Lcd blank and red blink one times pause then blinking 4 times

can someone tell me what my problem and can fixed it? my blackbery q10 red blinking one times pause then blink 4 times again and again.. its problem with ic cpu? or ic power? thank

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • VFX3 ERROR:Enter a Name and City for one-time account postings (F5 266)

    Dear Colleagues.
    Finance are teying to release a billing doc to Finance on VFX3 and getting the error below.Is it something not maintained correctly somewhere (Customer Master,etc)?
    All help greatly appreciated,
    PAPJ1
    Error Log
                 0010056707 000000 Document 0010056707 saved (no accounting document generated)
                 0010056707 000000 Enter a name and city for one-time account postings
                Technical data
                    Tech. data details
                     Client
                     Group Number
                     Sales Document Number                  0010056707
                     Item Number of the SD Document         000000
                     Schedule Line Number                   0266
                     Counter in Control Tables              00
                     Message Identification                 F5
                     System Message Number                  266
                     Output Type                            E
                     Message Variable 01
                     Message Variable 02
                     Message Variable 03
                     Message Variable 04
                     Group Type

    Hi.
    The system logic is the following:
    In the master record of your one-time account, there is a field called
    'Reference account group'. The field status settings of the account
    group entered here are relevant for the one time vendor screen.
    Please note that even if the fields are changed from mandatory to
    optional if the NAME and CITY of the One Time Vendor is not filled, the
    system will still prompt the Error Message F5266.
    If you do not enter the name and city you will receive error F5266.
    The system logic here is to make sure that the name and the city being
    keyed-in properly for the Executive Information System reportings.
    Please note that it is hard-coded in the system.
    Check the following notes
    604312
    587806
    548834
    513748
    512360
    Also if you are using any bapi to post the document, you can  resolve the issue pass-in 'Name', City and Region field values in BAPI while creating the billing document.
    I hope I could be of assistance.
    Kind Regards,
    Fernando Evangelista

  • Enter a name and city for one-time account posting is the message i get

    Enter a name and city for one-time account posting is the message i get ,when i am trying to post a onetime vendor .I have entered name ,country and language when the pop comes.But still throws me this message ,pls help.

    Hi,
    I didnt understand what u mean by "when i am trying to post a onetime vendor".
    Pl. specify whether you are:
    -Creating a OTV
    -Creating a PO for a OTV
    or
    doing any other transaction
    Regards,
    Prithviraj

  • Can I change more than one photo from color to black and white at one time?

    can I change more than one photo from color to black and white at one time?

    Check out iPhoto Batch Enhancer
    http://www.feroxsoft.com/ibe/index.php.en
    Regards
    TD

  • How do I get an object to rotate as it moves up and down or left and right from one time key to the next ?

    how do I get an object to rotate as it moves up and down or left and right from one time key to the next ?

    I'm partial to this series:
    After Effects basics tutorials by Andrew Devis
    The subject matter is very clearly-defined by topic.
    And AE shouldn't up & quit on you... but you haven't breathed a word about your system or your AE version.  Please share.

  • I do not own an adobe product and want a one-time payment licence for students and teachers, what should I get?

    I do not own an adobe product and want a one-time payment licence for students and teachers, what should I get? There are so many licenses to choose from and at least 3 lightroom licenses for students.

    If all you are looking for is Lightroom, I would suggest going to your campus computer store. The computer store where I worked had Lightroom in stock. If your store doesn't have it in stock they can order it for you. There is really only one Lightroom 5 license that comes with the standalone version, student or otherwise. The program is identical either way. Licensing for the creative cloud is handled through the web and the payment method, But you aren't concerned about that.

  • Is there a way to email all texts made between someone and myself at one time?

    It's a pain to email one text at a time. Is there a way to do all of them at once? Thanks 

    I don't see a way on my ENV3 other than one at a time but I wonder if smart phones are capable of this.  Mary

  • Pearl 8100 Screen goes blank and Red flashing LED then will not respond.

