LDAP configuration un UPM under Site fails with correct info

After TS for hrs, we discovered that basically the LDAP (optional) configuration fails for no good reason, since we finally gave up with UPM and configured CUCM for LDAP, and it worked like a champ.

Were you ever able to make any headway with this? I have a similar situation. I opened a case with TAC. They escalated it but it has been quite a while with no answer.

Similar Messages

Installation of Flash Player 11.9 under OSX fails with case-sensitive filesystem!?

The installation of flash player 11.9 aborts with an unspecified error. I running OSX 10.9 with an case-sensitive filesystem. Can anyone confirm there are problems with the installer on case-sensitive filesystems?

The problem isn't the filesystem per se. It's bad software quality if pathnames defined wrong or multiple times with different notation. Often there is only one or two letters with the wrong upper or lower case. I guess in the current Flash installer this is the case. With the previous versions I had no problems.
Am 03.11.2013 um 00:41 schrieb Mike M <[email protected]>:
Re: Installation of Flash Player 11.9 under OSX fails with case-sensitive filesystem!?
created by Mike M in Installing Flash Player - View the full discussion
My Mini isn't case sensitive, so I can't really say but I had two iMacs when I worked at Intuit that were case sensitive and they had all kinds of software installation issues. One of the Mac developers at Mountain View told me that Case Sesnitive shouldn't be chosen as a format except when a system is isolated and used as a testing server. For a workstation or home computer, it's a terrible choice for a setup.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5809947#5809947
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5809947#5809947
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5809947#5809947. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

DISPLAY/PRINT MY EXPENSE REPORTS UNDER TERA FAILS WITH THE ERROR MESSAGE

Hi Techies,
When i click on "Display/print" button under my expense report ( Employee --> Travel & expenses --> Manage Expenses (TERA) --> My trip reports), it opens up a new window with the error message "SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send failed with exception communication_failure(100,101)."
This behaviour is noticed in the new upgraded system NW 701 SP7 (portal) and backend ECC 6.0 EHP4; However it works perfectly fine with our non-upgraded system NW 70 SP10 (portal) and backend ECC 6.0.
When i ran the trace on this functionality, i could notice that in the non-upgraded system, after pulling all the values, it calls the RFC function module "PTRM_WEB_FORM_HTML_GET"; however the upgraded system calls "PTRM_WEB_FORM_PDF_GET".
For the "PTRM_WEB_FORM_PDF_GET", I believe we need to configure the "ADS" rfc pointing to the ADS service on a j2ee server which am not planning for.
MY QUESTION IS:-
IS THERE ANY OPTION TO CHANGE THE FORM BEING CALLED FROM "PTRM_WEB_FORM_PDF_GET" TO "PTRM_WEB_FORM_HTML_GET" WHICH I BELIEVE WILL RESOLVE THE PROBLEM AM FACING?
Kindly assist with your thoughts!1
-GK

Read the steps on note 1032311 on how to achieve it,
In Web Dynpro, the Parameter for Formula is Defaulted to PDF file. If
you don't want to use the ADOBE Form in ESS, you have to follow 2 steps:
Solution
    o Check the Homepage framework configuration.
In IMG (transaction SIMGH) go in Travel Management->Employee Self
Service->Homepages Framework->Ressources
Delete the URL parameter "sap.xss.tra.UsePdf=true" of the ressource
"EMPLOYEE_TRAVEL_TRIPFORM_SRV05".
Check that the field URL for PCD file is filled with
ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_fol
der/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/
com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_trave
l_expenses/com.sap.pct.erp.ess.tripform
Normally if it is not filled in your client, the system should use the
one from client 000, that is the SAP delivered customizing.
    o Check the Portal PCD configuration
Logon on to your SAP portal as Administrator.
In the Content Administration - Portal content, select Content
provided by SAP->end User Content->Employee Self Service->iViews->Travel
and Expenses->Display Trip Form
Right Click on Display Trip Form and Select Object->Open
In the field Application Parameters, you will find a parameter
                                                                 Page 2
sap.xss.tra.UsePdf=true . Delete this line completely.
When this configuration is done, the PDF form is desactivated and the
HTML form is used.
This is the issue with ADOBE set up
Firstly, I would ask you to check the customizing steps from 944221
to ensure no issue with the ADS configuration for the pdf form.
to review OSS note 925741 as there can be a issue with the
platform validity and version.

