LCA03 dump - table MATRIXINDEXTAB does not exist

ERROR:
During the post-installation steps of LiveCache, we experience a short-dump:
DBIF_RSQL_TABLE_KNOWN
LMMRP01U66
SAPLMMRP01
MMRP_LC_MATRIX_IND_TAB_MODIFY
Where it attempts to:
INSERT INTO matrixindextab... (the connection is LCA)
Where the table does not exist.
This is definitely the case, as when I run:
sql_execute select * from matrixindextab
From DBMCLI on the LC Server, the table is not found.
SITUATION
We have just installed SCM 7.0 SR1 and LiveCache 7.7.
There are two servers:
dpd
SCM ABAP Stack
SCM Java Stack
LiveCache Client
dcd
LiveCache Server
RESOLUTION
What can be done to resolve this?
In LC10, we have defined LCA, LDA + LEA in the interface.
LiveCache Monitoring connects successfully for all 3 of these.
We have just stopped and restarted LC, but still no luck (probably due to the fact that a simple restart wouldn't create this table).
Is there a reason why it is looking for this table MATRIXINDEXTAB?
Many thanks in advance for any assistance.
Alistair Crawshaw

This issue is now fixed and LC is now running successfully (the MATRIXINDEXTAB error is no longer shown).
The error was also raised on OSS, and the steps outlined below were followed. Following this, LC started successfully.
Alistair Crawshaw
1.
Please review the note:
1224106 Setting the indicator showing client is liveCache-releva
Run the report /SAPAPO/OM_NON_LC_RELEVANT_CLT and check if you have
the liveCache relevant client and active Planning version in this
client.
3. Please review the note:
640107 Using program /sapapo/delete_lc_anchors in APO 3.0 or higher
and check if you have the report /sapapo/delete_lc_anchors as
post-initialization report for the LCA connection settings.
Did you run the liveCache initialization in /nLC10 using LCA connection?
The SCM 7.0 liveCache installation guide has been updated on the
SAP Service Marketplace at following path:
http://service.sap.com/instguides
-> Installation & Upgrade Guides
-> SAP Business Suite Applications
-> SAP SCM
-> SAP SCM Server
-> Using SAP SCM 7.0 Server
-> Installation Guides
On the SCM systems always the report /SAPAPO/DELETE_LC_ANCHORS has
to be used as a follow-up report of the liveCache initialization.
Did you run the liveCache initialization in LC10 after as post
installation step in LC10 and what report is set as a follow-up
report of the liveCache initialization for LCA connection on
production system?
Thank you & best regards, Natalia Khlopina
Development Support liveCache/MAXDB/SAPDB/liveCache Appl.
SAP Labs, Palo Alto, CA (USA)

Similar Messages

DBIF_RSQL_TABLE_UNKNOWN Table AUSPN_V1 does not exist in the database with ID R/3

Hi All,
We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
Can anyone advise how to solve the issue? Please find below portion of the short dumps.
Category               ABAP Programming Error
Runtime Errors         DBIF_RSQL_TABLE_UNKNOWN
ABAP Program           SAPLCLVF
Application Component CA-CL-CL
Date and Time          11.06.2014 12:08:28
Short text
     A table is unknown or does not exist.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLCLVF" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A table is referred to in an SAP Open SQL statement that either does not
      exist or is unknown to the ABAP Data Dictionary.
     The table involved is "AUSPN_V1" or another table accessed in the statement.
Source Code Extract
Line SourceCde
104     if dupl = kreuz.
105       insert auspc_v2 client specified from table auspcv2
106                              accepting duplicate keys.
107     else.
108       insert auspc_v2 client specified from table auspcv2.
109       if syst-subrc ne 0.
110         message a585 with tabausp.
111       endif.
112     endif.
113     refresh auspcv2.
114   endif.
115   read table auspcv3 index 1.
116   if syst-subrc = 0.
117     if dupl = kreuz.
118       insert auspc_v3 client specified from table auspcv3
119                              accepting duplicate keys.
120     else.
121       insert auspc_v3 client specified from table auspcv3.
122       if syst-subrc ne 0.
123         message a585 with tabausp.
124       endif.
125     endif.
126     refresh auspcv3.
127   endif.
128   read table auspnv1 index 1.
129   if syst-subrc = 0.
130     if dupl = kreuz.
131       insert auspn_v1 client specified from table auspnv1
132                              accepting duplicate keys.
133     else.
>>>>>       insert auspn_v1 client specified from table auspnv1.
135       if syst-subrc ne 0.
136         message a585 with tabausp.
137       endif.
138     endif.
139     refresh auspnv1.
140   endif.
141   read table auspnv2 index 1.
142   if syst-subrc = 0.
143     if dupl = kreuz.
144       insert auspn_v2 client specified from table auspnv2
145                              accepting duplicate keys.
146     else.
147       insert auspn_v2 client specified from table auspnv2.
148       if syst-subrc ne 0.
149         message a585 with tabausp.
150       endif.
151     endif.
152     refresh auspnv2.
153   endif.

