LCCS Screenshare-How to view the shared screen?

Hi all,
Im new to LCCS,doing lccs screen sharing application using Flash Builder 4.I have used session.streamManager.maxP2PStreamPublish = 20; session.streamManager.streamMulticast = true to publish my screen,How can i view the shared screen from another system?Do i need to use the subscriber in another system to view the shared screen?Can anyone plz help me...
.Thanks in Advance
Duva

Hi Duva,
Have you tried using the Screen Sharing SampleApps? You can download them from our SDK Navigator. Within the "ScreenShareExample" folder has "ScreenSharePublisherExample.mxml" and "ScreenShareSubscriberExample.mxml" which I think might help
Here is the info from the Readme about these examples:
ScreenSharePublisherExample:This example shows how to publish one's screen and share with other subscribers in the same room who has its publisherID. When invoke this publisher, Adobe Screen Share Addin will appear and a sharing dialog will pop up for asking which application/view to share. Upon confirmation,
both streamID and publisherID will be displayed on the center textfields. Use the publisherID on the screenshare subscriber to see the screenshare. (Please verify account information and roomURL before using the publisher)
ScreenShareSubscriberExample:With right account information and roomURL, this application will connect to the first screen share publisher in the room (you don't need to specify the publisherID).
Here are some good pages with ScreenSharing info that you might find helpful as well:
http://learn.adobe.com/wiki/display/lccs/08+Audio%2C+WebCam%2C+and+Screen+Sharing
http://learn.adobe.com/wiki/display/lccs/8.3+Screen+Sharing
JG
LCCS Quality Engineering

Similar Messages

How to implement the shared lock in a table view

Hi,
How to implement the shared lock in a table view.for multiple users to edit on this same table.
Thanks in advance
Swathi

Hi,
Please refer this link to find solution to your querry.
Hope it helps.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c322c690-0201-0010-fb86-811c52b0acc2.
Regards,
Rahul

How to view the source code for Native Method

hi
i am using some native methods in to my code ;
can anybody tell me how to view the source code for the same ;
nik

Buy/acquire a C/C++/assembly code disassembler and run the shared library through it.

How to reactivate the welcome screen of indesign?

how to reactivate the welcome screen of indesign?

Thanks, but it seems that there is no welcome screen in CC.
Jeronimo Nilson
Em 10/06/2014, à(s) 20:16, Fede Gianni <[email protected]> escreveu:
how to reactivate the welcome screen of indesign?
created by Fede Gianni in InDesign - View the full discussion
this is CS6, but maybe is still there
https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6448823-645751/Screenshot2014-06-10at18.15.08+.png
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6448823#6448823
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to view the DDL script prior to object deployment in OWB 10g R2?

How to view the DDL script prior to object deployment in OWB 10g R2?
Here is what I' looking for: in 10gR2, let's say I've built dimension X, but it's not deployed yet. I've selected one of the deployment options, let's say: "Deploy to Catalog only". Now, I'd like to see a DDL script that will be executed at the deployment time. Where can I find this script? What screen? What menu?
Thanks,
vr

Viewing the Scripts
After you have generated scripts for your target objects, you can open the scripts and
view the code. Warehouse Builder generates the following types of scripts:
■ DDL scripts: Creates or drops database objects.
■ SQL*Loader control files: Extracts and transports data from file sources.
■ ABAP scripts: Extracts and loads data from SAP systems.
To view the generated scripts:
1. From the Generation Results window, select an object in the navigation tree on the
left of the Generation Results dialog.
2. Select the Scripts tab on the right of this dialog.
The Scripts tab contains a list of the generated scripts for the object you selected.
3. Select a specific script and click the View Code button.
Regards,
Marcos

How to view the login log in window NPS after login cisco switch and without SQL server database

how to view the login log in window NPS after login cisco switch and without SQL server database
in summary
there is only log with event id 4400
A LDAP connection with domain controller XCPAWS20.cyberport.noc for domain NOC2 is established.

Hi adil,
For your issue, you can create a custom security token service (STS) and then set up a trust relationship between a SharePoint 2010 farm and the custom STS.
For more information, you can refer to the articles:
http://forums.asp.net/t/1335229.aspx?Sharing+Authentication+Ticket+Between+ASP+NET+and+Sharepoint
https://msdn.microsoft.com/en-us/library/office/ff955607(v=office.14).aspx
http://www.paraesthesia.com/archive/2011/02/01/working-with-windows-identity-foundation-in-asp-net-mvc.aspx/
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to View the Loaded Data

Hi,
I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
Thanks

Hi Madhu,
You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
Regards
Hemant

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to view the Users in the Portal Activity Report

Hello,
Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
Please explain me in detail how to view the Report.
Thnx in Advance
cheers,
Murali

hi,
You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
Do see the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
Weblog :Portal SP9: Portal Activity Report
Regards,
Ganesh N

