LDAP time limit exceeded.IMTA database will not be created

ims5.1
run ./imsimta dirsync -F ,get the message
LDAP time limit exceeded.IMTA database will not be created . and i already set set timelimit to -1 ,
set lookthroughlimit to -1
set sizelimit to -1
,but why the error is continue?

You are using Dirsync. The answer is to stop using dirsync.
From version 6.0, dirsync is no longer part of the product.
From version 5.2, Direct LDAP is the preferred method.
No user that is currently using 5.2 or later should ever use dirsync. dirsync has bugs that will never be fixed.
Direct LDAP is a much better way to go. The instructions for setting this up are in Appendix b of the Administration Guide. Please do follow those.
If you insist on using dirsync ( a very bad idea ), you must set the timelimit to -1 (unlimited)

Similar Messages

  • Program terminated: Time limit exceeded, ABAP performance, max_wprun_time

    Hi,
    I am running an ABAP program, and I get the following short dump:
    Time limit exceeded. The program has exceeded the maximum permitted runtime and has therefore been terminated. After a certain time, the program terminates to free the work processfor other users who are waiting. This is to stop work processes being blocked for too long by
    - Endless loops (DO, WHILE, ...),
    - Database acceses with large result sets,
    - Database accesses without an apporpriate index (full table scan)
    - database accesses producing an excessively large result set,
    The maximum runtime of a program is set by the profile parameter "rdisp/max_wprun_time". The current setting is 10000 seconds. After this, the system gives the program a second chance. During the first half (>= 10000 seconds), a call that is blocking the work process (such as a long-running SQLstatement) can occur. While the statement is being processed, the database layer will not allow it to be interrupted. However, to stop the program terminating immediately after the statement has been successfully processed, the system gives it another 10000 seconds. Hence the maximum runtime of a program is at least twice the value of the system profile parameter "rdisp/max_wprun_time".
    Last error logged in SAP kernel
    Component............ "NI (network interface)"
    Place................ "SAP-Dispatcher ok1a11cs_P06_00 on host ok1a11e0"
    Version.............. 34
    Error code........... "-6"
    Error text........... "connection to partner broken"
    Description.......... "NiPRead"
    System call.......... "recv"
    Module............... "niuxi.c"
    Line................. 1186
    Long-running programs should be started as background jobs. If this is not possible, you can increase the value of the system profile parameter "rdisp/max_wprun_time".
    Program cannot be started as a background job. We have now identified two options to solve the problem:
    - Increase the value of the system profile parameter "rdisp/max_wprun_time"
    - Improve the performance of the following SELECT statement in the program:
    SELECT ps_psp_pnr ebeln ebelp zekkn sakto FROM ekkn
    INTO CORRESPONDING FIELDS OF TABLE i_ekkn
    FOR ALL ENTRIES IN p_lt_proj
    WHERE ps_psp_pnr = p_lt_proj-pspnr
    AND ps_psp_pnr > 0.
    In EKKN we have 200 000 entries.
    Is there any other options we could try?
    Regards,
    Jarmo

    Thanks for your help, this problem seems to be quite challenging...
    In EKKN we have 200 000 entries. 199 999 entries have value of 00000000 in column ps_psp_pnr, and only one has a value which identifies a WBS element.
    I believe the problem is that there isn't any WBS element in PRPS which has the value of 00000000. I guess that is the reason why EKKN is read sequantially.
    I also tried this one, but it doesn't help at all. Before the SELECT statement is executed, there are 594 entries in internal table p_lt_proj_sel:
      DATA p_lt_proj_sel LIKE p_lt_proj OCCURS 0 WITH HEADER LINE.
      p_lt_proj_sel[] = p_lt_proj[].
      DELETE p_lt_proj_sel WHERE pspnr = 0.
      SORT p_lt_proj_sel by pspnr.
      SELECT ps_psp_pnr ebeln ebelp zekkn sakto FROM ekkn
      INTO CORRESPONDING FIELDS OF TABLE i_ekkn
      FOR ALL ENTRIES IN p_lt_proj_sel
      WHERE ps_psp_pnr = p_lt_proj_sel-pspnr.
    I also checked that the index P in EKKN is active.
    Can I somehow force the optimizer to use the index?
    Regards,
    Jarmo

