LCM issue after 11.1.2.2 was installed; Unable to find artifact folder -

Hi there,
I was able to migrate artifacts from 931.x to 11.1.2.1 succesfully. (this was a production9 tot test11 system)
Now I have installed a 11.1.2.2 environment and things start to differ.
Migration is not workring as expected.
The import to 11.1.2.2 complain with several lines:
Warning in migrating artifact, "/Repository Objects/".
EPMLCM-37038: Cannot perform migration. Unable to find artifact folder - REPORTMART in the source application.
it does so for every selected folder to import.
It seems to me that the 11 import technically expacts the real folder names while 11.1.2.1 and before was able to import the structure/ foldernames like 0000012a and 000 and 00000.
Has anyone come across this an knows how to tackle it?
Your help would be very much welcome.

Hi Jasmine,
thanks for your response.
I know the answer your giving is the theoretical answer oracle support would give me. On the other hand I used this tool succesfully to migrate/ copy IR artifacts from 931 to 11.1.2.1. So I am almost convinced it is possible to use for 11.1.2.2 too.
It looks like Orace likes to keep the real background knowledge of these utilities for it self. There is very very little information on the tool in the manuals. Which I am ure of I read them all. When a little part of the alcm changes the general public has to find solutions our self. Thats why I asked the forumpopulation to help me with it.
Detlev

Similar Messages

After updating my IOS TO 8.1 (12B411) on 10/23/14, I went to update my blood sugar level in the IHealth app. And now after the new IOS update I'm unable to find the blood glucose option in the IHealth app. Did Apple remove it or just mess up AGAIN?

fter updating my IOS TO 8.1 (12B411) on 10/23/14, I went to update my blood sugar level in the IHealth app. And now after the new IOS update I'm unable to find the blood glucose option in the IHealth app. Did Apple remove it or just mess up AGAIN?

Apple removed blood glucose until further notice. The reason behind this is that it gave a distorted picture in countries where the medical world used other measuring units. I suspect it will be available again in a future update.

HP Support Assistant stopped working after HP Network Check Helper was installed

My computer model: HP Pavilion SlimLine s5-1160 desktop with Windows 7 64-bit Media Center
While I was away from my computer this morning HP installed HP Network Check Helper. When I returned there was a message that I needed to restart the computer. Upon restarting I received the same message. After trying several more times I disabled the helper using Manage Add-ons, but the restart computer message keeps appearing. When I tried to open HP Support Assistant it would not open, but instead the restart message popped up. In HP Setup Manager I clicked on Get Assistance, then Launch Support Assistant, and got....the restart message. If I open HP's Windows Help and Support and click on "Contact Support (Get in touch with someone at HP)" I get....the restart message. I re-installed HP Support Assistant with the latest version on the the HP website. Upon restarting the computer I got....the restart message.
So, the computer keeps telling me I need to restart it, HP Support Assistant will not open, and I can't obtain an HP support number to call by clicking on "Contact Support (Get in touch with someone at HP)". Does anyone know a number I can call to "Get in touch with someone at HP"?
Thanks.
This question was solved.
View Solution.

Sorry you're having the problem with your PC.
If you haven't been able to contact HP yet here is the number:
800-474-6836 (800 HP invent)
My response is my own and not HP's.
If this solves your issue please mark "Accept as Solution."
Click on the white Kudos star to show your appreciation.

Issues after 10.8.2 with Maximum installed RAM

After updating my Mac Pro to 10.8.2 I have discovered that it can no longer boot with more than 64GB of RAM, I had 128GB of ram installed and after some testing I've found that if I install 64GB it books ok, but any more it attempts to boot OSX then Halt.
Was this on purpose? when I was running 10.7 OS X claimed it could only see 96GB of RAM, but when 10.8 and 10.8 came around it updated to 128GB.
Now at 10.8.2 I get some really bad screen errors and the Mac Pro seems to halt, wont reboot when I've got 128GB of RAM installed.

I sent an email to OWC and this was their responce
Looks like you're not alone, not sure if that's comforting or not... Looks like a lot of mac pros are suffering from hardware incompatibilities, not just RAM over 64GB. Here's my current list of issues I've come across:
*Not being able to boot with more than 64GB of ram
*Video card drivers needing to be reinstalled.
*Certain video cards failing
*Slow network speeds.
*Running Virtual Box 4.2 under 10.8.2
*Fans going full blast for no apparent reason
*GTX 550 Ti sleep issues.
I'm sure apple will address this issue quickly.
Sincerely,
OWC Tony
Technical Customer Service Representative
Other World Computing, Inc. (OWC)
OWC.net, Inc.
I think 10.8.2 has some hidden surprises.