Creation of new site failed with error

We are using SAP ME 5.2.4.3.
Today I have tried to create a new site via
Site *
User ADMIN
Password *****
using the following values:
Site: 1301
Description: ODS Training
Type: Production
Site is Local: Checked
Tiime Zone: Europe/Vienna
I also set a password for the admin on the new site.
After saving the site I got the following error message:
Error while processing XML message <?xml version="1.0" encoding="UTF-8"?> <DX_RESPONSE> <CONCLUSION success='no'/> <IMPORT_RESPONSE> <TOTALS failed='1' total='1' invalid='0' succeeded='0'/> <LOG> 1 records skipped; update is not allowed 1 records skipped; update is not allowed APPLICATION_SETTING_BO failed (SETTING:transaction.log.enable) Exception occurred: Can't find resource for bundle java.util.PropertyResourceBundle, key SYSTEM_SETUP.transaction.log.enable.desc Database rollback occurred Database commit occurred </LOG> </IMPORT_RESPONSE> </DX_RESPONSE> (Message 12943)
And the site was not created correctly. (Site "1301" invalid (Message 12930) )
Any idea what could be the problem?
Best regards
Dieter

Hi Dieter,
Looks like the error happened during the initial data load for your site, exactly APPLICATION_SETTING_BO object. Make sure that APPLICATION_SETTING table exists in the DB and it matches your version of ME 5.2.4.3 (all the fields are correct).
Also you can match the table with the corresponding ApplicationSettingBO.idat
Hope it helps
Ivan

Downloads from web sites fail with an unknown error

When I try to download pdf files from a web site I get an "Unexpected Error" message and the download fails.
Works OK with Safari.

Here you may want to try the follwing within the link:
[[opening pdf files within firefox]]

Since latest update, my bookmarked site fails with certificate key usage inadequate, why? (It works fine in windows explorer)explorer

This worked the day before I got the "Gettting Started" screen when I started the browser and still works for co-workers who have not gotten the new version of Mozilla firefox.

That could be a problem with the usage of libPKIX in the Firefox 31 and later releases.
* https://blog.mozilla.org/security/2014/04/24/exciting-updates-to-certificate-verification-in-gecko/
It is possible to disable this new feature by disabling libPKIX support, but this is not recommended for security and vulnerability reasons.
*<b>about:config</b> page: security.use_mozillapkix_verification = false

Youtube sharing fails with correct passwords

Just wondering if the trial version does not allow youtube sharing. I have checked and double checked my youtube passwords, so I know they are correct, but FXPX returns with a fail and blames it on incorrect password/username.

There are many on this forum complaining about this issue. If you have not Compressor buy it. That is the way to go. Never fails.

Javax.security.auth.login.Configuration.setConfiguration() fails with java.lang.SecurityException: No Permission to set the Configuration

Hi All,
I have a custom security class (deployed in an application) that uses JAAS
to login, i have to set the Configuration in my security handler like this
Configuration.setConfiguration(new MyConfiguration());
This fails with
java.lang.SecurityException: No Permission to set the Configuration
How do i give this class the permission to set configuration???
Thanks,
Ako

nobody knows?

LDAP configuration - An internal error has occurred in the secLdap plug-in

Hi,
I am trying to configure my BOE to a LDAP (Microsoft Active Directory Application).
After completing all the configuration steps, I get the following error:
"An internal error has occurred in the secLdap plug-in"
I chose "No SSL" and "No SSO" and used all the default values in the "Please configure how new LDAP users and aliases are created by BusinessObjects Enterprise" screen.
Can someone assist?
-Doron

