Ldap groups

Hi,
I have 5 roles and each role selection should provision user to a seperate ldap group + a default ldap group.
How can i achieve that...
dn: cn=group1,ou=people,o=domain,o=com
+ dn:cn=mail,ou=people,o=domain,o=com
Where cn=mail is common for every role selection. I have a variable temp which generates group values based on role selection and i am mapping it in identity template. i think that will provision the user to one group. How can i provision the user to the default group.
Any ideas?

Hi,
Here is one suggestion:
Edit each the role using the admin pages under the Roles Tab, you will see
a section called Assigned Resources, where you can set resource attribute values.
Here you can override the ldapGroups attribute for your ldap resource.
ldapGroups is a List, so you want to add a specific <s>cn=...</s>
string to the existing ldapGroups list. This seems to work well and no xml editing required!
The effect of this will be that different dns will get added to the ldapGroups
variable, depending on which role gets assigned to the user.
Does that make sense? hope this helps.
As for the default dn (cn=mail...), you can either do it the same way (but call a rule rather that replicating the dn 5 times for each resource), or put that into the userform
that gets invoked.
I'm not sure if I explained this well enough, I hope this helps,
John I

Similar Messages

Error while adding LDAP group

Hi, I configured LDAP authentication on BOXI R2 SP3 on IIS. The settings are as given below.
To change a setting, click on the value to start the LDAP Configuration Wizard. I have replaced few entries with XXXX and YYYY due to security.
LDAP Hosts: nccXXX.XXX.YYYY.XX.YY:636
LDAP Server Type: Novell eDirectory
Base LDAP Distinguished Name: ou=XXXXX,dc=YY
LDAP Server Administration Distinguished Name: cn=XXX,o=YYYYY
LDAP Referral Distinguished Name: ""
Maximum Referral Hops: 0
SSL Type: Server Authentication
Server Side SSL Strength: Always accept server certificate
Single Sign On Type: None
When I add any new group then its not added and I get below error message in the Logging directory for WCA.
Error: 2009-08-24 14:56:30, Thread:161, WriteData::_Flush catch unexcepted exception, source: System.Web, message: Specified argument was out of the range of valid values.
Parameter name: offset, stack: at System.Web.HttpResponseStream.Write(Byte[] buffer, Int32 offset, Int32 count)
at BusinessObjects.Enterprise.WebComponentAdapter.WriteData._Flush(IntPtr handle)
Can anyone help to find if LDAP is configured correctly before adding group?
Thanks,

Resolved. It was due to wrong LDAP group given to me.
Thanks,

Can an email address be a member of an LDAP group even if it isn't associated with an object in the Directory Server?

Can an email address be a member of an LDAP group even if it isn't
associated with an object in the Directory Server?
<P>
General members of a group are the members defined in the
Directory Server. They are full-fledged members of the group who
may have a set of permissions associated with their membership,
a title, or other attributes. Mail-specific users are users who
are not full-fledged members of the group, but who receive mail
sent to the group. Mail-specific users need not be identified as
a user in the Directory Server--an email address is sufficient.
An example of this is a group of salespeople, all of whom are in
the group "North American Sales Team." They have access to a
sales-tracking database, on-line quota information, and
competitive information. The mail-specific users of this group
are the admins who support the members of the sales team, who need
to get the mail that goes out to the group, but don't need access
to the applications and information that the salespeople do.

Hey EllyK,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
I would suggest performing this workaround and then try to login to BlackBerry Link:
Open BlackBerry World on the BlackBerry smartphone and sign in using the BlackBerry ID.
Connect the BlackBerry 10 smartphone to the computer.
Open BlackBerry Link
Sign in using the BlackBerry ID.
Let me know if the issue still persists.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Mapping LDAP Groups to SAP Roles

Hi there,
i am trying to build up a synchron usermanagement with a LDAP-Server between EP, Web AS Java and Web AS ABAP.
My thought is to administrate the users in the LDAP-Directory. The users will be assigned to groups.
In EP and Web AS Java its no problem to assign these groups to roles and then just change the Users in the LDAP-Group and reach a synchron usermanagement.
In Web AS ABAP it seems impossible to assign roles to groups.
<b>The question is, is it possible to map ldap groups with the ldap connector of the web AS ABAP to Roles in an ABAP System?</b>
Or is there another way to administrate users in different systems?
Thanks alot for your answers,
stefan