Latest security download Norton saw cloud 9 virus issue after download Firefox wouldn't open said 'can't find runtime', deleted and reinstall to work XP Pro SP3

Running Firefox 36.0.1 a security update was downloaded on 3.19.2015.
Norton said it found a cloud 9 problem. Afterwards tried to open Firefox,
but instead of opening I received a 'Can't Find Run-Time' error.
Deleted Firefox from programs, installed new and everything worked just fine.
2 days later received a security update downloaded it and the same exact thing happened.
After deleting again, Installed new with 36.0.3 and everything works fine again.
I'm using Win XP Pro SP3

hello, there are [https://community.norton.com/en/forums/problem-firefox-3601-update similar reports] in the norton forums as well. please use the following form to submit false positives to norton so that they can improve their detection systems: https://submit.symantec.com/false_positive/

TS1363 After latest update of itunes was installed none of my devices will sync.

When I attach any of my devices (iphone 4S, iPad2, iPod2) using the USB cable a message apears saying 'Installing Driver Software,' then moments later another message appears saying 'Installation Failed.'
Has anyone else had this problem and if so do you know the solution to get my devices to sync again?
Thanks

Problem fixed - I should have looked at the forum first - the solution was there. Thank you to those who help us!

TS1470 Since very recently whenever I connect to Whatsapp and a few other Apps I get the following message " CONNECT TO I TUNES TO USE PUSH NOTIFICATIONS" After connecting to I Tunes I am unable to find any solution there

Since recently whenever whenever I check any application especially WhatsApp, before it opens I get the following notification:
: CONNECT TO I TUNES TO USE PUSH NOTIFICATIONS: After connecting to I Tunes I find no solution there?

Dropbox is virtually disabled on my phone now because of these messages, and most other apps are now difficult to use. I have rebooted the phone several times, reset network settings and restored factory settings (and had to make all my adjustments again) but nothing worked. My phone is now almost totally useless.

Color (onscreen/print) issues after update to 10.4.9

I am on the hunt for any new information - I haven't found it yet. I am convinced that one printer profile has gone haywire after the OSX 10.4.9 update. I can no longer use it accurately to onscreen proof nor application manage print in Aperture. The other printer profiles seem to be working. Using PSE4 I get the same preview and print results - major yellow/orange colorcast. My other two printers are working ok.
I understand proofing may/will present a shift in lightness, contrast, etc. and you can create an Aperture version to make adjustments for that profile. But I am experiencing a major shift that is difficult to adjust in the overall image.
Has anyone experienced "all of a sudden" icc profile / onscreen proofing / printer issues after the update (FYI ColorSync was updated in that)? I have tried just about everything except un/reinstalling Aperture.

Did you find out anything about this? I'm having exactly the same problems with Aperture and 10.4.9. Onscreen proofing is completely useless for all profiles supplied by HP (I have a B9180 printer). It might of course be an issue with these particular profiles, but odd thing is that it's only the screen rendering that looks wrong (yellow or reddish cast) while the prints looks just great.

Lost my registrations and my sites in iweb after new logic board was instal

I recently brought my MacBook Pro in to the Apple to store to check out why it wasn't starting up properly. I would hear a chime but the display wouldn't even light up. We tried an SMC and a PRAM reset. We tried plugging in an external monitor and reseating the ram. They had determined after 30 minutes at the genius bar that I must have a faulty logic board. Four days later I picked up my repaired notebook and everything was fine.
I then began noticing some very peculiar things. Saved settings seemed to be missing. My browsers cache was not as I had left it. My BootCamp Volume had gone back to a previous state prior to some applications being installed and even had a user account missing. So far, this didn't seem to be enough to make an issue of until tonight.
I went to open an application and it prompted me for my registration number. I've had this app installed for about 6 months now and never had an issue. Then I go to open iWeb and discover that all my sites and pages are missing. I haven't looked for them because they really aren't that important to me... but what if they were?!
Many settings and preferences are perfectly fine but I find it extremely hard to understand how coincidentally all of these other items crapped out immediately after a new logic board was installed. Is there any explanation for this at all? Is there any further testing or further info I can provide to get to the bottom of this?

Look in "About This Mac" in the  menu for the serial number. They probably didn't copy it to the new logic board. They can download software to do this from a website restricted to Apple service departments.

IPod touch Battery Problems Since iOS 7 was installed last year.

