Lbwe Transaction

Can any one explain me, what exactly lbwe transaction works ?
Thanks in advance,
SAP Fan

hi Lbwe is the main transaction which is used in the LO extraction(Logistics Extraction).2lis_11_vahdr this extract structure isa combination of R/3 Tables.over here we can choose which we want during the extraction.
Three tasks are performed here.
1.maintenence of structures.
2.generation of structure.
3.status and job control.
this is the Transaction mainly used the BIW Consultants for configuring and implemention LO scenarios

Similar Messages

  • LBWE transaction help

    Hi,
    In LBWE transaction, when we click on Maintenance we can see all the fields but on LHS we can see some fields are in Blue color...what is the significance of it?

    Dear Sohil,
      In LBWE maintenance of your extract structure you will be having left and right panes.
    Left pane consists of what are all the mandatory fields for that data source.
    Right pane consists of all the fields of the communication structures associated with the datasource.
    If you have a requirement of a field but dont find in the right pane then you can go with enhancing the datasource by using
    rsap0001 enhancement.
    Hope it helps.

  • LBWE TCode as Display in ECC 6

    Hi All
    I am BW developer and had a question regarding security. We are implementing BW and want to know whether we can make LBWE transaction in ECC6 as a display. As this helps us to do configuration for Logistics, we dont want any one to make changes to the extract structure and also datasource. If we can restrict it to display then how is it possible?

    Hi,
    > I am not sure if this transaction can be made display only as there is no authority-check statement in the program.
    The program does however make several calls to function modules which have authority-check statements in them and the program can also react to the exceptions raised when the authority-check fails.
    Whether restricting authorizations will achieve a display version of the transaction I don't know (there is a lot of functionality in there, including scheduling of background jobs), but there are authority-checks and other security mechanisms.
    I think you will need to test it (also in combination with client and system settings, also known as "system closed" or "client closed" for customizing changes). The authorization-checks seemed to have a particular focus on deletion, from what I could tell.
    As JAI mentioned, ask an ABAPer to take a look at it (also before you go for the user-exit option) to see what your options are.
    Kind regards,
    Julius

  • Data source setting in LBWE

    Hello Guys,
    In  the Tcode LBWE job maintainence for collective update ie job control is showing as not maintained in both the Dev and production R3 system. but still i am able to load the data on daily basis using the 02 and 011 datasources. the Queued Delta update mode is used  for this datasources.
    My concern is
    1. do we need to schedule the job in the LBWE transaction are it is taken care by the system authomatically.
    2. Is my system is behaving strangely.
    3.suppose if i want to change the Process chain of this deltas from monthly to weekly do i need to schedule this jobs again in R3
    Regards

    I am getting the records in the deltas. when i check in the R3 production its showing that the job control under start date as not maintain and in red colour. when i check the deltas daily the records are varying.
    wheather the V3 load is schedule daily. if it is not schedule then i hav to get the zero records in the delta right .
    or the V3 job is schedule daily and the transaction load is running on weekly or monthly basis and how can i identify V3 job schedule status.
    Pls explain me abut the above scenario.
    Edited by: priya k on May 21, 2009 1:42 PM

  • LBWE : Logistic cockpit:  Help needed

    Hi All,
       I wish to know whether you have any documentation (pdf) etc available to understand the scope of LBWE transaction.
       For example, I would like to know
       1> How do I change the datasource/underlying prog to add/change/delete some field from the standard delivered logistic datasources for Sales, delicery and billing(2LIS_11, 2_LIS_12 and 2LIS_13* ).
       2> All I know is trandsaction RSA5, RSA6 enables the data source and data extraction to BW. I am not quite getting the point for the transaction LBWE.
       Thanks
    Arunava

    hi,
    check Roberto's weblog
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it

