LCD screen 6600 slide

i was wondering if someone could help me i have had my 6600 slide for 2 months and i just got a new lcd screen put in and i have had it back 3 days and it has gone again. is anyone else having this problem?
thanks

I am having the same problems with my 6600 slide, which I got in early November - it started with the bright light going out when it's closed, then it stopped being bright when it's open or closed. I've powered off, removed the battery and now I occasionally get a black screen, or reversed colors. Sometimes I get fuzzy psychodelic colors and some times the screensaver image shows up partially below and above or the image shifts, as if its on a slideshow, stuck repeating itself halfway.
I'm going to send mine to Asia's customer care, because I purchased in Hong Kong and when I had called USA tech support, they do not support Asia purchased mobiles. Regardless, this is the same company worldwide and an Asia or US warranty should be covered worldwide. Are you telling me that I need a new LCD screen? So is that under warranty since my phone is only 4 months old!
I'm ready to purchase a new phone.

Similar Messages

Can not use TOUCH function on Nokia 6600 slide

Can not use TOUCH function on Nokia 6600 slide-
turned on sensor in phone settings, but when i touch the PHONE it does not work.
Please, tell me how use this function or maybe my phone is out of order

As long as your Sensor Settings are On within Menu, Settings, Phone, Sensor Settings then you just need to do the following -
Tapping
The tap function allows you to quickly
mute and reject calls and alarm tones, and
to display a clock just by double-tapping
the back or front of the phone when the
slide is closed.
Select Menu > Settings > Phone >
Sensor settings to activate the tap
function and vibration feedback.
Mute calls or alarms
Double-tap the phone.
Reject a call or snooze an alarm after
muting it
Double-tap the phone again.
Display the clock
Double-tap the phone.
(If you have missed calls or received new
messages, you must view them before you
can see the clock.)
Simply, if you double tap the screen when the slide is closed and you can see the clock appear then it is working.
I hope this makes it clearer for you.
Full Manual here - http://nds1.nokia.com/phones/files/guides/Nokia_6600_slide_UG_en.pdf

Unable to renew Nokia Maps license, 6600 Slide, SW...

Please can anyone help,. I have a Nokia 6600 Slide with the latest software (V6.55). I was successfully using Nokia Maps GPS navigation having purchased a license key for UK/Ireland in January 2011. I have an external bluetooth GPS device. Howver, the Maps license key has now expired (as expected, it was a 1-year licence). Without a license I cannot use the voice-guided navigation function.
When I go throoug the phone menus to purchase a 1-year license again, I get to the menu that asks which payment method I wan to use (I select Visa). At this point the screen just refreshes, with no message or error code. I am not asked for payment card details. I cannot get past the "payment method" menu.
This process worked just fine for me in Jan 2011 when I first purchased a license, and other web browing functions using the built-in web browser are just fine. I have tried refreshing the Nokia software (It was already at V6.55, which is the latest level).
I would appreciate any hints or tips as I really miss my in-car GPS navigation.

sictransit wrote:
I have an external bluetooth GPS device.
This is the bit that worries me as since Nokia stoped marketing their own Bluetooth GPS receiver support for devices without Integrated GPS has been steadily disappearing from firmware updates.
I last purchased a 1 yr. navigation license for my N95 in November 2011 via credit card.
Happy to have helped forum with a Support Ratio = 42.5

Pls advise 6600 slide

hi all,
pls help on my 6600 slide. just got this phone yesterday. but it's out of my expectation. there's a func tapping, but it seems not working at all when i tap on the screen twice or either behind the phone. i had follow on the manual to close the slide also but it's not working also. do any1 know how this works? is it possible to upgrade the firmware to fix this prob?
another thing is the camera mode. from the screen it seems fade and not clear at all but after u capture, the picture became clear. why this happen? tried to play around the settings but it's not work. well not so satisfied bout this phone. any1 know how to fix this 2 prob?
many thanks ahead.

