LCD Shows Only Green or Pink or Orange, etc, Screen After 10.5.8 Upgrade

My Lacie LCD monitor came up solid green after restarting following the update to 10.5.8. Every time I turn the monitor off then on, it just shows a different solid color. Right now I'm plugged in to an old CRT and it works fine. Was it the upgrade that caused this or should I look elsewhere for the diagnosis?

Monitor is bad... being replaced under warr.

Similar Messages

  • My iPad suddenly started to show crazy colors.  I turned it off and had to use the two button trick to turn it back on.  Now it shows only green stripes for a few seconds and goes back to sleep.

    My iPad suddenly started to show crazy colors.  I turned it off.  It would not reboot until I used the two-button reboot.  Now it shows only green stripes.  only for a few seconds and goes back to sleep.  HELP!

    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove all apps from Recently Used list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Tap and hold any icon in this list until they wiggle
    - Press the red to delete all apps from this list.
    - Press the home button twice when done.
    4. If still a problem restore with your backup.
    5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    6. If still a problem, it's likely a hardware issue.

  • IPod screen showing only USB cable to be connect to iTunes after Update and Restore.

    My 4G iPod model no is A1367 and the software version is 4.2.1, so as it’s a very old version i wanted to update the software to iOS 6.1.6, so I have taken backup, then Update my device with iOS 6.1.6 after that I tried to restore my device, it started to downloaded (847.8 mb)  iOS 6.1.6  again and again and iPod screen showing only USB cable to be connect to iTunes. please tell me how should i resolve it.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device... Re-Sync your Content

  • Mail showing blank screen after iOS 8.2 upgrade

    after upgading to iOS 8.2 today, my mail is showing what seems to be a blank gmail screen, then goes dark, then transparent. Not able to get any email.  Tried deleting gmail account,  still getting same screen.

    Hey Markwoody,
    Wow! That definitely sounds frustrating, but good job so far isolating and troubleshooting the issue. We have a few more steps that we can try in an attempt to resolve this issue:
    First, it sounds like you have tried restarting your phone. Let’s try a reset instead:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/ht201559
    How to reset
    - You should reset your device as a last resort and only if you can't restart it.
    - To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    If the issue persists, we’ll want to restore your device to factory settings and test once more. You can backup your device, but be sure to restore it as new first for isolation purposes, as restoring a backup can sometimes restore the same issues that you were experiencing before.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    http://support.apple.com/en-us/HT201252
    Thanks,
    Matt M.

  • Itunes shows only green screen

    I keep getting a green screen for my imovies?

    I'd first try the "Disable Direct3D acceleration in QuickTime" section from the following document:
    Troubleshooting iTunes for Windows XP and 2000 video playback performance issues
    (After making the settings change, restart iTunes prior to checking to see if the change has had any effect.)

  • TS3694 I was just updating my iphone and seen a massage that there is an error in updating and iphone is collapse showing only data card and iphone picture on screen

    I was updating my iphone and seen a massage there is an error in updating and after  switching from computer iphone is not restarting showing a picture of
    data cord and itunes.
    now how to resolve the problem.

    This will help
    plug into iTunes and see here
    http://support.apple.com/kb/HT1808

  • Orange flikkering screen after startup?

    Suddenly after a restart the screen turns orange (first black with a white banner on top) and flikkers. The whitish screen with the apple loge appears first but when normally the desktop would appear it stalls and starts flikkering. Any idea what's wrong?
    Thanks,
    Reinier

    THanks Barry,
    I Will doi so.
    CHeers,
    reinier

  • My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it.

    My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it. 

    Hello Korawees,
    I was researching the issue you are describing and had a recommendation. The device is very simple, so the software troubleshooting for it is pretty limitted so I think you shoud restore the iPod shuffle and re sync the content. That way, if it is a software issue, this will fix it. Here is the article named Restoring iPod shuffle to factory settings found here: http://support.apple.com/kb/HT1481.
    Before Starting
    It is important to understand the difference between "update" and "restore." Update does not affect your settings or songs, it simply installs updated software that controls iPod shuffle. Restore erases the disk and restores iPod shuffle to its original factory condition with updated software. If you only need to update iPod shuffle, this should be done on the computer where music is normally synced. Updating on another computer will result in all songs being removed from iPod shuffle.
    Warning: Because Restore erases all songs and files on iPod shuffle, make sure to back up any files you've saved on iPod shuffle. Your songs, podcasts, and audiobooks can be synced back to your iPod shuffle if the items are part of your iTunes library.
    How to restore iPod shuffle
    Ensure that you have an active Internet connection as new versions of iTunes and iPod Software may need to be downloaded to your computer.
    Download and install the latest version of iTunes if you do not already have it installed.
    Open iTunes, and then connect iPod shuffle to your computer.
    After a few moments, iPod shuffle will appear in the Devices section on the left side of the Tunes window.
    Select iPod shuffle under Devices and you will see information about it appear in the main iTunes window under the Summary tab/button for iPod shuffle (3rd and 4th generation) or the Settings tab/button for iPod shuffle (1st or 2nd generation).
    The Version section tells you whether iPod shuffle is up to date or needs a newer version of the software.
    Click the Restore button. You will be presented with one or more restore options that may prompt iTunes to automatically download the latest iPod Software. The 4-possible restore options are:
    Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
    Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
    Restore Option 3: Use Newest Version - Restores with the latest iPod Software currently on your computer.
    Restore Option 4: Restore and Update - Restores after downloading the latest iPod Software on your computer.
    If you are using a Mac, a message will appear prompting you to enter an administrator’s name and password.
    A progress indicator will appear on the computer screen indicating that the restore process has started. Do not disconnect iPod shuffle during the restore process.
    After the restore process is complete, the iPod shuffle's status light will flash orange continuously. The iPod Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences as you did when you connected your iPod shuffle for the first time.
    When you come to step 7, I recommend Restore Option 4.
    Take care,
    Sterling

