LC/0/0/CPU0:Dec 19 00:48:55 : lda_server[64]: %L2-SPA-5-OIR_ERROR : SPA (0): A SPA hardware or software error occurred on ASR9001

Dear all,
i got the problem, suddently my customer router generating that log :
LC/0/0/CPU0:Dec 19 00:48:55 : lda_server[64]: %L2-SPA-5-OIR_ERROR : SPA (0): A SPA hardware or software error occurred,
is it the line card is error, and need to be rma ?
or is there any wrong configuration, or need to be upgraded with FPD.
the IOS XR version is 4.2.3
Thanks,
Budi L

Hi Alexei,
here's the log and show hw-module fpd.
LC/0/0/CPU0:Dec 19 00:48:55 : lda_server[64]: %L2-SPA-5-OIR_ERROR : SPA (0): A SPA hardware or software error occurred, please contact technical support  
RP/0/RSP0/CPU0:Dec 19 00:48:55 : invmgr[254]: %PLATFORM-INV-6-NODE_STATE_CHANGE : Node: 0/0/0, state: FAILED
LC/0/0/CPU0:Dec 19 00:48:56 : vic_0[363]: %L2-ETHERNET-6-MTU_NEAR_HW_LIMIT : The configured MTU of 9216 on GigabitEthernet0_0_0_14 is close to the H/W limit, and hence large 802.1Q or QinQ frames may be dropped as oversized frames
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/19, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/19, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/18, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/18, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/17, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/17, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/14, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/14, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/13, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/13, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/12, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/12, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/11, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/11, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/10, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/10, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/9, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/9, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/8, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/8, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/7, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:56 : ifmgr[201]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/7, changed state to Down
LC/0/0/CPU0:Dec 19 00:48:58 : rsi_agent[318]: %OS-RSI_AGENT-6-CARD_ROLE_CHANGE : Based on the card configuration/type, the AFI IPv4 role of the card has changed from Standard to Customer Facing
LC/0/0/CPU0:Dec 19 00:48:58 : rsi_agent[318]: %OS-RSI_AGENT-6-CARD_ROLE_CHANGE : Based on the card configuration/type, the AFI IPv6 role of the card has changed from Standard to Not Interested
RP/0/RSP0/CPU0:Dec 19 00:48:58 : invmgr[254]: %PLATFORM-INV-6-NODE_STATE_CHANGE : Node: 0/0/0, state: UNPOWERED
RP/0/RSP0/CPU0:Dec 19 00:49:02 : invmgr[254]: %PLATFORM-INV-6-NODE_STATE_CHANGE : Node: 0/0/0, state: DISABLED
RP/0/RSP0/CPU0:CG-PE-05(admin)#show hw-module fpd location all
Wed Dec 19 05:25:10.591 WIB
===================================== ==========================================
                                      Existing Field Programmable Devices
                                      ==========================================
                                        HW                       Current SW Upg/
Location     Card Type                Version Type Subtype Inst   Version   Dng?
============ ======================== ======= ==== ======= ==== =========== ====
0/RSP0/CPU0  ASR9001-RP                 1.0   lc   fpga2   0       1.12     No
                                              lc   cbc     0      22.114    No
                                              lc   rommon  0       1.29     No
0/RSP0/CPU0  ASR-9001-FAN               1.0   lc   cbc     2      24.114    No
0/0/CPU0     ASR9001-LC                 1.0   lc   cbc     0      23.114    No
                                              lc   fpga2   0       1.15     No
                                              lc   fpga4   0       2.06     No
                                              lc   rommon  0       1.30     No
0/0/0        A9K-MPA-20X1GE             1.0   spa  fpga3   0       0.08     No
Thanks,
Budi L

Similar Messages

  • Filtering debug to syslog

    cisco 2651xm router
    IOS: c2600-adventerprisek9-mz.124-15.T9.bin
    I run a sip trunk on my router and I've been monitoring my sip calls to syslog using 'debug ccsip calls' for a day, the log was going fine and suddenly the log is filling up with hundreds of entries as follows:
    Oct  2 18:11:09 172.16.1.30 19496: .Oct  2 17:11:11.952: %LINK-4-TOOBIG: Interface ATM0/0, Output packet size of 1506 bytes too big,  -Traceback= 0x814F13E4..(lots of numbers).
    I see it's to do with the ATM0/0 port which corresponds to the adsl card I use in the router and I recognise 172.16.1.30  as Vlan1. There's no regular time pattern between entries.
    What does this entry actually mean?
    Is there a way to configure the debug so it doesn't send these particular messages to the log?
    Thanks for any pointers.

    Hello, according to Cisco.com:
    %LINK-4-TOOBIG: Interface [chars], Output packet size of [dec] bytes too big
    An internal software error occurred.
    Recommended Action: Copy the message exactly as it appears on the console or in the  system log.  Research and attempt to resolve the issue using the tools and utilities  provided at
    http://www.cisco.com/tac.  With some messages, these tools and utilities will supply clarifying  information. Search for resolved software issues using the Bug Toolkit  at  http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl.  If you still require assistance,  open a case with the Technical Assistance Center via the Internet at
    http://tools.cisco.com/ServiceRequestTool/create/,  or contact your Cisco technical support  representative and provide the representative with the gathered  information.
    Related documents- No specific documents apply to this  error message.
    It seems that there is an internal software (IOS) error. From my personal experience it may be that a router reload can fix this error.
    Calin

  • Error while configuring Facet dimension as a Month (Jan..Dec)

    Dear All,
    In SAP BusinessObjects Explorer, I am getting the attached error when I choose to display a dimension 'Month' ( contains values 'January', 'February' .. , 'December') as Dimension with 'Month ( Jan to Dec)'.
    The error message is as below :
    The prompts module failed to initialize.
    Server error occurred while analyzing the prompt. (PS 50201)
    Details : The creation of the prompt input session failed.
    No objects have been modified or deleted in the universe.
    The current System configuration is
    BI 4.0 SP6
    Database: Sybase ASE 15.5
    I followed the below process :
    1. Go to 'Manage Spaces'
    2. Select the universe
    3. Select the explorer and click on 'Index Now'.
    4. After indexing is successful, select 'Configure'
    5. Go to the 'Objects' tab and add the dimension 'Month' from the universe as a Facet.
    6. Select the facet 'Month' and under the Details section, in Dimension drop-down; select 'Months (Jan..Dec)'
    7. click on Validate
    Thanks and Regards,
    Prathmesh

    Hi Nakul,
    Below is the overview
    Database Level : datatype is Date
    Universe : extract the month and using 'case.. when' convert it to respective month names as January, February, March etc
    Explorer Level : I have 2 dimensions as 'Month_Name' (derived month name form date) and 'Date' ( the date column)
    The 'Date' dimension only lets me choose 'Standard' option while the others are disabled
    The 'Month_Name' dimension lets me choose the 'Month ( Jan to Dec)' option but gives the error.
    I hope this explains my scenario
    Thanks and Regards,
    Prathmesh Pai

  • Business Rules- Two Decision Services (.decs) on the same composite

    Hello.
    I have a composite where i designed a rules dictionary (.rules) and created a decision services metadata(.decs). This decision service declares the corresponding decision function for which it was created a .WSDL for invocation via web service. The decision function receives an object called 'document' with name space '..../document'.
    I can invoke the decision service via soapUI and receive the expected results.
    Then I created another rules dictionary (.rules) and other decision services metadata(.decs). This decision service declares another decision function for which it was created another .WSDL for invocation via web service. The decision function receives an object called 'notificationDecisionFact' with name space '..../notificationDecision'. The notification decision is an xml element composed of other types like 'document', 'workTask', among others.
    When i tested the first decision service again (the one previosly working) i obtain an error saying something like:
    unexpected element <{.../document} document>. The expected elements were <{.../workTask} workTask>,<{.../workTaskRequest} workTaskRequest>
    But when i came to jdeveloper and disable the option 'invoke as a webservice' on the second decision function (eliminating the corresponding WSDL) the first decision service comes back to normal functioning.
    I don't have any ideia why the service/work memory/BR engine is expecting that elements when i have two WSDL from different rules dictionary. The xml facts for both dictonary were constructed from the same set os XSD, but the WSDL seems to appear correct with the properly element types and namespaces.
    Is there any issues regarding with two cecision services (.decs) on the same composite?
    Any help would be very appreciated.
    Thanks in advance!
    Best Regards.
    Bruno Silva

    I am calling the stateless operation.
    This is the stack trace of the error from the server diagnostics:
    2011-12-30T13:45:43.929+00:00] [AdminServer] [ERROR] [] [oracle.soa.services.rules] [tid: [ACTIVE].ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JIFE1AxFw000jzwkno1EzPhx0001Sr,0] [WEBSERVICE_PORT.name: IDecisionService_pt] [APP: soa-infra] [composite_name: Workflows] [component_name: ProcessInitiationRules] [component_instance_id: 9f7bbe05-05d6-4cde-a589-0604cb7bd579] [J2EE_MODULE.name: fabric] [dcid: 11d1def534ea1be0:6ebcb03b:1348eaaf001:-7fd1-000000000000043a] [WEBSERVICE.name: ProcessInitiationRules_InitiationDecisionService_ep] [J2EE_APP.name: soa-infra] [composite_instance_id: 250012] <.> Error while executing the rule session.[[
    The rule session 250012 failed to execute.
    Check the underlying exception and correct the error. If the error persists, contact Oracle Support Services.
    Error while executing the rule session.
    The rule session 250012 failed to execute.
    Check the underlying exception and correct the error. If the error persists, contact Oracle Support Services.
         at oracle.bpel.services.rules.rpi.AbstractDefaultRuleSession.execute(AbstractDefaultRuleSession.java:272)
         at oracle.bpel.services.rules.rpi.oracle2.OracleRuleSession.execute(OracleRuleSession.java:270)
         at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:331)
         at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:634)
         at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
         at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
         at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:155)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy294.request(Unknown Source)
         at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java:1169)
         at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:768)
         at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
         at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1168)
         at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:996)
         at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:562)
         at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:222)
         at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:185)
         at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:430)
         at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:477)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: javax.xml.bind.UnmarshalException: unexpected element (uri:"http://www.edp.pt/schema/common/gdoc/document", local:"document"). Expected elements are <{http://www.edp.pt/schema/common/gdoc/workTask}workTask>,<{http://www.edp.pt/schema/common/gdoc/workTask}workTaskRequest>
         at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallingContext.handleEvent(UnmarshallingContext.java:616)
         at com.sun.xml.bind.v2.runtime.unmarshaller.Loader.reportError(Loader.java:244)
         at com.sun.xml.bind.v2.runtime.unmarshaller.Loader.reportError(Loader.java:239)
         at com.sun.xml.bind.v2.runtime.unmarshaller.Loader.reportUnexpectedChildElement(Loader.java:116)
         at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallingContext$DefaultRootLoader.childElement(UnmarshallingContext.java:1022)
         at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallingContext._startElement(UnmarshallingContext.java:452)
         at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallingContext.startElement(UnmarshallingContext.java:433)
         at com.sun.xml.bind.v2.runtime.unmarshaller.InterningXmlVisitor.startElement(InterningXmlVisitor.java:71)
         at com.sun.xml.bind.v2.runtime.unmarshaller.SAXConnector.startElement(SAXConnector.java:137)
         at com.sun.xml.bind.unmarshaller.DOMScanner.visit(DOMScanner.java:240)
         at com.sun.xml.bind.unmarshaller.DOMScanner.scan(DOMScanner.java:123)
         at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(UnmarshallerImpl.java:314)
         at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:297)
         at oracle.bpel.services.rules.rpi.JAXBFactUnmarshaller.unmarshal(JAXBFactUnmarshaller.java:91)
         at oracle.bpel.services.rules.rpi.internal.AbstractPatternConverter.convertList(AbstractPatternConverter.java:658)
         at oracle.bpel.services.rules.rpi.internal.AbstractPatternConverter.convertParameterList(AbstractPatternConverter.java:446)
         at oracle.bpel.services.rules.rpi.internal.CallFunctionStatelessConverter.convert(CallFunctionStatelessConverter.java:110)
         at oracle.bpel.services.rules.rpi.AbstractDefaultRuleSession.execute(AbstractDefaultRuleSession.java:247)
         ... 45 more
    [2011-12-30T13:45:43.971+00:00] [AdminServer] [ERROR] [] [oracle.soa.services.rules] [tid: [ACTIVE].ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JIFE1AxFw000jzwkno1EzPhx0001Sr,0] [WEBSERVICE_PORT.name: IDecisionService_pt] [APP: soa-infra] [composite_name: Workflows] [component_name: ProcessInitiationRules] [component_instance_id: 9f7bbe05-05d6-4cde-a589-0604cb7bd579] [J2EE_MODULE.name: fabric] [dcid: 11d1def534ea1be0:6ebcb03b:1348eaaf001:-7fd1-000000000000043a] [WEBSERVICE.name: ProcessInitiationRules_InitiationDecisionService_ep] [J2EE_APP.name: soa-infra] [composite_instance_id: 250012] <.> [[
    oracle.fabric.common.BusinessFaultException
         at oracle.bpel.services.rules.rpi.AbstractDefaultRuleSession.execute(AbstractDefaultRuleSession.java:272)
         at oracle.bpel.services.rules.rpi.oracle2.OracleRuleSession.execute(OracleRuleSession.java:270)
         at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:331)
         at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:634)
         at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
         at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
         at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:155)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy294.request(Unknown Source)
         at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java:1169)
         at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:768)
         at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
         at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1168)
         at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:996)
         at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:562)
         at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:222)
         at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:185)
         at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:430)
         at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:477)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    [2011-12-30T13:45:43.977+00:00] [AdminServer] [NOTIFICATION] [] [oracle.wsm.agent.WSMAgent] [tid: [ACTIVE].ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JIFE1AxFw000jzwkno1EzPhx0001Sr,0] [WEBSERVICE_PORT.name: IDecisionService_pt] [APP: soa-infra] [J2EE_MODULE.name: fabric] [dcid: 11d1def534ea1be0:6ebcb03b:1348eaaf001:-7fd1-000000000000043a] [WEBSERVICE.name: ProcessInitiationRules_InitiationDecisionService_ep] [J2EE_APP.name: soa-infra] Message Type is normalized, exiting agent.processFault()
    [2011-12-30T13:45:43.978+00:00] [AdminServer] [NOTIFICATION] [] [oracle.wsm.agent.WSMAgent] [tid: [ACTIVE].ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JIFE1AxFw000jzwkno1EzPhx0001Sr,0] [WEBSERVICE_PORT.name: IDecisionService_pt] [APP: soa-infra] [J2EE_MODULE.name: fabric] [dcid: 11d1def534ea1be0:6ebcb03b:1348eaaf001:-7fd1-000000000000043a] [WEBSERVICE.name: ProcessInitiationRules_InitiationDecisionService_ep] [J2EE_APP.name: soa-infra] Message Type is normalized, exiting agent.processFault()
    [2011-12-30T13:45:43.994+00:00] [AdminServer] [ERROR] [OWS-04115] [oracle.webservices.service] [tid: [ACTIVE].ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JIFE1AxFw000jzwkno1EzPhx0001Sr,0] [APP: soa-infra] [dcid: 11d1def534ea1be0:6ebcb03b:1348eaaf001:-7fd1-000000000000043a] [arg: FabricProvider] [arg: javax.xml.rpc.soap.SOAPFaultException] An error occurred for port: FabricProvider: javax.xml.rpc.soap.SOAPFaultException.

  • I have an imac g4 purchased Dec 2003 runnung OS 10.5.8.  It runs fine with airport off, but when I turn airport on it freezes with the black page,  "restart by holding power key . . ."  I swapped the airport extreme card with the one in my ibook G4 (purch

    i have an imac g4 purchased Dec 2003 runnung OS 10.5.8.  It runs fine with airport off, but when I turn airport on it freezes with the black page,  "restart by holding power key . . ."  I swapped the airport extreme card with the one in my ibook G4 (purchased same date and running same OS).  No change in operation.
    I am running wifi from verizon.  Recently changed from mifi2200 to jetpak 4620 in a 3G location.  Ibook running fine, desktop freezes.  If I can boot desktop in safe mode and get airport turned off in time. then I can reboot regularly and imac runs flawlessly with no wireless.Have run disk utilities and TechTool Pro rebuild etc, but nothing has worked.  How do I fine the culprit?

    the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
    That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
    We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
    I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
    After all, the component or software could only be tested as far as the current OS version when the component or software was released.
    Beyond that, we are all "beta testing".
    Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
    After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
    Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
    I wish they would include the latest pkgs at least with software update.
    Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
    This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
    In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
    Until then, I'll leave Software Update disabled.......

  • I get error message DB745 with EDIT ALV on a field type DEC?

    Hi,
    I have an ALV which has a field type DEC.
    The ALV is open for edit.
    Once I put negative number in, I get the error message DB745.
    This error is retrieved from SAP code and I do not see any reason why.
    I checked the field cat and it looks fine (ref to a field type DEC).
    I am using lcl_grid_event_receiver with method: handle_data_changed FOR
    EVENT data_changed OF cl_gui_alv_grid.
    In that method I get the error in er_data_changed->mt_protocol.
    There is no problem to show negative data if it is saved in the database
    as negative.
    Can anyone throw ideas how to fix that?
    Thanks,
    Itay

    If you simply check the domain WERT7, you'll see that the checkbox for "Sign" is <b>not</b> checked. Therefore negative numbers are <b>not</b> allowed.
    Just because a field is decimal or currency does <b>not</b> mean that negatives are allowed.
    Many times, the sign is handled by a separate debit/credit indicator field such as a field with a domain of SHKZG.
    Rob
    Message was edited by:
            Rob Burbank

  • %AAAA-3-SUBTYPE: Bad Subtype [dec] for "[chars]" ([dec]) error message

    Hi,
    My Catalyst 6513 have the following error message :
    %AAAA-3-SUBTYPE: Bad Subtype [dec] for "[chars]" ([dec])
    The Error Message Decoder metion :
    An internal software error has occurred.
    Recommended Action: Copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative, and provide the representative with the gathered information.
    Related documents- No specific documents apply to this error message.
    Is it the hardware problem or software bug?
    Best Regards,
    Jackson Ku

    Jackson, best is to contact TAC, they should be able to decipher more accurately what it means and wheather is hardware or software.. but this sounds more of a software as %AAAA are TACACS authentication related messages with level 3 error condition based on this link.
    http://www.cisco.com/en/US/docs/ios/12_1/system/message/emdover.html
    http://www.cisco.com/en/US/docs/ios/12_1/system/message/emdaaaa.html#wp1025091

  • Cannot be converted in type DEC,CURR - longtext

    Dear,
    When we are loading the data to the targets, we are getting the errors in the Transfer rules like mentioned bellow
    Info source 0EC_CS_1 (Transaction Data for Consolidation)
    Status (tab) :
    Technical : Collection in source system ended
    Processing Step : Processing End
    Details (tab):
    Processing end : Errors occurred
    Error records written to application log
    Error in an arithmetic operation in record 1
    Record 1 :Contents 00 0.0000000 from field PCNT1 cannot be converted in type DEC ->longtext
    Info source 0CO_OM_CCA_9 (Cost Centers: Actual Costs with Delta E)
    Record 39952:Contents 048624.95- 1 from field SWF cannot be converted in type CURR ->longtext
    Kindly help.
    Thanks & Regards,
    Kiran A
    Edited by: Kiran A on Mar 21, 2010 10:23 AM
    Edited by: Kiran A on Mar 21, 2010 11:36 AM

    Hi,
                   It is sure some where in transferrules the mapping wasdone wrongly , like char --char of info object but in ur case some where data element is not same for field and info object.
      check throughly transfer rules correctly field level and infoobject mapping  and activate.
    it is some where currency and unit fields the difference is there for data elements
    Thanks&Regards,
    Sathish
    Edited by: sathish kakumudi on Mar 21, 2010 4:01 PM

