LCD Display and LCD Back cover Broken

My hp 15-d006tx Notebook PC is broken at LCD Display.

Hello noorulhaq03,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the screen of your notebook is broken, and I would be happy to assist you in this matter!
Since the LCD screen has sustained physical damage, I recommend ordering a new screen for your computer. The spare part numbers  can be found on the top of page 24 of the Maintenance and Service Guide. 
If you notebook is still in warranty, I recommend contacting our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • LCD Back Cover for MSI GT780DXR

    Hi people
    First of all hi everyone in this forum 
    I just recently broke the LCD back cover from my MSI GT780DXR in the area of the right hinge. The "structures" for the screws are broken from the cover, and after trying to glue it back I desist and I'm searching for a new cover 
    I've been surfing the internet trying to find the cover for my model (apparently the msi 1761 "structure") and the only place I have found the actual cover is in rkcomputers. Is really expensive (125$!!) but the problem is that they apparently don't send products to Europe (I live in Denmark).
    Anyone here can help my?

    Ask MSI for a spare part: >>How to contact MSI.<<

  • Portege R705-P25 LCD Back Cover Assembly part number

    Hi all,
    I'm looking for the part number for the LCD Back Cover Assembly. The Cover hast the following code in it
    GM902984813A-D
    but I'm not able to find the right part for it. I tried to look for it in "National Parts Depot" but I need another part #, something like P000.....
    The Laptop is the following:
    Toshiba Portege R705-P25  
    Part #: PT314U-00U014
    Serial #: XXXXXXXXX
    and the LCD screen has the following part # in it:
    NRL75-EE09916A 00625D1H 4771
    Maybe one of you, or someone from Toshiba-Support can help. 
    Thank you
    [Moderator edit to remove serial number.]

    I'm sending you a PM with a little more information.
    - Peter

  • I've broken my iPhone 4, my frontal display and the back screen so, I'd like to know how much is to change it ?

    I've broken my iPhone 4, my frontal display and the back screen so, I'd like to know how much is to change it ?

    The state of the warranty no longer matters since accidental damage itself voids the warranty.  Apple calls replacement due to damage an out-of-warranty replacement so there is no misunderstanding about that.  And they take it just a little further by saying if you try and repair it yourself, then they won't have anything to do with the iPhone ever again.  They are pretty emphatic about what they will and will not do in the way of replacing.
    You can, of course, take the iPhone to an Apple Authorized Repair Service and see if they will replace the screen and back and how much that would cost.  That way Apple will still deal with you if necessary.

  • How much is to change frontal display And the Back ?

    I've broken my iPhone 4, my frontal display and the back screen so, I'd like to know how much is to change it ?

    You should see if you have 3rd party in your area that fixes iphone.  They can answer the question for you.
    apple doesn't replace screens.

  • Does Premiere 5.5, on a Mac, with a AJA Kona 3G display and play back footage from a RED Scarlet-Dragon or Epic-Dragon  in 4k?

    I currently work on the following mac.  It has an AJA Kona 3G Card.
    Curious if I can get this system to play back the red files on the client monitor.  I'm using a JVC
    DT-R24L41DU.
    I know that this monitor won't display the 4k image.  I will be getting one that does.  But for sake of argument, does anyone have any success with the config I have outputting 4K to a client monitor?
    thanks,

    The optimal RAID solution are the ARECA raid controllers.  If you want a total engineered RAID solution one of the Areca outlets can do that for you.  Another total systems solution is probably available from ADK VideoEditing, they use an also good line of RAID controllers from Intel which are actually manufactured by LSI
    Also look at our PC oriented benchmarks PPBM5 and notice that many of the better scoring systems use Areca and Intel.
    I wish we had a procedure to test Macs with our PPBM5 tests but both Harm and I are not Mac users so we cannot use the Mac terminology to write one.  Eric at ADK since he sits on both sides of PC and Macs has run PPBM5 on a well set up Mac Pro 2010 using the onboard RAID controller.  Maybe with your heavy PC background you could interpret the PC procedures to your Mac and see how those two machines compare.  If you are interested PM me and I can give you more information

  • Dropped iphone 4s and back cover has a huge crack. any way to fix the crack

    I accidentally dropped my iphone 4s and the back cover has a crack, how can i fix it?

