LBWE - Job Control drop back to "not maintained"

Hello,
I tried to Schedule Job Control to Hourly for 02 Purchasing. But once i check the job control again, i see it back to not maintained.
Please advise.

Hello Roberto,
Unfortunately, I see the red light "not maintained" additionally if i click on "start date" my previous settings are not there anymore.
How i am settings is:
immediate, then Check Periodic Job, set Periodic Values as Hourly and saving it.
If i open again for the session it is there, but if i relogin same day or next day it's gone.
This is for my all the 9 R/3 systems.
Please Help!

Similar Messages

Legal Control : Document Type Mapping not Maintained

Getting an error SAP GTS :Legal Control : Document Type Mapping not Maintained ,while creating order in feeder system .
I checked the configuration maintained SAP Global Trade ServicesSAP Compliance ManagementGeneral SettingsDocument StructureAssignment of Document Types from Feeder Systems-Assign Document Type at Feeder System Group Level
Similarly I checked for item category.
Please let me know what further configuration have to be maintained for correcting the error.
Thanks & Regards

Hi,
The document type mapping is required in R/3 system too. You have to maiatain order type say OR/TA in R/3 below path
IMG--> Sales and Distribution --> Foreign Trade/Customs --> SAP Global Trade Services - Plug-In --> Control Data for Transfer to SAP Global Trade Services --> Configure Control Settings for Document Transfer --> SDOA.
Note: If you maintain OR in R/3, you will have to maintain same in GTS. if you maintain TA in R/3, same maintain in GTS.
Regards,
Lakshmikanth

Browser back button not maintain selections on previous page?

Hi every one
1. The following is my code for a home page.
<h:form>
    <h:selectManyCheckbox value="#{home.value}">
         <f:selectItems value="#{brandItems}"/>
    </h:selectManyCheckbox>
    <h:commandButton action="#{home.display}" value="Submit" />
    <s:link value="view newxt page" action="#{temp.getAll}" view="/table.xhtml" />
</h:form>2. This is my session bean code
@Stateful
@Name("home")
public class TempAction implements Temp,Serializable
     private static final long serialVersionUID = 1L;
     String []value;
    @Out(required=false)
    List<SelectItem> brandItems;
     @Begin(join=true)
     public void getAll() {
          brandItems=new ArrayList<SelectItem>();
          brandItems.add(new SelectItem("First","First"));
          brandItems.add(new SelectItem("Second","Second"));
     public String[] getValue() {
          return value;
     public void setValue(String[] value) {
          this.value = value;
     public void display() {
          for(String a:value)
               System.out.println("________________"+a);
    @End
    public void reset() {}
    @Destroy
    @Remove
    public void destroy() {}
}3. I invoke getAll method by using following code in my pages.xml
After visiting the second page by clicking the s:link , I go back to the first page by using browser BACK button . Then when I hit the SUBMIT button, I get the following error message in my jboss console and also the check boxs are deselected.
16:29:05,843 INFO [lifecycle] WARNING: FacesMessage(s) have been enqueued, but may not have been displayed.
sourceId=j_id16:j_id17[severity=(ERROR 2), summary=(value is not valid), detail=(value is not valid)]Kindly assist to resolve this problem. Many thanks in anticipation.
By
Thiagu.m

Did you ever find a solution? I'm having this issue also.

LO-JOB CONTROL

hi,
What process takes place in jobcontrol at LO COCKPIT.?
URGENT
SRIDEVI

Hi sridevi,
V3 job control , you set the job control in back ground or immediately or after event, etc.
without set the v3 job control data doesn't come to deltaqueue.
V3 updates are serizes v3 update or unserized v3 update or queuedelta or direct delta.
Regards,
Ramesh

System not maintained

Hi Guys Can some one tell me how to switch our sytems to maintained. When I go into system data maintenance through the web browser and click on a system I do a consistancy check and the systems comes back as not maintained. What do I have to do to get this to a maintained state?
Thanks Mike

