LC 575 and Comm Slot Ethernet not working

I just acquired an LC 575 and added a Comm Slot Ethernet 10BaseT card. I installed System 7.1 and Network Software Installer 1.5.1, which showed software for the Comm Slot Ethernet. It is connected to a Linksys WRT54G router. When I open the Network control panel to switch to Ethernet, it attempts to switch, then reverts back to LocalTalk saying an error occurred. The link light is lit on the Ethernet card. Not sure why it is not working. Any ideas? I was thinking of trying OS 8.1 with Open Transport to see if it is a software issue. Thanks!

I have a LC 580 which is very similar to the LC 575. I had the best luck with Open Transport when running Mac OS 7.6.1. You also need to download & install the Open Transport 1.1.2 Update. It updates networking in the Mac OS so that you can get online & network with other Macs.
Here's a link to the download: http://download.info.apple.com/AppleSupport_Area/Apple_Software_Updates/English-North_American/Macintosh/Networking- Communications/Open_Transport/OT_1.1.2-NetInstall.sea.bin. In that same folder there's also a multi-part floppy version of the Open Transport 1.1.2 Update for in case your Mac doesn't have a CD-ROM drive.
You may also have other issues after installing the update like Logic Board issues. My LC 580's Logic Board has been acting up lately & probably needs to be replaced.

Similar Messages

  • Card slot does not work after update (14/10/2011)

    Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
    MacBook Pro 13 OS ver. 10.6.8

    Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

  • Ethernet not working on brand new portable

    Ethernet not working. This is a new portable.
    Troubleshooting message: The realtek PCIe GBE family controller adapter is experiencing driver or hardware related problems.
    Reinstalled the driver multiple times .
    Reinstalled the portable to factory default.
    Only one ethernet controller driver available for this portable on the HP site so i used that one.

    Hi:
    The only suggestion I can offer would be to try the driver directly from Realtek.   Fourth file on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy...
    If that fails to do the job, I recommend you either return the PC if you can, or contact HP technical support and submit a support case under the warranty.

  • Thunderbolt ethernet not working when computer wake up from sleep.

    thunderbolt ethernet not working when computer wake up from sleep.
    it will not happen in Mountain loin.

    I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
    In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
    In this case the problem was related to mDNSResponder task which handles all dns queries.
    It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
    The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
    QUESTION: Is your problem independent of the access point / router you connect to.
    I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
    No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
    Software is of poor quality. Not much more to say in this matter.
    I found a very interesting article dated 1996 about programming which I think is still valid.
    Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
    Below the fragment (with some connection to Apple)
    Software is everything. It also s***s.
    "It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage."

  • New Problem, Old Issue. Ethernet not Working

    You may recall this thread: http://forums.verizon.com/t5/FiOS-Internet/FIOS-Ethernet-not-working-Wireless-works-fine/td-p/203838
    If you do, well, I have the same issue once more. It's driving me a bit nuts, to be perfectly honest.
    About 10 days ago I finally had a stable ethernet connection on my Desktop machine to the internet. 8 days ago I marked the other thread as solved as it was still working and thought that my problems had been solved. Unfortunately, here I am 10 days later and suddenly, without warning, the ethernet connection on my Desktop loses internet connectivity.
    I tried turning the router off and then turning it back on, but none of that worked.
    Right now it switches between two different states without little indication as to why it switches between them except that it tends to only do it as a I unplug the cable and then plug it back in. The two states are simply connecting to an "Unidentified Network" which is much the same as the problem I had before, and connecting to an "Unidentified Network" with "Internet Access", except, none of the applications that use internet on the computer actually have Internet access even in this state. The Unidentified Network is the key to knowing I still don't truly have internet access.
    Windows Firewall is off. It's actually been off for awhile now because I forgot to turn it back on after I initially shut it off trying to get it to connect before. Windows 7 (64-bit) is up-to-date, so that's not the issue either. But something is at issue here and I'm not sure what it is. Since the Wireless works, and the Desktop downstairs works on the ethernet, I can only assume it's something with this Desktop. But I'm not sure what it is or why it's doing this.
    Any help with isolating the problem so I can actually fix it and not wait almost two weeks for it to magically work again would be immensely appreciated. Thank you.

    Hello there Viafax and Spacedebris!
    Apologies for not responding sooner. I decided to take a look at a Windows 7 support forum to see if the issue was something specific to that. After explaining in detail, I got this post and I followed the steps. I posted the information I got and then tried the duplex thing.
    The default setting it seems is "Auto Negotiation" which obviously wasnt working.
    I tried 100 Mbps Half Duplex and suddenly I had a connection. I can connect to the internet on my Desktop! So I tried 100 Mbps Full Duplex and.... no connection.
    So, right now it's set to Half Duplex. But I don't even understand why it would need to be Half instead of Full, or the benefits or disadvantages to either. Right now it's working, but I wish I understood more.
    The 192.168.1.25 may have been a typo, since I set the device to run off a static IP of 192.168.1.125, to my knowledge no device on the network has 192.168.1.25
    But other than that brief typo, I do believe the rest of the information is as accurate as I could make it. I typed it as I looked for it, so even if it seems odd, that's what it was.

