LCD Displays for T20, T21, and T23

Have three T20 and T21 laptops with bad mother boards and good LCD displays. Have two T23 laptops with good motherboards and blank LCD displays (but work great with an external monitor).
Can T20 and T21 LCD displays be removed and installed and operate on a T23?
Thanks!

Yes they are swappable.
Just make sure that resolutions match, namely, if you're installing a XGA screen from a T20 into a T23 which had a SXGA+ LCD (not all of them do, run the model numbers on Lenovo's site) you'll have to use the appropriate LCD cable and inverter.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

What's a good LCD display for graphics arts and print production needs?

Hi all,
It's true that the good ol CRT displays in the past were the best. They have the Trinitron tube and had clearity. I'm looking to purchase an LCD monitor that'll come close to a Sony CRT monitor and can handle my graphics art projects. Any thoughts and direction is appreciated.
Thanks
Web dude

CRTs are dead. Please just let them die...
Funny you should say that. I just bought a brand new Philips 22" CRT (for AU$260). I decided to take that path for another few years after looking at the Cinema displays (23" and 30") and noticing severe discolouration at shallow viewing angles (like when you sit closely in front of the monitor to compare three photos side-by-side). Interestingly, the 24" iMac screen doesn't have this problem.
I can't afford or justify the exquisite Eizo LCD screens, so I got the CRT (the best Philips ever made) and couldn't be happier. I've got plenty of space on my corner desk, btw.
Cheers
Steffen.

LCD display for Hardware Monitor?

Hardware Monitor...
http://www.bresink.com/osx/HardwareMonitor.html
...supports certain external, USB-based LCD displays for providing system status. Is anyone using one?
Can anyone recommend a nice, already-assembled unit to set on the desk here? Thanks.
blakespot

Sadly none of the above unit will work w/ Hardware Monitor.
I just received this email from the author after inquiring about the above displays compatibility w/ Hardware Monitor:
Unfortunately, these vendors are completely unknown in Europe and
they only offer drivers for Windows, so no support for these modules
is possible so far.
If not, is there a ready-made, external (already in a little
enclosure) unit that does?
No, I am currently not aware of any ready-made units. Unfortunately
the market for these devices seems to be so small that no worldwide
vendor has established an industry standard yet, or could provide
an open software layer for Mac OS X. When such a solution exists, we
will immediately support it in Hardware Monitor.
For more information about LCD unit support please see the chapter
"Controlling external alphanumeric displays" in the reference manual
of Hardware Monitor.
blakespot

Hi ,i buy a new lcd screen for my laptop, and when technician turn it on 2 white spots, appears, he say that the base that support the lcd screen its the responsable of white spot its true ?

Hi ,i buy a new lcd screen for my laptop, and when technician turn it on 2 white spots, appears, he say that the base that support the lcd screen its the responsable of white spot its true ?

If you've had it for less than a year, then it's still under warranty. Take it to an Apple store or an authorized service facility. See http://support.apple.com/kb/HT1434

Replacement LCD display for AIO

HP Omni 120-1034 fell forward on the desk, and the LCD display is cracked. The pc is out of warranty so I want to replace the screen but need to find the part number and a source for the part itself. Any suggestions welcome, I'm findin the HP support site less than helpful so am turning to the forum. Thanks so much.

Spoiler (Highlight to read)
Maybe have your screen replaced by Lenovo Support. Replacing a tablet LCD can be tricky maybe.
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx

Which LCD display for better colors?

I know most of you would prefer a CRT monitor for better colors but what are the options if i choose an LCD/TFT display? I tried and returned two LCD monitors in past and i don't want to waste more time and money. I heard Eizo ColorEdge series have good colors but they are way expensive. any ideas?
A. Zeb
[signature deleted by host]

Nevermind... After some research, I bought two Dell Ultrsharp 2209WA monitors. These are e-IPS pannels and are far better in colors and viewing angles compared to the ordinary TN pannels. IPS pannels are expensive but worth every penny ...
A. Zeb
[signature deleted by host]

LCD display for graphic designer/photographer

My Mac Pro two 2.26 GHz Quad Core should arrive in a couple of days. I'm now in the process of choosing a 22"-24" LCD display monitor. As I am not attracted to the Apple 24" display's glossy surface, I've narrowed display choices down to these:
1) EIZO CG222W 22.2" Widescreen LCD
2) NEC MultiSync 2490WUXi 24.1" Widescreen LCD
Anyone using or know anything about either of these? I understand they are popular with graphic artists and photographers, but I am particularly interested in learning of any compatibility issues with the early 2009 Mac Pro/OS 10.5.6. NEC's support website notes possible compatibility issue between its 2490WUXi SpectraView II calibration software and OS 10.5.6.
If I chose the NEC model, could I use another calibration software/colorimeter with it instead? If not, then I would just go with the EIZO.

just got my two 26" NEC MultiSync LCD2690WUXi2 and hooked them up to a new nehalem mac pro with a radeon 4870. the monitors work perfectly. all i can say is wow. the color accuracy out of the box is great. the brightness uniformity is incredible. the blacks are really black and the whites are perfectly white. i've owned two 23" apple cinema displays and two 24" led cinema displays in the past, and these NECs look much better. very professional.
i do have two gripes with the 26" NEC MultiSync LCD2690WUXi2. its cased in some sort of plastic. the base is made from the same material. i'd rather have an aluminum casing and base like apple provides. the other grip is that there is a lot of flex where the actual panel attaches to the base. its a bit wobbly. this i don't like at all. they could have done something better with this. otherwise no other problems to report.
but all in all, the image on the screen is so good, that i won't complain anymore from this day forward. an absolutely stunning image on these screens. love em'!!

What is best way to get LCD display for Mac mini?

Just got Mac Mini but when I connect it to my Samsung LCD the display quality is crap. What is the best way to get HD resolution, (maximum quality) from this set up?

