LDAP network users/automount points doesn't work after power failure

Hi,
I have a lab of about a dozen Mac Mini clients that boot to their own local HDs and pull their user accounts from a MacPro tower running Mac OS X Server 10.4.9.
Last week there was a power outage. The power was restored a couple hours later, but the clients would not mount any of the automount points from the server and could not log into the network user accounts. The login window showed "No Network Accounts Available".
I went into Directory Access on each client, turned off LDAP and the line item for the open directory server, restarted the clients, then turned the LDAP on and enabled the open directory listing inside Directory Access. As soon as I turned LDAP back on, the mount points showed up, I logged out of the local user account and was able to log into the network user accounts.
It appeared to be fixed, but now the clients apparently lose their directory binding again after the client is restarted. I go back and toggle LDAP off, restart, toggle it back on and it all works again.
Any ideas on how I can get the setting to "stick" again? And why would the power outage cause this across the board for all the clients? Seems strange to me...

Hi David:
On the clients log in as administrator, launch Net Info Manager, authenticate, select Config and delete the mcx_cache. Restart the client, remove the configuration in Directory Access again as well as the entires in the Authentication and Contacts field. Save the change, redo the configuration and try again. Was the Server also involved in the power outage?
Hope this helps – Tony

Similar Messages

IMovie video project I made has no audio working after power failure

I have spent about a week stitching together family movies by ripping them to Apple tv format, then use a software program called MPEG streamclip to create a DV version which take about 24 gb a piece, I put 12 hours worth into iMovie which has taken a ton of space etc. So I created a project and am now about 1h 35 min in and this is getting small 3-5 clips of my son who is 7 months and my wife and myself b/c were going to England on Friday so I was created a nice movie for my new in laws and family I am meeting for the first time. So I had a saved file and iMovie was open and I had a power failure. I opened iMovie freaking out and then saw all the footage and the project still there so I was extremely thankful b/c of the 7 dvds I created due to space limitation once I imported I deleted the original (i have the original dvd but it takes about 6 hours to take from DVD to Apple TV format, then about 2 hours to export to DV and then another 1 hour to import into iMovie so each dvd took a full day for me due to work etc)
Anyway whats now happened is there is no audio on either the project or the original footage that has been imported, again about 12 hours of footage and a project thats 1 hr 35 mins. Whats strange is all other projects and imported video the sound and video works perfect. THis is the only one and of course its the most important one. ANY SUGGESTIONS WILL BE APPRECIATED.
If needed I will start over and do as much as I can but of course I am praying there is a simple solution.
Thanks.
newest iMovie, newest OSX etc if that helps

Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that did'nt work, first run the Disk Repair as shown in Apple doc.#106214 before the next step. Then, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours is the 10.4.10 Combo update ( PPC, not for Intel systems). Others reading, download the Combo that applies to your system.
If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good! Also, here is Apple doc.#88338 on getting FireWire to work.
Cheers!
DALE

Display doesn't work after power outage

The electricity was knocked out in my neighborhood for a few hours and when it was finally restored I found that my display no longer works. It is getting no power at all. None of the lights on the front of the display are working--it's totally dead.
No settings or connections were changed during the time when there was no electricity. So it's obviously a result of the power outage, right? I had it plugged into a surge protector (which I thought was supposed to be a safeguard against exactly this type of occurence) so I'm wondering if that has somehow saved me--only there's some secret Mac trick that needs to be done to get my display back to life.
Can anyone please help me? This economy is strangling me to death--I simply cannot afford to buy a new display at this point.

I just realized that I never actually asked my question (duu-uuuh):
Can anyone tell me if there is a way to figure out (without having to spend any money) if my problem is only with the power supply or if the entire display is just garbage at this point?
Or perhaps someone has experienced this situation, was able to resolve it and knows what I should do to make my display functional again?

Officejet Pro L7590 Scan feature does not work after power failure!