  • Cannot start XFCE

    This is my second arch system in two days; both on the same machine. The first installation is up and running great but for some reason I cannot seem to get XFCE4 running , on the second installation, from a USB device. I will post some logs but I am not really sure what is causing the issue. When I start X the screen just goes blank with mouse input available. GLX gears can also be run through TVM and the nvidia module is loaded for my GT 240.
    Also I don't have a swap partition as it is a USB device. Do i need to configure the system to not use a swap?
    Any help is appreciated. Thanks!
    Xorg.log
    X.Org X Server 1.11.3
    Release Date: 2011-12-16
    [ 1582.744] X Protocol Version 11, Revision 0
    [ 1582.744] Build Operating System: Linux 3.1.5-1-ARCH x86_64
    [ 1582.744] Current Operating System: Linux myhost 3.1.5-1-ARCH #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011 x86_64
    [ 1582.744] Kernel command line: root=/dev/sdb2 ro
    [ 1582.744] Build Date: 17 December 2011 09:17:41AM
    [ 1582.744]
    [ 1582.744] Current version of pixman: 0.24.0
    [ 1582.744] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 1582.745] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 1582.745] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 18 06:10:17 2011
    [ 1582.745] (==) Using config file: "/etc/X11/xorg.conf"
    [ 1582.746] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 1582.746] (==) ServerLayout "Layout0"
    [ 1582.746] (**) |-->Screen "Screen0" (0)
    [ 1582.746] (**) | |-->Monitor "Monitor0"
    [ 1582.746] (**) | |-->Device "Device0"
    [ 1582.746] (**) |-->Input Device "Keyboard0"
    [ 1582.746] (**) |-->Input Device "Mouse0"
    [ 1582.746] (==) Automatically adding devices
    [ 1582.746] (==) Automatically enabling devices
    [ 1582.746] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1582.746] Entry deleted from font path.
    [ 1582.746] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1582.746] Entry deleted from font path.
    [ 1582.746] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1582.746] Entry deleted from font path.
    [ 1582.746] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1582.746] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1582.746] Entry deleted from font path.
    [ 1582.746] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1582.746] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 1582.746] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 1582.746] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 1582.746] (WW) Disabling Keyboard0
    [ 1582.746] (WW) Disabling Mouse0
    [ 1582.746] (II) Loader magic: 0x7ccae0
    [ 1582.746] (II) Module ABI versions:
    [ 1582.746] X.Org ANSI C Emulation: 0.4
    [ 1582.746] X.Org Video Driver: 11.0
    [ 1582.746] X.Org XInput driver : 13.0
    [ 1582.746] X.Org Server Extension : 6.0
    [ 1582.747] (--) PCI:*(0:1:0:0) 10de:0ca3:1043:8326 rev 162, Mem @ 0xf6000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000a800/128, BIOS @ 0x????????/524288
    [ 1582.747] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 1582.747] (II) LoadModule: "extmod"
    [ 1582.747] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 1582.747] (II) Module extmod: vendor="X.Org Foundation"
    [ 1582.747] compiled for 1.11.3, module version = 1.0.0
    [ 1582.747] Module class: X.Org Server Extension
    [ 1582.747] ABI class: X.Org Server Extension, version 6.0
    [ 1582.747] (II) Loading extension MIT-SCREEN-SAVER
    [ 1582.747] (II) Loading extension XFree86-VidModeExtension
    [ 1582.747] (II) Loading extension XFree86-DGA
    [ 1582.747] (II) Loading extension DPMS
    [ 1582.747] (II) Loading extension XVideo
    [ 1582.747] (II) Loading extension XVideo-MotionCompensation
    [ 1582.747] (II) Loading extension X-Resource
    [ 1582.747] (II) LoadModule: "dbe"
    [ 1582.747] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 1582.747] (II) Module dbe: vendor="X.Org Foundation"
    [ 1582.747] compiled for 1.11.3, module version = 1.0.0
    [ 1582.747] Module class: X.Org Server Extension
    [ 1582.747] ABI class: X.Org Server Extension, version 6.0
    [ 1582.747] (II) Loading extension DOUBLE-BUFFER
    [ 1582.747] (II) LoadModule: "glx"
    [ 1582.747] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 1582.757] (II) Module glx: vendor="NVIDIA Corporation"
    [ 1582.757] compiled for 4.0.2, module version = 1.0.0
    [ 1582.757] Module class: X.Org Server Extension
    [ 1582.757] (II) NVIDIA GLX Module 290.10 Wed Nov 16 18:01:24 PST 2011
    [ 1582.757] (II) Loading extension GLX
    [ 1582.757] (II) LoadModule: "record"
    [ 1582.757] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 1582.757] (II) Module record: vendor="X.Org Foundation"
    [ 1582.757] compiled for 1.11.3, module version = 1.13.0
    [ 1582.757] Module class: X.Org Server Extension
    [ 1582.757] ABI class: X.Org Server Extension, version 6.0
    [ 1582.757] (II) Loading extension RECORD
    [ 1582.757] (II) LoadModule: "dri"
    [ 1582.757] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 1582.757] (II) Module dri: vendor="X.Org Foundation"
    [ 1582.757] compiled for 1.11.3, module version = 1.0.0
    [ 1582.757] ABI class: X.Org Server Extension, version 6.0
    [ 1582.757] (II) Loading extension XFree86-DRI
    [ 1582.757] (II) LoadModule: "dri2"
    [ 1582.757] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 1582.757] (II) Module dri2: vendor="X.Org Foundation"
    [ 1582.757] compiled for 1.11.3, module version = 1.2.0
    [ 1582.757] ABI class: X.Org Server Extension, version 6.0
    [ 1582.757] (II) Loading extension DRI2
    [ 1582.757] (II) LoadModule: "nvidia"
    [ 1582.758] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 1582.758] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 1582.758] compiled for 4.0.2, module version = 1.0.0
    [ 1582.758] Module class: X.Org Video Driver
    [ 1582.758] (II) NVIDIA dlloader X Driver 290.10 Wed Nov 16 17:41:10 PST 2011
    [ 1582.758] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 1582.758] (--) using VT number 7
    [ 1582.761] (II) Loading sub module "fb"
    [ 1582.761] (II) LoadModule: "fb"
    [ 1582.761] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1582.761] (II) Module fb: vendor="X.Org Foundation"
    [ 1582.761] compiled for 1.11.3, module version = 1.0.0
    [ 1582.761] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1582.761] (II) Loading sub module "wfb"
    [ 1582.761] (II) LoadModule: "wfb"
    [ 1582.761] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 1582.762] (II) Module wfb: vendor="X.Org Foundation"
    [ 1582.762] compiled for 1.11.3, module version = 1.0.0
    [ 1582.762] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1582.762] (II) Loading sub module "ramdac"
    [ 1582.762] (II) LoadModule: "ramdac"
    [ 1582.762] (II) Module "ramdac" already built-in
    [ 1582.762] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 1582.762] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 1582.762] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1582.762] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 1582.762] (==) NVIDIA(0): RGB weight 888
    [ 1582.762] (==) NVIDIA(0): Default visual is TrueColor
    [ 1582.762] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 1582.762] (**) NVIDIA(0): Enabling 2D acceleration
    [ 1583.448] (II) NVIDIA(GPU-0): Display (ViewSonic VX2260WM (DFP-0)) does not support NVIDIA
    [ 1583.448] (II) NVIDIA(GPU-0): 3D Vision stereo.
    [ 1583.449] (II) NVIDIA(0): NVIDIA GPU GeForce GT 240 (GT215) at PCI:1:0:0 (GPU-0)
    [ 1583.449] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 1583.449] (--) NVIDIA(0): VideoBIOS: 70.15.23.00.05
    [ 1583.449] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 1583.449] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 1583.449] (--) NVIDIA(0): Connected display device(s) on GeForce GT 240 at PCI:1:0:0
    [ 1583.449] (--) NVIDIA(0): ViewSonic VX2260WM (DFP-0)
    [ 1583.449] (--) NVIDIA(0): ViewSonic VX2260WM (DFP-0): 330.0 MHz maximum pixel clock
    [ 1583.449] (--) NVIDIA(0): ViewSonic VX2260WM (DFP-0): Internal Dual Link TMDS
    [ 1583.471] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
    [ 1583.471] (**) NVIDIA(0): enabled on all display devices.
    [ 1583.510] (II) NVIDIA(0): Assigned Display Device: DFP-0
    [ 1583.510] (==) NVIDIA(0):
    [ 1583.510] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 1583.510] (==) NVIDIA(0): will be used as the requested mode.
    [ 1583.510] (==) NVIDIA(0):
    [ 1583.510] (II) NVIDIA(0): Validated modes:
    [ 1583.510] (II) NVIDIA(0): "nvidia-auto-select"
    [ 1583.510] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    [ 1583.538] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
    [ 1583.538] (--) NVIDIA(0): option
    [ 1583.538] (--) Depth 24 pixmap format is 32 bpp
    [ 1583.539] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 1583.543] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 1583.543] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 1583.543] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 1583.543] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 1583.543] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 1583.543] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 1583.543] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 1583.543] (II) NVIDIA(0): Config Options in the README.
    [ 1583.547] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 1583.581] (II) Loading extension NV-GLX
    [ 1583.596] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 1583.596] (==) NVIDIA(0): Backing store disabled
    [ 1583.596] (==) NVIDIA(0): Silken mouse enabled
    [ 1583.597] (**) NVIDIA(0): DPMS enabled
    [ 1583.597] (II) Loading extension NV-CONTROL
    [ 1583.597] (WW) NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "CRT", but no
    [ 1583.597] (WW) NVIDIA(0): such display device could be found, or all display devices
    [ 1583.597] (WW) NVIDIA(0): by that name are currently unavailable.
    [ 1583.597] (WW) NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "TV", but no such
    [ 1583.597] (WW) NVIDIA(0): display device could be found, or all display devices by
    [ 1583.597] (WW) NVIDIA(0): that name are currently unavailable.
    [ 1583.597] (II) Loading extension XINERAMA
    [ 1583.597] (II) Loading sub module "dri2"
    [ 1583.597] (II) LoadModule: "dri2"
    [ 1583.597] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 1583.597] (II) Module dri2: vendor="X.Org Foundation"
    [ 1583.597] compiled for 1.11.3, module version = 1.2.0
    [ 1583.597] ABI class: X.Org Server Extension, version 6.0
    [ 1583.598] (II) NVIDIA(0): [DRI2] Setup complete
    [ 1583.598] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 1583.598] (==) RandR enabled
    [ 1583.598] (II) Initializing built-in extension Generic Event Extension
    [ 1583.598] (II) Initializing built-in extension SHAPE
    [ 1583.598] (II) Initializing built-in extension MIT-SHM
    [ 1583.598] (II) Initializing built-in extension XInputExtension
    [ 1583.598] (II) Initializing built-in extension XTEST
    [ 1583.598] (II) Initializing built-in extension BIG-REQUESTS
    [ 1583.598] (II) Initializing built-in extension SYNC
    [ 1583.598] (II) Initializing built-in extension XKEYBOARD
    [ 1583.598] (II) Initializing built-in extension XC-MISC
    [ 1583.598] (II) Initializing built-in extension SECURITY
    [ 1583.598] (II) Initializing built-in extension XINERAMA
    [ 1583.598] (II) Initializing built-in extension XFIXES
    [ 1583.598] (II) Initializing built-in extension RENDER
    [ 1583.598] (II) Initializing built-in extension RANDR
    [ 1583.598] (II) Initializing built-in extension COMPOSITE
    [ 1583.598] (II) Initializing built-in extension DAMAGE
    [ 1583.599] (II) Initializing extension GLX
    [ 1583.637] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 1583.637] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1583.637] (II) LoadModule: "evdev"
    [ 1583.637] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1583.637] (II) Module evdev: vendor="X.Org Foundation"
    [ 1583.637] compiled for 1.10.99.902, module version = 2.6.0
    [ 1583.637] Module class: X.Org XInput Driver
    [ 1583.637] ABI class: X.Org XInput driver, version 13.0
    [ 1583.637] (II) Using input driver 'evdev' for 'Power Button'
    [ 1583.637] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1583.637] (**) Power Button: always reports core events
    [ 1583.637] (**) Power Button: Device: "/dev/input/event4"
    [ 1583.638] (--) Power Button: Found keys
    [ 1583.638] (II) Power Button: Configuring as keyboard
    [ 1583.638] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 1583.638] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 1583.638] (**) Option "xkb_rules" "evdev"
    [ 1583.638] (**) Option "xkb_model" "evdev"
    [ 1583.638] (**) Option "xkb_layout" "gb"
    [ 1583.656] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 1583.656] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1583.656] (II) Using input driver 'evdev' for 'Power Button'
    [ 1583.656] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1583.656] (**) Power Button: always reports core events
    [ 1583.656] (**) Power Button: Device: "/dev/input/event3"
    [ 1583.656] (--) Power Button: Found keys
    [ 1583.656] (II) Power Button: Configuring as keyboard
    [ 1583.656] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
    [ 1583.656] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 1583.656] (**) Option "xkb_rules" "evdev"
    [ 1583.656] (**) Option "xkb_model" "evdev"
    [ 1583.656] (**) Option "xkb_layout" "gb"
    [ 1583.657] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event6)
    [ 1583.657] (II) No input driver/identifier specified (ignoring)
    [ 1583.657] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event7)
    [ 1583.657] (II) No input driver/identifier specified (ignoring)
    [ 1583.657] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event8)
    [ 1583.657] (II) No input driver/identifier specified (ignoring)
    [ 1583.657] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event9)
    [ 1583.657] (II) No input driver/identifier specified (ignoring)
    [ 1583.657] (II) config/udev: Adding input device HID 04b4:0033 (/dev/input/event0)
    [ 1583.657] (**) HID 04b4:0033: Applying InputClass "evdev pointer catchall"
    [ 1583.657] (II) Using input driver 'evdev' for 'HID 04b4:0033'
    [ 1583.657] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1583.657] (**) HID 04b4:0033: always reports core events
    [ 1583.657] (**) HID 04b4:0033: Device: "/dev/input/event0"
    [ 1583.657] (--) HID 04b4:0033: Found 9 mouse buttons
    [ 1583.657] (--) HID 04b4:0033: Found scroll wheel(s)
    [ 1583.657] (--) HID 04b4:0033: Found relative axes
    [ 1583.657] (--) HID 04b4:0033: Found x and y relative axes
    [ 1583.657] (II) HID 04b4:0033: Configuring as mouse
    [ 1583.657] (II) HID 04b4:0033: Adding scrollwheel support
    [ 1583.657] (**) HID 04b4:0033: YAxisMapping: buttons 4 and 5
    [ 1583.657] (**) HID 04b4:0033: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 1583.657] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb5/5-5/5-5:1.0/input/input0/event0"
    [ 1583.657] (II) XINPUT: Adding extended input device "HID 04b4:0033" (type: MOUSE, id 8)
    [ 1583.658] (II) HID 04b4:0033: initialized for relative axes.
    [ 1583.658] (**) HID 04b4:0033: (accel) keeping acceleration scheme 1
    [ 1583.658] (**) HID 04b4:0033: (accel) acceleration profile 0
    [ 1583.658] (**) HID 04b4:0033: (accel) acceleration factor: 2.000
    [ 1583.658] (**) HID 04b4:0033: (accel) acceleration threshold: 4
    [ 1583.658] (II) config/udev: Adding input device HID 04b4:0033 (/dev/input/mouse0)
    [ 1583.658] (II) No input driver/identifier specified (ignoring)
    [ 1583.658] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1)
    [ 1583.658] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1583.658] (II) Using input driver 'evdev' for 'USB Keyboard'
    [ 1583.658] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1583.658] (**) USB Keyboard: always reports core events
    [ 1583.658] (**) USB Keyboard: Device: "/dev/input/event1"
    [ 1583.658] (--) USB Keyboard: Found keys
    [ 1583.658] (II) USB Keyboard: Configuring as keyboard
    [ 1583.658] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb6/6-1/6-1:1.0/input/input1/event1"
    [ 1583.658] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 9)
    [ 1583.658] (**) Option "xkb_rules" "evdev"
    [ 1583.658] (**) Option "xkb_model" "evdev"
    [ 1583.658] (**) Option "xkb_layout" "gb"
    [ 1583.658] (II) config/udev: Adding input device USB Keyboard (/dev/input/event2)
    [ 1583.658] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1583.658] (II) Using input driver 'evdev' for 'USB Keyboard'
    [ 1583.658] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1583.659] (**) USB Keyboard: always reports core events
    [ 1583.659] (**) USB Keyboard: Device: "/dev/input/event2"
    [ 1583.659] (--) USB Keyboard: Found 1 mouse buttons
    [ 1583.659] (--) USB Keyboard: Found scroll wheel(s)
    [ 1583.659] (--) USB Keyboard: Found relative axes
    [ 1583.659] (--) USB Keyboard: Found absolute axes
    [ 1583.659] (--) USB Keyboard: Found keys
    [ 1583.659] (II) USB Keyboard: Configuring as mouse
    [ 1583.659] (II) USB Keyboard: Configuring as keyboard
    [ 1583.659] (II) USB Keyboard: Adding scrollwheel support
    [ 1583.659] (**) USB Keyboard: YAxisMapping: buttons 4 and 5
    [ 1583.659] (**) USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 1583.659] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb6/6-1/6-1:1.1/input/input2/event2"
    [ 1583.659] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 10)
    [ 1583.659] (**) Option "xkb_rules" "evdev"
    [ 1583.659] (**) Option "xkb_model" "evdev"
    [ 1583.659] (**) Option "xkb_layout" "gb"
    [ 1583.659] (EE) USB Keyboard: failed to initialize for relative axes.
    [ 1583.659] (II) USB Keyboard: initialized for absolute axes.
    [ 1583.659] (**) USB Keyboard: (accel) keeping acceleration scheme 1
    [ 1583.659] (**) USB Keyboard: (accel) acceleration profile 0
    [ 1583.659] (**) USB Keyboard: (accel) acceleration factor: 2.000
    [ 1583.659] (**) USB Keyboard: (accel) acceleration threshold: 4
    [ 1583.659] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 1583.659] (II) No input driver/identifier specified (ignoring)
    [ 1599.009] (II) USB Keyboard: Close
    [ 1599.009] (II) UnloadModule: "evdev"
    [ 1599.009] (II) Unloading evdev
    [ 1599.009] (II) USB Keyboard: Close
    [ 1599.009] (II) UnloadModule: "evdev"
    [ 1599.009] (II) Unloading evdev
    [ 1599.009] (II) HID 04b4:0033: Close
    [ 1599.009] (II) UnloadModule: "evdev"
    [ 1599.009] (II) Unloading evdev
    [ 1599.009] (II) Power Button: Close
    [ 1599.009] (II) UnloadModule: "evdev"
    [ 1599.009] (II) Unloading evdev
    [ 1599.009] (II) Power Button: Close
    [ 1599.009] (II) UnloadModule: "evdev"
    [ 1599.009] (II) Unloading evdev
    [ 1599.028] Server terminated successfully (0). Closing log file.
    dmesg
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Linux version 3.1.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20111125 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Command line: root=/dev/sdb2 ro
    Dec 18 05:44:01 localhost kernel: [ 0.000000] BIOS-provided physical RAM map:
    Dec 18 05:44:01 localhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7f90000 (usable)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] BIOS-e820: 00000000c7f90000 - 00000000c7f9e000 (ACPI data)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] BIOS-e820: 00000000c7f9e000 - 00000000c7fe0000 (ACPI NVS)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] BIOS-e820: 00000000c7fe0000 - 00000000c8000000 (reserved)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] NX (Execute Disable) protection: active
    Dec 18 05:44:01 localhost kernel: [ 0.000000] DMI present.
    Dec 18 05:44:01 localhost kernel: [ 0.000000] No AGP bridge found
    Dec 18 05:44:01 localhost kernel: [ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x400000000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Dec 18 05:44:01 localhost kernel: [ 0.000000] last_pfn = 0xc7f90 max_arch_pfn = 0x400000000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Using GB pages for direct mapping
    Dec 18 05:44:01 localhost kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000c7f90000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] RAMDISK: 37d6a000 - 37ff0000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: RSDP 00000000000f8c10 00014 (v00 ACPIAM)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: RSDT 00000000c7f90000 0003C (v01 7599MS A7599300 20110807 MSFT 00000097)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: FACP 00000000c7f90200 00084 (v01 7599MS A7599300 20110807 MSFT 00000097)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: DSDT 00000000c7f90660 05A15 (v01 A7599 A7599300 00000300 INTL 20051117)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: FACS 00000000c7f9e000 00040
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: APIC 00000000c7f90390 0010C (v01 7599MS A7599300 20110807 MSFT 00000097)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: MCFG 00000000c7f904a0 0003C (v01 7599MS OEMMCFG 20110807 MSFT 00000097)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: OEMB 00000000c7f9e040 00072 (v01 7599MS A7599300 20110807 MSFT 00000097)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: HPET 00000000c7f9a660 00038 (v01 7599MS OEMHPET 20110807 MSFT 00000097)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: SSDT 00000000c7f9a6a0 00948 (v01 A M I POWERNOW 00000001 AMD 00000001)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
    Dec 18 05:44:01 localhost kernel: [ 0.000000] No NUMA configuration found
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Faking a node at 0000000000000000-0000000238000000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000238000000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] NODE_DATA [0000000237ffb000 - 0000000237ffffff]
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Zone PFN ranges:
    Dec 18 05:44:01 localhost kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Normal 0x00100000 -> 0x00238000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Movable zone start PFN for each node
    Dec 18 05:44:01 localhost kernel: [ 0.000000] early_node_map[3] active PFN ranges
    Dec 18 05:44:01 localhost kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
    Dec 18 05:44:01 localhost kernel: [ 0.000000] 0: 0x00000100 -> 0x000c7f90
    Dec 18 05:44:01 localhost kernel: [ 0.000000] 0: 0x00100000 -> 0x00238000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    Dec 18 05:44:01 localhost kernel: [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
    Dec 18 05:44:01 localhost kernel: [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] SMP: Allowing 24 CPUs, 20 hotplug CPUs
    Dec 18 05:44:01 localhost kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000c7f90000 - 00000000c7f9e000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000c7f9e000 - 00000000c7fe0000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000c7fe0000 - 00000000c8000000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000fff00000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:37f00000)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
    Dec 18 05:44:01 localhost kernel: [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:24 nr_node_ids:1
    Dec 18 05:44:01 localhost kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022f200000 s80448 r8192 d21952 u131072
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060570
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Policy zone: Normal
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Kernel command line: root=/dev/sdb2 ro
    Dec 18 05:44:01 localhost kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Checking aperture...
    Dec 18 05:44:01 localhost kernel: [ 0.000000] No AGP bridge found
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Node 0: aperture @ bc000000 size 32 MB
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Please enable the IOMMU option in the BIOS setup
    Dec 18 05:44:01 localhost kernel: [ 0.000000] This costs you 64 MB of RAM
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Mapping aperture over 65536 KB of RAM @ bc000000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Memory: 8108088k/9306112k available (4157k kernel code, 918404k absent, 279620k reserved, 5287k data, 712k init)
    Dec 18 05:44:01 localhost kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Preemptible hierarchical RCU implementation.
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Verbose stalled-CPUs detection is disabled.
    Dec 18 05:44:01 localhost kernel: [ 0.000000] NR_IRQS:2304
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Console: colour VGA+ 80x25
    Dec 18 05:44:01 localhost kernel: [ 0.000000] console [tty0] enabled
    Dec 18 05:44:01 localhost kernel: [ 0.000000] allocated 67108864 bytes of page_cgroup
    Dec 18 05:44:01 localhost kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Fast TSC calibration using PIT
    Dec 18 05:44:01 localhost kernel: [ 0.000000] Detected 2999.740 MHz processor.
    Dec 18 05:44:01 localhost kernel: [ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 6001.45 BogoMIPS (lpj=9999133)
    Dec 18 05:44:01 localhost kernel: [ 0.003342] pid_max: default: 32768 minimum: 301
    Dec 18 05:44:01 localhost kernel: [ 0.003454] Security Framework initialized
    Dec 18 05:44:01 localhost kernel: [ 0.003457] AppArmor: AppArmor disabled by boot time parameter
    Dec 18 05:44:01 localhost kernel: [ 0.006982] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Dec 18 05:44:01 localhost kernel: [ 0.009055] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Dec 18 05:44:01 localhost kernel: [ 0.009978] Mount-cache hash table entries: 256
    Dec 18 05:44:01 localhost kernel: [ 0.010331] Initializing cgroup subsys cpuacct
    Dec 18 05:44:01 localhost kernel: [ 0.010357] Initializing cgroup subsys memory
    Dec 18 05:44:01 localhost kernel: [ 0.010373] Initializing cgroup subsys devices
    Dec 18 05:44:01 localhost kernel: [ 0.010374] Initializing cgroup subsys freezer
    Dec 18 05:44:01 localhost kernel: [ 0.010375] Initializing cgroup subsys net_cls
    Dec 18 05:44:01 localhost kernel: [ 0.010377] Initializing cgroup subsys blkio
    Dec 18 05:44:01 localhost kernel: [ 0.010428] CPU: Physical Processor ID: 0
    Dec 18 05:44:01 localhost kernel: [ 0.010429] CPU: Processor Core ID: 0
    Dec 18 05:44:01 localhost kernel: [ 0.010431] mce: CPU supports 6 MCE banks
    Dec 18 05:44:01 localhost kernel: [ 0.010438] using AMD E400 aware idle routine
    Dec 18 05:44:01 localhost kernel: [ 0.010948] ACPI: Core revision 20110623
    Dec 18 05:44:01 localhost kernel: [ 0.013346] ftrace: allocating 16316 entries in 64 pages
    Dec 18 05:44:01 localhost kernel: [ 0.016726] Switched APIC routing to physical flat.
    Dec 18 05:44:01 localhost kernel: [ 0.017001] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Dec 18 05:44:01 localhost kernel: [ 0.051529] CPU0: AMD Phenom(tm) II X4 960T Processor stepping 00
    Dec 18 05:44:01 localhost kernel: [ 0.053330] Performance Events: AMD PMU driver.
    Dec 18 05:44:01 localhost kernel: [ 0.053330] ... version: 0
    Dec 18 05:44:01 localhost kernel: [ 0.053330] ... bit width: 48
    Dec 18 05:44:01 localhost kernel: [ 0.053330] ... generic registers: 4
    Dec 18 05:44:01 localhost kernel: [ 0.053330] ... value mask: 0000ffffffffffff
    Dec 18 05:44:01 localhost kernel: [ 0.053330] ... max period: 00007fffffffffff
    Dec 18 05:44:01 localhost kernel: [ 0.053330] ... fixed-purpose events: 0
    Dec 18 05:44:01 localhost kernel: [ 0.053330] ... event mask: 000000000000000f
    Dec 18 05:44:01 localhost kernel: [ 0.053330] System has AMD C1E enabled
    Dec 18 05:44:01 localhost kernel: [ 0.053330] Switch to broadcast mode on CPU0
    Dec 18 05:44:01 localhost kernel: [ 0.070355] NMI watchdog enabled, takes one hw-pmu counter.
    Dec 18 05:44:01 localhost kernel: [ 0.096721] Booting Node 0, Processors #1
    Dec 18 05:44:01 localhost kernel: [ 0.193344] NMI watchdog enabled, takes one hw-pmu counter.
    Dec 18 05:44:01 localhost kernel: [ 0.193341] Switch to broadcast mode on CPU1
