LD_LIBRARY_PATH: parameter not set
Hi All,
BOX -- HPUX Itanium 11.11
I am in process of installing 10gr2 on hpux box. in order to install oracle binaly , I am using response file, I have made the necessery changes in the response file and trying to run runInstaller, it throws the following. Looking forward to your response.
$ . /db/kronqa/oracle/database/runInstaller -ignoreSysPrereqs -force -silent -responseFile \
/db/kronqa/oracle/database/enterprise.rsp.10gr2ksh: LD_LIBRARY_PATH: parameter not set
I have extracted the setup file as orakronqa owner. but , still not out of the woods. also, i tried to find out the respective logs from the base directory , but not able to locate the installer log file. it seems that installer not even started. i also did cat /var/opt/oracle/oraInst.loc , but not found any such files , which , i can consult to give further checks.
./dhrp/oracle/oraInventory/logs/silentInstall2007-08-09_10-15-16AM.log
./dhrp/oracle/product/10.2.0/oraInventory/logs/silentInstall2008-12-20_03-02-05PM.log
./dhrp/oracle/product/10.2.0/oraInventory/logs/silentInstall2008-12-20_03-05-48PM.log
./dhrp/oracle/product/10.2.0/oraInventory/logs/silentInstall2010-10-25_11-27-16AM.log
./dhrp/oracle/product/10.2.0/cfgtoollogs/oui/silentInstall2008-12-20_03-05-48PM.log
./dhrp/oracle/product/10.2.0/cfgtoollogs/oui/silentInstall2010-10-25_11-27-16AM.log
./dhrp/oracle/product/10.2.0/patchset/Disk1/install/oraparamsilent.ini
./dhrp/archive/DHRP_OH_110409/BKPFILES/oraInventory/logs/silentInstall2008-04-02_11-08-39AM.log
./dhrp/archive/DHRP_OH_102210/Bkp_102210/oraInventory/logs/silentInstall2008-12-20_03-02-05PM.log
./dhrp/archive/DHRP_OH_102210/Bkp_102210/oraInventory/logs/silentInstall2008-12-20_03-05-48PM.log
./dhrp/archive/DHRP_OH_102210/Bkp_102210/oraInventory/logs/silentInstall2009-11-04_03-16-04PM.log
./amdimd/oracle/product/10.2.0/patchset/Disk1/install/oraparamsilent.ini
./amdimq/oracle/product/10.2.0/patchset/Disk1/install/oraparamsilent.ini
./hrpsb/oracle/product/10.2.0/cfgtoollogs/oui/silentInstall2007-09-06_03-55-49PM.log
./hrpsb/oracle/product/10.2.0/cfgtoollogs/oui/silentInstall2008-08-08_12-34-20PM.log
./hrpsb/oracle/product/10.2.0/oraInventory/logs/silentInstall2008-08-08_12-34-20PM.log
./hrpsb/oracle/product/10.2.0/patchset/Disk1/install/oraparamsilent.ini
./hrpsb/oracle/product/10.2.0/oraInventory.zhrp/logs/silentInstall2007-09-06_03-55-49PM.log
./yhrp/oracle/home/orayhrp/Dba/Madhukar/YHRP_BKP_060910/oraInventory/logs/silentInstall2008-01-04_04-06-00PM.log
./yhrp/oracle/product/10.2.0/cfgtoollogs/oui/silentInstall2008-12-20_03-05-48PM.log
./yhrp/oracle/product/10.2.0/cfgtoollogs/oui/silentInstall2009-11-04_03-16-04PM.log
./yhrp/oracle/product/10.2.0/cfgtoollogs/oui/silentInstall2010-06-09_10-43-45AM.log
./yhrp/oracle/product/10.2.0/oraInventory/logs/silentInstall2008-12-20_03-02-05PM.log
./yhrp/oracle/product/10.2.0/oraInventory/logs/silentInstall2008-12-20_03-05-48PM.log
./yhrp/oracle/product/10.2.0/oraInventory/logs/silentInstall2009-11-04_03-16-04PM.log
./yhrp/oracle/product/10.2.0/oraInventory/logs/silentInstall2010-06-09_10-43-45AM.log
