LCM Error - Duplicate Name

Hi,
I am new to the LCM tool. Whenever I am trying to move my objects(Universes & Reports) from Dev to Quality, the Universes and the connections got successfully moved. But when we move the report it gives an error in the promotion status showing"Promotion Status=Failure : Trying to create an object with duplicate name. Id = 2017 ". Some one in the forum said about this error as CUID. Can anyone explain me what is CUID and how we can rectify this error.
Thanks & Regards,
Praveen Kumar

Hello Denis,
The following situation has happened on the Business Objects XI 3.1 SP4 with LCM SP4 environments.
I have set the SNC for both Entitlements, I needed.
I have set also LCM Job. The result is "Partial success" - please, look at the [screenshot|http://www.edisk.eu/en/download/51788/LCM_mig-result.JPG_158.13KB.html].
I have followed your advice to [track|http://www.edisk.eu/en/download/06050/QB-2568.JPG_113.25KB.html], what exactly happend for both IDs. The result is [useless|http://www.edisk.eu/en/download/90226/QB-2568-result.JPG_62.13KB.html].
Can you help me, Where am I supposed to dig?
Thank you very much.
Edited by: Ladislav Varga on Nov 12, 2011 11:43 AM
In addition I have ran another job with checking dependencies of the failsed folders. There are no dependencies. Customer have not provided me the records to the tnsnames.ora... I have realized. So, that is, what I need to check... I hope.

Similar Messages

Net use * \\computername gives a 52 error (duplicate name) with WINXP but not with WIN7

Hi,
I use the command " use * \\computername\share " to test the mapping of shared drives.
The target machine is a Win7 machine (and is in another subnet).
The lmhost file of the client machines contains the line
" IP address - computername #PRE "
to allow for name resolution.
I get a correct reply with "ping computername", which shows that name resolution at the level of the clients is all right.
However, when I try the "use * \\computername\share" command, it works fine if the client is a Win7 machine but gives me a "error 52 duplicate name" if the client is an XP machine.
Now, "computername" is NOT the NETBIOS name of the target computer but another name I use for sake of facility (the NETBIOS name of the target machine is a complex one and makes it identification by the end-user difficult when it appears in the
drop list of the GUI command "map network drive" (which is what the end-user will use for mapping).
Is it possible that the client WinXP tries checking "computername" against the real NETBIOS name of the target machine and says that there is duplication because they do not match, whereas the client Win7 does not do that or accepts that "computername"
is not the real NETBIOS name ?

Dear Carey,
Thank you for your reply. However, what the link describes is a situation opposite to what I described.
The link is about TWO computers with the same NETBIOS name on a s single local network. Then the conflict is obvious since that NETBIOS name will have to point to two IP addresses.
What I described was trying to map a shared disk on a a SINGLE computer with NETBIOS name "A" and a given unique public IP address (vvv.xxx.yyy.zzz), but to which I referred to in the lmhost file of the calling
computer (located in another local network) with another NETBIOS name ("B") .
Thus, the target computer is a names "A" in its local network but the lmhost file in the calling computer has a line "vvv.xxx.yyy.zzz
B #PRE". This when I got the "Duplicate name error".
I do not understand the error because the lmhost file should simply allow the calling computer to make name resolution (and say "B" is IP address vvv.xxx.yyy.zzz) to make the connection (which is what we get if we use the command "net use
* \\vvv.xxx.yyy.zzz\share" [this command always work]). But what I was suspecting is that the calling computer gets confused when it sees that the target computer with address vvv.xxx.yyy.zzz has a NETBIOS name different ("A")
from the one it was supposed to call ("B").
Am I correct ?
As I explained in my original post, I uses "B" to name the target computer on the calling computer because "A" is a quite fancy and difficult name that the end user will never understand or remember.
If I name the target computer "A" in the lmhost file (i.e. its real NETBIOS name), I do not have any problem.

Essbase add-in Error (duplicate name found in grid)

Hi,
I have upgraded from 7.3 to 9.2 essbase add-in and get the following error when zooming into a product dimension - seems to be a problem with base member name and alias showing duplicates!
However this error does not occur on a new installation of 9.2 where there was no previous version of essbase add-in!
Has anyone experienced this or know of a work around? - the Cube is built using ASO/AIS

Same issue here. I have a call in with Novell for this, so hopefully it will get sorted soon. I suggest others with this issue raise calls as well to get it up the priority list.