Hi Mike,
Check all SAP-OSS rfc is working or not. Give you proper admin s000* user id and password in login details. RFCs are SAP-OSS and SAP-OSS-LIST-O01, not SAPOSS, SDCC_OSS and SAPNET_RTCC. Then update data.
Second option, manually you can enter service.sap.com and maintain you system data manually.
Hostname, ip address etc.
Thanks,
Suman

CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED

dear all
i get this error when calculating production order cost
control data for activity type 1000\4230\1420 not maintained for fiscal year 2007
i hv maintained data in kp26
can any one pl help. i am learnign sap pp and hv 4.7 version
thanks and regards

Dear Anshuman
my prob. started during cost cal. in prod. order first error was version 0 not maintained for fiscal year 2007, THEN i maintained it in the path as told by you T code OKEQ.
but after that error changed to CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED ( 1000/4230/1420)
i maintained data in kp26, but the error is still coming
pl. suggest some solution as i am not able to proceed further.
Thanks and regards
Raj

Archiving control not maintained for CIR document .T-code MD82

Hi All,
I have archived sales order till 31/12/09 in the production system, but the Customer Independent Requirement that is
CIR documents (MD82) are also there in vbak table ,now i have closed all the open document by putting rejection reason.
When i am trying to archive the document it is giving the error "Archiving control not maintained for the document" .please
suggest where to maintain these archiving control and what is to be maintained.
Thanks and Regards
Abhilash Nayak

Hi,
Check your entries in tcode VORA.
Regards,
Eduardo

Error: Control parameters are not maintained in the current client

Hi,
We have recently installed IDES IS-H 6.04 - HEALTH CARE. In the SAP easy access menu when I go to Hospital>>Basic data administration>>Hospital structure>>Organizational Structure>>Organizational Unit>>Create it throws the following error message
"Control parameters are not maintained in the current client"
Any help on this would be greatly appreciated. I can't move ahead without getting to create an OU.
Warm Regards,
Prasoon Singh

Hi Prasoon
Are you starting from scratch?
Was the client created after the activation of IS-H?
For new installation I always recommend to activate the industry solution in client 000 and then to create the new clients as copy of 000. It will bring you the configuration of the Institution 0001. If not, it's very hard to do all the customizing, specially the SD ones.
It seams that you have nothing configured, try to do the copy, if not, probably an entry in transaction ON05 is missing.
I hope it helps
With best regards
Matías

Job control in LBWE

Hi gurus
can any body say the purose of chossing job control in LBWE .. what happens actually if we choose a date in that job control
Thanks in advance
regards
pradeep

Hi......
Check this link :
LOGISTIC COCKPIT DELTA MECHANISM - Episode three: the new update methods
Gist of LO Cockpit Delta
Job Control
Hope these helps you......
Regards,
Debjani......

HT1567 I have the volume control symbol in the center of my iPad all of the time. My music will not play and the volume remains off. When I try to increase the volume manually it statics and will not maintain a volume level. Thanks

I have the volume control symbol in the enter of my iPad all of the time. My music will not play and when I try to increase the volume manually, it statics and will not maintain a volume level. Thanks

Try resetting the iPad by holding down on the sleep and home buttons until the Apple Logo appears on the screen. Ignore the red slider if it shows up. You will lose no data.

Control Center II on MSI H67ma-e35 (b3) does not maintain a preset

hello guys,
as announced in the title
on my mother board H67 (actually on the other mobo 1155 that I own I have yet to install it), the CC II does not maintain the Green Power Genie preset...
or, I imposed at 75% but the next reboot, it always returns to Auto mode ..
Bios is set active to 75% too,
and I do not understand why it does not align to the same value by software ..

Quote from: HU16E on 22-June-12, 17:46:57
Sometimes software and utilities that run in Windows have a glitch or two. That is why many of us do all the setting changes in the BIOS manually.
for example on my great MSI P45 Diamond, the dual core center produces the "debug assertion failed" erroy almost every day....
in this case I learned that I click "ignore" and I continue my work

Job control in R/3 System

Guys,
I have a question about Job control on LBWE screen. When I click on it. It gives user multiple options. Those options are self explainatory. However, I would like to know for instance if I schedule a job to start at 2:00 PM on November 1st, 2008. The data that is in the setup tables will be sent over to BW system on that date/time?
Thanks,
RG.