Thanks,
I did try all of the settings on the LCD display. It is 1,920 x 1,080 pixels. Built in 2011 by Samsung as a HD TV, computer monitor and audio/video combo. I just let the Mac mini select the appropriate settings when I did initial startup last night. I It came with an HDMI to DVI adapter which (to me) implies I need to get the male end of the DVI adapter to connect to the 9 pin (PC input). Current HDMI is working but just not the "wow factor" that I expected from the Mac mini. Compatibiltiy issue of some kind; input/output, settings, software update, or user error Was trying to avoid getting a new monitor.

Web sites display for a second and dissappear

On both iphone 4 and 5 I open web sites, they display for a second or two and then disappear. Weather Channel.com is an example, the pages loads for a second and is gone. The title is still at the top, but the page is white...I have tried everything. Any help would be greatly appreciated!

For issues with Apple devices contact the Apple support team http://www.apple.com/support/contact/

New and improved panels (display) for the Tx20 and Wx20 series or just the X220 series?

Lenovo surly impressed us with the specifications with their new Lenovo ThinkPad X220-series notebook, not only does it feature great performance and battery life but suddenly they've gone away from the rather sluggish TN-panels they've been using for the past few years and given us a high-quality IPS option for those whom care about display quality.
Now the million dollar question is whether they'll do something about the display panel quality on their other ThinkPad line-ups or is just something happening on the X220 series? Personally the ThinkPad T420s is more appealing than the ThinkPad X220 simply because of the size being somewhat too small for my use, id like to opt for the T420s instead because that assures me more space for my hands to rest, a not too small screen along with a few other things.
I wasn't really planning on going ThinkPad this year because the display quality of my ThinkPad T400s and ThinkPad W510 has been a complete joke. Whereas the 1920x1080 panel on the W510 is doing okay it's still a rather low-contrast panel without barley anything impressive about it and when it comes to the display quality of the T400s it's downright disappointing with it's low-contrast, limited viewing angle screen.
So when I had finally decided to look elsewhere Lenovo drops the X220 with good hardware, battery life and most importantly a IPS panel option I was happily surprised and considering I love everything about the ThinkPad series besides the sluggish speakers and display quality I'm ready too pick up yet another ThinkPad series notebook if Lenovo finally offers some improved quality on their display offerings.
But would it be too much to hope for seeing improvements in regards of the display on the T and W series as well or do you think this is a X220 series only thing? And I guess we wont see anything higher resolution than 1366x768 which even though it's IPS quality is somewhat low resolution when I'm used to 1920x1080 on my W510 for instance.

I figured IPS is not going to happen this year, but as the new T420 and T420s is 16:9 compared to last years T410 and T410s and the T400 and T400s before that 16:10 screens there must be some new panels coming this time around?
Lets just hope it's not the same low contrast TN-panels like before as there is no doubt that you can get TN-panels that are way better than what Lenovo has been using for the past years.

ALV display for row s   and columns in this format.have ur full points..

Hi ALL
I have to dispalay data in the ALV format as :
Basic
DA
HRA
PF
VPF
20000
500
5000
| 1500     | 600 |          |
Details : Basic   HRA in one Row and   PF , VPF in second Row.
The Amount regarding htese fields are also displayed in the next rows for all emp. numbers.
its urgent for me and need helpful answers...
Regards
Lakhan