try to reset your phone to factory settings, if this does not work, try taking your phone to your local Nokia Care Centre for them to look at it. i am not sure but since it is a newish phone it may not have firmware updates out for it yet so Nokia Care Centre is your best bet, as you may have a defective/faulty handset

Iphone LCD screen dead spot

Hey I have an iphone that I got from a friend as a gift never activated it but it seem as though it has dead spots how do I replace the LCD screen and will apple take it back. I don't know, I had it for a while without even looking at because to be honest I liked my blackberry. So how do I go about getting this fix; do I have to pay extra to get this fix or is it unfixable. I don't have a reciept and my friend didn't keep it. So should I bother with this phone because I'm not going to activate or bother signing up for a plan if this thing isn't going to work.

I've had my iPhone since August with no problems. I love it. Just this morning the very bottom part of the touch screen became unresponsive. The rest of the screen is fine. It's like the sensor in just that part of the screen has gone dead for some reason. Of course this also happens to be the part of the screen where you "slide" to answer a call, and also access the phone, mail, safari, and iPod icons. Also the "slide" to unlock the phone is located in this area. Basically this malfunction has rendered my iPhone unusable. I have turned it off and on, and also reset and restored it through iTunes. None of that works. It appears to be a hardware issue and not software. I wonder if this is a problem that will occur widespread in iPhones after several months use, or if my problem is somewhat isolated?
I'm frustrated as EVERYTHING is on my iPhone. I have an appointment tomorrow at the Genius Bar to have it checked out. Thank goodness I'm near an Apple store or I would be even more frustrated. I also have everything updated and saved on iTunes so it will be easy to personlize my iPhone again once the problem is fixed.
Ernie

My LCD screen burned out. I have it connected to a tv now, but can't get the menu bar or the function bars to show up. Please help!

My LCD Screen burned out, but the computer still works. I currently have it connected to an HDTV via, Mini DVI to VGA, VGA to VGA on the tv. Problem is, I can't get the function bar (maybe not the right term) or the bar at the bottom with all my programs on it. I get my screen saver and have managed to drag (by sheer luck since I can't see anything on my iMac screen) some of my pics I had on my desktop over, but nothing else. Please help!

Hello
you should have on your key board "mirroring key" , or F7 on old keyboard
for now your tv is an extended screen for your imac not a miror , so you can not see menue barre on top of screen
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8525.html
HOPE you are in 10.6
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8525.html
"On some keyboards, you can press the F7 key, or Command-F1, as a shortcut to turn video mirroring on or off."
HTH
Pierre

How can I put Desktop 1 to my macbook and Desktop 2 on LCD screen?

Hello. I have a problem. I would like to use some of my programs on Desktop 1, and other on my Desktop 2 for example not just to put browser to LCD screen. Is that possile or am I asking for too much?
Thank's. [I'm new to apple world]

What kind of DVD? Is this a commercial/copyright protected DVD? If so, since doing so is illegal in the US, such cannot be discussed here.

How do i fix my ipod touch 4g? on my lock screen my (slide to unlock) wont move when i run my finger over it.

how do i fix my ipod touch 4g? on my lock screen my (slide to unlock) button wont work when i slide my finger over it.

Turn off, and then turn on your iPod. Restart it

How can you tell if you need to just replace the glass on an ipod 4g or the glass and the LCD screen?

i just broke my ipod touch 4g about a month ago and i think it is just the glass but i am not sure. It cracked and the glass started falling out of the top right corner and today, the white part started cracking. is this just part of the glass or is it part of the LCD screen? I want to figure this out because i dont want to order a repair kit with an LCD screen if i dont have to. thanks in advanced

On the 4G the outer glass and the LCD screen is one bonded unit.
iPod Touch Repair – iFixit

