Ld:0711-715 ERROR:File BS-44048.c cant be processed & CMDTUX_CAT:1832:ERR..

hi..
Am using Tuxedo 10.0 with IBM cobol for AIX 2.0..
I tried building a simple IBM COBOL client program with buildclient command and got return code of 4.
after building the client i tried building the server and the return code is 4 for that and after that am getting these error msgs..
(ie. Compilation is over but i guess the problem is in link edit step)
ld: 0711-715 ERROR: File BS-4f0ce.c cannot be processed.
The file must be an object file, an import file, or an archive.
CMDTUX_CAT:1832: ERROR: can't execute cobedit -I$TUXDIR/include -o CSIMPSRV BS-4f0ce.c -L${TUXDIR}/lib CSIMPSRV.cbl TPSVRINIT.cbl -brtl -qstaticinline -lcobatmis -ltux -lbuft -lfml -lfml32 -lengine -lpthread
and this BS-(some number).c is included in buildserver.. this number is randomly generated every time.. Could anyone please suggest a solution for this??
Thanks in advance..

Hi..
I exported the environment variables as u said and they are
export COB=IBMCobol
export COBCPY=$TUXDIR/cobinclude
export IBMCOBOL=/usr/lpp/cobol
and i included MOVE LOW-VALUES TO TPINFDEF-REC IN PROCEDURE DIVISION
and without exporting ALTCC=cobedit i tried building the client and got the error as cob not found:
buildclient -C -o CSIMPCL -f CSIMPCL.cbl
cobcc[299]: cob: not found.
CMDTUX_CAT:512: ERROR: Cannot execute C compiler cobcc -I$TUXDIR/include -o CSIMPCL -qstaticinline -qrtti=all -L${TUXDIR}/lib CSIMPCL.cbl -lcobatmis -brtl $TUXDIR/lib/tpinit.o -ltux -lbuft -lfml -lfml32 -lengine -lpthread
and then in the cobedit shell script if i use REALCOB=$TUXDIR/bin/cobcc and exported that as export ALTCC=cobedit
and i tried building the client and got the same error as:
buildclient -C -o CSIMPCL -f CSIMPCL.cbl
Executing /usr/BEA/Tuxedo/bin/cobcc -I/usr/BEA/Tuxedo/include -o CSIMPCL -L/usr/BEA/Tuxedo/lib CSIMPCL.cbl -lcobatmis -brtl /usr/BEA/Tuxedo/lib/tpinit.o -ltux -lbuft -lfml -lfml32 -lengine -lpthread
/usr/BEA/Tuxedo/bin/cobcc[299]: cob: not found.
CMDTUX_CAT:512: ERROR: Cannot execute C compiler cobedit -I$TUXDIR/include -o CSIMPCL -qstaticinline -qrtti=all -L${TUXDIR}/lib CSIMPCL.cbl -lcobatmis -brtl $TUXDIR/lib/tpinit.o -ltux -lbuft -lfml -lfml32 -lengine -lpthread
After this i changed REALCOB=cob2 and exported that as export ALTCC=cobedit and tried building the client and it worked fine.
then i tried building the server and am getting the same error as before:
ld: 0711-715 ERROR: File BS-34074.c cannot be processed.
The file must be an object file, an import file, or an archive.
CMDTUX_CAT:1832: ERROR: can't execute cobedit -I$TUXDIR/include -o CSIMPSRV BS-3600c.c -L${TUXDIR}/lib CSIMPSRV.cbl TPSVRINIT.cbl -brtl -qstaticinline -lcobatmis -ltux -lbuft -lfml -lfml32 -lengine -lpthread
Am not not sure in which part am going wrong.I will be thankful if u help me in this.
can u tell me in which version of Tuxedo and AIX this buildserver worked for u?? and whether any patch required for this as Todd told?? (ie Rolling patch RP016 with Tuxedo 10.0 to use cobol compiler)
Thanks again.
Edited by: user8103349 on Mar 3, 2009 8:18 PM
Edited by: user8103349 on Mar 4, 2009 3:17 AM

