling in the Setup Table'->'Application-Specific Setup of Statistical Data'->'Invoice Verification - Execute Reconstruction' -
2LIS_06_INV Extractor problem
Hi,
I Want to use Invoice Verification : 2LIS_06_INV data source. When i see description of this datasource in Businee content ,its taking data from RBKP,RBCO,RBEX,RSEG.
http://help.sap.com/saphelp_nw70/helpdata/en/57/dad06449114814919000e27dfb255e/frameset.htm
But if i see in LBWE ,maintain Datasource , It is showing RBCO,structures RBHD,RBITM,RBKEY.
why this difference. Even if i check the data in RSA3 i am not getting RBKP ,RSEG ECC data through that datasource.
Do i need to do some settings.?
Edited by: joseph reddy on Jun 17, 2009 6:14 PMHi Rick,
we are also facing the same issue .
I had raised a message with SAP OSS & after a long follow up they came back with a reply saying.
Firstly;
For all invoice documents with an entry in table RBEX with
NOQUANTITY = 'X' the following quantity related keyfigures will be
initial
MENGE, BPMNG, BPRME, MEINS, WEMNG, REMNG, BPREM, BPWEM, PEINH, NETPR,
BSMNG, BPUMN, BPUMZ.
The indicator controls whether the quantity information should
be considered or not.
Because of this indicator all quantity related information as detailed
above is deleted during the recompilation run in subroutine
BW_SET_QUANTITIES (SAPLMRMBW).
Therefore these will not be available for invoice verification.
Secondly;
Invoice documents which have been posted before the activation of the
BW extraction do not have an entry in table RBEX.
Because of the missing entry in table RBEX the system does not delete
the above listed quantity related fields.
All invoice documents which have been posted after the activation of
the BW extraction are stored in table RBEX.
So goto transaction SE16 and select the entries in table RBEX.
Look at the CPU date (CPUDT) in table RBKP for the first
invoice document listed from table RBEX.
Any document from this date backwards will not have this data.
Can you please check if this explains why this data is not available.
If so this is the standard system behaviour and will not be changed.
This reply seems very very absurd & I am still not able to digest the fact that the Logic is so logicless.
SAP says you will not get any data records for any records posted before your extractor was activated.
SO if you started implementing BI say after 5 yrs of live ECC , then it means you wont get the data for those 5 years.
this seems so senseless.
Please update me if you find anything that works or any alternate solution.
/John -
Hello Gurus,
I am trying to setup 2lis_06_inv but i am not able to understand why i am not able to get any records in the setup table.The job shows finished in few seconds.
What can be the possible reason for this?
I activated the datasource using RSA5. I setup the Update Mode to 'Direct Delta' in LBWE ( Extraction Cockpit). I deleted the data in the setup table and then ran the OLI6BW tcode and gave tomorrow's date for finishing the job and then ran the job. The job shows finished in a few seconds but no data gets into the setup tables.
Error message in log says:
Recompilation has not selected anything -> Refer to error log
Message no. MRBW015
Diagnosis
This error message was issued for one of the following reasons:
No documents exist
No selection criteria were entered
BW updating has not been activated
Any help is deeply appreciated.Hi,
Check table RBEX on R/3 side whether any entries exists in that or not.
if it does not contain any entry it will not bring any data.
Check the link.
2LIS_06_INV Extractor problem
Regards
SH -
2lis_06_inv - No data when extracting delta information
Good day,
I did an initial extract from ECC for the 2lis_06_inv DataSource and the records where extracted, when executing a delta no records are extracted. Changes have been made on ECC but these no records are added to the delta queue.
I used transaction OLI6BW to fill the setup table and no errors where reported. I have checked table RBEX and there are 4 records in this table, these are the recored which where updated.
Does anybody know why the delta queue is not being filled ?
Any help would be appreciated.Hi Srinivas,
RSA3 returns 0 records.
The Job Control in LBWE is not set, and the update mode is Queued Delta.
if I have to set the Job Control Parameters, when do I set it, after the data has been extracted into BW ? after I have run the setup in ECC ?
Regards
Lucien -
No data comes when extracting data for 2LIS_06_INV
Hi,
I am trying to extract data from 2LIS_06_INV into my BI system.I see the invoice numbers in RSEG table as created from SRM 5.0 into my R/3 system but unfortunately no data gets extracted.Please provide some pointers if some setting needs to be done for the same.
JoyHi,
It is working fine I tried with out activating in LBWE.
Thanks!
