LCD Calibaration and Printer Non-recognition

Hopefully, some of you who are printers can help me get my new LCD and HP wideformat printer speaking to each other. With my old CRT monitor, there was never a problem--beautiful colors every time.
I was encouraged to have the LCD calibrated for better color compatibility,and I installed "eye-one display 2". However, according to the HP tech, the "monitor is RGB and the jet printer is CMYK" and there can't be any coordination.
I can't accept that. The deskjet printer (HP Photosmart 830 0) is not printing for final production, but for proofs which supposedly give me some value indications of the graphics made in AI 10, which are then separated and given to the commercial printer. Granted, he'll work from the discs I give him, not the printouts from the deskjet.
There must be hundreds using LCD's now,and who also have installed color calibration of some kind, and hopefully, someone can enlighten me on how to get these two coordinated. The LCD looks clear, and bright, but the printouts are dull, grayed and light. This is extremely frustrating....thanks so much in advance.............mm

Well, the HP people don't know their stuff. Of course some level of calibration is possible, but it needs to be tackled on both ends. When you calibrate the monitor, you need to calibrate the printer, which with your equipment is not possible. You would need a different version of the eye-one that supports this. However, not all is lost. there are a few things you can do:
- print a reference sheet with pure colors (Red, Green,Blue, Cyan,Magenta,Yellow,Orange,greyscale Ramp etc.)
- turn off the printer's automatic color management
- dial in manual color percentages
Rinse-repeat the above steps until it looks halfway right. This by all means should also include any color profile settings in Illu. Another way to approach the problem would e.g. be to rasterize the output for proof printing in Photoshop and have a stack of adjustment layers do the calibration. Once you have a proper setting, you could always have this as a stock template. Lastly, of course the obvious solution is to request a calibration template from your print houses, print it on your hp and have them measure out a CMYK color profile on their colorimeters. You could then install these custom profiles on your machine as the print target.
Mylenium

Similar Messages

I updated HP Printer Driver yesterday. Although I can pring and scan, none of th ePrinter Utility fubctions work - it will not read my printer details, clean print heads etc

I updated HP Printer Driver yesterday. Although I can pring and scan, none of the Printer Utility fuctions work - it will not read my printer details, clean print heads etc

This has happened with previous HP updates, so I suggest you go to HP's site to see if there are other complaints/responses.

When I make a Book in Aperture and print a PDF proof version, all the modified photos (marked with Badges) are totally distorted. What is causing this? All other - non-modified photos - appear to be fine.

When I make a Book using Aperture 3 and print a PDF proof version, all images that have been modified within Aperture are distorted in PDF form. All other images appear ok.

As if only the corrected layer would have remained on the photos.
So the geometry of the pictures is correct - they are not skewed or something? Only the colors and intensities are wrong?
. Only in printing when it is converted to PDF file some photos are unrecognizable.
Is it the printed pdf or the pdf viewed on the screen? If it is the printed copy you need to fix your print settings.
Does Aperture give a warning, that the high resolution images are not available?
We had some cases of books not being able to be printed, and that was due to a broken reference to the original files. Only the book could not access the originals, all other parts of Aperture could. To check for this, try to add one more adjustment to one of the images in question. Is it possible? Are the edits reflected correctly in the pdf of the book?
We were shooting with 3 cameras, Lumix5 shooting RAW, Cannon 100 shooting JPEG and SONY alfa850 shooting RAW.
Have you tried to reprocess the raw of the edited images? (Photos > Reprocess Raw)
Also try, to remove one of the images from the book and to add it again. That usually helps, if Aperture has lost the connection to the originals used in the book.
If you no have done so already, repair (and if necessary rebuild) the Aperture library.
See: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
Regards
Léonie

How to support different language and print in non-english language from AS

I want to print different language that users enter in Oracle 9i AS and print reports in english and other language like spanish.
How do I configure the AS Server, I am running 9i AS on Windows 2003, I have changed NLS_Lang setting in registry but it doesn't work.
Please provide setting and if any environmental vairables I have to set in Reports properties files or elsewhere.
Thank you.

Did you select the languages on the first screens of the Universal Installer, when installing this instance? If not, you may need to do it again to enable support for that language.

Can I use Acrobat 11to download pdf that only allows me to read, enter data, and print?

I need to complete gov. forms available online as pdf. I can review, enter data and print, but I cannot save to my computer or anywhere else. I need to be able to save so I can return to the form and enter information as I access it. Can this be done if I purchase Acrobat 11 and, if so, can I get the Standard edition? I currently only have Reader.