  • Enhance standard 2LIS_17 extractors in an operative SAP R/3

    Hi experts,
    I need your help in a special activity that I need to do, I'm going to enhance the 2LIS_17_I3HDR to include some standard fields through LBWE transaction, the complication that I see in my future is activate the delta extraction, because the source system is operative and the plants works 7x24, what you recommend us to do this activity in the better way, preventing that some orders don't get lose in the extraction. 
    How can I proceed to do this and have low impact?.
    Thanks for your help.
    Regards

    Hi ,
    first let us know how want data for added fields?
    want historic data or not?
    One more thing in case LO.
    User lock is mandatory.
    if we do the transports without lock then next delta pointer will be corrupted due to extract structure changes. so you may loose those records which are created/changed in time gap.
    Better to have user lock on ecc system/related t codes.
    later to do the transports and follow other steps as per need
    Situation: if you need historic data
    1. you need user lock as per you source data volume.
    at bw side need to delete whole data and reload.
    so here, you need to delete setup tables data and fill whole data.
    run full load with init.
    later you can do unlock and continue with delta loads.
    situation: don't need historic data then
    need user lock at minimum time.
    clear all delta queues from ecc and move to bw.
    later you can do you can transport changes to ecc prod and bw prod.
    later you can do unlock and continue delta loads.
    Thanks

  • Load R/3 SD data in BW on delta basis in stead of full load.

    Hi,
    At present we load SD data from R/3 to BW on full load basis. But we need to change it from full load to delta load. Can anybody shed some light on the subjects.
    Thanks in advance
    Imran

    Hi,
    Welcome on board.
    There are so many threads relating to your query. Please do some search.
    There are some good blogs written by Roborto. you can find them in BLOGS.
    For sales you have application component 11,12,13 in the LBWE transaction in ECC. All the datasources are delta capable.
    Thanks
    Srikanth

  • How to get the history data from r3?

    Hi Experts,
    I have loaded stock data for jan through the flat file load.
    The stock consists for 2,9,16,23,30 th dates of Jan.
    Remaining dates stock came from R3.
    so problem is stock seems double(Not exactly) for one site(Plant).
    i checked in BI and i dont see any stock data for 31st Jan but it is there in R3.
    So how to get the data for 31st jan from R3 it is using the 2LIS_03_BX Extractor (Tables - MSEG,BSEG).
    i am really stuck up here please help me out..
    Thanks in advance,
    Regards,
    <BMP>

    You can get it from LBWE transaction in R/3 side:
    for example see below:
    Sales and Distribution (SD)          :  application 11, 13, 08 (in LBWE T-code)
    Materials Management (MM)        :  application 03, 02
    Logistics Execution (LE)               :  application 12
    Quality Management                  :  application 05
    Plant Maintenance (PM)              :  application 04, 17
    Customer Service (CS)               :  application 18
    Project System (PS)                   :  application 20
    SAP Retail                                    :  application 40,43,44,45

  • How to synchronize 2LIS_03_BX and 2LIS_03_BF

    Dear Experts,
    I have read how-to-guides which title: How To…Handle Inventory Management Scenarios in BW
    Now on page 6, which has a red print out saying:
    "restrictions for posting date or the material document number you only select those material documents that have created the opening stock (step 1)."
    We have some constraints with R3 productions, they are:
    1. R3 production is 24/7 so posting block is not allowed
    2. MCNB to fill setup table for 2LIS_03_BX runs for 4 hours.
         It has run from April, 16th 09:00 AM till April 16th lunch time (Approximately 13:00 PM).
    Then I have to run OLI1BW which is to populate 2LIS_03_BF. Here lies the problem:
    How can I know which posting date / material number documents are already contained in the current stock (Step 1) ?
    Many Thanks and Points will be awarded !
    BWAS

    Hi,
    Check in SDN..
    Setting up material movement/inventory with limit locking time
    Re: Business Content LO Data Source 2lis_03_bx not coming in LBWE transaction
    Re: Help required for filling the Setup Table (2LIS_03_BX)
    Thanks
    Reddy

  • How to do delta loading in BI?