    All you can do is get the broken back cover replaced.  First call would be one of your carriers shops or Apple store, other than that loads of repairers on the web. And then get your self a good quality Case for your Idevice
    i.e. Otterbox Lifeproof etc saves a lot of hassle

  • Laptop screen cover broken

    Hi,
    I have an age old G50 laptop. Over the weekend, my kid fell over it and broke the LCD back cover.
    The screw holders on the LCD back cover and the brackets got broken.
    Looks like i need the below part.
    487605-001
    LCD panel back cover assembly
    It is a 3 year old G50 laptop. I understand it is not one of the popular models.
    This particular part seems to be very hard to get. 
    If you could suggest any other model's part that might fit this one, that would be great.
    Like one of the DV 15'' laptop's part.
    Product : HP G50
    Service Tab : G50-104NR
    S/N : [Personal Information Removed]
    P/N : fr949ua#aba
    Thank You

    I have 2 HP Laptops as well that I use. One i just bought last year, and anotehr about 2 years ago. Both laptops have brook at the hinge where it screws into the cover.......Very poorly made I have been told by many repair Techs. They were able to repair one of them, but they cannot find the cover for my G70. It is very  frustrating to know that you purchase something that breaks so easily yet you cannot get the part to fix it.....I believe they do this so you are forced to go buy another computer.
    If I cannot fing this part that I have been looking for for over 2 weeks with NO help from HP then I will go buy another laptop, just not an HP. Ever again!!
    I currently have 4 HP laptops and 3 HP towers in my office

  • Can I no longer view my back cover (or additional) artwork in iTunes 10.6???

    Hello, I have gone to great effort to scan in and add back cover artwork to many of my albums.
    It used to work that I could view the back cover (or any other additional artwork) that I added to a song by clicking a set of forward and backward arrows that were to the left and right of where it says "Now playing" or "Selected item". Now with iTunes 10.6 (maybe before) I can no longer flip through my songs that have more than one artwork graphic added. I've tried right clicking, opening the artwork into the separate window… nothing. There doesn't seem to be a way anymore to view my back covers.
    Can anyone else confirm this, and if this is the case, can you all help me get on Apple's case and tell them to put this feature back in?
    Thanks,
    Andrew Jung.

    In the release notes it says:
    Improved album artwork handling, downloading, and display
    This does not seem like an improvement to me.
    -aj

  • IPhone with different back cover?

    I see some iPhone 3G that has different back cover. Its white or grey on top and black on the bottom. Kind of like those griffin type of cover where you can just slide the phone in but this one has an apple logo on it. But I don't think it a separate cover because I can still see the chrome or silver around the iPhone and I dont think its a clear cover too. Is this some kind of a special built iPhone? Thanks

    That's not an iPhone 3G, that the original iPhone, released before the iPhone 3G. It cannot run on the 3G network, and the back cover of the original iPhone is metal--therefore grey, and black on the bottom, where the speakers and antenna are. It's no longer sold commercially by Apple, but you can get it on eBay and Craigslist and places like that. I own an original iPhone.

  • My ipod is broken. The home button doesn't work, so I took it to a tech shop and they also said that the LCD cable was broken and my screen is cracked. Will apple fix my ipod or just replace it?

    I would like to know if apple will replace it. If not, then I will take somewhere cheaper but it has some scratches so I would like to get a new one.

    The home button doesn't work, the LCD cable is broken and the screen is cracked!  Wow.  That's the worst case of abuse that I've seen.  I think that Apple will laugh at you.

  • Hello,Where in Singapore can I get a LCD display and touch screen digitizer for a iphone 2g.

    Hi there,Where in Singapore can I get a LCD display and touch screen digitizer for a iphone 2g.

    Try searching google.

  • Hi, I have a Apple A1083 Cinema Hd Display 30" Widescreen with a broken lcd, where can I get the replacement part ?