Yes, if you upgrade to at least Acrobat Standard you will be able to save. Since you can't save with Reader (assuming 11), the forms are probably XFA forms (created with LiveCycle Designer), which must be Reader-enabled in order to be saved with Reader. Reader 11 can save non-enabled AcroForms (forms created with Acrobat), but not non-enabled XFA forms. If you have a Reader version prior to 11, try using Reader 11 to see if it will save.
If you can provide a link to one of the forms, I can tell you for sure what the minimum requirement for saving is.

Convert a web report into pdf and print (in BW 3.5)

Hello gurus,
i have few web reports ( created using WAD). i am looking for a possibility to convert a web report (viewed in a browser by a user) into pdf and print them and this should be done by pressing a button.
Is it possible in BW 3.5 version?.
could anyone please help me?
Any how to docs. would be really helpful.
thanks and regards
kumar

Here it is
<HTML>

<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_DATA_PROVIDER"/>
         <param name="NAME" value="DATAPROVIDER_1"/>
         <param name="DATA_PROVIDER_ID" value=""/>
         DATA_PROVIDER:             DATAPROVIDER_1
</object>
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_PROPERTIES"/>
         <param name="TEMPLATE_ID" value="ZPD_ADHOC_PAGE"/>
         <param name="MENU_BACK" value=""/>
         <param name="MENU_BACK_TO_START" value=""/>
         <param name="SUPPRESS_WARNINGS" value="X"/>
         <param name="MENU_FILTER" value=""/>
         <param name="MENU_FILTER_ON_AXIS" value=""/>
         <param name="MENU_SELECT_FILTER" value=""/>
         <param name="MENU_FILTER_ON_AXIS_CHART" value=""/>
         <param name="MENU_FILTER_CHART" value=""/>
         <param name="MENU_FILTER_DRILL_DOWN" value=""/>
         <param name="MENU_DRILL_UP_GIS" value=""/>
         <param name="MENU_DRILL_DOWN" value=""/>
         <param name="MENU_EXCHANGE_OBJECTS" value=""/>
         <param name="MENU_REMOVE_DRILL_DOWN" value=""/>
         <param name="MENU_SWITCH_AXIS" value=""/>
         <param name="MENU_HIERARCHY_NODE_DRILL" value=""/>
         <param name="MENU_HIERARCHY_DRILL" value=""/>
         <param name="MENU_HIERARCHY_STATE" value=""/>
         <param name="MENU_SORT" value=""/>
         <param name="MENU_CALCULATE_RESULT" value=""/>
         <param name="MENU_CALCULATE_VALUE" value=""/>
         <param name="MENU_CUMULATE_VALUE" value=""/>
         <param name="MENU_DISPLAY_DOCUMENTS" value=""/>
         <param name="MENU_DOCUMENT_CREATE" value=""/>
         <param name="MENU_DISPLAY_DOCUMENT_PROP" value=""/>
         <param name="MENU_DISPLAY_DOCUMENT_SELEC" value=""/>
         <param name="MENU_RRI" value=""/>
         <param name="MENU_EXPORT_TO_CSV" value=""/>
         <param name="MENU_EXPORT_TO_XLS" value=""/>
         <param name="MENU_BOOKMARK" value=""/>
         <param name="MENU_CHARACTERISTIC_PROPERTIES" value=""/>
         <param name="MENU_VALUE_PROPERTIES" value=""/>
         <param name="MENU_QUERY_PROPERTIES" value=""/>
         <param name="MENU_VARIABLE_SCREEN" value=""/>
         <param name="MENU_CURRENCY_CONVERSION" value=""/>
         <param name="MENU_ENHANCED" value=""/>
         TEMPLATE PROPERTIES
</object>
<HEAD>
<META NAME="GENERATOR" Content="Microsoft DHTML Editing Control">
<TITLE>SAP BW Reporting Print Page</TITLE>
<link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
<script type"text/javascript">

</script>
</HEAD>
<BODY>
<TABLE id="tp1" cellSpacing=0 cellPadding=0 width=660 border=0 >
    <TR>
    <TD vAlign=top align=left nowrap>
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="MYQUERY"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="GENERATE_LINKS" value=""/>
         <param name="WIDTH" value="660"/>
         <param name="BORDER_STYLE" value="NO_BORDER"/>
         <param name="SUPPRESS_REPETITION_TEXTS" value=""/>
         <param name="BLOCK_SIZE" value="3500"/>
         <param name="SHOW_PAGING_AREA_TOP" value="X"/>
         <param name="TARGET_DATA_PROVIDER_1" value="DATAPROVIDER_1"/>
         ITEM:            MYQUERY
</object>
    </TD>
</TR>
</TABLE>
<SCRIPT type="text/javascript">

