LCD brightness went down after the repair...

So I was having several issues with the LCD of my new Macbook pro (dead pixels, marks on the screen, uneven tones, backlighting issues, etc...), and Apple replaced the LCD screen for me. But now the brightness has gone down quite a bit. At least 2-3 notches down from the old screen. It is quite noticeable especially if I compare it with my friend's MacBook pro side by side. Maybe I thought Apple changed the manufacturer of LCD or something, but I've been told no by their tech support. Does anyone heard or experienced anything similar? Thanks...
Macbook Pro 1.83GHZ Mac OS X (10.4.5)

egghead:
A little off the subject, but since you had the entire LCD replaced, I just had a quick questions, does your replaced LCD make any noise what so ever? Does it sound exactly the same from the highest all the way to off or is different hissing as you go lower. I would appreciate it if you could let me know. Much appreciated. Your situation ***** and I guess I shouldn't feel so bad about mine - I got my logic board replaced and I still have both whines.

Similar Messages

TS1538 iphone5 went in recovery mode after replacing power button, everything went well in the repair ,try to restore but it quit in the middle of the process

iphone5 went in recovery mode after replacing power button, everything went well in the repair ,I try to restore but it quits in the middle of the process and go back to i tunes logo please help I been without my phone for a week.

Hi
did you get any reply?
I have the same problem I dont know what to do..
Regards

My Game Center went away after the last back-up. How do I get it back?

My Game Center went away after the last back-up. How do I get it back?

It's on your iPad somewhere. It cannot be deleted.
Swipe from screen to screen to look for it.
You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
Settings>General>Reset>Reset Home Screen Layout.

Disp+work process was down after the Restoreing the backup

Disp+work process is down after the Restore of the backup
s/m configration: windows 2003 server + oracle 10g
The below is the log file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid PRA
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 52
intno 20050900
make: multithreaded, Unicode, optimized
pid 2928
Thu Apr 07 18:58:10 2011
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2928) [dpxxdisp.c 1231]
 shared lib "dw_xml.dll" version 52 successfully loaded
 shared lib "dw_xtc.dll" version 52 successfully loaded
 shared lib "dw_stl.dll" version 52 successfully loaded
 shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Thu Apr 07 18:58:15 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >pwsap_PRA_01 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3954072 (19672)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1452)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05C00040, size: 4613144)
DpShMCreate: allocated sys_adm at 05C00040
DpShMCreate: allocated wp_adm at 05C01E28
DpShMCreate: allocated tm_adm_list at 05C065A8
DpShMCreate: allocated tm_adm at 05C065D8
DpShMCreate: allocated wp_ca_adm at 05FCBB70
DpShMCreate: allocated appc_ca_adm at 05FD1930
DpShMCreate: allocated comm_adm at 05FD3870
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06054730
DpShMCreate: allocated gw_adm at 06054770
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 060547A0
DpShMCreate: allocated wall_adm at 060547A8
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Thu Apr 07 18:58:16 2011
J2EE server info
start = TRUE
state = STARTED
pid = 3208
argv[0] = D:\usr\sap\PRA\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PRA\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PRA\SYS\profile\PRA_DVEBMGS01_pwsap
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1069
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PRA
argv[7] = -DSAPMYNAME=pwsap_PRA_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PRA\SYS\profile\PRA_DVEBMGS01_pwsap
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]
***LOG Q0K=> DpMsAttach, mscon ( pwsap) [dpxxdisp.c 11414]
DpStartStopMsg: send start message (myname is >pwsap_PRA_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Thu Apr 07 18:58:17 2011
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Thu Apr 07 18:58:42 2011
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1472
 (SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1085) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3208)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Apr 07 18:58:56 2011
ERROR => W0 (pid 3216) died [dpxxdisp.c 14021]
ERROR => W1 (pid 3224) died [dpxxdisp.c 14021]
ERROR => W2 (pid 3232) died [dpxxdisp.c 14021]
ERROR => W3 (pid 3240) died [dpxxdisp.c 14021]
ERROR => W4 (pid 3248) died [dpxxdisp.c 14021]
ERROR => W5 (pid 3256) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 3264) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 3272) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3280) died [dpxxdisp.c 14021]
ERROR => W9 (pid 3288) died [dpxxdisp.c 14021]
ERROR => W10 (pid 3296) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 3304) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 3312) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 07 18:59:06 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Apr 08 01:59:06 2011
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3216 Ended no 1 0 0
1 DIA 3224 Ended no 1 0 0
2 DIA 3232 Ended no 1 0 0
3 DIA 3240 Ended no 1 0 0
4 DIA 3248 Ended no 1 0 0
5 DIA 3256 Ended no 1 0 0
6 UPD 3264 Ended no 1 0 0
7 ENQ 3272 Ended no 1 0 0
8 BTC 3280 Ended no 1 0 0
9 BTC 3288 Ended no 1 0 0
10 BTC 3296 Ended no 1 0 0
11 SPO 3304 Ended no 1 0 0
12 UP2 3312 Ended no 1 0 0
Dispatcher Queue Statistics Fri Apr 08 01:59:06 2011
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Fri Apr 08 01:59:06 2011
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Apr 08 01:59:06 2011
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 07 18:59:11 2011
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >pwsap_PRA_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED

trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Apr 07 18:58:16 2011
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno 01
M sid PRA
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 52
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3216
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3216) [dpxxdisp.c 1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3954072 (19672)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1452)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05C00040, size: 4613144)
M DpShMCreate: allocated sys_adm at 05C00040
M DpShMCreate: allocated wp_adm at 05C01E28
M DpShMCreate: allocated tm_adm_list at 05C065A8
M DpShMCreate: allocated tm_adm at 05C065D8
M DpShMCreate: allocated wp_ca_adm at 05FCBB70
M DpShMCreate: allocated appc_ca_adm at 05FD1930
M DpShMCreate: allocated comm_adm at 05FD3870
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06054730
M DpShMCreate: allocated gw_adm at 06054770
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060547A0
M DpShMCreate: allocated wall_adm at 060547A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Apr 07 18:58:17 2011
M ThInit: running on host pwsap
M
M Thu Apr 07 18:58:18 2011
M calling db_connect ...
C Prepending D:\usr\sap\PRA\DVEBMGS01\exe to Path.
C
C Thu Apr 07 18:58:27 2011
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@PRA on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Attaching to DB Server PRA (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C
C Thu Apr 07 18:58:28 2011
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4345]
C Detaching from DB Server (con_hdl=0,svchp=061A3EC8,srvhp=061B5794)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10704]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@PRA on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Attaching to DB Server PRA (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4345]
C Detaching from DB Server (con_hdl=0,svchp=061A3EC8,srvhp=061B5794)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10704]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1403]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10019]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *
M * LOCATION SAP-Server pwsap_PRA_01 on host pwsap (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Apr 07 18:58:28 2011
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10204
M * COUNTER 1
M *
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3216) [dpnttool.c 327]

Just updated my 4S to iOS 6 - it shut down after the instait showed a "connect to iTunes" icon.

Just updated my 3GS to iOS 6 - it shut down after the install - then it showed a "connect to iTunes" icon.
iTunes said the phone was in recovery mode & needed to be restored. Clicked "restore" in iTunes & get "iTunes is restoring the software on this iPhone" - didnt work - came back to showing the "connect to iTunes" icon.
Have repeated the process twice now - same result - "connect to iTunes" icon displayed on the phone & iTunes says the phone is still in recovery mode

See Here > http://support.apple.com/kb/HT1808
Be sure to Follow ALL the Steps.
Some Users have reported that as many as 8 or 9 attempts were necessary Before success.

