LDAP connection with windows catalogue server

Hi Gurus,
I want your help for below issue
Requirement is there is one customized table which will be accessed by SM30, user will enter user id and its email address should come automatically from windows global catalogue server(Non-SAP system), For this i referred one doc attached below
http://santy.wdfiles.com/local--files/sap-pages/SAP_User_Mgmt_Via_LDAP.pdf
According to this seems RFC creation, LDAP connector configuration, and LDAP server configuration required in SAP, i have asked basis team to do the same.
Now my question is is this the responsibility of Basis team to configure LDAP connector and LDAP server also how i can access LDAP directory through ABAP program?
please help me step by step if possible.

Reinfire,
I tried your terminal window patch but it failed to solve my issue. Most people seem to be trying to connect to NAS devices from their Macs. In my case, all my data is on a Drobo hanging off my Mac Pro. I've been using SMB to share video from my Mac to both a Boxee Box and a Raspberry Pi running Openelec (XBMC). While both these devices can handle afp, the old Boxee Box is less than astute with afp so SMB was the method of choice for stability.
Anyway, both devices can no longer see the SMB shares off the Mac Pro, even after your patch. After runnig you patch, I restarted and the nsmb.conf file is created. But, no luck on connecting with these apparently non SMB2 devices.
I can change all my shares over the afp but this will take a lot of button pushing that I'd rather not do. Any suggestions for this scenario?

Similar Messages

Mavericks Broke connection with Windows Home Server - SMB

I have the original version of Windows home server and all connections were fine over SMB, but after the upgrade to maverick I cannot connect to my shares.
Before I used the guest account, so I created an addtional account for testing. I can see this account get locked out on the WHS, so I know its talking to it.
I have 6tb of photos and itunes data on my server and looking for any way possible to configure my imac to connect again. When I try now there is no error, the user name and pw box just shakes and produces no errors.
Please help
Thanks,
Tom

Reinfire,
I tried your terminal window patch but it failed to solve my issue. Most people seem to be trying to connect to NAS devices from their Macs. In my case, all my data is on a Drobo hanging off my Mac Pro. I've been using SMB to share video from my Mac to both a Boxee Box and a Raspberry Pi running Openelec (XBMC). While both these devices can handle afp, the old Boxee Box is less than astute with afp so SMB was the method of choice for stability.
Anyway, both devices can no longer see the SMB shares off the Mac Pro, even after your patch. After runnig you patch, I restarted and the nsmb.conf file is created. But, no luck on connecting with these apparently non SMB2 devices.
I can change all my shares over the afp but this will take a lot of button pushing that I'd rather not do. Any suggestions for this scenario?

How to make SAP B1 connection with Windows Sharepoint Service 3.0

how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
public bool ConnectToCompany()
            oCompany = new SAPbobsCOM.Company();
            oCompany.Server = "192.168.1.58";
            oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
            oCompany.CompanyDB = "SBODemoUS";
            oCompany.DbUserName = "sa";
            oCompany.DbPassword = "abc";
            //oCompany.UseTrusted = true;
            oCompany.UserName = "manager";
            oCompany.Password = "manager";
            oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
            oCompany.LicenseServer = "192.168.1.58:30000";
            int i = oCompany.Connect();
            if (i != 0)
                return false;
            return true;
protected override void RenderContents(HtmlTextWriter writer)
            if (conn.ConnectToCompany() == true)
                writer.Write("Hello" + this.Context.User.Identity.Name);
Edited by: bikalg on Nov 28, 2010 9:43 AM

Hi.......
Welcome to SAP Business One Forum.....
Unfortunately this is the wrong forum you posted here.
I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
Regards,
Rahul

Failed to Establish Connection with SQL Database Server (EAS)