    Dec 18 05:44:01 localhost kernel: [ 0.213423] #2
    Dec 18 05:44:01 localhost kernel: [ 0.310018] NMI watchdog enabled, takes one hw-pmu counter.
    Dec 18 05:44:01 localhost kernel: [ 0.310005] Switch to broadcast mode on CPU2
    Dec 18 05:44:01 localhost kernel: [ 0.330068] #3
    Dec 18 05:44:01 localhost kernel: [ 0.426684] NMI watchdog enabled, takes one hw-pmu counter.
    Dec 18 05:44:01 localhost kernel: [ 0.426669] Switch to broadcast mode on CPU3
    Dec 18 05:44:01 localhost kernel: [ 0.433351] Brought up 4 CPUs
    Dec 18 05:44:01 localhost kernel: [ 0.433360] Total of 4 processors activated (24008.17 BogoMIPS).
    Dec 18 05:44:01 localhost kernel: [ 0.436772] devtmpfs: initialized
    Dec 18 05:44:01 localhost kernel: [ 0.437828] PM: Registering ACPI NVS region at c7f9e000 (270336 bytes)
    Dec 18 05:44:01 localhost kernel: [ 0.437828] print_constraints: dummy:
    Dec 18 05:44:01 localhost kernel: [ 0.437828] NET: Registered protocol family 16
    Dec 18 05:44:01 localhost kernel: [ 0.437828] TOM: 00000000c8000000 aka 3200M
    Dec 18 05:44:01 localhost kernel: [ 0.437828] TOM2: 0000000238000000 aka 9088M
    Dec 18 05:44:01 localhost kernel: [ 0.437828] Extended Config Space enabled on 1 nodes
    Dec 18 05:44:01 localhost kernel: [ 0.437828] ACPI: bus type pci registered
    Dec 18 05:44:01 localhost kernel: [ 0.437828] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Dec 18 05:44:01 localhost kernel: [ 0.437828] PCI: not using MMCONFIG
    Dec 18 05:44:01 localhost kernel: [ 0.437828] PCI: Using configuration type 1 for base access
    Dec 18 05:44:01 localhost kernel: [ 0.437828] PCI: Using configuration type 1 for extended access
    Dec 18 05:44:01 localhost kernel: [ 0.437958] bio: create slab <bio-0> at 0
    Dec 18 05:44:01 localhost kernel: [ 0.437958] ACPI: Added _OSI(Module Device)
    Dec 18 05:44:01 localhost kernel: [ 0.437958] ACPI: Added _OSI(Processor Device)
    Dec 18 05:44:01 localhost kernel: [ 0.437958] ACPI: Added _OSI(3.0 _SCP Extensions)
    Dec 18 05:44:01 localhost kernel: [ 0.437958] ACPI: Added _OSI(Processor Aggregator Device)
    Dec 18 05:44:01 localhost kernel: [ 0.440996] ACPI: Executed 3 blocks of module-level executable AML code
    Dec 18 05:44:01 localhost kernel: [ 0.453634] ACPI: Interpreter enabled
    Dec 18 05:44:01 localhost kernel: [ 0.453637] ACPI: (supports S0 S1 S4 S5)
    Dec 18 05:44:01 localhost kernel: [ 0.453651] ACPI: Using IOAPIC for interrupt routing
    Dec 18 05:44:01 localhost kernel: [ 0.453671] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Dec 18 05:44:01 localhost kernel: [ 0.454106] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    Dec 18 05:44:01 localhost kernel: [ 0.521645] ACPI: No dock devices found.
    Dec 18 05:44:01 localhost kernel: [ 0.521647] HEST: Table not found.
    Dec 18 05:44:01 localhost kernel: [ 0.521649] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Dec 18 05:44:01 localhost kernel: [ 0.521702] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Dec 18 05:44:01 localhost kernel: [ 0.521807] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    Dec 18 05:44:01 localhost kernel: [ 0.521809] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    Dec 18 05:44:01 localhost kernel: [ 0.521810] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    Dec 18 05:44:01 localhost kernel: [ 0.521812] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
    Dec 18 05:44:01 localhost kernel: [ 0.521813] pci_root PNP0A03:00: host bridge window [mem 0xc8000000-0xdfffffff]
    Dec 18 05:44:01 localhost kernel: [ 0.521815] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
    Dec 18 05:44:01 localhost kernel: [ 0.522018] pci 0000:00:11.0: set SATA to AHCI mode
    Dec 18 05:44:01 localhost kernel: [ 0.526685] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    Dec 18 05:44:01 localhost kernel: [ 0.533348] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    Dec 18 05:44:01 localhost kernel: [ 0.533613] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
    Dec 18 05:44:01 localhost kernel: [ 0.533849] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    Dec 18 05:44:01 localhost kernel: [ 0.533859] pci 0000:00:15.0: PCI bridge to [bus 04-04]
    Dec 18 05:44:01 localhost kernel: [ 0.540019] pci 0000:00:15.1: PCI bridge to [bus 05-05]
    Dec 18 05:44:01 localhost kernel: [ 0.540419] pci0000:00: Requesting ACPI _OSC control (0x1d)
    Dec 18 05:44:01 localhost kernel: [ 0.540421] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    Dec 18 05:44:01 localhost kernel: [ 0.540423] ACPI _OSC control for PCIe not granted, disabling ASPM
    Dec 18 05:44:01 localhost kernel: [ 0.543436] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
    Dec 18 05:44:01 localhost kernel: [ 0.543482] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 14 15)
    Dec 18 05:44:01 localhost kernel: [ 0.543526] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
    Dec 18 05:44:01 localhost kernel: [ 0.543569] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 14 15)
    Dec 18 05:44:01 localhost kernel: [ 0.543601] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
    Dec 18 05:44:01 localhost kernel: [ 0.543626] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
    Dec 18 05:44:01 localhost kernel: [ 0.543651] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 7 10 11 14 15)
    Dec 18 05:44:01 localhost kernel: [ 0.543675] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
    Dec 18 05:44:01 localhost kernel: [ 0.543717] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    Dec 18 05:44:01 localhost kernel: [ 0.543717] vgaarb: loaded
    Dec 18 05:44:01 localhost kernel: [ 0.543717] vgaarb: bridge control possible 0000:01:00.0
    Dec 18 05:44:01 localhost kernel: [ 0.543717] PCI: Using ACPI for IRQ routing
    Dec 18 05:44:01 localhost kernel: [ 0.551166] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
    Dec 18 05:44:01 localhost kernel: [ 0.551309] NetLabel: Initializing
    Dec 18 05:44:01 localhost kernel: [ 0.551310] NetLabel: domain hash size = 128
    Dec 18 05:44:01 localhost kernel: [ 0.551311] NetLabel: protocols = UNLABELED CIPSOv4
    Dec 18 05:44:01 localhost kernel: [ 0.551319] NetLabel: unlabeled traffic allowed by default
    Dec 18 05:44:01 localhost kernel: [ 0.551329] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Dec 18 05:44:01 localhost kernel: [ 0.551331] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    Dec 18 05:44:01 localhost kernel: [ 0.553333] Switching to clocksource hpet
    Dec 18 05:44:01 localhost kernel: [ 0.556566] Switched to NOHz mode on CPU #0
    Dec 18 05:44:01 localhost kernel: [ 0.556578] Switched to NOHz mode on CPU #1
    Dec 18 05:44:01 localhost kernel: [ 0.556589] Switched to NOHz mode on CPU #2
    Dec 18 05:44:01 localhost kernel: [ 0.556598] Switched to NOHz mode on CPU #3
    Dec 18 05:44:01 localhost kernel: [ 0.557105] pnp: PnP ACPI init
    Dec 18 05:44:01 localhost kernel: [ 0.557117] ACPI: bus type pnp registered
    Dec 18 05:44:01 localhost kernel: [ 0.747251] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747253] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747446] system 00:07: [io 0x04d0-0x04d1] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747447] system 00:07: [io 0x040b] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747449] system 00:07: [io 0x04d6] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747450] system 00:07: [io 0x0c00-0x0c01] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747451] system 00:07: [io 0x0c14] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747453] system 00:07: [io 0x0c50-0x0c51] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747454] system 00:07: [io 0x0c52] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747456] system 00:07: [io 0x0c6c] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747457] system 00:07: [io 0x0c6f] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747459] system 00:07: [io 0x0cd0-0x0cd1] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747460] system 00:07: [io 0x0cd2-0x0cd3] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747462] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747463] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747465] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747466] system 00:07: [io 0x0800-0x089f] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747468] system 00:07: [io 0x0b00-0x0b1f] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747469] system 00:07: [io 0x0b20-0x0b3f] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747471] system 00:07: [io 0x0900-0x090f] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747472] system 00:07: [io 0x0910-0x091f] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747474] system 00:07: [io 0xfe00-0xfefe] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747476] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747477] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747479] system 00:07: [mem 0xfed80000-0xfed80fff] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747579] system 00:08: [io 0x0600-0x06df] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747580] system 00:08: [io 0x0ae0-0x0aef] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747636] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747709] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    Dec 18 05:44:01 localhost kernel: [ 0.747711] pnp 00:0a: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    Dec 18 05:44:01 localhost kernel: [ 0.747714] pnp 00:0a: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    Dec 18 05:44:01 localhost kernel: [ 0.747716] pnp 00:0a: disabling [mem 0x00100000-0xc7ffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    Dec 18 05:44:01 localhost kernel: [ 0.747748] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved
    Dec 18 05:44:01 localhost kernel: [ 0.747805] pnp: PnP ACPI: found 11 devices
    Dec 18 05:44:01 localhost kernel: [ 0.747806] ACPI: ACPI bus type pnp unregistered
    Dec 18 05:44:01 localhost kernel: [ 0.754608] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    Dec 18 05:44:01 localhost kernel: [ 0.754609] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
    Dec 18 05:44:01 localhost kernel: [ 0.754612] pci 0000:00:02.0: bridge window [mem 0xf6000000-0xf7efffff]
    Dec 18 05:44:01 localhost kernel: [ 0.754614] pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
    Dec 18 05:44:01 localhost kernel: [ 0.754617] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    Dec 18 05:44:01 localhost kernel: [ 0.754619] pci 0000:00:0a.0: bridge window [mem 0xf7f00000-0xf7ffffff]
    Dec 18 05:44:01 localhost kernel: [ 0.754622] pci 0000:00:14.4: PCI bridge to [bus 03-03]
    Dec 18 05:44:01 localhost kernel: [ 0.754624] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
    Dec 18 05:44:01 localhost kernel: [ 0.754628] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfe7fffff]
    Dec 18 05:44:01 localhost kernel: [ 0.754635] pci 0000:00:15.0: PCI bridge to [bus 04-04]
    Dec 18 05:44:01 localhost kernel: [ 0.754637] pci 0000:00:15.0: bridge window [io 0xc000-0xdfff]
    Dec 18 05:44:01 localhost kernel: [ 0.754645] pci 0000:00:15.1: PCI bridge to [bus 05-05]
    Dec 18 05:44:01 localhost kernel: [ 0.754647] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
    Dec 18 05:44:01 localhost kernel: [ 0.754651] pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff]
    Dec 18 05:44:01 localhost kernel: [ 0.754654] pci 0000:00:15.1: bridge window [mem 0xf4f00000-0xf4ffffff 64bit pref]
    Dec 18 05:44:01 localhost kernel: [ 0.754665] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Dec 18 05:44:01 localhost kernel: [ 0.754670] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Dec 18 05:44:01 localhost kernel: [ 0.754681] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Dec 18 05:44:01 localhost kernel: [ 0.754688] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Dec 18 05:44:01 localhost kernel: [ 0.754780] NET: Registered protocol family 2
    Dec 18 05:44:01 localhost kernel: [ 0.754982] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Dec 18 05:44:01 localhost kernel: [ 0.755987] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    Dec 18 05:44:01 localhost kernel: [ 0.757946] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Dec 18 05:44:01 localhost kernel: [ 0.758182] TCP: Hash tables configured (established 524288 bind 65536)
    Dec 18 05:44:01 localhost kernel: [ 0.758184] TCP reno registered
    Dec 18 05:44:01 localhost kernel: [ 0.758195] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    Dec 18 05:44:01 localhost kernel: [ 0.758237] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    Dec 18 05:44:01 localhost kernel: [ 0.758436] NET: Registered protocol family 1
    Dec 18 05:44:01 localhost kernel: [ 1.599996] Unpacking initramfs...
    Dec 18 05:44:01 localhost kernel: [ 1.623137] Freeing initrd memory: 2584k freed
    Dec 18 05:44:01 localhost kernel: [ 1.624947] PCI-DMA: Disabling AGP.
    Dec 18 05:44:01 localhost kernel: [ 1.625049] PCI-DMA: aperture base @ bc000000 size 65536 KB
    Dec 18 05:44:01 localhost kernel: [ 1.625050] PCI-DMA: using GART IOMMU.
    Dec 18 05:44:01 localhost kernel: [ 1.625053] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    Dec 18 05:44:01 localhost kernel: [ 1.630907] audit: initializing netlink socket (disabled)
    Dec 18 05:44:01 localhost kernel: [ 1.630926] type=2000 audit(1324187035.629:1): initialized
    Dec 18 05:44:01 localhost kernel: [ 1.648537] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Dec 18 05:44:01 localhost kernel: [ 1.684209] VFS: Disk quotas dquot_6.5.2
    Dec 18 05:44:01 localhost kernel: [ 1.684329] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Dec 18 05:44:01 localhost kernel: [ 1.684477] msgmni has been set to 15969
    Dec 18 05:44:01 localhost kernel: [ 1.684754] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    Dec 18 05:44:01 localhost kernel: [ 1.684798] io scheduler noop registered
    Dec 18 05:44:01 localhost kernel: [ 1.684799] io scheduler deadline registered
    Dec 18 05:44:01 localhost kernel: [ 1.684832] io scheduler cfq registered (default)
    Dec 18 05:44:01 localhost kernel: [ 1.685374] ERST: Table is not found!
    Dec 18 05:44:01 localhost kernel: [ 1.685377] GHES: HEST is not enabled!
    Dec 18 05:44:01 localhost kernel: [ 1.685493] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Dec 18 05:44:01 localhost kernel: [ 1.883707] Linux agpgart interface v0.103
    Dec 18 05:44:01 localhost kernel: [ 1.883750] i8042: PNP: No PS/2 controller found. Probing ports directly.
    Dec 18 05:44:01 localhost kernel: [ 1.884084] serio: i8042 KBD port at 0x60,0x64 irq 1
    Dec 18 05:44:01 localhost kernel: [ 1.884115] serio: i8042 AUX port at 0x60,0x64 irq 12
    Dec 18 05:44:01 localhost kernel: [ 1.884282] mousedev: PS/2 mouse device common for all mice
    Dec 18 05:44:01 localhost kernel: [ 1.884327] rtc_cmos 00:02: RTC can wake from S4
    Dec 18 05:44:01 localhost kernel: [ 1.884421] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    Dec 18 05:44:01 localhost kernel: [ 1.884441] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    Dec 18 05:44:01 localhost kernel: [ 1.884449] cpuidle: using governor ladder
    Dec 18 05:44:01 localhost kernel: [ 1.884450] cpuidle: using governor menu
    Dec 18 05:44:01 localhost kernel: [ 1.884622] TCP cubic registered
    Dec 18 05:44:01 localhost kernel: [ 1.884624] NET: Registered protocol family 17
    Dec 18 05:44:01 localhost kernel: [ 1.884629] Registering the dns_resolver key type
    Dec 18 05:44:01 localhost kernel: [ 1.884746] registered taskstats version 1
    Dec 18 05:44:01 localhost kernel: [ 1.902312] rtc_cmos 00:02: setting system clock to 2011-12-18 05:43:56 UTC (1324187036)
    Dec 18 05:44:01 localhost kernel: [ 1.902342] Initializing network drop monitor service
    Dec 18 05:44:01 localhost kernel: [ 1.903285] Freeing unused kernel memory: 712k freed
    Dec 18 05:44:01 localhost kernel: [ 1.903439] Write protecting the kernel read-only data: 8192k
    Dec 18 05:44:01 localhost kernel: [ 1.908087] Freeing unused kernel memory: 1968k freed
    Dec 18 05:44:01 localhost kernel: [ 1.910178] Freeing unused kernel memory: 704k freed
    Dec 18 05:44:01 localhost [ 1.918860] udevd[89]: starting version 173
    Dec 18 05:44:01 localhost kernel: [ 1.939247] SCSI subsystem initialized
    Dec 18 05:44:01 localhost kernel: [ 1.940063] usbcore: registered new interface driver usbfs
    Dec 18 05:44:01 localhost kernel: [ 1.940080] usbcore: registered new interface driver hub
    Dec 18 05:44:01 localhost kernel: [ 1.940154] usbcore: registered new device driver usb
    Dec 18 05:44:01 localhost kernel: [ 1.943408] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Dec 18 05:44:01 localhost kernel: [ 1.944624] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Dec 18 05:44:01 localhost kernel: [ 1.944657] ehci_hcd 0000:00:12.2: EHCI Host Controller
    Dec 18 05:44:01 localhost kernel: [ 1.945393] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    Dec 18 05:44:01 localhost kernel: [ 1.945404] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Dec 18 05:44:01 localhost kernel: [ 1.945439] ehci_hcd 0000:00:12.2: debug port 1
    Dec 18 05:44:01 localhost kernel: [ 1.945461] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf5fff800
    Dec 18 05:44:01 localhost kernel: [ 1.951104] pata_jmicron 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Dec 18 05:44:01 localhost kernel: [ 1.952684] scsi0 : pata_jmicron
    Dec 18 05:44:01 localhost kernel: [ 1.953053] scsi1 : pata_jmicron
    Dec 18 05:44:01 localhost kernel: [ 1.953358] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    Dec 18 05:44:01 localhost kernel: [ 1.953659] ata1: PATA max UDMA/100 cmd 0xd800 ctl 0xd400 bmdma 0xc400 irq 16
    Dec 18 05:44:01 localhost kernel: [ 1.953661] ata2: PATA max UDMA/100 cmd 0xd000 ctl 0xc800 bmdma 0xc408 irq 16
    Dec 18 05:44:01 localhost kernel: [ 1.953994] hub 1-0:1.0: USB hub found
    Dec 18 05:44:01 localhost kernel: [ 1.953997] hub 1-0:1.0: 5 ports detected
    Dec 18 05:44:01 localhost kernel: [ 1.954242] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Dec 18 05:44:01 localhost kernel: [ 1.954272] ehci_hcd 0000:00:13.2: EHCI Host Controller
    Dec 18 05:44:01 localhost kernel: [ 1.954282] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    Dec 18 05:44:01 localhost kernel: [ 1.954291] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Dec 18 05:44:01 localhost kernel: [ 1.954314] ehci_hcd 0000:00:13.2: debug port 1
    Dec 18 05:44:01 localhost kernel: [ 1.954327] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf5fff400
    Dec 18 05:44:01 localhost kernel: [ 1.963424] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    Dec 18 05:44:01 localhost kernel: [ 1.963654] hub 2-0:1.0: USB hub found
    Dec 18 05:44:01 localhost kernel: [ 1.963657] hub 2-0:1.0: 5 ports detected
    Dec 18 05:44:01 localhost kernel: [ 1.963767] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Dec 18 05:44:01 localhost kernel: [ 1.963782] ehci_hcd 0000:00:16.2: EHCI Host Controller
    Dec 18 05:44:01 localhost kernel: [ 1.963790] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
    Dec 18 05:44:01 localhost kernel: [ 1.963796] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Dec 18 05:44:01 localhost kernel: [ 1.963814] ehci_hcd 0000:00:16.2: debug port 1
    Dec 18 05:44:01 localhost kernel: [ 1.963825] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf5fff000
    Dec 18 05:44:01 localhost kernel: [ 1.973419] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
    Dec 18 05:44:01 localhost kernel: [ 1.973638] hub 3-0:1.0: USB hub found
    Dec 18 05:44:01 localhost kernel: [ 1.973641] hub 3-0:1.0: 4 ports detected
    Dec 18 05:44:01 localhost kernel: [ 1.973743] pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Dec 18 05:44:01 localhost kernel: [ 1.973976] scsi2 : pata_atiixp
    Dec 18 05:44:01 localhost kernel: [ 1.974029] scsi3 : pata_atiixp
    Dec 18 05:44:01 localhost kernel: [ 1.974096] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
    Dec 18 05:44:01 localhost kernel: [ 1.974098] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
    Dec 18 05:44:01 localhost kernel: [ 1.974265] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    Dec 18 05:44:01 localhost kernel: [ 1.974383] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
    Dec 18 05:44:01 localhost kernel: [ 1.974386] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    Dec 18 05:44:01 localhost kernel: [ 1.974883] scsi4 : ahci
    Dec 18 05:44:01 localhost kernel: [ 1.974965] scsi5 : ahci
    Dec 18 05:44:01 localhost kernel: [ 1.975024] scsi6 : ahci
    Dec 18 05:44:01 localhost kernel: [ 1.975080] scsi7 : ahci
    Dec 18 05:44:01 localhost kernel: [ 1.975149] ata5: SATA max UDMA/133 abar m1024@0xf5fffc00 port 0xf5fffd00 irq 42
    Dec 18 05:44:01 localhost kernel: [ 1.975152] ata6: SATA max UDMA/133 abar m1024@0xf5fffc00 port 0xf5fffd80 irq 42
    Dec 18 05:44:01 localhost kernel: [ 1.975154] ata7: SATA max UDMA/133 abar m1024@0xf5fffc00 port 0xf5fffe00 irq 42
    Dec 18 05:44:01 localhost kernel: [ 1.975157] ata8: SATA max UDMA/133 abar m1024@0xf5fffc00 port 0xf5fffe80 irq 42
    Dec 18 05:44:01 localhost kernel: [ 2.041323] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Dec 18 05:44:01 localhost kernel: [ 2.041348] xhci_hcd 0000:02:00.0: xHCI Host Controller
    Dec 18 05:44:01 localhost kernel: [ 2.041360] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
    Dec 18 05:44:01 localhost kernel: [ 2.053833] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Dec 18 05:44:01 localhost kernel: [ 2.063392] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Dec 18 05:44:01 localhost kernel: [ 2.063416] ohci_hcd 0000:00:12.0: OHCI Host Controller
    Dec 18 05:44:01 localhost kernel: [ 2.063422] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 5
    Dec 18 05:44:01 localhost kernel: [ 2.063444] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf5ffe000
    Dec 18 05:44:01 localhost kernel: [ 2.111207] ata1.01: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.04, max UDMA/66
    Dec 18 05:44:01 localhost kernel: [ 2.120869] hub 5-0:1.0: USB hub found
    Dec 18 05:44:01 localhost kernel: [ 2.120874] hub 5-0:1.0: 5 ports detected
    Dec 18 05:44:01 localhost kernel: [ 2.121005] ata1.01: configured for UDMA/66
    Dec 18 05:44:01 localhost kernel: [ 2.124285] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.04 PQ: 0 ANSI: 5
    Dec 18 05:44:01 localhost kernel: [ 2.130032] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Dec 18 05:44:01 localhost kernel: [ 2.130043] ohci_hcd 0000:00:13.0: OHCI Host Controller
    Dec 18 05:44:01 localhost kernel: [ 2.130048] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
    Dec 18 05:44:01 localhost kernel: [ 2.130062] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf5ffd000
    Dec 18 05:44:01 localhost kernel: [ 2.146278] xhci_hcd 0000:02:00.0: irq 18, io mem 0xf7ffe000
    Dec 18 05:44:01 localhost kernel: [ 2.146526] hub 4-0:1.0: USB hub found
    Dec 18 05:44:01 localhost kernel: [ 2.146531] hub 4-0:1.0: 2 ports detected
    Dec 18 05:44:01 localhost kernel: [ 2.146568] xhci_hcd 0000:02:00.0: xHCI Host Controller
    Dec 18 05:44:01 localhost kernel: [ 2.146572] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 7
    Dec 18 05:44:01 localhost kernel: [ 2.149833] hub 7-0:1.0: USB hub found
    Dec 18 05:44:01 localhost kernel: [ 2.149838] hub 7-0:1.0: 2 ports detected
    Dec 18 05:44:01 localhost kernel: [ 2.187563] hub 6-0:1.0: USB hub found
    Dec 18 05:44:01 localhost kernel: [ 2.187568] hub 6-0:1.0: 5 ports detected
    Dec 18 05:44:01 localhost kernel: [ 2.187723] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Dec 18 05:44:01 localhost kernel: [ 2.187736] ohci_hcd 0000:00:14.5: OHCI Host Controller
    Dec 18 05:44:01 localhost kernel: [ 2.187747] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
    Dec 18 05:44:01 localhost kernel: [ 2.187760] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf5ffc000
    Dec 18 05:44:01 localhost kernel: [ 2.244207] hub 8-0:1.0: USB hub found
    Dec 18 05:44:01 localhost kernel: [ 2.244212] hub 8-0:1.0: 2 ports detected
    Dec 18 05:44:01 localhost kernel: [ 2.244296] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Dec 18 05:44:01 localhost kernel: [ 2.244308] ohci_hcd 0000:00:16.0: OHCI Host Controller
    Dec 18 05:44:01 localhost kernel: [ 2.244314] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
    Dec 18 05:44:01 localhost kernel: [ 2.244326] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf5ffb000
    Dec 18 05:44:01 localhost kernel: [ 2.293444] ata8: SATA link down (SStatus 0 SControl 300)
    Dec 18 05:44:01 localhost kernel: [ 2.293504] ata7: SATA link down (SStatus 0 SControl 300)
    Dec 18 05:44:01 localhost kernel: [ 2.293619] ata6: SATA link down (SStatus 0 SControl 300)
    Dec 18 05:44:01 localhost kernel: [ 2.300894] hub 9-0:1.0: USB hub found
    Dec 18 05:44:01 localhost kernel: [ 2.300899] hub 9-0:1.0: 4 ports detected
    Dec 18 05:44:01 localhost kernel: [ 2.450109] usb 5-5: new low speed USB device number 2 using ohci_hcd
    Dec 18 05:44:01 localhost kernel: [ 2.460114] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Dec 18 05:44:01 localhost kernel: [ 2.461170] ata5.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
    Dec 18 05:44:01 localhost kernel: [ 2.461173] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    Dec 18 05:44:01 localhost kernel: [ 2.462310] ata5.00: configured for UDMA/133
    Dec 18 05:44:01 localhost kernel: [ 2.462468] scsi 4:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
    Dec 18 05:44:01 localhost kernel: [ 2.469243] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    Dec 18 05:44:01 localhost kernel: [ 2.469272] sd 4:0:0:0: [sda] Write Protect is off
    Dec 18 05:44:01 localhost kernel: [ 2.469287] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Dec 18 05:44:01 localhost kernel: [ 2.565341] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 > sda3
    Dec 18 05:44:01 localhost kernel: [ 2.566087] sd 4:0:0:0: [sda] Attached SCSI disk
    Dec 18 05:44:01 localhost kernel: [ 2.568862] sr0: scsi3-mmc drive: 125x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Dec 18 05:44:01 localhost kernel: [ 2.568870] cdrom: Uniform CD-ROM driver Revision: 3.20
    Dec 18 05:44:01 localhost kernel: [ 2.613856] input: HID 04b4:0033 as /devices/pci0000:00/0000:00:12.0/usb5/5-5/5-5:1.0/input/input0
    Dec 18 05:44:01 localhost kernel: [ 2.613933] generic-usb 0003:04B4:0033.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b4:0033] on usb-0000:00:12.0-5/input0
    Dec 18 05:44:01 localhost kernel: [ 2.613944] usbcore: registered new interface driver usbhid
    Dec 18 05:44:01 localhost kernel: [ 2.613945] usbhid: USB HID core driver
    Dec 18 05:44:01 localhost kernel: [ 2.633456] Refined TSC clocksource calibration: 2999.945 MHz.
    Dec 18 05:44:01 localhost kernel: [ 2.633470] Switching to clocksource tsc
    Dec 18 05:44:01 localhost kernel: [ 2.713602] usb 7-1: new SuperSpeed USB device number 2 using xhci_hcd
    Dec 18 05:44:01 localhost kernel: [ 2.728379] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
    Dec 18 05:44:01 localhost kernel: [ 2.728752] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
    Dec 18 05:44:01 localhost kernel: [ 2.729127] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
    Dec 18 05:44:01 localhost kernel: [ 2.729502] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
    Dec 18 05:44:01 localhost kernel: [ 2.732609] Initializing USB Mass Storage driver...
    Dec 18 05:44:01 localhost kernel: [ 2.732752] scsi8 : usb-storage 7-1:1.0
    Dec 18 05:44:01 localhost kernel: [ 2.732875] usbcore: registered new interface driver usb-storage
    Dec 18 05:44:01 localhost kernel: [ 2.732877] USB Mass Storage support registered.
    Dec 18 05:44:01 localhost kernel: [ 2.860110] usb 6-1: new low speed USB device number 2 using ohci_hcd
    Dec 18 05:44:01 localhost kernel: [ 3.027695] input: USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb6/6-1/6-1:1.0/input/input1
    Dec 18 05:44:01 localhost kernel: [ 3.027783] generic-usb 0003:099A:0721.0002: input,hidraw1: USB HID v1.00 Keyboard [USB Keyboard] on usb-0000:00:13.0-1/input0
    Dec 18 05:44:01 localhost kernel: [ 3.035682] input: USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb6/6-1/6-1:1.1/input/input2
    Dec 18 05:44

