LDAP-Server configuration and using

Hi,
can anyone tel me how it function with the LDAP-Server in the Adobe LiveCycle Es?
What i have to do? and how can i get user data from the logged user via LDAP?
Thank

LiveCycle ES has an administrative console you can get at http://localhost:8080/adminui. You can log in with administrator/password.
Under the Settings section, you can go to User Management and then Domain Management.
In there you can define a new Enteprise Domain and create a new Authorization and Directory for that new domain.
In the Authorization, you can select LDAP. Under the Directory, you'll be taken through a wizard that will help you configure the LDAP connection to get the list of users and groups.
Then go back to Domain Management and select "Synch Now". You can set that synchronization to occur periodically.
Once you can connect to the LDAP server properly and get the list of users, you should be able to log to the different interfaces using users from the LDAP system.
You might need to give them LiveCyle roles to access some of the interfaces like adminui, workspace, etc. You can add roles under Settings/User Mangement/Role Management
Jasmin

Similar Messages

How to configure and use StartTLS on Windows AD server (2008 R2 or 2012) ?

I would like to use port 389 with secure ldap using StartTLS, i.e ldap over TLS. I could not find documentation to configure and use ldap over tls using port 389 with the implementation of StartTLS command. Though I could find documentation on secure ldap
on port 636. Please help.

Hello,
see about self-signed certificates in
http://support.microsoft.com/kb/321051/en-us and how to enable them in AD.
Please see if steps in
https://kb.meraki.com/knowledge_base/certificate-requirements-for-tls will help you.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

How to configure and use jboss cache

Hi,
I need to use Jboss Cache in our application,
But i don't know anything about Jboss Cache...
can u tell me requirements and configuration for this?
and i am using jboss application server 3.2.3..
and apache-ant-1.7.1, jdk1.6.0_06, jbosscache 2.2.0
can u tell me how to configure and use jboss cache?
Thanks & Regards
Thilkumar

Go to the JBoss web site and read up on the documentation there.
And if you still have any questions you'll probably get better answers at the JBoss forums than in these forums.
- Roy

How to Configure and Use Oracle's JMS Connector with Tibco EMS

Jeff,
I am getting the below exception while try to do the deployment of the sample provided on 'How to Configure and Use Oracle's JMS Connector with Tibco Enterprise for JMS'
While deployment not able to get the 'TibcoJMSReference',
As I understand in the 'orion-application.xml for the below, unable to get the instance. Could you adivce how I can enable the trace more?
<resource-provider class="com.evermind.server.deployment.ContextScanningResourceProvider" name="TibcoJMSReference">
could you help to resolve the issue?
Error
Operation failed with error: No resource named 'TibcoJMSReference/TibcoXACF'found

Hi,
I'm also looking for the same 'Configure and Use Oracle's JMS Connector with Tibco JMS to consume message'. If you have already implemented and working fine, please let me know the steps and some documents.

How to configure and use KM

Hi Experts,
Iam new to KM.We need to configure KM for our client. When I surfed internet ,I can see only explanation on KM but I need steps for configuration and details about how well KM can be used. Share me the documents,procedures and steps to configure and use KM.
Currently Iam working on KM Navigation Iview and I have following doubts
1) Is there a way to allot some space in KM automatically when users are newly created.Under Userhome link of KM , for the newly created users a seperate link is automatically created .Do I have to assign that to user for using KM.
2)Can we restrict space for each user in KM.
3)How to configure and customize context menu in KM navigation iview.
Regards
Karthiheyan Murugesan

Hi Karthiheyan,
Still I have further requirement like How to transfer all datas of KM from one server to a new server for all the users (also how to create back up?
Through KM Tranport you can transport the contents from server to server
For KM content transport go through the below help document
http://help.sap.com/saphelp_nw70/helpdata/en/46/7649426fd759dbe10000000a1553f6/frameset.htm
How to customize the various options like view , actions ,settings present under Details option?
For the context menu of folder New->Forms->...How to restrict this forms visibility?
        This can be done using the Layout set,there you will be having collection render,resource render,details setting through which the options can be customized and the customized layout should be used in field layout set in the KM Navigation Iview.For further understanding go through the below document.
http://help.sap.com/saphelp_nw70/helpdata/en/30/504a1e7f0e354bbf9adedf1a29f3ec/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/504e31fc-f46f-2910-98b4-dd94478c22f8?QuickLink=index&overridelayout=true
Naga

Configure and use push notifications for IOS - Xamarin

Is it possible to configure and use push notifications in SharePoint 2013 apps for iPhone Xamarin.
Recently I started creating a Xamarin application that supports both Android and IPhone application. So my doubt here is, Is it possible to create a solution in SharePoint Server for sending
push notifications and a client side iOS - Xamarin application for receiving the notifications.
If Possible how I can create the same. Please help. If it is not possible anyone please suggest me a workaround to implement the same.