Hi,
We have recently installed version 11.1.2.1 of essbase. Everything is working just peachy. One of my users tried to build a load rule using an Oracle ODBC data connection and gets the error:
Failed to Establish Connection with SQL Database Server. See log for more information.
When I look in the log I see this:
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1013091)
Received Command [SQLListDsn] from user [mressler@EnCanaAD]
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1013091)
Received Command [SQLRetrieve] from user [mressler@EnCanaAD]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021004)
Connection String is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021041)
Connection String is [DSN=Test;UID=...;PWD=...;]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021006)
SELECT Statement [SELECT '1' from dual] is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Warning(1080014)
Transaction [ 0x140002( 0x4f4cfd87.0x7b890 ) ] aborted due to status [1021001].
I have tested that the ODBC connection can connect to the database. The sql query has been dumbed down to select '1' from dual. I have not included the word "select" in the query.
Anyone seen this before? We are in the process of uninstalling the Oracle client completely and re-installing it to see if this solves the issue. We only installed the 64 bit version of the Oracle client. I am running on Windows Enterprise 2008 R2 - 64 bit. EAS, Essbase, EIS are all 64 bit installs. I believe Studio is the only one that is 32bit. However we are not currently using this product.
Thanks,
Mike

Hi Mike,
With Oracle Support's help, we got 3 of the 5 servers working now. We were using the Datadirect drivers but were configuring them wrong! You have to use the Standard Connection portion in the setup, specifying the Host, Port Number (1521) and the SID. We were using the TNSNames Connection which worked in the past, but apparently does not now.
So I am down to 2 servers not working. They are both Windows 2008 R2 Enterprise 64 bit, running Oracle EPM Essbase 11.1.2.1. When I Open SQL in EAS it prompts for database (Essbase Server, App, DB) and when I hit ok it pops up with "Network error: Cannot Locate Connect Information For []". We did not do any of the suggestions in the document you linked to get the other 3 servers working. When you hit ok on that error, you then get another error stating, "There are no Data Sources defined. 'SQL data sources' option will be disabled". We do have datasources defined on the server.
Any ideas?
Thanks,
Mike
Edited by: Mike on Mar 1, 2012 8:38 AM

Error: 1021001 Failed to Establish Connection With SQL Database Server

Hello,
Someone you already MEETS it the following error during an essbase retrieve DLR.
My client oracle essbase on my server is 64bit, Essbase 11.1.2.2 x64
I run the odbc located in% windir% \ system32 \ odbcad32.exe
"Error: 1021001 Failed to ESTABLISH Connection With SQL Database Server. See log for more information"
Here is the log:
Received Command [SQLListDsn] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local / CAS_TEST / / / 8168/Info (1042059)
Connected from [10.100.50.2]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1013091)
Received Command [SQLRetrieve] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021004)
Connection String is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021041)
Connection String is [DSN = TEST_ORACLE; UID = ...; PWD = ...]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021006)
SELECT Statement [SELECT from dual;] is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft] [ODBC Driver Manager] Driver's SQLAllocHandle we failed SQL_HANDLE_ENV]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021014)
ODBC Layer Error: Native Error code [0]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Error (1021001)
Failed to ESTABLISH Connection With SQL Database Server. See log for more information
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Warning (1080014)
Transaction [0x780001 (0x50659d19.0xc9e78)] aborted due to status [1021001].
When I try to go through OCI service name:
dbServerName: port / service_name
I have the following error message:
Solutions2: List of members 1423.CAS_TEST.CAS_TEST September 28, 2012 2:50:15 PM CEST Succeeded
Read SQL record September 28, 2012 2:50:35 PM CEST Failed
thank you in advance
Edited by: 851398 on 28 sept. 2012 06:31

In essbase logs there is nothing special, same for windows log.
Everything I like is log in log view eas
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database State]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7580/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6720/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6720/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7304/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7304/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7572/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7572/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8116/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8116/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7384/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6592/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6592/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7972/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7972/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///216/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/216/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3104/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3104/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3472/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3472/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8112/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8112/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3840/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3840/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7760/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7760/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7300/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7300/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7904/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7904/Info(1013091)
Received Command [OtlQuerySmartLists] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3612/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3612/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6732/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6732/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7576/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7576/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7268/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7268/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:27 2012]Local/CAS_TEST///7556/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST///8168/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST/CAS_TEST/admin/8168/Info(1013091)
Received Command [SQLListDsn] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST///7564/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1013091)
Received Command [SQLRetrieve] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021004)
Connection String is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021041)
Connection String is [DSN=TEST_ORACLE;UID=...;PWD=...;]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021006)
SELECT Statement [SELECT * from dual ] is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Warning(1080014)
Transaction [ 0xb50001( 0x5065c7d7.0x31ce0 ) ] aborted due to status [1021001].
Have you an idea about the Merant driver to essbase?
Thank