Similar Messages

Pro*C using Oracle 11g - ld: 0711-317 ERROR: Undefined symbol: .sqlcxt

Hi
We we are migrating from oracle 10g to 11g and AIX 5.3 to AIX 6.1. When I run the make file I get the following link errors. Note the 10g system is running using 32bit libs, and the new system is runing the 64bit libs.
makegmake -f Makefile.all all SYSTEM=rs6k CC="cc_r" LINKER="cc_r"
cc_r -lclntsh -L/wfm/usr/oracle/product/11.2.0/db/lib /home/Builds/CommonLib/Lib/AIX/cuCommonLib.a TagCommonLib/tagCommonLi
b.a ObjFiles/TagDailyStats.o ObjFiles/TagCreate.o ObjFiles/EventLogMessageFormat.o ObjFiles/TagHeartBeatMsg.o ObjFiles/TagWriteTimingLog.o ObjFiles/Ta
gGenMain.o -o TagTG
ld: 0711-317 ERROR: Undefined symbol: .sqlcxt
ld: 0711-317 ERROR: Undefined symbol: .sqlglm
ld: 0711-317 ERROR: Undefined symbol: .sqlbuft
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
gmake: *** [TagTG] Error 8
make: 1254-004 The error code from the last command is 2.
After reading some of the ideas on the web, I added the following options, -lsql11 -I/wfm/usr/oracle/product/11.2.0/db/precomp/public, but got the same error.
> make
gmake -f Makefile.all all SYSTEM=rs6k CC="cc_r" LINKER="cc_r"
cc_r -lclntsh -lsql11 -I/wfm/usr/oracle/product/11.2.0/db/precomp/public -L/wfm/usr/oracle/product/11.2.0/db/lib /home/Buil
ds/CommonLib/Lib/AIX/cuCommonLib.a TagCommonLib/tagCommonLib.a ObjFiles/TagDailyStats.o ObjFiles/TagCreate.o ObjFiles/EventLogMessageFormat.o ObjFiles
/TagHeartBeatMsg.o ObjFiles/TagWriteTimingLog.o ObjFiles/TagGenMain.o -o TagTG
ld: 0711-317 ERROR: Undefined symbol: .sqlcxt
ld: 0711-317 ERROR: Undefined symbol: .sqlglm
ld: 0711-317 ERROR: Undefined symbol: .sqlbuft
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
gmake: *** [TagTG] Error 8
make: 1254-004 The error code from the last command is 2.
Can anyone please suggest to me what I am doing wrong .
Thanks,
Jim

Hi,
I'm experiencing the same problem, thank you for your 32 bit tip.
I installed InstantClient for 64bit and didn't find any of the sql??? functions.
http://download.oracle.com/otn/linux/instantclient/112010/oracle-instantclient11.2-precomp-11.2.0.1.0-1.x86_64.zip
After that I installed the 64 bit client with universal installer, sql*plus, programmer and OCI packets, got lots of errors, cause I have not the official distribution and scripts are partly wrong.
T24-SMS-1:/usr/lib# uname --all
Linux T24-SMS-1 2.6.26-2-amd64 #1 SMP Wed May 12 18:03:14 UTC 2010 x86_64 GNU/Linux
Then again I searched for sql??? functions sqlcxt I took and found them: (Note: they were not present with the instantclient distri with proc libraries
T24-SMS-1:/usr/lib# find /home/sms/instantclient_11_2/lib -type f -exec grep -H -i sqlcxt {} \; | grep Binary
Binary file /home/sms/instantclient_11_2/lib/libsql11.a matches
Binary file /home/sms/instantclient_11_2/lib/liborasdk.so.11.1 matches
Binary file /home/sms/instantclient_11_2/lib/libsrvmhas11.so matches
Binary file /home/sms/instantclient_11_2/lib/libclntsh.so.11.1 matches
Binary file /home/sms/instantclient_11_2/lib/libsqlplus.a matches
After that I again got the same errors. I will try the 32 bit distribution and I hope I will find some header file with sql??? functions in it.

