LCD list needs to be upgraded.

My problem is I don't know what the message means. I push the buttons for a scan. The "scanning" box appears on my screen, then a box with the message "LCD list needs to be upgraded." It then gives me a box divided in half, with instructions on the left that can be added to or subtracted from the right. Nothing I do here makes any difference. All I want to do is scan a document to a file. Does anyone know how to fix this?

Hi,
Scanning from the front panel is not supportes for Chrome OS, a such require an HP software which does not exists for Chrome OS as this is a cloud based OS.
You may get basic scan functionality using the printer's EWS page.
From the printer click the setup (wrench) button and select Network, then select Network Configuration and locate the listed IP address for the printer.
Type that IP into Google Chrome, the printer home page (EWS) appears.
Click the Scan tab and use that Webscan iterface for scanning, that will allow basic scan functionality from your printer.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • LCD list need to be upgraded.

    It does not scan and a window opens saying that LCD list needs to be updated. What is that?

    Hi,
    Scanning from the front panel is not supportes for Chrome OS, a such require an HP software which does not exists for Chrome OS as this is a cloud based OS.
    You may get basic scan functionality using the printer's EWS page.
    From the printer click the setup (wrench) button and select Network, then select Network Configuration and locate the listed IP address for the printer.
    Type that IP into Google Chrome, the printer home page (EWS) appears.
    Click the Scan tab and use that Webscan iterface for scanning, that will allow basic scan functionality from your printer.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • When I scan a document to my computer,it tells me my LCD list needs to be updated. What is this?

    I have an HP photosmart printer wirelessly conected to HP computer,with windows 7. Error message LCD list needs to be updated.

    Hi Brian371,
    Try going to this link to help with your issue, if that doesn't help please repost.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • LCD List Needs Updated

    I have a HP OfficeJet 6500 709 and when I try to scan from the printer, it brings up an error message stating that the LCD list needs to be updated.  Is there a fix?

    Try Restart and reset
      Restart your computer.
    With the product turned on, unplug the power cord from the back of the product.
    Unplug the power cord from the electrical outlet.
    Wait 15 seconds.
    Reconnect the power cord to the product, and then reconnect the power cord to the electrical outlet.
    If the product does not automatically turn on, press the Power button ( ).
    Wait a couple of minutes to make sure that the product is ready, and then try scanning again from the product control panel.
    nodnerb

  • Upgrade LCD List

    When I attempt to scan to a PC, I receive a dialog on said PC that says:
    Upgrade LCD list
    LCD List needs to be upgraded.
    Hitting the OK button brings up a "Scan To...Setup (Front Panel List) dialog. It tells me that I can add Scan Shortcuts to the front panel list. Interestingly enough, i don't see any of the items in the 'Front panel list (Scan To button)' area actually on my lcd display. Selecting 'Update the Device' just closes the dialog, and nothing happens. What gives? The 'Manage Scan Shortcuts' doesn't help either: it doesn't do anything at all.
    This question was solved.
    View Solution.

    Hi,
    Close HP Digital Imaging Monitor which is running in the system tray where you see system clock. Open Services.msc and for the following services, STOP and START them:
    1)HP CUE Device Discovery
    2)hpqcsx08
    3)PML driver
    4)Net Driver HPZ12
    One or more entries may not be listed. Now open C:/Program Files/HP/Digital Imaging/bin and double click the file hpqtra08.exe. This will run HP Digital Imaging Monitor which will be visible in the system tray.
    After one minute, turn OFF the printer and unplug the power cable. Wait for 2 min. Reconnect the power cable and turn ON the printer. Wait till the printer is completely turned ON and do not press any buttons. You might get message saying "Updating Device".
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Can't see my apps listed in itunes, before upgrading it works ok

    Can't see my apps listed in itunes, before upgrading it works ok

    Christine has the right answer for you.
    There are two different services in play here. iTunes in the a Cloud and iTunes Match. Neither one requires the other.
    iTunes in the Cloud is a service of the iTunes Store which allows you to re-download your past purchases. iTunes 11 integrates this service directly into the iTunes browser so you can see any past purchases not on your computer or not hidden in the purchase history. However, the option to see these purchases sometimes gets turned off in the prefs if the Internet connection is interrupted and you need to re-enable it.

