LCD time display disappears or not working
Occasionally the LCD window refuses to count up or disappears entirely. I have had a look around for others wit a similar problem and keep coming across it. I need to repair permissions and plists or something. As per this posting.
Missing items in the graphical user interface can be caused by corrupted preferences files or wrong permissions -
try the "oddball problems" fix described in the FAQ, if you have not done so already:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
Try first to remove the GarageBand user preferences from the User library and then to repair the permissions on your system volume. If all fails, reinstall GarageBand."
However I cant seem to get to the site listed so havent a clue what to do. Anyone help?
The site seems to be back online now.
Similar Messages
-
My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Cheers, Tom -
Time display disappears on timeline
I'm beginning to import audio on slides now and for some reason the time display disappears from time to time from the timeline. When this happens I can't manually adjust where the playhead is either.
Hi Varun,
Sorry, have been busy preparing for a trip and have had little time to try your suggestions out. I tried a new blank project and BRIEFLY tried it by throwing a couple of images in and it seems to be fine.
So it may be that one project. Something one of my colleagues found (as she is having the same issue, so not sure if it is just isolated to this one project) is that by manually shifting the slide bar at the bottom the time display. She found this screen shot online:
This seems to be a stop-gap and gives the display in the moment, but is not a permanent fix. This may be a clue that it disappears by manually moving the slider at the bottom in the first place. A hypothesis, I have yet to try it out at this point. Will let you know when I get back from my trip in a couple of weeks.
Thanks! -
" help me please" I have Windows 7 32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
I have to boot with a Windows
When I use the Mac operating system not have a problem and DisplayPort to VGA Adapter Working properly
why does not work with windows ?
What should I do؟
I'm grateful to give advice
tanks
[email protected]Someone in another section answered this. Thanks.
-
I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!
Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.
-
Dear all, After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regards from Hamburg Germany
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Cheers, Tom -
Time Machine options are not working. I am unable to schedule automatic backups.
Time Machine options are not working. I am unable to schedule automatic backups. The On-Off button is grayed out. I can perform a backup manually.
Thanks for responding. I have an external disk with plenty of room. It is used only for backup of my computer. I get a backup by clicking on the Time Machine icon at the top of the page and select "Back Up Now." When I click on Time Machine Preferences, there is a box labeled "Options" which allows me to exclude items from backup and notify after old backups are deleted. There is no option to schedule a backup. The "OFF/ON" box is gray. For "Next Backup:" it says "Automatic backups off." I would like to turn it on.
-
I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
What should I do?Hi Anto2211,
Please follow the thread: Black screen CC where this issue is already discussed and resolved.
Let me know for any further query.
Thanks,
Ratandeep Arora -
Hello, my itunes app is getting shut down every time I want to open it.
I don't know if it's related but ever since I downloaded the last two updates. I tryed reparing the file and uninstalling and installing several times. Still, is not working. I work with music and need my itunes up and running. Does anybody know how to fix this?Hi Vero Torres,
If you are having issues with iTunes unexpectedly quitting on launch after on your Windows machine, you may find the troubleshooting steps outlined in the following article helpful:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden -
Time capsule now does not work with Lion just installed.
Just downloaded Lion to Mac Air. Time capsule now does not work. Where is the problem?
Restart the TC.. lion is stupid.. it forgets what it is connected to with alarming frequency ... like someone suffering dementia.
If it continues to have issues, plug the TC directly to the lion computer by ethernet (if not already) and try again. Change the wireless to manual in airport utility and change the wireless name.. to force a new configuration. Once setup you can just use wireless.
In the end you may need to reset the TC.. just hold in the reset button for about 10sec. It should then become available.. a reset does not do anything to data on the hard drive but you might need to restore any passwords. -
my ipad will not let me slide to log in, or power off. I have tried to hold down the sleep and home button at the same time, but that did not work. D o you have any tips for me? Thanks.
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808 -
Why weren't we told that display mirroring would not work with a Mac older than 12 months?
Why weren't we told that display mirroring would not work with a Mac older than 12 months?
