LDAP integragtion for DMM using Digital Signage

We are in the process of investigating Active Directory via LDAP. I have seen documentation for the Video Portal but not much on the Digital Signage. First does anyone have any experience with this and its limitations or gotcha's?
The real question that has been asked of me from our security organization is regarding password change requirements. That is when the AD User ID password changes, does the DMM for that same User ID password change? If not is there any way to do this?
SLemaux

Hi.
You might find helpful information about these topics in the "Configuring Authentication Settings" section of the DMM 5.1 user guide on Cisco.com. Within that larger section, I think you'll find the synchronization references to be of particular interest.
Please see: http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_1/dmm/user/guide/admin.html#wp1088277
Regards,
Gary

Similar Messages

Digital Signage Yahoo! Group Launched

The Digital Signage Library has been launched October 25th,
2007 and is
hosted as a Yahoo! Group supporting email discussions and
file resources
related to software, hardware, and business criteria of
concern to those
involved in the design, development, and deployment Digital
Signage.
The group is intended to be of interest to --all platform--
software
developers, multimedia content developers, hardware
technicians, VARs,
vendors, manufacturers, channel distributors and of course
last but not
least our valued customers and people using digital signage
without whom
digital signage would have no audience.
Subscribe: [email protected]

Since you are deplying the 4400, and can therefore use HTML, one way would be to use a database to store the names of files and locations, and then with a simple interface, the user can select from the slides that they want to display, which they could have uploaded prior. Your dynamic page could then display the image.
-Michael

Best practices for exporting for digital signage?

I am exporting video clips to be displayed in a PC-based digital signage system. My video was shot in 1080i60, and I imported and edited the footage using HDV sequence settings. My final export size needs to be 1920 x 1080.
I have tried a couple of export strategies (export using Quicktime conversion) and just haven't been happy with how the video clips look on the PC system -- way too much interlacing. When I realized that the HDV codec is not cross platform, I started taking the additional step of opening and re-saving the .mov file in Quicktime. Now I'm fiddling around with Compressor, just to add more complications. I have tried so many different settings and codecs that I have completely lost my way! Can anyone recommend a workflow for this situation?
I am using FCP6 and Compressor 3 on an iMac OS 10.5.8.
Thanks for any help.

Terry Burton1 wrote:
I still see interlacing on the H.264 export that I don't see when I export the sequence as HDV. Of course, I can't get the HDV export to play on a PC.
I'm trying to read between all of the lines here...I'm going to assume there is a fundamental lack of understanding about what interlacing is and how you're going to remove it. The display either handles interlaced or progressive video files; one or the other. Let's assume it's progressive only. Since you shot interlaced, you must decide how you're going to remove the interlacing; you either throw away one filed or your combine them. If you combine them, you will see combed edges on anything that moves horizontally because every other line of pixels was captured 1/60th of a second later in time. If you throw away one field, you might as well have shot 720.
Where do you want o make this compromise?
bogiesan

Keynote for Digital Signage?

Hmm...? I thought that the new Keynote provided some means of pulling in RSS feeds. Was that a dream? Or perhaps wishful thinking with respect to the Web View feature?
Our goal is to use Keynote to provide Digital Signage support for an education technology conference we host at Arizona State University in the Spring (http://mec.asu.edu). We'd like to provide updates and information and such to attendees. Keynote would be nice, and the ability to pull in dynamic RSS info would be fantastic.
Any ideas on how this might be accomplished?
Thanks.
Message was edited by: dotguy

I have a plasma screen in our school lobby connected to a MacMini. I wanted to use Keynote to display weather station data kiosk style. One of the Keynote slides would include a web view of the weather station webpage (not exactly RSS, but a related problem that has been discussed widely online). Unfortunately, web views do not update once presentation mode is started. Here's the work around:
1. Use Automator to create an app that (1) stops current presentation & (2) immediately starts it again
2. Using CronniX, create a crontab entry that launches the App created above at a given interval
3. Play the presentation, and walk away.
My attempts at scripting a "stop/start" were unstable, but this has been running smoothly in our lobby for a week. The only drawback is the second-long "blip" followed by the show restarting at first slide, but it's a minimal distraction in this particular environment.

Workflow for exporting wmv for digital signage?