Error is not getting logged in error file while running dataload maxl

Hello All,
I am running a Maxl to load data in a database which is running fine but noted a weird issue that the errors are not getting logged in error file. Suppose i changed the name of data file then it should give error something like
ERROR - {Error no.} - Unable to open file {filename} which should be logged in error file but my error file is still empty.
I am using the Maxl -
import database {dbname} data from data_file {filename} on error append to "D:/Error/errorfile.err";
Any inputs please...
Thanks

Try to use single quotes and the backslash. It may depend on the operating system and /or the version of essbase used. This is an example from one of my maxls:
on error append to 'D:\Hyperion\logfiles\myload.err';
cheers, chris

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Error: "File couldn't be opened for writing" with CinemaDNG sequence

Using a Premiere Pro > After Effects workflow with my colorist.
I created a project in Premiere CS6 and used MOV transcodes because Premiere CS6 does not read CinemaDNG sequences. I do not have CC installed on my computer. My colorist, on his computer (we are both using Mavericks), imported the .prproj into AE CS6. We tried to replace MOV files with CinemaDNG sequences, and AE returned this error:
After Effects error: File couldn't be opened for writing: "[file path]". ( 3 :: 0 )
Normally when you replace footage with a CinemaDNG sequence in AE, Adobe Camera Raw pops open so you can make changes before the file is important. I have never seen this error before.
My colorist has CC installed as well as CS6, so we tried that instead.
Colorist opened the Premiere CS6 project in Premiere CC, creating a new Premiere CC project. Replaced MOV files with CinemaDNG sequences within Premiere CC with no error, project plays fine in Premiere CC. Finally! So we imported the new Premiere CC project in AE CC, and all linked CinemaDNG sequences appear as color bars (unlinked footage). When testing to import a CinemaDNG sequence, AE CC returned the same error as AE CS6.
So we tried opening the same CinemaDNG files in Photoshop CS6 and Photoshop CC to see if there was an error with Camera Raw. Both versions of Photoshop open the CinemaDNG files correctly in Camera Raw (version 8.3). So now we have CinemaDNG files functioning properly in Premiere Pro, Photoshop, but... not AE?
Tried replicating this on a second, Mountain Lion computer with both versions of AE, and returned the same issue.
CinemaDNG files from a different source DID open in AE CC and AE CS6 on both computers, which leads me to believe there is some kind of permissions/metadata issue in this particular set of CinemaDNG files I'm using that's causing problems for AE, but NOT Premiere Pro or Photoshop. Anyone experience anything like this?

try the "oddball problems" fix:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)

Why does FCP error "File Not Found" when I try to open my sequences????

I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
I hope this helps. Now it's time to play "catch-up"
Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT Mac OS X (10.4.8)

[SOLVED] == ERROR: file not found: `/sbin/dmsetup'

[EDIT] A much simpler way to deal with this is to explicitly ignore the kernel update during a full system update:
pacman -Syu --ignore linux
Then explicitly update the kernel alone:
pacman -S linux
[EDIT] First, after a full system update I had to move the STUB kernel image from the UEFI directory back to /boot, them recreate the images a second time. The systemd service moved it back to the UEFI directory.
[EDIT] The use of 'mdadm_udev' in HOOKS= also seems to be no longer just 'preferred' to the 'mdadm' hook but instead is now mandatory.
I've read the news item...
Changes to LVM
2013-02-12 - Thomas Bächler
With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
If you run pacman -Syu and update device-mapper, linux and lvm2 at the same time, you will get an error message that /sbin/dmsetup is missing. Run mkinitcpio -p linux again after the update to avoid any problems.
...and I do get the message...
==> ERROR: file not found: `/sbin/dmsetup'
...but after a full system update with...
pacman -Syu
...when I execute...
mkinitcpio -p linux
...this is what I get...
Building image from preset: 'default'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
Building image from preset: 'fallback'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
So of course if I reboot I get the dreaded 'No volume groups found' message.
I should mention that I use the systemd path and service to move the kennel after it has been updated.
Last edited by KairiTech (2013-04-07 02:45:12)

