LDAP server support for NetWeaver
I would like to know what LDAP Directory servers are officially supported by Netweaver versions. I have been scouring the web and can not find any document where it is written which product is officially support. Some places I read about Novell, but nothing concrete on the offical support .
Does anyone know the answer and where I can find more info on this.
Thanks
Hi Frajib,
I don't think I've seen a list for netweaver in general. I do know for the Portal application on Web AS 6.40 you have the following LDAP options.
MS ADS
SUN ONE
NOVELL LDAP Server
Siemens LDAP Server
Hope this helps.
John
Similar Messages
-
Ldap server authentication for EAI domain
Hi everybody,
I have configured a new realm fot the security of the created EAI Domain and
made it default. In this realm, the authentication provider is the iPlanet LDAP
Server.
Now the booting is fine but then when I am starting the Weblogic Studio, it is
not getting authenticated and I keep getting the error :
<Nov 26, 2002 10:00:27 AM IST> <Error> <B2B> <000000> <<WLI-Security> ERROR: No
realm found.>
<Nov 26, 2002 10:00:27 AM IST> <Error> <B2B> <000000> <<WLI-Security> ERROR: Ini
tialization of WLI Authentication Service failed with exception java.lang.Runtim
eException: ERROR: No realm found..>
The error page obtained at studio is what is given as attachment.
Anybody having any info regarding the same - pl. do pass on.
Thanks and regards,
Ritwik
[wli-error.doc]Hello Ritwik,
it should for sure, but with this release WLI depends on the
compatibility realm.
Christian Plenagl
Developer Relations Engineer
BEA Support
"Ritwik" <[email protected]> wrote:
>
Conceptually if I create respective groups (similar to the groups and
users of
the compatability realm) in the ldap server and do the authentication
from there
- it should work - shouldn't it???
Any pointer !!!
Regds,
Ritwik
"Christian Plenagl" <[email protected]> wrote:
Hi Ritwik,
you can read in the WLI documentation, that WLI7 currently supportsthe
compatibility
realm only.
Please have a look at:
http://e-docs.bea.com/wli/docs70/deploy/secure.htm#1365621
Christian Plenagl
Developer Relations Engineer
BEA Support
"Ritwik" <[email protected]> wrote:
Hi everybody,
I have configured a new realm fot the security of the created EAI
Domain
and
made it default. In this realm, the authentication provider is theiPlanet
LDAP
Server.
Now the booting is fine but then when I am starting the Weblogic Studio,
it is
not getting authenticated and I keep getting the error :
<Nov 26, 2002 10:00:27 AM IST> <Error> <B2B> <000000> <<WLI-Security>
ERROR: No
realm found.>
<Nov 26, 2002 10:00:27 AM IST> <Error> <B2B> <000000> <<WLI-Security>
ERROR: Ini
tialization of WLI Authentication Service failed with exception java.lang.Runtim
eException: ERROR: No realm found..>
The error page obtained at studio is what is given as attachment.
Anybody having any info regarding the same - pl. do pass on.
Thanks and regards,
Ritwik -
IE7 Support for Netweaver Rendering Technologies?
Hello all,
We're just starting to test IE7 and right off have run into issues. In the posts I've seen people have been referring similar questions to the Product Availability Matrix which doesn't appear to address IE7 for NetWeaver Rendering Technologies. What's the latest on this. Does anyone have a hard answer from SAP, dates if not currently supported. Just looking to accelerate our understanding of this.
Thanks,
Doug SteckelHi Doug,
Please see SAP Note 991449.
Best Regards,
Matt -
Format Of LDAP Server List for Netmail
Could anyone please explain what the format for using an ldap server for address lookups in Netmail. ie:
servername:port/searchbase or ldap://servername:port/searchbase. I have tried a few but can't seem to get it to work. Everytime I try to add a server to this list, the Java Netmail will not allow me compose a message.. anyone have any ideas..Chris -
Each entry is a comma separated list of name/value pairs in the following format: name="value". Quotation marks are not allowed in any value. The valid names and corresponding preference are:
name the user-friendly name for the server; this is what the user sees in the NetMail Address Search tab.
server the host name of the LDAP server. If a port is needed, use host:port.
base the search base expression, e.g., ou=People
searchin the list of attributes to search in, e.g., cn,givenname
result the attribute to use as the result, defaults to mail
filter additional search filters to be applied
referral whether or not to follow referrals, true or false
Only the server value is required, all others are filled in with defaults if necessary. A typical entry might be:
name="Company Address Book", server="ourldap.xyz.com", base="dc=xyz,dc=com"
Stephen -
Microsoft Project Server Support for SQL Server 2014
Does anyone know the timeline for Microsoft Project Server to support deployment on SQL Server 2014? Also, has anyone tried this yet as an unsupported deployment, and if so, have they found any issues?