see the attached code it will display the hierarchial display as per your need
change the internal tables with dat of your own orgn structure and pass it to the fun module.
Description : Pick Status Report
This is an ALV report using the heirarchical ALV list display. The
report selects all deliveries that fulfil the selection criteria
and displays a summary of all items in that delivery with reference
to certain statuses: overall status, goods issue status, transfer
order status, load to pallet status, pallet count status, loaded to
van status, van manifest printed status and end of day manifest
printed status. These statuses have been defined by the business.
There is extra functionality required to trigger printing of the van
and end of day manifests from this report, and to set the loading
end status of a shipment if the last handling unit of a particular
shipment has been loaded onto a van for which the van manifest has
been triggered.
REPORT zwmr_pick_status_report NO STANDARD PAGE HEADING
MESSAGE-ID zw.
Type Pools
TYPE-POOLS: icon, slis.
Tables
TABLES: tvst,
likp,
t30b,
vekp,
*{ INSERT UKMK900355 4
zhu_to_link, "AS03
*} INSERT
zpallettr,
vttk, "MB01
zvantr.
Types
TYPES:
BEGIN OF ty_data,
lgtor LIKE likp-lgtor, " door
vbeln LIKE likp-vbeln, " delivery
wbstk LIKE vbuk-wbstk, " Goods movement status
kostk LIKE vbuk-kostk, " Picking status
posnr LIKE lips-posnr, " item
route LIKE likp-route, " route
wadat LIKE likp-wadat, " goods issue date
lvsta LIKE vbup-lvsta, " warehouse status
packvorschr LIKE vekp-packvorschr, " pack mnemonic
exidv LIKE vekp-exidv, " handling unit
zpallet_no(10), "like zpallettr-zpallet_no, " pallet no
zdep_point LIKE zpallettr-zdep_point, "Departur Point "Jvdm01
zcount_check LIKE zpallettr-zcount_check," count check flag
zvan_no(10), "like zvantr-zvan_no, " van no
zvan_print LIKE zvantr-zvan_print, " van manifest print
tknum LIKE vttk-tknum, " Shipment No "ANV 11523
zeod_print LIKE zvantr-zeod_print, " eod manifest print
zzpackclass LIKE vekp-zzpackclass, " package class
zzti LIKE vekp-zzti, " T.I. value
vstel LIKE likp-vstel, "Shipping point RM050906
anzpk TYPE znopack, "No of packages in dlv MB01+
END OF ty_data.
TYPES:BEGIN OF x_likp ,
vbeln LIKE likp-vbeln,
vstel LIKE likp-vstel, "RM050906
lgtor LIKE likp-lgtor,
zzroute2lgtor LIKE likp-zzroute2lgtor, "MB01
route LIKE likp-route,
wadat LIKE likp-wadat,
zz2route LIKE likp-zz2route, "MB01+
zzexproute LIKE likp-zzexproute, "MB01+
zzroute2 LIKE likp-zzroute2, "MB01+
anzpk LIKE likp-anzpk,
END OF x_likp.
TYPES: BEGIN OF x_vbuk,
vbeln TYPE vbuk-vbeln,
wbstk TYPE vbuk-wbstk, " Goods movement status
kostk TYPE vbuk-kostk, " Picking status
END OF x_vbuk.
TYPES: BEGIN OF x_lips,
vbeln TYPE lips-vbeln, " delivery
posnr TYPE lips-posnr, " item
pstyv TYPE lips-pstyv,
matnr TYPE lips-matnr,
charg TYPE lips-charg,
END OF x_lips.
TYPES: BEGIN OF x_vbup,
vbeln TYPE vbup-vbeln, " delivery
posnr TYPE vbup-posnr, " item
lvsta TYPE vbup-lvsta, " warehouse status
END OF x_vbup.
TYPES: BEGIN OF x_vepo,
venum TYPE vepo-venum, "Internal Handling Unit
Number
vepos TYPE vepo-vepos, "Handling Unit Item
vbeln TYPE vepo-vbeln, " delivery
posnr TYPE vepo-posnr, " item
exidv TYPE vekp-exidv,
END OF x_vepo.
TYPES: BEGIN OF x_vepo1,
venum TYPE vekp-venum, "Internal Handling Unit
Number
exidv TYPE vekp-exidv,
END OF x_vepo1.
Start of changes by ANV SR#11523
TYPES: BEGIN OF x_vttp,
tknum TYPE tknum, " Shipment No
tpnum TYPE tpnum, " Item No
vbeln TYPE vbup-vbeln, " delivery
laufk LIKE vttk-laufk, " leg indicator MB01+
END OF x_vttp.
End of changes by ANV SR#11523
Data
RANGES: r_del FOR likp-vbeln,
r_lgtor FOR likp-lgtor.
RANGES: r_vanno FOR zvantr-zvan_no,
r_palno FOR zpallettr-zpallet_no.
DATA: BEGIN OF number_range OCCURS 0,
mark(1),
id(3),
num(10) TYPE n,
desc LIKE zpalletmd-zdesc,
END OF number_range.
DATA: t_disp_tab TYPE STANDARD TABLE OF zpickdisp,
t_data_tab TYPE ty_data OCCURS 0 WITH HEADER LINE,
it_likp TYPE x_likp OCCURS 0 WITH HEADER LINE, "SUM
it_vbuk TYPE x_vbuk OCCURS 0 WITH HEADER LINE, "SUM
it_lips TYPE x_lips OCCURS 0 WITH HEADER LINE, "SUM
it_vbup TYPE x_vbup OCCURS 0 WITH HEADER LINE, "SUM
it_vepo TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
it_vepo2 TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
*{ INSERT UKMK900355 3
t_vepo_low TYPE x_vepo OCCURS 0 WITH HEADER LINE, " AS01
*} INSERT
it_vepo1 TYPE x_vepo1 OCCURS 0 WITH HEADER LINE, "SUM
it_vttp TYPE x_vttp OCCURS 0 WITH HEADER LINE, "ANV SR#11523
t_disp_head TYPE STANDARD TABLE OF zpickhead.
DATA wa_item_tab TYPE zpickdisp OCCURS 0 WITH HEADER LINE.
"ANV SR#11113
DATA: w_numrnge LIKE number_range,
w_number(10) TYPE n.
DATA: t_likp LIKE likp OCCURS 0 WITH HEADER LINE,
t_lips LIKE lips OCCURS 0 WITH HEADER LINE,
t_vbuk LIKE vbuk OCCURS 0 WITH HEADER LINE,
t_vbup LIKE vbup OCCURS 0 WITH HEADER LINE,
t_vepo LIKE vepo OCCURS 0 WITH HEADER LINE,
t_vekp LIKE vekp OCCURS 0 WITH HEADER LINE,
t_vantr LIKE zvantr OCCURS 0 WITH HEADER LINE,
t_pallettr LIKE zpallettr OCCURS 0 WITH HEADER LINE,
w_likp like likp,
w_lips LIKE lips,
w_vbuk LIKE vbuk,
w_vbup LIKE vbup,
w_vepo LIKE vepo,
w_vekp LIKE vekp,
w_vepo TYPE x_vepo1,
w_vbup TYPE x_vbup,
w_vttp TYPE x_vttp, " ANV SR#11523
w_lips TYPE x_lips,
w_vbuk TYPE x_vbuk,
w_likp TYPE x_likp, "MB01-+
w_tplst LIKE vttk-tplst. "MB01+
DATA: s_variant LIKE disvariant, "MB01+
def_variant LIKE disvariant.
ALV DATA *****
DATA:
g_grid TYPE REF TO cl_gui_alv_grid,
g_sort TYPE slis_t_sortinfo_alv,
g_custom_container TYPE REF TO cl_gui_custom_container,
g_layout TYPE slis_layout_alv,
gt_fieldcat TYPE slis_t_fieldcat_alv,
t_fldcat LIKE LINE OF gt_fieldcat,
g_keyinfo TYPE slis_keyinfo_alv,
gt_events TYPE slis_t_event,