Hi
in this case u have to use the concept of central user administration. use the following links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/asug-biti-03/cua with sap webas, ldap and third party software
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-04/user management and authorizations overview.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/nw/dotnet/integration of sap central user administration into microsoft active directory.pdf
hope this helps u to get fair bit of idea
don,t forget to give points
With regards
subrato kundu

LDAP groups and WebLogic Roles - Urgent ( weblogic 6.1 sp1, iPLanet 5.1)

I have 2 questions and these are very urgent :-
1. Where the mapping can be defined between LDAP groups and WebLogic Roles. I have
2 groups in iPLanet :- Contarctors and employees and I have 2 security roles in weblogic:-
contractactors and employess. How do I map LDAP group contractors to weblogic security
Role contractors? Similarly for employees ?
2. I have not defined contarctors and employeees under People container in IPlanet.
e.g. The RDN for contractor is
uid=1234,ou=dir,dc=orams,dc=com
Can I still use the defualt security realm of weblogic (the WebLogic Security Realm
under People ) OR I have to write my own custom code ?
3. I am planning to use Roles insetad of groups to manage the logical grouping in
iPLant. Can I still use the groups in WebLogic security realm ( in the configuratin
parameters ?)
This is very urgent ....so if any of you can throw any hints that will be greatly
appreciated.
--Sunita

Hi Ariel,
The driver is bundled with the product in WLS 6.1sp1. you don't have to
download any additional driver. Use it as you normally would only thing to
remember is if you are trying to write standalone java code then you have to
have weblogic.jar in your classpath. For the rest of the info follow the wls
docs for 6.1
HTH
sree
"Ariel" <[email protected]> wrote in message
news:3bb4a643$[email protected]..
We want to connect our Weblogic 6.1 sp1 server to a SQLServer 2000 db. We
downloaded the JDriver from bea.com, but all the istructions that camewith
it are for WLserver 5.1.
What has to be done to do this with 6.1 sp1?
Thanks,
Ariel

RSA authentication with LDAP group mapping

Greetings,
I'm trying to set up RSA authentication with LDAP group mapping with ACS Release 4.2(1) Build 15 Patch 3.
The problem I'm having is that my users are in multiple OU's on our AD tree. When I only put our base DN in for User Directory Subtree on ACS, it fails with a "External DB reports about an error condition" error. If I add an OU in front of it, then it will work fine.
As far as I know, you can only use one LDAP configuration with RSA.
Any thoughts on this?

@Tarik
I believe your suggestion is the only way i'm going to get this to work. I ran across a similar method just this week that I have been working on.
I was hoping for dynamic mapping with the original method, but I haven't found any way to make it happen. I have resorted to creating a Radius profile on the RSA appliance for each access group I need. Using the Class attribute, I then pass the desired Group name to the ACS, i.e. OU=Admins, and that seems to work.
Thankfully, I have a small group of users that I am attempting to map. I will only map those who need elevated priviliges to narrow down how many profiles I will have to manually create. Likewise, our Account Admin will have to determine who gets assigned a particular access group.
I would still prefer to do this dynamically.
Scott

LDAP Groups Authorization

Hi,
I have read some of the forum threads about LDAP Group Authorization - I remain confused. Here's the problem I am trying to solve.
I was successfull in setting my Authentication to "Based on authentication scheme from gallery:Existing Login Page: Use LDAP Directory Credentials" -
That works fine, But I would not like all users in my OID LDAP directory to log into my application- Which is why I have created a group for the user I want to include in my OID directory.
Now at the " Builder->Application...->Security->Authorization Schemes->
I have created an Authorization Scheme as "PL/SQL Function returing a booloean" .
My Scheme Source(Identify Query or PL/SQL) is as follows and is set to "once Per session"
return wwv_flow_ldap.is_member
(:APP_USER,
null,
'cn=users,dc=wellesley,dc=edu',
'jadeland.wellesley.edu',
'389',
'wcd_HTMLDB',
'cn=portal.040323.1220,cn=Groups, dc=wellesley,dc=edu');
where in my LDAP directory, 'wcd_HTMLDB' is the subgroup under group "portal.040323.1220" -
I have included 3 users in the group 'wcd_HTMLDB' .
Still the login page allows all LDAP user ( and not just the 3 from the 'wcd_HTMLDB' group.
Where did I go wrong -?
What 's the proper way to authorise only LDAP users in a group ?
Any help would be really appreciated.
Thanks .