Surendra. -
Data source 2LIS_03_BX is not getting displayed in LBWE
Dear All,
I was trying to extract MM data sources in R3 , I activated 2LIS_03_BF, 2LIS_03_BX ,2LIS_03_UM in RSA5 .After tat wen i tried to activate this data sources in LBWE only 2LIS_03_BF, 2LIS_03_UM are displayed under inventory.
please let me know how to get 2LIS_03_BX in LBWE
Regards,
DippyYou wont find data source 2LIS_03_BX in the LBWE screen.
We use this data source as a one time activity. you can directly activate the data soruce using the transaction RSA5 and delete the set up tables and fill the set up tables and initialize to extract the historical stock data.
2LIS_03_BX is not part of LO cockpit, hence you will not see them in LBWE. Pls use transaction code MCNB to load the setup table before you load data into BI.
rest of the data source you use OLI1Bw and OLIZBW to load the set up tables for BF AND UM.
Regards
KP
Edited by: prashanthk on Oct 5, 2010 5:33 PM -
Fields Missing In Maintenance TAB of LBWE
Hi Friends,
I have appended the data source 2lis_02_scl , I see my fields in the data source in rsa6, but in LBWE, in the maintenance TAB, when I try to pull my fields from Right to Left , I dont see my fields on Right hand side, Please clarify this, and also my question is do I have to write my CMOD and then pull the fields on Maintenance TAB??
Thanks and Early response will be appreciated.You cannot see the enhanced/appended zfiled in LBWE. You have to write code to ppopulate data to that filed.
Follow the below steps:
1)Go to RSA6 and find the data source you need to enhance.--> Display
2)Double click on the Extract structure.
3)Now click on the append structure button to add the required field on to the existing structure.
4) add your required fields with ZZ appended to your field.
5) Save & Activate the append structure. Then go back and make sure you activate the extract structure also.
6) Now again go back to RSA6 and select your Data Source. But this time go to change Data Source to remove the hide option to the enhanced fields. By default theyll be in hide mode. If you dont remove the hide field then this field will not be seen in BW side.
7) Now go to SE38 to write the logic to populate the data into the enhanced field. Program name to write the logic is ZXRSAU01.
8) Check + Save + Activate.
9) Check in RSA3 if data is populated as per your requirement.
10) Replicate your Data Source.
11) Now go to Data Source/ Trans. Structure screen. Now you can see the enhanced field on the right hand side.
Enhancements:
BW Side:
Go to CMOD.
1. To create new projectgive the project name create give Description  Save
2. Select the radio button Enhancement Assignment and give the Enhancement name you want and press Enter.
3. If the Enhancement is already assigned to some other project it will display the same message saying it is already assigned it some other project.
4. If the Enhancement is not assigned to any project Click on save.
5. Give RSR00001 (For Variable Exits)
6. Activate the Project.
7. Now go to Display  and click on the components button.
8. Now Double click on EXIT_SAPLRRS0_001. In that you can see an include ZXRSRU01.
9. Double click on that include, it will say program name ZX are reserved for includes of exit Functions groups.
10. Just Press Enter.
11. Itll Pop-Up a window saying Include ZX . Does not exits  Create Object.
12. That is where you have to write the code for the variable exits.
13. RSR00002  BW: Virtual Chars and Key Figures.
14. RSR00003  BW: Moving Characteristics.
R/3 Side:
Follow the above steps and the enhancement will be RSAP0001:
1. ZXRSAU01  Transaction Data
2. ZXRSAU02  Master Data (ATTR).
3. ZXRSAU03  Master Data (TEXT).
4. ZXRSAU04  Hierarchies.
Also check the below links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
also please see these threads
Enhancements
Re: enhancements
Good Luck -
Hi folks,
We got a an issue with the fields of standard LO DataSources.
When i have checked the LO SD datasources in LBWE maintanance, few fields are not existing in our Production system which are available in DEV server.
But i can see the total number of fields in the datasource are equal in all the servers i.e DEV as well as PROD servers.(I have checked in the RSO2 --> Extract structure of the standard Datasoources).
We are having the mappings for the fileds that are not seen in the LBWE on the BI side.
Please suggest me whether i can proceed further with this existing datasources or do i need to adjust the extract structure maintanance of PROD server in LBWE as per DEV server.
We are going live in few more days and came across this now after the transports to PROD,
Do we get any issues in the data loads with this differences in structure or can we neglect it?
Please give me your valuable inputs....
Thanks in advance...