./yhrp/oracle/product/10.2.0/oraInventory_bak/logs/silentInstall2008-12-20_03-02-05PM.log
./yhrp/oracle/product/10.2.0/oraInventory_bak/logs/silentInstall2008-12-20_03-05-48PM.log
./yhrp/oracle/product/10.2.0/patchset/Disk1/install/oraparamsilent.ini
./yhrp/archive/NHRP_BKP_09Jan11/nhrp_db_09jan11/home/oranhrp/dba/Madhukar/nhrp_db_09Jan11/oraInventory/logs/silentInstall2009-08-24_03-16-47PM.log
./yhrp/archive/NHRP_BKP_09Jan11/nhrp_db_09jan11/home/oranhrp/nhrp_bkp_befpatch/oraInventory/logs/silentInstall2009-08-24_03-16-47PM.log
./zhrp/oracle/home/oraphrp/dba/phrp_before_patch/oraInventory/logs/silentInstall2008-12-20_03-02-05PM.log
./zhrp/oracle/home/oraphrp/dba/phrp_before_patch/oraInventory/logs/silentInstall2008-12-20_03-05-48PM.log
./zhrp/oracle/home/orazhrp/bkup_dec232009/oraInventory/logs/silentInstall2008-12-11_10-59-20AM.log
./zhrp/oracle/home/orazhrp/bkup_dec232009/oraInventory/logs/silentInstall2008-12-11_11-33-51AM.log
./zhrp/oracle/product/10.2.0/oraInventory/logs/silentInstall2008-12-20_03-02-05PM.log
./zhrp/oracle/product/10.2.0/oraInventory/logs/silentInstall2008-12-20_03-05-48PM.log
./zhrp/oracle/product/10.2.0/oraInventory/logs/silentInstall2010-12-14_01-10-35PM.log
./zhrp/oracle/product/10.2.0/cfgtoollogs/oui/silentInstall2008-12-20_03-05-48PM.log
./zhrp/oracle/product/10.2.0/cfgtoollogs/oui/silentInstall2010-12-14_01-10-35PM.log
./zhrp/oracle/product/10.2.0/patchset/Disk1/install/oraparamsilent.iniEdited by: user11983993 on Mar 25, 2012 8:36 AM
Edited by: user11983993 on Mar 25, 2012 8:39 AM
Similar Messages
-
LD_LIBRARY_PATH is not set!
I am working my way through a dba book and have succesfully installed 10g on OEL 4
I am now trying to create the database and on starting the oracle instance I get this error:
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
The strange thing is that when i issue echo $LD_LIBRARY_PATH I do get the path that I set:
:/u01/app/oracle/product/10.2.0/db_1/lib
I have not tried to create a database yet but will try now,
just want to make sure that this will not cause a problemHilton Meyer wrote:
I am working my way through a dba book and have succesfully installed 10g on OEL 4Which book? You really can't beat the official docs at tahiti.oracle.com, and as an aspiring DBA (as your posting history suggests), you really should learn to work from that first.
I am now trying to create the database and on starting the oracle instance I get this error:<snip>
I have not tried to create a database yet but will try now, Contradicting statements
just want to make sure that this will not cause a problemSo just try it. If it does cause a problem, you'll know it. If it does not cause a problem, you'll know it. What's the worst that can happen? Whether it works or not, you'll learn something, and that is your self-admitted objective - to learn. -
Error in IKM SQL to JMS XML Append SQLException: Parameter not set
Hi I am getting following error please can any one help its oracle to JMS XML integration
ODI-1228: Task jms_vendor_xml (Integration) fails on the target JMS_QUEUE_XML connection jms_xml_vendor.
