LCDS Server SDK Problems

Hi,
I'm using the following setup:
LiveCycle Data Services Version 2.5.1, July 2007
Flex Builder Version 3.0 - Milestone 3 Beta 2 (build
3.0.1.18364)
Eclipse 3.3.1.1
I've noticed that I have to use the server's SDK (2.0.1 build
16691) in order to build and run my application. I have a couple of
modules and I am also noticing that if I get an error in one of the
modules after editing it, the workspace appears to build fine. If I
delete the swf file created on a previous successful build again
the workspace builds fine and does not report any problems. If I
switch to Flex 3 SDK and do a clean build onlt then it reports the
problems. But when I deploy using Flex 3 SDK it complains about
verification errors and I have to switch back to Flex 2 SDK to get
it to build and deploy.
Is there something I can do to get my server SDK up to
version 3.0 of Flex SDK?
I was also hoping to use the Advanced Datagrid but that
appears to be missing when compiling with the server SDK, so I
presume that was something added in version 3?
Thanks in advance for any advice.
Regards,
Chris

I've just downloaded BlazeDS. Am I right in saying that this
uses Flex 3 SDK?

Similar Messages

  • Access Server SDK issue.

    We have set up SSO for one of our application (App1) and is working fine(in production). I am configuring one more application(App2) for SSO.
    App1 is setup using webgate on our proxy server. all the request go through the webgate, urls are validated against the policy server and are given access. no problems here
    App2 - Webgate installed on my local machine proxy apache server, configured the new policy domain, and using the same identity servers as app1, the app is working fine. I am trying to decode the obssocookie to retrieve the userid, I have created a webservice which takes in the obssocookie and decodes it go retrieve the user name, so that the service can be used in different applications(which are not on sso) kind of authenticate the user against the OAM if the user is already logged in.
    My question is I have webgate configured on my local machine and also installed the access server sdk (Oracle_Access_Manager10_1_4_0_1_Win32_AccessServerSDK.exe) on my local machine, setup the classpath and path variables as discribed in admin guide. I am running weblogic 9.2. My index.jsp page accepts the user credentials and posts it to login.jsp ( Ihave protected the login.jsp) in the policy domain with the form based authentication schem.
    I have created a testsso.jsp (unprotected page) to test the sdk. below is my code. i always get an error when i access the testsso.jsp page
    cm=my_webgate challenge=268e2d09986e24c7
    8-1-2009 12:41:17 Received message: 0 14
    cm=access_dlsso01 challenge=071a577990ee977d st=ma=25 rt=1
    8-1-2009 12:41:17 Sending message: 0 15
    response=7b951e1ae2109fb4c7319060f2b9dc57
    8-1-2009 12:41:17 Received message: 0 15
    response=c045c076d3af5af4a2038a45ede9613f st=ma=25 rt=1
    8-1-2009 12:41:17 Sending message: 0 1
    ro=t=0 o= no= r= nr= wu=http://mymachine/myapp/login.jsp wh= wo=1 wa=0 ws= st=ma=6 mi=20 sg=0 sm= version=3 pd=NULL
    8-1-2009 12:41:17 Received message: 0 1
    ro=t=0 o= no= r= nr= wu=http://mymachine/myapp/login.jsp wh= wo=1 wa=0 ws= ri=NULL st=ma=5 mi=20 sg=3236 sm= rt=0
    com.oblix.access.ObAccessException: Unprotected resource GET HTTP:http://mymachine/myapp/login.jsp pass
    ed to the ObResourceRequest, so there is no associated authentication scheme.
         ObResourceRequest resReq = null;
         ObUserSession user = null;
         ObAuthenticationScheme authnScheme = null;
         Hashtable cred = new Hashtable();
         cred.put("userid", "TEST");
         cred.put("password", "TEST");
         try
              // put the correct path to your AccessSDK installation here
              ObConfig.initialize("C:\\OAM\\oblix\\AccessServerSDK");
              resReq = new ObResourceRequest("HTTP", "http://mymachine/myapp/login.jsp", "GET");
              // check if it is protected, if yes, create a user session
              //if (resReq.isProtected()) { // commented since the resource is always comming as unproctected. when I used the access tester
              // i get that the resource is always protected with a authentication schema
                   authnScheme = new ObAuthenticationScheme(resReq);
                   if (authnScheme.isBasic()) {
                        System.out.println("##################is protected #################");
                        user = new ObUserSession(resReq, cred);
                        if (user.getStatus() == ObUserSession.LOGGEDIN)     {
                                  System.out.println("user status is LOGGEDIN " + user.getStatus());
                                  if(user.isAuthorized(resReq)) {
                                            System.out.println("Permission GRANTED");
                                  token = user.getSessionToken();
                        } else {
                             System.out.println("user status is NOT LOGGEDIN " );
                   } else {
                        System.out.println("is not basic");
              /*} else {
                   System.out.println("is not protected");
              ObConfig.shutdown();
         } catch (Exception oe) {
                   ObConfig.shutdown();
                   oe.printStackTrace();
    please advice on how to use the sdk
    Edited by: user7498134 on Jan 8, 2009 10:35 AM