    As requested; thanks.
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    I also may have posted the logs from the wrong system last night; I was tired.
    Edit: original logs are correct.
    Last edited by YellowSnowIsBad (2011-12-18 18:03:52)

  • NSS DRIVE NOT LOADING

    Hi
    I recently did an online udpate and after a few hours my groupwise stopped working. I checked out the issue and it seems my NSS drive storing my GWDATA is not mounting, I am running a hyper V environment and the scsi drive has enough storage.
    Server details
    LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-x86_64:core-3.2-x86_64:core-4.0-x86_64"
    Novell Open Enterprise Server 11 (x86_64)
    VERSION = 11.1
    PATCHLEVEL = 1
    SUSE Linux Enterprise Server 11 (x86_64)
    VERSION = 11
    PATCHLEVEL = 2
    Linux rem-now-01 3.0.101-0.5-default #1 SMP Thu Oct 31 05:21:34 UTC 2013 (36fae46) x86_64 x86_64 x86_64 GNU/Linux
    I have attached the boot message for reference.
    These services have failed to load
    Master Resource Control: runlevel 5 has been reached
    Failed services in runlevel 5: novell-nss novell-xregd grpwise
    Skipped services in runlevel 5: nfs smbfs smartd
    Any ideas where to start?
    klogd 1.4.1, log source = ksyslog started.
    <6>[ 0.000000] Initializing cgroup subsys cpuset
    <6>[ 0.000000] Initializing cgroup subsys cpu
    <5>[ 0.000000] Linux version 3.0.101-0.5-default (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Thu Oct 31 05:21:34 UTC 2013 (36fae46)
    <6>[ 0.000000] Command line: root=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 resume=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1 splash=silent crashkernel=256M-:128M vga=0x31a
    <6>[ 0.000000] BIOS-provided physical RAM map:
    <6>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    <6>[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    <6>[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    <6>[ 0.000000] BIOS-e820: 0000000000100000 - 00000000f7ff0000 (usable)
    <6>[ 0.000000] BIOS-e820: 00000000f7ff0000 - 00000000f7fff000 (ACPI data)
    <6>[ 0.000000] BIOS-e820: 00000000f7fff000 - 00000000f8000000 (ACPI NVS)
    <6>[ 0.000000] BIOS-e820: 0000000100000000 - 0000000208000000 (usable)
    <6>[ 0.000000] NX (Execute Disable) protection: active
    <6>[ 0.000000] DMI 2.3 present.
    <7>[ 0.000000] DMI: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 05/23/2012
    <6>[ 0.000000] Hypervisor detected: Microsoft HyperV
    <6>[ 0.000000] HyperV: features 0xe7f, hints 0x2c
    <7>[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    <7>[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    <6>[ 0.000000] No AGP bridge found
    <6>[ 0.000000] last_pfn = 0x208000 max_arch_pfn = 0x400000000
    <7>[ 0.000000] MTRR default type: uncachable
    <7>[ 0.000000] MTRR fixed ranges enabled:
    <7>[ 0.000000] 00000-9FFFF write-back
    <7>[ 0.000000] A0000-DFFFF uncachable
    <7>[ 0.000000] E0000-FFFFF write-back
    <7>[ 0.000000] MTRR variable ranges enabled:
    <7>[ 0.000000] 0 base 0000000000 mask FF00000000 write-back
    <7>[ 0.000000] 1 base 0100000000 mask F000000000 write-back
    <7>[ 0.000000] 2 disabled
    <7>[ 0.000000] 3 disabled
    <7>[ 0.000000] 4 disabled
    <7>[ 0.000000] 5 disabled
    <7>[ 0.000000] 6 disabled
    <7>[ 0.000000] 7 disabled
    <6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    <6>[ 0.000000] last_pfn = 0xf7ff0 max_arch_pfn = 0x400000000
    <6>[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    <7>[ 0.000000] initial memory mapped : 0 - 20000000
    <7>[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    <6>[ 0.000000] init_memory_mapping: 0000000000000000-00000000f7ff0000
    <7>[ 0.000000] 0000000000 - 00f7e00000 page 2M
    <7>[ 0.000000] 00f7e00000 - 00f7ff0000 page 4k
    <7>[ 0.000000] kernel direct mapping tables up to 0xf7feffff @ [mem 0x1fffa000-0x1fffffff]
    <6>[ 0.000000] init_memory_mapping: 0000000100000000-0000000208000000
    <7>[ 0.000000] 0100000000 - 0208000000 page 2M
    <7>[ 0.000000] kernel direct mapping tables up to 0x207ffffff @ [mem 0xf7fea000-0xf7feffff]
    <6>[ 0.000000] nmi ring buffer: 262144
    <6>[ 0.000000] RAMDISK: 37905000 - 37ff0000
    <6>[ 0.000000] Reserving 128MB of memory at 752MB for crashkernel (System RAM: 8320MB)
    <4>[ 0.000000] ACPI: RSDP 00000000000f56f0 00014 (v00 ACPIAM)
    <4>[ 0.000000] ACPI: RSDT 00000000f7ff0000 00040 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
    <4>[ 0.000000] ACPI: FACP 00000000f7ff0200 00081 (v02 VRTUAL MICROSFT 05001223 MSFT 00000097)
    <4>[ 0.000000] ACPI: DSDT 00000000f7ff1724 02E78 (v01 MSFTVM MSFTVM02 00000002 INTL 02002026)
    <4>[ 0.000000] ACPI: FACS 00000000f7fff000 00040
    <4>[ 0.000000] ACPI: WAET 00000000f7ff1480 00028 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
    <4>[ 0.000000] ACPI: SLIC 00000000f7ff14c0 00176 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
    <4>[ 0.000000] ACPI: OEM0 00000000f7ff16c0 00064 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
    <4>[ 0.000000] ACPI: SRAT 00000000f7ff0600 00100 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
    <4>[ 0.000000] ACPI: APIC 00000000f7ff0300 0024C (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
    <4>[ 0.000000] ACPI: OEMB 00000000f7fff040 00064 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
    <7>[ 0.000000] ACPI: Local APIC address 0xfee00000
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0
    <6>[ 0.000000] SRAT: Node 0 PXM 0 0-f8000000
    <6>[ 0.000000] SRAT: Node 0 PXM 0 100000000-208000000
    <6>[ 0.000000] NUMA: Node 0 [0,f8000000) + [100000000,208000000) -> [0,208000000)
    <6>[ 0.000000] Initmem setup node 0 0000000000000000-0000000208000000
    <6>[ 0.000000] NODE_DATA [0000000207f99000 - 0000000207fbffff]
    <7>[ 0.000000] [ffffea0000000000-ffffea00071fffff] PMD -> [ffff8801ff600000-ffff8802067fffff] on node 0
    <4>[ 0.000000] Zone PFN ranges:
    <4>[ 0.000000] DMA 0x00000010 -> 0x00001000
    <4>[ 0.000000] DMA32 0x00001000 -> 0x00100000
    <4>[ 0.000000] Normal 0x00100000 -> 0x00208000
    <4>[ 0.000000] Movable zone start PFN for each node
    <4>[ 0.000000] early_node_map[3] active PFN ranges
    <4>[ 0.000000] 0: 0x00000010 -> 0x0000009f
    <4>[ 0.000000] 0: 0x00000100 -> 0x000f7ff0
    <4>[ 0.000000] 0: 0x00100000 -> 0x00208000
    <7>[ 0.000000] On node 0 totalpages: 2097023
    <7>[ 0.000000] DMA zone: 56 pages used for memmap
    <7>[ 0.000000] DMA zone: 5 pages reserved
    <7>[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
    <7>[ 0.000000] DMA32 zone: 14280 pages used for memmap
    <7>[ 0.000000] DMA32 zone: 997416 pages, LIFO batch:31
    <7>[ 0.000000] Normal zone: 14784 pages used for memmap
    <7>[ 0.000000] Normal zone: 1066560 pages, LIFO batch:31
    <6>[ 0.000000] ACPI: PM-Timer IO Port: 0x408
    <7>[ 0.000000] ACPI: Local APIC address 0xfee00000
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x10] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x11] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x12] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x13] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x14] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x15] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x16] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x17] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x18] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x19] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1a] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1b] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1c] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1d] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1e] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x1f] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0x20] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0x21] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0x22] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0x23] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0x24] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0x25] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0x26] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0x27] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0x28] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x29] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x2a] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x2b] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x2c] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x2d] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x2e] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0x2f] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0x30] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0x31] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0x32] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0x33] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0x34] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0x35] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0x36] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0x37] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0x38] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0x39] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0x3a] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0x3b] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0x3c] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0x3d] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0x3e] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x40] lapic_id[0x3f] disabled)
    <6>[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    <6>[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
    <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    <7>[ 0.000000] ACPI: IRQ0 used by override.
    <7>[ 0.000000] ACPI: IRQ2 used by override.
    <7>[ 0.000000] ACPI: IRQ9 used by override.
    <6>[ 0.000000] Using ACPI (MADT) for SMP configuration information
    <6>[ 0.000000] SMP: Allowing 64 CPUs, 56 hotplug CPUs
    <7>[ 0.000000] nr_irqs_gsi: 40
    <6>[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    <6>[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    <6>[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    <6>[ 0.000000] PM: Registered nosave memory: 00000000f7ff0000 - 00000000f7fff000
    <6>[ 0.000000] PM: Registered nosave memory: 00000000f7fff000 - 00000000f8000000
    <6>[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 0000000100000000
    <6>[ 0.000000] Allocating PCI resources starting at f8000000 (gap: f8000000:8000000)
    <6>[ 0.000000] Booting paravirtualized kernel on bare hardware
    <6>[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:1
    <6>[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff880206e00000 s73728 r8192 d20480 u131072
    <7>[ 0.000000] pcpu-alloc: s73728 r8192 d20480 u131072 alloc=1*2097152
    <7>[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
    <7>[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
    <7>[ 0.000000] pcpu-alloc: [0] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
    <7>[ 0.000000] pcpu-alloc: [0] 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
    <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2067898
    <4>[ 0.000000] Policy zone: Normal
    <5>[ 0.000000] Kernel command line: root=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 resume=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1 splash=silent crashkernel=256M-:128M vga=0x31a
    <6>[ 0.000000] bootsplash: silent mode.
    <6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    <6>[ 0.000000] Checking aperture...
    <6>[ 0.000000] No AGP bridge found
    <6>[ 0.000000] Memory: 8043808k/8519680k available (4433k kernel code, 131588k absent, 344284k reserved, 7663k data, 1336k init)
    <6>[ 0.000000] Hierarchical RCU implementation.
    <6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    <6>[ 0.000000] NR_IRQS:262400 nr_irqs:1192 16
    <6>[ 0.000000] Console: colour dummy device 80x25
    <6>[ 0.000000] console [tty0] enabled
    <6>[ 0.000000] allocated 67108864 bytes of page_cgroup
    <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    <4>[ 0.000000] Fast TSC calibration failed
    <4>[ 0.000000] TSC: Unable to calibrate against PIT
    <6>[ 0.000000] TSC: using PMTIMER reference calibration
    <4>[ 0.000000] Detected 3324.942 MHz processor.
    <6>[ 0.012014] Calibrating delay loop (skipped), value calculated using timer frequency.. 6649.88 BogoMIPS (lpj=13299768)
    <6>[ 0.012022] pid_max: default: 65536 minimum: 512
    <4>[ 0.012304] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
    <6>[ 0.012548] Security Framework initialized
    <6>[ 0.012570] AppArmor: AppArmor initialized
    <6>[ 0.013339] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    <6>[ 0.017041] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    <6>[ 0.018119] Mount-cache hash table entries: 256
    <6>[ 0.018332] Initializing cgroup subsys cpuacct
    <6>[ 0.018347] Initializing cgroup subsys memory
    <6>[ 0.018376] Initializing cgroup subsys devices
    <6>[ 0.018381] Initializing cgroup subsys freezer
    <6>[ 0.018384] Initializing cgroup subsys net_cls
    <6>[ 0.018388] Initializing cgroup subsys blkio
    <6>[ 0.018396] Initializing cgroup subsys perf_event
    <6>[ 0.021490] CPU: Physical Processor ID: 0
    <6>[ 0.021495] CPU: Processor Core ID: 0
    <6>[ 0.021500] mce: CPU supports 1 MCE banks
    <6>[ 0.121088] ACPI: Core revision 20110413
    <6>[ 0.124121] Switched APIC routing to physical flat.
    <6>[ 0.204012] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    <6>[ 0.251460] CPU0: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz stepping 02
    <6>[ 0.252015] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
    <4>[ 0.252015] NMI watchdog disabled (cpu0): hardware events not enabled
    <6>[ 0.252015] Booting Node 0, Processors #1
    <7>[ 0.252015] smpboot cpu 1: start_ip = 9a000
    <4>[ 0.264045] NMI watchdog disabled (cpu1): hardware events not enabled
    <4>[ 0.264188] #2
    <7>[ 0.264191] smpboot cpu 2: start_ip = 9a000
    <4>[ 0.284043] NMI watchdog disabled (cpu2): hardware events not enabled
    <4>[ 0.284180] #3
    <7>[ 0.284183] smpboot cpu 3: start_ip = 9a000
    <4>[ 0.300049] NMI watchdog disabled (cpu3): hardware events not enabled
    <4>[ 0.300226] #4
    <7>[ 0.300229] smpboot cpu 4: start_ip = 9a000
    <4>[ 0.320046] NMI watchdog disabled (cpu4): hardware events not enabled
    <4>[ 0.320185] #5
    <7>[ 0.320188] smpboot cpu 5: start_ip = 9a000
    <4>[ 0.336048] NMI watchdog disabled (cpu5): hardware events not enabled
    <4>[ 0.336208] #6
    <7>[ 0.336211] smpboot cpu 6: start_ip = 9a000
    <4>[ 0.356059] NMI watchdog disabled (cpu6): hardware events not enabled
    <4>[ 0.356212] #7
    <7>[ 0.356215] smpboot cpu 7: start_ip = 9a000
    <4>[ 0.376049] NMI watchdog disabled (cpu7): hardware events not enabled
    <6>[ 0.376084] Brought up 8 CPUs
    <6>[ 0.376089] Total of 8 processors activated (53199.07 BogoMIPS).
    <6>[ 0.396382] devtmpfs: initialized
    <6>[ 0.403154] PM: Registering ACPI NVS region at f7fff000 (4096 bytes)
    <6>[ 0.403154] print_constraints: dummy:
    <6>[ 0.403154] Time: 16:35:52 Date: 12/27/13
    <6>[ 0.404195] NET: Registered protocol family 16
    <6>[ 0.404383] ACPI: bus type pci registered
    <6>[ 0.404749] PCI: Using configuration type 1 for base access
    <6>[ 0.405534] bio: create slab <bio-0> at 0
    <7>[ 0.410275] ACPI: EC: Look up EC in DSDT
    <6>[ 0.413902] ACPI: Interpreter enabled
    <6>[ 0.413910] ACPI: (supports S0 S5)
    <6>[ 0.413929] ACPI: Using IOAPIC for interrupt routing
    <6>[ 0.426448] ACPI: No dock devices found.
    <6>[ 0.426456] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    <6>[ 0.427535] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    <6>[ 0.429730] pci_root PNP0A03:00: host bridge window [mem 0xfe0000000-0xfffefffff]
    <6>[ 0.429738] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    <6>[ 0.429743] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    <6>[ 0.429748] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    <6>[ 0.429754] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfffbffff]
    <7>[ 0.429922] pci 0000:00:00.0: [8086:7192] type 0 class 0x000600
    <7>[ 0.431592] pci 0000:00:07.0: [8086:7110] type 0 class 0x000601
    <7>[ 0.434290] pci 0000:00:07.1: [8086:7111] type 0 class 0x000101
    <7>[ 0.436389] pci 0000:00:07.1: reg 20: [io 0xffa0-0xffaf]
    <7>[ 0.437608] pci 0000:00:07.3: [8086:7113] type 0 class 0x000680
    <4>[ 0.437647] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
    <4>[ 0.437649] * this clock source is slow. Consider trying other clock sources
    <6>[ 0.439685] pci 0000:00:07.3: quirk: [io 0x0400-0x043f] claimed by PIIX4 ACPI
    <7>[ 0.440542] pci 0000:00:08.0: [1414:5353] type 0 class 0x000300
    <7>[ 0.442475] pci 0000:00:08.0: reg 10: [mem 0xf8000000-0xfbffffff]
    <7>[ 0.445307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    <6>[ 0.445568] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
    <6>[ 0.446013] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    <6>[ 0.446236] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    <6>[ 0.446462] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    <6>[ 0.446686] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    <6>[ 0.446918] vgaarb: device added: PCI:0000:00:08.0,decodes=io+mem,owns=io+mem,locks= none
    <6>[ 0.446926] vgaarb: loaded
    <6>[ 0.447035] PCI: Using ACPI for IRQ routing
    <7>[ 0.447035] PCI: pci_cache_line_size set to 64 bytes
    <7>[ 0.447035] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    <7>[ 0.447035] reserve RAM buffer: 00000000f7ff0000 - 00000000f7ffffff
    <6>[ 0.447035] NetLabel: Initializing
    <6>[ 0.447035] NetLabel: domain hash size = 128
    <6>[ 0.447035] NetLabel: protocols = UNLABELED CIPSOv4
    <6>[ 0.447035] NetLabel: unlabeled traffic allowed by default
    <6>[ 0.447035] Switching to clocksource hyperv_clocksource
    <6>[ 0.447035] AppArmor: AppArmor Filesystem Enabled
    <6>[ 0.447035] pnp: PnP ACPI init
    <6>[ 0.447035] ACPI: bus type pnp registered
    <7>[ 0.447832] pnp 00:00: [mem 0xfe0000000-0xfffefffff window]
    <7>[ 0.447836] pnp 00:00: [bus 00-ff]
    <7>[ 0.447838] pnp 00:00: [io 0x0cf8-0x0cff]
    <7>[ 0.447841] pnp 00:00: [io 0x0000-0x0cf7 window]
    <7>[ 0.447844] pnp 00:00: [io 0x0d00-0xffff window]
    <7>[ 0.447847] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    <7>[ 0.447849] pnp 00:00: [mem 0x00000000 window]
    <7>[ 0.447852] pnp 00:00: [mem 0xf8000000-0xfffbffff window]
    <7>[ 0.447893] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    <7>[ 0.447932] pnp 00:01: [dma 4]
    <7>[ 0.447934] pnp 00:01: [io 0x0000-0x000f]
    <7>[ 0.447937] pnp 00:01: [io 0x0081-0x0083]
    <7>[ 0.447939] pnp 00:01: [io 0x0087]
    <7>[ 0.447941] pnp 00:01: [io 0x0089-0x008b]
    <7>[ 0.447944] pnp 00:01: [io 0x008f]
    <7>[ 0.447946] pnp 00:01: [io 0x00c0-0x00df]
    <7>[ 0.447974] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    <7>[ 0.447990] pnp 00:02: [io 0x0070-0x0071]
    <7>[ 0.452329] pnp 00:02: [irq 8]
    <7>[ 0.452369] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    <7>[ 0.452425] pnp 00:03: [io 0x0060]
    <7>[ 0.452428] pnp 00:03: [io 0x0064]
    <7>[ 0.455932] pnp 00:03: [irq 1]
    <7>[ 0.455975] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    <7>[ 0.458641] pnp 00:04: [irq 12]
    <7>[ 0.458684] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    <7>[ 0.458703] pnp 00:05: [io 0x0061]
    <7>[ 0.458735] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    <7>[ 0.458749] pnp 00:06: [io 0x00f0-0x00ff]
    <7>[ 0.461312] pnp 00:06: [irq 13]
    <7>[ 0.461353] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    <7>[ 0.463988] pnp 00:07: [irq 4]
    <7>[ 0.463992] pnp 00:07: [dma 0 disabled]
    <7>[ 0.463995] pnp 00:07: [io 0x03f8-0x03ff]
    <7>[ 0.464054] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    <7>[ 0.466278] pnp 00:08: [irq 3]
    <7>[ 0.466282] pnp 00:08: [dma 0 disabled]
    <7>[ 0.466284] pnp 00:08: [io 0x02f8-0x02ff]
    <7>[ 0.466344] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    <7>[ 0.468615] pnp 00:09: [irq 6]
    <7>[ 0.468618] pnp 00:09: [dma 2]
    <7>[ 0.468621] pnp 00:09: [io 0x03f0-0x03f5]
    <7>[ 0.468623] pnp 00:09: [io 0x03f7]
    <7>[ 0.468696] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
    <7>[ 0.468714] pnp 00:0a: [io 0x0010-0x001f]
    <7>[ 0.468717] pnp 00:0a: [io 0x0022-0x003f]
    <7>[ 0.468719] pnp 00:0a: [io 0x0044-0x005f]
    <7>[ 0.468721] pnp 00:0a: [io 0x0062-0x0063]
    <7>[ 0.468723] pnp 00:0a: [io 0x0065-0x006f]
    <7>[ 0.468725] pnp 00:0a: [io 0x0072-0x007f]
    <7>[ 0.468728] pnp 00:0a: [io 0x0080]
    <7>[ 0.468732] pnp 00:0a: [io 0x0084-0x0086]
    <7>[ 0.468734] pnp 00:0a: [io 0x0088]
    <7>[ 0.468736] pnp 00:0a: [io 0x008c-0x008e]
    <7>[ 0.468738] pnp 00:0a: [io 0x0090-0x009f]
    <7>[ 0.468741] pnp 00:0a: [io 0x00a2-0x00bf]
    <7>[ 0.468743] pnp 00:0a: [io 0x00e0-0x00ef]
    <7>[ 0.468745] pnp 00:0a: [io 0x01e0-0x01ef]
    <7>[ 0.468747] pnp 00:0a: [io 0x0160-0x016f]
    <7>[ 0.468749] pnp 00:0a: [io 0x0278-0x027f]
    <7>[ 0.468752] pnp 00:0a: [io 0x0378-0x037f]
    <7>[ 0.468754] pnp 00:0a: [io 0x0678-0x067f]
    <7>[ 0.468756] pnp 00:0a: [io 0x0778-0x077f]
    <7>[ 0.468758] pnp 00:0a: [io 0x04d0-0x04d1]
    <6>[ 0.468806] system 00:0a: [io 0x01e0-0x01ef] has been reserved
    <6>[ 0.468814] system 00:0a: [io 0x0160-0x016f] has been reserved
    <6>[ 0.468819] system 00:0a: [io 0x0278-0x027f] has been reserved
    <6>[ 0.468824] system 00:0a: [io 0x0378-0x037f] has been reserved
    <6>[ 0.468829] system 00:0a: [io 0x0678-0x067f] has been reserved
    <6>[ 0.468834] system 00:0a: [io 0x0778-0x077f] has been reserved
    <6>[ 0.468839] system 00:0a: [io 0x04d0-0x04d1] has been reserved
    <7>[ 0.468844] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    <7>[ 0.469099] pnp 00:0b: [io 0x0400-0x043f]
    <7>[ 0.469102] pnp 00:0b: [io 0x0370-0x0371]
    <7>[ 0.469105] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
    <7>[ 0.469107] pnp 00:0b: [io 0x0440-0x044f]
    <7>[ 0.469110] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
    <7>[ 0.469112] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
    <6>[ 0.469153] system 00:0b: [io 0x0400-0x043f] has been reserved
    <6>[ 0.469159] system 00:0b: [io 0x0370-0x0371] has been reserved
    <6>[ 0.469164] system 00:0b: [io 0x0440-0x044f] has been reserved
    <6>[ 0.469169] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
    <6>[ 0.469175] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
    <7>[ 0.469180] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    <7>[ 0.469364] pnp 00:0c: [mem 0x00000000-0x0009ffff]
    <7>[ 0.469367] pnp 00:0c: [mem 0x000c0000-0x000dffff]
    <7>[ 0.469370] pnp 00:0c: [mem 0x000e0000-0x000fffff]
    <7>[ 0.469372] pnp 00:0c: [mem 0x00100000-0xf7ffffff]
    <7>[ 0.469374] pnp 00:0c: [mem 0xfffc0000-0xffffffff]
    <6>[ 0.469417] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
    <6>[ 0.469423] system 00:0c: [mem 0x000c0000-0x000dffff] could not be reserved
    <6>[ 0.469429] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
    <6>[ 0.469434] system 00:0c: [mem 0x00100000-0xf7ffffff] could not be reserved
    <6>[ 0.469439] system 00:0c: [mem 0xfffc0000-0xffffffff] has been reserved
    <7>[ 0.469445] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    <6>[ 0.469782] pnp: PnP ACPI: found 13 devices
    <6>[ 0.469787] ACPI: ACPI bus type pnp unregistered
    <7>[ 0.476082] PCI: max bus depth: 0 pci_try_num: 1
    <7>[ 0.476089] pci_bus 0000:00: resource 4 [mem 0xfe0000000-0xfffefffff]
    <7>[ 0.476092] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7]
    <7>[ 0.476094] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
    <7>[ 0.476097] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
    <7>[ 0.476100] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfffbffff]
    <6>[ 0.477048] NET: Registered protocol family 2
    <6>[ 0.477558] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    <6>[ 0.479416] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    <6>[ 0.481075] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    <6>[ 0.481261] TCP: Hash tables configured (established 524288 bind 65536)
    <6>[ 0.481266] TCP reno registered
    <6>[ 0.481283] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    <6>[ 0.481335] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    <6>[ 0.482109] NET: Registered protocol family 1
    <6>[ 0.482125] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    <7>[ 0.482366] pci 0000:00:08.0: Boot video device
    <7>[ 0.482406] PCI: CLS 0 bytes, default 64
    <6>[ 0.482455] Unpacking initramfs...
    <6>[ 0.659642] Freeing initrd memory: 7084k freed
    <6>[ 0.661052] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    <6>[ 0.661059] Placing 64MB software IO TLB between ffff8800f3fea000 - ffff8800f7fea000
    <6>[ 0.661064] software IO TLB at phys 0xf3fea000 - 0xf7fea000
    <6>[ 0.668188] audit: initializing netlink socket (disabled)
    <5>[ 0.668208] type=2000 audit(1388162152.664:1): initialized
    <4>[ 0.702880] bounce pool size: 64 pages
    <6>[ 0.702891] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    <5>[ 0.706769] VFS: Disk quotas dquot_6.5.2
    <4>[ 0.706943] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    <6>[ 0.707274] msgmni has been set to 3931
    <6>[ 0.707604] alg: No test for stdrng (krng)
    <6>[ 0.707718] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    <6>[ 0.707801] io scheduler noop registered
    <6>[ 0.707806] io scheduler deadline registered
    <6>[ 0.708005] io scheduler cfq registered (default)
    <6>[ 0.708249] vesafb: mode is 1280x1024x16, linelength=2560, pages=0
    <6>[ 0.708254] vesafb: scrolling: redraw
    <6>[ 0.708258] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    <6>[ 0.708929] vesafb: framebuffer at 0xf8000000, mapped to 0xffffc90001800000, using 4096k, total 4096k
    <6>[ 0.709049] bootsplash 3.2.0-2010/03/31: looking for picture...
    <6>[ 0.709052] bootsplash: silentjpeg size 74123 bytes
    <6>[ 0.731946] bootsplash: ...found (1280x1024, 40629 bytes, v3).
    <6>[ 0.780927] Console: switching to colour frame buffer device 156x60
    <6>[ 0.828743] fb0: VESA VGA frame buffer device
    <6>[ 0.828882] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
    <6>[ 0.831332] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    <6>[ 0.846410] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    <6>[ 0.933902] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    <6>[ 0.945594] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    <6>[ 0.955274] Non-volatile memory driver v1.3
    <6>[ 0.955280] Linux agpgart interface v0.103
    <6>[ 0.955379] Fixed MDIO Bus: probed
    <6>[ 0.955441] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    <6>[ 0.969808] serio: i8042 KBD port at 0x60,0x64 irq 1
    <6>[ 0.969825] serio: i8042 AUX port at 0x60,0x64 irq 12
    <6>[ 0.969915] mousedev: PS/2 mouse device common for all mice
    <6>[ 0.970155] cpuidle: using governor ladder
    <6>[ 0.970161] cpuidle: using governor menu
    <6>[ 0.970165] EFI Variables Facility v0.08 2004-May-17
    <6>[ 0.970592] TCP cubic registered
    <5>[ 0.970609] Registering the dns_resolver key type
    <7>[ 0.970721] PM: Checking hibernation image partition /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
    <6>[ 1.008486] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    <4>[ 1.216294] trackpoint.c: failed to get extended button data
    <6>[ 1.695523] Refined TSC clocksource calibration: 3324.999 MHz.
    <6>[ 4.400574] IBM TrackPoint firmware: 0x01, buttons: 0/0
    <6>[ 4.402228] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input1
    <7>[ 4.402999] PM: Hibernation image not present or could not be loaded.
    <6>[ 4.403017] registered taskstats version 1
    <6>[ 4.404389] Magic number: 9:792:591
    <6>[ 4.409458] Freeing unused kernel memory: 1336k freed
    <6>[ 4.409736] Write protecting the kernel read-only data: 10240k
    <6>[ 4.417078] Freeing unused kernel memory: 1692k freed
    <6>[ 4.421718] Freeing unused kernel memory: 1000k freed
    <5>[ 4.495042] SCSI subsystem initialized
    <7>[ 4.497920] libata version 3.00 loaded.
    <7>[ 4.504287] ata_piix 0000:00:07.1: version 2.13
    <6>[ 4.504462] ata_piix 0000:00:07.1: Hyper-V Virtual Machine detected, ATA device ignore set
    <7>[ 4.504682] ata_piix 0000:00:07.1: setting latency timer to 64
    <6>[ 4.508495] scsi0 : ata_piix
    <6>[ 4.509022] scsi1 : ata_piix
    <6>[ 4.510514] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    <6>[ 4.510655] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    <6>[ 4.677885] ata2.00: ATAPI: Virtual CD, , max MWDMA2
    <7>[ 4.678807] ata1.00: host indicates ignore ATA devices, ignored
    <6>[ 4.678980] ata1.01: ATAPI: Virtual CD, , max MWDMA2
    <6>[ 4.681960] ata2.00: configured for MWDMA2
    <6>[ 4.683187] ata1.01: configured for MWDMA2
    <5>[ 4.687680] scsi 0:0:1:0: CD-ROM Msft Virtual CD/ROM 1.0 PQ: 0 ANSI: 5
    <5>[ 4.689758] scsi 1:0:0:0: CD-ROM Msft Virtual CD/ROM 1.0 PQ: 0 ANSI: 5
    <6>[ 4.708425] hv_vmbus: Hyper-V Host OS Build:9200-6.2-16-0.16729
    <6>[ 4.712400] hv_vmbus: Negotiated host information 13
    <6>[ 4.712845] hv_vmbus: child device vmbus_0_1 registered
    <6>[ 4.713110] hv_vmbus: child device vmbus_0_2 registered
    <6>[ 4.713394] hv_vmbus: child device vmbus_0_3 registered
    <6>[ 4.713669] hv_vmbus: child device vmbus_0_4 registered
    <6>[ 4.713974] hv_vmbus: child device vmbus_0_5 registered
    <6>[ 4.714247] hv_vmbus: child device vmbus_0_6 registered
    <6>[ 4.714521] hv_vmbus: child device vmbus_0_7 registered
    <6>[ 4.714799] hv_vmbus: child device vmbus_0_8 registered
    <6>[ 4.715094] hv_vmbus: child device vmbus_0_9 registered
    <6>[ 4.715367] hv_vmbus: child device vmbus_0_10 registered
    <6>[ 4.715643] hv_vmbus: child device vmbus_0_11 registered
    <6>[ 4.715912] hv_vmbus: child device vmbus_0_12 registered
    <6>[ 9.693609] hv_vmbus: registering driver hv_storvsc
    <6>[ 9.694468] scsi2 : storvsc_host_t
    <5>[ 9.695151] scsi 2:0:0:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 4
    <6>[ 9.695843] scsi3 : storvsc_host_t
    <6>[ 9.696625] scsi scan: INQUIRY result too short (5), using 36
    <5>[ 9.697436] scsi 3:0:0:1: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 4
    <6>[ 9.698016] scsi scan: INQUIRY result too short (5), using 36
    <6>[ 14.687376] hp_sw: device handler registered
    <6>[ 14.695768] rdac: device handler registered
    <6>[ 14.703207] alua: device handler registered
    <6>[ 14.711258] emc: device handler registered
    <6>[ 14.716329] udev: starting version 147
    <7>[ 14.744338] ACPI: acpi_idle registered with cpuidle
    <6>[ 14.749183] hv_vmbus: registering driver hv_netvsc
    <6>[ 14.750531] hv_netvsc: hv_netvsc channel opened successfully
    <5>[ 14.754431] sd 2:0:0:0: [sda] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
    <5>[ 14.754627] sd 3:0:0:1: [sdb] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
    <5>[ 14.754770] sd 2:0:0:0: [sda] Write Protect is off
    <7>[ 14.754920] sd 2:0:0:0: [sda] Mode Sense: 0f 00 00 00
    <5>[ 14.754929] sd 3:0:0:1: [sdb] Write Protect is off
    <7>[ 14.755076] sd 3:0:0:1: [sdb] Mode Sense: 0f 00 00 00
    <5>[ 14.755136] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    <5>[ 14.755365] sd 3:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    <6>[ 14.756100] sdb: sdb1
    <5>[ 14.756539] sd 3:0:0:1: [sdb] Attached SCSI disk
    <6>[ 14.760677] sda: sda1 sda2
    <5>[ 14.761170] sd 2:0:0:0: [sda] Attached SCSI disk
    <6>[ 14.853739] hv_netvsc vmbus_0_11: Device MAC 00:15:5d:06:83:03 link state up
    <7>[ 19.909479] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
    <7>[ 19.909485] PM: Marking nosave pages: 00000000f7ff0000 - 0000000100000000
    <7>[ 19.909724] PM: Basic memory bitmaps created
    <7>[ 19.948242] PM: Basic memory bitmaps freed
    <6>[ 19.959506] PM: Starting manual resume from disk
    <7>[ 19.959648] PM: Hibernation image partition 8:1 present
    <7>[ 19.959650] PM: Looking for hibernation image.
    <7>[ 19.961619] PM: Image not found (code -22)
    <7>[ 19.961622] PM: Hibernation image not present or could not be loaded.
    <6>[ 20.136385] kjournald starting. Commit interval 15 seconds
    <6>[ 20.136764] EXT3-fs (sda2): using internal journal
    <6>[ 20.136899] EXT3-fs (sda2): mounted filesystem with ordered data mode
    <6>[ 21.569339] udev: starting version 147
    <4>[ 21.628664] sr0: scsi3-mmc drive: 0x/0x tray
    <6>[ 21.628807] cdrom: Uniform CD-ROM driver Revision: 3.20
    <7>[ 21.629053] sr 0:0:1:0: Attached scsi CD-ROM sr0
    <4>[ 21.632902] sr1: scsi3-mmc drive: 0x/0x tray
    <7>[ 21.633138] sr 1:0:0:0: Attached scsi CD-ROM sr1
    <5>[ 21.670559] sr 0:0:1:0: Attached scsi generic sg0 type 5
    <5>[ 21.670736] sr 1:0:0:0: Attached scsi generic sg1 type 5
    <5>[ 21.670913] sd 2:0:0:0: Attached scsi generic sg2 type 0
    <5>[ 21.671088] sd 3:0:0:1: Attached scsi generic sg3 type 0
    <6>[ 21.694963] input: PC Speaker as /devices/platform/pcspkr/input/input2
    <6>[ 21.738202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    <6>[ 21.738681] ACPI: Power Button [PWRF]
    <6>[ 21.739750] hv_utils: Registering HyperV Utility Driver
    <6>[ 21.739888] hv_vmbus: registering driver hv_util
    <6>[ 21.741454] hv_vmbus: child device vmbus_0_5 unregistered
    <3>[ 21.855470] piix4_smbus 0000:00:07.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
    <6>[ 21.863250] Floppy drive(s): fd0 is 1.44M
    <6>[ 21.890107] FDC 0 is an 82078.
    <6>[ 21.937189] rtc_cmos 00:02: RTC can wake from S4
    <6>[ 21.958729] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    <6>[ 21.964296] rtc0: alarms up to one month, 114 bytes nvram
    <6>[ 22.068854] hv_vmbus: registering driver hid_hyperv
    <6>[ 22.070603] input: Microsoft Vmbus HID-compliant Mouse as /devices/virtual/input/input4
    <6>[ 22.070814] hid 0006:045E:0621.0001: input: <UNKNOWN> HID v0.01 Mouse [Microsoft Vmbus HID-compliant Mouse] on
    <6>[ 27.106125] Adding 2103292k swap on /dev/sda1. Priority:-1 extents:1 across:2103292k
    <6>[ 28.737563] device-mapper: uevent: version 1.0.3
    <6>[ 28.738201] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
    <6>[ 29.026019] loop: module loaded
    <6>[ 30.169641] fuse init (API version 7.16)
    Kernel logging (ksyslog) stopped.
    Kernel log daemon terminating.
    Boot logging started on /dev/tty1(/dev/console) at Sat Dec 28 03:36:11 2013
    Trying manual resume from /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
    Invoking userspace resume from /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
    resume: libgcrypt version: 1.5.0
    Trying manual resume from /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
    Invoking in-kernel resume from /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
    Waiting for device /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 to appear: ok
    fsck from util-linux 2.19.1
    [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda2
    /dev/sda2: clean, 296531/2490368 files, 1999842/9959680 blocks
    fsck succeeded. Mounting root device read-write.
    Mounting root /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    mount -o rw,acl,user_xattr -t ext3 /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 /root
    Boot logging started on /dev/tty1(/dev/console) at Sat Dec 28 03:36:13 2013
    <notice -- Dec 28 03:36:13.332905000>
    boot.debugfs start
    Mounting debugfs at /sys/kernel/debugdone
    <notice -- Dec 28 03:36:13.369284000>
    'boot.debugfs start' exits with status 0
    <notice -- Dec 28 03:36:13.371108000>
    boot.udev start
    Starting udevd: done
    Loading drivers, configuring devices: done
    <notice -- Dec 27 20:10:55.354414000>
    'boot.udev start' exits with status 0
    <notice -- Dec 27 20:10:55.355966000>
    boot.rootfsck start
    Activating swap-devices in /etc/fstab...
    done
    <notice -- Dec 27 20:10:55.398783000>
    'boot.rootfsck start' exits with status 0
    <notice -- Dec 27 20:10:55.400577000>
    boot.clock start
    Set System Time to the current Hardware Clockdone
    <notice -- Dec 27 20:10:56.942379000>
    'boot.clock start' exits with status 0
    <notice -- Dec 27 20:10:56.944352000>
    boot.device-mapper start
    Activating device mapper...
    done
    <notice -- Dec 27 20:10:57.20179000>
    'boot.device-mapper start' exits with status 0
    <notice -- Dec 27 20:10:57.22434000>
    boot.loadmodules start
    Loading required kernel modules
    done
    <notice -- Dec 27 20:10:57.46596000>
    'boot.loadmodules start' exits with status 0
    <notice -- Dec 27 20:10:57.48288000>
    boot.md start
    Starting MD RAID unused
    <notice -- Dec 27 20:10:57.112371000>
    'boot.md start' exits with status 6
    <notice -- Dec 27 20:10:57.114441000>
    boot.localfs start
    Checking file systems...
    fsck from util-linux 2.19.1
    doneMounting local file systems...
    proc on /proc type proc (rw)
    sysfs on /sys type sysfs (rw)
    debugfs on /sys/kernel/debug type debugfs (rw)
    udev on /dev type tmpfs (rw,mode=0755)
    tmpfs on /dev/shm type tmpfs (rw,mode=1777)
    devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
    nothing was mounted
    done
    <notice -- Dec 27 20:10:57.331387000>
    'boot.localfs start' exits with status 0
    <notice -- Dec 27 20:10:57.332580000>
    boot.compliance start
    Check if the profiles matches the systemdone
    <notice -- Dec 27 20:10:58.355993000>
    'boot.compliance start' exits with status 0
    <notice -- Dec 27 20:10:58.357530000>
    boot.cycle start
    <notice -- Dec 27 20:10:58.399207000>
    'boot.cycle start' exits with status 6
    <notice -- Dec 27 20:10:58.401339000>
    boot.fuse start
    Loading fuse module done
    Mounting fuse control filesystemdone
    <notice -- Dec 27 20:10:58.458495000>
    'boot.fuse start' exits with status 0
    <notice -- Dec 27 20:10:58.460101000>
    boot.klog start
    Creating /var/log/boot.msg
    done
    <notice -- Dec 27 20:10:58.549404000>
    pidofproc: /sbin/blogd
    407
    <notice -- Dec 27 20:10:58.571980000>
    killproc: kill(407,29)
    <notice -- Dec 27 20:10:58.579244000> 'boot.klog start' exits with status 0
    <notice -- Dec 27 20:10:58.581541000> boot.lvm_monitor start
    Enabling monitoring on LVM volume groups...
    No volume groups found
    done
    <notice -- Dec 27 20:10:58.735165000> 'boot.lvm_monitor start' exits with status 0
    <notice -- Dec 27 20:10:58.736906000> boot.proc start
    <notice -- Dec 27 20:10:58.773908000> 'boot.proc start' exits with status 0
    <notice -- Dec 27 20:10:58.775634000> boot.scpm start
    <notice -- Dec 27 20:10:58.817985000> 'boot.scpm start' exits with status 0
    <notice -- Dec 27 20:10:58.819520000> boot.swap start
    Activating remaining swap-devices in /etc/fstab...
    done
    <notice -- Dec 27 20:10:58.890568000>
    'boot.swap start' exits with status 0
    <notice -- Dec 27 20:10:58.892520000> boot.udev_retry start
    <notice -- Dec 27 20:10:58.931843000>
    'boot.udev_retry start' exits with status 0
    <notice -- Dec 27 20:10:58.933759000> boot.ldconfig start
    <notice -- Dec 27 20:10:59.80965000> 'boot.ldconfig start' exits with status 0
    <notice -- Dec 27 20:10:59.83077000> boot.quota start
    Turning quota on
    Checking quotas. This may take some time.
    done
    <notice -- Dec 27 20:10:59.144356000> 'boot.quota start' exits with status 0
    <notice -- Dec 27 20:10:59.146277000> boot.sysctl start
    Setting current sysctl status from /etc/sysctl.confdone
    <notice -- Dec 27 20:10:59.201868000> 'boot.sysctl start' exits with status 0
    <notice -- Dec 27 20:10:59.203812000> boot.cleanup start
    <notice -- Dec 27 20:11:00.59571000> pidofproc: /sbin/blogd 407
    <notice -- Dec 27 20:11:00.344682000>
    'boot.cleanup start' exits with status 0
    <notice -- Dec 27 20:11:00.346899000> boot.ipconfig start
    Enabling syn flood protectiondone
    Disabling IP forwardingdone
    done
    <notice -- Dec 27 20:11:00.396956000> 'boot.ipconfig start' exits with status 0
    <notice -- Dec 27 20:11:00.398786000> boot.apparmor start
    Starting AppArmor Mounting securityfs on /sys/kernel/security done
    done
    <notice -- Dec 27 20:11:01.800318000> 'boot.apparmor start' exits with status 0
    <notice -- Dec 27 20:11:01.802316000> boot.localnet start
    Setting up hostname 'rem-now-01'done
    Setting up loopback interface lo
    lo IP address: 127.0.0.1/8
    IP address: 127.0.0.2/8
    done
    <notice -- Dec 27 20:11:02.188822000>
    'boot.localnet start' exits with status 0
    <notice -- Dec 27 20:11:02.190205000> boot.kdump start
    Loading kdump
    done
    <notice -- Dec 27 20:11:02.907821000> 'boot.kdump start' exits with status 0
    System Boot Control: The system has been set up
    Skipped features: boot.md boot.cycle
    System Boot Control: Running /etc/init.d/boot.local
    done
    INIT: Entering runlevel: 5
    Master Resource Control: previous runlevel: N, switching to runlevel: 5
    <notice -- Dec 27 20:11:03.110539000> acpid start
    Starting acpid
    <notice -- Dec 27 20:11:03.153151000> startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console SELINUX_INIT=YES ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 _=/sbin/startproc DAEMON=/sbin/acpid ]
    acpid: starting up
    done
    <notice -- Dec 27 20:11:03.166295000> 'acpid start' exits with status 0
    <notice -- Dec 27 20:11:03.168126000>
    dbus start
    acpid: 2 rules loaded
    Starting D-Bus daemondone
    <notice -- Dec 27 20:11:03.428391000> 'dbus start' exits with status 0
    <notice -- Dec 27 20:11:03.430244000> earlysyslog start
    Starting syslog services
    <notice -- Dec 27 20:11:03.492560000>
    startproc: execve (/sbin/syslog-ng) [
    /sbin/syslog-ng
    SELINUX_INIT=YES
    CONSOLE=/dev/console
    ROOTFS_FSTYPE=ext3
    TERM=linux
    SHELL=/bin/sh
    ROOTFS_FSCK=0
    crashkernel=256M-:128M
    LC_ALL=POSIX
    INIT_VERSION=sysvinit-2.86
    REDIRECT=/dev/tty1
    COLUMNS=156
    PATH=/bin:/sbin:/usr/bin:/usr/sbin
    DO_CONFIRM=
    vga=0x31a
    RUNLEVEL=5
    SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
    PWD=/
    PREVLEVEL=N
    LINES=60
    SHLVL=2
    HOME=/
    SPLASH=yes
    splash=silent
    ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    _=/sbin/startproc
    DAEMON=/sbin/syslog-ng
    <notice -- Dec 27 20:11:03.559776000> startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ SELINUX_INIT=YES CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    _=/sbin/startproc DAEMON=/sbin/klogd ]
    done
    <notice -- Dec 27 20:11:03.570513000> 'earlysyslog start' exits with status 0
    <notice -- Dec 27 20:11:03.572386000>
    fbset start
    <notice -- Dec 27 20:11:03.604926000> 'fbset start' exits with status 0
    <notice -- Dec 27 20:11:03.606796000> micasad start
    Starting miCASA daemondone
    <notice -- Dec 27 20:11:05.737324000> 'micasad start' exits with status 0
    <notice -- Dec 27 20:11:05.739136000> microcode.ctl start
    Checking CPU.. upload Intel microcodedone
    <notice -- Dec 27 20:11:05.995091000>
    'microcode.ctl start' exits with status 0
    <notice -- Dec 27 20:11:05.996419000> purge-kernels start
    <notice -- Dec 27 20:11:06.24241000> 'purge-kernels start' exits with status 0
    <notice -- Dec 27 20:11:06.25539000> random start
    Initializing random number generatordone
    <notice -- Dec 27 20:11:06.81102000> 'random start' exits with status 0
    <notice -- Dec 27 20:11:06.82673000> haldaemon start
    Loading CPUFreq modules (CPUFreq not supported)
    Starting HAL daemondone
    <notice -- Dec 27 20:11:07.19742000> 'haldaemon start' exits with status 0
    <notice -- Dec 27 20:11:07.21771000> network start
    <notice -- Dec 27 20:11:07.219643000> checkproc: /sbin/udevd 442<notice -- Dec 27 20:11:07.219718000> checkproc: /sbin/udevd 532<notice -- Dec 27 20:11:07.219728000> checkproc: /sbin/udevd 533<notice -- Dec 27 20:11:07.219735000> checkproc: /sbin/udevd 1409<notice -- Dec 27 20:11:07.219742000> checkproc: /sbin/udevd 1415<notice -- Dec 27 20:11:07.219749000> checkproc: /sbin/udevd 1416<notice -- Dec 27 20:11:07.219755000> checkproc: /sbin/udevd 1426<notice -- Dec 27 20:11:07.219762000> checkproc: /sbin/udevd 1427<notice -- Dec 27 20:11:07.219768000> checkproc: /sbin/udevd
    1439<notice -- Dec 27 20:11:07.219774000> checkproc: /sbin/udevd 1440<notice -- Dec 27 20:11:07.219781000> checkproc: /sbin/udevd 1450<notice -- Dec 27 20:11:07.219787000> checkproc: /sbin/udevd 1453<notice -- Dec 27 20:11:07.219793000> checkproc: /sbin/udevd
    1465<notice -- Dec 27 20:11:07.219800000> checkproc: /sbin/udevd
    1466<notice -- Dec 27 20:11:07.219806000> checkproc: /sbin/udevd 1479<notice -- Dec 27 20:11:07.219812000> checkproc: /sbin/udevd 1480<notice -- Dec 27 20:11:07.219819000> checkproc: /sbin/udevd 1492<notice -- Dec 27 20:11:07.219825000> checkproc: /sbin/udevd 1493<notice -- Dec 27 20:11:07.219831000> checkproc: /sbin/udevd 1504
    Setting up (localfs) network interfaces:
    lo
    lo IP address: 127.0.0.1/8
    IP address: 127.0.0.2/8
    done eth0 name: Virtual Ethernet Card 0
    eth0 IP address: 192.168.0.10/24
    doneSetting up service (localfs) network . . . . . . . . . .done
    <notice -- Dec 27 20:11:08.220701000> 'network start' exits with status 0
    <notice -- Dec 27 20:11:08.222521000>
    novell-httpstkd start
    Starting the Novell Small Http Interface Daemon.
    <notice -- Dec 27 20:11:08.455149000> 'novell-httpstkd start' exits with status 0
    <notice -- Dec 27 20:11:08.457662000>
    syslog start
    <notice -- Dec 27 20:11:08.477565000> 'syslog start' exits with status 0
    <notice -- Dec 27 20:11:08.479072000> auditd start
    Starting auditd
    <notice -- Dec 27 20:11:08.525517000> startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console SELINUX_INIT=YES ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 _=/sbin/startproc DAEMON=/sbin/auditd ]
    done
    <notice -- Dec 27 20:11:08.721488000> 'auditd start' exits with status 0
    <notice -- Dec 27 20:11:08.723477000>
    haveged start
    Starting haveged daemon
    <notice -- Dec 27 20:11:08.772775000>
    startproc: execve (/sbin/haveged) [
    /sbin/haveged
    -w
    1024
    -v
    1
    CONSOLE=/dev/console
    SELINUX_INIT=YES
    ROOTFS_FSTYPE=ext3
    SHELL=/bin/sh
    TERM=linux
    ROOTFS_FSCK=0
    crashkernel=256M-:128M
    LC_ALL=POSIX
    INIT_VERSION=sysvinit-2.86
    REDIRECT=/dev/tty1
    COLUMNS=156
    PATH=/bin:/sbin:/usr/bin:/usr/sbin
    vga=0x31a
    DO_CONFIRM=
    RUNLEVEL=5
    PWD=/
    SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
    PREVLEVEL=N
    LINES=60
    HOME=/
    SHLVL=2
    splash=silent
    SPLASH=yes
    ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    _=/sbin/startproc
    DAEMON=/sbin/haveged
    done
    <notice -- Dec 27 20:11:08.977862000> 'haveged start' exits with status 0
    <notice -- Dec 27 20:11:08.979577000> rpcbind start
    Starting rpcbind
    <notice -- Dec 27 20:11:09.33208000> startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [ CONSOLE=/dev/console SELINUX_INIT=YES ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 _=/sbin/startproc DAEMON=/sbin/rpcbind ]
    done
    <notice -- Dec 27 20:11:09.106169000> 'rpcbind start' exits with status 0
    <notice -- Dec 27 20:11:09.107657000>
    splash_early start
    <notice -- Dec 27 20:11:09.150175000>
    'splash_early start' exits with status 0
    <notice -- Dec 27 20:11:09.152071000> nfs start
    Not starting NFS client services - no NFS found in /etc/fstab:unused
    <notice -- Dec 27 20:11:09.212532000> 'nfs start' exits with status 6
    <notice -- Dec 27 20:11:09.214284000> smbfs start
    Mount CIFS File Systems unused
    <notice -- Dec 27 20:11:09.270080000> 'smbfs start' exits with status 6
    <notice -- Dec 27 20:11:09.272092000> kbd start
    Loading console font lat9w-16.psfu -m trivial G0:loadable
    doneLoading keymap assuming iso-8859-15 euro
    Loading /usr/share/kbd/keymaps/i386/qwerty/us.map.gz
    doneLoading compose table latin1.adddone
    Start Unicode mode
    done
    <notice -- Dec 27 20:11:10.78851000> 'kbd start' exits with status 0
    <notice -- Dec 27 20:11:10.81452000> alsasound start
    <notice -- Dec 27 20:11:10.119462000> 'alsasound start' exits with status 0
    <notice -- Dec 27 20:11:10.120953000> bluez-coldplug start
    done
    <notice -- Dec 27 20:11:10.159870000> 'bluez-coldplug start' exits with status 0
    <notice -- Dec 27 20:11:10.161649000> irq_balancer start
    Starting irqbalance
    <notice -- Dec 27 20:11:10.228044000> startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console SELINUX_INIT=YES ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
    done
    <notice -- Dec 27 20:11:10.240220000> 'irq_balancer start' exits with status 0
    <notice -- Dec 27 20:11:10.241681000> java.binfmt_misc start
    Starting java.binfmt_misc done
    <notice -- Dec 27 20:11:10.312192000>
    'java.binfmt_misc start' exits with status 0
    <notice -- Dec 27 20:11:10.314207000> mcelog start
    Starting mcelog...
    <notice -- Dec 27 20:11:10.378680000> startproc: execve (/usr/sbin/mcelog) [ /usr/sbin/mcelog --daemon --config-file /etc/mcelog/mcelog.conf ], [ CONSOLE=/dev/console SELINUX_INIT=YES ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 _=/sbin/startproc DAEMON=/usr/sbin/mcelog ]
    done
    <notice -- Dec 27 20:11:10.428551000> 'mcelog start' exits with status 0
    <notice -- Dec 27 20:11:10.429934000> network-remotefs start
    <notice -- Dec 27 20:11:10.635758000> checkproc: /sbin/udevd 442<notice -- Dec 27 20:11:10.635835000> checkproc: /sbin/udevd 532<notice -- Dec 27 20:11:10.635845000> checkproc: /sbin/udevd 533<notice -- Dec 27 20:11:10.635852000> checkproc: /sbin/udevd 2355<notice -- Dec 27 20:11:10.635859000> checkproc: /sbin/udevd 2356<notice -- Dec 27 20:11:10.635865000> checkproc: /sbin/udevd 2357<notice -- Dec 27 20:11:10.635872000> checkproc: /sbin/udevd 2359
    Setting up (remotefs) network interfaces:
    Setting up service (remotefs) network . . . . . . . . . .done
    <notice -- Dec 27 20:11:10.863775000> 'network-remotefs start' exits with status 0
    <notice -- Dec 27 20:11:10.865981000> sfcb start
    Starting sfcb:
    <notice -- Dec 27 20:11:10.936575000> startproc: execve (/usr/sbin/sfcbd) [ /usr/sbin/sfcbd -d ], [ CONSOLE=/dev/console SELINUX_INIT=YES ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LD_PRELOAD=/lib64/libpam_misc.so.0 crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 _=/sbin/startproc DAEMON=/usr/sbin/sfcbd ]
    done
    <notice -- Dec 27 20:11:11.23169000> 'sfcb start' exits with status 0
    <notice -- Dec 27 20:11:11.24855000> slpd start
    Starting slpd
    &lt