Hello, I've had recurring battery problems with my iPod touch since the iOS 7 update was installed, and I find myself having to charge my iPod touch (5th Generation) a lot more frequently since I installed this update.
On iOS 6, I had never experienced any problems with the iPod touch's battery, as I was able to let the battery drain down completely, and let it charge for 4 hours (recommended). After the iPod touch was fully charged for 4 whole hours, I was able to unplug the lightning cable, and the iPod touch on its own would last a few days to at least a week or two weeks.
On iOS 7, since it saw its general release on the 18th September last year, I have found that the iPod's battery has drained so bad, that it dies too quickly, and when I put the iPod touch on charge, in almost an hour, the iPod touch tells me that it is 100% charged. However, when I take the iPod touch off its charge after it fully charges for that hour, it quickly drains down again.
I have gone through the standard procedure of restoring my iPod touch to its factory settings, and I have seen absolutely no improvement on the battery life whatsoever. I mainly back up whatever is on my iPod touch (I back up pictures, videos and also transfer updates that I have installed for certain apps onto iTunes), though I have seen how some people have backed up the data on their iPod's or iPhones, only they find their iDevice draining so quickly.
Even turning off certain features in the Settings app to improve the battery life doesn't help, as there is almost no difference that solves the problems I'm currently having with the iPod touch's battery.
I recently heard about the free iPhone battery replacement program which is now available, so I'm starting to worry whether I have to pay for a new replacement battery for my iPod touch.
Your help in this matter would be gratefully appreciated.
Many kind regards,
Alex Smithson
Message was edited by: Alex169853

I mainly charge the iPod touch itself for four hours and it still doesn't make a difference. I've had my iPod touch for almost 2 years and since I installed iOS 7, it still doesn't make a difference.
I was wondering, if the article you have provided doesn't sort the problems with the battery out, is there another alternative??
Your help and advice is most appreciated.
Many kind regards,
Alex Smithson

How do I find my tab history? I had hard drive issues and when I launched my browser after getting it back their was no "restore session" option. I know a tab history is kept, just don't remember where or how to exercise it. Thanks

Question
How do I find my tab history? I had hard drive issues and when I launched my browser after getting it back their was no "restore session" option. I know a tab history is kept, just don't remember where or how to exercise it. Thanks

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
Use "File > Exit" or "Firefox > Exit" if you want to restore multiple windows. 
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time. 
There is also a "Restore Previous Session" button on the default about:home Home page.
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I ha

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

HT201210 The iPod "iPod" could not be restored. An unknown error occurred (1).This is my Ipod 32 GB, which is out of warranty and is 1G-A1213 and had gone kaput, after having issues with iTunes Software as it was not able to run Music on my IPod when conn

The iPod "iPod" could not be restored. An unknown error occurred (1).This is my Ipod 32 GB, which is out of warranty and is 1G-A1213 and had gone kaput, after having issues with iTunes Software as it was not able to run Music on my IPod when connected.
I have wasted my precious 2 days and nights and am lost all my hope...APPEAL TO ALL GEEKS TO RESOLVE MY ISSUE ON HUMANITARIAN GROUNDS ATLEAST WITH SOME VALID TIME OF YOURS.
All mails can be sent to [email protected]
Restore of Ipod back up is present...but is not getting restored due to some iTunes issue with playing my music files.It says restoring and extracts but failes in 1 min with the said error.

Other users and reported error 1 but I have not seen a solution.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Updated to LR 5.4, images now importing extremely slow. After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast.

After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast. Canon,Nikon, Leica and Fuji files all rendering slow. iMac 2.9 ghz 16gb RAM OSX 10.8.5. Catalogs and images are kept on external drives. Drives running fine. Really need a fix on this since I'm norally imported and processing at least 4,000 images per LR Catalog. Is there way to revert back to 5.3? I can't use 5.4 is its current state. Thanks.

Download LR 5.3 and install it
By the way, lots of people have this complaint about LR 5.4, and the advice I give is to use LR 5.3 unless you need one of the new camera models supported by LR 5.4

LCM login issue after SP2 install

Hi,
I am unable to login to LCM after SP2 install, unable to uninstall LCM as well.
"Sorry, LCM application is unable to process your request."
It was working fine until SP2 install..All servers are running fine..I stopped and started SIA and all servers.
I also tried to uninstall or repair SP2..doesn't allow uninstalling...
Error 1723..A DLL required to run this installation could not be run...All servers running fine..
Please help me if anyone come across this problem..

Hi Seb,
Thanks for the timely help..As per the note, I tried to update the SIANAME in registry.
But,It was already updated and i just saved registry and ran addnode script to update the node..
when i run, getting exception " Could not commit LCM Service category because another object with the same name already exist" Ofcourse LCM Service is already running..Please suggest...

LCM issue after 11.1.2.2 was installed; Unable to find artifact folder -

Similar Messages

Maybe you are looking for