  • DVD Movies only show in green

    I have an Insignia with built in DVD player.  It worked fine (in Color) for the first year or so.  Now no matter what I do
    every movie only shows in Green.  Any suggestions?

    sounds like an issue with the internal dvd player.  I would try connecting an external to the TV and see if you get the same results.  Sounds like an issue between the output of the dvd player to the display (all internal)    If it works externally then i would stick with the external solution.

  • Videos Showing Green and Pink (Preview and Export)

    I've imported a series of MTS videos. In the timeline - the color is fine. In the Source/Program monitors, they get a weird green and pink overlay. Any thoughts?

    When I converted with Media Encoder to MP4, it still happened.
    After reading all the posts, here's what I did: emptied the Media Cache in
    PP, then downloaded PP '14
    It went away, for whatever reason
    On Tue, Jul 22, 2014 at 10:37 AM, JPellizzi <[email protected]>

  • My airport extreme shows a green light, but won't connect to the internet.

    I have an airport extreme, and it stopped working one day, so I reseted it and it's not connecting to the internet now.  It's showing a green light, however, it won't connect to the internet. I live in an apartment complex, so I don't have a cable modem. The router is directly connected to the wall via ethernet. I had the ports checked by connecting the ethernet cord directly to the computer, and the internet is working fine. I tried resetting the router, but it still doesn't connect.

    Your problem is typical Yosemite network.. just reboot the Time Capsule.. no luck reboot the network.. do a restart in correct order.. modem.. wait 2min.. TC .. wait 2min.. clients.
    No luck then do a full reset of the TC and setup in a way that Yosemite can cope with.
    Start from a factory reset. No files are lost on the hard disk doing this.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 for basestation and TCwifi wireless name.
    If the issue is wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. ie plan on a first and second round of changes to fix this.. hopefully.. I will point out other steps that can be round2.
    2. Use all passwords that also comply with 1. but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. If the TC is main router you can skip this point. This is only an issue when the TC is bridged.
    Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. Do the same for ethernet if you use it.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the computer itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
    Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
    Same thing applies to the Airport Extreme or the Express if used as router.. just replace TC in the instructions with AE.

  • Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

    Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

    All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
    Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
    I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.

  • When I plug in the VGA adapter the colors change to green and pink on the screen

    When I plug in the VGA adapter to my new MacBook Air, even without connecting the other end to the lcd projector, the screen colors on the computer change to green and pink

    As Stated above...
    Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    If no joy... Try here  >  DFU Mode

  • Have u ever seen ur iphone4 shows a green screen when u try to wake it up?

    Hello everyone. I'm facing a strange thing now
    I just bought my iphone4 few days ago. Everything works fine but everytime when I wake up it's screen it will show a green screen b4 the SLIDE TO UNLOKE comes out. It only happen under the sun. When I do the same thing at a dark place. It wont show the green screen
    Plus the green screen doesn't keep a long time maybe 1 second. I just wondered whether it gets worth as time goes by?
    I would appreciate bout it if u could tell me something bout it
    Thx

    Hello,
    Take a screen shot & use the tiny Camera icon in a Reply to upload it, if we see the same thing it's a Video card/VRAM, or OS problem, if we do not see the same thing then it's the Monitor or cable.

  • HT201269 my latest backup is not showing, only showing backups from previous devices.  using i cloud

    I purchased a new iphone 4s to replace my current iphone 4s and I'm trying to backup and transfer info.  On new device when i search for backups nothing recent is showing although old device is showing last backup?

    aliscorp07 MBP 13&quot; wrote:
    After installing Lion, the time machine is not showing the backup from previous mac os version.
    How did you upgrade?  Did you erase everything and reinstall/recopy/restore your data?   If so, and if the old backups are selected in Time Machine Preferences, see the last paragraph in the pink box of #15A of Time Machine - Frequently Asked Questions.
    the finder window is only showing "All files", "Documents" and "Air drop" folder.
    From the Finder menubar, select Preferences > Sidebar and click the things you want to appear.
    For some other things you may stumble over, see: Changes in Lion from Snow Leopard.
    how can I go back to Snow leopard from Lion.
    If you have Time Machine backups from Snow Leopard, see #14 in the FAQ link.

Maybe you are looking for