    I bet LUM is not working properly. Go to OES setup and run through the LUM settings.
    I had the same problem after a partially failed migration from OES2 to OES11. Also make sure your OESCommonProxy_servername users are correct. This got all messed up for me.
    >>> rbsa<[email protected]> 12/27/2013 5:06 AM >>>
    Hi
    I recently did an online udpate and after a few hours my groupwise
    stopped working. I checked out the issue and it seems my NSS drive
    storing my GWDATA is not mounting, I am running a hyper V environment
    and the scsi drive has enough storage.
    Server details
    LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-x86_64:core-3.2-x86_64:core-4.0-x86_64"
    Novell Open Enterprise Server 11 (x86_64)
    VERSION = 11.1
    PATCHLEVEL = 1
    SUSE Linux Enterprise Server 11 (x86_64)
    VERSION = 11
    PATCHLEVEL = 2
    Linux rem-now-01 3.0.101-0.5-default #1 SMP Thu Oct 31 05:21:34 UTC 2013
    (36fae46) x86_64 x86_64 x86_64 GNU/Linux
    I have attached the boot message for reference.
    These services have failed to load
    Master Resource Control: runlevel 5 has been reached
    Failed services in runlevel 5: novell-nss novell-xregd grpwise
    Skipped services in runlevel 5: nfs smbfs smartd
    Any ideas where to start?
    klogd 1.4.1, log source = ksyslog started.
    <6>[ 0.000000] Initializing cgroup subsys cpuset
    <6>[ 0.000000] Initializing cgroup subsys cpu
    <5>[ 0.000000] Linux version 3.0.101-0.5-default (geeko@buildhost)
    (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1
    SMP Thu Oct 31 05:21:34 UTC 2013 (36fae46)
    <6>[ 0.000000] Command line:
    root=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    resume=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
    splash=silent crashkernel=256M-:128M vga=0x31a
    <6>[ 0.000000] BIOS-provided physical RAM map:
    <6>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00
    (usable)
    <6>[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000
    (reserved)
    <6>[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000
    (reserved)
    <6>[ 0.000000] BIOS-e820: 0000000000100000 - 00000000f7ff0000
    (usable)
    <6>[ 0.000000] BIOS-e820: 00000000f7ff0000 - 00000000f7fff000 (ACPI
    data)
    <6>[ 0.000000] BIOS-e820: 00000000f7fff000 - 00000000f8000000 (ACPI
    NVS)
    <6>[ 0.000000] BIOS-e820: 0000000100000000 - 0000000208000000
    (usable)
    <6>[ 0.000000] NX (Execute Disable) protection: active
    <6>[ 0.000000] DMI 2.3 present.
    <7>[ 0.000000] DMI: Microsoft Corporation Virtual Machine/Virtual
    Machine, BIOS 090006 05/23/2012
    <6>[ 0.000000] Hypervisor detected: Microsoft HyperV
    <6>[ 0.000000] HyperV: features 0xe7f, hints 0x2c
    <7>[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
    (usable) ==> (reserved)
    <7>[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
    (usable)
    <6>[ 0.000000] No AGP bridge found
    <6>[ 0.000000] last_pfn = 0x208000 max_arch_pfn = 0x400000000
    <7>[ 0.000000] MTRR default type: uncachable
    <7>[ 0.000000] MTRR fixed ranges enabled:
    <7>[ 0.000000] 00000-9FFFF write-back
    <7>[ 0.000000] A0000-DFFFF uncachable
    <7>[ 0.000000] E0000-FFFFF write-back
    <7>[ 0.000000] MTRR variable ranges enabled:
    <7>[ 0.000000] 0 base 0000000000 mask FF00000000 write-back
    <7>[ 0.000000] 1 base 0100000000 mask F000000000 write-back
    <7>[ 0.000000] 2 disabled
    <7>[ 0.000000] 3 disabled
    <7>[ 0.000000] 4 disabled
    <7>[ 0.000000] 5 disabled
    <7>[ 0.000000] 6 disabled
    <7>[ 0.000000] 7 disabled
    <6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
    0x7010600070106
    <6>[ 0.000000] last_pfn = 0xf7ff0 max_arch_pfn = 0x400000000
    <6>[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    <7>[ 0.000000] initial memory mapped : 0 - 20000000
    <7>[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000
    size 20480
    <6>[ 0.000000] init_memory_mapping:
    0000000000000000-00000000f7ff0000
    <7>[ 0.000000] 0000000000 - 00f7e00000 page 2M
    <7>[ 0.000000] 00f7e00000 - 00f7ff0000 page 4k
    <7>[ 0.000000] kernel direct mapping tables up to 0xf7feffff @ [mem
    0x1fffa000-0x1fffffff]
    <6>[ 0.000000] init_memory_mapping:
    0000000100000000-0000000208000000
    <7>[ 0.000000] 0100000000 - 0208000000 page 2M
    <7>[ 0.000000] kernel direct mapping tables up to 0x207ffffff @ [mem
    0xf7fea000-0xf7feffff]
    <6>[ 0.000000] nmi ring buffer: 262144
    <6>[ 0.000000] RAMDISK: 37905000 - 37ff0000
    <6>[ 0.000000] Reserving 128MB of memory at 752MB for crashkernel
    (System RAM: 8320MB)
    <4>[ 0.000000] ACPI: RSDP 00000000000f56f0 00014 (v00 ACPIAM)
    <4>[ 0.000000] ACPI: RSDT 00000000f7ff0000 00040 (v01 VRTUAL MICROSFT
    05001223 MSFT 00000097)
    <4>[ 0.000000] ACPI: FACP 00000000f7ff0200 00081 (v02 VRTUAL MICROSFT
    05001223 MSFT 00000097)
    <4>[ 0.000000] ACPI: DSDT 00000000f7ff1724 02E78 (v01 MSFTVM MSFTVM02
    00000002 INTL 02002026)
    <4>[ 0.000000] ACPI: FACS 00000000f7fff000 00040
    <4>[ 0.000000] ACPI: WAET 00000000f7ff1480 00028 (v01 VRTUAL MICROSFT
    05001223 MSFT 00000097)
    <4>[ 0.000000] ACPI: SLIC 00000000f7ff14c0 00176 (v01 VRTUAL MICROSFT
    05001223 MSFT 00000097)
    <4>[ 0.000000] ACPI: OEM0 00000000f7ff16c0 00064 (v01 VRTUAL MICROSFT
    05001223 MSFT 00000097)
    <4>[ 0.000000] ACPI: SRAT 00000000f7ff0600 00100 (v02 VRTUAL MICROSFT
    00000001 MSFT 00000001)
    <4>[ 0.000000] ACPI: APIC 00000000f7ff0300 0024C (v01 VRTUAL MICROSFT
    05001223 MSFT 00000097)
    <4>[ 0.000000] ACPI: OEMB 00000000f7fff040 00064 (v01 VRTUAL MICROSFT
    05001223 MSFT 00000097)
    <7>[ 0.000000] ACPI: Local APIC address 0xfee00000
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0
    <6>[ 0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0
    <6>[ 0.000000] SRAT: Node 0 PXM 0 0-f8000000
    <6>[ 0.000000] SRAT: Node 0 PXM 0 100000000-208000000
    <6>[ 0.000000] NUMA: Node 0 [0,f8000000) + [100000000,208000000) ->
    [0,208000000)
    <6>[ 0.000000] Initmem setup node 0
    0000000000000000-0000000208000000
    <6>[ 0.000000] NODE_DATA [0000000207f99000 - 0000000207fbffff]
    <7>[ 0.000000] [ffffea0000000000-ffffea00071fffff] PMD ->
    [ffff8801ff600000-ffff8802067fffff] on node 0
    <4>[ 0.000000] Zone PFN ranges:
    <4>[ 0.000000] DMA 0x00000010 -> 0x00001000
    <4>[ 0.000000] DMA32 0x00001000 -> 0x00100000
    <4>[ 0.000000] Normal 0x00100000 -> 0x00208000
    <4>[ 0.000000] Movable zone start PFN for each node
    <4>[ 0.000000] early_node_map[3] active PFN ranges
    <4>[ 0.000000] 0: 0x00000010 -> 0x0000009f
    <4>[ 0.000000] 0: 0x00000100 -> 0x000f7ff0
    <4>[ 0.000000] 0: 0x00100000 -> 0x00208000
    <7>[ 0.000000] On node 0 totalpages: 2097023
    <7>[ 0.000000] DMA zone: 56 pages used for memmap
    <7>[ 0.000000] DMA zone: 5 pages reserved
    <7>[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
    <7>[ 0.000000] DMA32 zone: 14280 pages used for memmap
    <7>[ 0.000000] DMA32 zone: 997416 pages, LIFO batch:31
    <7>[ 0.000000] Normal zone: 14784 pages used for memmap
    <7>[ 0.000000] Normal zone: 1066560 pages, LIFO batch:31
    <6>[ 0.000000] ACPI: PM-Timer IO Port: 0x408
    <7>[ 0.000000] ACPI: Local APIC address 0xfee00000
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x10] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x11] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x12] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x13] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x14] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x15] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x16] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x17] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x18] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x19] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1a] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1b] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1c] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1d] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1e] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x1f] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0x20] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0x21] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0x22] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0x23] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0x24] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0x25] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0x26] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0x27] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0x28] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x29] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x2a] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x2b] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x2c] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x2d] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x2e] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0x2f] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0x30] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0x31] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0x32] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0x33] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0x34] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0x35] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0x36] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0x37] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0x38] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0x39] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0x3a] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0x3b] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0x3c] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0x3d] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0x3e] disabled)
    <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x40] lapic_id[0x3f] disabled)
    <6>[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000]
    gsi_base[0])
    <6>[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000,
    GSI 0-23
    <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
    dfl)
    <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
    level)
    <7>[ 0.000000] ACPI: IRQ0 used by override.
    <7>[ 0.000000] ACPI: IRQ2 used by override.
    <7>[ 0.000000] ACPI: IRQ9 used by override.
    <6>[ 0.000000] Using ACPI (MADT) for SMP configuration information
    <6>[ 0.000000] SMP: Allowing 64 CPUs, 56 hotplug CPUs
    <7>[ 0.000000] nr_irqs_gsi: 40
    <6>[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
    00000000000a0000
    <6>[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
    00000000000e0000
    <6>[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
    0000000000100000
    <6>[ 0.000000] PM: Registered nosave memory: 00000000f7ff0000 -
    00000000f7fff000
    <6>[ 0.000000] PM: Registered nosave memory: 00000000f7fff000 -
    00000000f8000000
    <6>[ 0.000000] PM: Registered nosave memory: 00000000f8000000 -
    0000000100000000
    <6>[ 0.000000] Allocating PCI resources starting at f8000000 (gap:
    f8000000:8000000)
    <6>[ 0.000000] Booting paravirtualized kernel on bare hardware
    <6>[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:64
    nr_cpu_ids:64 nr_node_ids:1
    <6>[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff880206e00000 s73728
    r8192 d20480 u131072
    <7>[ 0.000000] pcpu-alloc: s73728 r8192 d20480 u131072
    alloc=1*2097152
    <7>[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12
    13 14 15
    <7>[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28
    29 30 31
    <7>[ 0.000000] pcpu-alloc: [0] 32 33 34 35 36 37 38 39 40 41 42 43 44
    45 46 47
    <7>[ 0.000000] pcpu-alloc: [0] 48 49 50 51 52 53 54 55 56 57 58 59 60
    61 62 63
    <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
    Total pages: 2067898
    <4>[ 0.000000] Policy zone: Normal
    <5>[ 0.000000] Kernel command line:
    root=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    resume=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
    splash=silent crashkernel=256M-:128M vga=0x31a
    <6>[ 0.000000] bootsplash: silent mode.
    <6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    <6>[ 0.000000] Checking aperture...
    <6>[ 0.000000] No AGP bridge found
    <6>[ 0.000000] Memory: 8043808k/8519680k available (4433k kernel
    code, 131588k absent, 344284k reserved, 7663k data, 1336k init)
    <6>[ 0.000000] Hierarchical RCU implementation.
    <6>[ 0.000000] RCU dyntick-idle grace-period acceleration is
    enabled.
    <6>[ 0.000000] NR_IRQS:262400 nr_irqs:1192 16
    <6>[ 0.000000] Console: colour dummy device 80x25
    <6>[ 0.000000] console [tty0] enabled
    <6>[ 0.000000] allocated 67108864 bytes of page_cgroup
    <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't
    want memory cgroups
    <4>[ 0.000000] Fast TSC calibration failed
    <4>[ 0.000000] TSC: Unable to calibrate against PIT
    <6>[ 0.000000] TSC: using PMTIMER reference calibration
    <4>[ 0.000000] Detected 3324.942 MHz processor.
    <6>[ 0.012014] Calibrating delay loop (skipped), value calculated
    using timer frequency.. 6649.88 BogoMIPS (lpj=13299768)
    <6>[ 0.012022] pid_max: default: 65536 minimum: 512
    <4>[ 0.012304] kdb version 4.4 by Keith Owens, Scott Lurndal.
    Copyright SGI, All Rights Reserved
    <6>[ 0.012548] Security Framework initialized
    <6>[ 0.012570] AppArmor: AppArmor initialized
    <6>[ 0.013339] Dentry cache hash table entries: 1048576 (order: 11,
    8388608 bytes)
    <6>[ 0.017041] Inode-cache hash table entries: 524288 (order: 10,
    4194304 bytes)
    <6>[ 0.018119] Mount-cache hash table entries: 256
    <6>[ 0.018332] Initializing cgroup subsys cpuacct
    <6>[ 0.018347] Initializing cgroup subsys memory
    <6>[ 0.018376] Initializing cgroup subsys devices
    <6>[ 0.018381] Initializing cgroup subsys freezer
    <6>[ 0.018384] Initializing cgroup subsys net_cls
    <6>[ 0.018388] Initializing cgroup subsys blkio
    <6>[ 0.018396] Initializing cgroup subsys perf_event
    <6>[ 0.021490] CPU: Physical Processor ID: 0
    <6>[ 0.021495] CPU: Processor Core ID: 0
    <6>[ 0.021500] mce: CPU supports 1 MCE banks
    <6>[ 0.121088] ACPI: Core revision 20110413
    <6>[ 0.124121] Switched APIC routing to physical flat.
    <6>[ 0.204012] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    <6>[ 0.251460] CPU0: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz
    stepping 02
    <6>[ 0.252015] Performance Events: unsupported p6 CPU model 44 no PMU
    driver, software events only.
    <4>[ 0.252015] NMI watchdog disabled (cpu0): hardware events not
    enabled
    <6>[ 0.252015] Booting Node 0, Processors #1
    <7>[ 0.252015] smpboot cpu 1: start_ip = 9a000
    <4>[ 0.264045] NMI watchdog disabled (cpu1): hardware events not
    enabled
    <4>[ 0.264188] #2
    <7>[ 0.264191] smpboot cpu 2: start_ip = 9a000
    <4>[ 0.284043] NMI watchdog disabled (cpu2): hardware events not
    enabled
    <4>[ 0.284180] #3
    <7>[ 0.284183] smpboot cpu 3: start_ip = 9a000
    <4>[ 0.300049] NMI watchdog disabled (cpu3): hardware events not
    enabled
    <4>[ 0.300226] #4
    <7>[ 0.300229] smpboot cpu 4: start_ip = 9a000
    <4>[ 0.320046] NMI watchdog disabled (cpu4): hardware events not
    enabled
    <4>[ 0.320185] #5
    <7>[ 0.320188] smpboot cpu 5: start_ip = 9a000
    <4>[ 0.336048] NMI watchdog disabled (cpu5): hardware events not
    enabled
    <4>[ 0.336208] #6
    <7>[ 0.336211] smpboot cpu 6: start_ip = 9a000
    <4>[ 0.356059] NMI watchdog disabled (cpu6): hardware events not
    enabled
    <4>[ 0.356212] #7
    <7>[ 0.356215] smpboot cpu 7: start_ip = 9a000
    <4>[ 0.376049] NMI watchdog disabled (cpu7): hardware events not
    enabled
    <6>[ 0.376084] Brought up 8 CPUs
    <6>[ 0.376089] Total of 8 processors activated (53199.07 BogoMIPS).
    <6>[ 0.396382] devtmpfs: initialized
    <6>[ 0.403154] PM: Registering ACPI NVS region at f7fff000 (4096
    bytes)
    <6>[ 0.403154] print_constraints: dummy:
    <6>[ 0.403154] Time: 16:35:52 Date: 12/27/13
    <6>[ 0.404195] NET: Registered protocol family 16
    <6>[ 0.404383] ACPI: bus type pci registered
    <6>[ 0.404749] PCI: Using configuration type 1 for base access
    <6>[ 0.405534] bio: create slab <bio-0> at 0
    <7>[ 0.410275] ACPI: EC: Look up EC in DSDT
    <6>[ 0.413902] ACPI: Interpreter enabled
    <6>[ 0.413910] ACPI: (supports S0 S5)
    <6>[ 0.413929] ACPI: Using IOAPIC for interrupt routing
    <6>[ 0.426448] ACPI: No dock devices found.
    <6>[ 0.426456] PCI: Using host bridge windows from ACPI; if
    necessary, use "pci=nocrs" and report a bug
    <6>[ 0.427535] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus
    00-ff])
    <6>[ 0.429730] pci_root PNP0A03:00: host bridge window [mem
    0xfe0000000-0xfffefffff]
    <6>[ 0.429738] pci_root PNP0A03:00: host bridge window [io
    0x0000-0x0cf7]
    <6>[ 0.429743] pci_root PNP0A03:00: host bridge window [io
    0x0d00-0xffff]
    <6>[ 0.429748] pci_root PNP0A03:00: host bridge window [mem
    0x000a0000-0x000bffff]
    <6>[ 0.429754] pci_root PNP0A03:00: host bridge window [mem
    0xf8000000-0xfffbffff]
    <7>[ 0.429922] pci 0000:00:00.0: [8086:7192] type 0 class 0x000600
    <7>[ 0.431592] pci 0000:00:07.0: [8086:7110] type 0 class 0x000601
    <7>[ 0.434290] pci 0000:00:07.1: [8086:7111] type 0 class 0x000101
    <7>[ 0.436389] pci 0000:00:07.1: reg 20: [io 0xffa0-0xffaf]
    <7>[ 0.437608] pci 0000:00:07.3: [8086:7113] type 0 class 0x000680
    <4>[ 0.437647] * Found PM-Timer Bug on the chipset. Due to
    workarounds for a bug,
    <4>[ 0.437649] * this clock source is slow. Consider trying other
    clock sources
    <6>[ 0.439685] pci 0000:00:07.3: quirk: [io 0x0400-0x043f] claimed
    by PIIX4 ACPI
    <7>[ 0.440542] pci 0000:00:08.0: [1414:5353] type 0 class 0x000300
    <7>[ 0.442475] pci 0000:00:08.0: reg 10: [mem 0xf8000000-0xfbffffff]
    <7>[ 0.445307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    <6>[ 0.445568] pci0000:00: Unable to request _OSC control (_OSC
    support mask: 0x1e)
    <6>[ 0.446013] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11
    12 14 15)
    <6>[ 0.446236] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11
    12 14 15) *0, disabled.
    <6>[ 0.446462] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11
    12 14 15) *0, disabled.
    <6>[ 0.446686] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11
    12 14 15) *0, disabled.
    <6>[ 0.446918] vgaarb: device added:
    PCI:0000:00:08.0,decodes=io+mem,owns=io+mem,locks= none
    <6>[ 0.446926] vgaarb: loaded
    <6>[ 0.447035] PCI: Using ACPI for IRQ routing
    <7>[ 0.447035] PCI: pci_cache_line_size set to 64 bytes
    <7>[ 0.447035] reserve RAM buffer: 000000000009fc00 -
    000000000009ffff
    <7>[ 0.447035] reserve RAM buffer: 00000000f7ff0000 -
    00000000f7ffffff
    <6>[ 0.447035] NetLabel: Initializing
    <6>[ 0.447035] NetLabel: domain hash size = 128
    <6>[ 0.447035] NetLabel: protocols = UNLABELED CIPSOv4
    <6>[ 0.447035] NetLabel: unlabeled traffic allowed by default
    <6>[ 0.447035] Switching to clocksource hyperv_clocksource
    <6>[ 0.447035] AppArmor: AppArmor Filesystem Enabled
    <6>[ 0.447035] pnp: PnP ACPI init
    <6>[ 0.447035] ACPI: bus type pnp registered
    <7>[ 0.447832] pnp 00:00: [mem 0xfe0000000-0xfffefffff window]
    <7>[ 0.447836] pnp 00:00: [bus 00-ff]
    <7>[ 0.447838] pnp 00:00: [io 0x0cf8-0x0cff]
    <7>[ 0.447841] pnp 00:00: [io 0x0000-0x0cf7 window]
    <7>[ 0.447844] pnp 00:00: [io 0x0d00-0xffff window]
    <7>[ 0.447847] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    <7>[ 0.447849] pnp 00:00: [mem 0x00000000 window]
    <7>[ 0.447852] pnp 00:00: [mem 0xf8000000-0xfffbffff window]
    <7>[ 0.447893] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03
    (active)
    <7>[ 0.447932] pnp 00:01: [dma 4]
    <7>[ 0.447934] pnp 00:01: [io 0x0000-0x000f]
    <7>[ 0.447937] pnp 00:01: [io 0x0081-0x0083]
    <7>[ 0.447939] pnp 00:01: [io 0x0087]
    <7>[ 0.447941] pnp 00:01: [io 0x0089-0x008b]
    <7>[ 0.447944] pnp 00:01: [io 0x008f]
    <7>[ 0.447946] pnp 00:01: [io 0x00c0-0x00df]
    <7>[ 0.447974] pnp 00:01: Plug and Play ACPI device, IDs PNP0200
    (active)
    <7>[ 0.447990] pnp 00:02: [io 0x0070-0x0071]
    <7>[ 0.452329] pnp 00:02: [irq 8]
    <7>[ 0.452369] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00
    (active)
    <7>[ 0.452425] pnp 00:03: [io 0x0060]
    <7>[ 0.452428] pnp 00:03: [io 0x0064]
    <7>[ 0.455932] pnp 00:03: [irq 1]
    <7>[ 0.455975] pnp 00:03: Plug and Play ACPI device, IDs PNP0303
    PNP030b (active)
    <7>[ 0.458641] pnp 00:04: [irq 12]
    <7>[ 0.458684] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03
    PNP0f13 (active)
    <7>[ 0.458703] pnp 00:05: [io 0x0061]
    <7>[ 0.458735] pnp 00:05: Plug and Play ACPI device, IDs PNP0800
    (active)
    <7>[ 0.458749] pnp 00:06: [io 0x00f0-0x00ff]
    <7>[ 0.461312] pnp 00:06: [irq 13]
    <7>[ 0.461353] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04
    (active)
    <7>[ 0.463988] pnp 00:07: [irq 4]
    <7>[ 0.463992] pnp 00:07: [dma 0 disabled]
    <7>[ 0.463995] pnp 00:07: [io 0x03f8-0x03ff]
    <7>[ 0.464054] pnp 00:07: Plug and Play ACPI device, IDs PNP0501
    (active)
    <7>[ 0.466278] pnp 00:08: [irq 3]
    <7>[ 0.466282] pnp 00:08: [dma 0 disabled]
    <7>[ 0.466284] pnp 00:08: [io 0x02f8-0x02ff]
    <7>[ 0.466344] pnp 00:08: Plug and Play ACPI device, IDs PNP0501
    (active)
    <7>[ 0.468615] pnp 00:09: [irq 6]
    <7>[ 0.468618] pnp 00:09: [dma 2]
    <7>[ 0.468621] pnp 00:09: [io 0x03f0-0x03f5]
    <7>[ 0.468623] pnp 00:09: [io 0x03f7]
    <7>[ 0.468696] pnp 00:09: Plug and Play ACPI device, IDs PNP0700
    (active)
    <7>[ 0.468714] pnp 00:0a: [io 0x0010-0x001f]
    <7>[ 0.468717] pnp 00:0a: [io 0x0022-0x003f]
    <7>[ 0.468719] pnp 00:0a: [io 0x0044-0x005f]
    <7>[ 0.468721] pnp 00:0a: [io 0x0062-0x0063]
    <7>[ 0.468723] pnp 00:0a: [io 0x0065-0x006f]
    <7>[ 0.468725] pnp 00:0a: [io 0x0072-0x007f]
    <7>[ 0.468728] pnp 00:0a: [io 0x0080]
    <7>[ 0.468732] pnp 00:0a: [io 0x0084-0x0086]
    <7>[ 0.468734] pnp 00:0a: [io 0x0088]
    <7>[ 0.468736] pnp 00:0a: [io 0x008c-0x008e]
    <7>[ 0.468738] pnp 00:0a: [io 0x0090-0x009f]
    <7>[ 0.468741] pnp 00:0a: [io 0x00a2-0x00bf]
    <7>[ 0.468743] pnp 00:0a: [io 0x00e0-0x00ef]
    <7>[ 0.468745] pnp 00:0a: [io 0x01e0-0x01ef]
    <7>[ 0.468747] pnp 00:0a: [io 0x0160-0x016f]
    <7>[ 0.468749] pnp 00:0a: [io 0x0278-0x027f]
    <7>[ 0.468752] pnp 00:0a: [io 0x0378-0x037f]
    <7>[ 0.468754] pnp 00:0a: [io 0x0678-0x067f]
    <7>[ 0.468756] pnp 00:0a: [io 0x0778-0x077f]
    <7>[ 0.468758] pnp 00:0a: [io 0x04d0-0x04d1]
    <6>[ 0.468806] system 00:0a: [io 0x01e0-0x01ef] has been reserved
    <6>[ 0.468814] system 00:0a: [io 0x0160-0x016f] has been reserved
    <6>[ 0.468819] system 00:0a: [io 0x0278-0x027f] has been reserved
    <6>[ 0.468824] system 00:0a: [io 0x0378-0x037f] has been reserved
    <6>[ 0.468829] system 00:0a: [io 0x0678-0x067f] has been reserved
    <6>[ 0.468834] system 00:0a: [io 0x0778-0x077f] has been reserved
    <6>[ 0.468839] system 00:0a: [io 0x04d0-0x04d1] has been reserved
    <7>[ 0.468844] system 00:0a: Plug and Play ACPI device, IDs PNP0c02
    (active)
    <7>[ 0.469099] pnp 00:0b: [io 0x0400-0x043f]
    <7>[ 0.469102] pnp 00:0b: [io 0x0370-0x0371]
    <7>[ 0.469105] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
    <7>[ 0.469107] pnp 00:0b: [io 0x0440-0x044f]
    <7>[ 0.469110] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
    <7>[ 0.469112] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
    <6>[ 0.469153] system 00:0b: [io 0x0400-0x043f] has been reserved
    <6>[ 0.469159] system 00:0b: [io 0x0370-0x0371] has been reserved
    <6>[ 0.469164] system 00:0b: [io 0x0440-0x044f] has been reserved
    <6>[ 0.469169] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be
    reserved
    <6>[ 0.469175] system 00:0b: [mem 0xfee00000-0xfee00fff] has been
    reserved
    <7>[ 0.469180] system 00:0b: Plug and Play ACPI device, IDs PNP0c02
    (active)
    <7>[ 0.469364] pnp 00:0c: [mem 0x00000000-0x0009ffff]
    <7>[ 0.469367] pnp 00:0c: [mem 0x000c0000-0x000dffff]
    <7>[ 0.469370] pnp 00:0c: [mem 0x000e0000-0x000fffff]
    <7>[ 0.469372] pnp 00:0c: [mem 0x00100000-0xf7ffffff]
    <7>[ 0.469374] pnp 00:0c: [mem 0xfffc0000-0xffffffff]
    <6>[ 0.469417] system 00:0c: [mem 0x00000000-0x0009ffff] could not be
    reserved
    <6>[ 0.469423] system 00:0c: [mem 0x000c0000-0x000dffff] could not be
    reserved
    <6>[ 0.469429] system 00:0c: [mem 0x000e0000-0x000fffff] could not be
    reserved
    <6>[ 0.469434] system 00:0c: [mem 0x00100000-0xf7ffffff] could not be
    reserved
    <6>[ 0.469439] system 00:0c: [mem 0xfffc0000-0xffffffff] has been
    reserved
    <7>[ 0.469445] system 00:0c: Plug and Play ACPI device, IDs PNP0c01
    (active)
    <6>[ 0.469782] pnp: PnP ACPI: found 13 devices
    <6>[ 0.469787] ACPI: ACPI bus type pnp unregistered
    <7>[ 0.476082] PCI: max bus depth: 0 pci_try_num: 1
    <7>[ 0.476089] pci_bus 0000:00: resource 4 [mem
    0xfe0000000-0xfffefffff]
    <7>[ 0.476092] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7]
    <7>[ 0.476094] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
    <7>[ 0.476097] pci_bus 0000:00: resource 7 [mem
    0x000a0000-0x000bffff]
    <7>[ 0.476100] pci_bus 0000:00: resource 8 [mem
    0xf8000000-0xfffbffff]
    <6>[ 0.477048] NET: Registered protocol family 2
    <6>[ 0.477558] IP route cache hash table entries: 262144 (order: 9,
    2097152 bytes)
    <6>[ 0.479416] TCP established hash table entries: 524288 (order: 11,
    8388608 bytes)
    <6>[ 0.481075] TCP bind hash table entries: 65536 (order: 8, 1048576
    bytes)
    <6>[ 0.481261] TCP: Hash tables configured (established 524288 bind
    65536)
    <6>[ 0.481266] TCP reno registered
    <6>[ 0.481283] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    <6>[ 0.481335] UDP-Lite hash table entries: 4096 (order: 5, 131072
    bytes)
    <6>[ 0.482109] NET: Registered protocol family 1
    <6>[ 0.482125] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    <7>[ 0.482366] pci 0000:00:08.0: Boot video device
    <7>[ 0.482406] PCI: CLS 0 bytes, default 64
    <6>[ 0.482455] Unpacking initramfs...
    <6>[ 0.659642] Freeing initrd memory: 7084k freed
    <6>[ 0.661052] PCI-DMA: Using software bounce buffering for IO
    (SWIOTLB)
    <6>[ 0.661059] Placing 64MB software IO TLB between ffff8800f3fea000
    - ffff8800f7fea000
    <6>[ 0.661064] software IO TLB at phys 0xf3fea000 - 0xf7fea000
    <6>[ 0.668188] audit: initializing netlink socket (disabled)
    <5>[ 0.668208] type=2000 audit(1388162152.664:1): initialized
    <4>[ 0.702880] bounce pool size: 64 pages
    <6>[ 0.702891] HugeTLB registered 2 MB page size, pre-allocated 0
    pages
    <5>[ 0.706769] VFS: Disk quotas dquot_6.5.2
    <4>[ 0.706943] Dquot-cache hash table entries: 512 (order 0, 4096
    bytes)
    <6>[ 0.707274] msgmni has been set to 3931