    Hai..
    I sheduled the one job in the LBWE transaction. I deleted the contents of setup table and again filled the same and checked the data source in RSA3 and found data there. Then I replicated the data source in BI 7.0. After this thing How to perform delta loading in BI side.
    As here we are using Infopackage for loading PSA alone.
    1.  <b>Where we do delta initialisation and delta load?</b>
    2. <b>how the data is getting loaded in R/3 while doing delta update?</b>

    Hi Methew,
    After triggering V3 job from LBWE , go to Tcode RSA7 in r/3
    You will find for your datasource some data packet are available in delta Queue.
    Now you have to create a infopackage  in BW for init
    1)Go to left top of the infopackage  click on Initialization of source system ( there should be no request) if you find any request delete it.
    2)Click on update tab and select Initialization delta process.
    3)Data selection would be in gray ( no selection)
    4)Process can be any .
    5)Select your data target.
    6)Click on start button from schedule tab.
    Once int is done create a new info package for delta .
    1)Click on update tab and select delta updtes.
    Hope this helps.
    Milan Kothari
    9822840385

  • Set up table data extracted from R/3 not visible in data target of BW

    Hai friends,
             I am currently working on extracting data from R/3 to BW. I read the several docs given in the forum and did the following:
      1) In the LBWE transaction, my extract structure is already active.
      2) In SBIW, i went to the filling of set up tables for QM
      3) I executed the set up table extraction
      4) Then, i checked in RSA3. The extraction was successful.
      5) In BW, i replicated the datasource, and in  the infopackage, i selected in the  
          PROCESSING TAB, "PSA and then into Data targets (Package by Package)
      6) In UPDATE tab, i selected FULL UPDATE
      7) And then i did immediate load.
      8) In RSMO, it showed successful. (It showed the same number of records as in the
          RSA3 of R/3)
              But when i went into the data target (ODS) and checked for its contents, nothing is visible. Why is it so? HAve i skipped any step? Please help.
    Regards,
    Neha Solanki

    Hai,
           U r rite. It is an NW2004 system.This is what is displayed in the status tab in RSMO.
    Data successfully updated
    Diagnosis
    The request has been updated successfully.
    InfoSource : 2LIS_05_QE2
    Data type : Transaction Data
    Source system: QAS678
       And i can find no such button as u said.
    Regards,
    neha Solanki

  • Enhancement fields from ekko - LIS extractor

    Hi,
    I append in structure MCEKKO two fields (RLWRT and FRGRL from the EKKO table) but in order to come up these fields include in others releases and conflicts can be generated, I put them a "zz" at the beginning but preserving the data type.
    Then in LBWE transaction I added these fields using arrow buttons provided and I understand there is no need to write user exit code to populate these new fields.
    Then the data source is activated with the changes.
    When I simulate 2LIS_02_HDR with the RSA3 transaction, these fields do not fill.
    The ZZ at the beginning would be the problem? What could be?
    I appreciate your help,
    Regards,
    Victoria

    Hi Subray,
    When I remove the ZZ a warning is showed.
    "Field RLWRT does not lie within customer namespace."
    But the activation is permitted.
    This is the procedure:
    "If they are new fields or fields which are only used in structures, you are recommended to change the field names and the reports which access them."
    "The field name for fields of database tables cannot be changed without the corresponding data being lost. It is only necessary to change the field name if the same name is used by SAP."
    But the field is the same by SAP, because is the same. :S
    Message was edited by: Victoria León

  • Help in Plant Maintenance

    Hi all,
    I am trying to load data into 0PM_OM_OPA_1(Maintanence Orders and Costs Allocations) Business Content Cube without any enhancements.The Datasource corresponding to this cube is 0PM_OM_OPA_1 and 0PM_OM_OPA_2 for which i couldnt find any extract structure in LBWE transaction.
    so far,
    1)I have activated 0PM_OM_OPA_1 and 0PM_OM_OPA_2 datasources in RSA5.
    2)Deleted the set up tables corresponding to PM.
    3)Reconstructed the BW structures in OLIIBW.
    4)But LIS set up log says that 0 documents are posted.
    5)RSA3 extractor checked gives me 240 records.
    When i try to execute the infopackage in the BW system, it says Error in Source System..at extractor level.
    Are there any Best Practices document for Plant Maintenance cubes in marketplace?
    Please help me out...
    Regards
    Amith