Caused By: java.sql.SQLException: java.sql.SQLException: Parameter not set
at com.sunopsis.jdbc.driver.JMSXMLPreparedStatement.addBatch(JMSXMLPreparedStatement.java:62)
at oracle.odi.runtime.agent.execution.sql.BatchSQLCommand.execute(BatchSQLCommand.java:42)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:87)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.sql.SQLException: Parameter not set
at com.sunopsis.jdbc.driver.xml.SnpsXmlPreparedStatementRedirector.addBatch(SnpsXmlPreparedStatementRedirector.java:155)
at com.sunopsis.jdbc.driver.JMSXMLPreparedStatement.addBatch(JMSXMLPreparedStatement.java:58)
... 17 more
Source Code
select
FNL_VENDORT.COMPANY SNPSFILENAME,
FNL_VENDORT.VNAME SNPSFILEPATH,
FNL_VENDORT.ACCTNUM VENDORSPK
from AMIT.FNL_VENDORT FNL_VENDORT
where
(1=1)
Target Code
Insert into
VENDORS
SNPSFILENAME,
SNPSFILEPATH,
SNPSLOADDATE,
VENDORSPK
values
:SNPSFILENAME,
:SNPSFILEPATH,
:SNPSLOADDATE,
:VENDORSPK
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=VENDORSSNP$CRLOAD_FILE=VENDORS.VENDORSSNP$CRFILE_FORMAT=SNP$CRFILE_SEP_FIELD=SNP$CRFILE_SEP_LINE=SNP$CRFILE_FIRST_ROW=SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=SNPSFILENAMESNP$CRTYPE_NAME=VARCHARSNP$CRORDER=1SNP$CRLENGTH=0SNP$CRSCALE=0SNP$CRPRECISION=255SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=SNPSFILEPATHSNP$CRTYPE_NAME=VARCHARSNP$CRORDER=2SNP$CRLENGTH=0SNP$CRSCALE=0SNP$CRPRECISION=255SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=SNPSLOADDATESNP$CRTYPE_NAME=VARCHARSNP$CRORDER=3SNP$CRLENGTH=0SNP$CRSCALE=0SNP$CRPRECISION=255SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=VENDORSPKSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=4SNP$CRLENGTH=0SNP$CRSCALE=0SNP$CRPRECISION=10SNP$CR$$SNPS_END_KEY*/
/*$$JMS_START_KEY
JMSDELIVERYMODE=2,
JMSTYPE=,
JMSEXPIRATION=0,
JMSPRIORITY=9,
MESSAGETIMEOUT=3000,
NEXTMESSAGETIMEOUT=,
MESSAGEMAXNUMBER=,
DURABLE=,
CLIENTID=,
MESSAGESELECTOR=
$$JMS_END_KEY*/Hi,
Try setting all values (without <default>:) to required fields in Target properties to IKM SQL to JMS XML append.
Thanks -
Getting error 0403-041 Parameter not set.
Hi All,
I am getting below error message when i am executing this command
exp file=expOPS$PENUTIL.dmp buffer=10240000 owner="OPS$PENUTIL" consistent=y log=expOPS$PENUTIL.log statistics=none
error message:ksh: PENUTIL: 0403-041 Parameter not set.
Platform:AIX
Kindly help me out.
Thanks
Edited by: rajaryan on Dec 22, 2009 4:31 AMexp file=expOPS$PENUTIL.dmp buffer=10240000 owner="OPS$PENUTIL" consistent=y log=expOPS$PENUTIL.log statistics=none
error message:ksh: PENUTIL: 0403-041 Parameter not set.I assume OPS$PENUTIL is a user identified externally.
$PENUTIL is interpreted by the shell as a variable, which is not set. Try something likeexp file='expOPS\$PENUTIL.dmp' buffer=10240000 owner="OPS\$PENUTIL" consistent=y log='expOPS\$PENUTIL.log' statistics=none -
Fld defaulting to specific sales org for user even though Parameter not set
Hello,
I have a problem, for a specific user, where the sales org field is defaulting to a specific value even though his parmeter ID is not set for VKO. For information, the sales org value no longer exists (invalid). More over, the problem exists only for a particular transaction, MM41, MM42 and MM43. When he tried VA01 the prolem of the sales org value defaulting does not happen.
I have tried MM41, 42 and 43 with my user ID and it works properly. We use CUA but parameters are locally maintained in each child systems as this is logical. i reset the buffers (/$sync) just to be sure (as this is not a live system) but this does not help.
Any ideas?
Regards,
PrashantHi Prashanth,
at our end we do not have a retail-specific maintenance function, but i guess the problem arises when the user has entered the sales organization and saved it as " default areas of validity", try using a blank entry and then click on the tab for default areas of validity - it "could" solve the problem -
Icm/authfile parameter not set
Dear All ,
when i changed the instance profile for icm/authfile parameter ,
the standard value D:\usr\sap\ECC\SYS\global\security\data\icmauth.txt
but the problem i'm facing is that i could not find this file (icmauth.txt) in O.S level .
please advice .
Thanks
AnwarDear Manoj ,
when i'm following up with steps , some strange has came "the parameter name is not known "wdisp/max_servers" parameter
pls advice .