    Looking at the exception - "com.oblix.access.ObAccessException: Unprotected resource GET HTTP:http://mymachine/myapp/login.jsp passed to the ObResourceRequest, so there is no associated authentication scheme.", it seems like what the SDK wants is the resource to be passed as "//mymachine/myapp/login.jsp", i.e. leave out the redundant "http:" from your URL in the program.
    Let me know if that helps.
    -Vinod

  • Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hello Sue,
    I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
    I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
    It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
    Michael

  • How do I get facetime on a MacBook Pro to work?  I keep getting a " server encountered problem during registration.." message.  I have FaceTime ver. 1.1.1

    How do I get facetime on a MacBook Pro to work?  I keep getting a " server encountered problem during registration.." message.  I have FaceTime ver. 1.1.1
    Thanks

    Icapper wrote:
    I will end up getting something other than Logitech speakers, since I'm just weird like that.
    Your not weird, your a audiophile.
    https://en.wikipedia.org/wiki/Audiophile
    Good sound costs money. And with a 5.1 system your usually doing surround sound decoding for BlueRay movies etc. for home theater purposes.
    The PC 5.1 surround sound systems require a audio card in a PC tower and mainly used for playing 3D games so that won't work for any Mac at all. So don't buy a PC 5.1 surround sound system for your Mac.
    Harmon Kardon has the GoPlay, it's a portable stereo with awesome sound (not as good as their theater systems) and you can hook up a analog male/male stereo mini cable to it from the Mac.
    $200 and it has a iPod dock and also takes like 8 batteries so it's portable.
    http://www.amazon.com/dp/B002GHBTNC
    There is also the Bose Wave clock/radio, you will need a stereo mini to RCA break out cable for that.
    http://www.bose.com/controller?url=/shop_online/wave_systems/index.jsp
    The GoPlay has much better sound than the Bose, I think the Bose are overpriced.

  • Why am I getting the error: error getting license License Server communication problem W_ADEPT_CORE_EXPIRED when I try to download a book from the public library using Adobe Digital Editions. It has been working for a few months, but now I suddenly get th

    I have checked and the Adobe Digital Editions is authorized. The library book doesn't expire for another 14 days.  These have been the only two suggestions that I have found in other forums.  Does anyone have any other suggestions?

    I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
    I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
    Error getting License. License Server Communication Problem only mine says  Bad Device key after.
    Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
    i hope someone answers this soon.