This is not a permanent fix but through this you can easily use the apps
Go to Settings> General> Accessibility> Guided Access
Now tap the Guided Access and turn it on.
Now go straight to the app which is having this problem. After opening the app press the home button 3 times to activate the Guided Access mode.
After activating and choosing a password you'll see that there is no "connect to iTunes to use push notifications in ios 8.1" pop up any more.
If you want to leave the app press the home button three times again.
Thanks
It works 100%

How to configure and use labview using java

I want to configure and use labview in my application using java, please help me out with a solution how i can configure it (like providing input to labview and getting output from labview in java ).
Thanks,
ATF

Did you try a search?
Or: How Do I Integrate Java with National Instruments Software Products?

Configurations and uses of productionresource/tool..?

Hii friends.
Please let me know the uses of productionresource/tool and its configurations and uses. i heard that most of the manufacturing industries use this senarious.
Please help me
Regards,
Sirish

Dear,
Production Resource/Tool(PRT) is a moveable operating resource used in production
You can assign production resources and tools to the task lists and production orders for which they are required.
Production resources/tools that are used for testing during production can be assigned to the corresponding inspection characteristic in the inspection plan.
Purpose
Unlike machines and fixed assets, production resources and tools (PRTs) are movable (not stationary) operating resources that are required to perform an activity and can be used repeatedly. For example, PRTs include documents, engineering drawings, jigs and fixtures, and measurement instruments.
You can assign production resources/tools to internal and external activities. You use the assignment to determine:
The quantity
The operating time
The dates
of the PRTs required to carry out the activity.
There are several categories of production resources and tools in the R/3 System. The category determines the characteristics and business functions that a PRT can have.
You can create production resources/tools with the following categories:
A material PRT has its own material master record with the view "PRT". A material PRT can be procured, that is, it can either be purchased or produced. You can also keep it in stock and track both its value and quantity.
A miscellaneous PRT has its own PRT master record and can neither be procured nor kept in stock.
A document PRT has its own document info record, (for example engineering drawings or NC programs). You can manage these PRTs using the R/3 Document Management System.
In the Project System you can assign documents directly to activities. Consequently you will not use this type of PRT very often.
An equipment PRT has its own equipment master record and has the full equipment functionality. This category is particularly useful for those production resources or tools which you must maintain yourself or which must be serviced at regular intervals. With the equipment category, you can furnish proof of service or usage values for the production resource/tool.
PRT as a material - MM01
PRT Master - CF01
Document - CV01N
Equipment - IE01
PRT availability check - OPJK
PRT control keys - IMG>Production>Basic data>PRT>define control keys
Also refer the links below...
http://help.sap.com/saphelp_47x200/helpdata/en/89/a42719461e11d182b50000e829fbfe/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/bf/5ffd0e6d4311d1ad5e0000e8a6353a/frameset.htm
Hope this helps...
Regards
R.Brahmankar

Tiny doc error? Configuring+and+Using+Coherence+Extend

This page:
http://coherence.oracle.com/display/COH35UG/Configuring+and+Using+Coherence+Extend
mentions the string "dist-extend-direct" only once. Is that intended just as an example of something that would match against
<cache-name>dist-*</cache-name>
or was that an error? It seems like it should be mentioned explicitly in the XML config file examples on that page.
-Andrew

Hi Andrew,
It is the former. It is intended as an example of a cache name that would match the "<cache-name>dist-*</cache-name>" cache mapping in the cluster cache config.
Patrick

Content Server Configuration to use FileSystem as Reposiroty

Hi,
We want to enable Content Server on our system. But instead of using the underlying database as the storage / repository we would like to use and external filesystem as a storage / repository. Also accessing the data thus stored would be using the HTTP service???
Is there a step-by-step guide explaining how to do the configuration and enabling content server using external file system as the storage.
Can anyone help
Thanks
Makarand

perhaps this will help you:
/thread/48852 [original link is broken]

DNS server configuration and behaivour

Hi all,
I'm looking for detail explanations which can explain how Mac OS X 10.6 *DNS client* works and may be configured.
According to http://discussions.apple.com/thread.jspa?threadID=2227251 nothing is not guaranteed like order and failover.
According to http://support.apple.com/kb/HT4030 failover will take affect when DNS server returns with SERV_FAIL (0x2) error code. What about NXDOMAIN (0x3) error code (which is more interesting scenario)?
What I'm looking for DNS client?
I'm looking for several DNS servers configuration which allow to split DNS domains for several areas. This, for example, may be very useful for VPN connections when VPN DNS server will resolve internal resource and another server (configured before VPN tunnel established) will resolve external resources.
Is there any possible configuration to achieve this requirement for Mac OS?
Thanks in advance,
Oleg.