Hi my desktop starts and then shuts down after the apple logo and an oblong box appear.thanks

hi my mac
desktop starts then shuts down after displaying the apple logo and an oblong box.
thanks

Sounds like something is badly wrong with your system. First step would be to start up from your Mac OS X install disk, by inserting the disk and holding down 'c' at startup. Select your language, then choose Disk Utility from the Utilities menu. In Disk Utility, choose your hard drive and click the Repair Disk button.
If problems are repaired, try restarting and see if the problems are gone.
If problems couldn't be repaired, you can try DiskWarrior, which can sometimes repair problems that Disk Utility cannot. However, if nothing works, you probably are going to have to erase the hard drive and reinstall the system from scratch. Hopefully you have backups!
If there were no errors, or they were repaired successfully but that didn't fix the problem, then you should try booting into safe mode by holding down the shift key at startup. If that works, you may have some bad third-party software. What that might be is hard to say, though.
If nothing works, try rebooting from the Mac OS X install disk again and install Snow Leopard right on top of your current system. That shouldn't disturb your apps or data, but of course, if you don't have backups, you're in trouble if something goes wrong.

Speaker Audio Quality Went Down after Upgrading Device Software

Hello Everyone
I recently upgraded mine Blackberry 8830 from Os Version 4.2 to 4.5. I had to do it as i was not able
to utilize the complete features of this smartphone
One big thing i noticed though is , after upgradation the audio quality went down by almost 20%
Initially when mine phone used to play songs , it would be amazing to listen to that being quite
different from all other Mobile Phones. But after the upgrade , the audio quality declined.
I tried all options , using audioboost and everything else, but not able to listen to same quality till now
Can someone please help , may be i am missing out something here?
Thanks
Amit

Hey axsuri,
Once you completed the upgrade did you restore a backup file? If you did then try doing this, backup the device again. Once you have a new backup preform a reset to factory as shown in this article http://bbry.lv/a0QXmX after this is completed transfer a music file to the device and test to see if you are still having the same issue. If the issue is resolved then use this article to only restore essential data. http://bit.ly/bSbfl3
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

HT203254 were you able to get the faulty VGA chip replaced after the repair extension program expired? how have you achieved it?

i am currently in europe. my MBP17" was manufactured after may 2007 and was in service both in the US and europe between April 2008 and Dec 2010 three times in total, while still under warranty. none of these times was the motherboard exchanged for one with a non-recalled VGA GeForce8600GT chip.
now the chip died and the computer no longer loads. Apple authorised service provider says they are not able to even order these parts for me any more as the machine is in vintage status. apple claims to no longer stock them. apple support line claims they're very sorry, but they cannot help as the repair extension program is over.
non-authorised cervice centers would happily service it for more than $300.
what shall i do here, as investing another $300 here makes no sense, please help?

i am currently in europe. my MBP17" was manufactured after may 2007 and was in service both in the US and europe between April 2008 and Dec 2010 three times in total, while still under warranty. none of these times was the motherboard exchanged for one with a non-recalled VGA GeForce8600GT chip.
now the chip died and the computer no longer loads. Apple authorised service provider says they are not able to even order these parts for me any more as the machine is in vintage status. apple claims to no longer stock them. apple support line claims they're very sorry, but they cannot help as the repair extension program is over.
non-authorised cervice centers would happily service it for more than $300.
what shall i do here, as investing another $300 here makes no sense, please help?

Why does my MacBook Air's shutting down slow down after the recent update?

After the newly update OS X Update 10.9.4, the shut down of my MacBook Air slows down. It will stay several seconds more than before the update. This happens every time I try to shut down my MacBook, please meet my problem.

A Safe Mode boot deletes some system caches that may help.
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.
Once your Mac has booted to the desktop, click Shut Down from the Apple () menu to test.

If you get a repair what is the warranty after the repair

is it 90 days?
i'm repairing the logic board on my macbook pro, since the display flickers when I try and use it. also the cost to repair the logic board is around $300 correct?

I believe 90 days parts and labor. This is unless the repair is being done on a warranty extension from Apple, then I'm not sure. Ask at the store.

Every time I close down after the days use when I open it again the main page is corrupt and I have to re-install the firefox again can I stop this happening

When I open firefox first thing it opens but the home page is not working. So I have to re-install it. Then it is ok for the rest of the day but only to go down again the following day. What can I do to stop this happening? I use bt.com home page.