Thanks
Anwr -
Parameters not set error, when launching jdev 9i from Unix
Hi,
I have downloaded the patch to install jdeveloper ( p4141787_11i_GENERIC.zip )
and ftp'ed to Unix directory and unzipped.
I have modified the jdev.conf to the location where SDK is installed. we are using SDK version 1.4.2.06
I have set up the variable, JDEV_USER_HOME
When I run the jdev.exe script from jdevbin/jdev/bin
. jdev
I get the below error, saying that the parameters are not set.
Oracle9i JDeveloper
Copyright 1997, 2003 Oracle Corporation. All Rights Reserved
sh: JDEV_NATIVE_PATH: Parameter not set.
sh: JDEV_VERBOSE_MODE: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_NATIVE_PATH: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_APP_OPTS: Parameter not set.
sh: JDEV_VERBOSE_MODE: Parameter not set.
sh: JDEV_JAVA_VM: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JAVA: Parameter not set.
Appreciate your help.
Thanks
Srini PendemHi,
If this is happens only with services view bills, view consumption history.. or this happens for every other service if you are trying to access 5 minutes after logon.
Have to restarted your ITS server after changing these parameters.
well i am not aware of any ITS based service Bill.. can you please help me out.. if this is part of ESS/MSS service.
regards,
Sudhir -
Profile parameter icm/host_name_full is not set correctly
Hi All,
I am working on Solution Manager 4.0. When I execute TCODE "SOLUTION_MANAGER", it gives the following error:
Profile parameter icm/host_name_full is not set correctly (see long text)
When I click on "Long Text", it gives me the following message widow:
Message Number: SOL_GRAPHIC002
Diagnosis
The graphic cannot be displayed, since the profile parameter icm/host_name_full is not set correctly.
Procedure
Set the profile parameter icm/host_name_full correctly.
For more information, see SAP Notes 434918 and 677118.
I have referred to both the notes above. In note# 434918, it says that I need latest kernel patch (which is 150).Also the icm/host_name_full parameter parameter was not there in Solution Manager, so I created in the following manner:
Parameter Name =icm/host_name_full
Parameter Value=smgdcs1s.example.com
But however, the error continues to be the same.
Kindly help me asap.
Thanks in advance.
Regards,
FaisalHi Markus,
Earlier the profile was activated and server was also restarted. However, it was not efffective.
Now once again i have activated the profile and restared the server. Now I am able to see the profile and it value in
RZ10
RZ11
Thanks a alot for your valuable inputs
Thanks and Regards,
Faisal -
MSS - Compensation Profile iViews Error Messages (Parameter CREVI not set)
Hello Folks,
We are currently implementing ECM with MSS and SAP Portal. In the Plan Compensation iView when I click on the Employee Name hyperlink it is launching Employee Compensation Profile page having General Data, Compensation Adjustments, Salary Development, Salary Survey Data, Compensation Guidelines, Compensation Eligibility, LT Incentive iViews.
I am getting below listed messages in these iViews, I am not able to trace where the configuration for these is missing i.e. either in the Resource or Service or in any of the SPRO step. Could you please help me in pointing to the location where I am missing in the config part.
General Data iView - "Internal error; Parameter CREVI is not set, Salary Development: An error occurred while the data was read."
Salary Development, Salary Survey Data, LT Incentive iViews - "No data available"
Compensation Guidelines, Compensation Eligibility iViews - "To display data, first select an employee".
Thanks much for your help!
Thanks,
NVR.Enter in the iview PCD portal content :
iView Compensation Planning - edit iview - in propertes search for the field Compensation Review (CREV) it's optional and fey from SAP Table T71ADM08
Edited by: Javier Ignacio Serrano Zamorano on May 5, 2010 10:20 PM -
Compensation Profile Page iViews Error Messages (Parameter CREVI not set)
Hello Folks,
We are currently implementing ECM with MSS and SAP Portal. In the Plan Compensation iView when I click on the Employee Name hyperlink it is launching Employee Compensation Profile page having General Data, Compensation Adjustments, Salary Development, Salary Survey Data, Compensation Guidelines, Compensation Eligibility, LT Incentive iViews.
I am getting below listed messages in these iViews, I am not able to trace where the configuration for these is missing i.e. either in the Resource or Service or in any of the SPRO step. Could you please help me in pointing to the location where I am missing in the config part.