Error Event ID 11 The KDC encountered duplicate names while processing a Kerberos authentication request.

I've been noticing The Error with event ID 11 popping up a lot on our domain controllers:
The KDC encountered duplicate names while processing a Kerberos authentication request.
When running setspn -X it says that it found 111 groups of duplicate SPNs. However, when going through the list, it references domain service accounts that are used to run our SQL Server services. We have about 50 remote locations and each of them has 3
machines participating in a SQL mirror (principal, mirror, witness) and they all run the SQL Server service on the same account (1 account per location).
We haven't experienced any issues at all but I was wondering if this could cause problems or if we are straying from best practice. Any advice is welcome. Thanks!

I believe what you should do to follow best practice is to provide unique SPNs for each SQL server, which will also provide increased security, and to do that you must create individual service account for each SQL server so it can associate that
account with that server's SPN.
Here's more on it to help guide you. Read Paul's comments, as well as other suggestions in the following thread:
event ID 11 There are multiple accounts with name MSSQLSvc/xxxxxx
http://social.technet.microsoft.com/Forums/windowsserver/en-US/8df35316-23ba-48ba-aa3e-2249fcbfecbc/event-id-11-there-are-multiple-accounts-with-name-mssqlsvcxxxxxx?forum=winserverDS
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

SQL-error "-955-Duplicate name" in DDL statement

Hi!
During upgrade preparations (PREPARE) i got follwing problem activating a table TAREF in SOLMAN32/MaxDB 7.5
estos100:smpadm 79> more MVNTTOOL.ELG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MVNTABS errors and RETURN CODE in P060227.SMP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETP345 22:16:03: Retcode 1024: SQL-error "-955-Duplicate name" in DDL statement for "TAREF
2EETP345                   "
2EETP334 22:16:03: error in DDL, nametab for "TAREF" not activated
1 ETP111 exit code           : "8"
estos100:smpadm 80>
When looking from the ABAP perspective (se14 -> table "TAREF" -> Indexes) I see that the table has two indexes:
"0   X   Primary index"
"1   X   Index on Object Type".
When looking at details for "index 1" it says "does not exist in database".
How do I solve this ABAP dictionary inconsistancy?
Regards,
Fredrik
Message was edited by: Fredrik Rosengren

Hi Fredrik,
please open an OSS message for your issue.
Kind regards,
Roland

LCM Error in promoting Crystal Reports using Dynamic Cascading

Hi,
I am having one Crystal report, developed in CR XI R2 ,it is using one Dynamic cascading prompt.The DB is Oracle Server.
The report is working fine on standalone desktop as well as Dev server .
But when i try to move this report using LCM to Production (Dev to Prod or Dev to Test) it throws error "Promotion failure - Trying to create an object with duplicate name" .
I have gone through LCM document ion and found that we need to select report as well as the BVM or dynamic cascading .I tried this option also but it didn't work.
Can anyone suggest what i am missing ?
thanks
Nitin

In the destination system there is another report with the same name but different CUID, can you confirm?
- Maheshwar

The KDC encountered duplicate names while processing a Kerberos authentication request in a Domain controller server

HI
we have a sharepoint farm and in domain controller server, this error is in event viewer
Log Name:      System
Source:        Microsoft-Windows-Kerberos-Key-Distribution-Center
Date:          9/15/2014 10:44:15 PM
Event ID:      11
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      XXXAPP01.xxxportal.com
Description:
The KDC encountered duplicate names while processing a Kerberos authentication request. The duplicate name is HTTP/XXXWFE01.xxxportal.com (of type DS_SERVICE_PRINCIPAL_NAME). This may result in authentication failures or downgrades to NTLM. In order to prevent
this from occuring remove the duplicate entries for HTTP/XXXWFE01.xxxportal.com in Active Directory.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kerberos-Key-Distribution-Center" Guid="{3FD9DA1A-5A54-46C5-9A26-9BD7C0685056}" EventSourceName="KDC" />
    <EventID Qualifiers="49152">11</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-15T19:44:15.000000000Z" />
    <EventRecordID>131824</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>XXXAPP01.xxxportal.com</Computer>
    <Security />
</System>
<EventData>
    <Data Name="Name">HTTP/XXXWFE01.xxxportal.com</Data>
    <Data Name="Type">DS_SERVICE_PRINCIPAL_NAME</Data>
    <Binary>
    </Binary>
</EventData>
</Event>
adil