    <6>[ 0.707604] alg: No test for stdrng (krng)
    <6>[ 0.707718] Block layer SCSI generic (bsg) driver version 0.4
    loaded (major 253)
    <6>[ 0.707801] io scheduler noop registered
    <6>[ 0.707806] io scheduler deadline registered
    <6>[ 0.708005] io scheduler cfq registered (default)
    <6>[ 0.708249] vesafb: mode is 1280x1024x16, linelength=2560,
    pages=0
    <6>[ 0.708254] vesafb: scrolling: redraw
    <6>[ 0.708258] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    <6>[ 0.708929] vesafb: framebuffer at 0xf8000000, mapped to
    0xffffc90001800000, using 4096k, total 4096k
    <6>[ 0.709049] bootsplash 3.2.0-2010/03/31: looking for picture...
    <6>[ 0.709052] bootsplash: silentjpeg size 74123 bytes
    <6>[ 0.731946] bootsplash: ...found (1280x1024, 40629 bytes, v3).
    <6>[ 0.780927] Console: switching to colour frame buffer device
    156x60
    <6>[ 0.828743] fb0: VESA VGA frame buffer device
    <6>[ 0.828882] Serial: 8250/16550 driver, 8 ports, IRQ sharing
    disabled
    <6>[ 0.831332] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    <6>[ 0.846410] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    <6>[ 0.933902] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    <6>[ 0.945594] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    <6>[ 0.955274] Non-volatile memory driver v1.3
    <6>[ 0.955280] Linux agpgart interface v0.103
    <6>[ 0.955379] Fixed MDIO Bus: probed
    <6>[ 0.955441] i8042: PNP: PS/2 Controller
    [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    <6>[ 0.969808] serio: i8042 KBD port at 0x60,0x64 irq 1
    <6>[ 0.969825] serio: i8042 AUX port at 0x60,0x64 irq 12
    <6>[ 0.969915] mousedev: PS/2 mouse device common for all mice
    <6>[ 0.970155] cpuidle: using governor ladder
    <6>[ 0.970161] cpuidle: using governor menu
    <6>[ 0.970165] EFI Variables Facility v0.08 2004-May-17
    <6>[ 0.970592] TCP cubic registered
    <5>[ 0.970609] Registering the dns_resolver key type
    <7>[ 0.970721] PM: Checking hibernation image partition
    /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
    <6>[ 1.008486] input: AT Translated Set 2 keyboard as
    /devices/platform/i8042/serio0/input/input0
    <4>[ 1.216294] trackpoint.c: failed to get extended button data
    <6>[ 1.695523] Refined TSC clocksource calibration: 3324.999 MHz.
    <6>[ 4.400574] IBM TrackPoint firmware: 0x01, buttons: 0/0
    <6>[ 4.402228] input: TPPS/2 IBM TrackPoint as
    /devices/platform/i8042/serio1/input/input1
    <7>[ 4.402999] PM: Hibernation image not present or could not be
    loaded.
    <6>[ 4.403017] registered taskstats version 1
    <6>[ 4.404389] Magic number: 9:792:591
    <6>[ 4.409458] Freeing unused kernel memory: 1336k freed
    <6>[ 4.409736] Write protecting the kernel read-only data: 10240k
    <6>[ 4.417078] Freeing unused kernel memory: 1692k freed
    <6>[ 4.421718] Freeing unused kernel memory: 1000k freed
    <5>[ 4.495042] SCSI subsystem initialized
    <7>[ 4.497920] libata version 3.00 loaded.
    <7>[ 4.504287] ata_piix 0000:00:07.1: version 2.13
    <6>[ 4.504462] ata_piix 0000:00:07.1: Hyper-V Virtual Machine
    detected, ATA device ignore set
    <7>[ 4.504682] ata_piix 0000:00:07.1: setting latency timer to 64
    <6>[ 4.508495] scsi0 : ata_piix
    <6>[ 4.509022] scsi1 : ata_piix
    <6>[ 4.510514] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma
    0xffa0 irq 14
    <6>[ 4.510655] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma
    0xffa8 irq 15
    <6>[ 4.677885] ata2.00: ATAPI: Virtual CD, , max MWDMA2
    <7>[ 4.678807] ata1.00: host indicates ignore ATA devices, ignored
    <6>[ 4.678980] ata1.01: ATAPI: Virtual CD, , max MWDMA2
    <6>[ 4.681960] ata2.00: configured for MWDMA2
    <6>[ 4.683187] ata1.01: configured for MWDMA2
    <5>[ 4.687680] scsi 0:0:1:0: CD-ROM Msft Virtual
    CD/ROM 1.0 PQ: 0 ANSI: 5
    <5>[ 4.689758] scsi 1:0:0:0: CD-ROM Msft Virtual
    CD/ROM 1.0 PQ: 0 ANSI: 5
    <6>[ 4.708425] hv_vmbus: Hyper-V Host OS Build:9200-6.2-16-0.16729
    <6>[ 4.712400] hv_vmbus: Negotiated host information 13
    <6>[ 4.712845] hv_vmbus: child device vmbus_0_1 registered
    <6>[ 4.713110] hv_vmbus: child device vmbus_0_2 registered
    <6>[ 4.713394] hv_vmbus: child device vmbus_0_3 registered
    <6>[ 4.713669] hv_vmbus: child device vmbus_0_4 registered
    <6>[ 4.713974] hv_vmbus: child device vmbus_0_5 registered
    <6>[ 4.714247] hv_vmbus: child device vmbus_0_6 registered
    <6>[ 4.714521] hv_vmbus: child device vmbus_0_7 registered
    <6>[ 4.714799] hv_vmbus: child device vmbus_0_8 registered
    <6>[ 4.715094] hv_vmbus: child device vmbus_0_9 registered
    <6>[ 4.715367] hv_vmbus: child device vmbus_0_10 registered
    <6>[ 4.715643] hv_vmbus: child device vmbus_0_11 registered
    <6>[ 4.715912] hv_vmbus: child device vmbus_0_12 registered
    <6>[ 9.693609] hv_vmbus: registering driver hv_storvsc
    <6>[ 9.694468] scsi2 : storvsc_host_t
    <5>[ 9.695151] scsi 2:0:0:0: Direct-Access Msft Virtual Disk
    1.0 PQ: 0 ANSI: 4
    <6>[ 9.695843] scsi3 : storvsc_host_t
    <6>[ 9.696625] scsi scan: INQUIRY result too short (5), using 36
    <5>[ 9.697436] scsi 3:0:0:1: Direct-Access Msft Virtual Disk
    1.0 PQ: 0 ANSI: 4
    <6>[ 9.698016] scsi scan: INQUIRY result too short (5), using 36
    <6>[ 14.687376] hp_sw: device handler registered
    <6>[ 14.695768] rdac: device handler registered
    <6>[ 14.703207] alua: device handler registered
    <6>[ 14.711258] emc: device handler registered
    <6>[ 14.716329] udev: starting version 147
    <7>[ 14.744338] ACPI: acpi_idle registered with cpuidle
    <6>[ 14.749183] hv_vmbus: registering driver hv_netvsc
    <6>[ 14.750531] hv_netvsc: hv_netvsc channel opened successfully
    <5>[ 14.754431] sd 2:0:0:0: [sda] 83886080 512-byte logical blocks:
    (42.9 GB/40.0 GiB)
    <5>[ 14.754627] sd 3:0:0:1: [sdb] 1048576000 512-byte logical blocks:
    (536 GB/500 GiB)
    <5>[ 14.754770] sd 2:0:0:0: [sda] Write Protect is off
    <7>[ 14.754920] sd 2:0:0:0: [sda] Mode Sense: 0f 00 00 00
    <5>[ 14.754929] sd 3:0:0:1: [sdb] Write Protect is off
    <7>[ 14.755076] sd 3:0:0:1: [sdb] Mode Sense: 0f 00 00 00
    <5>[ 14.755136] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
    enabled, doesn't support DPO or FUA
    <5>[ 14.755365] sd 3:0:0:1: [sdb] Write cache: enabled, read cache:
    enabled, doesn't support DPO or FUA
    <6>[ 14.756100] sdb: sdb1
    <5>[ 14.756539] sd 3:0:0:1: [sdb] Attached SCSI disk
    <6>[ 14.760677] sda: sda1 sda2
    <5>[ 14.761170] sd 2:0:0:0: [sda] Attached SCSI disk
    <6>[ 14.853739] hv_netvsc vmbus_0_11: Device MAC 00:15:5d:06:83:03
    link state up
    <7>[ 19.909479] PM: Marking nosave pages: 000000000009f000 -
    0000000000100000
    <7>[ 19.909485] PM: Marking nosave pages: 00000000f7ff0000 -
    0000000100000000
    <7>[ 19.909724] PM: Basic memory bitmaps created
    <7>[ 19.948242] PM: Basic memory bitmaps freed
    <6>[ 19.959506] PM: Starting manual resume from disk
    <7>[ 19.959648] PM: Hibernation image partition 8:1 present
    <7>[ 19.959650] PM: Looking for hibernation image.
    <7>[ 19.961619] PM: Image not found (code -22)
    <7>[ 19.961622] PM: Hibernation image not present or could not be
    loaded.
    <6>[ 20.136385] kjournald starting. Commit interval 15 seconds
    <6>[ 20.136764] EXT3-fs (sda2): using internal journal
    <6>[ 20.136899] EXT3-fs (sda2): mounted filesystem with ordered data
    mode
    <6>[ 21.569339] udev: starting version 147
    <4>[ 21.628664] sr0: scsi3-mmc drive: 0x/0x tray
    <6>[ 21.628807] cdrom: Uniform CD-ROM driver Revision: 3.20
    <7>[ 21.629053] sr 0:0:1:0: Attached scsi CD-ROM sr0
    <4>[ 21.632902] sr1: scsi3-mmc drive: 0x/0x tray
    <7>[ 21.633138] sr 1:0:0:0: Attached scsi CD-ROM sr1
    <5>[ 21.670559] sr 0:0:1:0: Attached scsi generic sg0 type 5
    <5>[ 21.670736] sr 1:0:0:0: Attached scsi generic sg1 type 5
    <5>[ 21.670913] sd 2:0:0:0: Attached scsi generic sg2 type 0
    <5>[ 21.671088] sd 3:0:0:1: Attached scsi generic sg3 type 0
    <6>[ 21.694963] input: PC Speaker as
    /devices/platform/pcspkr/input/input2
    <6>[ 21.738202] input: Power Button as
    /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    <6>[ 21.738681] ACPI: Power Button [PWRF]
    <6>[ 21.739750] hv_utils: Registering HyperV Utility Driver
    <6>[ 21.739888] hv_vmbus: registering driver hv_util
    <6>[ 21.741454] hv_vmbus: child device vmbus_0_5 unregistered
    <3>[ 21.855470] piix4_smbus 0000:00:07.3: SMBus base address
    uninitialized - upgrade BIOS or use force_addr=0xaddr
    <6>[ 21.863250] Floppy drive(s): fd0 is 1.44M
    <6>[ 21.890107] FDC 0 is an 82078.
    <6>[ 21.937189] rtc_cmos 00:02: RTC can wake from S4
    <6>[ 21.958729] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    <6>[ 21.964296] rtc0: alarms up to one month, 114 bytes nvram
    <6>[ 22.068854] hv_vmbus: registering driver hid_hyperv
    <6>[ 22.070603] input: Microsoft Vmbus HID-compliant Mouse as
    /devices/virtual/input/input4
    <6>[ 22.070814] hid 0006:045E:0621.0001: input: <UNKNOWN> HID v0.01
    Mouse [Microsoft Vmbus HID-compliant Mouse] on
    <6>[ 27.106125] Adding 2103292k swap on /dev/sda1. Priority:-1
    extents:1 across:2103292k
    <6>[ 28.737563] device-mapper: uevent: version 1.0.3
    <6>[ 28.738201] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
    initialised: [email protected]
    <6>[ 29.026019] loop: module loaded
    <6>[ 30.169641] fuse init (API version 7.16)
    Kernel logging (ksyslog) stopped.
    Kernel log daemon terminating.
    Boot logging started on /dev/tty1(/dev/console) at Sat Dec 28 03:36:11
    2013
    Trying manual resume from
    /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
    Invoking userspace resume from
    /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
    resume: libgcrypt version: 1.5.0
    Trying manual resume from
    /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
    Invoking in-kernel resume from
    /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
    Waiting for device
    /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    to appear: ok
    fsck from util-linux 2.19.1
    [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda2
    /dev/sda2: clean, 296531/2490368 files, 1999842/9959680 blocks
    fsck succeeded. Mounting root device read-write.
    Mounting root
    /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    mount -o rw,acl,user_xattr -t ext3
    /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    /root
    Boot logging started on /dev/tty1(/dev/console) at Sat Dec 28 03:36:13
    2013
    <notice -- Dec 28 03:36:13.332905000>
    boot.debugfs start
    Mounting debugfs at /sys/kernel/debugdone
    <notice -- Dec 28 03:36:13.369284000>
    'boot.debugfs start' exits with status 0
    <notice -- Dec 28 03:36:13.371108000>
    boot.udev start
    Starting udevd: done
    Loading drivers, configuring devices: done
    <notice -- Dec 27 20:10:55.354414000>
    'boot.udev start' exits with status 0
    <notice -- Dec 27 20:10:55.355966000>
    boot.rootfsck start
    Activating swap-devices in /etc/fstab...
    done
    <notice -- Dec 27 20:10:55.398783000>
    'boot.rootfsck start' exits with status 0
    <notice -- Dec 27 20:10:55.400577000>
    boot.clock start
    Set System Time to the current Hardware Clockdone
    <notice -- Dec 27 20:10:56.942379000>
    'boot.clock start' exits with status 0
    <notice -- Dec 27 20:10:56.944352000>
    boot.device-mapper start
    Activating device mapper...
    done
    <notice -- Dec 27 20:10:57.20179000>
    'boot.device-mapper start' exits with status 0
    <notice -- Dec 27 20:10:57.22434000>
    boot.loadmodules start
    Loading required kernel modules
    done
    <notice -- Dec 27 20:10:57.46596000>
    'boot.loadmodules start' exits with status 0
    <notice -- Dec 27 20:10:57.48288000>
    boot.md start
    Starting MD RAID unused
    <notice -- Dec 27 20:10:57.112371000>
    'boot.md start' exits with status 6
    <notice -- Dec 27 20:10:57.114441000>
    boot.localfs start
    Checking file systems...
    fsck from util-linux 2.19.1
    doneMounting local file systems...
    proc on /proc type proc (rw)
    sysfs on /sys type sysfs (rw)
    debugfs on /sys/kernel/debug type debugfs (rw)
    udev on /dev type tmpfs (rw,mode=0755)
    tmpfs on /dev/shm type tmpfs (rw,mode=1777)
    devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
    nothing was mounted
    done
    <notice -- Dec 27 20:10:57.331387000>
    'boot.localfs start' exits with status 0
    <notice -- Dec 27 20:10:57.332580000>
    boot.compliance start
    Check if the profiles matches the systemdone
    <notice -- Dec 27 20:10:58.355993000>
    'boot.compliance start' exits with status 0
    <notice -- Dec 27 20:10:58.357530000>
    boot.cycle start
    <notice -- Dec 27 20:10:58.399207000>
    'boot.cycle start' exits with status 6
    <notice -- Dec 27 20:10:58.401339000>
    boot.fuse start
    Loading fuse module done
    Mounting fuse control filesystemdone
    <notice -- Dec 27 20:10:58.458495000>
    'boot.fuse start' exits with status 0
    <notice -- Dec 27 20:10:58.460101000>
    boot.klog start
    Creating /var/log/boot.msg
    done
    <notice -- Dec 27 20:10:58.549404000>
    pidofproc: /sbin/blogd
    407
    <notice -- Dec 27 20:10:58.571980000>
    killproc: kill(407,29)
    <notice -- Dec 27 20:10:58.579244000> 'boot.klog start' exits with
    status 0
    <notice -- Dec 27 20:10:58.581541000> boot.lvm_monitor start
    Enabling monitoring on LVM volume groups...
    No volume groups found
    done
    <notice -- Dec 27 20:10:58.735165000> 'boot.lvm_monitor start' exits
    with status 0
    <notice -- Dec 27 20:10:58.736906000> boot.proc start
    <notice -- Dec 27 20:10:58.773908000> 'boot.proc start' exits with
    status 0
    <notice -- Dec 27 20:10:58.775634000> boot.scpm start
    <notice -- Dec 27 20:10:58.817985000> 'boot.scpm start' exits with
    status 0
    <notice -- Dec 27 20:10:58.819520000> boot.swap start
    Activating remaining swap-devices in /etc/fstab...
    done
    <notice -- Dec 27 20:10:58.890568000>
    'boot.swap start' exits with status 0
    <notice -- Dec 27 20:10:58.892520000> boot.udev_retry start
    <notice -- Dec 27 20:10:58.931843000>
    'boot.udev_retry start' exits with status 0
    <notice -- Dec 27 20:10:58.933759000> boot.ldconfig start
    <notice -- Dec 27 20:10:59.80965000> 'boot.ldconfig start' exits with
    status 0
    <notice -- Dec 27 20:10:59.83077000> boot.quota start
    Turning quota on
    Checking quotas. This may take some time.
    done
    <notice -- Dec 27 20:10:59.144356000> 'boot.quota start' exits with
    status 0
    <notice -- Dec 27 20:10:59.146277000> boot.sysctl start
    Setting current sysctl status from /etc/sysctl.confdone
    <notice -- Dec 27 20:10:59.201868000> 'boot.sysctl start' exits with
    status 0
    <notice -- Dec 27 20:10:59.203812000> boot.cleanup start
    <notice -- Dec 27 20:11:00.59571000> pidofproc: /sbin/blogd 407
    <notice -- Dec 27 20:11:00.344682000>
    'boot.cleanup start' exits with status 0
    <notice -- Dec 27 20:11:00.346899000> boot.ipconfig start
    Enabling syn flood protectiondone
    Disabling IP forwardingdone
    done
    <notice -- Dec 27 20:11:00.396956000> 'boot.ipconfig start' exits with
    status 0
    <notice -- Dec 27 20:11:00.398786000> boot.apparmor start
    Starting AppArmor Mounting securityfs on /sys/kernel/security done
    done
    <notice -- Dec 27 20:11:01.800318000> 'boot.apparmor start' exits with
    status 0
    <notice -- Dec 27 20:11:01.802316000> boot.localnet start
    Setting up hostname 'rem-now-01'done
    Setting up loopback interface lo
    lo IP address: 127.0.0.1/8
    IP address: 127.0.0.2/8
    done
    <notice -- Dec 27 20:11:02.188822000>
    'boot.localnet start' exits with status 0
    <notice -- Dec 27 20:11:02.190205000> boot.kdump start
    Loading kdump
    done
    <notice -- Dec 27 20:11:02.907821000> 'boot.kdump start' exits with
    status 0
    System Boot Control: The system has been set up
    Skipped features: boot.md boot.cycle
    System Boot Control: Running /etc/init.d/boot.local
    done
    INIT: Entering runlevel: 5
    Master Resource Control: previous runlevel: N, switching to runlevel: 5
    <notice -- Dec 27 20:11:03.110539000> acpid start
    Starting acpid
    <notice -- Dec 27 20:11:03.153151000> startproc: execve (/sbin/acpid) [
    /sbin/acpid ], [ CONSOLE=/dev/console SELINUX_INIT=YES
    ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0
    crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
    REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin
    vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/
    SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
    PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes
    ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    _=/sbin/startproc DAEMON=/sbin/acpid ]
    acpid: starting up
    done
    <notice -- Dec 27 20:11:03.166295000> 'acpid start' exits with status 0
    <notice -- Dec 27 20:11:03.168126000>
    dbus start
    acpid: 2 rules loaded
    Starting D-Bus daemondone
    <notice -- Dec 27 20:11:03.428391000> 'dbus start' exits with status 0
    <notice -- Dec 27 20:11:03.430244000> earlysyslog start
    Starting syslog services
    <notice -- Dec 27 20:11:03.492560000>
    startproc: execve (/sbin/syslog-ng) [
    /sbin/syslog-ng
    SELINUX_INIT=YES
    CONSOLE=/dev/console
    ROOTFS_FSTYPE=ext3
    TERM=linux
    SHELL=/bin/sh
    ROOTFS_FSCK=0
    crashkernel=256M-:128M
    LC_ALL=POSIX
    INIT_VERSION=sysvinit-2.86
    REDIRECT=/dev/tty1
    COLUMNS=156
    PATH=/bin:/sbin:/usr/bin:/usr/sbin
    DO_CONFIRM=
    vga=0x31a
    RUNLEVEL=5
    SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
    PWD=/
    PREVLEVEL=N
    LINES=60
    SHLVL=2
    HOME=/
    SPLASH=yes
    splash=silent
    ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    _=/sbin/startproc
    DAEMON=/sbin/syslog-ng
    <notice -- Dec 27 20:11:03.559776000> startproc: execve (/sbin/klogd) [
    /sbin/klogd -c 1 -x ], [ SELINUX_INIT=YES CONSOLE=/dev/console
    ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0
    crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
    REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin
    DO_CONFIRM= vga=0x31a RUNLEVEL=5
    SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
    PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent
    ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    _=/sbin/startproc DAEMON=/sbin/klogd ]
    done
    <notice -- Dec 27 20:11:03.570513000> 'earlysyslog start' exits with
    status 0
    <notice -- Dec 27 20:11:03.572386000>
    fbset start
    <notice -- Dec 27 20:11:03.604926000> 'fbset start' exits with status 0
    <notice -- Dec 27 20:11:03.606796000> micasad start
    Starting miCASA daemondone
    <notice -- Dec 27 20:11:05.737324000> 'micasad start' exits with status
    0
    <notice -- Dec 27 20:11:05.739136000> microcode.ctl start
    Checking CPU.. upload Intel microcodedone
    <notice -- Dec 27 20:11:05.995091000>
    'microcode.ctl start' exits with status 0
    <notice -- Dec 27 20:11:05.996419000> purge-kernels start
    <notice -- Dec 27 20:11:06.24241000> 'purge-kernels start' exits with
    status 0
    <notice -- Dec 27 20:11:06.25539000> random start
    Initializing random number generatordone
    <notice -- Dec 27 20:11:06.81102000> 'random start' exits with status 0
    <notice -- Dec 27 20:11:06.82673000> haldaemon start
    Loading CPUFreq modules (CPUFreq not supported)
    Starting HAL daemondone
    <notice -- Dec 27 20:11:07.19742000> 'haldaemon start' exits with status
    0
    <notice -- Dec 27 20:11:07.21771000> network start
    <notice -- Dec 27 20:11:07.219643000> checkproc: /sbin/udevd 442<notice
    -- Dec 27 20:11:07.219718000> checkproc: /sbin/udevd 532<notice -- Dec
    27 20:11:07.219728000> checkproc: /sbin/udevd 533<notice -- Dec 27
    20:11:07.219735000> checkproc: /sbin/udevd 1409<notice -- Dec 27
    20:11:07.219742000> checkproc: /sbin/udevd 1415<notice -- Dec 27
    20:11:07.219749000> checkproc: /sbin/udevd 1416<notice -- Dec 27
    20:11:07.219755000> checkproc: /sbin/udevd 1426<notice -- Dec 27
    20:11:07.219762000> checkproc: /sbin/udevd 1427<notice -- Dec 27
    20:11:07.219768000> checkproc: /sbin/udevd
    1439<notice -- Dec 27 20:11:07.219774000> checkproc: /sbin/udevd
    1440<notice -- Dec 27 20:11:07.219781000> checkproc: /sbin/udevd
    1450<notice -- Dec 27 20:11:07.219787000> checkproc: /sbin/udevd
    1453<notice -- Dec 27 20:11:07.219793000> checkproc: /sbin/udevd
    1465<notice -- Dec 27 20:11:07.219800000> checkproc: /sbin/udevd
    1466<notice -- Dec 27 20:11:07.219806000> checkproc: /sbin/udevd
    1479<notice -- Dec 27 20:11:07.219812000> checkproc: /sbin/udevd
    1480<notice -- Dec 27 20:11:07.219819000> checkproc: /sbin/udevd
    1492<notice -- Dec 27 20:11:07.219825000> checkproc: /sbin/udevd
    1493<notice -- Dec 27 20:11:07.219831000> checkproc: /sbin/udevd 1504
    Setting up (localfs) network interfaces:
    lo
    lo IP address: 127.0.0.1/8
    IP address: 127.0.0.2/8
    done eth0 name: Virtual Ethernet Card 0
    eth0 IP address: 192.168.0.10/24
    doneSetting up service (localfs) network . . . . . . . . .
    .done
    <notice -- Dec 27 20:11:08.220701000> 'network start' exits with status
    0
    <notice -- Dec 27 20:11:08.222521000>
    novell-httpstkd start
    Starting the Novell Small Http Interface Daemon.
    <notice -- Dec 27 20:11:08.455149000> 'novell-httpstkd start' exits with
    status 0
    <notice -- Dec 27 20:11:08.457662000>
    syslog start
    <notice -- Dec 27 20:11:08.477565000> 'syslog start' exits with status
    0
    <notice -- Dec 27 20:11:08.479072000> auditd start
    Starting auditd
    <notice -- Dec 27 20:11:08.525517000> startproc: execve (/sbin/auditd) [
    /sbin/auditd -s disable ], [ CONSOLE=/dev/console SELINUX_INIT=YES
    ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0
    crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
    REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin
    vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/
    SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
    PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes
    ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    _=/sbin/startproc DAEMON=/sbin/auditd ]
    done
    <notice -- Dec 27 20:11:08.721488000> 'auditd start' exits with status
    0
    <notice -- Dec 27 20:11:08.723477000>
    haveged start
    Starting haveged daemon
    <notice -- Dec 27 20:11:08.772775000>
    startproc: execve (/sbin/haveged) [
    /sbin/haveged
    -w
    1024
    -v
    1
    CONSOLE=/dev/console
    SELINUX_INIT=YES
    ROOTFS_FSTYPE=ext3
    SHELL=/bin/sh
    TERM=linux
    ROOTFS_FSCK=0
    crashkernel=256M-:128M
    LC_ALL=POSIX
    INIT_VERSION=sysvinit-2.86
    REDIRECT=/dev/tty1
    COLUMNS=156
    PATH=/bin:/sbin:/usr/bin:/usr/sbin
    vga=0x31a
    DO_CONFIRM=
    RUNLEVEL=5
    PWD=/
    SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
    PREVLEVEL=N
    LINES=60
    HOME=/
    SHLVL=2
    splash=silent
    SPLASH=yes
    ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    _=/sbin/startproc
    DAEMON=/sbin/haveged
    done
    <notice -- Dec 27 20:11:08.977862000> 'haveged start' exits with status
    0
    <notice -- Dec 27 20:11:08.979577000> rpcbind start
    Starting rpcbind
    <notice -- Dec 27 20:11:09.33208000> startproc: execve (/sbin/rpcbind) [
    /sbin/rpcbind ], [ CONSOLE=/dev/console SELINUX_INIT=YES
    ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0
    crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
    REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin
    vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/
    SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
    PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes
    ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    _=/sbin/startproc DAEMON=/sbin/rpcbind ]
    done
    <notice -- Dec 27 20:11:09.106169000> 'rpcbind start' exits with status
    0
    <notice -- Dec 27 20:11:09.107657000>
    splash_early start
    <notice -- Dec 27 20:11:09.150175000>
    'splash_early start' exits with status 0
    <notice -- Dec 27 20:11:09.152071000> nfs start
    Not starting NFS client services - no NFS found in /etc/fstab:unused
    <notice -- Dec 27 20:11:09.212532000> 'nfs start' exits with status 6
    <notice -- Dec 27 20:11:09.214284000> smbfs start
    Mount CIFS File Systems unused
    <notice -- Dec 27 20:11:09.270080000> 'smbfs start' exits with status 6
    <notice -- Dec 27 20:11:09.272092000> kbd start
    Loading console font lat9w-16.psfu -m trivial G0:loadable
    doneLoading keymap assuming iso-8859-15 euro
    Loading /usr/share/kbd/keymaps/i386/qwerty/us.map.gz
    doneLoading compose table latin1.adddone
    Start Unicode mode
    done
    <notice -- Dec 27 20:11:10.78851000> 'kbd start' exits with status 0
    <notice -- Dec 27 20:11:10.81452000> alsasound start
    <notice -- Dec 27 20:11:10.119462000> 'alsasound start' exits with
    status 0
    <notice -- Dec 27 20:11:10.120953000> bluez-coldplug start
    done
    <notice -- Dec 27 20:11:10.159870000> 'bluez-coldplug start' exits with
    status 0
    <notice -- Dec 27 20:11:10.161649000> irq_balancer start
    Starting irqbalance
    <notice -- Dec 27 20:11:10.228044000> startproc: execve
    (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console
    SELINUX_INIT=YES ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux
    ROOTFS_FSCK=0 crashkernel=256M-:128M LC_ALL=POSIX
    INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156
    PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5
    PWD=/
    SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
    PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes
    ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
    done
    <notice -- Dec 27 20:11:10.240220000> 'irq_balancer start' exits with
    status 0
    <notice -- Dec 27 20:11:10.241681000> java.binfmt_misc start
    Starting java.binfmt_misc done
    <notice -- Dec 27 20:11:10.312192000>
    'java.binfmt_misc start' exits with status 0
    <notice -- Dec 27 20:11:10.314207000> mcelog start
    Starting mcelog...
    <notice -- Dec 27 20:11:10.378680000> startproc: execve
    (/usr/sbin/mcelog) [ /usr/sbin/mcelog --daemon --config-file
    /etc/mcelog/mcelog.conf ], [ CONSOLE=/dev/console SELINUX_INIT=YES
    ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0
    crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
    REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin
    vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/
    SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
    PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes
    ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
    _=/sbin/startproc DAEMON=/usr/sbin/mcelog ]
    done
    <notice -- Dec 27 20:11:10.428551000> 'mcelog start' exits with status
    0
    <notice -- Dec 27 20:11:10.429934000&