gs_event TYPE slis_alv_event,
w_sy_repid LIKE sy-repid.
DATA: BEGIN OF seltab OCCURS 0.
INCLUDE STRUCTURE rsparams.
DATA: END OF seltab.
SYSTEM GENERATED TABLE CONTROL DATA ********
DECLARATION OF TABLECONTROL 'TC_TABCON' ITSELF
CONTROLS: tc_tabcon TYPE TABLEVIEW USING SCREEN 0100.
LINES OF TABLECONTROL 'TC_TABCON'
DATA: g_tc_tabcon_lines LIKE sy-loopc.
DATA: ok_code LIKE sy-ucomm.
Constants
CONSTANTS: c_data_class LIKE klah-class VALUE 'DG_DATA',
c_mat_class LIKE rmclf-klart VALUE '001',
c_pack LIKE lips-mtart VALUE 'VERP',
c_a(1) VALUE 'A',
c_b(1) VALUE 'B',
c_c(1) VALUE 'C',
c_yes(1) VALUE 'X',
c_no(1) VALUE ' '.
Selection screen
standard report select options block
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-002.
SELECT-OPTIONS:
s_wadat FOR likp-wadat NO-EXTENSION OBLIGATORY. " Goods Issue Date
*parameters: "TR01-
p_vstel like tvst-vstel obligatory. " Shipping Point "TR01-
SELECT-OPTIONS: "TR01+
p_vstel FOR tvst-vstel. " Shipping Point "TR01+
SELECT-OPTIONS:
s_lfart FOR likp-lfart, " Delivery type
s_lgtor FOR t30b-lgtor, " Door selection
s_exidv FOR vekp-exidv, " Handling Unit
s_vbeln FOR likp-vbeln, " Delivery "MB01-+
s_lfdat FOR likp-lfdat. " Delivery date
PARAMETERS:
p_exdata AS CHECKBOX. " Show extra columns flag
SELECTION-SCREEN END OF BLOCK a.
van/pallet specific select options block
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-001.
SELECT-OPTIONS:
s_palno FOR zpallettr-zpallet_no, " no-extension,
s_vanno FOR zvantr-zvan_no. " no-extension.
SELECT-OPTIONS:
s_deppnt FOR zpallettr-zdep_point, "Jvdm01
s_tplst FOR vttk-tplst. "MB01
SELECTION-SCREEN END OF BLOCK b.
MB01 - START - Display variant
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-019.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK c.
MB01 - END
Value Request Events
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-high = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-high = w_number.
MB01 - START - display variant
F4-Help for variant
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
MB01 - END
At Selection Screen
AT SELECTION-SCREEN.
PERFORM validate_selections.
Initialization
INITIALIZATION.
MB01 - START INSERT
1. Transportation planning point
Import transportation planning point from user parameters and
populate
select option.
GET PARAMETER ID 'TDP' FIELD w_tplst.
MOVE: 'I' TO s_tplst-sign,
'EQ' TO s_tplst-option,
w_tplst TO s_tplst-low.
APPEND s_tplst.
2. Display variant
CLEAR s_variant.
s_variant-report = sy-repid.
Get default variant
s_def_variante = s_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = s_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = s_variant-variant.
ENDIF.
MB01 - END INSERT
Start of selection
START-OF-SELECTION.
clear all data tables
CLEAR: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr,
w_likp,
w_lips,
w_vbuk,
w_vbup,
w_vepo,
w_vekp.
REFRESH: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr.
select data for ALV
due to different input parameters being used, to streamline the data
selection process, different selection methods are required
IF NOT s_vanno IS INITIAL
OR NOT s_palno IS INITIAL
OR NOT s_deppnt IS INITIAL. "Jvdm01
if selecting by van/pallet number, need to select the data from the
handling unit upwards to delivery
PERFORM select_data_up.
ELSE.
otherwise the data can be selected from the delivery downwards
PERFORM select_data_down.
ENDIF.
End of selection
END-OF-SELECTION.
call hierarchical ALV display function module
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZWMR_PICK_STATUS_REPORT'
i_callback_pf_status_set = 'SET_STATUS'
i_callback_user_command =
'USER_COMMAND' "custom gui status form
is_layout = g_layout "user command form
it_fieldcat = gt_fieldcat
it_sort = g_sort
i_save = 'X' "MB01+
is_variant = s_variant
it_events = gt_events
i_tabname_header = 't_disp_head'
i_tabname_item = 't_disp_tab'
i_structure_name_header = 'ZPICKHEAD'
i_structure_name_item = 'ZPICKDISP'
is_keyinfo = g_keyinfo
TABLES
t_outtab_header = t_disp_head
t_outtab_item = t_disp_tab.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORMS
Includes inserted by Screen Painter Wizard. DO NOT CHANGE THIS LINE!
INCLUDE zwmr_pick_o01.
INCLUDE zwmr_pick_status_reporto01 .
INCLUDE zwmr_pick_i01.
INCLUDE zwmr_pick_status_reporti01 .
INCLUDE zwmr_pick_f01.
INCLUDE zwmr_pick_status_reportf01 .
*& Form select_pal_nos
select pallet numbers for search help
FORM select_pal_nos.
DATA: BEGIN OF t_palno OCCURS 0,
zpallet_no LIKE zpallettr-zpallet_no,
END OF t_palno.
select all available pallet numbers
SELECT DISTINCT zpallet_no FROM zpallettr
INTO CORRESPONDING FIELDS OF TABLE t_palno.
LOOP AT t_palno.
get pallet id
SELECT SINGLE zpallet_id FROM zpallettr
INTO number_range-id
WHERE zpallet_no = t_palno-zpallet_no.
get pallet description
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_palno-zpallet_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_pal_nos
*& Form select_van_nos
select van numbers for search help
FORM select_van_nos.
DATA: BEGIN OF t_vanno OCCURS 0,
zvan_no LIKE zvantr-zvan_no,
END OF t_vanno.
select available van numbers
SELECT DISTINCT zvan_no FROM zvantr
INTO CORRESPONDING FIELDS OF TABLE t_vanno.
LOOP AT t_vanno.
select van id
SELECT SINGLE zvan_id FROM zvantr
INTO number_range-id
WHERE zvan_no = t_vanno-zvan_no.
select van description (maintained in pallet tables)
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_vanno-zvan_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_van_nos
*& Form select_data_down
select data if selecting from delivery down
FORM select_data_down.
select all deliveries from LIKP that fulfill selection criteria
Start SU01 optmization changes
SELECT vbeln vstel lgtor route wadat "RM050906