How do i connect an ipod lcd screen to a zen visio

My zen vision m lcd screen recently cracked and after getting the full run around and reading up on the net, I bought a 2.5" lcd ipod replacement screen for $0 off of ebay. I really don't watch much movies so the quality doesn't really matter as long as I can see my music and audiobooks. So here is the problem:
They both have 32 pin connectors that attach to the 32 contact ribbon connector, but the ipod ribbon is about half the size of the zen's.
I would like to connect the new screen and have a couple of options.
. connect the ipod screen ribbon to the zen's ribbon, then connect to the player.
2. somehow solder the ipod connector to the motherboard directly
3. solder the ipod connector to the casing on the motherboard
Problems:
. I don't even know if the connectors go to the same places, therefore don't know if it will work even if I do figure out how to do so.
2. I have no idea how to go about soldering ribbon connectors because the wires are so close together.
3. Any solder job that I could do would probably preclude me from putting everything back into the player.
If anybody has any ideas (other than buy a new one or pay the ridiculous $20 to fix it) your help is much appreciated and will probably help a whole mess of people.
Thanks in advance.

Took me 5 minutes to find this on google:http://www.portatronics.com/index.ph...3ceada0db84ed4?Parts for your Creative Zen Vision M:? Screens & hard dri'ves

Lenovo U310 LCD Screen Backlight Won't Turn On.

I purchased a new U310 near the end of August this year, using it primarily to bring with me to school. However, I've been having a problem with the LCD screen backlight. Typically, when the computer starts up, the backlight will be working fine. However, once the computer goes into powersave mode and shuts the display off, often the backlight to the display will not turn on again regardless of if I press keys or the touchpad. These are some things I've noticed:
The display IS still on. I can still very faintly make out the desktop and use the system, but the backlight is off completely
This issue does not happen all of the time, but is still quite frequent
Sometimes putting the computer to sleep and then waking it solves the problem, but not all of the time
Sometimes the backlight remains off even after a forced power off (holding down the power button), but typically a restart solves the problem and enables the backlight again
Adjusting screen brightness has no effect
This happens regardless of the battery level and whether or not the system is plugged in
Although this issue has seemed more prevalent recently, it even happened on the day I bought the laptop, but I just wasn't yet aware it was a reoccurring issue
I've been able to recreate this issue, in fact I was just able to make it happen twice in a row. First time the display went off and didn't turn back on, I restarted. This even repeated the next time the display went into powersave mode, so I restarted again. The third time the display went into powersave mode, I was able to turn it on again simply by touching the touchpad (as it should be).
I think that about sums up what I know. I apologize for making such a long post, but I'm thinking I can't be the only one with this issue. I'm new to the community and couldn't find a similar post anywhere on the forums. Since I infrequently use this system, and the issue has been there since I got it, I'm assuming it must be a driver problem. If anyone has any insight or is experiencing similar problems, I'd be glad to hear! I thought I'd post before contacting Lenovo directly. Thanks!

I suggest you please uninstall the energy management software, reebot and install it again. You will find the setup of energy management in drivers folder in the drive named lenovo ( maybe E or D). Please give it a shot and post results.
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Screen not slide

Please, who knows what to do, because the screen not slide anymore, after i put my IPOD TOUCH 2G 8GB in a notebook with Windows VISTA 64.
I restarted, reinstall software, verified the contats. I did all possible solutions.

hold your lock and home button down untill the ipod shuts off... it resets it. if it doesnt work plug it into itunes and restore your ipod. let me know if it works

IPod Nano LCD screen cracking/scratching

i am a possible, going to be nano buyer and i was wondering if anyone who is a owner has had problems with the screen cracking and/or scratching. Also this is a question for owners with the problem and APPLE if the screen gets cracked or overally scratched withing warranty will apple replace it with a new one? also for people in singapore is there anywhere that i can get a 4GB nano, as most places have said they dont have them. thank you
Windows XP