  • Mfc210c printer issues

    Thanx Snowman for reminding me to start new thread.
    anyway, since the latest kernel upgrade, my printer stopped. the scanner part of it works but I can't get it to print.
    I get this error using KDE printer set up:
    getting this error now:
    A print error occurred. Error message received from system:
    cupsdoprint -P 'MFC210C' -J '' -H 'localhost:631' -U 'root' -o ' multiple-document-handling=separate-documents-uncollated-copies orientation-requested=3' '/opt/kde/share/apps/kdeprint/testprint.ps' : execution failed with message:
    client-error-not-possible
    I get this was error using http://localhost:631/printers/mfc210c:
    mfc210c "Printer not connected; will retry in 30 seconds..."
    yet I can scan on the same unit so the printer is connected. (3-in-one) printer.
    Tried reinstalling printer but nothing.
    I can su to root but can't login into root from kdm.
    dmesg:
    dmesg
    Linux version 2.6.20-ARCH (root@Laptop) (gcc version 4.1.2) #1 SMP PREEMPT Wed Feb 28 21:59:38 CET 2007
    BIOS-provided physical RAM map:
    sanitize start
    sanitize end
    copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
    copy_e820_map() type is E820_RAM
    copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
    copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
    copy_e820_map() start: 0000000000100000 size: 000000001fefc000 end: 000000001fffc000 type: 1
    copy_e820_map() type is E820_RAM
    copy_e820_map() start: 000000001fffc000 size: 0000000000003000 end: 000000001ffff000 type: 3
    copy_e820_map() start: 000000001ffff000 size: 0000000000001000 end: 0000000020000000 type: 4
    copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
    copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
    copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
    BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
    BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    Entering add_active_range(0, 0, 131068) 0 entries of 256 used
    Zone PFN ranges:
      DMA             0 ->     4096
      Normal       4096 ->   131068
      HighMem    131068 ->   131068
    early_node_map[1] active PFN ranges
        0:        0 ->   131068
    On node 0 totalpages: 131068
      DMA zone: 32 pages used for memmap
      DMA zone: 0 pages reserved
      DMA zone: 4064 pages, LIFO batch:0
      Normal zone: 991 pages used for memmap
      Normal zone: 125981 pages, LIFO batch:31
      HighMem zone: 0 pages used for memmap
    DMI 2.3 present.
    ACPI: RSDP (v000 ASUS                                  ) @ 0x000f5fd0
    ACPI: RSDT (v001 ASUS   A7V8X    0x42302e31 MSFT 0x31313031) @ 0x1fffc000
    ACPI: FADT (v001 ASUS   A7V8X    0x42302e31 MSFT 0x31313031) @ 0x1fffc0b2
    ACPI: BOOT (v001 ASUS   A7V8X    0x42302e31 MSFT 0x31313031) @ 0x1fffc030
    ACPI: MADT (v001 ASUS   A7V8X    0x42302e31 MSFT 0x31313031) @ 0x1fffc058
    ACPI: DSDT (v001   ASUS A7V8X    0x00001000 MSFT 0x0100000b) @ 0x00000000
    ACPI: PM-Timer IO Port: 0xe408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 6:6 APIC version 16
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode:  Flat.  Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
    Detected 1675.234 MHz processor.
    Built 1 zonelists.  Total pages: 130045
    Kernel command line: BOOT_IMAGE=arch ro root=/dev/hda3 devfs=nomount
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514188k/524272k available (2309k kernel code, 9520k reserved, 763k data, 256k init, 0k highmem)
    virtual kernel memory layout:
        fixmap  : 0xfff83000 - 0xfffff000   ( 496 kB)
        pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
        vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
        lowmem  : 0xc0000000 - 0xdfffc000   ( 511 MB)
          .init : 0xc0407000 - 0xc0447000   ( 256 kB)
          .data : 0xc03415f1 - 0xc040024c   ( 763 kB)
          .text : 0xc0100000 - 0xc03415f1   (2309 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 3353.63 BogoMIPS (lpj=6707279)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 256K (64 bytes/line)
    CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 11k freed
    Early unpacking initramfs... done
    ACPI: Core revision 20060707
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    CPU0: AMD Athlon(TM) XP 2000+ stepping 02
    Total of 1 processors activated (3353.63 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    Brought up 1 CPUs
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xf1720, last bus=1
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14) *9
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
    PCI quirk: region e400-e47f claimed by vt8235 PM
    PCI quirk: region e800-e80f claimed by vt8235 SMB
    Boot video device is 0000:01:00.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 15 devices
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    NetLabel: Initializing
    NetLabel:  domain hash size = 128
    NetLabel:  protocols = UNLABELED CIPSOv4
    NetLabel:  unlabeled traffic allowed by default
    pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
    pnp: 00:02: ioport range 0xe800-0xe81f could not be reserved
    pnp: 00:0e: ioport range 0x290-0x291 has been reserved
    pnp: 00:0e: ioport range 0x370-0x372 has been reserved
    PCI: Bridge: 0000:00:01.0
      IO window: d000-dfff
      MEM window: e7000000-e7dfffff
      PREFETCH window: e7f00000-efffffff
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 196608 bytes)
    TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
    TCP: Hash tables configured (established 16384 bind 8192)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 1316k freed
    Simple Boot Flag at 0x3a set to 0x1
    apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 [email protected]).
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    input: Power Button (FF) as /class/input/input0
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input1
    ACPI: Power Button (CM) [PWRB]
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    loop: loaded (max 8 devices)
    input: Macintosh mouse button emulation as /class/input/input2
    PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    PNP: PS/2 controller doesn't have AUX irq; using default 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /class/input/input3
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    ACPI: (supports S0 S1 S4 S5)
    Time: tsc clocksource has been installed.
    Freeing unused kernel memory: 256k freed
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    PCI: Enabling device 0000:00:0e.0 (0014 -> 0016)
    ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 16
    ohci_hcd 0000:00:0e.0: OHCI Host Controller
    ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:0e.0: irq 16, io mem 0xe6000000
    USB Universal Host Controller Interface driver v3.0
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 3 ports detected
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    PCI: Enabling device 0000:00:0e.2 (0014 -> 0016)
    ACPI: PCI Interrupt 0000:00:0e.2[C] -> GSI 19 (level, low) -> IRQ 17
    ehci_hcd 0000:00:0e.2: EHCI Host Controller
    ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:0e.2: irq 17, io mem 0xe5000000
    ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 5 ports detected
    ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 18
    ehci_hcd 0000:00:10.3: EHCI Host Controller
    ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 3
    ehci_hcd 0000:00:10.3: irq 18, io mem 0xe4800000
    ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 6 ports detected
    ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 18
    uhci_hcd 0000:00:10.0: UHCI Host Controller
    uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:10.0: irq 18, io base 0x00009400
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:10.1[b] -> GSI 21 (level, low) -> IRQ 18
    uhci_hcd 0000:00:10.1: UHCI Host Controller
    uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:10.1: irq 18, io base 0x00009000
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 18
    uhci_hcd 0000:00:10.2: UHCI Host Controller
    uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:10.2: irq 18, io base 0x00008800
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    PCI: Enabling device 0000:00:0e.1 (0014 -> 0016)
    ACPI: PCI Interrupt 0000:00:0e.1[b] -> GSI 18 (level, low) -> IRQ 19
    ohci_hcd 0000:00:0e.1: OHCI Host Controller
    ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 7
    ohci_hcd 0000:00:0e.1: irq 19, io mem 0xe5800000
    usb 4-1: new low speed USB device using uhci_hcd and address 2
    usb 4-1: configuration #1 chosen from 1 choice
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    usb 5-2: new full speed USB device using uhci_hcd and address 2
    VP_IDE: IDE controller at PCI slot 0000:00:11.1
    ACPI: Unable to derive IRQ for device 0000:00:11.1
    ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
    VP_IDE: chipset revision 6
    VP_IDE: not 100% native mode: will probe irqs later
    VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
        ide0: BM-DMA at 0x8400-0x8407, BIOS settings: hda:DMA, hdb:DMA
        ide1: BM-DMA at 0x8408-0x840f, BIOS settings: hdc:pio, hdd:DMA
    Probing IDE interface ide0...
    usb 5-2: configuration #1 chosen from 1 choice
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver hiddev
    hda: Maxtor 6L200R0, ATA DISK drive
    input: Logitech USB-PS/2 Optical Mouse as /class/input/input4
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-1
    usbcore: registered new interface driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    scsi0 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    scsi 0:0:0:0: Direct-Access     Brother  MFC-210C         1.00 PQ: 0 ANSI: 2
    sd 0:0:0:0: Attached scsi removable disk sda
    usb-storage: device scan complete
    hdb: CD-RW IDE5224, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdd: WDC WD64AA, ATA DISK drive
    ide1 at 0x170-0x177,0x376 on irq 15
    libata version 2.00 loaded.
    hda: max request size: 512KiB
    hda: 398297088 sectors (203928 MB) w/16384KiB Cache, CHS=24792/255/63, UDMA(33)
    hda: cache flushes supported
    hda: hda1 hda2 hda3
    hdd: max request size: 128KiB
    hdb: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    hdd: 12594960 sectors (6448 MB) w/2048KiB Cache, CHS=13328/15/63
    hdd: cache flushes not supported
    hdd: hdd1
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    usbcore: registered new interface driver usbserial
    drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
    usbcore: registered new interface driver usbserial_generic
    drivers/usb/serial/usb-serial.c: USB Serial Driver core
    Capability LSM initialized
    b44.c:v1.01 (Jun 16, 2006)
    ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 19
    eth0: Broadcom 4400 10/100BaseT Ethernet 00:e0:18:9d:ba:bb
    drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS
    drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5
    drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0
    usbcore: registered new interface driver visor
    drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver
    fuse init (API version 7.8)
    PCI: Enabling device 0000:00:0f.0 (0004 -> 0005)
    ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 19
    PCI: Enabling device 0000:00:0d.0 (0004 -> 0005)
    ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 20
    Installing spdif_bug patch: Audigy 1 ES [SB0160]
    drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0161
    usbcore: registered new interface driver usblp
    drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    Linux agpgart interface v0.101 (c) Dave Jones
    fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
    [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0
    EXT3 FS on hda3, internal journal
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on hdd1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 265064k swap on /dev/hda2.  Priority:-1 extents:1 across:265064k
    b44: eth0: Link is up at 100 Mbps, full duplex.
    b44: eth0: Flow control is off for TX and off for RX.
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    Mobile IPv6
    eth0: no IPv6 routers present
    NET: Registered protocol family 4
    NET: Registered protocol family 5
    Am I screwing up somewhere?