  • Time Limit Exceeded. JDBC Adapter

    Hello guys,
    we have problem in an interface in production.
    The interface is asynchronous and is File -> PI -> JDBC
    Some messages have sometimes an error in PI monitorization, and we can see the next error:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Receiver Grouping
      -->
    - <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SYSTEM_DUMP</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>XXXX : XXXX___0000 : Time limit exceeded.</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    It seems there is an error when sending to the JDBC adapter? The concurrency of the adpter is set to 1 and we send 7 messages to the same adapter and the messages are executed more or less at the same time.
    Could we have to do some PI configuration about queues? or maybe is about the concurrency of the adapter?
    Many thanks in advance.
    Regards,
    Xavier.

    You might need to increase MAXIMUM CONCURRENCY > 1 and set poolWaitingTime > 0 as per SAP Note 831162. By doing this will alow JDBC Receiver to process concurrency the request from Integration Engine.
    or you also can try to increase "Recv.maxConsumers" for JDBC Adapter. The current value is 5
    In addition above, since more messages are concurrently happening more or less at the same time, I would recommend also to use this parameter setting.... Go to advanced tab in the jdbc receiver channel.
    check the option "Disconnect from Database After Processing Each message".  This would help if the connection is not immediately return to the other thread after serving the first thread.  Plus it is a best practice to follow up.

  • Runtime error(Time limit exceeds)after executing select query

    Dear experts, whenever i executing the select query in this zprogram i am getting runtime error that time limit exceeds.i am using inner join and into table.after that also i am geetting error. how can i resolve it??
    SELECT LIKP~VBELN LIKP~WADAT_IST LIKP~VEHICLE_NO LIKP~TRNAME
              LIKP~VEHI_TYPE LIKP~LR_NO LIKP~ANZPK LIKP~W_BILL_NO
              LIKP~SEALNO1                                       " Seal NO1
              LIKP~SEALNO2                                       " Seal NO2
              LIPS~LFIMG
              VBRP~VBELN VBRP~VGBEL VBRP~MATNR VBRP~AUBEL VBRP~FKIMG
              VBAK~AUART
              VBRK~FKART VBRK~KNUMV VBRK~FKSTO
              FROM LIKP INNER JOIN LIPS ON LIKP~VBELN EQ LIPS~VBELN
                        INNER JOIN VBRP ON LIKP~VBELN EQ VBRP~VGBEL
                        INNER JOIN VBAK ON VBRP~AUBEL EQ VBAK~VBELN
                        INNER JOIN VBRK ON VBRP~VBELN EQ VBRK~VBELN
              INTO TABLE  I_FINAL_TEMP
              WHERE LIKP~VSTEL = '5100' AND
                 LIKP~WADAT_IST IN S_WADAT  AND
                    VBRP~AUBEL IN S_AUBEL AND
                    VBAK~AUART IN ('ZJOB','ZOR') AND
                    VBRK~FKART IN S_FKART AND
    *               VBRK~FKART IN ('ZF8','ZF2','ZS1') AND
                    VBRK~FKSTO NE 'X'.
    When I am debugging the select query.the cursor will not go to next step.after 15-20 minutes i am getting runtime error(time limit exceeds).
    how can i resolve it for that scenario??

    Looks like whole SD flow you trying to fetch in single query
    First you check the database statistic of these table are upto date in system ( Check with basis team )
    if this query was working fine earlier.
    Most of table involved are huge volume tables which queried with any primary key
    Any secondary index on created for LIKP on VSTEL WADET ?
    My suggestion would be split the selection queries and make use of primary or existing secondary index to fetch the desired result if possible. For testing purpose split the queries and find which is taking more time and which needs index by taking squel trace in ST05.
    Also take ST05 trace of this query in debugger ( New debugger -> special tool -> trace > ST05/SE30)

  • Time Limit exceeded error in R & R queue

    Hi,
    We are getting Time limit exceeded error in the R & R queue when we try to extract the data for a site.
    The error is happening with the message SALESDOCGEN_O_W. It is observed that whenever, the timelimit error is encountered, the possible solution is to run the job in the background. But in this case, is there any possibility to run the particular subscription for sales document in the background.
    Any pointers on this would be of great help.
    Thanks in advance,
    Regards,
    Rasmi.