Hi,
I'm having the same type of problem as Doran authenticating against LDAP.
The LDAP configuration is syntactically clean, not sure whether it is correct though.
Adding LDAP groups failed miserably for all listed entries, see below in Config Parms:
Configuring without LDAP groups fails with the Login Error,
Login Error Message:               Account Information Not Recognized: LDAP Authentication could not log you on.
                                      Please make sure your logon information is correct.
                                      If your account is under any root other than dc=lgc,dc=com you must enter your dn.
                                      (FWM 00007)
The DN for my local account,
uid=hb37406,ou=people,o=hou,dc=lgc,dc=com
Crystal Report Server 2008 authenticated against an Sun iPlanet LDAP Server.
Build Date:         2008/09/13:08:31:32
Build Number:      882
Product Version:      12.1.0.882
Config Parms:
                                                LDAP Host:hourdldap01.lgc.com:389,ldap.corp.halliburton.com:389
                              LDAP Server Type: Sun Directory Server
                              Base LDAP Distinguished Name:   dc=lgc,dc=com
                                                                         ou=people,o=hou,dc=lgc,dc=com
                              LDAP Referral Credentials:cn=cmldap,dc=lgc,dc=com;
                              Password:xxxxxxxx
                              Number of Hops: 1
                              SSL authentication:Basic
                              LDAP single sign-on authentication:Basic
                              Configure new LDAP users:
                                   Assign each added LDAP alias to an account
                                   Creae new aliases only when user logs on
                                   New users are created as concurrent users
                              Mapped LDAP Member Groups
                              Add LDAP group (by cn or dn)
LDAP search on local account **
                                                            uid=hb37406,ou=people,o=hou,dc=lgc,dc=com
                                   cn=dev
                                   cn=dev,ou=group,o=hou,dc=lgc,dc=com
                                   ou=people,o=hou,dc=lgc,dc=com
                                   ou=people,dc=lgc,dc=com
                                   o=hou,dc=lgc,dc=com
                                   dc=lgc,dc=com
                                   dc=lgc.com
                                                        lgc.com
                                   ou=HalUsers,dc=corp,dc=halliburton,dc=com
                                   ou=people,dc=corp,dc=halliburton,dc=com
                                   dc=halliburton,dc=com
LDAP configuration Error:          The secLdap plugin failed to get the dn for the group xxx.

Exchange 2010 Sp2 update rollup 7 fails with error code 80070643 on Sbs 2011

Hello Everyone,
When i trie to install rollup 7 voor exchange 2010 sp2 (sbs 2011) it gives me error code 80070643. I cannot find much to solve this problem. Update rollup 8 installs fine. I've read on internet that every rollup must be installed to succesfully install exchange
2010 sp3. Can anyone help me with this error?

I just installed exchange 2010 sp3, but it does not finish. It stops at 'client access role'
This is in the log;
[10-08-2014 21:55:24.0121] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'server.company.com', Preferred Global Catalog: 'server.company.com', Preferred Domain Controllers:
'{ server.company.com }'
[10-08-2014 21:55:24.0121] [2] Beginning processing Start-SetupProcess -Name:'iisreset' -Args:'/noforce /timeout:120'
[10-08-2014 21:55:24.0137] [2] Starting: iisreset with arguments: /noforce /timeout:120
[10-08-2014 21:55:31.0640] [2] Process standard output: Attempting stop...
Internet services successfully stopped
Attempting start...
Restart attempt failed.
The IIS Admin Service or the World Wide Web Publishing Service, or a service dependent on them failed to start. The service, or dependent services, may had an error during its startup or may be disabled.
Process standard error:
[10-08-2014 21:55:31.0640] [2] [ERROR] Unexpected Error
[10-08-2014 21:55:31.0640] [2] [ERROR] Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [2] Ending processing Start-SetupProcess
[10-08-2014 21:55:31.0640] [1] The following 1 error(s) occurred during task execution:
[10-08-2014 21:55:31.0640] [1] 0. ErrorRecord: Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] [ERROR] The following error was generated when "$error.Clear();
Start-SetupProcess -Name "iisreset" -Args "/noforce /timeout:120"
" was run: "Process execution failed with exit code 1062.".
[10-08-2014 21:55:31.0640] [1] [ERROR] Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] [ERROR-REFERENCE] Id=ClientAccessServiceControl___ef7fa14362774cd9af8882d6287b640a Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[10-08-2014 21:55:31.0640] [1] Setup is stopping now because of one or more critical errors.
[10-08-2014 21:55:31.0640] [1] Finished executing component tasks.
[10-08-2014 21:55:31.0672] [1] Ending processing Install-ClientAccessRole
Anyone has any ideas?