  • When I open a book in Adobe Digital Editions, I get the following error: Error getting License. License Server Communication Problem: E_ADEPT_DOCUMENT_TYPE_UNKNOWN:

    Hi, I bought an e-book in PDF format that uses Adobe DRM.  I've created an account on adobe.com and tried downloading the book in Adobe Digital Editions on the Mac (as well as the bookstore's e-reader--logged into my Adobe account--on an Android device). 
    It tries to download the book but get's the following error:
    Error getting License. License Server Communication Problem:
    E_ADEPT_DOCUMENT_TYPE_UNKNOWN:
    Has anyone come across this?  Any guidance would be most appreciated!
    Thanks!
    Tony

    Please refer to the KB article, Public Knowledge Base

  • M website in Verizon's Site Builder can't be crawled by Google-server connectivity problem-

    I made a one-page website in Verizon's Site Builder program, then "added my site" at Google. Google says it can't crawl it.  Don't know if crawling is necessary but seems good to have it working regardless. Google says there's -server connectivity problem-.  Would that be Verizon? (I purchase FIOS)
    I have another website made in same Verizon program & don't have a problem with it at Google. It's almost identically made, & also one page.  So why the difference?. 
    Anyone know how to fix or understand this?  How to correct server connectivity problem?  or how to reach Verizon support service about this?  (no support is available at Site Builder) .  
    FYI, the -add a site- & website tool dept. at Google is called Webmaster Tools. Free tools for websites. 
    I'm so disappointed all my efforts contacting tech supports at Verizon hasn't offered concrete answers. They pass me on to other depts.  one after another...
    Would appreciate direction with this. Many thanks.
    Solved!
    Go to Solution.

    I've gotten a response, and it would seem that since my webpage comes up fine when typed in browser, that there isn't anything more that Verizon can provide.  That it would be on Google's end to assist.  But Google says there is a server connection problem.
    In the end, the website seems to work fine and I'll leave it at that.  And for whatever crawling provides, I guess I will pass on that.
    thanks for the response.
    also,  the area for == private support messages == can be located below your post via your profile page. (i think that's how it works.)

  • Content Server connection problems

    SAP Content Server connection problems
    I have installed the SAP Content Server on a Windows 2003 server. I connected to the Max DB on the remote server from Database Manager on my PC. I created repositories in R/3 in OAC0 and CSADMIN and saved documents to the Content Server. This all took a few hours from O/S install to saving a document in the repository, so I do understand the basics of the Content Server and Max DB.
    Unfortunately we are not going to use Windows; we will be running this on UNIX. Therefore I'm trying it out on a Linux system while I wait for the AIX system to be available. It's been a long road but I have finally gotten the install to finish 'successfully' however I can't connect from R/3.
    When I run the check http://10.XXX.YYY.ZZZ:1090/ContentServer/ContentServer.dll?serverInfo from the browser on the Linux host I get back a good status as shown below:
    serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="0";serverBuild="16";pVersion="0046";serverStatus="running";serverDate="2008-03-25";serverTime="22:39:45";startUpDate="2008-03-25";startUpTime="22:32:21";lastAccessDate="2008-03-25";lastAccessTime="22:38:33";
    However when I do this from any my PC it won't connect. (Of course the real problem is I can't connect from R/3.)
    If I try the same URL from a different user session on the same Content Server Linux host I get the same good status.
    I thought maybe the httpd.conf file was wrong so I tried:
    Listen 0.0.0.0:1090
    In cs.conf I tried commenting out AdminSecurity & AdminSecurityGroup.
    I also changed StorageDriver from SAPDBStorage to FSStorage.
    I don't know if this is related or just another problem to tackle once I can get through this one. I was not able to add the new system to the Database Manager. I get the error "-4 could not connect to socket [10060]".
    Thanks to all for any help. Points will dutifully be rewarded.
    David