    Hi Rasmi
    I suppose that the usual answer would be to increase the timeout for the R&R queue.
    We have increased the timeout on ours to 60 mins and that takes care of just about everything.
    The other thing to check would be the volume of data that is going to each site for SALESDOCGEN_O_W. These are pretty big BDOCs and the sales force will not thank you for huge contranns time 
    If you have a subscription for sales documents by business patrner, then it is worth seeing if the business partner subscription could be made more intelligent to fit your needs
    Regards
    James

  • Time Limit Exceeded in File - java- IDOC

    Hello,
    I have an interface which reads a text file in XI and uses a java mapping to produce IDOCs in an R3 system synchronously, the interface was running fine for more than 2 years . Since the text file is larger than 20 MB, we are splitting into small text files (2mb each) for easier processing. While processing, each file will hold the outbound queue (SMQ2) until it gets completed. after 2 years of using this interface, it started giving errors in the queue (Time Limit Exceeded) for files larger than 1mb.
    Any hint ??

    Swarup,
    increasing the RFC adapter time out from the visual admin has solve the problem,
    thank you for that.
    but what I was looking for is a way to find out what could be the root cause, since it was running 2 years with (300000 ms time out) without a problem. Now I must increase this time out which mean my system is not performing well!
    Agasthuri,
    as I mentioned, it was running fine with 2mb, now even 1mb cannot be proccessed,
    Thanks again.

  • Message getting stuck in XBQO queue - Time limit exceeded

    Hi All,
    We have a BPM scenario in our project (on PI 7.0 SP18), where bundle of PEXR2002 Payment IDocs are received as a single flat file. This file is then consumed by the BPM, to split the message into multiple payments using Java Mapping.
    However, when we get an IDoc file of size greater than 5 MB (more than 500 IDocs), the message gets stuck in XBQO queue and eventually giving a SYSFAIL with the message "Time limit exceeded". Could you please let us know if you have encountered a similar issue and are aware of a possible solution.
    Any pointers to this will be really appreciated.
    Thanks & Regards,
    ROSIE SASIDHARAN

    H Rosie,
    1)  Goto SXMB_ADM-> Integration Engine Configuration->Parameter  EO_MSG_SIZE_LIMIT->possible values 0 - 2,097,151 (KB)
    The parameter EO_MSG_SIZE_LIMIT enables serial processing of messages of a particular size. This applies for messages with the quality of service Exactly Once (EO). If the message is larger than the parameter value, the message is processed in a separate queue.
    2)  Goto SXMB_ADM-> Integration Engine Configuration->Parameter  HTTP_TIMEOUT->possible values n Seconds, where n is a whole number.
    The parameter Specifies the timeout for HTTP connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
      See SAP Note 335162  for sysfail issue....
      Hope these will help u....
    Regds,
    Pinangshuk.

  • APO jobs cancelled due to error- Time limit Exceed.

    Dear All,
    Three jobs are scheduled daily to transfer data from R/3 to APO,
    These are cancelled due to error -"Time limit exceed".

    Hi Pankaj,
    There is a specific time allocated for each queue to clear and to get transferred across the system. the probable reasons are.
    1. The queue itself is taking more than the allocated time to clear due to system load. Each queue requires specific free memory from server , in case of overload system is unable to allocate desired memory hence the error might appear.
    2. If in a queue the very first entry is stuck due to x,y,z reason the queues following automatically go into "timeout" and then "system fail"
    Proposed solution.
    1. Analyze the first entry functionally. If Ok then ask the basis team to clear that particular entry.
    2. after time out the queue will go to "SYSFAIL". Double clicking on this will reveal the reason. Based on the technical reason I can suggest the relevant OSS notes to be applied.
    For detailed technical analysis check t-code CFG1.
    Regards,
    Ankur
    Edited by: Ankur Shrivastava on Dec 19, 2007 5:58 AM

  • Time limit exceeded.