  • Satellite X200 - flash card slot is not working

    Hi, i got a Toshiba Satellite X200 23P with Vista.
    my flash card slot is not working, i'm using a SD card which i already used some month ago and worked well.
    When i put the card nothing happens.
    Please help.
    Thanks

    Hello Tiger
    Please go to Toshiba support page under http://eu.computers.toshiba-europe.com > Support & Download, choose on drivers download page your notebook model and there you will find this driver. Click on the small red symbol at the right side to pick up info what it is.
    Without many questions try to download and install this driver to see if this will help to make your flash card slot to work properly. You cannot do anything wrong.

  • Ethernet not working with 10.10.1

    Just upgraded to 10.10.1 with my iMac.  The ethernet port is unavailable.  Wireless works.  Tried a PRAM reset and deleting the network configuration.  Still Ethernet not working.  Ideas?

    I suggest you ask this in the Yosemite Forum

  • Thanks for responding.  Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all.  I had numerous apps, music and videos on this touch.  It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

    Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
    Can you help me?
    Thanks

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

    My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

    - After charging for 1/2 hour or so, does iTunes see the iPod?  If yes, restore the iPod from backup.
    - If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • HDMI and PC inputs do not work on my 37AV502R LCD TV

    HDMI inputs and PC inputs do not work consistently
    my Apple TV (HDMI) and computers 2 on HDMI, 1 on PC, display just fine n the TV but after a while the TV goes blank,
    the time is not consistent sometime a few minutes, sometimes a few hours,
    but every time, after the TV goes blank there is nothing I can do, the TV just stays blank, if I unplug and turn back on the TV displays the image for a split second and goes bank again,
    I thought it might be an overheating thing, however sometimes the PC input will stop working but the HDMI input (either one) will work fine,
    has anyone else had this issue?
    Thanks
    A. 

    I'm having the same issue.  As soon as I connect it to VGA or HDMI, it goes into a cycle of flashing on-and-off.  A guy on youtube had the same problem (posted a video identical to my problem) and reportedly fixed it with a firmware update.  
    The problem: the US website doesn't have a firmware download.  The canadian website does, but the update is from 4/2009, and the manufactured date on the back of my TV is 5/2009.  (I also tried the update, but it didn't fix the problem).
    When I call Toshiba to ask about the firmware update, after they confirm I am out of warranty, their automated system keeps hanging up on me.  So frustrating. 

  • How to delete video from iTunes library? del and shift+del are not working - no any reaction

    how to delete video from iTunes library? del and shift+del are not working - no any reaction.

    seb963 wrote:
    Hi
    Currently, iMatch is turned off on my computer, as I do not want to upload any more songs. If I turn it on, will it upload all songs that are currently in my library? Is there another way that deleting them one by one?
    You must enable iTunes Match on the new computer. The best way to accomplish what you want to do is to create a new, empty library by launching iTunes while holding down the Option key (Shift on Windows) and choosing "new library." Do not let iTunes scan for new content, but do enable iTunes Match on the empty library. Once the scan is finished you may delete tracks from the cloud. When you are done switch back to the main iTunes library.

  • TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.

    'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.  I have even done a repair to see if that works and it has not.  Has anyone else found a new way to get it working?

    Try Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Please is an emergenci!!! I put my iPhone 5 to charge and the cable is not working I tried in other pluggers in the house but nothing I don't know what's wrong and I don't have any more battery

    Hey I plug my iPhone 5 and the charger is not working and I'm freaking out!!! It never hasn't happened and I just have in this moment 4% I all ready tried on pther pluggers on the house and is the charges that doesn't work. What should I do?

    @whimsei,
    Hello and thank you for posting back.  What it sounds like is the cable that connects to the screen from the motherboard has either come loose or has a issue after the fall.
    To fix this it would have to be opened up and the connections checked.  If there is an issue with the cable then it would have to be replaced.  This will require either you opening up the system yourself and checking the connections and tha cable or sending it in for repair.
    Here is the link to the maintenance and service guide.  If you feel comfortable doing the work it will help you.
    HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC
    Maintenance and Service Guide
    If you want to send it in for repair here is how.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Please let me know how things go.
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • I bought an IPAD air from state and the screen is not working correctly and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

    i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

    Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
    IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
    Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
    As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
    Egypt authorised service providers : https://locate.apple.com/eg/en/

  • With version 5 of Firefox, if I open more than 1 session, most of the time I cannot see anything in the navigation bar and my back and forward buttons do not work.

    I open 1 session of Firefox 5.0.1 and everything seems to work fine. Then I open a second session of Firefox and most of the time the navigation bar does not show the page that I am on and the back and forward buttons do not work. When this happens, the first session always remains working. I am an internet marketer so I have at least 2 or 3 sessions going at any given time.

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for