You were, just not directly. If you go to apple's mountain lion webpage, you'll see this note at the bottom:
1. AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
http://www.apple.com/osx/whats-new/features.html -
Creative Cloud error message :
could not implemented unzip a file on temporarily directory (EX11)
I tried many times but it was not working.Nobody can tell you anything without proper system information. Failing extractions can have all sorts of causes. Start with a little system maintenance:
Installation Preparations | Mylenium's Error Code Database
Mylenium -
hello i was updating my ipod 5 to ios 8 and when it was in the middle of updating it came up that i had to connect to itunes and i have done so and its telling me to restore it and i have tried many time to and its not working. So what to i do??
What exactly happens when you try to restore via iTunes?
Error messages? -
Re: After System-Recovery the Secondary Display (Beamer) will not work
Hello,
i had a problem with my Thosiba Notebook ! (Detail of System Name follows ... later)
First i saw that the Yahama Sound Chip was diabled (disapper) caused by Windows Update and i
found no way to recover / install the correct driver.
So i decided to ... give up with timewasting and Started the System Recover Process.
So after the Recover finish ... the sound was back and during the (Windows) Updating routine
... it' was disabled again, but this time i could install the new correct driver.
After i take back my installed notebock back to work (sound still working) i connect a beamer
to the secondary vga connection ... and what a suprise
the beamer shows NOTHING ... before this it still works
Has anyone a idea what could be the error reason ?
My System runs XP Home (recoverd and update to SP3)
The VAG is a GeForce G 400 (installed the driver from CD-Rom)
... i could not download the newest vga driver .. because it had an temp. problem with the Webaccess
... ... i look for the rigt ip-setup (just for info you)
If you need more details please ask ... i'll answer so good i can
Thanks to all how read this (and hopeful help me out)
This post comes from Germany ... you could replay in english !The reason why i post the model name later , is that i'm now at home , the notebook is at work.
Yes, i do the monitor selection by pressing FN + F5 ... this what make me confuse
before the recovery it works , that display switch correct between int. LCD, CRT (Beamer) or LCD+CRT.
but now the toggle did not work, but the vga driver should almost the same as before (i see no different)
... for understanding .. when i do toggle i see on LCD the option windows wich monitor i want (i mean the pop-up)
but the beamer does not start correctly the display.
I'll try to put a new driver (form the support download site) on the system .... but i believe it should already works with
the driver it has now , the new driver will give me just a bit better performance , right !?
Another thing i forgot (but is a secondary problem) is that when i want to see a DVD at the laptop
and i'll show it with the beamer it works only when i switch to CRT (Beamer) only , if i do not
the DVD shows only on LCD correct if both are active i see on CRT only a black display window where
the DVD should appear ... i can live with that, but it seems not normal ... the manual or FAQ's don't say anything about it ..
Maybe you are looking for
-
Hi All I am experiencing a strange problem after completion of PI installation which is describe below I am able to login with Admin account 'J2EE_ADMIN' in Visual Admin after restarting the application but after 10-15 minutes it starts giving error
-
Drag and Drop attachement files to applications like web browsers
I am able to drag and drop files from file explorer to html 5 web site. Why can't I drag and drop outlook attachment to the same web site? What is the difference between the two? In terms of development, what need to be done to make it work? If th
-
Loading a CVI Panel from TestStand
I am running TestStand 2.01F1 and CVI 6.0 on Windows 2000. I have a Panel with several controls on it. Within TestStand, I made several action test steps with cvi adapter. One step loads the panel using the userinterface method LoadPanelEX. Another s
-
Editing location information on multiple photos
Hi, Does anyone know if there is an easy way to add location info to multiple pics at once? I don't have a GPS enabled camera so I took a pic with my iPhoto in each place I visited on my honeymoon so I could apply that data to the photos to all the p
-
Hi Guys... I have a potential client who wants to sell a single product online. That is all well and fine to sell one product, but the reason for the question is he wants the one product to be customisable. For example he is selling custom stickers a