    Hi XI Gurus,
    We are facing the Time limit exceeded error while processing the inbound Queue..
    Kindly provide some solution for the same.
    Regards,
    Anguraj.

    Hi,
    check out the message that caused that and the reason for the timeout will be shown inside - it's probably not the queue timeout (which can be changed in SMQR) but some other timeout - you will see it inside your XI message
    Regards,
    Michal Krawczyk

  • Time limit exceeded during activation of ODS.

    Hi all ,
    Iam loading data to 0FIA_DS12 from 80FIA-DS11 , while activating the ODS it is giving me the errors
    Time limit exceeded. No return of the split processes
    Background process BCTL_46TLB77BCWTDNQIKN0772P16K terminated due to missing confirmation
    Error during confirmation of process 000002
    Iam not able to get this error , tried to activated it again but not working.
    Could anybody help me in this regard as its a bit urgent as we r working in production..
    Thanks in advance

    Hi,
    I am getting the short dump.
    TYPELOAD_NEW_VERSION
    Short text
        A newer version of data type "/BI0/AFIA_DS1240" was found than one required
    What happened?
        Runtime error
        The current ABAP program "GP46APBHXXAZADBZKVPTC7TA81O" had to be terminated
         because one
        of the statements could not be executed at runtime.
    What can you do?
        Restart the program.
        If the error persists, contact your SAP administrator.
        You can use the ABAP dump analysis transaction ST22 to view and manage
        termination messages, in particular for long term reference.
    Error analysis
        The data type "/BI0/AFIA_DS1240" was loaded from the database during the
         program run.
        However, a type of a newer version than the one requried was found here.

  • RFC_ERROR_SYSTEM_FAILURE: Time limit exceeded. Connection Pool - JCO api

    Hi Everyone
    My Connection  Pool parameters JCO api.
    client=300
    user=SISGERAL_RFC
    passwd=******
    ashost=14.29.3.120
    sysnr=00
    size=10
    I have these parameters on my Connection Pool and sometimes appear these wrongs in my application:
    1.
    2006-01-07 13:20:37,414 ERROR com.tel.webapp.framework.SAPDataSource - ##### Time limit exceeded. LOCALIZED MESSAGE = Time limit exceeded. KEY = RFC_ERROR_SYSTEM_FAILURE GROUP = 104 TOSTRING = com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Time limit exceeded.
    2.
    2006-01-07 14:01:31,007 ERROR com.tel.webapp.framework.SapPoolConnectionManager - Timeout
    I’d like to know if is happening.
    Are there something wrong with my connection pool?
    What can be happening?
    Thanks

    Raghu,
    Thanks for your response.
    Yes, the pool connections are in place according to the sAP note mentioned above.
    Regards,
    Faisal

  • Short dump "Time limit exceeded" when searching for Business Transactions

    Hello Experts,
    We migrated from SAP CRM 5.2 to SAP CRM 7.0. After migration, our business transaction search (quotation, sales order, service order, contract etc) ends with the short dump "Time limit exceeded" in class CL_CRM_REPORT_ACC_DYNAMIC, method DATABASE_ACCESS. The select query is triggered from line 5 of this method.
    Number of Records:
    CRMD_ORDERADM_H: 5,115,675
    CRMD_ORDER_INDEX: 74,615,914
    We have done these so far, but the performance is still either poor or times out.
    1. DB team checked the ORACLE parameters and confirmed they are fine. They also checked the health of indices in table CRMD_ORDER_INDEX and indices are healthy
    2. Created additional indices on CRMD_ORDERADM_H and CRMD_ORDER_INDEX. After the creation of indices, some of the searches(without any criteria) work. But it takes more than a minute to fetch 1 or 2 records
    3. An ST05 trace confirmed that the selection on CRMD_ORDER_INDEX takes the most time. It takes about 103 seconds to fetch 2 records (max hits + 1)
    4. If we specify search parameters, say for example a date or status, then again we get a short dump with the message "Time limit exceeded".
    5. Observed that only if a matching index is available for the WHERE clause, the results are returned (albeit slowly). In the absence of an index, we get the dump.
    6. Searched for notes and there are no notes that could help us.
    Any idea what is causing this issue and what we can do to resolve this?
    Regards,
    Bala