Hello guys,
I have an L7590 set up as a wired network printer through a netgear router. I am running Windows Xp. I installed the printer and everithing was working fine, but whenever there is a power outage the printer scanner does not see the computer. I am able to print from the computer but the twain feature is the only thing affected. I checked the router "Attached devices" and the printer is listed. The only way that I have being able to repair the problem is doing a complete uninstall and reinstalling the printer software again. Does anybody knows why this happpens or how to fix it? thanks a lot.

I am having a very similar problem. Everything will be working fine, and then one day the scan function will not work. It will print fine but it wont scan. It locks up my computer and then I have to reinstall. Now it has happened and I cant get it to work even after a reinstall. Printer works fine, but scanning wont work. I am able to ping the printer and nothing has changed on my computer. I am lost with this one. I hope someone is able to answer this.

[Solved] Network doesn't work after hibernate?

Hello! This is my first legit Linux install so excuse me if I'm a bit slow. I installed Arch last night and everything went smoothly. However, after I tested out hibernate on my machine, the network doesn't seem to work. Just prior to the hibernate, I installed Pidgin and Skype but they worked alright, so I think that the hibernate caused a problem on eth0.
I have an Asus P8Z68-V Pro motherboard with an Intel 82579V Gigabit Ethernet Controller that's using the e1000e driver. Running "dmesg | grep e1000e" says that it is up.
I'm not entirely clear here, but from reading, I think that I have several ways of connecting to the network, including network, dhcpcd, networkmanager, and wicd. I am using wicd so I did the following (or at least I think I am only using wicd):
#rc.d stop network
#rc.d stop dhcpcd
#rc.d stop networkmanager
Similarly, I put a ! in front of network in rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=()
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="Vicious"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng dbus !network netfs crond wicd)
Restarting eth0 through wicd-cli still did not work. I also tried resuscitating the network via instructions on the configure network page before trying to focus solely on wicd.
I found a few similar problems on the forums by searching "wicd hibernate" and tried several solutions but they did not work. Several problems seem to be that the network doesn't work after a suspend because I guess the stuff in RAM did not get saved? But people were able to restart the network by running "/usr/lib/wicd/autoconnect.py" and I wasn't able to get this to work. As a final effort, I added "resume" into mkinitcpio.conf and placed the machine into sleep again to see if it may magically reset something but of course this did not happen .
mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata resume filesystems usbinput"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
Not sure if my fstab.conf is useful but if this has something to do with settings getting "lost" in swap, here it is. Linux is on an SSD and HDD (sda and sdc) and Windows 7 is on a HDD (sdb).
fstab.conf:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /tmp tmpfs nodev,nosuid,noatime,size=2000M,mode=1777 0 0
/dev/sda1 / ext4 defaults,noatime,discard 0 1
/dev/sda2 /home ext4 defaults,noatime,discard 0 2
/dev/sdc1 /boot ext4 defaults 0 1
/dev/sdc2 /var ext4 defaults 0 0
/dev/sdc3 swap swap defaults 0 0
/dev/sdc4 /media/data ext4 defaults 0 0
shm /dev/shm tmpfs nodev,nosuid,size=10G 0 0
Is wicd causing these problems or did I configure something else improperly? Would appreciate any help to get eth0 up again!
Last edited by TheBigCow7 (2011-09-13 17:57:20)