The screen scratching issue is really going to depend on just how badly you treat the device. I don't know how the screens are getting so badly scratched, and in normal use I can't see anything other than normal wear and tear. My 3G iPod is the same - a few scuffs and scratches, but nothing to stop it working.
If on the other hand you place the nano into your pocket without a protective case, keep change and car keys in the same pocket, then yes, it WILL get scratched. If you drop it or drag it over rough surfaces, if you take a sharp implement to it, if you use abrasive cleaners on it... and probably loads of other 'ifs', you'll get scratches on it.
They are not indestructible and the LCD screen is not harder than diamond. Take care of your Nano and you should be fine.
Taking it back with scratches through normal wear and tear, or through poor care, will not get you a replacement. You would have to show that it was an actual fault with the Nano itself, and I get the distinct feeling most are fine
As for purchasing a 4GB model, have you tried the online Apple store?

LENOVO G550 DC-T4500 Tragedy, Internal crack on LCD screen

Well i am new to this forum and when i was looking for ‘Lenovo customer service’ on Google, i realised that there are many people in the same boat as me.
Well i never imagined this to happen to me, but the fact is it has happened. I purchased a new ‘LENOVO G550 DC-T4500’ which is a new laptop by Lenovo at a very low price. Well i had a low budget and was thinking of getting a small netbook, but then I saw this Lenovo ad at center.com and went and purchased it from them on 11th November 2010. I got the laptop in my office and kept it there for a week. Finally after 7 days i took it home. I did not use it instantly because I had to setup many things like Microsoft office etc and just didn’t get the time to do that. Finally after 7 days I opened it up and installed Microsoft office. I used it for like 2 hours. The next day i opened the laptop and then was trying to set the internet, and after an hour the laptop screen went blank. I did not use it even for 4 complete hours. I gave it back to center.com and they asked me whether i dropped it. Well the fact is i never dropped it. It was used just like for four hours in total. I don’t have kids or pets in my house. I stay with my husband and we both are old enough to handle laptops. Well this crack was not an external crack on the screen but an internal crack on the LCD screen. Now isn’t that weird that there is no crack on the laptop but a cack developed on the LCD screen and they say that it has been dropped. Now i don’t know how to prove that i did not drop the laptop, but the real truth is that i never did anything to the laptop for it to develop that internal crack. When i returned it back to center.com i returned it with complete packing because all this time when the laptop was with me it was packed and i opened it up after 7 days and used it for 4 just hours in total.
Center.com told us that Lenovo has rejected the warranty in this case and gave me a number for lenovo’s customer service department. I called up lenovo’s customer service department for like 4 days. Each time a different person answered the phone and gave me different answers. Some said we are looking into it. Finally they made me go crazy then finally one person called and said the same thing, he is looking into the case. After few days he sent an email and said that they can’t help and the crack cannot develop on its own and if I have to get it repaired I have to pay like almost the same amount as that of the laptop. This is ridiculous, absolutely disappointing.
Well even if Lenovo does not help me i would like to tell all those people who are reading this, buying a laptop from Lenovo and then going through all the pain for no mistake of yours is the worst thing that can ever happen to a customer. And no matter how big this company is, but the fact is that they are not worth it. I pray this does not happen to anyone else. I felt cheated and hurt. I will never ever recommend anyone to buy a laptop from Lenovo.

first let me say that I am in know way implying that you broke your screen but you can crack the LCD screen without causing damage to the case you can set something on it and cause a pressure crack pressure from your fingers can crack it as for internal external it appears to be internal because the clear plastic on the outside does not crack like glass there had to be some kind of force to crack the screen they just don't brake they go out from time to time as in no video but not crack
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

I turn on my a1300 camera then suddenly its lcd screen turns green..why?

i turn on my a1300 camera then suddenly its lcd screen turns green.. icons on the screen is in color green and its larger than the usual size of the icon...

Hi, sounds like Graphic card or VRAM issue. Does it get better once warmed up?
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode).

LCD screen 6600 slide

Similar Messages

Maybe you are looking for