General Data iView - "Internal error; Parameter CREVI is not set, Salary Development: An error occurred while the data was read."
Salary Development, Salary Survey Data, LT Incentive iViews - "No data available"
Compensation Guidelines, Compensation Eligibility iViews - "To display data, first select an employee".
Thanks much for your help!
Thanks,
NVR.Hi NVR,
Please check http://help.sap.com/erp2005_ehp_04/helpdata/EN/ff/c5d98c226848ebae8e7c2ce106db67/frameset.htm for settings and http://help.sap.com/erp2005_ehp_04/helpdata/EN/97/da81a2167345359f153fafcbc8aadf/frameset.htm and the like for the different section values. We do not use some of the infotypes, so there is no data. I am just down to a salary development error now. Working with SAP on message 191413. I wish you well.
Best Regards,
Mike -
Middleware BDOC Error- Parameter I_IBASE is not set
Hi All,
In our system, when a CRM Sales Order transaction is replicated from CRM to ECC6 and completely processed in ECC 6.0
through Invoice, the CRM Middleware receives a BDoc that is in error with message Parameter I_IBASE is not set and the
result is the Document flow is not replicated to CRM transaction. I could not find any relevant OSS note or solution for this
problem. Could you let me know what is the solution for this problem. Please explain the steps to fix this error.
Thanks in advance.
--R DHi,
We have experienced the same error; however we have not found any solution.
Has anyone experienced with this error found a solution?
Brent -
BKI0008E: The environment variable BI_CALLER is not set correctely. The cur
Hi All,
I have configured backint for backup of maxdb for content server 640. I configured it as per the documents available, created the configuration fiale and the parameter file. Created the backup medium in dbmgui.
Now when i try to run the backup using the pipe am getting the above mentioned error.
Please find below the dbm.ebp log for the same...
more dbm.ebp
2009-10-22 02:06:08
Setting environment variable 'TEMP' for the directory for temporary files and pi
pes to default ''.
Setting environment variable 'TMP' for the directory for temporary files and pip
es to default ''.
Using connection to Backint for MaxDB Interface.
2009-10-22 02:06:08
Checking existence and configuration of Backint for MaxDB.
Using configuration variable 'BSI_ENV' = '/sapdb/CFC/lcbackup/apoatlas.env'
as path of the configuration file of Backint for MaxDB.
Setting environment variable 'BSI_ENV' for the path of the configuration fil
e of Backint for MaxDB to configuration value '/sapdb/CFC/lcbackup/apoatlas.env'
Reading the Backint for MaxDB configuration file '/sapdb/CFC/lcbackup/apoatl
as.env'.
Found keyword 'BACKINT' with value '/sapdb/CFC/db/bin/backint'.
Found keyword 'INPUT' with value '/tmp/backint4sapdbCFC.in'.
Found keyword 'OUTPUT' with value '/tmp/backint4sapdbCFC.out'.
Found keyword 'ERROROUTPUT' with value '/tmp/backint4sapdbCFC.err'.
Found keyword 'PARAMETERFILE' with value '/sapdb/CFC/lcbackup/param.cfg'
Found keyword 'TIMEOUT_SUCCESS' with value '1800'.
Found keyword 'TIMEOUT_FAILURE' with value '1800'.
Finished reading of the Backint for MaxDB configuration file.
Using '/sapdb/CFC/db/bin/backint' as Backint for MaxDB program.
Using '/tmp/backint4sapdbCFC.in' as input file for Backint for MaxDB.
Using '/tmp/backint4sapdbCFC.out' as output file for Backint for MaxDB.
Using '/tmp/backint4sapdbCFC.err' as error output file for Backint for MaxDB
Using '/sapdb/CFC/lcbackup/param.cfg' as parameter file for Backint for MaxD
B.
Using '1800' seconds as timeout for Backint for MaxDB in the case of success
Using '1800' seconds as timeout for Backint for MaxDB in the case of failure
Using '/sapdb/data/wrk/CFC/dbm.knl' as backup history of a database to migra
te.
Using '/sapdb/data/wrk/CFC/dbm.ebf' as external backup history of a database
to migrate.
Checking availability of backups using backint's inquire function.
Check passed successful.
2009-10-22 02:06:08
Checking medium.
Check passed successfully.
2009-10-22 02:06:08
Preparing backup.
Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
Setting environment variable 'BI_REQUEST' to value 'NEW'.
Setting environment variable 'BI_BACKUP' to value 'FULL'.
Constructed Backint for MaxDB call '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c'.
Created temporary file '/tmp/backint4sapdbCFC.out' as output for Backint for
MaxDB.
Created temporary file '/tmp/backint4sapdbCFC.err' as error output for Backi
nt for MaxDB.
Writing '/sapdb/CFC/lcbackup/pipe1 #PIPE' to the input file.
Writing '/sapdb/CFC/lcbackup/pipe2 #PIPE' to the input file.
Prepare passed successfully.
2009-10-22 02:06:08
Creating pipes for data transfer.
Creating pipe '/sapdb/CFC/lcbackup/pipe1' ... Done.
Creating pipe '/sapdb/CFC/lcbackup/pipe2' ... Done.
All data transfer pipes have been created.
2009-10-22 02:06:08
Starting database action for the backup.
Requesting 'SAVE DATA QUICK TO '/sapdb/CFC/lcbackup/pipe1' PIPE,'/sapdb/CFC/
lcbackup/pipe2' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BACKINT_ONLINE1'' from
db-kernel.
The database is working on the request.
2009-10-22 02:06:09
Waiting until database has prepared the backup.
Asking for state of database.
2009-10-22 02:06:09 Database is still preparing the backup.
Waiting 1 second ... Done.
Asking for state of database.
2009-10-22 02:06:10 Database is still preparing the backup.
Waiting 2 seconds ... Done.
Asking for state of database.
2009-10-22 02:06:12 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2009-10-22 02:06:12
Starting Backint for MaxDB.
Starting Backint for MaxDB process '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c >>/tm
p/backint4sapdbCFC.out 2>>/tmp/backint4sapdbCFC.err'.
Process was started successfully.
Backint for MaxDB has been started successfully.
2009-10-22 02:06:12
Waiting for end of the backup operation.
2009-10-22 02:06:12 The backup tool is running.
2009-10-22 02:06:12 The database is working on the request.
2009-10-22 02:06:14 The backup tool process has finished work with return co
de 2.
2009-10-22 02:06:17 The database is working on the request.
2009-10-22 02:06:27 The database is working on the request.
2009-10-22 02:06:42 The database is working on the request.
2009-10-22 02:07:02 The database is working on the request.
2009-10-22 02:07:15 Canceling Utility-task after a timeout of 60 seconds ela
psed ... OK.
2009-10-22 02:07:17 The database has finished work on the request.
Receiving a reply from the database kernel.
Got the following reply from db-kernel:
SQL-Code :-903
The backup operation has ended.
2009-10-22 02:07:17
Filling reply buffer.
Have encountered error -24920:
The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Constructed the following reply:
ERR
-24920,ERR_BACKUPOP: backup operation was unsuccessful
The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Reply buffer filled.
2009-10-22 02:07:17
Cleaning up.
Removing data transfer pipes.
Removing data transfer pipe /sapdb/CFC/lcbackup/pipe2 ... Done.
Removing data transfer pipe /sapdb/CFC/lcbackup/pipe1 ... Done.
Removed data transfer pipes successfully.
Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)-
Data Protection for mySAP(R)
Interface between BR*Tools and Tivoli Storage Manager
- Version 5, Release 4, Modification 0.0 for Linux x86_64
Build: 303 compiled on Nov 16 2006
(c) Copyright IBM Corporation, 1996, 2006, All Rights Reserved.
BKI0008E: The environment variable BI_CALLER is not set correctely. The
current value is "DBMSRV"
usage:
backint -p <par_file> [-u <user_id>] [-f <function>]
[-t <type>] [-i <in_file>] [-o <out_file>] [-c]
where:
<user_id> backint utility user
<function> backup | restore | inquire | password | delete
<type> file | file_online
<par_file> parameter file for backup utility
<in_file> name of a text file that defines the objects
default: STDIN
<out_file> Pool for processing messages and the results
of the executed function.
default: STOUT
BKI0020I: End of program at: Thu 22 Oct 2009 02:06:14 AM EDT .
BKI0021I: Elapsed time: 01 sec .
BKI0024I: Return code is: 2.