    Hi Henk,
    It looks like I am dumber than a rock. The firewall was indeed active on the Linux host. I turned it off and can now do the http connection test to the Content Server. (I awarded very helpful points.)
    I still can't connect to the database with the Database Manager however the message has changed; it now says "-4 XSERVER might be inactive". I just turned off the firewall so I have a few things to try, like figure out how to start MaxDB without the DB Manager. I'll post my progress. Thanks Henk.
    David
    Edited by: Dave Hill on Mar 28, 2008 12:00 AM
    Now I have installed the Database Studion on my PC. No I'm getting this message when I try to connect to the host/database on the Linux system: "Cannot connect to host 10.XXX.XXX.XXX:7210 [Connection refused: connect], -813."
    Does MaxDB need to be started to connect? Any idea how to start it manually? Thanks,
    David
    Edited by: Dave Hill on Mar 28, 2008 1:06 AM
    Ah, at long last. There's this tiny yet very important little program called x_server that SAP didn't include in the SAP Content Server install guide. This needs to be running in order for anything to connect. I'm sure most of you know about it but for the rest you can find it in:
    /sapdb/programs/bin
    Then type
    ./x_server start
    I'm not sure what user it should run under but I started it as the sdb user.
    You could automate the database startup with a script. See http://maxdb.sap.com/doc/7_7/e9/005dac1592496783e26133eb7fad0b/frameset.htm
    Thank you Henk, I'll call this problem solved and award points.
    Edited by: Dave Hill on Mar 28, 2008 2:10 AM

  • I keep getting the following message after I download a book and try to open the book from my downloads (in finder) Error getting License. License Server Communication Problem: E_ACT_NOT_READY. It gives me no other information and no options other than to

    I don't really know what to do. I download a book from my library and it then goes to my download folder in finder (I have a macbook pro). When I double click on the downloaded book to open, digital editions comes up and then I get the following message
    Error getting License. License Server Communication Problem:
    E_ACT_NOT_READY
    The only option I have at that point is to close the window. My computer is registered/authorized and I have tried everything I can think of but can't get the books to download into adobe digital editions.
    Help please

    I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
    I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
    Error getting License. License Server Communication Problem only mine says  Bad Device key after.
    Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
    i hope someone answers this soon.

  • I upgraded to a new apple mac book pro and now when I try to download to adobe digital edition I receive this error:Error getting License. License Server Communication Problem: E_ACT_NOT_READY

    I upgraded to a new apple mac book pro and now when I try to download to adobe digital edition I receive this error:Error getting License. License Server Communication Problem: E_ACT_NOT_READY

    What does that have to do with Digital Publishing Suite?
    We’d love to help but if does have something to do with it, please give us
    some details.

  • Why can't i log in facetime on mac? error reads,server encoutered problem why registering?

    why can't i log in facetime on mac? error reads,server encoutered problem why registering?

    Two useful KB articles:
    http://support.apple.com/kb/HT4534
    http://support.apple.com/kb/HT4319
    The second says iOS but it actually tells how to use FaceTime from a Mac in addition to iOS devices.

  • "Error getting license. License server communication problem. E_IO_CANNOT OPEN".

    When I download ebooks from libary, I get "Error getting license. License server communication problem. E_IO_CANNOT OPEN". What can I do?

    You may be experiencing an authorization error, see KB: http://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html
    Or you may be experiencing a network related problem like the one I'm having:
    http://forums.adobe.com/thread/1420854?tstart=0

  • Ime I try to open a document I get :  Error getting License. License Server Communication Problem:  E_STREAM_ERROR:

    Every time I Try to open a document I get:  Error getting License. License Server Communication Problem:  E_STREAM_ERROR:

    do you have a compatible os for the ade version you're trying to use?
    ie, what os/what ade version?

  • VM 3.1.1: SAN Server discover problem

    I just installed Oracle VM 3.1.1 infrastructure.
    From VM Manager I discovered without problems VM Server (I attached 1TB LUN from a HP EVA SAN to VM Server).
    Problems occur when I try to discover storage: when I try to discover SAN Servers I receive this error:
    "OVMRU_007023E: Cannot create generic FibreChannel array: A generic FibreChannel array already exists: Unmanaged FibreChannel Storage Array."
    How can I attach this FC Volume Group to FC Storage array, so that I can create later a repository?
    Is there something wrong on my steps?