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp"MB01-+
WHERE vbeln IN s_vbeln
AND vstel IN p_vstel
AND lfart IN s_lfart
AND wadat IN s_wadat
AND lfdat IN s_lfdat "MB01+
AND
( lgtor IN s_lgtor OR zzroute2lgtor IN s_lgtor ) ."MB01+
IF sy-subrc NE 0.
no data found
MESSAGE i007.
EXIT.
ENDIF.
IF NOT t_likp[] IS INITIAL. "SUM
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln. "SUM
select sales document headers from VBUK
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp "SUM
WHERE vbeln EQ it_likp-vbeln. "SUM
SORT it_vbuk BY vbeln.
select all relevant delivery items from LIPS
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
select all sales document line items from VBUP
SORT it_lips BY vbeln posnr. "SUM
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT it_vbup BY vbeln posnr.
select corresponding handling unit ID's (venum)
TR03 Replace
start
select * from vepo appending corresponding fields of table t_vepo
for all entries in t_lips
where vbeln = t_lips-vbeln
and posnr = t_lips-posnr
and matnr = t_lips-matnr
and charg = t_lips-charg.
SELECT vepoVENUM vepoVEPOS vepovbeln vepoposnr
FROM vepo as vepo
INNER JOIN vekp as vekp ON vepovenum = vekpvenum
APPENDING corresponding fields of table it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vepo~vbeln = it_lips-vbeln
AND vepo~posnr = it_lips-posnr
AND vepo~matnr = it_lips-matnr
AND vepo~charg = it_lips-charg
AND vekp~exidv IN s_exidv.
SELECT venum vepos vbeln posnr
FROM vepo INTO TABLE it_vepo2
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
SORT it_vepo2 BY venum vepos.
*{ INSERT UKMK900355 1
Ice-multis: replace lower-level HUs with highest level " AS01
PERFORM replace_highest_hu. " AS01
*} INSERT
Start of changes by ANV SR#11523
MB01 - extract shipment header as well to populate leg indicator
Therefore, join vttp with vttk
Limit as well by transportation planning point
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
IF NOT it_vepo2[] IS INITIAL.
SELECT venum exidv
FROM vekp INTO TABLE it_vepo1
FOR ALL ENTRIES IN it_vepo2
WHERE venum = it_vepo2-venum
AND exidv IN s_exidv.
ENDIF.
SORT it_vepo1 BY venum.
CLEAR: w_vepo, it_vepo.
LOOP AT it_vepo1.
READ TABLE it_vepo2 WITH KEY venum = it_vepo1-venum.
IF sy-subrc = 0.
it_vepo2-exidv = it_vepo1-exidv.
MODIFY it_vepo2 TRANSPORTING exidv
WHERE venum = it_vepo1-venum .
ENDIF.
ENDLOOP.
DELETE it_vepo2 WHERE exidv IS initial.
it_vepo[] = it_vepo2[].
TR03 Replace end
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_down
*& Form select_data_up
select data if selecting from van/pallet up
FORM select_data_up.
IF NOT s_vanno IS INITIAL.
if van then select van numbers and hence pallet numbers
SELECT * FROM zvantr INTO TABLE t_vantr
WHERE zvan_no IN s_vanno.
and vstel eq p_vstel."TR01-
IF NOT t_vantr[] IS INITIAL.
SORT t_vantr BY zvan_id zvan_no vstel zpallet_no. "SUM
SELECT * FROM zpallettr INTO TABLE t_pallettr
FOR ALL ENTRIES IN t_vantr
WHERE zpallet_no EQ t_vantr-zpallet_no
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
ELSE.
otherwise can get pallet numbers directly
SELECT * FROM zpallettr INTO TABLE t_pallettr
WHERE zpallet_no IN s_palno
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
IF NOT t_pallettr[] IS INITIAL.
from the pallet nos. we can select the handling units
SORT t_pallettr BY zpallet_id zpallet_no vstel exidv. "SUM
SELECT * FROM vekp INTO TABLE t_vekp
FOR ALL ENTRIES IN t_pallettr
WHERE exidv EQ t_pallettr-exidv
AND exidv NE space
AND exidv IN s_exidv "TR03+
AND ( exida = 'E' "TR01+
OR exida = 'F' ). "TR01+
ENDIF.
SORT t_vekp BY venum. "SUM
IF NOT t_vekp[] IS INITIAL.
build vbeln range from t_vekp.
LOOP AT t_vekp.
r_del-sign = 'I'.
r_del-option = 'EQ'.
r_del-low = t_vekp-vpobjkey.
APPEND r_del.
ENDLOOP.
select all deliveries from LIKP that correspond to HU's
SELECT * FROM likp INTO TABLE t_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
ENDIF.
MB01- START
SELECT vbeln lgtor route wadat
FROM likp INTO TABLE it_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp
WHERE vbeln IN r_del
AND lfart IN s_lfart
AND wadat IN s_wadat "MB01-+
AND lfdat IN s_lfdat. "MB01+
MB01- END
ENDIF.
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln . "SUM
select sales document headers from VBUK
SELECT * FROM vbuk INTO TABLE t_vbuk
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln.
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln.
SORT it_vbuk BY vbeln. "SUM
select all relevant delivery items from LIPS
SELECT * FROM lips INTO TABLE t_lips
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln
AND pstyv NE 'ZPAC'
AND pstyv NE 'ZGDP' "TR02+
AND lfimg GT 0. "TR01+
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
SORT it_lips BY vbeln posnr. "SUM
select all sales document line items from VBUP
SELECT * FROM vbup INTO TABLE t_vbup
FOR ALL ENTRIES IN t_lips
WHERE vbeln EQ t_lips-vbeln
AND posnr = t_lips-posnr.
Start of changes by ANV SR#11523
MB01 - START
join vttp with vttk to obtain leg indicator
SELECT tknum tpnum vbeln
FROM vttp INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln.
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT t_vbup BY vbeln posnr. "SUM
select corresponding handling unit ID's (venum)
SELECT * FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE t_vepo
FOR ALL ENTRIES IN t_lips
WHERE vbeln = t_lips-vbeln
AND posnr = t_lips-posnr
AND matnr = t_lips-matnr
AND charg = t_lips-charg.
SELECT venum vepos vbeln posnr
FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
*{ INSERT UKMK900355 1
it_vepo2[] = it_vepo[]. " DS01
PERFORM replace_highest_hu. " DS01
it_vepo[] = it_vepo2[]. " DS01
*} INSERT
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_up
*& Form move_to_table