I am working with 1080i60 HD footage (HDV preset and sequence settings) in Final Cut Pro 6. I need to export sequences to be displayed on a Windows 7 machine running a digital signage system. The digital signage software prefers .wmv format.
I have purchased Flip4Mac WMV Studio Pro HD so I can export my HD footage and have a .wmv format video of comparable quality to feed through the digital signage software. I am baffled by all the settings and combinations -- CBR versus VBR; one pass versus two pass; various sizes and data rates. Does anyone have any recommendations? Also, does it make a difference if I export via Quicktime Conversion, or use Compressor?
Thanks.

Don't think it matters in terms of quality whether you export using quicktime conversion from within fcp or you use compressor, but compressor will allow you to customize and save your settings as a preset and/or a droplet which may make things easier. Theoretically you will get a more efficient encode using multiple pass variable bit rate encode as the output will be adjusted according to the complexity of the images. However, theory and practice are 2 different things and the only way to really see what your effect this parameters will have on your output is to do some tests. More than likely your displays will be progressive, so fooling with deinterlacing either in fcp or in compressor may be a good idea. Also, bitrate is going to effect how smoothly your wmv's play on the display system. Be sure and test this on your display system with what ever programs, etc will be running at the same time and hopefully on hardware that will match what will be in position for end use. You will probably make your clients a little crazy with questions and testing unless of course they've had some unfortunate experiences in the past, in which case they'll be appreciative right from the start.

Newbie: Flash for digital Signage Apps?

I'm a newbie in Adobe Flash development. I need to develop a
digital signage application, and was asking myself if Adobe Flash
would be a good candidate for this kind of application? Or are
there better options? I really want to develop the application and
not buying some existing app.
Thanks for all info.

You can Digital Sign a Flash Projector file using Jugglor.
Read this
http://www.flashjester.com/?section=faq&cPath=14_77
Hope this helps.
Regards
FlashJester Support Team
e. - [email protected]
w. - www.flashjester.com
"This has been one of the most impressive and thoroughly
pleasant
experiences of customer support I have ever come across -
astounding!"
Director - hedgeapple

Using Digital Personnel File for HCM Forms & Processes

Hi,
We would like to use Digital Personnel File for HCM Forms & Processes to save forms and attachments using record case management. For this to be done record case management needs to be customized. Can you provide the steps for record case management customization and integrating digital personnel files with HCM forms.
Regards,
Amit

http://help.sap.com/erp2005_ehp_03/helpdata/en/43/1d63953fce3566e10000000a11466f/frameset.htm
Refer here

How to create Users/Roles for ldap in weblogic without using admin console

Is it possible to create Users/Roles for ldap in weblogic without using admin console? if possible what are the files i need to modify in DefaultDomain?
or is there any ant script for creating USers/Roles?
Regards,
Raghu.
Edited by: user9942600 on Jul 2, 2009 1:00 AM
Edited by: user9942600 on Jul 2, 2009 1:58 AM

Hi..
You can use wlst or jmx to perform all security config etc.. same as if it were perfomred from the admin console..
.e.g. wlst create user
..after connecting to admin server
serverConfig()
cd("/SecurityConfiguration/your_domain_name/Realms/myrealm/AuthenticationProviders/DefaultAuthenticator")
cmo.createUser("userName","Password","UserDesc")
..for adding/configuring a role
cd("/SecurityConfiguration/your_domain_name/Realms/myrealm/RoleMappers/XACMLRoleMapper")
cmo.createRole('','roleName', 'userName')
...see the mbean docs for all the different attributes, operations etc..
..Mark.

Using external LDAP server for WL JNDI lookups

I'm trying to find out if it is possible to re-direct JNDI calls to the WL
server to an external LDAP server. I know you can install an external LDAP
server for security purposes, but I would like to use an external LDAP
server to handle all JNDI lookups (like for JNDI EJB name location, etc.).
Is this possible?

You typically need to use our JNDI store. We strongly recommend this for
performance reasons..
You can use the JNDI To LDAP bridge which is available from the sun web
site.
Michael Girdley
BEA Systems Inc
"Jack Archer" <[email protected]> wrote in message
news:[email protected]..
I'm trying to find out if it is possible to re-direct JNDI calls to the WL
server to an external LDAP server. I know you can install an external LDAP
server for security purposes, but I would like to use an external LDAP
server to handle all JNDI lookups (like for JNDI EJB name location, etc.).
Is this possible?

Use of Lotus LDAP server for WLP 7 - LDAP experts ?

Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
I connect my portal to the Domino LDAP, User and Groups are working
fine, but the membership of a user to a group is not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
"user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn="
Any help would be appreciate, because I just don't where to look for.
JP

"JP" <[email protected]> wrote in message news:[email protected]..
Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
I connect my portal to the Domino LDAP, User and Groups are working
fine, but the membership of a user to a group is not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
"user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn="
Any help would be appreciate, because I just don't where to look for.
Try setting the com.netscape.ldap.trace property.
\* When -D command line option is used, defining the property with
* no value will send the trace output to the standard error. If the
* value is defined, it is assumed to be the name of an output file.
* If the file name is prefixed with a '+' character, the file is
* opened in append mode.
This will create a ldap trace file of the requests that WLS is making on the
LDAP server. You can then see
where the filters are not returning the correct value for the group
membership.

Use of Lotus LDAP server for WLP 7 - LDAP experts required

Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
User and Groups are working fine, the membership of a user to a group is
not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn=
I know that this LDAP server supported, but id it could work at least
for some time, that would be great !
thanks for your help,
JP

"JP" <[email protected]> wrote in message news:[email protected]..
Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
I connect my portal to the Domino LDAP, User and Groups are working
fine, but the membership of a user to a group is not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
"user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn="
Any help would be appreciate, because I just don't where to look for.
Try setting the com.netscape.ldap.trace property.
\* When -D command line option is used, defining the property with
* no value will send the trace output to the standard error. If the
* value is defined, it is assumed to be the name of an output file.
* If the file name is prefixed with a '+' character, the file is
* opened in append mode.
This will create a ldap trace file of the requests that WLS is making on the
LDAP server. You can then see
where the filters are not returning the correct value for the group
membership.

Using CUCM as LDAP Server for Jabber Phone

Hi All,
I have CUCM 9.1 and Jabber 9.1 for android, I want to configure the Directory search with CUCM as LDAP server, when all the End User automatically added to directory search on the Jabber because we don't have any ldap server, but until now I always got Directory status Disconnected or Error.
Thing that I"ve done :
     1. Cofigure the LDAP server on phone configuration with CUCM ip address.
     2. FIll the Username and Password with CUCM Username and Password. (don't work)
     3. Create new Application User with AXL API Access that used to be the LDAP Username and password (don't work)
does anyone have done this?or the connection with another LDAP Server is mandatory for jabber application? becaus I know some 3rd party application that can done this.
please help me with this problem, any help or comment will be grateful
Regards,
Yopie

UDS does not work with Jabber for Android, you do need an LDAP
Requirements for Integration with Corporate Directory (Optional)
Use one of the following for Lightweight Directory Access Protocol (LDAP):
Microsoft Active Directory 2003
Microsoft Active Directory 2008
Open LDAP
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/jabber/Android/9_1/JABA_BK_J0D6CD65_00_jabber-android-release-notes-9-1-1.html
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Is it possible to create a web page to launch Reflection for UNIX and Digital program using Dreamweaver CS6?

I am planning to create a web page that could launch Reflection for UNIX and Digital program as part of my project in my working area.
Is this possible?
I am a beginner in using DW. I am still studying how to properly use Dreamweaver thinking that I could provide the requirement of my project.
Thank you for your comments.

This is a question for Attachmate, the maker of Reflection, not Adobe, the maker of Dreamweaver.
Dreamweaver is a tool, not a technology. It builds applications using HTML and Javascript that run on web servers using the HTTP protocol. So I think the question to as Attachmate is:
Can Reflection be launched from an apache webserver using HTML, PHP or Javascript?

License term for Digital Signage

What are the license terms for having a flash player with a digital signage screen? Is there a ceratain license for this?
Interested in the possibilites to view swf and flash codecs at in digtal signage solutation.

I'm not sure what a digital signage screen is, but here's a page that covers our licensing agreement.
http://www.adobe.com/products/players/flash-player-distribution.html

When can we create Digital Magazines for Personal use?

I would really like to create the same content you can create with the Adobe Digital Publishing Suite, but for personal use and not for publishing to an audience (i.e. personal family magazines). The problem is there is no mechanism for that, will you ever add that functionality, you give us the tools to create the content, but not a way to publish it without paying a huge price.

Hi, Winston
Are you use Apple TV across VLAN? or Are you use multiple Apple TV on same VLAN?
If you use Apple TV across VLAN. Could you advise me how?
PS. I don't find AppleTV unreliable also. It need enterprise devices for support their traffic.
Thank you
Chutawat

LDAP integragtion for DMM using Digital Signage

Similar Messages

Maybe you are looking for