Thanks Felix for quick response.
In your scenario:
1. You configured to different DNS servers and probably only one of them replied to DNS queries. And this is OK.
2. When non valid IP configured means that DNS server will not reply to DNS query and than failover will query the second DNS server in the list. And this is also OK.
I'm looking 2 different DNS servers configuration when one of them will reply to different domains. For example:
First server will reply to *.mycompany.com.
The second one will reply to any query except mycompany.com domain(since it is not published).
Thanks again,
Oleg.

Help: which LDAP server should I use with weblogic 5.1

Hi:
I try to use LDAP for user profile management. I am free to use any LDAP
server as long as it is easy to work with weblogic 5.1 or 6.0.
Any suggestions?
Thank you.
li

This is what I did for my DS settings
1. select Oracle JDBC Driver
2. set Classes12.jar in Websphre classpath - (Oracle thin driver)
3. create DS with option User defined JDBC provider
means I have added Thin driver provided by Oracle , instead of deprecated Thin driver from IBM.

InDesign Server configuration and fonts

When you start multiple instances of InDesign Servers you specify the different configuration names.
Is it possible that 2 instances of InDesign Servers running on the same server with different configuration names have different fonts installed?
I.e. can I install some fonts of configuration level, not for the entire server?

There is no document titled "InDesign Server Installation and Configuration Guide". This was an error in the CS2 version of Introduction to InDesign Server.
You'll find the CS2 version of Introduction to InDesign Server in the InDesign Server CS2 ESD (the server download bundle). Even better you'll find the CS3 version in the InDesign CS3 Server SDK. Available at the following URL:
http://www.adobe.com/devnet/indesign/
The information about Java/CORBA is specific to CS3, but the information about scripting and SOAP applies to CS2.
Let me know if that helps, or you still need something else.
Regards,
Heath Lynn
Developer Technologies
Adobe Systems

How to Configure and Use Oracle's JMS Connector with Tibco Enterprise

Following the advice here: http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/how-to-connect-to-tibco/doc/how-to-connect-to-tibco.html
I believe I need to provide a username and password for the Tibco JMS provider, and would like to know the correct way. Is this right, in orion-application.xml
    <resource-provider class="com.evermind.server.deployment.ContextScanningResourceProvider" name="TibcoJMSReference">
        <property
            name="java.naming.factory.initial"
            value="com.tibco.tibjms.naming.TibjmsInitialContextFactory">
        </property>
        <property
            name="java.naming.provider.url"
            value="tibjmsnaming://jleinawe-sun:7222">
        </property>
<property name="java.naming.security.principal" value="user" />
<property name="java.naming.security.credentials" value="password" />
    </resource-provider>

This is kind of up to Tibco...
When you add properties to the resource-provider element, you are just adding entries to a Map which gets passed to the initial context factory, which in this case is implemented by Tibco (TibjmsInitialContextFactory), so you may want to check their docs.
It's possible they only use that for username/password for JNDI access purposes and not for JMS. If so, you can explicitly set username/password for outbound connections in the oc4j-ra.xml file, and using ResUser/ResPassword in the MDB's activation-spec to set username/password for inbound connections.
-Jeff

Client can not connect to Server installed window server 2008 and using 8.8

HI all!
I have a problem when Client log in to server that installed window server 2008.It can not connect to this server even when restart and key in IP or Server name,...
I try disable Firewall of window 2008 in server machine and client can connect to server. But when i disable firewall, it's mean i can not use Remote desktop or terminal service..
Now, how i can do in order to solve this problem.
Thanks!

Hi,
Take a look at the admin guide (Page 75, 119, 159):
[http://service.sap.com/~sapidb/011000358700000150922010E.zip]
If you installed a firewall on the license service computer, make sure that the firewall is not set to port 30000; otherwise, the license service cannot work.
If you are using Port X, make sure that you open Port X and Port (X+1) in the firewall. For example, if you are using port 10000, make sure to also open port 10001.
The default communication port is 1143.
The default port of the SAP Business One license server is 30000 for license communication and 30001 for the license naming service

LDAP-Server configuration and using

Similar Messages

Maybe you are looking for