Ok, I think I've made some progress! Hibernate definitely affects my network connection. Could this be a kernel 3.0 problem?
I noticed that ifconfig showed eth0 without an inet addr, just an inet6 addr for the longest time. e1000e seemed to be loading up ok. I'm not certain here, but I think that meant the dhcp settings didn't stick, or something along those lines.
Trying to use dhcpcd like the instructions here did not work. By some chance, one attempt did work and while it did, I downloaded and installed dhclient. After that one successful attempt, renewing the DHCP lease via dhcpcd did not work again.
Luckily though, I found that running "dhclient eth0" worked. My DHCP settings seemed to have somehow gotten messed up after my initial, problematic hibernate to the point where none would stick, even after a reboot. Manually typing in "dhclient eth0" would get eth0 working, so I decided to add it to the bottom of /etc/rc.local, like in the example on the networking page.
Now, eth0 works after a boot. However, after the daemons load up during the boot process, my computer takes a long time to get to the login prompt (this is relatively speaking, since I am on a SSD and the boot process used to be blazing fast before). I'm pretty sure it's because I added "dhclient eth0" to /etc/rc.local.
I should say that even with these changes, after a hibernate, my eth0 still does not work and if it weren't for the edit to /etc/rc.local, eth0's inet settings would still not stick after a reboot (that is to say, the hibernate does do something to my network settings).
Is this the correct/most efficient way to fix my DHCP problem? Can I fix my "eth0 after hibernate" issue? Also, can I make my DHCP settings boot up without changes to /etc/rc.local so that I can get a fast boot again (still not sure how it was able to work before without my edit)?

Automatic User Device Affinity doesn't work

Hi, the automatic User Device Affinity doesn't work in my environment and I don't know why! The audit policies are enabled by GPO and User Device Affinity is correctly configured in SCCM. Below are some screenshots including de log of User Device Affinity.
Anybody could help-me please?

An old post but,
This can happened when activating
advanced audit policy in one of the GPO. once it was activated, it gets override the regular audit policy with different event id's that SCCM don't recognize. in addition, the machine tattooed with those settings so removing the GPO wont revert the settings.
Check out this thread for more information and help:
http://social.technet.microsoft.com/Forums/en-US/f3a4b675-e955-4cd2-bba6-d51ea06dd362/user-affinity-not-working-properly?forum=configmanagergeneral
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

M3800 Developer Edition: wifi doesn't work after sleep

I have an M3800 Developer Edition (2015 model). Ubuntu is factory-installed 14.04, with hardware enablement stack installed. Recently (past 1-2 weeks) wifi doesn't work after sleep (lid closed or open doesn't matter), and only rebooting gets in back. Tried rmmod and modprobe with no success. Has anyone else seen this, and/or are you aware of any open bug(s) for this?
Relevant ouput:
lsmod when problem exists:
iwlmvm                217725 0
mac80211              652718 1 iwlmvm
iwlwifi               179412 1 iwlmvm
cfg80211              494362 3 iwlwifi,mac80211,iwlmvm
rfkill list when problem exists:
1: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
3: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
rmmod the above, then modprobe iwlwifi. Does not fix problem, only rebooting does:
May 4 08:23:14 jonathan-m3800 kernel: [69089.189614] cfg80211: Calling CRDA to update world regulatory domain
May 4 08:23:14 jonathan-m3800 kernel: [69089.192181] cfg80211: World regulatory domain updated:
May 4 08:23:14 jonathan-m3800 kernel: [69089.192184] cfg80211: DFS Master region: unset
May 4 08:23:14 jonathan-m3800 kernel: [69089.192185] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192187] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192188] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192189] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192190] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192191] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.204141] Intel(R) Wireless WiFi driver for Linux, in-tree:
May 4 08:23:14 jonathan-m3800 kernel: [69089.204143] Copyright(c) 2003- 2014 Intel Corporation
May 4 08:23:14 jonathan-m3800 kernel: [69089.204414] iwlwifi 0000:06:00.0: irq 48 for MSI/MSI-X
May 4 08:23:14 jonathan-m3800 kernel: [69089.204904] iwlwifi 0000:06:00.0: loaded firmware version 25.228.9.0 op_mode iwlmvm
May 4 08:23:14 jonathan-m3800 kernel: [69089.207709] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
May 4 08:23:14 jonathan-m3800 kernel: [69089.207790] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
May 4 08:23:14 jonathan-m3800 kernel: [69089.208150] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
May 4 08:23:14 jonathan-m3800 kernel: [69089.392408] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
May 4 08:23:14 jonathan-m3800 NetworkManager[901]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0)
May 4 08:23:14 jonathan-m3800 NetworkManager[901]:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): using nl80211 for WiFi device control
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): driver supports Access Point (AP) mode
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 4)
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> rfkill5: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/ieee80211/phy0/rfkill5) (driver iwlwifi)
May 4 08:23:16 jonathan-m3800 ModemManager[852]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0': not supported by any plugin
lspci:
06:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
After reboot:
lsmod |grep -i iwl:
iwlmvm                217725 0
mac80211              652718 1 iwlmvm
iwlwifi               179412 1 iwlmvm
cfg80211              494362 3 iwlwifi,mac80211,iwlmvm
rfkill list after reboot:
0: nfc0: NFC
        Soft blocked: no
        Hard blocked: no
1: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
2: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no