  • Have old Power Mac G4, need advice on upgrading the operating system

    Hello. Glad I found this forum. Wish it was prominently advertized on the Apple home page. Anyway, I have an old Power Mac G4 running OS X 10.0.4. Well, actually, I've always run it in OS 9.2. In fact recently I started playing with it again and switched it to OS X 10.0.4 and it seems to be unstable. The display dissappears after a while running. The machine is not off, just no display. Hitting the smaller reboot button brings it back up, only to have it repeat the failure. But that's not really my question. I want to use this machine as a Skype phone and for iMovie in OS 9.2. Skype is only available for OS X 10.3.9 and later OS's. So, if it's not a major hassle and expense, I want to upgrade to OS X 10.3.9 or later. That's where I need some advice. Having never attempted such a project, I'd like as much feedback as I can get about what to expect going in. Here are some questions:
    1. Will I still be able to run OS 9.2 (either concurrently or by switching the startup disk when needed) if I upgrade to OS X 10.3.9 or later?
    2. Will this instability with OS X 10.0.4 dissappear if I uprgade?
    3. Where can I find the appropriate upgrade software?
    4. Can I jump from OS X 10.0.4 to a version as late as OS X 10.3.9 without any intermediate steps, and without creating all kinds of little inconsistencies that I will have to chase down to make it work right in day to day use.
    If I get answers to all that, I'll be blown away by the spirit of helpfulness on this forum! But anything you can offer will be greatly appreciated. I don't really want to do anything fancy with the machine, just Skype, hopefully iMovie and maybe stream some TV programs if all goes well. Thanks for reading through all this and for anything you can offer.
    Power Mac G4
    Hard drive: 38.34 GB
    Built-in Memory: 384 MB
    OS 9.2 & OS X 10.0.4

    appleysmappley:
    Cornelius, clearly you know your Macs!
    Thank you. I have great mentors, one of whom is Kappy.
    My next question about OS 9 is, if I have to wipe the hard drive, will the Panther retail box I buy include OS 9 or will I need to somehow add it from the original software pack I have after installing Panther?
    You have options.
    1. You can choose to install Panther using the Archive and Install option, which will leave OS 9 untouched. However, since you currently have OS X 10.0.4 on your drive, I think a complete reformat, erase and reinstall is advisable.
    2. You can copy your OS 9 Systems Folder, OS 9 Applications Folder and any data you have have to a USB jump drive, or CD or an external Hard Disk Drive and restore it after Panther or Tiger is installed.
    3. You can install OS 9 from scratch. We will give you step by step directions for doing it.
    I'm assuming I can't use the disks that came with my laptop to updgrade my Power Mac G4, right?
    It may or may not work. However, the Apple Software License Agreement stipulates that unless you have a multiple user license, the OS can only be installed on one computer at a time.
    I'm concerned about OS 9 is because I want to be able to run the OS 9 iMovie that I have on the Power Mac G4 now.
    If you reinstall OS 9, that should be included. OS X also has iMovie, although I am not sure if it is included in the Retail Version. You can also purchase iLife which will include iMovie and other apps.
    What are the potential pitfalls of buying a copy on eBay? What do I need to know to "know what I'm looking for"? What questions should I ask?
    The pitfalls are many. There is fraud on eBay (elsewhere, too, I guess), so you want to be sure you get a reputable seller. You want to be sure that you are getting the Full Retail Version, not computer specific gray disks or upgrade installers. You should ask the seller, in addition, whether you can return the merchandise for a refund if it does not work on your computer. Most reputable sellers want to satisfy their buyers and their business depends on their reputation.
    Kappy said I would need more RAM (I have 384 MB). Where would you recommend buying that?
    Your computer will support a total of 1.5 GB of PC-133 3.3v, unbuffered, 8-byte, non-parity 168-pin SDRAM in 3 slots. You currently have a 128 MB and 256 MB modules in two slots. You can remove one or both and add two or three 512 MB modules. Check out the list of vendors and prices at ramseeker
    Good luck.
    cornelius

  • I upgraded my Iphone, but now I can't connect it to itunes because it is not upgraded. However, when I want to upgraded, it says that my computer (imac)  needs to be upgraded to another version. I can't find anything to help me out.

    I upgraded my Iphone to IOS6, but now I can't connect it to itunes (10.6.3) because it is not upgraded. However, when I want to upgraded, it says that my computer (imac Mac OS 10.5.8)  needs to be upgraded to another version. I can't find anything to help me out.

    You need iTunes 10.7 or later.
    To get this, you need Mac OS 10.6.8 or later.
    You can get 10.6 Snow Leopard here -> http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?!

    When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!

    hello, it sounds like the library is damaged.
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 

  • After upgrading to Yosemite, iphoto has a white symbol across it indicating it needs to be upgraded. When at the app store the install option is not available?