</SCRIPT>
<STYLE>
input.ie55   { display: none }
</STYLE>

<STYLE media=print>
.noprint     { display: none }
</STYLE>
<script defer>
function window.onload() {
    if (!factory.object) {
        return
    else {
//     factory.printing.header = "SAP"
//     factory.printing.footer = "SAP"
        if ( varPaperSize == "2" ) { factory.printing.portrait = true; }
        else { factory.printing.portrait = false; }
        factory.printing.Print(true);
        // enable control buttons
/* var templateSupported = factory.printing.IsTemplateSupported();
       var controls = idControls.all.tags("input");
       for ( i = 0; i < controls.length; i++ ) {
           controls<i>.disabled = false;
           if ( templateSupported && controls<i>.className == "ie55" )
              controls<i>.style.display = "inline";
</script>
<P>
<div id=idControls class="noprint" style="VISIBILITY: hidden">
<input disabled type="button" value="Print this page"
onclick="factory.printing.Print(true)">
<input disabled type="button" value="Page Setup..."
onclick="factory.printing.PageSetup()">
<input class=ie55 disabled type="button" value="Print Preview..."
onclick="factory.printing.Preview()">
<input class=ie55 disabled type="button" value="Landscape"
onclick="factory.printing.portrait=false">
<input class=ie55 disabled type="button" value="Portrait"
onclick="factory.printing.portrait=true">
</div>
</BODY>
</HTML>

File and Printer Sharing Problem with WRT54G

I am currently having problems sharing files over my network. My setup consists of:
3 laptops (wireless)
1 desktop (wired)
WRT54G V6.0 router with firmware version 1.00.9.
All of the computers have File and Printer Sharing enabled, unique names, and are on the same workgroup. However none of the computers can see one another. When I try to view workgroup computers for my network places, the explorer window stops responding for about 30 sec. and then spits out a dialog with the error:
"Workgroup is not accessable. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The list of servers for this workgroup is not currently available."
I think that this problem has something to do with the router, as I have been successfuly sharing files and a printer with these settings using a microsoft 802.11b router for over a year. After purchasing the linksys and swapping it out with my old router, filesharing no longer functions.
I have spent a little time browsing the forums and have seen other posts from people with simmiler problems, but was unable to find any solutions.
Any help would be much appreciated.
Thanks.

I'm having the same problems as you are, I have 2 computers on wired the other wireless the router is in between and I can't access from either side, although I can ping and remote connect but just cannot share files across the network. I have looked all over the forums too and there saying to ditch linksys and do something else.
Its not you thats caused this it is the firmware and the router that have the problems.
My Specs:
WRT-54G
v5.0
That new firmware update 1.00.9 just isn't working right. I might downgrade my fireware to fix this problem.
Message Edited by justin2006 on 09-26-200612:24 PM

Personal File Sharing and Printer Sharing difficulty

I hope someone can help me, this is really irritating.
I have an Intel iMac running OS X 10.4.11 and a motley band of other computers, Mac and Windows. For the past few months, I haven't been able to use Personal File Sharing or Printer Sharing to connect to the iMac. Some details:
1) Everything used to work about 6 months ago, but stopped... I don't know exactly when it stopped and I don't remember any installations/updates/etc that happened around that time.
2) I can't connect from a OS X 10.3 Powerbook to the iMac, but I can connect from the iMac to the Powerbook.
3) None of my Windows computers are able to do anything.
4. All of the computers have no trouble connecting to the Internet.
5. I don't know if this means anything, but the iMac beeps as soon as the desktop appears on startup and right before the desktop disappears on shutdown.
Does anyone have any ideas? Everything seems to be set up properly... the Sharing control panel shows that all Personal File Sharing, Windows Sharing, and Printer Sharing are all running.
Thanks,
Joe

Hi Joe, and a warm welcome to the discussions!
1. Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
2. Find the IP of the iMac in it's Network Pref Pane>TCP/IP tab. In finder, select Go menu>Connect to Servers..., then on the PB, type in afp://ip.of the iMac, like...
afp://10.0.1.5
afp://192.168.1.3
3. From Windows®, try...
smb://10.0.1.5
smb://192.168.1.3
5. Open Console as soon as it boots up, check for meaningful messages.