move data to processing table
FORM move_to_table.
LOOP AT it_vepo.
CLEAR t_data_tab.
delivery lines.
CLEAR w_lips.
READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_lips BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_lips TO t_data_tab.
sales document line items
CLEAR w_vbup.
READ TABLE it_vbup WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_vbup BINARY SEARCH. "SUM
if w_vbup-kosta = space. "TR01-
not relevant for picking
delete t_vepo. "TR01-
continue. "TR01-
else. "TR01-
MOVE-CORRESPONDING w_vbup TO t_data_tab.
endif. "TR01-
sales doc header
CLEAR w_vbuk.
READ TABLE it_vbuk WITH KEY vbeln = it_vepo-vbeln
INTO w_vbuk BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_vbuk TO t_data_tab.
delivery header
CLEAR w_likp.
READ TABLE it_likp WITH KEY vbeln = it_vepo-vbeln
INTO w_likp BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_likp TO t_data_tab.
MB01 - START
DATA: w_routetype TYPE i. "0=non-global,1=1st route,2=2nd
route,3=both
At this point move DOOR2 if it falls within the global route scenario
and the door2 is satisfies the selection criteria for door
1. Does delivery fall within global route scenario
CLEAR w_routetype.
IF w_likp-zz2route = 'Y' .
1.a. First route - does door1 satisfy the selection criteria
IF w_likp-lgtor IN s_lgtor.
w_routetype = 1.
MOVE w_likp-zzexproute TO t_data_tab-route.
1.b. Second route - does door2 satisfy the selection criteria
ELSEIF w_likp-zzroute2lgtor IN s_lgtor.
here we need to move door2 to lgtor
w_routetype = 2.
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
ENDIF.
If both routes satsify the criteria, append for 2nd leg ***REVISIT!
IF w_likp-lgtor IN s_lgtor AND w_likp-zzroute2lgtor IN s_lgtor.
w_routetype = 3.
ENDIF.
ENDIF.
MB01 - END
Start of changes by ANV SR#11523
MB01 - If the delivery falls within the global route scenario... need
to select either preliminary shipment leg OR subsequent leg
when laufk= 1 (prelim) and linked to route1, if laufk = 2 (subseq) &
linked to route2
Shipment Number
SORT it_vttp BY vbeln laufk.
CLEAR w_vttp.
CASE w_routetype.
WHEN 0.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
INTO w_vttp BINARY SEARCH.
WHEN 1.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '1'
INTO w_vttp BINARY SEARCH.
WHEN 2.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
WHEN 3. "REVISIT
ENDCASE.
MOVE w_vttp-tknum TO t_data_tab-tknum.
MB01 - END
End of changes by ANV SR#11523
select handling unit info using vepo entry
CLEAR w_vekp.
IF t_vekp[] IS INITIAL.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = it_vepo-venum.
ELSE.
READ TABLE t_vekp WITH KEY venum = it_vepo-venum
INTO w_vekp BINARY SEARCH. "SUM
IF sy-subrc NE 0.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = t_vepo-venum.
ENDIF.
ENDIF.
MOVE-CORRESPONDING w_vekp TO t_data_tab.
*{ INSERT UKMK900355 2
WM status for HU "AS03
SELECT SINGLE * FROM zhu_to_link WHERE lgnum EQ w_vekp-lgnum"AS03
AND exidv EQ w_vekp-exidv."AS03
IF sy-subrc EQ 0. "AS03
IF zhu_to_link-zpick_comp EQ space. "AS03
t_data_tab-lvsta = 'B'. "AS03
ELSE. "AS03
t_data_tab-lvsta = 'C'. "AS03
ENDIF. "AS03
ENDIF. "AS03
*} INSERT
select pallet / van load information "Jvdm01-
SELECT SINGLE zpallet_no zcount_check FROM zpallettr "Jvdm01-
INTO (t_data_tab-zpallet_no, "Jvdm01-
t_data_tab-zcount_check) "Jvdm01-
WHERE exidv EQ w_vekp-exidv. "Jvdm01-
PERFORM read_pallet. "MB01+
SELECT SINGLE zpallet_no zcount_check zdep_point "Jvdm01+
FROM zpallettr "Jvdm01+
INTO (t_data_tab-zpallet_no, "Jvdm01+
t_data_tab-zcount_check, "Jvdm01+
t_data_tab-zdep_point) "Jvdm01+
WHERE exidv EQ w_vekp-exidv. "Jvdm01+
WHERE exidv EQ w_vekp-exidv "MB01-+
AND zpallet_id = t_data_tab-lgtor."MB01+
MB01 - INSERT START
If pallet number specified and
we are in the global route scenario & both doors fall within the
selection criteria, we need to copy the one that is currently in a
specified pallet
IF NOT s_palno IS INITIAL AND not t_data_tab-zpallet_no in s_palno
AND w_routetype = '3' .
Switch doors & get 2nd shipment
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
Read subsequent leg shipment
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
IF sy-subrc = 0.
MOVE w_vttp-tknum TO t_data_tab-tknum.
ENDIF.
PERFORM read_pallet. "MB01+
ENDIF.
MB01 - INSERT END
IF NOT t_data_tab-zpallet_no IN s_palno. "TR01+
CONTINUE. "TR01+
ENDIF. "TR01+
IF sy-subrc = 0. "mb01+
perform read_van. "MB01+
SELECT SINGLE zvan_no zvan_print zeod_print FROM zvantr
INTO (t_data_tab-zvan_no,
t_data_tab-zvan_print,
t_data_tab-zeod_print)
WHERE zpallet_no EQ t_data_tab-zpallet_no.
MB01 - INSERT START
If van number specified and
we are in the global route scenario & both doors fall within the
selection criteria, we need to copy the one that is currently on a
specified van
IF NOT s_vanno IS INITIAL AND not t_data_tab-zvan_no in s_vanno AND
w_routetype = '3' .
Switch doors & get 2nd shipment
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
Read subsequent leg shipment
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
IF sy-subrc = 0.
MOVE w_vttp-tknum TO t_data_tab-tknum.
ENDIF.
PERFORM read_pallet. "MB01+
perform read_van.
ENDIF. "mb01-
MB01 - INSERT END
IF NOT t_data_tab-zvan_no IN s_vanno. "TR01+
CONTINUE. "TR01+
ENDIF. "TR01+
ENDIF.
APPEND t_data_tab.
ENDLOOP.
*-----> TR01+ start
If the delivery has yet to be packed, then need to include in report
Thus delete t_lips here and if any entries left after looping through
t_vepo, these will also need to be added to t_data_tab
if the selection is by handling unit though we do not want
these"TR03+
IF s_exidv IS INITIAL. "TR03+
*{ REPLACE UKMK900355 1
*\ LOOP AT it_vepo.
*\ READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
*\ posnr = it_vepo-posnr