"SQL Server 2014 is not yet supported for Project Server 2013", as per the article Hardware
and software requirements for Project Server 2013: https://technet.microsoft.com/en-us/library/ee683978(v=office.15).aspx updated as on Dec
09, 2014.
Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading
the thread. -
Hello,
I use iPlanet Web Server Enterprise Edition 4.1 Service Pack 11, for my JSP pages i wanna use EJB does this server support EJB.
ThanxHello,
I use iPlanet Web Server Enterprise Edition 4.1
Service Pack 11, for my JSP pages i wanna use EJB
does this server support EJB.
ThanxAFAIK, it doesn't... you could use a newer version. -
Does InDesign CS3 Server fully support the XML standards outlined by ECMA in 'Standard ECMA-357 ECMAScript for XML (E4X) Specification'?
http://www.ecma-international.org/publications/standards/Ecma-357.htmThanks Michael, for your prompt reply.
I can see that some of the XML library/functions are available in the ExtendScript Editor - but I just wanted to make sure that I'm not missing something.
Thanks again,
Carl -
Oracle Weblogic 9.2.3 server support for SAML 1.1 'wildcard attributes'
To support Web SSO using SAML on Oracle Weblogic 9.2.3 server - I need to parse SAML 1.1 'wildcard attributes' in the SAML 1.1 Asserter schema; https://www.oasis-open.org/committees/download.php/3408/oasis-sstc-saml-schema-assertion-1.1.xsd. The Oracle Weblogic 9.2.3 server provides an interface; weblogic.security.providers.saml.SAMLIdentityAssertionNameMapper - for parsing the information in the SAML token provided by an external partner, but this interface only deals with nameid and groups and not attributes in the AttributeStatement of the SAML token. In weblogic 10 a new interface; com.bea.security.saml2.providers.SAML2IdentityAsserterAttributeMapper - is provided, which solves this problem.
My question is, how can I get access to the attributes in the AttributeStatement in the SAML 1.1 token on an Oracle Weblogic 9.2.3 server ?
Or
Is the weblogic.security.providers.saml.SAMLIdentityAssertionAttributeMapper available in weblogic 9.2.3 ?To support Web SSO using SAML on Oracle Weblogic 9.2.3 server - I need to parse SAML 1.1 'wildcard attributes' in the SAML 1.1 Asserter schema; https://www.oasis-open.org/committees/download.php/3408/oasis-sstc-saml-schema-assertion-1.1.xsd. The Oracle Weblogic 9.2.3 server provides an interface; weblogic.security.providers.saml.SAMLIdentityAssertionNameMapper - for parsing the information in the SAML token provided by an external partner, but this interface only deals with nameid and groups and not attributes in the AttributeStatement of the SAML token. In weblogic 10 a new interface; com.bea.security.saml2.providers.SAML2IdentityAsserterAttributeMapper - is provided, which solves this problem.
My question is, how can I get access to the attributes in the AttributeStatement in the SAML 1.1 token on an Oracle Weblogic 9.2.3 server ?
Or
Is the weblogic.security.providers.saml.SAMLIdentityAssertionAttributeMapper available in weblogic 9.2.3 ? -
ACS Server - Support for three separate company networks
I looking into purchasing a ACS 3.3 server to support 3 networks in my organization. Here are my requirements:
- One ACS server running TACACS and RADIUS supporting three networks
- each network has a common group of administrators that require various level of access
- some adminstrators require access to all three networks, some one, some two
How can I configure each group of users to only have access to their respective networks. What attributes do I use to destinguish the networks for each group of users.
I think ACS can do this from the reading I have done but need assurance.
ThanksYou could see the documenation for the configuation examples here : " target="_blank">www.cisco.com/techsupport/--------> guest---------> product support ----------> Security and Vpns -------------> search for ACS 3.3, check for release notes as well as for configuration examples. You can select view all documents.
Also, " target="_blank">www.cisco.com/techsupport-----> Select ACS from the drop down menu under Security. -
Mac os x server support for iWeb
Hi, I was wondering if anyone knows if there is any way to set up a Mac OS X server (10.5) to support iWeb created websites such that comments could be enabled much like they work with MobileMe?
Thanks,
-zAlways with the RTFM...
Anyway, like I said, I'm not running Snow Leopard Server so I don't know if this has already been implemented and quick web searches for such do not bring anything up but it doesn't hurt to ask. If it hasn't I'd like to not only request some features in future versions but ALSO to inquire if there are others in the iWeb "Community" who would also like such features. The feature request link you provided is a black hole and doesn't really provide much feedback. Finally, someone might have a solution for including comment in iWeb created websites that I haven't already encountered or figured out on my own.
Message was edited by: zenasprime -
Sun Java System Web Server support for Red Hat EL 5
Does anyone have any information when the Sun Java System Web Server might be supported on Red Hat Enterprise Linux 5 Server?