With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
Just to confirm. You did all these steps, right?
EDIT: I just noticed something:
KairiTech wrote:HOOKS="base udev autodetect sata mdadm usbinput keymap encrypt lvm2 filesystems timestamp shutdown"
Replace
mdadm
with
mdadm_udev
. Maybe this is nothing, but it is recommended to use this one instead of the other.
NEW EDIT: Expecially this one
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
Last edited by s1ln7m4s7r (2013-03-24 20:42:55)

Error File not Found in CS 5.5

When I go to open up PP CS 5.5 it provides a list of possible projects I can open up. Click on a project and it opens accordingly. However, over the past 2 days it has become problematic. I can click on the listed project but I now receive an error message: Error file not found. PP will not open up. I haven't moved any files, folders or projects around. I have simply closed the project, quit PP and then opened it again when wanting to edit. I have tried opening up the auto saved project file and I receive the same message?

Hi Todd both your solutions (and the one suggested by Colin) works initially. Dbl click the project file and it opens PPro. However, I tried this on another project which has a 3rd party pllugin (Smartsound Sonic Fire Pro) in it. Things get interesting with Smartsound being activated with me unable to quit out of it and I am not able to access Premier Pro. I have to Force Quit both programs. Then when I try to dbl click on the program that opened up OK the error message returns: File format not supported. There is no Smartsound file involved in this project? Same thread? New thread? many thanks for your responses

The dreaded "Video Error-File Not Installed" When trying to watch LiveTV in WMC

I'm getting the following error message when trying to use Live TV in WMC:
Video Error
Files needed to display video are not installed or are not working correctly. Restart Windows Media Center or restart the computer.
On this system my tuners are the Hauppauge HVR 2250 and the Hauppauge HD PVR. It took awhile to set up, but when I click play on a channel I get 10 seconds of video, an audio loop of the same sound over & over followed by the above error message.
I ran into this problem once before on my Home Theater HTPC when trying to access the ATI Cable Card solution. To get that to work I had to uninstall and reinstall Playready. I tried 3 different ways of doing this on my new build & it did
not fix the problem. The only fix I didn't try was the one on Ceton's website that involves a whole lot of deleting of folders.
Since this current build doesn't have a cablecard installed, and gets the non-clear QAM stations from settop box through HD PVR, would it still be the Playready needing to be reset? The symptoms look identical to when I had the previous problem.
These same files play in the BeyondTV that I'm trying to migrate from, so all codecs appear to be onboard. I am using the latest HDPVR MediaCenter driver from the Hauppauge website & the latest drivers on the HVR-2250.
Thanks for any help!

I had this problem after upgrading my graphics card to an AMD 5450 and the solution after a couple of days of hair pulling was one I hadn't come across before in relation to this problem.
It turned out that the problem was caused by the screen refresh rate, it was set to 60Hz by default and I got the Video Error message but if I changed it to 50Hz then playback of recorded programs or watching live TV worked.

[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)

The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55)

Error: file not found

Hello,
I am using a labview program which already exists. The program
inputs a file ( txt file with some numerical data) and gives the output
file at the required location after performing some calculations to it.
The problem is when I input my file path and run the program it always
gives an error ' file not found'. Please help me.
Thanks
Laxmikanth

Hi Laxmikanth,
Some more info would be helpful. Such as posting a image of your program, which version of labview, platform etc.
that being said if you are literally typing in the filepath that is the most likely source for the error. Is there a browse button visible to the right of the filepath control? If not try right clicking and under the visible menu make sure the browse button is selected. Then click on the browse button and find/select your disk file. Now run the program and see if you get the same error.
Cheers,
--Russ

Error : file not found in SharePoint 2010

I have a problem of error "file not found" in a site collection SharePoint 2010.
    I cannot access to home page, the page of list/library/permission,etc. All pages will appear an error "file not found"
    I can access to the page of "all content"
    I can access to the site setting page, but I cannot open the link on this page. For example, I select "quick launch" in "Look and feel" section, it will show an error "file not found".
    I think I must reset my master page, but I cannot use SharePoint Designer (forbidden in my application), I cannot open the link on site setting page, and I cannot open library page to check the master page
    I can access to mobile view, and all pages work well in mobile view, but I did not find site setting page
How could I check the master page? Or this problem has other solution?
Thank you in advance.