*\ BINARY SEARCH. "SUM
*\ IF sy-subrc = 0.
*\ DELETE it_lips INDEX sy-tabix.
*\ ENDIF.
*\ ENDLOOP.
Higher-level HUs can contain more than one delivery item " AS01
LOOP AT it_lips. " AS01
READ TABLE t_vepo_low WITH KEY vbeln = it_lips-vbeln " AS01
posnr = it_lips-posnr. " AS01
CHECK sy-subrc EQ 0. " AS01
DELETE it_lips. " AS01
ENDLOOP. " AS01
*} REPLACE
IF NOT it_lips[] IS INITIAL.
move any unpacked items to the data table
PERFORM move_lips_to_table.
ENDIF.
ENDIF. "TR03+
*<---- TR01+ End
get relevant status icons
PERFORM select_icons.
prepare ALV data
PERFORM prepare_alv.
ENDFORM. " select_data
*& Form select_icons
select icons for display and move data to display table
FORM select_icons.
DATA: w_disp_tab LIKE zpickdisp,
w_disp_head LIKE zpickhead,
w_color LIKE zpickdisp-color,
ov_icon LIKE zpickdisp-ov_icon,
gi_icon LIKE zpickdisp-gi_icon,
to_icon LIKE zpickdisp-to_icon,
lp_icon LIKE zpickdisp-lp_icon,
pc_icon LIKE zpickdisp-pc_icon,
lv_icon LIKE zpickdisp-lv_icon,
vm_icon LIKE zpickdisp-vm_icon,
em_icon LIKE zpickdisp-em_icon,
sp_icon LIKE zpickdisp-sp_icon, " ANV SR#11523
t_ovst_tab LIKE t_disp_tab WITH HEADER LINE.
CONSTANTS: c_col1(3) VALUE 'C10',
c_col2(3) VALUE 'C20'.
SORT t_data_tab BY lgtor vbeln.
w_color = c_col2.
LOOP AT t_data_tab.
AT NEW lgtor.
fill ALV header table
CLEAR w_disp_head.
w_disp_head-lgtor = t_data_tab-lgtor.
APPEND w_disp_head TO t_disp_head.
ENDAT.
goods issue status & overall amber/green only
CASE t_data_tab-wbstk.
WHEN c_c.
MOVE icon_green_light TO gi_icon.
MOVE icon_green_light TO ov_icon.
WHEN OTHERS.
MOVE icon_red_light TO gi_icon.
MOVE icon_yellow_light TO ov_icon.
ENDCASE.
transfer order status
CASE t_data_tab-lvsta.
WHEN c_a.
MOVE icon_red_light TO to_icon.
WHEN c_b.
MOVE icon_yellow_light TO to_icon.
WHEN c_c.
MOVE icon_green_light TO to_icon.
WHEN space.
write N/A
to_icon = 'N/A'.
ENDCASE.
loaded to pallet status
IF NOT t_data_tab-zpallet_no IS INITIAL.
MOVE icon_green_light TO lp_icon.
ELSE.
MOVE icon_red_light TO lp_icon.
ENDIF.
pallet count status
IF NOT t_data_tab-zcount_check IS INITIAL.
MOVE icon_green_light TO pc_icon.
ELSE.
MOVE icon_red_light TO pc_icon.
ENDIF.
loaded to van status
IF NOT t_data_tab-zvan_no IS INITIAL.
MOVE icon_green_light TO lv_icon.
ELSE.
MOVE icon_red_light TO lv_icon.
ENDIF.
van manifest status
IF NOT t_data_tab-zvan_print IS INITIAL.
MOVE icon_green_light TO vm_icon.
ELSE.
MOVE icon_red_light TO vm_icon.
ENDIF.
Start of changes by ANV SR#11523
Shipment status
IF NOT t_data_tab-tknum IS INITIAL.
MOVE icon_green_light TO sp_icon.
ELSE.
MOVE icon_red_light TO sp_icon.
ENDIF.
End of changes by ANV SR#11523
end of day manifest status
IF NOT t_data_tab-zeod_print IS INITIAL.
MOVE icon_green_light TO em_icon.
ELSE.
MOVE icon_red_light TO em_icon.
ENDIF.
move working data table to display table
MOVE-CORRESPONDING t_data_tab TO w_disp_tab.
w_disp_tab-ov_icon = ov_icon.
w_disp_tab-gi_icon = gi_icon.
w_disp_tab-to_icon = to_icon.
w_disp_tab-lp_icon = lp_icon.
w_disp_tab-pc_icon = pc_icon.
w_disp_tab-lv_icon = lv_icon.
w_disp_tab-vm_icon = vm_icon.
w_disp_tab-em_icon = em_icon.
w_disp_tab-sp_icon = sp_icon. "ANV SR#11523
w_disp_tab-color = w_color.
fill N/A values for initial fields for display
IF w_disp_tab-packvorschr IS INITIAL.
w_disp_tab-packvorschr = 'N/A'.
ENDIF.
IF w_disp_tab-exidv IS INITIAL.
w_disp_tab-exidv = 'N/A'.
ENDIF.
IF w_disp_tab-zpallet_no IS INITIAL.
WRITE 'N/A' TO w_disp_tab-zpallet_no.
ENDIF.
IF w_disp_tab-zvan_no IS INITIAL.
WRITE 'N/A' TO w_disp_tab-zvan_no.
ENDIF.
display different color for new doc number
AT END OF vbeln.
IF w_color = c_col1.
w_color = c_col2.
ELSEIF w_color = c_col2.
w_color = c_col1.
ENDIF.
ENDAT.
APPEND w_disp_tab TO t_disp_tab.
CLEAR w_disp_tab.
ENDLOOP.
we have all the icons in display but need to check the overall status
as this refers to the line items
green and amber statuses already set and use the same criteria as the
goods issue status unless detected as red here
DATA: ov_stat_red(1).
CLEAR w_disp_tab.
SORT t_disp_tab BY vbeln.
LOOP AT t_disp_tab INTO w_disp_tab.
AT NEW vbeln.
check all line items for delivery
LOOP AT t_data_tab WHERE vbeln = w_disp_tab-vbeln.
IF t_data_tab-lvsta = c_a.
set overall status to red
ov_stat_red = c_yes.
EXIT.
ELSE.
leave green/amber status icon as previosly determined
ENDIF.
ENDLOOP.
IF ov_stat_red = c_yes.
set overall status to red for all items in that delivery
CLEAR ov_stat_red.
MOVE icon_red_light TO w_disp_tab-ov_icon.
MODIFY t_disp_tab FROM w_disp_tab TRANSPORTING ov_icon
WHERE vbeln = w_disp_tab-vbeln.
ENDIF.
ENDAT.
ENDLOOP.
ENDFORM. " select_icons
*& Form fill_layout
fill ALV layout parameters
FORM fill_layout.
CLEAR g_layout.
g_layout-colwidth_optimize = c_yes. " column width optimisation
g_layout-zebra = space. " alternate line colors
g_layout-box_fieldname = 'MARK'. " checkbox fieldname
g_layout-info_fieldname = 'COLOR'. " highlight row indicator
g_layout-no_vline = space. " vertical line
g_layout-key_hotspot = space. " hotspot field
g_layout-f2code = 'PICK'. " F2 ok_code
g_layout-numc_sum = c_yes. " sum numc fields
g_layout-box_tabname = 't_disp_head'. " checkbox table name
g_layout-expand_fieldname = 'EXPAND'. " expand field name
ENDFORM. " fill_layout
*& Form fill_sort
fill ALV sort table
FORM fill_sort.
DATA: w_g_sort TYPE slis_sortinfo_alv.
w_g_sort-spos = 1.
w_g_sort-fieldname = 'LGTOR'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
APPEND w_g_sort TO g_sort.
w_g_sort-spos = 2.
w_g_sort-fieldname = 'VBELN'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
APPEND w_g_sort TO g_sort.
w_g_sort-spos = 3.
w_g_sort-fieldname = 'POSNR'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
APPEND w_g_sort TO g_sort.