KumudaHi Kumuda,
It is this way,
The Production and the Dev have to be in SYNC always PLUS the New Fields addition has to reflect.
1)First Check for the SYNC in RSA6 of Production and Development ,i.e RSA6>SAP-R3>SD-->Then Respective datasource.
They have to be in SYNC ,if not then that means some developemtn have been done to the Datasource by appending the Structure as part of Requiremnt.If the Structure has been enhanced then after repliaction of DS in BI-Dev the New fields will be avaliable in R3 and BI Dev only and not in BI or R3 Produciton, as they have not been transported.
If u have done any dvelopments to this DS,then the Prod and Dev have to match.
Come back with more clarity as to what is the excat siituation so that accordinly we can suggest what to do !!!!
Rgds
SVU123 -
LO Settings (in SBIW) for SD and Inventory before Customizing LO (LBWE)
Hi,
Please let me know the LO Settings(in SBIW) to be maintained in R/3 for SD, Inventory and
Purchasing before Customizing LO (LBWE).
i.e, for :
<u>SD</u>
1. Change statistics currency for each sales organization
2. Assign Update Group
<u>Inventory :</u>
1.Determine Industry Sector
2.Transaction Key Maintenance for SAP BW
3.Stock initialization
4.Plant view
Warehouse View
<u>Purchasing :</u>
1.Determine Industry Sector
2.Transaction Key Maintenance for SAP BW
Note : I am NOT looking for LO steps
Thanks
KishoreHi,
For sales & distribution steps are
1.t-code = sbiw
2. expand "settings for application specific datasource (PI)"
3.expand "Logistics"
4.expand "Settings: Sales & Distribution"
5.click on "IMG-Activity" of " Change statistics currency for each sales organization"
Now you can change according to your requirements.
Hope this helps.
Cheers.
Sukanya -
PO Qty and GR Qty is not coming for 2LIS_06_INV
Hi Expert,
I am trying to load data on 2lis_06_inv datasource but after filling the datasource, PO Qty(BSMNG) and GR Qty(WEMNG, BPWEM) fields does not contain any data but the invoice fields are contain data.
Thanks and Regards
Lalit KumarHi Expert,
I have already checked the data on R/3 side after filling the setup table and these fields are not
hidden that i've already checked but still those fields are not containing any data.
Thanks and Regards
Lalit Kumar -
Hi Gurus,
can we move the standard extract structure fields to the POOL in the maintanance option of the data source in LBWE Tcode
if not how to avoid those fields as we are getting error while activating the data source because of those fields
Plese help me
Thank youHi,
First check the Connections.. then
1. Delete Queues in SMQ1/LBWQ and RSA7.
2. If it is connected to BW server then better run delta it will clear Q in RSA7 (First step is enough)
Then goto LBWE and move POOL fields and save/activate it.
Thanks
Reddy -
Short dump error while filling setup tables for 2LIS_06_INV
Hi All,
I am trying to fill the setup table.While filling the stup table for 2lis_06_inv datasource, i got the Dump error after some time.
Error
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
plz can anyone help me out...Dear friends,
I tried it by giving the selection on fiscal year,but again same problem.If i give 1 0r 2 document numbers in selection then extractor works fine.
error:in detail.
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
Information on where terminated
Termination occurred in the ABAP program "SAPLMRMBW" - in "BW_RETRIEVE_DB_CO".
The main program was "RMCENEUR ".
In the source code you have the termination point in line 827
of the (Include) program "LMRMBWF01".
The program "SAPLMRMBW" was started as a background job.
Job Name....... "RMCENEUR"
Job Number..... 10524100
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "BW_RETRIEVE_DB_CO" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "SAPLMRMBW "; its source code begins in line
806 of the (Include program "LMRMBWF01 ".
806 FORM bw_retrieve_db_co USING t_mcrbkey_bv TYPE mcrbkey_t
807 t_mcrbkey_nbv TYPE mcrbkey_t
808 t_ekbe_acc TYPE t_ekbe
809 CHANGING t_mcrbco TYPE mcrbco_t.
810
811 TYPES: BEGIN OF s_target.
812 TYPES: table_left LIKE rbco.
813 TYPES: table_right TYPE rbex.
814 TYPES: END OF s_target.
815 TYPES: t_target TYPE TABLE OF s_target.
816
817
818 DATA: t_rbco_nbv TYPE t_target,
819 t_rbco_bv TYPE t_target,
820 s_rbco TYPE s_target,
821 s_ekbe LIKE ekbe,
822 s_mcrbco TYPE mcrbco,
823 l_index LIKE sy-tabix.