You might have referred an image or style sheet or some file from an invalid path. Check the error in detail, where you might be able to know which file or file path is not correct. Then recorrect it in the master page and then refresh the site.
UPDATE - Can you configure the web.config to display the detailed error? Make -
<CustomErrors Mode="Off">, CallStack="true" and
<compilation debug="true" />
Do an IISReset and then refresh the site.

"Error in creating error file" message

Tried to install Palm Desktop 6.2 that came with my new Centro and at the end the message "Error in creating error file" keeps popping up numerous times.
What can be the reason?
Post relates to: Centro (AT&T)

I was also experiencing the "error in creating error file" message multiple times during installation on my XP Pro system. I googled the error message and found this post plus a reference to a problem with riched32.dll) in in another post. But that didn't help. After quite a bit of troubleshooting on my own, I found the problem. I had moved the "My Documents" folder under "D:\users" to simplify my backups. Apparently the Palm installer needs the "My Documents" folder on the C: drive. I temporarily put "My Documents" back into it's default location under "C:\Documents and Settings" and the Palm installer ran just fine with no error message. I then moved everything back under "D:\users" including the folder "Palm OS Desktop", that was created by the Palm installer and everything has been working fine since.
Thought I'd share this with others, as it's not an obvious fix.
Post relates to: Palm TX

[HTML]SignTool Error: The file is being used by another process.

Hello,
I receive this error from building a JavaScript app on a build server:
SignTool Error: The file is being used by another process.
This reproduced when building on local machine, and goes away after building again. However, our company uses gated builds so the first failure will stop an entire 2.1 hour build and I can't ship the product.
The instruction to launch SignTool is located in external files so I can't disable it, run it twice, or run it in a while loop until succeeds, ignoring failures. I have to get it to work right the first time. I looked on MSDN, and there are other people
who had this problem and never solved it.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/5871d64c-e178-4f5c-85cd-a603fe56d6c7/signtask-signtool-error-the-file-is-being-used-by-another-process?forum=msbuild
http://www.codeproject.com/Questions/275454/Can-anyone-help-me-with-Signtool-Setup-Deployment
http://qualapps.blogspot.in/2006/12/code-signing.html
The only clue I have is our solution having build configurations that aren't called "Debug" and "Release", which have been cloned from Debug/Release and have WinRT apps building. If the build script for WinRT depends on anything being
called "Debug" and "Release" it wouldn't work correctly.
In any case, there is no documentation for SignTool that mentions this error - how do I fix it?

Hi TripleRectified,
>> If the build script for WinRT depends on anything being called "Debug" and "Release" it wouldn't work correctly
What's you version of Visual Studio, on my side, in the Visual Studio 2013 Update 4, I created a new configuration(Copy Settings from "Debug") to build a WINJS project, but I can't see the exception you mentioned.
>>This reproduced when building on local machine, and goes away after building again
Does it happen on all local machines? We need to exclude environment facts first, for example: Tool, OS etc.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What could be the reason for this error file

Hi,
What could be reason for this error file, the content of the error file is :
Compiling INSERT-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling UPDATE-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling DELETE-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling LOCK-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling INSERT-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling UPDATE-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling DELETE-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling LOCK-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Created form file X:\IOT\IOT_SupportingSystem\Forms\IOTRAP.fmx
I am getting this error while compiling a form with DML sources are Database Procedure.
Thanks in advance.
Rizly

Hi,
Sorry for the delayed response. These informations are generated in the FormName.err file. If its not the error, then why its not generating for other forms. As I mentioned earlier, this fom has DML sources by the Database Procedures, that could be the reason ?, this is my first project in Forms.
The content of the IOTRAP.err file:
Compiling DELETE-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling LOCK-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Created form file X:\IOT\IOT_SupportingSystem\Forms\IOTRAP.fmx
Thanks in advance.
Rizly

Ld:0711-715 ERROR:File BS-44048.c cant be processed & CMDTUX_CAT:1832:ERR..

Similar Messages

Maybe you are looking for