    Hi,
    This is my first post here (however I'm on other forums as well) I wanted to see if anyone has come across this. 
    Briefly here is the low down...
    * We have BES 4.1.038 (will be updating soon to 4.5 or 5)
    * Platform Version is 2.7.0.66
    * Blackberry Version is 4.5.0.52
    It's also showing on the BES as having communicated with the unit within the last 10 mins.
    any ideas?
    Paul Croker

    Hello Paul_Poker and welcome to the forums!,
    I think in your situation you should look into reloading the software on the device. Just make sure you back up your data before proceeding so you can have a copy of it. Of course the application loader will take of this for you by default. 
    1)  Here is how you back up your device. 
    2)  Here is how you reload the software cleanly on the device (Alternatively, Here is an article on how to use the Web-Based software loader) 
    3)  Here is how you restore your data to the device if it is not backed up automatically
    -tg
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Name and city not defined in FB60 for one time account

    Hello Guru's ,
    We are on SAP ECC 6.0 and I have defined a one time vendor in the standard account group CPD One-time vend.(int.no.assgnmt).
    In the screen layout for that account group I have the address details for name1 and postal code, city defined as optional entry. In the master data of the one time vendor I have however created an address so the address details like Name1 and City are filled.
    When I use MIRO for creating an invoice the address details are filled for the one time vendor, but when I use FB60 it prompts the following message: 'Enter a name and city for one time postings'.
    Why are the address details not filled in transaction FB60 while the have been filled in MIRO ? And why can I not post the Invoice as I have defined the name and address as optional entry in OBD3 ?
    Thanks as ever for your reply's

    Yes I understand that. The problem is however that we have invoice scanning and when the invoice is scanned it comes into the rework fase where we enter the one Time vendor. In a normal situation the invoice wille be created and parked (status completion) after which AP clerks can either enter a Purchase order or not. With the One Time vendor I don't get an invoice document as it prompting for the Name and City. Becaue of that I entered the name and city in the vendor master data and set them to optional in OBD3. Nonetheless it still gives me the error. Also in transaction FB60. So if it doesn't work with making fields optional in the vndor accoutn group and entering the requested data in the vendor master data I probably must set the error message some where into a waring ? Funny thing is that it does work for the MIRO transaction as I am not getting the error there.
    Thanks
    Edited by: Antoinette Stork on Jun 19, 2009 2:46 PM

  • Display One time customer list and its transactions

    Dear,
    When we use one time customer in sales order and invoice, we'll get an additional pop up window where we can input name and address of the one time customer.
    Where can i get the table they get stored?
    If i want to see the one time customer report as well as customer report in fbl5n, what t-code that i can use?
    Thank you

    Dear,
    I can see the one time customer list (added from additional pop up window) in BSEC...:)
    What do u mean with this statement :"Here you can add table BSEC and field XCPDK(One-time account), once you add this field in the table, the field will be displayed in the change layout option of FBL3N"
    Does it mean that i have to add "a field" in "the change layout option" when i run the transaction of FBL5N or FBL3N?
    What field is that? because i didn't find any field of "one time customer as displayed in BSEC"  in "the change layout option".
    Thank you...:)

  • Screen is blank and won't connect to computer

    My 120gb Ipod classic screen went blank during play back of a song when i was trying to skip back to the start of the track. The screen remained blank and all controls (ie. menu, pause etc) did nothing. The song played to the end then; nothing. The battery should have been full as i had previously been playing it on a dock which charges it, then when I connected it to my mac book it didn't appear in itunes or on the desktop. I left it for about 4 hours to see if charging it would help but still nothing.
    Any suggestions?

    Have you tried to Reset the iPod -
    Toggle the HOLD switch, make sure you don't see any red at the switch.
    Press Menu and Center button for about 10 secs till the Apple logo comes ON, then select your prefered language.
    If you are on Mac, then the problem is not iPod resource hogging by the Antivirus.
    Yours is most probably hardware due to a dying iPod Hardisk or Battery.
    Battery
    On standalone, (not using the iPod docking station)  how long does the battrey last? Should be 36 hours on full charge, when new, but if it has been on the Docking station for 2 years, the battery would be at its max recharge cycle, and would last a few hours only or less.
    Hardisk
    Here is a link on doing disk diagnostic posted by tt2.
    https://discussions.apple.com/thread/2362776?start=0&tstart=0
    For hardware issues like battery or hardisk, the community can't help you, so you got to bring it in to Apple or 3rd Party vendor for hardware replacement.
    Have a nice day!

  • FI doc post (IDoc FIDCCP02 - One Time Vendor entry)

    I am posting an FI document and entering a one time vendor. In segment E1FISEG, field HKONT I enter 'ONETIME' (one time vendor). In segment E1FISEC, I enter the one time vendor info. When I create the IDoc, I get error 'No account specified in item 0000000001'. Any idea where this account comes from? It works fine when I create an FI doc with a one time vendor using trans FB01 manually.