    Hello,
    FiberChannel storages doesen't have to be discovered like ISCSI or NFS ones. You present it to your servers using HP EVA Command View associating servers WWN and once presented FCP LUNs are seen by servers.
    Repository creation is done normally under repository tab, add new repository, then you select "physical disk" and under disks you will have your FCP LUNs.
    Greets!

  • RE: Database (SQL-SERVER) access problem

    Have you used NT Control Panel/ ODBC to set up the ODBC data source name?
    You have to define the data source (database) SecTrade as well as the
    driver to be used (SQL Server). This can be done by selecting the Add
    button on the Data Sources screen in Control Panel/ ODBC.
    Hope this helps.
    Sanjay Murthi
    Indus Consultancy Services, Inc.
    From: Administrator
    Sent: Wednesday, August 13, 1997 6:49 PM
    To: "'[email protected]'"
    Cc: murthis; thyagarajm; thyagarm; vasasm; chandraa
    Subject: Database (SQL-SERVER) access problems
    MCI Mail date/time: Mon Aug 11, 1997 10:28 pm EST
    Source date/time: Mon, 11 Aug 1997 19:25:34 +0530
    Hi Forte-Users,
    We have a setup a Sql-Server database on a NT server. In the Forte
    EConsole,
    we have
    setup a ODBC-type Resource for this server, named SERVER2_ODBC. This NT
    server
    is configured as a Client Node in the active Forte environment. Note
    that
    Server2 is not
    the Forte server, but has Forte installed. There is another NT server
    which
    acts as the
    Forte server. NODEMGR and Sql-Server are running on SERVER2.
    In our application, we have a DBSession SO with the database source
    as SERVER2_ODBC, Userid=ForteInstructor. When running the application,
    Forte
    throws an exception, the gist of it being as follows:
    USER ERROR: (This error was converted)
    Failed to connect to database: SecTrade, username: ForteInstructor.
    [Microsoft][ODBC Driver Manager] Data source name not found and no
    default
    driver specified
    We have tried
    1) Installing ODBC drivers on the NT server (Server2)
    2) Accessing local databases from Forte clients which works fine
    3) Accessing the Sql-Server database through Isqlw (Sql-Server Client
    s/w) -
    It works.
    Could someone suggest what we should try to get rid of this problem?
    Thanks for any help,
    Kishore Puvvada

    Rajsarawat wrote:
    Dear sir/mam,
    I have installed sql server 2005 (server) and on another computer installed client. It installed successfully but on client side it does not seen, from where should i start it. so please send me procedure to install sql server 2005 on both side(client and server).You have to turn on network (external to your computer) access.
    Under programs->sql server look for "surface"

Maybe you are looking for

  • Erro ao reinstalar B1BC

    Boa tarde, Abri novamente um post, pois continuo com problemas quanto a reinstalação do B1BC. Abaixo vou relatar tudo que fiz para tentar reinstalar o B1BC em um cliente me produção. O motivo de reinstalação se deu por não estar mais replicando em um

  • Coupons/Promotions support in VA01

    Does anyone know if coupons are supported in VA01 and can offer any direction for further research? Im also looking also having problems with free goods promotions where a customer can actually choose from a group of free goods. This functionality ex

  • Need help please! boot camp related

    Im in desperate need of help. Heres the story: I partioned my drive to 100 gb windows (xp home), with about 131 gb for Leopard. I followed the prompts during the installation, until i got to the screen listing the available drives for installing wind

  • ORA-04030: out of process memory error for expdp utility

    Hi, I am using expdp utility to export schema objects. It was working fine for the past one year, but now I am facing this issue. It is giving below error while exporting one schema objects. Processing object type SCHEMA_EXPORT/TABLE/TABLE ORA-39125:

  • Please let my connection hold up until I can post

    The problem I have been facing has been connection issues obviously. Every time it rains or becomes overcast I have problems staying connected. My DSL light will stay steady for 5-10 seconds and then start blinking.  I've tried to call Verizon's cust