End of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)---
Removed Backint for MaxDB's temporary output file '/tmp/backint4sapdbCFC.out
Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (/tmp/backint4sapdbCFC
.err)----
End of error output of Backint for MaxDB (/tmp/backint4sapdbCFC.e
rr)----
Removed Backint for MaxDB's temporary error output file '/tmp/backint4sapdbC
FC.err'.
Removed the Backint for MaxDB input file '/tmp/backint4sapdbCFC.in'.
Have finished clean up successfully.Also, is there any specification about the user permissions and about how the backup should be run?
-
I am trying to create a custom timer job and while deploying it getting the error as:
Error occurred in deployment step 'Activate Features': Object reference not set to an instance of an object.
where am i going wrong?please suggest...
Thanks
Suu30I am not able to get the errors.So attaching the error log files here.Please help
08/21/2012 17:35:03 1 INF Entering function PsconfigUserInterfaceMain.Main
08/21/2012 17:35:03 1 INF Entering function Common.SetCurrentThreadCultureToInstalledCulture
08/21/2012 17:35:03 1 INF Entering function Common.SetThreadCultureToInstalledCulture
08/21/2012 17:35:03 1 INF Current thread culture is English (United States), current thread ui culture is English (United States), installed culture is English (United States)
08/21/2012 17:35:03 1 INF Leaving function Common.SetThreadCultureToInstalledCulture
08/21/2012 17:35:03 1 INF The current ui culture English (United States) is NOT right to left
08/21/2012 17:35:03 1 INF Leaving function Common.SetCurrentThreadCultureToInstalledCulture
08/21/2012 17:35:03 1 INF Creating the psconfig application context
08/21/2012 17:35:03 1 INF Entering function PsconfigApplicationContext.PsconfigApplicationContext
08/21/2012 17:35:03 1 INF Entering function UserInterface.UserInterface
08/21/2012 17:35:03 1 INF Leaving function UserInterface.UserInterface
08/21/2012 17:35:03 1 INF Entering function TaskDriver.TaskDriver
08/21/2012 17:35:03 1 INF Entering function TaskDriver.BuildCommandCollection
08/21/2012 17:35:03 1 INF Entering function CommandCollectionBase.CommandCollectionBase
08/21/2012 17:35:03 1 INF Leaving function CommandCollectionBase.CommandCollectionBase
08/21/2012 17:35:03 1 INF Entering function CommandCollection.CommandCollection
08/21/2012 17:35:03 1 INF Leaving function CommandCollection.CommandCollection
08/21/2012 17:35:03 1 INF Entering function CommandCollectionBase.CommandCollectionBase
08/21/2012 17:35:03 1 INF Leaving function CommandCollectionBase.CommandCollectionBase
08/21/2012 17:35:03 1 INF Creating the APPLICATION bool exposed parameter
08/21/2012 17:35:03 1 INF Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Creating the APPLICATION bool internal parameter
08/21/2012 17:35:03 1 INF Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Entering function Parameter.Parameter
08/21/2012 17:35:03 1 INF Entering function Parameter.Initialze
08/21/2012 17:35:03 1 INF Leaving function Parameter.Initialze
08/21/2012 17:35:03 1 INF Creating the SINGLESERVER bool exposed parameter
08/21/2012 17:35:03 1 INF Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Creating the SINGLESERVER bool internal parameter
08/21/2012 17:35:03 1 INF Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Entering function Parameter.Parameter
08/21/2012 17:35:03 1 INF Entering function Parameter.Initialze
08/21/2012 17:35:03 1 INF Leaving function Parameter.Initialze
08/21/2012 17:35:03 1 INF Leaving function Parameter.Parameter
08/21/2012 17:35:03 1 INF Entering function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF Creating the V2V_INPLACE_UPGRADE bool exposed parameter
08/21/2012 17:35:03 1 INF Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Creating the V2V_INPLACE_UPGRADE bool internal parameter
08/21/2012 17:35:03 1 INF Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Entering function Parameter.Parameter
08/21/2012 17:35:03 1 INF Entering function Parameter.Initialze
08/21/2012 17:35:03 1 INF Leaving function Parameter.Initialze
08/21/2012 17:35:03 1 INF Leaving function Parameter.Parameter
08/21/2012 17:35:03 1 INF Entering function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF Creating the CLEAN_INSTALL bool exposed parameter
08/21/2012 17:35:03 1 INF Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Creating the CLEAN_INSTALL bool internal parameter
08/21/2012 17:35:03 1 INF Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Entering function Parameter.Parameter
08/21/2012 17:35:03 1 INF Entering function Parameter.Initialze
08/21/2012 17:35:03 1 INF Leaving function Parameter.Initialze
08/21/2012 17:35:03 1 INF Leaving function Parameter.Parameter