Hi adil,
Service principal names (SPNs) are stored as a property of the associated account object in Active Directory
Domain Services (AD DS). I noticed that you have used setpn –X to identify the duplicate SPN. Please refer to following articles and check if help you to solve this issue.
Event ID 11 — Service Principal
Name Configuration
Event ID 11 in the System log of domain controllers
Please also refer to following article and check if can help you.
The problem with duplicate SPNs
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

You cannot add a job with a duplicate name, as a web service already exists with name ... please rename the job and try again

We are attempting to add a web service job and getting a duplicate name issue. I believe we have a caching issue where this job name may already exist but we are unable to see it on the web services status page.
Is there a data services repository database table where I can find these web services jobs listed and clean it up from the backend?

There is no option there that shows me if it is being used as a web service. Here is my issue with some screen shots.
I look at my current web service enabled jobs looking for B_JOB_CP_MDR_to_GW_EMP but it is not in the list.
I attempt to add it from repository DWXDS9
It throws an error and tells me there is already a web service with this name...
Now there has got to be an internal data services table somewhere that has this job listed as a web service. I am just trying to figure out what that table may be to determine if we can do some type of cleanup on it so we can add this job again as a web service (so it is visible to us).

Java.lang.reflect.InvocationTargetException: Duplicate name

I have a class and demo program that compile. When I try to run them I get the error
"java.lang.reflect.InvocationTargetException: Duplicate name"
Can anybody give me an idea of where to start tracking down this problem? I can't see anything that looks duplicated and I can't find any help on this particular issue.
Thanks,
Abigail

I guess I can go ahead an post the code that I do have. This works when compiled and run from the command line.
Here's my demo program
import java.util.*;
import java.lang.*;
public class FileSortingDemo {
public static void main(String[] args)
/* Create an array of FileSorting object */
int sortOrder = Integer.parseInt(args[0]);
FileSorting[] files = new FileSorting[3];
files[0] = new FileSorting(sortOrder,"1.xml",19990101,501);
files[1] = new FileSorting(sortOrder,"2.xml",19990201,502);
files[2] = new FileSorting(sortOrder,"0.xml",19990202,499);
/* Sort array */
Arrays.sort(files);
/* Print out sorted values */
for(int i = 0; i < files.length; i++)
System.out.println(files.file_name + "     " +
files[i].file_date + "     " + files[i].file_size);
//End of Demo Prog
Here's the class
import java.util.*;
public class FileSorting implements Comparable
public int sort_order;
public String file_name;
public long file_date;
public long file_size;
public FileSorting(int sort_order, String file_name, long file_date, long file_size)
     this.sort_order = sort_order;
this.file_name = file_name;
this.file_date = file_date;
this.file_size = file_size;
/* Overload compareTo method */
public int compareTo(Object obj)
FileSorting tmp = (FileSorting)obj;
switch ( tmp.sort_order )
          case 0:
               if(this.file_name.compareTo(tmp.file_name) < 0)
               /* instance lt received */
               return -1;
               else if(this.file_name.compareTo(tmp.file_name) > 0)
               /* instance gt received */
               return 1;
               /* instance == received */
               return 0;
          case 1:
               if(this.file_date < tmp.file_date)
               /* instance lt received */
               return -1;
               else if(this.file_date > tmp.file_date)
               /* instance gt received */
               return 1;
               /* instance == received */
               return 0;
          case 2:
               if(this.file_size < tmp.file_size)
               /* instance lt received */
               return -1;
               else if(this.file_size > tmp.file_size)
               /* instance gt received */
               return 1;
               /* instance == received */
               return 0;
          default:
               if(this.file_name.compareTo(tmp.file_name) < 0)
               /* instance lt received */
               return -1;
               else if(this.file_name.compareTo(tmp.file_name) > 0)
               /* instance gt received */
               return 1;
               /* instance == received */
               return 0;

Content generation error. [Error: Duplicate overlay IDs are not allowed]

Has anyone else experienced this? I'm creating a hidden navigation menu that has buttons for showing and hiding it. When the menu is on, there are a number of buttons grouped together in one of the states. It works when I preview with the preview tool, but when I try to preview through Folio Builder I get the error message: Content generation error. [Error: Duplicate overlay IDs are not allowed]
All of my multi-state objects have unique names, as do buttons and layers and I still get this error. Any ideas?
Thanks,
Christopher

Attached are screenshots of my layers palette, object states and buttons. I noticed in the layers palette, after I've made the menu into a multi-state object there's a sub-group called "normal" that's showing up in my layers palette. Could this be it?