Spare parts - LCD display for HP OMNI27

Hi,
2 years ago I bought a HP Omni 27-1000eb, about 3 months ago I noticed some troubles with the 27" display (non touch).
It starts buzzing (comes out of the bottom of the screen) and then shuts down while the PC continues functioning normally.
I have to (hard)restart the pc to use the display again otherwise I will never get the screen up and running again. It seems like the display fails to stay on, or maybe a malfunction.
Display drivers and graphic drivers ok.
Does someone know about this problem?
Should I replace the display? if yes...where can I find such a sparepart.
regards

Hello @Neoburn,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues with your HP Omni 27-1000eb Desktop PC where you have to hard reset the computer to get it working again as the monitor part shuts down and the computer part stays running. The issue you are describing appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

HELP ! LCD DISPLAY IS ONLY BLACK AND WHITE ???

Currently using a macbook pro, on startup the boot up screen is in colour, but when in the operating system everything becomes black and white, have tried all display settings can anyone shed some light on the situation ?
Regards
Marshy

Open the Universal Access pane of System Preferences, click on the Seeing tab, turn off White on Black, and drag the Contrast slider all the way to the left.
(51583)

Default color is displayed for time, cellular and battery status‏‏

Hi all.
I'm using non-default background color for my page. Time, cellular, battery status have default color (system theme). How can I change this color?
I wrote in Page.xaml:
<Page
Background="#FFE5E9EC"
Foreground="#FF000000"
/>
But it doesn't work.
My example:
Skype example:

Set ForegroundColor property of StatusBar. Try following code
StatusBar statusBar = StatusBar.GetForCurrentView();
statusbar.ForegroundColor = Colors.Black;
https://msdn.microsoft.com/en-us/library/windows.ui.viewmanagement.statusbar.foregroundcolor.aspx
Gaurav Khanna | Microsoft .NET MVP | Microsoft Community Contributor

One 30" or Two 24" Displays for Logic 9?

Hi, would it be preferable to have one 30", or two 24", LCD displays for Logic 9 use specifically?
The views, or windows (not sure what Logic calls them) will be mainly for audio/midi tracking, audio/midi editing, VI tracking and mixing of rock music. I may occasionally also need to tweak an effects plugin during mixdown.
I understand Logic can take advantage of dual displays. Can it have the "track" window on one display and the "mixer" window on the 2nd display?
Thanks for your advice!

Yeah - I'd have 2 x 24" over 1 x 30" anyday (24" is pretty big anyway). As SC said, you can have your mixer etc on the other one and you can permanently see what's going on. Also you can send movies to the other screen which is great if you score to picture. Definitely take time to set up screensets, it'll speed up your workflow massively.
I've just set this up myself and I'm very pleased with it apart from the fact that at the moment, I open a plugin from the mixer and it opens in the other screen. Not sure why it's doing that but I'm sure there'll be a workaround (any ideas sampleconstruct?).
Anyway, go for it.

LCD Displays for T20, T21, and T23

Similar Messages

Maybe you are looking for