Indira,
The public synonym (and grant execute) must be created after that package is compiled which can happen after catldap is run in your database. This is only a problem if catldap has not been run before HTML DB is installed. That's described in the flows/doc/ldap.html file in the distribution directory (not very prominently, we know).
When you initially attached the authorization scheme to your login page and it wouldn't let you in, the reason is that it was using the value of APP_USER to drive your lookup function. But when the login page is rendered, APP_USER is null because you haven't logged in yet. So a user-based authorization scheme on a login page can never work.
When you changed the ldap username edit function the way you did, you achieved the goal of preventing an unauthorized user from using the login page to authenticate. Looks like the way it's set up is to give unauthorized users an authentication error, which is a little misleading (saying their credentials are invalid when in fact they are valid but they aren't authorized to use your application), but if it suits your purpose, great. You should consider that if you change the authentication method to, say Single Sign-On, you'll then want to use authorization schemes to keep unauthorized users out. So the authorization scheme that you first set about using would be fine in that case, so long as you adjust the code to allow for visits to public pages prior to authentication (v('APP_USER') = 'HTMLDB_PUBLIC_USER'). However, you'd want to attach that scheme to the application itself (Edit Application Attributes->Authorization) so it fires on every page. Evaluating a scheme like that on every page view rather that once per session probably works best, even better if you cache the result of the evaluation yourself for performance reasons, e.g., set an application item to some value the first time the authenticated user passes the ldap membership test, then using that item as an 'already passed' flag for subsequent invocations.
Finally, I assume you are using the built-in ldap_dnprep function because you need to replace '.' with '_' in the username value entered by the user. If that is not your requirement, let's talk.
Scott

Cannot Add user to CMC Group when they are a member of LDAP group

On PreProduction Server CMC
Softerra LDAP browser used to verify user is a member of LDAP group
User does not show as a member of that group in the CMC
Cannot add user to LDAP group showing in CMC, the same group shows the member in LDAP browser
On Production Server CMC
For kicks I logged into the CMC on Production and I found the user is correctly showing as a member of the Group
Why doesn't the groups in CMC show what is actually showing in the LDAP browser?

Hi,
Check if you have also mapped in both servers the same groups. It might be that there are some groups missing in the Pre-prod.
Also, try restarting the CMS. I have seen similar issues that are solved after forcing the recreation of the graph.
If after the restart you still can't see the groups, check the mapping on the LDAP server. It might be that both servers do not use the same attribute mappings.
Regards,
Julian

Webcenter dicussion forum - Ldap Group Integration with JSSO

Hi,
We want to implement LDAP Group integration for the authorization purposes in
webcenter Jive Disucussions deployed in our IAS 10.1.3.2 application server.
Though jive provides support for the same, yet the JIve documentation says
that we need to implement the JIve's LDAP User authentication steps in order
to leverage LDAP Groups integration. In case of Webcenter if we use Java SSO
for the authentication purpose, we need opt for the 'Default' in the Jive
Admin's authentication page instead of LDAP settings. Opting for 'Default'
scheme doesn't allow us to configure the LDAP group settings. We are not able
find any documentation for LDAP Group Integration along with Java SSO. Could
provide us the steps required for the same? Or has anyone tried the same?
Thanks and Regards,
ABhijit

Hi Abhijit,
You can ignore 'Default', and implement your own user authentication mechanism, which can include LDAP group settings. You will have to follow:
- OC4J security documentation for using Java SSO in your own implementation (I think this is the right link - confirm the version numbers - http://download.oracle.com/docs/cd/B32110_01/web.1013/b28957/javasso.htm#BABEJFDI)
- Jive documentation for implementing user authentication
Navneet.

Managing LDAP groups and roles through SUN IDM

Hi Guys,
We have a requirement to build the following functionality in our Sun IDM tool.
1.     Ability to create/manage Static LDAP group.
2.     Ability to create/manage filtered LDAP group.
3.     Ability to create/manage Static LDAP roles.
4.     Ability to create/manage filtered LDAP roles.
Can anyone let us know any pointers as to how to accomplish this or any ideas for the path to follow for this.
Any reply will be appreciated.

http://myidm.blogspot.com/2009/06/how-to-create-groups-in-ldap-or-active.html

LDAP Groups Performance

I am planning LDAP authentication for a portal and am looking at assign LDAP groups to portal roles to ease user administration because there will be a signifigant amount of users.
I've done this before with smaller amounts of users, but have heard concerns that with a large amount of user accounts, that authentication would take too long and would pose a problem. I don't know for sure if this is true and will be trying to test this out.
Would appreciate advice / experience / references if available.
Regards,
Tom

Hi Thomas,
I don't think this is a problem if directories are properly tuned.
Infact we connect to AD having 80k users and it works perfectly fine. But remember that your LDAP should be tuned properly and may be you can have indexes too.
Regards,
Piyush
PS: please mark useful answers.