Duplicate name found in Anayze File:

Getting errors the last few days:
Duplicate name found in Anayze File: MS10-060 2265906 983583 983588 983589 Security Update for .NET Framework 2.0 SP2 and 3.5 SP1
Is SR the only way to have it fixed ?

dtemple-sgi,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

KDC encountered duplicate names while processing a Kerberos authentication request

The KDC encountered duplicate names while processing a Kerberos authentication request. The duplicate name is RPCSS/HKHVS01 (of type DS_SERVICE_PRINCIPAL_NAME). This may result in authentication failures or downgrades to NTLM. In order to prevent
this from occuring remove the duplicate entries for RPCSS/HKHCS01 in Active Directory.
- What the error means ??
- Why happen ??
- How to fix it ??
Thanks

This is an SPN problem. Having duplicate SPNs will result in Kerberos failures and a downgrade to NTLM authentication. Please run
setspn -x to get the list of duplicated SPNs. Once identified, you need to remove the duplicated ones.
You can also see that:
http://blogs.technet.com/b/askds/archive/2008/06/09/kerberos-authentication-problems-service-principal-name-spn-issues-part-1.aspx
http://blogs.technet.com/b/askds/archive/2008/06/09/kerberos-authentication-problems-service-principal-name-spn-issues-part-2.aspx
http://blogs.technet.com/b/askds/archive/2008/06/09/kerberos-authentication-problems-service-principal-name-spn-issues-part-3.aspx
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Wscompile error : duplicate

environment: JAX-RPC Standard Implementation (1.1.2_01, build R40)
Server: Sun Application Server 8.0
Problem Statement:
We have two schemas suppose abc.xsd and cde.xsd which refer to one another i.e. abc.xsd imports cde.xsd and vice-versa (circular referencing).
There is a WSDL that imports in the type definition another schema say A.xsd which in turn imports abc.xsd. config-wsdl.xml refers to this WSDL.
On running the following command to generate server side artifacts:
wscompile -gen:server -d build -classpath build -mapping mapping.xml config-wsdl.xml
we get the following error:
error: modeler error: duplicate "element" entity
Is there any mechanism (like setting a flag/using some option )by which wscompile should include definitions of the schemas only once or some other solution to overcome this duplicate element entity error. Since there is no control over xsd's, we cannot modify the schema.
Thanks in advance
Regards
anjali

Hi,
I have a duplicate error of another reason. I try to generate client stubs on a WSDL which has many identical type names but in different namespaces.
- Is there any way to tell wscompile to map the different namspaces automatically to different packagenames?
There will be more and more such webservices with identical types in different namespaces in it. I have to use them and I wan't have the possibility to write for each single webservice explicit namspace / packagename mappings in the config files.
- Does somebody know a solution?

Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal

Hello,
While exporting Export reporting from BI4 getting exception
Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
In Trace Log I am getting
com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
I tried following solution according to the all forums but still issue exist.
Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
<JVMMaxHeap>64000000</JVMMaxHeap> <JVMMinHeap>32000000</JVMMinHeap>
Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
Check for temporary read write permission on server
Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
Can you please let me know is there anything missing.

Hi,
We face the same problem with some BI4 reports.
The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
Hope it can help.
Ludovic.

RFC Connection error duplicate conversation id

Hello everybody !
I started getting a weird error on my XI RFC Connections, because of this I can't connect to my SLD.
When testing the RFC connection "AI_DIRECTORY_JCOSERVER", Ai_RUNTIME_JCOSERVER, LCRSAPRFC and SAPSLDAPI (trans sm59) I get the following error:
ERROR duplicate conversation id 34212218 from localhost/sapgw01 and calhost/ pgw00
COMPONENT CPIC (TCP/IP) with Unicode
COUNTER 87
MODULE r3cpic.c
LINE 5432
RETURN CODE 736
SUBRC 0
RELEASE 640
TIME Tue Dec 07 12:43:22 2004
VERSION 3
Does anybody have any idea/clues on this? thanx!
Martial

Hello !
I have the same problem you had ...
Do you solve your problem and how ?
Thanks in advance
Martial

LCM Error - Duplicate Name

Similar Messages

Maybe you are looking for