CR Viewer tool bar images are missing; Export and Print are not working

Hi There
I used Crystal report 10.5(VS 2008 base crytal report -- CRRedist2008_x86.msi), i developed ASP.net application using VB.net program(i used .net 3.5). One of the pages in the application is having crystal report viewer, which is calling a crystal report to populate the result. The report is working as expected on development machine (Win Vista). Hence, I moved the application onto Server (Windows Server Web; 32Bit OS and IIS). I installed the CRRedist2008_x86.msi, which added the "aspnet_client" under default website. As my site is a made as an application under default webiste. I tried...
a) By copying the aspnet_client folder into the website folder
b) By adding a virtual directory called "aspnet_client" under my website pointing it into the folder under "default website"
None of the trials are working for me.
When I click on Print or Export buttons (although their images are missing), I get the error sigh on bottom left (status bar) of the browser and the popping up the same giving me below error details
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; HPNTDF; InfoPath.3; MS-RTC LM 8; .NET4.0C)
Timestamp: Tue, 2 Nov 2010 15:11:12 UTC
Message: Object doesn't support this action
Line: 41
Char: 1
Code: 0
URI: http://65.123.xxx.x:37188/xyzweb/(S(uhgxkx45iwlrbancwzfunp55))/reportpage.aspx
Any help in resolving this issue would be greatly appreciated.
Thank You,
Edited by: skbo007 on Nov 2, 2010 4:11 PM

Hello All.
I am excited to let you know that the issue is being resolved.
Here is steps that lead me to resolution and solution..
I installed Fiddler2 and looked into every the debugging details of the transaction while running the report.
Learned that the crystal report is using the aspnet_client foler under "Default website" NOT under the crrent website.
Hence I tried to access the image via http path from local machine
http://myserver/aspnet_client/system_web/2_0_50727/CrystalReportWebFormViewer4/images/toolbar/export.gif.
(Notice, "mysite" folder is been removed)
I was expecting to see the gif on my browsers' body. It gave me an error.
Investigated further more on the error and found that the "Managed Pipe Line" of the respective application pool is to be changed to "Classic" instead of "Integrated"
changed it .. Boom...
Tool bar is showing up with proper images and as well the "Export" and "Print" functions are working as expected..
Hope this helps to those in the same situation.
Again.. this is one of many many solutions on this issues.
Thank You
Edited by: skbo007 on Nov 3, 2010 9:42 PM

PDFs display and print fine in Acrobat but not in Preview of PDFPenPro

I have a curious problem in that check boxes in certain PDF files (insurance applications) appear as a "p" instead of a check box when I view the file in Preview or PDFPenPro. The check boxes appear and print properly when I open the PDF in Acrobat.
I've checked the fonts with the Apple Font utility and there seems to be no issues with any of the fonts.
Any suggestions?
Thanks.
Bud

Hi,
Strangely I'm now having exactly the same problem all of a sudden. I've been building the book for about a month now (I've made about 6 before without any trouble) and along the way have been producing a pdf of the book to see how it will look. Yesterday I noticed some of the images seemed to have lost colour when looking at the pdf version and then today, many pictures all of a sudden look exactly like the example you've supplied above.
I've tried shutting down my imac and restarting thinking it was a memory issue, have checked if I had any filters activated (which I don't and I haven't used filters in books before either), have tried repairing then rebuilding aperture, copying the book to a new library, new location, opening on a different mac and then printing again but none of this had any positive effect.
So from what I understand from your last post, the workaround you came up with was to revert to the original of each image that had the problem and then make the adjustments again?

How do I edit a "fill and print form" using Acrobat XI?

We recently upgraded to Adobe Acrobat Pro, version 11. We have some staff who previously created "fill and print" forms with Adobe Acrobat 10. However, now when they try to use version 11 to edit the form, they receive the following message: This form cannot be edited in Acrobat. Please use Adobe LiveCycle Designer to edit this form.
If I remember correctly, version 10 (or some package suite) use to install LiveCycle along with version 10. This doesn't seem to be the case with version 11. So... How do we obtain LiveCycle Designer? Is it still available to install on a desktop or is it only available in the cloud? Or, preferably, is there a way to edit the form using Acrobat Pro version 11?
I don't work with Adobe forms myself, so any information you can provide will be extremely helpful. Thanks.