Hello
Please check on transaction SE11 if this table exists and if it is active.
Also, it may be a database issue. What is your database?
BR
Caetano

Table TTZDF does not exist on database

HI forum
i am installing the last SAPIDES Ehp3 Linux / Maxdb during the process of installation all job were imported sucessfully 32 of 50 , in the phase CHECK DDIC PASSWORD, the system can´t do log in.
Review the log in the work directory (dev_w0) the follow message is generated.
A Sat Jun 12 21:19:56 2010
A **GENER Trace switched off ***
B dbmyclu : info : my major identification is 3231713892, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is CF0B144C2E40F845E1000000C0A00A64.
B dbmyclu : info : current optimistic cluster level: 2
B dbmyclu : info : pessimistic reads set to 2.
C
C Sat Jun 12 21:20:15 2010
C *** ERROR =>   prepare() of C_0063, rc=1, rcSQL=-942 (POS(95) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(95) Unknown table name:TTZDF)
C sc_p=0x2b4da28435b8,no=63,idc_p=(nil),con=0,act=0,slen=190,smax=256,#vars=1,stmt=0x19449e10,table=TTZDF
C SELECT "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "TIMETO" FROM "TTZDF"
C   WHERE "CLIENT" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" WITH LOCK ISOLATION LEVEL 1;
B ***LOG BZA=> table TTZDF      does not exist on database R/3
B *** ERROR => Buffer loading failed: {fcode=293, rc=32, cnt=0, table='TTZDF'}
C *** ERROR =>   prepare() of C_0063, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28435b8,no=63,idc_p=0x2b4da2909220,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x19449e10,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:26 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(95) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(95) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=(nil),con=0,act=0,slen=190,smax=256,#vars=1,stmt=0x1944e480,table=TTZDF
C SELECT "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "TIMETO" FROM "TTZDF"
C   WHERE "CLIENT" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" WITH LOCK ISOLATION LEVEL 1;
B ***LOG BZA=> table TTZDF      does not exist on database R/3
B *** ERROR => Buffer loading failed: {fcode=293, rc=32, cnt=0, table='TTZDF'}
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:28 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:30 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:31 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:21:18 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:21:21 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:21:29 2010
C *** ERROR =>   prepare() of C_0066, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da2843780,no=66,idc_p=0x2b4da29093e8,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x194421a0,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
M ***LOG R47=> ThResFree, delete (001024) .
I search notes and in sdn forum any information about this error, but there isn´t information.
How i can solve this inconsistence durant the installation for finish the SAP IDES installation.
Hi forums
cheking the process of the installation, the problem i wait have it solve doing the reinstallation with any adjust in the database release .. i will be comment the process to the solution.
Jairo

thie process was solved with a new installation-

Table Z does not exist in the database

Hi,
I have created a Z table and modified the DataType from NUMC to DEC and transported to Quality server
and it is giving an information error that (Table Z does not exist in the database) then once again
i modified the DataType from DEC to NUMC and transported to Quality server then still it is giving an information error that
(Table Z does not exist in the database) please help me out in this issue.
Thanks in advance.