Essbase Studio - Failed to Establish Connection With SQL Database Server

Hi all,
I am new to Hyperion and am having trouble deploying what seems a simple cube in Essbase Studio.
My environment is Windows 2003, EPM 11.1.1.2, SQL Server 2000.
I have the following two issues which may be related.
1. The EPM System Diagnostic tool says that Hyperion Foundation cannot connect to the SQL database.
Error:
Failed: Connection to database
Error: java.net.UnknownHostException: <server name: <server name>
Recommended Action:
Every other EPM application is able to connect to the database. I have tried re-configuring Foundation Services and checking the config files and nothing looks wrong. I would appreciate advice on how to fix this.
2 In Essbase Studio, I was able to connect to the database where the source data is, build the minischema and create dimensions and measures. But when I run the cube deployment wizard I get the error:
Message: Failed to deploy Essbase cube
Caused By: Failed to build Essbase cube dimension: (Time)
Caused By: Cannot incremental build. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server. See log for more information
…ODBC Layer Error: [08001] ==> [[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied.]
I have checked the DSN as well as the connections set up within Studio, and they are all able to connect to the database. I am using the admin user for the Essbase server and have created a different user for the databases where the data resides and the shared services database. I tried using the same user all the way through and this didn’t help.
Can you please advise what else I can check or change to resolve this issue.
Also, can you work in EAS with cubes that are created in Studio? I tried looking at it and I got an error that the rule file couldn’t be accessed because it was created in Studio.
After the above failures, I tried creating a cube in EIS, with mixed success. I have been able to load the members and data without errors. But when I try to view the data in the cube, I am seeing field names for the measures instead of the data itself.
...Definitely more questions than answers at this stage of my learning.
Regards
Michelle

Michelle,
I don't know if you found an answer to you question after so many months but I was hoping I could be helpful.
The issue you are experience happens often when the dimension that you are getting an error on, in this case TIME, is built from a snowflake lineage and there is a bad foreign key reference. This dimension is most like high-up in your outline build process for Essbase Studio and this prevents the build from happening usually early on.
Check your logs also. They are in Hyperion > Products > logs > essbase > essbasestudio.
You can also make your logs more verbose by setting a configuration variable in the essbase studio server.properties file but that should only be used for debugging as it really saps performance.
And, yes, you can of course edit an Essbase Studio deployed cube in EAS. However, any changes you make to the cube in EAS are subject to being wiped-out upon the next Essbase Studio deployment of that Applicaion/Database combo.
If you want to provide more detail, screenshots, etc. I would be glad to help where I can.
Cheers,
Christian
http://www.artofbi.com

SQL 2012 installation Error-The MOF compiler could not connect with the WMI server

Hi all,
I am getting below error while installing SQL 2012 Dev edition in Win 8.1 Pro.
I am facing lot of issues while installing SQL 2012 in Win 8.1 Pro.Any other steps we need to take to install SQL 2012 in Win 8.1.
Thanks in advance.

Installation:
Installation for SQL Server 2012
Hardware and Software Requirements for Installing SQL Server 2012
Installing the .NET Framework 3.5 on Windows 8 or 8.1
About "The MOF compiler could not connected with the WMI server" error message:
Please, verify the Windows Management Instrumentation has status "started" and is set with Startup Type "Automatic". (Alberto Morillo, SQLCoffee.com).
José Diz Belo Horizonte, MG - Brasil

JMX Connectivity with the Adminstration Server - Weblogic 9.x

When using the java naming provider url in Managed Server startup script, or in server start tab when using node manager, or loading it from properties file (for deployment) we see below JMX Warning message in Managed Server startup log saying JMX connectivity exception with Admin Server. This is BUG in Weblogic 9.x release and there is CR open on this issue.
<May 19, 2009 10:35:25 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.149.181.55:20001
for protocols iiop, t3, ldap, http.>
<May 19, 2009 10:35:25 AM EDT> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ManagedServer1_1
" for domain "wls923_domain1" running in Production Mode>
<May 19, 2009 10:35:25 AM EDT> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster
successfully. Log messages will now be broadcasted to the domain log.>
<May 19, 2009 10:35:25 AM EDT> <Warning> <JMX> <BEA-149509> <Unable to establish JMX Connectivity with the Adminstration
Server AdminServer at service:jmx:t3://AdminServer:20000/jndi/weblogic.management.mbeanservers.domainruntime.
java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblogic.management.m
beanservers'
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:151)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:326)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeService.getDomainMBeanServerConnec
tion(RegisterWithDomainRuntimeService.java:199)
Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblog
ic.management.mbeanservers'; remaining name 'domainruntime'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:171)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
>
<May 19, 2009 10:35:26 AM EDT> <Notice> <Cluster> <BEA-000102> <Joining cluster Cluster1 on 239.192.23.2:7001>
- - Tarun