08/21/2012 17:35:03 1 INF Entering function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF Creating the B2B_UPGRADE bool exposed parameter
08/21/2012 17:35:03 1 INF Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Creating the B2B_UPGRADE bool internal parameter
08/21/2012 17:35:03 1 INF Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Entering function Parameter.Parameter
08/21/2012 17:35:03 1 INF Entering function Parameter.Initialze
08/21/2012 17:35:03 1 INF Leaving function Parameter.Initialze
08/21/2012 17:35:03 1 INF Leaving function Parameter.Parameter
08/21/2012 17:35:03 1 INF Entering function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF Creating the SKU2SKU_UPGRADE bool exposed parameter
08/21/2012 17:35:03 1 INF Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Creating the SKU2SKU_UPGRADE bool internal parameter
08/21/2012 17:35:03 1 INF Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Entering function Parameter.Parameter
08/21/2012 17:35:03 1 INF Entering function Parameter.Initialze
08/21/2012 17:35:03 1 INF Leaving function Parameter.Initialze
08/21/2012 17:35:03 1 INF Leaving function Parameter.Parameter
08/21/2012 17:35:03 1 INF Entering function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF Creating the runningupgrade bool exposed parameter
08/21/2012 17:35:03 1 INF Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Creating the runningupgrade bool internal parameter
08/21/2012 17:35:03 1 INF Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Entering function Parameter.Parameter
08/21/2012 17:35:03 1 INF Entering function Parameter.Initialze
08/21/2012 17:35:03 1 INF Leaving function Parameter.Initialze
08/21/2012 17:35:03 1 INF Leaving function Parameter.Parameter
08/21/2012 17:35:03 1 INF Entering function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF Creating the LanguagePackInstalled bool exposed parameter
08/21/2012 17:35:03 1 INF Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Creating the LanguagePackInstalled bool internal parameter
08/21/2012 17:35:03 1 INF Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF Entering function Parameter.Parameter -
Not set configure retention policy to recovery window of 7 days
HI all,
if parameter "" configure retention policy to recovery window of 7 days "" is not set
then i am taking weekly and inreamental cumulative backup any effect of backup
i think in this case delete obsolete is not working.
currently parameter set is CONFIGURE RETENTION POLICY TO REDUNDANCY 1;HI all,
if parameter "" configure retention policy to recovery window of 7 days "" is not set
then i am taking weekly and inreamental cumulative backup any effect of backup
i think in this case delete obsolete is not working.
currently parameter set is CONFIGURE RETENTION POLICY TO REDUNDANCY 1; -
Hi,
I am facing a probleme where in a step of workflow is not getting executed properly. If i check the container for that step, the import parameter for it 'Guid' shows as '<not set>'. I am new to workflows, so I may not be aware of the basics or details and might have missed out. Please guide what could be the possible reasons for it.
Thanks and Regards,
RadhikaMy WF's previous step is getting executed properly which is also using the
Object id. Gor guid,
i am using Structure:SYSUUID Field: C.
As you stated that the previous step is also using the same guid, so just open the workflow in change mode and copy the binding entry from the previous step and paste it in the step where the guid is not getting set, make sure the target container has the same element name as it is in the previous step target container.
Maybe you are looking for
-
The box to select a file from/to the HD doesn't open. I can't save pages, images, Export/Import the Bookmarks via HTML, open file (CTRL+O), upload images via a browse button on sites, etc. Since I don't have a printer Print print (CTRL+P) defaults to
-
Insert phots to PDF forms a problem in Acrobat 9.0 pro
I'm trying to figure out a way to insert image files into a PDF form. Ultimately I want to distribute this PDF form and allow the users the opportunity to insert their own picture. Unfortunately, there's no tool for this on the interface that I can f
-
I imported my word .doc file into robohelp to start the project. When I went to the HTML files to start the changes, I found that the converter had given me a perfect copy of my word formatting including putting margins in inches and "no page break i
-
My son deleted a video I had taken on the iphone. I had NOT SYNCHED the iphone yet. Is there any way to recover it?
-
Adobe Reader install error on Windows Vista :(
I get this error for w/e reason.