LCD forms can only be edited in LCD. However, Adobe stopped distributing LCD together with Acrobat. You need to purchase it separately now, but if you had a previous license you can get it at a large discount, I think. Try the LCD forums for more info about that.

How do I edit a "fill and print form" using Acrobat Pro XI?

We recently upgraded to Adobe Acrobat Pro, version 11. We have some staff who previously created "fill and print" forms with Adobe Acrobat 10. However, now when they try to use version 11 to edit the form, they receive the following message: This form cannot be edited in Acrobat. Please use Adobe LiveCycle Designer to edit this form.
If I remember correctly, version 10 (or some package suite) use to install LiveCycle along with version 10. This doesn't seem to be the case with version 11. So... How do we obtain LiveCycle Designer? Is it still available to install on a desktop or is it only available in the cloud? Or, preferably, is there a way to edit the form using Acrobat Pro version 11?
I don't work with Adobe forms, so any information you can provide will be extremely helpful. Thanks.

LCD forms can only be edited in LCD. However, Adobe stopped distributing LCD together with Acrobat. You need to purchase it separately now, but if you had a previous license you can get it at a large discount, I think. Try the LCD forums for more info about that.

Pages disappear when viewing and printing

On our Windows 7 Professional (Service Pack 1) 64-bit computer, using the Reader application directly (not through a browser), we have been frustrated with blank pages appearing while viewing and printing.
This happens in Adobe Reader 9.5.0, 9.5.3, and 11.0.06. (We had been experiencing these problems with 9.5.3, so uninstalled and installed 9.5.0, then updated to 11.0.06. Same problem appears in all versions, but now is exceptionally bad in 11.0.06.   At one time we had updated to Reader 10, but reverted to Reader 9 because Reader 10 would not center pages correctly when printed, especially when Fit to Page was used.)
When we open a file, pages initially display correctly. But when we begin to scroll back and forth from page to page, the page images start disappearing. When we print, pages may display correctly just before the print button is pressed, and then may disappear after pressing the print button. If it disappears before the print function has completed, blank pages are output.   If a multi page document, the first few pages may print correctly then blank pages.
Once a page goes blank while viewing or printing, it does not restore. One must close the PDF file and open it again.
We have over 200 documents of 30 to 50 pages each, which are printed on a frequent basis and then bound. It is extremely annoying and costly to have blank pages output when there should be info on the page.    We have been printing these documents for eight years. Two years ago started using a brand new Windows 7 computer for printing PDF files, but the blank page issue started surfacing about 6 to 9 months ago and is getting more frequent.

The system has 4GB of memory. The processor is Intel Core i5 - 2400.
As per your suggestion, I updated the driver for the integrated graphics
card (Intel Graphics HD 2000). The new driver is dated January 2014. The
old driver was dated June 2011.
I tried to replicate the blank pages situation, and none went blank.   Will
continue to test over the next week or so, but this looks very promising.
Many, many thanks, Pat!

My office uses windows based computers setup with a server setup. Can an apple server emulate or find compatibility with an apple server or apple computer linked to the server and allow full file sharing and printer sharing with pc's?

I have 11 computers all pc's linked to an old windows server and all used primarily for microsoft office and printer sharing as well as for internet browsing. Can an apple joining the setup cause compatability issues?