Wi-Fi still not reconnecting after sleep
http://forums.macrumors.com/showthread.php?t=1229591

TS4268 FaceTime doesn't work after upgrade to ISO 6.0.1, apple support team has sent an auto reply that doesn't help .... Any suggestion will be appreciated

FaceTime doesn't work after upgrade to ISO 6.0.1, apple support team has sent an auto reply that doesn't help .... Any suggestion will be appreciated

Hi AnaMusic,
It was working perfectly before the upgrade to ISO 6.0.1, but now I can't log in using my apple ID ... I have tried all suggestion from Tom but nothing does work. I keep getting the message "FaceTime can't log in, check your network" is nothing wrong with my network everything else works fine, I can log in into FaceTime using my IPad 2 and my apple ID.
I'm currently working in Korea, but I bought the IPad in Australia,
Regards,
Namur

IMac - Display doesn´t work after restart

My iMac 21 Display doesn´t work after restart. If I turn it off and 1 hour later I want use it again the iMac shows the white screen with the mac logo and then the display goes off. I connected an external display to check if the iMac was ON and with the external display I can login and do everything but the iMac Display doesn´t work .
If I turn it off and wait 3 or 4 hours and then turn it back on the display works OK.
This is very strange behavior I have spent hours and hours trying to fine the solution or a similar issue but nothing so I am looking help here at apple.com
BTW When I bougth the iMac 21 there were some spots over the display so the display was replaced by the provider. The warranty has expired by now.

To tell you the truth, I don't know if they have to repalce the LCD panel or what they do for a bad backlight. In this reality of block or assembly replacement it probably involves repalcing the panel and not the backlight component. Don't know what it would cost. You'd have to ask that of a service center.

Touch ID doesn't work after ios 7.1.1 update

Touch id doesn't work after ios 7.1.1 update..
Why????

After IOS update, you first have to use passcode.
Passcode is needed when
After restarting your iPhone 5s
When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
To enter the Touch ID & Passcode setting

Mail server doesn't work after upgrading from SL to ML

My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$

if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

Why tethering with USB cable doesn't work after IOS6.0 update?

why tethering with USB cable doesn't work after IOS 6.0 update?

Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

My cable doesn't work after two months I bought my iphone 6. Whether could I get a new one from apple free charge?

my cable doesn't work after two months I bought my iphone 6. Whether could I get a new one from apple free charge?

It's covered under the same warranty as the phone. So long as it's not physically damaged, they should replace it for you.

Fit the window with mouse doesn't work after new update 10.9.2

Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

Doesn't anyone having this issue?

Condition doesn't work after transport to QAS system.

Hi all:
the condition doesn't work after the workflow transported to QAS system. the workflow designed has a constraint that only the creation of the document of Type M4 can trigger the workflow, but creation of Type M5 document can also trigger the workflow, could you please tell me the possible reason?
Thank you very much

Hi,
Once Try checking as pavan suggested whether the Customizing requested is transported.
To Maintain Workflow start conditions you can also maintain through SWB_COND and ensure its transported.
Regards
Narin

LDAP network users/automount points doesn't work after power failure

Similar Messages

Maybe you are looking for