Hi Ram,
The jobs that you schedule in LBWE are not for moving data from setup tables. The process works like this. First you load the setup tables and load an INIT into BW. then, an init pointer appears in RSA7. That is Delta queue. On the R/3 side when the documents are posted, they are queued in the extraction queue (LBWQ). The job that you schedule using LBWE moves the data from LBWQ into RSA7. When you load the delta, the data in RSA7 is moved into BW system. Hope it helps.
Thanks and Regards
Subray Hegde

Job control

Hello gurus.
We need to deactivate the job control in R/3 prod. We are enhancing some cubes in BW. Last week we went to lbwe and clicked on jobcontol to stop the job. After deleting the dates, we just came back...but today when i checked the job started and ended...How to stop the job permanently. The program name is
RMBWV302
RMBWV311
RMBWV312
RMBWV313
REgards
Rak

hi,
You can to find out your job in SM37, in BW goto Monitor screen and copy the Job Name (from Header tab) and goto SM37 and give the job name and if you know the user give or else give * and set timings and execte, now you can get your job.In R/3 also you can see the same thing, but in R/3 in SM37 you need to give job name is *<job name> but you need to delete job name upto _ (under scoor).
or also you can go to sm50 and click on process and cancel without core
watch this link.
Re: Job detail
Shreya

WMP300N's not maintaining connection to WRT300N

I have two WMP300N's connecting to a WRT300N via wireless, and several computers that connect via CAT-5. The WRT300N has DHCP enabled.
The computers connected via wire get an IP address just fine and everything in that regard is working fine.
The two computers connecting wirelessly are both a very short distance from the WRT. Both report "Excellent" signal strength (84% or better). And both of them CONSTANTLY lose their connection to the WRT about ever 2-3 minutes, then go through a period of reconnecting and getting reassigned an IP address. In the meantime, of course, any tcp connection I have established with a remote site stalls until the wireless computers can get their IP address back.
I have the latest firmware on the WRT, and the latest drivers on the WMPs.
Why are these wireless connections to flaky and, more importantly, what do I need to do to get a stable wireless connection established and maintained?
Is the "N" protocol still a garbage spec? Do I need to force it to drop back to an 11g connection to get something reasonably stable?

Hi
As you are facing frequent connection dropping issues, first of all make sure you hardwire one of your computers directly with your router, then launch Internet explorer and clear address bar and type in 192.168.1.1 and password as admin and then click ok.
Click on wireless tab and then change Radio band to Wide – 40MHz channel, Wide channel to 9 and standard channel to 7 or 11. Now check the connection. If you get good connection without dropping then no issues, but if not then again enter the router setup page and click on wireless tab and then click on sub tab Advanced wireless settings, reduce Beacon interval to 75, RTS Threshold to 2307 and Fragmentation Threshold to 2306 and save settings and now check the connection.

Disable remote control IR receiver is not showing up in system pref.

My remote for my iMac is not working. I originally thought it neeeded a new battery but that was not it. I had a power outage the other night and since then have been noticing the problem.
The apple support says;
'To turn on IR reception:
Open System Preferences and click Security.
Deselect "Disable remote control infrared receiver.'
When I go to system preferences and then security, the option to 'disable remote control infrared receiver' does not show up.
Yesterday I restarted and the option came back, this morning after turning my computer on it wasn't there again. Any idea how to resolve this problem for good?
Thank you
Dan

The next time you notice the line gone from the System Preferences, open up your System Profiler (from the /Applications/Utillities/ folder) and check to see if the "IR Receiver" is listed under the USB section in Hardware.
If it doesn't appear there, then perhaps you're having some kind of failure of your receiver? If it does appear there, then it would seem more likely that you're having some kind of preference file or setting problem.
-Doug

LBWE - Job Control drop back to "not maintained"

Similar Messages

Maybe you are looking for