HI,
grey-haired IT guy here, old enough to come from the counter culture. I ran (COO, including IT & compliance) a third billion dollar financial institution all on Macs 15 to 20 years ago. All the "experts" had a long list of reasons it would be impossible, and it drove the examiners nuts, but it's only gotten better.
So your benefits are going to be mostly in ease of administration after the learning curve, less aggravating glitches, better overall reliability, and arguably better security. And reductions in cost and improvement in time to implement changes.
In my current environment of mostly dozens of PCs, the moment I let the OS X Server be the domain master controller, the Windows network browser settled down and instantly showed network neighborhoods like it should have. (We may have some forgotten pre-NT machines plugged in somewhere -- this is NOT a financial institution).
Couple anecdotes might explain the feeling of coming in out of the cold: Putting a test copy of a web site from the cloud onto the Mac server, XAMPP or MAMP is pretty much already there. The site has a couple WordPress blogs, and they need .htaccess files, and Apache needs an option set to permit remapping URLs. After much searching far and wide to find why it didn't seem to be working, I found the checkbox right there on Apple's management screens. Much easier than editing .conf from command line. Linux web admins hate it.
Tale # 2: We aren't fully Windows domain controlled -- just using the old network browser. Need to upgrade that, and I Googled quite a while trying to understand what needed to be done to use Apple's Open Directory instead of setting up an Active Directory on Windows -- both SLDAP3. Turns out one reason I couldn't find much is there isn't much to say: it just works. Just join the domain from a Windows machine.
One more and I'll be quiet a bit. We use the Wiki collaboration which is nice enough as far as it goes (no spreadsheets, fatal flaw) and it occupies the server's native web site slot. So the test copy needed to be another site. Easy enough -- site setup is all GUI and works fine, but WordPress could not handle a multiuser blog coming to a non-standard port (other than 80) so I needed a second IP multihomed on the server. How do you do this? Go to Network in the System Prefs, click on the Ethernet interface and select "duplicate". Set your IP address. Done.
In summary a Mac OS X Server is a better server for a Windows shop than Windows Server 200x.
My bottom line for choosing Apple: lower blood pressure. I SHOULD be money. After all is said and done, it's about money. The incredibly more pleasant experience is a free benefit. You'll pay more for better hardware, but way less in time and trouble. And you won't be hounded on a daily basis to update the system. Not that Adobe or Firefox are any better about it on a Mac, but the Apple approach to updates stays in the background.
Think different. Simplify. Focus. Enjoy your work.

Convert external documents to PDF and print

Hi,
I have a SAP script and with some help from SDN I am at point where I can convert this SAP script to PDF using the function module below
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
* MAX_LINEWIDTH = 132
* ARCHIVE_INDEX = ' '
* COPYNUMBER = 0
* ASCII_BIDI_VIS2LOG = ' '
* PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = BINFILESIZE
* BIN_FILE =
TABLES
otf = DATAB[]
lines = PDFTAB[].
Now my requirement is, let's say I have an external doc(word or excel) residing on my PC. I have complete path of this file in my hand. I want to convert this file to PDF and append it to the above PDFTAB[] and print to the printer 'TDDEST' as a single document.
Thanks,

Hi,
use this code passing in v_url the complete path
START-OF-SELECTION.
SET SCREEN 100.
*&      Module STATUS_0100 OUTPUT
      text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'T1'.
*running down the pbo for the first time,
*create the controls and their containers
IF my_main_container IS INITIAL.
    CREATE OBJECT my_main_container
    EXPORTING
    container_name = 'CUSTOM_CNTL'
    EXCEPTIONS
    cntl_error = 1
    OTHERS = 2.
*create PDF Viewer object
    CREATE OBJECT my_pdf_viewer
    EXPORTING
    parent = my_main_container
    EXCEPTIONS
    cntl_error = 1
    cntl_system_error = 2
    OTHERS = 3.
    IF sy-subrc <> 0.
*could not create PDF Viewer
    ENDIF.
*my_pdf_viewer->LANGU = 'IT'.
    DATA: view_buttons_active TYPE char01 VALUE 'X',
    v_url TYPE char255.
    IF my_pdf_viewer->acrobat_vs_reader = ''.
      view_buttons_active = 'X'.
    ENDIF.
*create SAP toolbar for PDF Viewer
    CALL METHOD my_pdf_viewer->create_toolbar
      EXPORTING
        tool_buttons      = 'X'
        view_buttons      = view_buttons_active
      EXCEPTIONS
        cntl_error        = 1
        cntl_system_error = 2
        OTHERS            = 3.
    IF sy-subrc <> 0.
*could not create toolbar
    ENDIF.
*Open the PDF document
   IF NOT my_pdf_viewer->html_viewer IS INITIAL.
    CLEAR v_url.
    v_url = file.
    CALL METHOD my_pdf_viewer->open_document
      EXPORTING
        url = v_url.
    IF sy-subrc <> 0.
      SET SCREEN 1000.
      MESSAGE i208(00) WITH 'Documento non presente: riprovare'.
    ENDIF.
   ELSE.
    MESSAGE e208(00) WITH 'Impossibile aprire il documento'.
   ENDIF.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module EXIT-PROCESSING INPUT
      text
MODULE exit-processing INPUT.
fcode = ok_code.
CLEAR ok_code.
CASE fcode.
    WHEN 'BACK' OR 'EXIT' OR 'CANC'.
      SET SCREEN 0.
      LEAVE SCREEN.
ENDCASE.
ENDMODULE.                 " EXIT-PROCESSING INPUT

LCD Calibaration and Printer Non-recognition

Similar Messages

Maybe you are looking for