    Hi,
    i think
    check once RFC connections......
    may source not connected to BW system..
    hope this help
    raj

  • Extractor technical name

    For LO extraction wat type of extractor we will use and give the technical name for that
    chandu

    Hi Chandra,
                      Usually for LO Extraction for standard content we will be having the datasources it self acts as an extractors.To find LO Extractors you can goto LBWE transaction in ECC(R/3).
    Hope this helps,
    Regards
    Karthik

  • 2LIS_03_S195 datasource

    Hi,
    Please let me know the complete extraction process(Process from R3 to BI) for 2LIS_03_S195 datasource as this is not available in LBWE transaction.
    I had activated the datasource and i checked in LBW1 and activated the delta. Stuck on how to proceed next
    (Points guaranteed)

    Try this........
    LIS EXTRACTION
    T.code - :MC18 u2013 create field catalog
    1. Characteristic Catalog
    Application-01-Sales and Distribution, 02-Purchasing, 03-Inventory Controlling, etc..
    Catalog category 1. Characteristic catalog, 2. Key figures catalog 3. Date catalog
    Select characteristic catalog and enter, click on characteristic select the source table and it will be display the relevant source field and select the source field, copy + close, copy.
    Save, similarly create key figures catalog
    T.code : MC21 u2013 create infostructure
    Example u2013
    Inforstructure : S789
    Application u2013 01
    Choose characteristic select the catalog, select the fields, copy + close
    Choose key figures catalog select the key figures ,copy + close, save and generate
    T.code u2013 MC24 u2013 create updating
    Infostructure : S789
    Update group : 01- Sales document, delivery, billing document ,enter
    Select the key figures click on rules for key figures give suggest rules, copy save and generate
    Click on updating (activate updating)
    Select the infostructure set periodic split 1. Daily, 2. Week, 3. Month, 4. Posting period
    Updating u20131)No updating,2)Synchronous updating (V1), 3)As synchronous updating (V2), 4)As synchronous updating (V3),
    T.code u2013 LBW0 - Connection of LIS Information structures to SAPBW
    Information structure : S786
    Select the radio button-Setup LIS environment and Execute.
    Select the radio button-Generate data source and Execute.
    For Delta update:
    Select the radio button-Generate updating and Execute
    Select the radio button -Activate / deactivate and Execute.
    T.code u2013 SBIW u2013 Display IMG (implementation guide)
    Setting for applications specific data source u2013 logistics u2013 Managing transfer information structure u2013 setup of statistical data u2013 applications specific setup of statistical data u2013perform statistical setup u2013 sales.
    Choose activity
    Setup u2013 Orders, deliveries, billing
    Choose the activities enter the infostructure (S789), give name of the run, date of termination, time of termination, No. of tolerated faulty documents. Then execute
    T.code u2013 RSA3 u2013 Extractor checker
    Give the data source name eg. 2LIS 01S789 and execute, result will get some records
    Go to BW side replicate data source u2013 Assign infosource u2013 Create infocube u2013 Create update rules u2013 create infopackage and schedule the package with initialize delta process.
    For delta update :
    In R/3 side
    T.code u2013 MC25, set update (V1) or (V2) or (V3)
    T.code u2013 LBW0, choose generate updating and execute then choose activate / deactivate and execute
    BW side - create infopackage and schedule the package with delta update.
    First time if your scheduling the infopackage -in R/3 side T.code :MC25 -Udating set to No update,insted of selecting the update V1,V2,V3.
    If your doing the Delta update:in R/3 side T.code :MC25-Updating set to either V1 or V2 or V3. and the to T.code :LBW0 -Select the radio button Active/deactivate and Execute.
    and schedule the infopackage with delta update.
    Cheers,
    Neel.

Maybe you are looking for