When using the java naming provider url in Managed Server startup script, or in server start tab when using node manager, or loading it from properties file (for deployment) we see below JMX Warning message in Managed Server startup log saying JMX connectivity exception with Admin Server. This is BUG in Weblogic 9.x release and there is CR open on this issue.
<May 19, 2009 10:35:25 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.149.181.55:20001
for protocols iiop, t3, ldap, http.>
<May 19, 2009 10:35:25 AM EDT> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ManagedServer1_1
" for domain "wls923_domain1" running in Production Mode>
<May 19, 2009 10:35:25 AM EDT> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster
successfully. Log messages will now be broadcasted to the domain log.>
<May 19, 2009 10:35:25 AM EDT> <Warning> <JMX> <BEA-149509> <Unable to establish JMX Connectivity with the Adminstration
Server AdminServer at service:jmx:t3://AdminServer:20000/jndi/weblogic.management.mbeanservers.domainruntime.
java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblogic.management.m
beanservers'
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:151)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:326)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeService.getDomainMBeanServerConnec
tion(RegisterWithDomainRuntimeService.java:199)
Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblog
ic.management.mbeanservers'; remaining name 'domainruntime'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:171)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
>
<May 19, 2009 10:35:26 AM EDT> <Notice> <Cluster> <BEA-000102> <Joining cluster Cluster1 on 239.192.23.2:7001>
- - Tarun

IDES 46E with windows 2003 server Installation errors..

Hi,
Can some body help me in IDES 46E with windows 2003 server Installation?.I'm tired of installing with this combination on my desktop my env as follows.
1.Windows 2003 Server
2.JDK.142
3.Oracle 9.0.2 with 7 patch
4.IDES 46E
Installed successfully Database and SAP but while exporting data in to tables then getting errors.
Thanks in advance..
Sreedhar

Hi GreetZ,
I opened the respective 3200,3300,and 3600 ports and I can access my router from outside home.I can also ping <IPAddress> and telnet<IPAddress> successfully.But I'm unable to telnet <IPAddress><space>3600 giving error..connection failed on port 3600 and same error for remaining ports too.Pls help me in fix this issue.
Thanks for your replies..
Sreedhar

ORA-03135 connecting with Windows 7 via VPN

Can you please help me.
I am unable to connect with Windows 7 clients (x32 also x64) to a database 10.2.0.5 running on a Windows 2008 R2 x64 Server
Oracle Client Version: 10.2.0.3
always raises an ORA-03135 error!!!
But with a Windows XP Clients (same Oracle Client Settings) its working without problems. No connections problems!
We use a SonicWall Firewall where all Traffic (SQLNET,..) is allowed for testing!
CLIENT: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
SERVER: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
Some Trace Infos:
Oracle Client:
(1256) [25-NOV-2010 11:23:38:997] ntt2err: entry
(1256) [25-NOV-2010 11:23:38:997] ntt2err: soc 1992 error - operation=5, ntresnt[0]=517, ntresnt[1]=54, ntresnt[2]=0
(1256) [25-NOV-2010 11:23:38:997] ntt2err: exit
(1256) [25-NOV-2010 11:23:38:997] nttrd: exit
(1256) [25-NOV-2010 11:23:38:997] nsprecv: error exit
(1256) [25-NOV-2010 11:23:38:997] nserror: entry
(1256) [25-NOV-2010 11:23:38:997] nserror: nsres: id=0, op=68, ns=12547, ns2=12560; nt[0]=517, nt[1]=54, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
(1256) [25-NOV-2010 11:23:38:997] nsrdr: error exit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: nsctxrnk=0
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: error exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: wanted 1 got 0, type 0
(1256) [25-NOV-2010 11:23:38:998] nioqper: error from nioqrc
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns main err code: 12547
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns (2) err code: 12560
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt main err code: 517
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt (2) err code: 54
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt OS err code: 0
(1256) [25-NOV-2010 11:23:38:998] nioqer: entry
(1256) [25-NOV-2010 11:23:38:998] nioqer: incoming err = 12151
(1256) [25-NOV-2010 11:23:38:998] nioqce: entry
(1256) [25-NOV-2010 11:23:38:998] nioqce: exit
(1256) [25-NOV-2010 11:23:38:998] nioqer: returning err = 3135
(1256) [25-NOV-2010 11:23:38:998] nioqer: exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: exit
(1256) [25-NOV-2010 11:23:38:998] nioqds: entry
(1256) [25-NOV-2010 11:23:38:998] nioqds: disconnecting...
(1256) [25-NOV-2010 11:23:38:999] nsclose: entry
Server Traces:
nttrd: socket 4172 had bytes read=0
nttrd: exit
nsprecv: error exit
nserror: entry
nserror: nsres: id=0, op=68, ns=12535, ns2=12560; nt[0]=505, nt[1]=60, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsrdr: error exit
nsdo: nsctxrnk=0
nsdo: error exit
nioqrc: wanted 1 got 0, type 0
nioqper: error from nioqrc
nioqper: ns main err code: 12535
nioqper: ns (2) err code: 12560
nioqper: nt main err code: 505
nioqper: nt (2) err code: 60
nioqper: nt OS err code: 0
nioqer: entry
nioqer: incoming err = 12151
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
Thx