Hi Jayanthumer,
Have you Activated (Ctrl + F3) the Table in SE11 before transporting to Quality server ?
Try to activate (Ctrl + F3) the table in SE11 of your Quality server...
It may not be imported properly into Quality server...
Ask to BASIS person about errors/warnings while importing to Quality Server..
Also activate all dataelement and domains.... make sure all things are active...
Once you activate it then it will create the table in database... till then there will be no table in database...
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

Licecache table missing Table MATRIXINDE does not exist in the database wit

Hello,
We recently done a system copy of our APO system, everything went well. in case of Livecache there are 2 problem
1) when we do the integration for LCA/LDA/LCA while we mentione the Livecache server it is not taking the host name , it is only picking the IP address of the livecache server. If we tried host name, it times out.
2) once we give the IP address as livecache server we can start the live cache server. Bure there is only two tables in it
when we run
transaction Livecache Check (/SAPAPO/OM03) we get the erro i.e.Table MATRIXINDE does not exist in the database with ID LCA
runtime error DBIF_RSQL_TABLE_UNKNOWN
When we look into the tables there are only 2 tables in it
AAPSYSNAME
LCA_WARNINGS
when I compare with other system...it is missing a lots of other tables..
We did re-initialized the livecache.
Appreciate your help in this

Hello Sudhir,
1) Did you create the SAP ticket where this issue is reported?
2) It's good to know more details about the APO version, liveCache/LCA versions on your
    source & target systems.
    What note or document did you follow to do a system copy of our APO system?
3) Please pay attention to the recommendations in the SAP notes:::
         877203     Post steps after the Homogenous liveCache copy usi u2026
         886103    System Landscape Copy for SAP SCM
Thank you and best regards, Natalia Khlopina

OTEXBAS add on installation error: table ZAUTHCUST does not exist

HI,
i am installing an add on OTEXBAS. The installation terminated returning the error--- ZAUTHCUST does not exist.
kindly suggest how to resolve this issue.
the import log is below:
ABAP Dictionary: Activation
Transport request   : SAPK-301COINOTEXBAS
System              : SPS
tp path             : tp
Version and release: 376.03.74 701
Program start============================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
User.....................: DDIC
Date, time...............: 24.03.2014, 13:32:52
Platform.................: CUSTOMER-SPS(701)/MSSQL/WindowsNT/mb4ba1025vs
Tool.....................: BATCH/RADMASG0
Log......................: F, \\mb4ba1025vs\sapmnt\trans\tmp\SAPA-301COINOTEXBAS
Program parameters:
Input Medium...............: Transp. Request SAPK-301COINOTEXBAS
Activation Method..........: Inactv.
Chk Mode...................: T
Version to be activated....: M
Versions to be deleted.....: All versions are deleted
Lock Against Paral. Exec...: Shared
Independent Statistics Log.: being written
Parallel Mode..............: Switched on
..Resources................: 50% of Dialog Processes, Maximum 4 Processes
.Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
=========================================================================
*** Activate objects at level 2
*** Activate objects at level 3
*** Activate objects at level 4
Table ZAUTHCUST does not exist
*** Activate objects at level 5
*** Activate objects at level 6
*** Activate objects at level 7
*** Activate objects at level 8
*** Activate objects at level 9
*** Activate objects at level 10
*** Activate objects at level 11
*** Activate objects at level 12
*** Activate objects at level 13
*** Activate objects at level 14
*** Activate objects at level 15
*** Activate objects at level 16
*** Activate objects at level 17
*** Activate objects at level 18
*** Activate objects at level 19
        Object Activation
End phase 001 ***********************************************************
Start phase 002 **********************************************************
        Final log
Following objects not activated/deleted or activated/deleted w. warning:
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
Table ZAUTHCUST could not be activated
        Final log
End phase 002 ***********************************************************
Start phase 003 **********************************************************
        Statistics on Activated and Deleted Objects
Number of objects to be activated............: 2276
Objects not activated........................: 1
Activated objects with errors in dependencies: 1
Objects activated with warning...............: 1715
Successfully activated objects...............: 559
Number of objects to be deleted..............: 0
Objects not successfully deleted.............: 0
Successfully deleted objects.................: 0
Tables/views with DROP/CREATE................: 0
No. of them marked for DROP/CREATE: 0
Not marked for DROP/CREATE: 0
Number of nametabs to be deleted.............: 0
Successfully deleted nametabs................: 0
Nametabs that were not successfully deleted..: 0
        Statistics on Activated and Deleted Objects
End phase 003 ***********************************************************
=========================================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
Return code..............: 8
Phase 001..................: 00:00:41 (Object Activation)
Phase 002..................: 00:00:01 (Final log)
Phase 003..................: < 1 sec. (Statistics on Activated and ...)
Program runtime..........: 00:00:46
Date, time...............: 24.03.2014, 13:33:38
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20140324133339
Ended with return code: ===> 8 <===