    After upgrading to Yosemite, iphoto has a white symbol across it indicating it needs to be upgraded. When at the app store the install option is not available?

    What version of iPhoto do you have?
    iPhoto Upgrade under Mavericks    see post by Old Toad

  • Can't open iphoto library needs to be upgraded

    can't open iphoto a message window opens and asks to upgrade or quit   The message states that photo library needs to be upgraded to work with this version of iphoto

    Then you're going to have to upgrade.
    Make a back up first, of course.

  • Need help with upgrading my OS from 10.5.8

    Need help with upgrading my OS. I havent upgraded the OS since I bought it and have version 10.5.8. Now I cant download Mountain Lion- or even Snow Leopard. When i downloaded the first version of SL- 10.6.1 it says i have to have 10.6 first and I cant find that.

    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    Whilst Apple withdrew Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs.  You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/
    If you are outside the US call your national Apple Helpline:
    http://support.apple.com/kb/HE57
    If you're in the UK, use this number: 0871 508 4400
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
    UPDATE:
    OS 10.6 Snow Leopard is once again available from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    To use iCloud you have to upgrade all the way to Mountain Lion:
    http://support.apple.com/kb/HT4759

  • Need help regarding upgrading Oracle 10g Forms to Oracle 11g Fusion Middlew

    Hi All,
    I am trying to create a workshop on a VM for showing the migration / upgrading of Oracle Forms 10g to Oracle 11g FMW using the Upgrade Assistant tool available in <ORACLE_HOME>/bin/ua.bat.
    As per my understanding of pre-requisites:
    1)     I need to install Oracle SOA Suite 10g on my VM.
    2)     I also need to install Oracle SOA Suite 11g on my VM.
    3)     I need to install Oracle Forms/Reports Services 10g on my Oracle SOA Suite 10g installation.
    4)     I need to run Oracle Forms/reports installer on my Oracle SOA Suite 11g installation.
    5)     I need to run upgrade assistant tool on my VM to upgrade my form from source(Oracle SOA Suite 10g) to destination(Oracle SOA Suite 11g). Is it mandatory for this migration that I should have Oracle SOA Suite 10g and Oracle SOA Suite 11g on the same system ?
    Having all these software installed on one VM would be difficult. So just wanted to check can I avoid any software to install on VM ?
    If there is any alternative suggestion then please let me know.
    Regards,

    What do you want to do with the SOA-suite? At least for Froms10G is is not necessary.

  • I have a mac, In"Design CS 5.5, a design gave me a file said it was CS 6, does not open in CS 5.5..Message says "Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign."  I think I need to buy upgrade fro

    I have a mac, In"Design CS 5.5, a design gave me a file said it was CS 6, does not open in CS 5.5..Message says "Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign."  I think I need to buy upgrade from 5.5 to 6. I found one on NextTechDirect for $150 to download. they are not a scam according to "scamadvisor.com."
    When I drag the InDesign file that that was supplied by another designer who said it was  CS 6 onto my desktop it says CS 5.5. Is that because I only have CS 5.5?
    Should I buy this
    Adobe InDesign CS6 Upgrade from CS5.5 WIN/MAC [Download] from Next tech....it is obviosly higher on the adobe site and alot of other places?

    No one is likely to recommend where you buy your software from other than Adobe in these forums... not so much because of support for Adobe, but mostly because of lack of support/knowledge of any third party vendors.  I only know from experience that when you invest in bargain pricing you usually get what you pay for.

  • When trying to open iPhoto the computer says: 'The photo library needs to be upgraded to work with this version of iPhoto.'  So I click 'upgrade' Then it says: 'You can't open your current photo library using this version of iPhoto.' Etcetera...

    When trying to open iPhoto the computer says:
    ‘The photo library needs to be upgraded to work with this version of iPhoto.’
    So I click ‘upgrade’
    Then it says: ‘You can’t open your current photo library using this version of iPhoto.’
    Etcetera...
    What to do??
    Theo

    Is your Apple Intel-based, poppelmacbook?  If not, you should consider treating yourself to a new Mac. Last December I gave up my old because it just could not update...anything because it was not Intel-based.  Updating everything on this OS to 10.9 has been confusing for me, but I just could not work with that old Mac because the updates were too smart? for my 10.6.  It is upstairs now...for visiting family:  games, garage band, etc.--things I never did use.  Apple refurbished and purchase the extended warranty.  Apple loyalist since late 1980's.

Maybe you are looking for