How to View the Scheduler in ODI Console

Hi
In ODI Studio, we may Schedule a Scenario and also, we may view all Schedules process from the Agents (View Schedule option).
My colleagues are going to use ODI Console, but we cannot find out HOW to View the Schedule in ODI Console.
In Oracle documentation about FDMEE, we can read the following: If you want to cancel a specific instance of a schedule, use the ODI Studio or ODI Console... see the PDF document in attachment.
Regards
Claude

To display the schedule for one agent:
In Topology Navigator expand the Agents node in the Physical Architecture accordion.
Select the Physical Agent you want to update the schedule.
Right-click and select View Schedule.
The Schedule Editor appears, displaying the schedule for this agent.
Check: http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/running_executions.htm#ODIDG634
HTH -
Jasmine

HOw to view the records in a structure qaqee ?

hi every one ,
we can view the tble through SE16
HOw to view the records in a structure qaqee ?
Thanks in advance

Hello,
Please check the link
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/90/8d7301b1af11d194f600a0c929b3c3/content.htm
You can view the struture in SE11 t-code for its components.
Regards,
Shailesh

Error while viewing the shared report

Hi
After sharing a worksheet to another user and try to view the report from the other user, it displays the following error:
" A measure is missing or is invalid.
This worksheet may not display data correctly. Please edit this worksheet using OracleBI Discoverer Plus for OLAP to correct the problem. "
whereas when i log in as the person who created the worksheet, im able to view the report perfectly..
I tried to save the worksheet's dimension and shared that one too..
but cud'nt see the shared report.
The error occurs only when the other user tries to view the shared report and the same report work fines when the owner of the report views it.
Please help us out on this issue.
Thanks
S. Kokila

Hi,
Have you made sure that the user you're trying to view the report as has select access on the underlying AW?
You can grant select on the underlying AW by logging in as it's owner and then:
grant select on AW$<awname>
where <awname> is the name of your AW.
Hope this helps.
Mark..

How to fill the whole screen of my iMac with the photos included in an iDVD project. (iDVD v. 7.1.2)

How to fill the whole screen of my iMac with the photos I included in an iDVD project. (iDVD v. 7.1.2). I mean, during playing the burned dvd.
When I do "Enter Full Screen", the slide show fills the screen but the photo itself remains in the middle with a wide black border filling the rest.
Any cure for this ?

Hi
In iDVD Preferences - Turn off - TV-Safe area - and the Photos will fill the full area with just letterboxing or pillars as max.
Then "Save as a DiskImage" and test this and see if this plays better - before burning DVDs that's not as You want them.
Bengt W

How to Get the Debugger Screen in WEB Front end of SRM

Hi Gurus,
I have couple of questions for SRM.
1. How to Get the Debugger Screen in WEB Front end of SRM so i can debug the application which is running in EBP system??
2. How to set the flag for external debugging (HTTP)??
3. Using SICF how to set the ITS services ( Like BBPSC01 )for internal ITS so as soon as i place the order it should stop at the break point which i have set in the application.
Thanks.
Regards,
Manoj Tiwari

Setting up Debugging for Integrated ITS
Tcode SICF.
Select service (e.g. default_hostàbcàguiàsapàitsàbbpsc01).
Change service settings and insert parameter ~GENERATEDYNDPRO=1.
Find program to debug. E.g. SE93. Enter bbpsc01 à Display and get Program field (SAPLBBP_SC_UI_ITS)
Execute SE38 and enter program name.
Turn HTTP Debugging ON. UtilitiesàSettingsàDebugging. Click Actv and username.
Add HTTP Breakpoint. Display source code and select Utilitiesàbreakpointsàset.
On External Debugging select HTTP Breakpoint.
Remember to remove breakpoints, deactivate debugging and remove parameter GENERATEDYNPRO.
Can run program RSBREAKPOINTS to find which programs you have breakpoints set in.
Have fun with EBP
If you have any more questions i would be happy to help you. Send me mail on [email protected]

How to Modify the Selection Screen in Report Painter

Hi All,
I am working on Report painter and writer,
can any body helpme how to change the selection screen i.e i want add some more select options to the exisiting roport .
how can i add more select options to the exisiting one
please let me know the Procedure and provide some relevent documents .
Thanks and Best regards.
uma

Hello...
In the program ...we can find the following chunk of code..
selection-screen:begin of block B1 with frame title text-001.
Parameters : ....
select-options:.....
selection-screen:end of block b1.
if we need to add any more user inputs we can write the code inside the existing
selection screen....end of block .
or create a new block ..just the block name should be different...
if we are using select options...we need to declare the table name using the key word for the field on which we are giving select options ....
Tables : BSIK.
Please see the following code:
Imagine :- we have the current selection screen..
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR.
SELECTION-SCREEN END OF BLOCK B1.
we need to add 2 more fields on the selection screen ..this we can do as the following
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR,
                S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE BSIK-BUDAT OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B1.
OR...create a new block...
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:   S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE RFPDO-ALLGSTID OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B2.
there are many options available in selection screens..like creating check box,radio button etc..
for more info press F1 help on the Selection screen in the ABAP editor
Revert back if not clear and reward if helpful
Regards
Byju

LCCS Screenshare-How to view the shared screen?

Similar Messages

Maybe you are looking for