1. Reset the Internet Browser settings. Taking the Internet Explorer for example.
1). Close allInternet ExplorerandWindowsExplorer windows that are currently open. Open Internet Explorer by clicking theStartbutton. In the search box, typeInternet Explorer, and then, in the list of results, click Internet Explorer. Click theToolsbutton, and then click Internet options.
2). Click the Advanced tab, and then click Reset. Select the Delete personal settingscheck box if you would also like to remove browsing history, search providers, Accelerators, home pages, Tracking Protection, andActive X Filtering data.
3). In theResetInternet ExplorerSettings dialog box, clickReset. When Internet Explorer finishes applying default settings, click Close, and then click OK.
4). CloseInternet Explorer.Your changes will take effect the next time you openInternet Explorer.
2. Reset homepage as bt.com again.
3. clear out all cokkies and browsing history.

My Camera icons are upside down after the update anyone else getting this ??

MY camera icons are upside down since the update HELP!!!!

Do one by one and test.
Restart / Reset
http://support.apple.com/kb/HT1430

My text tone went away after the update but there is a catch.

I went to buy the tone again and it had said I already bought it but I had to buy it again. What is up with that!?

You get only one download of tones. Sorry.
Did you fail to backup your iPhone before updating?
You should store everything on your computer.

System went down after this message Client is not known to the mess server

Hi Guru's,
I am running 4.6c on Ora 8i, Windows 2000 Server. We have 1 application server. The central instance and DB is on same host.
Initially i got following error message 2 times in the system log reading:-
No free memory available in class PERM . Memory block ID "abtsv2", 958955044 bytes
After above message I got an information message Continuously 30 minutes in the system log reading:-
Client cinsapp1_PRI_00 is not known to the message serve
Then stoped the workproccess one by one
Stop Workproc 5, PID 4800
Stop Workproc13, PID 4468
Stop Workproc18, PID 4508
Stop Workproc11, PID 4452
Stop Workproc14, PID 4476
Stop Workproc12, PID 4460
Stop Workproc17, PID 4500
Stop Workproc24, PID 4560
Stop Workproc23, PID 4552
Stop Workproc25, PID 4576
Stop Workproc10, PID 4444
Stop Workproc16, PID 4492
Operating system call recv failed (error no. 10054)
Operating system call WSASend failed (error no. 10053)
Finally R/3 system was stoped.
Please let me know the process how to check the trace for this problem. If any body got same problem please suggest me how can i resolve this problem.
Thanks in advance,
Ramesh

Hi Experts,
How you fixed this issue, Please share with us.
because i am also facing the same problem in one of our SAP server.
Thanks & regards,
Pandiyan

I can't accessed system recovery options after the repairing process was interrupted.

although it's not my PC, i'm still concern about it (it's actually a public computer in our library). I actually tried to repair it using the system recovery options of windows 7 with thinkvantage technoliogies but i interrupt it because maybe someone will caught me and i will be mistakenly be liable. and the result is after i restared it, it restarts over and over again, with BSOD appearing for a split second. i tried to use disable autorestart on system failure feature, and i saw the BSOD. but the real issue is i can't go through the recovery options, only until the part when i'm asked to select a keyboard input method, then the next part is this message: "You must log in to access System Recovery Options. If you are having trouble logging in, please contact your computer administrator for assistance. Click OK to restart the computer." anyway, this is the BSOD says:
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Disable or uninstall any anti-virus disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical in formation:
*** STOP: 0x00000024 (0x00000000001904, 0xFFFFFA800690D840, 0XFFFFFFFFC0000102, 0x0000000000000000)
I hope this problem will be solved as much as possible. thank you in advance. and i also don't know what model of this Lenovo all-in-one PC is. but i think this is 3318F9U, and its i forgot its BIOS version, and i don't know how to access it. and also, i'm not sure if there's a preloaded Superfish in this all-in-one PC, maybe the vulnerability started it. because i recently read an article regarding the Superfish's vulnerability.

Hello and welcome,
Please remeber that this is a peer-to-peer forum (users helping each other) not the Lenovo support site. There is some Lenovo presence, but if you need urgent support, please try your local support office:
Philippines
THINK-branded products
Tagalog, English
1-800-8908-6454 (GLOBE subscribers), 1-800-1441-0719 (PLDT subscribers)
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

LCD brightness went down after the repair...

Similar Messages

Maybe you are looking for