OBIEE Start/Stop Services failed(After LDAP Configuration)

Hi ,
We made some changes(that is we have added new OID
and configured the new OID based upon the Oracle BI security guide which is in Oracle Site
) to the LDAP configuration in OBIEE web console and it prompted for a restart of the OBIEE services . when we tried restarting the services we are not able to stop all the services . Please find the attached log files .
Note:
1.unable to kill the process ID
which is releated to OBIEE 11.1.1.6.0 services..
2.We have follwed the section 3 in the below link to configure the LDAP : http://docs.oracle.com/cd/E23943_01/bi.1111/e10543/toc.htm.
Please find the below error details in short form and kindly find the attahced file(file name) for more details
Error:
Caused By: oracle.security.jps.service.igf.IGFException: JPS-02597: You configured a custom Authentication Provider or WLS generic LDAPAuthenticator, which the libOvd can not recognize. Supply the idstore.type property in jps-config.xml file, or use a specific WLS LDAP Authentication provider that matches your LDAP server instead of a generic one.
at oracle.security.jps.internal.api.identitystore.IdentityStoreConfigurationUtil.checkIdStoreTypeLater(IdentityStoreConfigurationUtil.java:819)
at oracle.security.jps.internal.api.identitystore.IdentityStoreConfigurationUtil.getLibOvdLdapPushData(IdentityStoreConfigurationUtil.java:524)
at oracle.security.jps.internal.igf.ovd.OvdIGFServiceProvider$1.run(OvdIGFServiceProvider.java:232)
at oracle.security.jps.internal.igf.ovd.OvdIGFServiceProvider$1.run(OvdIGFServiceProvider.java:229)
at java.security.AccessController.doPrivileged(Native Method)
Truncated. see log file for complete stacktrace
>
<Jan 29, 2013 6:39:05 AM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Jan 29, 2013 6:39:05 AM CST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Jan 29, 2013 6:39:05 AM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state cha
Error Codes
Problem Category/Subcategory
BI EE Platform Administration/Administration Tool
Uploaded Files
File: nohup.zip:134848
Template Question Responses
1) ### Admin Tool version ###
2) Are you running Oracle Business Intelligence Enterprise Edition using virtualization or partitioning technologies (for example, VMWare) ?
No
3) If yes, please provide the product used and its version.
4) ### Documentation Used ###
5) ### Impact on Business ###
Edited by: 919942 on Jan 31, 2013 5:10 AM

"JPS-02597: You configured a custom Authentication Provider or WLS generic LDAPAuthenticator, which the libOvd can not recognize. Supply the idstore.type property in jps-config.xml file, or use a specific WLS LDAP Authentication provider that matches your LDAP server instead of a generic one."
Looks like the config you entered was a tad off. Any chance you can roll back by restoring the original files from before the change?
$FMWH/user_projects/domains/yourdomain/config/config.xml
$FMWH/user_projects/domains/yourdomain/config/fmwconfig/jps-config.xml
In the config.xml, inside the <realm> tag yo ushould find your authenticaiton providers and there's two important things for your new one to check:
1.) xsi-type="wls:..." <-- This should be your OID type rather than a generic (or wrong) one
2.) If you're not 100% sure about the config or don't want to immediately shut out native WLS users or want to retain them (both OID and WLS LDAP considered valid), then PLEASE make sure that you run your new authenticator with <sec:control-flag>SUFFICIENT</sec:control-flag> and don't make it REQUIRED since otherwise you won't be able to bring anything up anymore if a single parameter in the authenticator config is off...
Also, check out what Tony wrote together a while back: http://www.peakindicators.com/index.php/knowledge-base/115-oracle-bi-11g-security-troubleshooting
Update:
Should have read the error message more carefully...looks like you actually just slipped by one line in the authenticator config and chose "OracleVirtualDirectory" instead of "OracleInternetDirectory" since it tries to use the libOvd rather than the OID one.
Edited by: Christian Berg on Jan 31, 2013 2:58 PM