    Hi, I have a Apple A1083 Cinema Hd Display 30" Widescreen with a broken lcd, where can I get the replacement part ?

    Hi, I have a Apple A1083 Cinema Hd Display 30" Widescreen with a broken lcd, where can I get the replacement part ?

  • Envy 6-1010ea Display cover broken

    Hi ,
    I have an Envy 6-1010ea for 5 months now and something has broken.
    The display back cover has a plate in which the hinge is screwed onto. The plate is bonded onto the display cover and has come apart from the actual display cover causing the display only to be supported by one hinge and unabling me to close the laptop.
    What can I do to get it repaired? I need it for uni and cannot spend much to repair it.
    Thanks,
    Anthony

    ineaxm wrote:
    Hi
    I've suffered the same problem with my HP Envy - bought 8 months back here in the UK. Not sure which region you're in - did you actually approach HP or your retailer with the broken hinge seeing your machine was only 5 months old and under warranty - no doubt you saw countless other people in the same boat as you on the following thread - http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/Frustrated-with-HP-Envy-6-1001TX-hinges-sna...
    I just posted on that thread asking if UK owners had any joy with HP fixing under warranty. Would be interesting to know how you got on.
    Thanks
    Hi,
    I read the thread. PC World Currys refused to fix it and I think that HP returned a laptop without fixing it too. I would contact HP customer support as PC World store assistants - customer support are not always competent at least from my experience and I do not buy anything from them at all. If users describe what's wrong and how many there are HP should understand and repair it for free as a design fault.
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • LCD BACK LIGHT

    I am having problem with back light after updating the OS to WIndows 10 Technical preview.
    before I used Windows 8.1 that was factory OS at that time there was nor problem with back light off and ON
    Now backlight is getting off after the set time(1min ) but the screen is something like a grey colour only not getting off completly.
    I asked windows about this,they told to check drivers ,I used HP assistant to update everything.Still the display is getting into grey only
    I would like to know about What I can do to turn of my LCD and Backlight completly to save energy and plese let me know any software is missing 

    Binubahrain wrote:
    I have one Compaq Presario C300 Laptop.  Just before two days I have replaced the LCD with a new one.  Now everything is working fine when I connect the charger.  When I disconnect  the charger power  (Switched to Battery Mode), the laptop is working but LCD Back light gets off Immediately. Even in that state the laptop is working and I can see the Display in LCD without light.  I have tried to increase the brightness of screen usin fn+F8 key, its not working.  In Charger power mode every thing is ok.  In DOS Mode and BioS Screen also same thing is happening.  Then I have connected the Charger again backlight is not getting on.  To get the display back I need to restart the PC after connecting the charger.
    What will be the problem?
    Can U help me.  IS it any hardware failure.
    Expecting a Reply.
    If you've replaced the LCD then it's probably the LCD power inverter board that is the problem.

Maybe you are looking for

  • Trouble starting up when cold

    I bought my power mac about 5 years ago. Last year I started having trouble starting up when the machine was cold. I put a heater on the unit for about 30 minutes in the morning and then it would start up ok. Through the summer and once the weather g

  • Bizarre audio sync issues

    I'm having trouble even understanding how the following is possible. I have an after effects composition that I am importing as a lower third graphic on video track 2.  When I place it on the timeline, all my audio goes out of sync.  Not just the aud

  • Sticky load balancing not working  because of Address Translation

              This came up before - see below. I don't understand what the           soltion is/was.           WL Server puts it's ip address in the WebLogicSession cookie           which is an internal address 192.168.201.41           WL proxy knows WL

  • Can't import photos from iPad

    When I plug in my iPad to my MacBook in iTunes it shows up as my iPad.  But when I open iPhoto to import the pictures on my iPad it tells me that the device that is plugged in is my iPhone and it won't let me import my photos.  Does anyone know what

  • Report based on two (or more) views

    Hi, Situation is this - I have two views, which have same type and number of rows. My goal is to create a report which has one bind variable (let's say ':query_nr') so, that when :query_nr=1 then report shows data only from the first view, and when :