Mamta:
I am not sure why you post these in the SAP for Utilities space. this is for the Utilities industry. I will move this one to ILM.
regards,
bill.

Add on OTEXBAS installation error: table zauthcust does not exist

HI,
i am installing an add on OTEXBAS. The installation terminated returning the error--- ZAUTHCUST does not exist.
kindly suggest how to resolve this issue.
the import log is below:
ABAP Dictionary: Activation
Transport request   : SAPK-301COINOTEXBAS
System              : SPS
tp path             : tp
Version and release: 376.03.74 701
Program start============================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
User.....................: DDIC
Date, time...............: 24.03.2014, 13:32:52
Platform.................: CUSTOMER-SPS(701)/MSSQL/WindowsNT/mb4ba1025vs
Tool.....................: BATCH/RADMASG0
Log......................: F, \\mb4ba1025vs\sapmnt\trans\tmp\SAPA-301COINOTEXBAS
Program parameters:
Input Medium...............: Transp. Request SAPK-301COINOTEXBAS
Activation Method..........: Inactv.
Chk Mode...................: T
Version to be activated....: M
Versions to be deleted.....: All versions are deleted
Lock Against Paral. Exec...: Shared
Independent Statistics Log.: being written
Parallel Mode..............: Switched on
..Resources................: 50% of Dialog Processes, Maximum 4 Processes
.Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
=========================================================================
*** Activate objects at level 2
*** Activate objects at level 3
*** Activate objects at level 4
Table ZAUTHCUST does not exist
*** Activate objects at level 5
*** Activate objects at level 6
*** Activate objects at level 7
*** Activate objects at level 8
*** Activate objects at level 9
*** Activate objects at level 10
*** Activate objects at level 11
*** Activate objects at level 12
*** Activate objects at level 13
*** Activate objects at level 14
*** Activate objects at level 15
*** Activate objects at level 16
*** Activate objects at level 17
*** Activate objects at level 18
*** Activate objects at level 19
        Object Activation
End phase 001 ***********************************************************
Start phase 002 **********************************************************
        Final log
Following objects not activated/deleted or activated/deleted w. warning:
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
(W- Enhancement category for include or subtype missing )
Table ZAUTHCUST could not be activated
        Final log
End phase 002 ***********************************************************
Start phase 003 **********************************************************
        Statistics on Activated and Deleted Objects
Number of objects to be activated............: 2276
Objects not activated........................: 1
Activated objects with errors in dependencies: 1
Objects activated with warning...............: 1715
Successfully activated objects...............: 559
Number of objects to be deleted..............: 0
Objects not successfully deleted.............: 0
Successfully deleted objects.................: 0
Tables/views with DROP/CREATE................: 0
No. of them marked for DROP/CREATE: 0
Not marked for DROP/CREATE: 0
Number of nametabs to be deleted.............: 0
Successfully deleted nametabs................: 0
Nametabs that were not successfully deleted..: 0
        Statistics on Activated and Deleted Objects
End phase 003 ***********************************************************
=========================================================================
Mass Activation
=========================================================================
Process..................: mb4ba1025vs_12
Return code..............: 8
Phase 001..................: 00:00:41 (Object Activation)
Phase 002..................: 00:00:01 (Final log)
Phase 003..................: < 1 sec. (Statistics on Activated and ...)
Program runtime..........: 00:00:46
Date, time...............: 24.03.2014, 13:33:38
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20140324133339
Ended with return code: ===> 8 <===