    [SOLVED]cupwrapper script needed /bin/csh to be /usr/bin/tcsh. printer works

  • Cant mount /var at boot

    I am experiencing problem with our v480 server, as ocasionally it fails to boot and gives cant mount /var error and goes into single user mode. (Log file is attached below). Once this happens, it doesnt come back into runlevel 3 until it is completely powered off and on.
    I fixed the (ufs log for / changed state to Error ) message by removing the patch 113073-14 and making / as nologging in /etc/vfstab file. But the problem with not mounting /var still comes up. I am attaching the log file below with the ufslog error message included (which doesnt show up after patch removal).
    I am looking for any suggestions or hints, what would be causing this. Thanks a lot.
    Sun Fire 480R, No Keyboard
    Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
    OpenBoot 4.13.0, 4096 MB memory installed, Serial ##
    Creating CPU memory layout properties.
    Initializing 1MB of memory at addr a0ffb92000 - Initializing 12MB of memory at addr a0ff002000 - Initializing 16MB of memory at addr a0fe002000 - Initializing 4064MB of memory at addr a000000000 \ | / - \ | / - Reading temperature limits from FRUPROMs: CPU0/2 BACKPLANE
    Environmental monitor is ON
    Rebooting with command: boot
    Boot device: disk File and args:
    Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
    FCode UFS Reader 1.12 00/07/17 15:48:16.
    Loading: /platform/SUNW,Sun-Fire-480R/ufsboot
    Loading: /platform/sun4u/ufsboot
    | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ SunOS Release 5.9 Version Generic_117171-12 64-bit
    Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / WARNING: Cannot create minor node for <JNI,FCR> <jnic146x> <0>
    Can't find clone devinfo node
    jnic146x0: Hba: JNI,FCR Model: FCE-6460-N
    jnic146x0: FCode: Version 3.9 [3505]
    jnic146x0: IRQ: 1 Channel: 1
    jnic146x0: SubVend: 1242 Sub: 6460 Rev: 100 Vend: 1242 Dev: 1460
    jnic146x0: WWNN: 100000017301494A WWPN: 200000017301494A
    jnic146x0: Auto-negotiating link speed
    jnic146x0: Configured as Fabric port
    jnic146x0: JNIC v5.2.1.HIT.M05 (03082100)
    jnic146x0: Copyright(c) 1995-2003 JNI Corp, All Rights Reserved.
    jnic146x0: Link Up: 2Gig
    jnic146x0: Port 010200 (WWN 50060E80004417B1:50060E80004417B1) online.
    jnic146x0: Port 010600 (WWN 50060E80004417B3:50060E80004417B3) online.
    jnic146x0: Network Port FFFC01 (WWN 100000051E341635:20FD00051E341635) available.
    WARNING: Cannot create minor node for <JNI,FCR> <jnic146x> <1>
    Can't find clone devinfo node
    jnic146x1: Hba: JNI,FCR Model: FCE-6460-N
    jnic146x1: FCode: Version 3.9 [3505]
    jnic146x1: IRQ: 1 Channel: 1
    jnic146x1: SubVend: 1242 Sub: 6460 Rev: 100 Vend: 1242 Dev: 1460
    jnic146x1: WWNN: 10000001730146A9 WWPN: 20000001730146A9
    jnic146x1: Auto-negotiating link speed
    jnic146x1: Configured as Fabric port
    jnic146x1: JNIC v5.2.1.HIT.M05 (03082100)
    jnic146x1: Copyright(c) 1995-2003 JNI Corp, All Rights Reserved.
    jnic146x1: Link Up: 2Gig
    jnic146x1: Port 010200 (WWN 50060E80004417B0:50060E80004417B0) online.
    jnic146x1: Port 010600 (WWN 50060E80004417B2:50060E80004417B2) online.
    jnic146x1: Network Port FFFC01 (WWN 100000051E344E7D:20FD00051E344E7D) available.
    jnic146x0: Target0: Port 010200 (WWN 50060E80004417B1:50060E80004417B1) online.
    jnic146x0: Target1: Port 010600 (WWN 50060E80004417B3:50060E80004417B3) online.
    jnic146x1: Target0: Port 010200 (WWN 50060E80004417B0:50060E80004417B0) online.
    jnic146x1: Target1: Port 010600 (WWN 50060E80004417B2:50060E80004417B2) online.
    jnic146x0: Target0: Lun0 present.
    jnic146x1: Target0: Lun0 present.
    jnic146x0: Target0: Lun1 present.
    jnic146x1: Target0: Lun1 present.
    jnic146x0: Target0: Lun2 present.
    jnic146x1: Target0: Lun2 present.
    jnic146x0: Target0: Lun3 present.
    jnic146x1: Target0: Lun3 present.
    jnic146x0: Target0: Lun4 present.
    jnic146x1: Target0: Lun4 present.
    jnic146x0: Target1: Lun0 present.
    jnic146x1: Target1: Lun0 present.
    jnic146x0: Target1: Lun1 present.
    jnic146x1: Target1: Lun1 present.
    jnic146x0: Target1: Lun2 present.
    jnic146x1: Target1: Lun2 present.
    jnic146x0: Target1: Lun3 present.
    jnic146x1: Target1: Lun3 present.
    jnic146x0: Target1: Lun4 present.
    jnic146x1: Target1: Lun4 present.
    WARNING: Error writing ufs log state
    WARNING: ufs log for / changed state to Error
    WARNING: Please umount(1M) / and run fsck(1M)
    VxVM sysboot INFO V-5-2-3390 Starting restore daemon...
    VxVM sysboot INFO V-5-2-3409 starting in boot mode...
    NOTICE: VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk
    NOTICE: VxVM vxdmp V-5-0-34 added disk array D6001A6B, datype = HDS9500V
    configuring IPv4 interfaces: ce0 ce1.
    Hostname: beta23
    VxVM INFO V-5-2-3247 starting special volumes ( swapvol rootvol usr var opt )...
    Configuring /dev and /devices
    Configuring the /dev directory (compatibility devices)
    mount: /dev/vx/dsk/bootdg/var is already mounted, /var is busy,
    or the allowable number of mount points has been exceeded
    mount: mount-point /var/run does not exist.
    VxVM vxvm-startup2 INFO V-5-2-503 VxVM general startup...
    Dec 13 22:09:04 vxvm:vxconfigd: V-5-1-1589 enable failed: Error in disk group configuration copies
    Dec 13 22:09:04 vxvm:vxconfigd: Database file not found; transactions are disabled.
    VxVM vxvm-startup2 ERROR V-5-2-3656 Vold is not enabled for transactions
    No volumes started
    INIT: Cannot create /var/adm/utmpx
    INIT: failed write of utmpx entry:" "
    INIT: failed write of utmpx entry:" "
    INIT: SINGLE USER MODE

    Thank you so much for your response.
    This error doesnt occur in all boots, but once it occurs , we have to power off the machine and power back on and machine boots normally into run level 3 without this /var error. otherwise a simple reboot doesnt help and we get the same error.
    Here is the /etc/vfstab file, may be you can suggest further.
    #device device mount FS fsck mount mount
    #to mount to fsck point type pass at boot options
    fd - /dev/fd fd - no -
    /proc - /proc proc - no -
    /dev/vx/dsk/bootdg/swapvol - - swap - no -
    /dev/vx/dsk/bootdg/rootvol /dev/vx/rdsk/bootdg/rootvol / ufs 1 no nologging
    /dev/vx/dsk/bootdg/usr /dev/vx/rdsk/bootdg/usr /usr ufs 1 no -
    /dev/vx/dsk/bootdg/var /dev/vx/rdsk/bootdg/var /var ufs 1 no -
    /dev/vx/dsk/bootdg/opt /dev/vx/rdsk/bootdg/opt /opt ufs 2 yes -
    swap - /tmp tmpfs - yes -
    #/dev/odm added for support of Oracle access to VxFS
    /dev/odm - /dev/odm odm - no -
    #NOTE: volume rootvol (/) encapsulated partition c0t0d0s0
    #NOTE: volume swapvol (swap) encapsulated partition c0t0d0s1
    #NOTE: volume usr (/usr) encapsulated partition c0t0d0s3
    #NOTE: volume var (/var) encapsulated partition c0t0d0s4
    #NOTE: volume opt (/opt) encapsulated partition c0t0d0s5
    /dev/vx/dsk/dxdbdg/u01 /dev/vx/rdsk/dxdbdg/u01 /u01 vxfs - yes suid
    /dev/vx/dsk/dxdbdg/u02 /dev/vx/rdsk/dxdbdg/u02 /u02 vxfs - yes suid
    /dev/vx/dsk/dxdbdg/u04 /dev/vx/rdsk/dxdbdg/u04 /u04 vxfs - yes suid
    /dev/vx/dsk/dxdbdg/u05 /dev/vx/rdsk/dxdbdg/u05 /u05 vxfs - yes suid
    /dev/vx/dsk/dxdbdg/u06 /dev/vx/rdsk/dxdbdg/u06 /u06 vxfs - yes suid
    Thanks again

  • Need guidance on syslog from fabmgr

    Hi all, I'm getting the following syslog (also not in standard format) on a 9010 running 4.3.1 + SMUs:
    RP/0/RSP0/CPU0:Nov 27 05:55:46.484 : fabmgr[222]: Fabric backplane crossbar
    link underwent link retraining to recover from a transient error: Physical 
    slot 8
    RP/0/RSP0/CPU0:Nov 30 20:58:31.316 : fabmgr[222]: Fabric backplane crossbar
    link underwent link retraining to recover from a transient error: Physical 
    slot 8
    RP/0/RSP0/CPU0:Dec  1 15:23:48.894 : fabmgr[222]: Fabric backplane crossbar
    link underwent link retraining to recover from a transient error: Physical 
    slot 8
    RP/0/RSP0/CPU0:Dec  2 16:15:45.950 : fabmgr[222]: Fabric backplane crossbar
    link underwent link retraining to recover from a transient error: Physical 
    slot 8
    RP/0/RSP0/CPU0:Dec  3 19:46:09.348 : fabmgr[222]: Fabric backplane crossbar
    link underwent link retraining to recover from a transient error: Physical 
    slot 8
    RP/0/RSP0/CPU0:Dec  4 12:43:22.879 : fabmgr[222]: Fabric backplane crossbar
    link underwent link retraining to recover from a transient error: Physical 
    slot 8
    RP/0/RSP0/CPU0:Dec  4 16:26:14.186 : fabmgr[222]: Fabric backplane crossbar
    link underwent link retraining to recover from a transient error: Physical 
    slot 8
    RP/0/RSP0/CPU0:Dec  5 05:02:46.940 : fabmgr[222]: Fabric backplane crossbar
    link underwent link retraining to recover from a transient error: Physical 
    slot 8
    RP/0/RSP0/CPU0:Dec  5 05:21:34.319 : fabmgr[222]: Fabric backplane crossbar
    link underwent link retraining to recover from a transient error: Physical 
    slot 8
    Any idea where to start looking to try to troubleshoot this?  I found out via show platform summary that physical slot 8 refers to slot 6, but beyond that I'm stumped. 

    Hi Aaron,
    Collect the following and open an SR (if you open tomorrow in US hours I'll handle the case).
    'show controllers fabric ltrace crossbar location 0/RSP0/CPU0'
    'show log'
    'show install active summary'
    Thanks,
    Sam

  • X220, dmesg reports hardware error, powertop abnormal power consumption by some devices

    Hi, Linux dmesg command reports this: [ 2072.470923] CPU1: Package power limit notification (total events = 1) [ 2072.470926] CPU0: Package power limit notification (total events = 1) [ 2072.470929] CPU3: Package power limit notification (total events = 1) [ 2072.470932] CPU2: Package power limit notification (total events = 1) [ 2072.476690] CPU3: Package power limit normal [ 2072.476697] CPU2: Package power limit normal [ 2072.476717] CPU0: Package power limit normal [ 2072.476726] CPU1: Package power limit normal [ 2096.847029] [Hardware Error]: Machine check events logged [ 4569.973367] CPU1: Package power limit notification (total events = 2) [ 4569.973378] CPU0: Package power limit notification (total events = 2) [ 4569.973391] CPU3: Package power limit notification (total events = 2) [ 4569.973401] CPU2: Package power limit notification (total events = 2) [ 4570.018411] CPU2: Package power limit normal [ 4570.018415] CPU0: Package power limit normal [ 4570.018417] CPU1: Package power limit normal [ 4570.018419] CPU3: Package power limit normal [ 4643.555059] [Hardware Error]: Machine check events logged [ 4979.410447] CPU1: Package power limit notification (total events = 20) [ 4979.410458] CPU0: Package power limit notification (total events = 20) [ 4979.410471] CPU3: Package power limit notification (total events = 20) [ 4979.410481] CPU2: Package power limit notification (total events = 20) [ 4979.416993] CPU0: Package power limit normal [ 4979.416997] CPU1: Package power limit normal [ 4979.417000] CPU3: Package power limit normal [ 4979.417002] CPU2: Package power limit normal [ 5092.974067] [Hardware Error]: Machine check events logged powetop reports this power consumption, I think that usb, biometric coprocessor and network interface (interfaz de red) are very high. 9.49 W 100,0% Dispositivo USB: Biometric Coprocessor (UPEK) 6.65 W 100,0% Códec de audio hwC0D0: Conexant (pulseaudio ) 100,0% Códec de audio hwC0D3: Intel 5.70 W 100,0% Display backlight 5.70 W 100,0% Display backlight 3.94 W 100,0% Dispositivo USB: F5521gw (Lenovo) 2.61 W 36498 pkts/s Interfaz de red: eth3 (e1000e) Would somebody at Lenovo check this, please? Regards. PD: I'm the guy that hods number of motherboard changed record, three in two months,

    I am seeing similar messages along with intermittent system hanging on my T420 (4178-CTO). Flashplayer seems to exacerbate matters.
    dmesg:
    [ 1431.599033] CPU1: Package power limit notification (total events = 1182)
    [ 1431.599037] CPU3: Package power limit notification (total events = 1182)
    [ 1431.599039] CPU2: Package power limit notification (total events = 1182)
    [ 1431.599042] CPU0: Package power limit notification (total events = 1182)
    [ 1431.610014] CPU1: Package power limit normal
    [ 1431.610017] CPU3: Package power limit normal
    [ 1431.610020] CPU2: Package power limit normal
    [ 1431.610022] CPU0: Package power limit normal
    [ 1499.180524] [Hardware Error]: Machine check events logged
    [ 1788.410430] plugin-containe[3925]: segfault at a9ffd604 ip b298cd61 sp b15b41bc error 4 in libflashplayer.so[b27b8000+fc8000]
    [ 2557.130041] CPU2: Package power limit notification (total events = 1186)
    [ 2557.130045] CPU3: Package power limit notification (total events = 1186)
    [ 2557.130048] CPU1: Package power limit notification (total events = 1186)
    [ 2557.130051] CPU0: Package power limit notification (total events = 1186)
    [ 2557.142042] CPU1: Package power limit normal
    [ 2557.142045] CPU3: Package power limit normal
    [ 2557.142047] CPU2: Package power limit normal
    [ 2557.142049] CPU0: Package power limit normal
    [ 2697.643317] [Hardware Error]: Machine check events logged
    [ 2860.459336] CPU3: Package power limit notification (total events = 1339)
    [ 2860.459339] CPU2: Package power limit notification (total events = 1339)
    [ 2860.459343] CPU1: Package power limit notification (total events = 1339)
    [ 2860.459346] CPU0: Package power limit notification (total events = 1339)
    [ 2860.472336] CPU3: Package power limit normal
    [ 2860.472339] CPU1: Package power limit normal
    [ 2860.472342] CPU0: Package power limit normal
    [ 2860.472344] CPU2: Package power limit normal
    [ 2942.466964] iwlwifi 0000:03:00.0: Tx aggregation enabled on ra = 00:fe:f4:50:e4:d8 tid = 6
    [ 3146.075653] [Hardware Error]: Machine check events logged
    [ 3189.399548] CPU3: Package power limit notification (total events = 1424)
    [ 3189.399551] CPU2: Package power limit notification (total events = 1424)
    [ 3189.399555] CPU1: Package power limit notification (total events = 1424)
    [ 3189.399558] CPU0: Package power limit notification (total events = 1424)
    [ 3189.410570] CPU2: Package power limit normal
    [ 3189.410573] CPU3: Package power limit normal
    [ 3189.410575] CPU1: Package power limit normal
    [ 3189.410578] CPU0: Package power limit normal
    [ 3239.200744] iwlwifi 0000:03:00.0: Tx aggregation enabled on ra = 00:fe:f4:50:e4:d8 tid = 3
    mcelog:
    CPU 0 THERMAL EVENT TSC 47d41bb8fbb
    TIME 1325511755 Mon Jan  2 13:42:35 2012
    Processor 0 below trip temperature. Throttling disabled
    STATUS c000000088320c08 MCGSTATUS 0
    MCGCAP c07 APICID 0 SOCKETID 0
    CPUID Vendor Intel Family 6 Model 42
    Hardware event. This is not a software error.
    MCE 3
    CPU 1 THERMAL EVENT TSC 47d41bba1ee
    TIME 1325511755 Mon Jan  2 13:42:35 2012
    Processor 1 below trip temperature. Throttling disabled
    STATUS c000000088320c08 MCGSTATUS 0
    MCGCAP c07 APICID 1 SOCKETID 0
    CPUID Vendor Intel Family 6 Model 42
    Hardware event. This is not a software error.
    MCE 4
    CPU 3 THERMAL EVENT TSC 47d437f3745
    TIME 1325511755 Mon Jan  2 13:42:35 2012
    Processor 3 below trip temperature. Throttling disabled
    STATUS c000000088300808 MCGSTATUS 0
    martinus@3d6:~/cam/test$ tail /var/log/mcelog
    MCGCAP c07 APICID 0 SOCKETID 0
    CPUID Vendor Intel Family 6 Model 42
    Hardware event. This is not a software error.
    MCE 7
    CPU 2 THERMAL EVENT TSC 7e2f9f9347b
    TIME 1331482204 Sun Mar 11 16:10:04 2012
    Processor 2 below trip temperature. Throttling disabled
    STATUS c000000088230808 MCGSTATUS 0
    MCGCAP c07 APICID 2 SOCKETID 0
    CPUID Vendor Intel Family 6 Model 42

  • [SOLVED] What do do about overheating CPU?

    I kept getting
    Package temperature above threshold, cpu clock throttled.
    so I thought I'd set the maximum cpu frequency from 3700000 to 2700000 which should basically disable the turbo boost by intel. I tried
    cpupower frequency-set -u 2700000
    as it is suggested in https://wiki.archlinux.org/index.php/CP … requencies.
    However doing
    sudo cat /sys/devices/system/cpu/*/cpufreq/scaling_max_freq
    after a reboot still gives back 3700000. Did my change via cpupower not take effect? Is the command I used for checking the current maximum frequency wrong?
    Last edited by mrgreen7 (2015-01-04 20:27:25)

    Thank you for the hints. By the way the machine is a T440p with a Intel(R) Core(TM) i7-4800MQ. The machine is about 4-5 months old.
    I cleaned the fan but the overheating is still happening. I've got not thermal paste at hand at the moment. Frankly, I expect this not to be necessary for a machine of this age.
    In case it helps somehow: Here are the relevant parts of dmesg:
    [ 940.111653] CPU4: Core temperature above threshold, cpu clock throttled (total events = 39584)
    [ 940.111654] CPU5: Core temperature above threshold, cpu clock throttled (total events = 39584)
    [ 940.111667] CPU5: Package temperature above threshold, cpu clock throttled (total events = 46523)
    [ 940.111670] CPU4: Package temperature above threshold, cpu clock throttled (total events = 46523)
    [ 940.111672] CPU1: Package temperature above threshold, cpu clock throttled (total events = 46523)
    [ 940.111673] CPU0: Package temperature above threshold, cpu clock throttled (total events = 46523)
    [ 940.111674] CPU3: Package temperature above threshold, cpu clock throttled (total events = 46523)
    [ 940.111676] CPU6: Package temperature above threshold, cpu clock throttled (total events = 46523)
    [ 940.111677] CPU7: Package temperature above threshold, cpu clock throttled (total events = 46523)
    [ 940.111679] CPU2: Package temperature above threshold, cpu clock throttled (total events = 46523)
    [ 940.112635] CPU4: Core temperature/speed normal
    [ 940.112636] CPU7: Package temperature/speed normal
    [ 940.112637] CPU5: Core temperature/speed normal
    [ 940.112638] CPU6: Package temperature/speed normal
    [ 940.112649] CPU5: Package temperature/speed normal
    [ 940.112651] CPU4: Package temperature/speed normal
    [ 940.112654] CPU0: Package temperature/speed normal
    [ 940.112655] CPU2: Package temperature/speed normal
    [ 940.112656] CPU1: Package temperature/speed normal
    [ 940.112656] CPU3: Package temperature/speed normal
    [ 1049.924457] mce: [Hardware Error]: Machine check events logged
    mce log:
    Hardware event. This is not a software error.
    MCE 0
    CPU 2 THERMAL EVENT TSC 29bd9a79e6
    TIME 1419179950 Sun Dec 21 17:39:10 2014
    Processor 2 heated above trip temperature. Throttling enabled.
    Please check your system cooling. Performance will be impacted
    STATUS 88080c03 MCGSTATUS 0
    MCGCAP c09 APICID 2 SOCKETID 0
    CPUID Vendor Intel Family 6 Model 60
    Hardware event. This is not a software error.
    MCE 1
    CPU 3 THERMAL EVENT TSC 29bd9ac0f3
    TIME 1419179950 Sun Dec 21 17:39:10 2014
    Processor 3 heated above trip temperature. Throttling enabled.
    Please check your system cooling. Performance will be impacted
    STATUS 88080c03 MCGSTATUS 0
    MCGCAP c09 APICID 3 SOCKETID 0
    CPUID Vendor Intel Family 6 Model 60
    Hardware event. This is not a software error.
    MCE 2
    CPU 2 THERMAL EVENT TSC 29bdc2f9e9
    TIME 1419179950 Sun Dec 21 17:39:10 2014
    Processor 2 below trip temperature. Throttling disabled
    STATUS 880a0802 MCGSTATUS 0
    MCGCAP c09 APICID 2 SOCKETID 0
    CPUID Vendor Intel Family 6 Model 60
    Hardware event. This is not a software error.
    MCE 3
    CPU 3 THERMAL EVENT TSC 29bdc326f2
    TIME 1419179950 Sun Dec 21 17:39:10 2014
    Processor 3 below trip temperature. Throttling disabled
    STATUS 880a0802 MCGSTATUS 0
    MCGCAP c09 APICID 3 SOCKETID 0
    CPUID Vendor Intel Family 6 Model 60
    Hardware event. This is not a software error.
    MCE 4
    CPU 5 THERMAL EVENT TSC 1415d339d71
    TIME 1419180396 Sun Dec 21 17:46:36 2014
    Processor 5 heated above trip temperature. Throttling enabled.
    Please check your system cooling. Performance will be impacted
    STATUS 88080803 MCGSTATUS 0
    MCGCAP c09 APICID 5 SOCKETID 0
    CPUID Vendor Intel Family 6 Model 60
    Hardware event. This is not a software error.
    MCE 5
    CPU 4 THERMAL EVENT TSC 1415d33c726
    TIME 1419180396 Sun Dec 21 17:46:36 2014
    Processor 4 heated above trip temperature. Throttling enabled.
    Please check your system cooling. Performance will be impacted
    STATUS 88080803 MCGSTATUS 0
    MCGCAP c09 APICID 4 SOCKETID 0
    CPUID Vendor Intel Family 6 Model 60
    Hardware event. This is not a software error.
    MCE 6
    CPU 4 THERMAL EVENT TSC 1415d5ca4ba
    TIME 1419180396 Sun Dec 21 17:46:36 2014
    Processor 4 below trip temperature. Throttling disabled
    STATUS 88090802 MCGSTATUS 0
    MCGCAP c09 APICID 4 SOCKETID 0
    CPUID Vendor Intel Family 6 Model 60
    Hardware event. This is not a software error.
    MCE 7
    CPU 5 THERMAL EVENT TSC 1415d5cb200
    TIME 1419180396 Sun Dec 21 17:46:36 2014
    Processor 5 below trip temperature. Throttling disabled
    STATUS 88090802 MCGSTATUS 0
    MCGCAP c09 APICID 5 SOCKETID 0
    CPUID Vendor Intel Family 6 Model 60
    For testing I started burnP6 from cpuburn 4 times (quad core) and so far it seems as if the overheating occurs very quickly after I started the burnP6 programs i.e. when the fan is still accelerating and did not reach the rpm level on which it stays roughly constant. Once it reaches that level no overheating messages occur. Could it thus be that something is wrong with the sensors/the fan in the sense that the fan reacts too late? If so, what can I do about it?/ Is this controlled by the OS or is that completely hardware bound?

Maybe you are looking for

  • Is there a way to create more than 2 categories in calendar with ios 6?

    i am having issues with the calendar after upgrading to ios 6. firstly, it wiped all my previously created events off my phone... and now i can only choose between two categories of events? whereas with ios 5, i could choose a variety of events (i.e.

  • How can I remove iPhone from iCloud when I no longer have the phone?

    I switched to a Samsung S4 from my old iPhone 4S, but now I can not get text messages from any of my contacts who have iPhones.  One thing I read to do/try was to remove my iPhone from my iCloud, but I no longer have the phone...how can I do this fro

  • Misc. Issue using LPNs in WMS Enabled Org

    All, When Misc. issue txn is done in WMS Enabled Organization, application enforces to Ship all the quantity in the LPN, is there any way to ship partial quantity in an LPN apart from unpacking and performing Misc. Issue. Regards, LS

  • FaceTime registration error

    I received the following message when trying to register for FaceTime on my MacBook Air: the server encountered an error processing your registration on FaceTime. How do I fix that? My son uses my apple id on his iPod and iPad. I should still be able

  • Photos on pc, photos on pc

    There are two other Itunes accounts on my PC.  How do I sync my phone without loosing my photos?