How to verify user LDAP group membership

Hi,
we are attempting to determine if a user is a member of a specific LDAP group in our directory and if the user is a member it should return TRUE else FALSE (this is done by defining the LDAP attribute 'CN' (property) which returns a result 'CN=<UserName> or returns 'getting 0 entries'. The query we have is
(&(cn=<username>)(memberOf=CN=<groupname>,DC=domain,DC=com)).
Any pointers on how to do this ?
Thank you.

You could do a couple of things...
1) Install dsquery (add remote AD tools to your box) and run something like
dsquery group -u <user name>
Username would be their login name, yours is "swaupadh" for example. This would return a listing of all the groups they are in and you could regex through that output for the group you are looking for. Use either the Execute Powershell or Execute Windows Command activity here.
2) Use powershell functions and powershell capability to check for group membership, something like this:
function Get-GroupMembership($DN,$group){
$objEntry = [adsi]("LDAP://"+$DN)
$objEntry.memberOf | where { $_ -match $group}
//EXAMPLE CALL
Get-GroupMembership "Cn=kazun,dc=contoso,dc=com" "Backup Operators"
Then you can regex through the output for the "True" or "False" word and run with that.
Either should get you what you want.

Portal Roles added to the LDAP group is not showing up for users

Hello expert,
I have implemented SSO for Enterprise Portal and MS LDAP. It is working fine but when I assigned roles to the LDAP group instead of UME group, they are not taking effect when I refresh the browser. My service account that I set up in the keytab file is a read only account for the LDAP. Is there some permission issue that I have to do to be able to add Portal roles or groups to LDAP groups?

Hi,
By default the LDAP integration configuration file is readonly.
In this case, is not possible to modify data in LDAP.
You must to connect in read-write mode; and I think that, furthermore, you need to configure SSL between Portal and LDAP in order to use read-write mode.
regards,

Provision a user into an LDAP Group/Organisation

Is it possible to provision a user into a Role that is mapped to an LDAP Group/Organisation through Identity Manager? I've seen that you can add users directly into LDAP groups, but we would like to add users into groups where they already have an account in the Resource/Directory.
For example I want to allow an existing user;
uid=User1,ou=Users,o=mycompany
to access a resource protected by LDAP Group;
cn=AppGroup1,ou=Groups,o=mycompany
this group would be mapped to an Application or Business Role within Identity Manager.
Is this possible?

If I understand your problem correctly then there is no need for customizing the resource adapter java source code at all. You can "calculate" in which OU or O a user is created by customizing the resource's identity template. Just add a variable to the identity template DN and "calculate" that variable in either your form or map it to IGNORE_ATTR on the resource and then you could even set that value in a role.
Same for adding a user into a directory group. Map the respective groups attribute and create a role for that resource, then configure the role to set the group attribute or merge the values - as simple as that. Or did I misunderstand what you are trying to do?

Problem using a group which has a space in it's DN when using LDAP Group mappings in UCS 1.4

Hey,
We've been implementing LDAP authentication (Active Directory) using LDAP group mapping in UCS 1.4, and we've noticed that when using a group which has a DN with a space in it (such as "UCS Admins") it wouldn't authenticate the user with the appropriate role.
Using a DN without spaces (such as "UCSAdmins"), works just fine.
I should mention that having a base DN with spaces works just fine as well, it's just the group mappings that doesn't work.
I should also mention that Cisco's "Quick guide to configuring ldap for ucs 1.4" shows an example in which the group's DN doesn't include a space.
Is there a workaround available which can make it possible using a group which has a space in it's name?
Thanks,
Dor

Hey Roman,
Thanks for your prompt reply.
We've tried putting quotes using UCSM which is not possible at all - not for the entire entry nor for the part with spaces.
We've also tried using CLI ("scope security/ldap/ldap-group") where you have to put quotes if you use a DN with spaces, and it still doesn't work. Furthermore, we tried adding quotes only to the part with the spaces, i.e. - CN="UCS Admins",OU=TEST,DC=TEST. It adds the entry without an error, but shows like we would use "CN=UCS Admins,OU=TEST,DC=TEST". Anyway, it doesn't work either.
Thanks again,
Dor

Ldap groups

Similar Messages

Maybe you are looking for