Hi Mamta,
Refer to Troubleshooting section of below SAP note
1143352 - SAP Archiving/Document Access by Open Text Installation
Hope this helps.
Regards,
Deepak Kori

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1

Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Table DSWP_BPM_DMD_S_NOTIFCUST does not exist

Hi ,
When I use Solman 4.0 SPAM/SAINT to install the new ST-SER 700 2007 1, it came the error during phase DDIC_ACTIVATION, and I checked the log, it is like :
Table DSWP_BPM_DMD_S_NOTIFCUST does not exist.
please help me.

Generally, SYS's objects are not exported even with a FULL export.I was thinking that it may have had something to do with this but when I tried to create it as system then I tried to add it to the profile and it said that the function did not exist then. Then I created it as sys and it did find it (although not when doing an export). Would this have been because the password_verify_function has to be created by the sys user (pretty much every site I read about setting up a password_verify_function says to create it as the sys user) ? Or does it just have to be created in the system tablespace (my system user's default tablespace was 'users' at the time when I tried creating the function)?

Application object BUPA: Table TSADC does not exist

Hi All,
When I try to create a Business Partner in transaction fmcac1, I get the message Application object BUPA: Table TSADC does not exist, especially when I try to go back to the Address tab after clicking on any other tab on that screen. I have tried to add the table in trans BUSG but I don't know what I am supposed to assign as the FM, for example.
I have also used the trans BUSB to try to delete the entry for TSADC but it says 'do not make any changes (SAP Entry.)' Can u pliz assist with the information I have requsted above or prescribe another solution.
Thanx in advance.

For the benefit of others, I was able to solve the problem by removing the entry to the RIGHT, not the WHOLE entry (which refuses becoz it's an SAP entry). This is through transaction BUSB.

LOG BZA= table PATCHHIST does not exist on database

Dear Friends,
I am installing SAP R/3 4.7 using import method and in the last step of the installation RFC logon module (post procesing) getting the error FRF-00063 RFC logon failed with invalid interface.
below is the R3trans log
4 ETW000 Connected to DBMS = DB6 --- DB2DBDFT = 'TST' --- SYSTEM = 'SPP'.
4 ETW000 [dev trc     ,00000] { db_rtab( fcode = 'RT_INSERT', tname = 'PATCHHIST' ) {saprel.c:1350}
4 ETW000                                                                             163 0.755328
4 ETW000 [dev trc     ,00000] *** ERROR in prepareStatement[dbdb6.c, 12112] CON = 0 (BEGIN)
4 ETW000                                                                            1743 0.757071
4 ETW000 [dev trc     ,00000] &+     DbSlModifyDB6( SQLExtendedPrepare ): [IBM][CLI Driver][DB2/AIX64] SQL0204N "SAPTST.PATC
HHIST" is an undefined nam
4 ETW000                                                                              32 0.757103
4 ETW000 [dev trc     ,00000] &+     e. SQLSTATE=42704
4 ETW000                                                                              19 0.757122
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              19 0.757141
4 ETW000 [dev trc     ,00000] &+     INSERT INTO "PATCHHIST" ( "EXECUTABLE", "SAPRELEASE", "HOSTNAME", "PLATFORM", "DBVENDOR"
, "TIMESTAMP", "PATCHNO",
4 ETW000                                                                              20 0.757161
4 ETW000 [dev trc     ,00000] &+     "DBSLPATCHN" ) VALUES( ?, ?, ?, ?, ?, ?, ?, ? )
4 ETW000                                                                              29 0.757190
4 ETW000 [dev trc     ,00000] &+       cursor type=NO_HOLD, isolation=UR, cc_release=NO, optlevel=5, degree=1, op_type=15, re
opt=0
4 ETW000                                                                              33 0.757223
4 ETW000 [dev trc     ,00000] &+       ABAP location info: '', 0
4 ETW000                                                                              30 0.757253
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              19 0.757272
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              19 0.757291
4 ETW000 [dev trc     ,00000] *** ERROR in prepareStatement[dbdb6.c, 12112] (END)
4 ETW000                                                                              28 0.757319
4 ETW000 [dbtrtab     ,03967] ***LOG BZA=>table PATCHHIST does not exist on database [dbtrtab#5 @ 3967]
4 ETW000                                                                              38 0.757357
Kindly help me in resolving the issue.
Thanks and Regards,
Seshu