    Hi Ray,
    what's about struc. E1FINBU
    and field E1FINBU-LIFNR ?
    i think you do'nt fill E1FISEG-HKONT for vendor-line!
    regards Andreas

  • One Time Vendor in F110

    Hi,
    1) In PO, under address tab, we entered a generic name and address for one time vendor.
    2) In IV (MIRO), we create multiple invoices for the PO under different payees by changing the one-time vendor's name and address.
    3) In payment (F110), we create proposal for the one-time vendor. In proposal list, each invoice generates a different payment number, however they are all lumped under the generic name we entered during PO under "payment to" field. After payment run, the payment list appears the same as the proposal list. The cheques printed show the correct payee entered during MIRO though.
    Anybody knows how I can get the proposal list and payment list to reflect correctly?
    Thanks.
    Edited by: newbird on Nov 1, 2010 10:01 AM

    Hi,
    Do you able to find a solution for your requirement.
    My business need is also similar to your. If you have got a workaround,can you kindly share it.
    Regards,

  • One time customer settings

    hi ,
    Can any body please tell me how to design the settings in case of one time settings in both vendors or customer point of u?

    Hello
    Create a customer or a vendor in respective sub modules and choose only "One Time Customer/vendor" as the account group.
    Do not choose any other group, this is because they have some restrictions in fields and transactions.
    Rest all is same and proceed with the maintenance of master data.
    Reg
    assign points if useful
    Please go through the below text:
    One time customer / vendor accounts in SAP means they are account groups for customer/vendor and where in only the general data of the customer / vendor are stored instead of maintaining the bank data and other company code data that are relevant for other account groups which are useful for long run purposes.
    As you know everything that is entered in SAP is saved in some TABLE.  Now the customer & vendor master is such a table which holds vast amount of data.
    The business secenario where the vendor or customer which are being in system only for 1 transaction, it is not advisable to have all the data maintained in main master.
    Therefore SAP has provided with the feature of One time vendor / customer wherein in the document entry stage only you have to enter the name, addres and other details of the vendor/customer.
    The data, as far as I know' remains at doc level and does not goes to master tables.
    One time vendors are those who are not frequent vendors. Company will be using those vendors very rarely, maybe once in a life time.  SAP is giving a special category for those type of vendors. Normal vendors will have separate Master Data which will have their address, country, bank account, terms of payment, payment methods, etc. 
    Whereas there will not be such records kept in Master data for those one time vendors. This way you will reduce the data base size. There will be one vendor master record named as one time vendors and will have the check box ticked while creating this record. Country field is mandatory when creating a normal vendor master (sap standard) whereas it will not be in case of one time vendor. 
    When you post a document to this vendor (One time vendor), it will prompt you to fill the name address and all the required fields at the document level. 
    Reg

  • Can you give me a paper or document related to this phone was changed since it was broken down? I need IMEI numbers of two Iphones on the same page. Because I don't wanna save this Iphone again in my country. I paid one time for my old Iphone.

    My Iphone was changed because of broken down thanks to its warranty. I am from Turkey and I paid one time for my old Iphone to save. Can you give me a paper or document related to this phone was changed since it was broken down? I need IMEI numbers of two Iphones on the same page. Because I don't wanna save this Iphone again in my country. I paid one time for my old Iphone. If you give me a document, I don't need to save my Iphone5 and also I don't need to pay again to save in my country.

    this forum is made up of users like you, not apple employees.  We can not help you with that kind of request.

Maybe you are looking for

  • Help with timing, input from Daq, output sound

    Hi I am a student member of OSA, working on a laser listener project to be used in examples for high schools students. It is a pretty old and simple experiment but something I think students would be into. {any suggestions for other experiments anyon

  • Conforming to 29.97 NON DROP

    hey all! I have a movie that is 29.97 DF that I would like to conform to 29.97 NDF before I bring it into FCP. how do I do this? thx!

  • Change of Unit Of Measure

    Hi, İ have a material created in more than 20 plants two months ago. Since then, many material documents has been created and there is a considerable amount of stock both in the previous and current periods. To change the UOM, *i have to complete / m

  • Upgrading from PSE 3 to 5

    I basically use PSE for scrapbooking and photo editing...I really don't use the organizer. Can someone tell me the differences between the upgrades?

  • Aperture too much for an amateur?

    Is Aperture too much program for an amateur? I have used Photoshop Elements and Photoshop CS2(still learning)on a Windows machine. I hear really good things about Aperture such as ease of use and not to bad of a learning curve. In trying to break awa