ThanksCertification of RHEL5 will likely happen with one of the upcoming Update releases.
There is, as far as I know, no reason why Web Server won't run on RHEL5 today though (I use it on Fedora Core 7 without ill effect, and the RHEL trail the Fedora releases a bit in technology versions). -
Belkin Print Server support for Epson Stylus photo R200
I have just installed a Belkin Wirless G adsl modem router, which works very well and I very satisfied with it. Along with this I purchased a Belkin Print server F1UP0001uk to drive my Epson stylus photo R200. While I can see my Print server and ping it satisfactoraly and it can see my printer. I can't get it to print.
Belkin tell me that I have to change the CUPS port from 515 to 9100 for print server port1 or 9101 for port2 on each machine I want to connect from.
How do I do this?
G4 Mac OS X (10.3.9)What they are describing is the HP Jetdirect protocol on OS X, called raw/port 9100 printing on Windows. To use port 9100, in Printer Setup, select IP printer > HP JetDirect and it will work (9100 is the default port number). To use port 9101 requires the advanced method. In Printer Setup, after you click ADD, hold down the option key while clicking More Printers (you may need to pause a bit before the More Printers, because OS X is searching for Bonjour printers). At the bottom of the new menu, select Advanced, then select Appsocket/HP Jetdirect. Name it. Fill in the URI like:
socket://[IPofserver]:9101 -
NEED FAST AND BEST JAVAEE 5 SERVER SUPPORT FOR NETBEANS 5.5
I am using j2ee technology for open source development since j2ee 1.4 sdk. The Sun Application Server 8.1 and 8.2 were bit fine to start with netbeans. But Glassfish seem to be too slow to start and deploy. Can anyone tell me the fastest and best performance app server to use with netbeans 5.5.
The computer specs are
PIII 500 MHz
512 100/333 MHz SDRAMWhat difference does it make how quick the app server takes to start and deploy?? That's about the most arbitrary criteria for choosing an app. server I've ever heard. Might as well choose based on the colour of the logo!
Seriously, use whichever one you think you're most likely to encounter. Looking at the spec. of your machine, no app. server is going to run particularly fast. Look into getting a faster machine, or at least a second machine of similar specs to run the server on. Poor thing must be exhausted :-) -
Tn3270 server support for IBM mainframe
Does the tn3270 server (with CIP/CPA on 7200) router can be attached to a IBM mainframe running VSE/ESA operatinf system ?
Sure, this works fine. The CPA is what is used in the 7200, and is functionally identical to the CIP.
-
Use of Lotus LDAP server for WLP 7 - LDAP experts required
Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
User and Groups are working fine, the membership of a user to a group is
not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn=
I know that this LDAP server supported, but id it could work at least
for some time, that would be great !
thanks for your help,
JP"JP" <[email protected]> wrote in message news:[email protected]..
Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
I connect my portal to the Domino LDAP, User and Groups are working
fine, but the membership of a user to a group is not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
"user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn="
Any help would be appreciate, because I just don't where to look for.
Try setting the com.netscape.ldap.trace property.
\* When -D command line option is used, defining the property with
* no value will send the trace output to the standard error. If the
* value is defined, it is assumed to be the name of an output file.
* If the file name is prefixed with a '+' character, the file is
* opened in append mode.
This will create a ldap trace file of the requests that WLS is making on the
LDAP server. You can then see
where the filters are not returning the correct value for the group
membership.
Maybe you are looking for
-
The wi-fi option on my iPod is GREY and says NO WIFI
Recently my iPod touch (software version 4.2.1) is no longer allowing me to gain access to my Wi-Fi. Instead, the option to select my Wi-Fi, is grey and says NO WI-FI. I have tired to reset the network settings and even restored to it its original fa
-
IPod shows up on desk top but not in iTunes
I have a 3rd gen. iPod it shows up on my desktop but my iTunes no longer recognizes it, i've try reinstalling iTunes, resting, restoring, and updating my iPod but all is for not, Suggestions?
-
Hooking up my Ipod to my New Calibur!
Ok so I just bought a new Dodge Calibur, it has an AUX plug in it for my Iopd, but I didn't get anything to plug the Ipod into it, nothing, so now I'm stuck with an Ipod and new car, but I can't listen to my Ipod from my car, I can't find anywhere th
-
Artwork sometimes doesn't display properly in iTunes 10
I'm seeing that in iTunes 10 when you choose 'Album by Artist' mode and display Album artwork as 'Large' it will not display at all if the there are not enough songs to create a high enough area for the artwork to fit. It seems to be when you have 6
-
How to upgrade from OS X 10.5.8 to Mountain Lion
I am running OS X 10.5.8 on my MacBook Pro and want to upgrade softwre. Do I need to install Snow Leopard and Lion, then Mountain Lion? I want to be able to get Mountain Lion