Hello Seshu,
the table should be there, so maybe there was an earlier problem durint the installation.
Go to the directory containing the installation logs and search for errors, e.g.
grep -i PATCHHIST *.log
Regards,
Mark

Sintax error in COPA- Table T2580 does not exist or is not active

hi to all
i am doing configuration for T.C KES1 in CO-PA
while doing this i am getting SINTAX ERROR saying that T2580 DOES NOT EXIST OR IS NOT ACTIVE.
I checked with standard program this table is used by standard SAP PROGRAM
programe name SAPL0KEA
but this table contain no data
could please some help on this
v v urgent

Hi Hari,
This is a know issue in CO-PA. You need to apply three notes and the issue will be resolved.
Please run report RKEAGENV as described in the attached 64490.
If running report RKEAGENV will cause another error concerning operating concern E_B1 please copy the report ZJBREOFC from the correction in-
structions in the attached note 872175, activate and execute it.
If after applying note 872175 you receive a new short dump, please
execute report RKEAGENF to eliminate the error so that the program
RKEAGENV could then be executed without error and thus the characteris-
tic maintenance should work again.
Please also implement note 942785 into your system.
Regards,
Abhisek.

Table ZCHECKPICK does not exist in the database

Hi!
   I have a table "ZCHECKPICK" no "MANDT - Client".
   Then I inserted a field "MANDT - Client" and executed SE14 to "Active and adjust database".
    The table is now "does not exist in the database" but the struture is ok.
What do i do to get the table in DataBase again?
<Priority normalized in subject line>
Edited by: Vinod Kumar on Sep 13, 2011 9:32 AM

Dear Clayton,
you can try a few things
1) generate/activate the table prior to call SE14.
2) after confirming that the table is well generated, go to SE14 and choose "Delete Database Table"
3) then, still on SE14, click on "Activate and Adjust database"
[http://imageshack.us/photo/my-images/607/20110913010743.jpg/]
That should fix it.
Kind Regards
/Ricardo Quintas

Dump error: Dynpro does not exist while in transaction me31L / me31k /ME41

Hi Experts
I am experiencing dump while attempting to create Schedule agreement/contract.
Error analysis
The system attempted to use dynpro 0201 in program "SAPLXM06".
This dynpro does not exist.
Trigger Location of Runtime Error
Program SAPLX06
Include MM06EO0C_CUSTSCR1_HEAD_SET_DAT
Row 10
Module type (MODULE PBO)
Module Name EXIT_SAPLEINM_013
Please suggest the correction
Reagrds,
Ankush Shinde

Hi,
This looks like some one is playing around with screen exits. Open the FM EXIT_SAPLEINM_013 in se37. Double click on include
ZXM06U35 and check the status of this include. I hope this is in Inactive status because of some syntax error.
If above is correct, then check and correct the syntax errors.
Also can you see what is the main program SAPLXM06 status. If not active, try to activate it in SE80.
Thanks,
Vinod.

Dump error: Dynpro does not exist while in transaction me41 / me31k

Hi Experts
I am experiencing dump while attempting to create rfq/contract.
Error analysis
    The system attempted to use dynpro 0301 in program "SAPLXM06".
    This dynpro does not exist.
Trigger Location of Runtime Error
    Program                                 SAPMM06E
    Include                                 MM06EO0C_CUSTSCR1_HEAD_SET_DAT
    Row                                     10
    Module type                             (MODULE PBO)
    Module Name                             CUSTSCR1_HEAD_SET_DATA
Please suggest the correction
warm regards
marias

Hi, Dhananjaya Raj,,
I am facing same issue with same ABAP dump and error ? How you resolve it ?
please share your footprint. thanks in advance ...

LCA03 dump - table MATRIXINDEXTAB does not exist

Similar Messages

Maybe you are looking for