Problem with LDAP configuration in Enterprise Manager

Hi all,
I'm new at Java CAPS. After install some pieces of Java CAPS now I'm trying to install and configure a Sun Java System Directory Server 5.2 in our environment.
I've already configured the Repository and the Logical Host to work with the ldap, but I have some troubles to do it with the Enterprise Manager.
I followed the instructions of the Administrator guide about the changes to do in web.xml and ldap.properties of the sentinel app but when I do login the Enterprise Manager I can't see the options of the tree to manage servers or users.
It seems that the app don't recover the user roles. I think so becouse I tried to create one user without roles (in normal authentication, without ldap configured) and when I did login in the result was the same.
At the beginning of the process I created the roles 'all', 'administration' and 'management'. However I tried to copy de roles of the Tomcat authentication from 'tomcat-users.xml' to ldap roles, but it doesn't work.
Anyone could help me?
Thanks in advance, and sorry for my rudimentary English

Check that you have the correct Preferred Credentials with Logon as batch job if this is windows. Also check the correct configuration with regards LDAP integration for you platform.

SSIS 2012 package runs under SSDT but fails with permission error from SSMS

I have a simple package that pulls data from a text file located on a Windows file server that runs successfully from SSDT on my client.
However, when deployed and running the package via SSMS from the client, the package fails with a permission error, with the error stating that the data file could not be opened.
I have done some investigation and have seen some info that states that a package run from SSMS runs under the account on which you are logged on to the machine, which I would have thought is correct. This is therefore the same account when running from
SSDT (which works) and I can see from the SSIS Report that the 'Caller' is stated as my account, so if this is the case why isin't the package working.
I've also seen an MSDN forum answer which stated the opposite that the package when run from the IS Catalog in SSMS doesn't run under the account on which the client is logged on with, which is the opposite of the above, but doesn't indicate which account
it is using.
So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?
If it is the account on which you are logged onto the client running SSMS, why is it not working when the account has the necessary permissions (as provent when running from SSDT) ?

I am aware it's using my account and not one of the service. There's nothing in the posts above which suggests I'm using the service account. I don't know why people keep assuming that I'm running the package from a job. I've never stated that in any of
the posts I'm running the package from a job. It's been made quite clear I'm running the package from the IS Catalog on SSMS:
"This is simply selecting a package from the IS Catalog, right-clicking and selecting Execute package.", as per the Nov 18 post, and in the original post "....So what account is being used to run SSIS 2012 packages from the IS catalog from
within SSMS".
Just to be clear, the package is NOT being run from a job. It's using the Execute package option when selecting the package within SSMS from the IS Catalog and it's running under the account on which I am logged on to my client.
Please read carefully. I was just answering your question "So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?" and stating that you where right and that it uses your account to run the package
when you execute a package manually from the Catalog and that you can prove that by logging the system variable.
A good suggestion about using a share in the task to map the drive and I will try this. I would find it strange that SSMS requires this mapping whereas SSDT does not though.
Ok let us know your findings. If it doesn't work you can also test it with a password and username:
net use f: \\financial\public yourpassword /user:username
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

AppContainers_test fails with error during pre-test configuration checks

Hello,
AppContainers_test fails with error during pre-test configuration checks:
"[FAIL] The machine is not properly configured for testing: the test directory "C:\Windows\SYSTEM32\" is not ACL'd to allow execute permission for "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES"
But that kind of permission for APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES was allowed, also i tried to allow full access, but error was the same.
In the test WindowsFilteringPlatform_Tests, the same requirement "REQ - Wfp-based products must not block App Container apps operating within their declared network intentions by default" was checked successfully.
How can i pass successfully AppContainers_test?
I installed lastest versions of QFE and filters on my server, but it didn't help.

Hi M'Alerter,
I have the same issue, have you found a solution to your problem ?
Cheers,
Ghalem

LDAP configuration un UPM under Site fails with correct info

Similar Messages

Maybe you are looking for