824
825 * Data source: invoice item non-background
826 IF NOT t_mcrbkey_nbv[] IS INITIAL.
*>>>>> SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i*
828 ON ( rmandt = imandt AND
829 rbelnr = ibelnr AND
830 rbuzei = ibuzei AND
831 rcobl_nr = icobl_nr )
832 INTO TABLE t_rbco_nbv
833 FOR ALL ENTRIES IN t_mcrbkey_nbv
834 WHERE r~gjahr = t_mcrbkey_nbv-gjahr AND
835 r~belnr = t_mcrbkey_nbv-belnr.
836 ENDIF.
837 * Data source: invoice item background
838 IF NOT t_mcrbkey_bv[] IS INITIAL.
839 SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i
840 ON ( rmandt = imandt AND
841 rbelnr = ibelnr AND
842 rbuzei = ibuzei AND
843 rcobl_nr = icobl_nr )
844 INTO TABLE t_rbco_bv
845 FOR ALL ENTRIES IN t_mcrbkey_bv
846 WHERE r~gjahr = t_mcrbkey_bv-gjahr AND
Thnks in advance -
Error while enhancing the Extract structure in LBWE
Hi All,
When I am trying to change the extract structure os logistic extractors in LBWE, it is giving me an error saying "Entries for application 11 still exist in the extraction queue".
Below is my scenario:
I have 3 clients in the same R/3 system, Client 010, 020 and 030.
Clients 020 and 030 are connected to my BW system. Client 010 will be used for all development while test loads can be done from clients either 020 or 030. Till now, I have tested my data flows only from client 030. Now, I have to add some extra field to the structure in LBWE but facing the above mentioned error.
I went into LBWQ in both the client 020 and 030 and deleted the queue and then tried to change the extract structure in client 010 but still the same error.
What else do I need to do to resolve this?
Thanks,
RPK.Hi Raki,
We are still in development phase. I did all my developments(R/3) in client 010. Till now I did only full loads to BW from client 030 and haven't done any loads from client 020. My BW system is also connected to another sandbox client 100 but I haven't done any loads from that client aswell.
As I have to add some extra fields to the extractor from LBWE, I did the follwing steps in R/3:
1) I have deleted the setup tables from client 010, 020 and 030.
2) Deleted the data from LBWQ from clients 010, 020 and 030.
3) Trying to change the extract structure by clicking on "Maintenance" for the extractor in Client 010.
At this point it is throwing an error.
I thought that the client 100 might be a problem as I have transfer rules created in my BW system from this source system as well. As I do not need this source system anymore, I have deleted it from BW and tried changing the structure in LBWE but still the same problem.
Any ideas would be highly appreciated.
Thanks,
RPK. -
Error: Sizing conflicts exists on the screen while scrolling in LBWE BI 7.0
Hi,
While using the transaction the LO Cockpit lbwe i am getting an error "Sizing conflicts exists on the screen;for more information see SAP Note 570861".But unfortunately it mentions about SAP 6.20 gui.I am using the SAP 7.10 gui.
Please let me know whether you have encountered a similar scenario.
Best Regards,
Dushyant.Hi,
I have a similar situation....
I load data from DSO 1 to DSO2....i run the DTP and look at the monitor after its green when i go to manage and activate i am seeing two requests instead of 1...i am not sure why...Can you guys tell me if there is any setting that needs to be taken care of.
Thanks,
Vinay.
Maybe you are looking for
-
I've repeatedly "tried again" over the past month with no luck. I'd rather not delete everything if that's what "repairing" the back disk involves.
-
I have been trying to resolve this for the past two weeks. I have been successfully importing Power Point slides into Captivate 1 for the last year. Although have not done anything different, Captivate is no longer importing the jpg logo (height 0.58
-
I am using DynamicPDF to render a PDF. There are multiple check boxes which are checked. When the PDF is opened in Firefox, none of the check boxes are checked. However, when I save the PDF and open with Adobe, check boxes are checked. There might be
-
Hello, I have an iMac mid 2011 with a 2TB HDD, Although I know it is possible to change out the hard drive, If I wanted to change to an SSD is there any paticular brand or method I have to use to avoid the temperture sensor problem I have heard about
-
any usb i have tried wont mount, it says dbus error org.freedesktop.dbus.error.noreply.......access denied i can access them in gnome, and as root, but even as root i cant change permissions. this happens in thunar dolphin pcmanfm, but not nautilus.