always raises an ORA-03135 error!!!
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
ThxThis is network related problem,may be network very slow.When error occur then execute tnsping <netservicename> command and see that happen.

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC. So the first thing I would try and do is plug the iPod into a different USB port on your PC. Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
Lastly, plug the iPod into another PC to see if it's recognized there. If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
B-rock

TS1369 why doesnt my 5th gen ipod nano not connect with windows 8?

why doesnt my 5th gen ipod nano not connect with windows 8?

Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

ISight - connects with windows users no problem?

I'd like to buy this webcam, but I heard it has problems connecting with windows users. Will I be able to talk to people on it through AIM? Thats what I'd like, if not, I probably wont get it. Anyone have any personal experience or have any answers or helpful tips - I'd appreciate anything - thanks.

It is not the iSight itself that gives you the impression that connecting with Micros~1 Windows users causes problems ... it is the availability of (cross platform) applications that makes connecting a bit more cumbersome.
I have PowerMac G5 with iSight and I connect with my Micros~1 Windows platform family equiped with and without USB webcam.
The challenge will be to find messaging / VoiP applications with bearable audio quality and reasonable video performance.
I started with Skype for Voice and Yahoo! messenger for bad video ( 1-2 fps and video size 320 x 240).
Skype has a video plugin (only for Windows)
Yahoo! Messenger does not have voice yet (2.5.3)
MSN is badmouthing because of the "M"
I have used iChat with another Apple believer ... and the quality of Voice and Video is unparralled.
The best two alternatives I found are:
a) AIM 5.9
b) Trillian (www.trillian.cc)
Both use a free AIM screen name.
AIM works fine, see also EZJim pages.
TrillianPro 3.1 reuses AIM screen names ... and ... it has both good audio and zoom-to-full-screen-video size with fps rates filling your bandwidth.
The only negative on Trillian so far, the "handshake" for connecting two people takes some time.
TrillianBase is free but has no Video capabilities. The Pro version is 25$.
Regards Coen
ps. if you want to test your setup use my AIM screenname: coenjeukens

The MOF Compiler could not connect with the WMI server

I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI Server to start".
I checked on the WMI services, they are started and running.renamed the WMI repository. but nothing worked .
Any idea what settings I need to change in order to ensure a successful instalation and add node 2 to sql cluster.

Hi,
Did SQL Server failed during installation and you somehow brought services online. Or it failed and next time you executed it succeeded IMO this error pops up because of remnants of failed installation on Node 1. With cluster specially if Installation on
node 1 fails you should uninstall completely and remove all files related to SQL Server and then proceed.
Have a look at below connect,see workaround and information posted by MS
https://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server
If above still not helps please post complete setup log file
%Program files%\Microsoft sql server\100\Setup bootstrap\Log\ folder.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

LDAP connection with windows catalogue server

Similar Messages

Maybe you are looking for