    Hi Michael,
    Thanks. Yes we considered the note 1527039. None of the three scenarios mentioned in the note helped us. But we ran CRM_INDEX_REBUILD to check if the table CRMD_ORDER_INDEX had a problem. That did not help us either.
    The business users told us that they mostly search using the date fields or Object ID. We did not have any problem with search by Object ID. So we created additional indices to support search using the date fields.
    Regards,
    Bala

  • TIME LIMIT EXCEEDED ERROR WHILE EXECUTING DTP

    Hi gurus,
    I Have got an error while executing
    The errors are as follows.
    1.Time limit exceeded. No return of the split processes
    2.Background process BCTL_DK9MC0C2QM5GWRM68I1I99HZL terminated due to missing confirmation
    3.Resource error. No batch process available. Process terminated
    Note: Iam not  executing the DTP as a back ground job.
    As it is of  higher priority the answers Asap Is appreciated.
    Regards
    Amar.

    Hi,
    how is it possible to execute a DTP in dialog process. In my mind it is only possible for debugging...
    In "Display Data Transfer Process" -> "Goto" -> "Settings for Batch Manger" you can edit settings like Number of Processes or Job Class.
    Additional take a look at table RSBATCHPARALLEL and
    http://help.sap.com/saphelp_nw04s/helpdata/en/42/f29aa933321a61e10000000a422035/frameset.htm
    Regards
    Andreas

  • Time Limit exceeded while running in RSA3

    Hi BW Experts,
      I am trying to pull 1 lakh data from CRM to BI System.
    Before scheduling, i am trying to execute in RSA3.I am getting the error message as "Time Limit Exceeded".
    Pls suggest, why it is happening like this.
    Thanks in advance.
    Thanks,
    Ram.

    Hi,
                because huge data with in the stipulated time it is not executing and showing the all records ,so it is better to go any selection option by each document type or some else then u can add all the documents ,anyway in bw side we r running this job in background so no problem.if u want see all records at a  time then u can discuss with ur basis people to extend the time for that.
    Thanks & Regards
    sathish

  • Time Limit Exceeded while executing Proxy Program

    Hi all,
    we are  frequently facing Time Limit Exceeded problem in R/3 system while exceuting proxy program for large payloads (appx 5-7 MB). Sometimes we are able to successfully restart the message and sometimes we have to delete these messages. How can we resolve this issue.
    Thanks,
    Mayank

    hi Joerg,
    we are getting this error in inbound queue in R/3 system, also this is a async call, so no chance of any communication interruption b/w SAP systems. From PI system, message is succeccfully passed to R/3 system & Time Limit Exceeded is coming in R/3 system inboud queue (SMQ2). Is it poosible that timeout will happen within R/3 system.
    Thanks,
    Mayank

Maybe you are looking for

  • Issues with writing html coding and how safari interprets it

    Hi, I have been having a frustrating 24 hours with my basically brand new iMac. I have just started a course in web design and just doing a basic html unit. When I put the following in Textedit it comes up very strangely. <!DOCTYPE html PUBLIC "-//W3

  • Using BIA_RegisterCalcValidationProgram in Excel AUTO_OPEN macro

    The documentation for the Spreadsheet Addin, section 5.5, states: "You can include the BIA_RegisterCalcValidationProgram() macro in the auto_open procedure to automatically register the program for calculation and validation when a workbook is opened

  • Version 8.1 and 9.0 coexistence

    Hi, can SJSAS 8.1 PE and 9.0 PE coexistnce at the same Solaris 9 server? Is it suitable for production environment? Thanks

  • Keyword list image count is greater than metada keyword image count.

    How do you get the image counts to be the same? I have looked through the images of the offending keywords and there are no check marks against other keywords. Also above the film strip the total of all images selected is less than the total images.

  • Can i buy previous model imacs from the apple store?

    if i wanted to buy the last imac model shipped with snow leopard (for software compatibility reasons), where can i do that? is it available in the online store? years ago, i remember seeing old model imac/products sold there. i don't mean the pre own