LDAP user profile entries
Hello,
I am trying to setup Sun Java 2005Q4 Directory server and Messaging server to work interoperable replacing NIS and sendmail.
The question is what entries should be in user ldif profile to provide nis and mail capabilities at the same time?
What else (schema, cli, etc) should be done to provide these capabilities?
Again, the main thing is to provide naming and mail entries in one user profile.
Currently I have the following user entries:
dn: uid=testuser,ou=People,o=domain.com,o=ldap
cn: testuser
uidNumber: 1177
gidNumber: 2000
gecos: Test User
homeDirectory: /home/testuser
loginShell: /usr/bin/tcsh
objectClass: posixAccount
objectClass: shadowAccount
objectClass: account
objectClass: top
uid: testuser
shadowLastChange: 12926
shadowFlag: 0
userPassword: [crypt} BnBnBNBn
Any help will be greatly appreciated and summarized.
The short and proper way of doing this is to prepare the instance of the directory with the individual scripts for each product. These scripts not only add the required schema but also indexes and other changes. For messaging the script is "comm_dssetup.pl" and for LDAP as naming services it is "idsconfig". Since they are independant of each other you can execute them in any order but you must follow the documentation on how to execute these and what pre-requisites to fulfill.
Regards,
-Wajih
Similar Messages
-
LDAP user profile messaging entries
Hello,
I am trying to setup Sun Java 2005Q4 Directory server and Messaging server to work interoperable replacing NIS and sendmail.
The question is what entries should be in user ldif profile to provide nis and mail capabilities at the same time?
What else (schema, cli, etc) should be done to provide these capabilities?
Again, the main thing is to provide naming and mail entries in one user profile.
Currently I have the following user entries:
dn: uid=testuser,ou=People,o=domain.com,o=ldap
cn: testuser
uidNumber: 1177
gidNumber: 2000
gecos: Test User
homeDirectory: /home/testuser
loginShell: /usr/bin/tcsh
objectClass: posixAccount
objectClass: shadowAccount
objectClass: account
objectClass: top
uid: testuser
shadowLastChange: 12926
shadowFlag: 0
userPassword: [crypt} BnBnBNBn
Any help will be greatly appreciated and summarized.Roger,
Thank you for your response.
This is a nice manual, but it does not solve the problem. I am actually did set up DS for naming service, and it is working well.
But, if I am installing messaging server in addition to DS it creates problem.
I think it modifies the schema, which is not supporting naming objects as posixAccount, etc. If I try to add them to the mail accounts created by Delegated Admin, I've got an object class violation error.
Thank you, -
Cannot select ldap user profile for SGD Global Admin
Hi all,
I'm trying to select some ldap users to be in the SGD Global Administrators role, but I am unable to check the check box next to the user profile once I navigate to the account. There is no check box to check.
I am actively using LDAP for regular user auth and application assignment, so I know my LDAP "works" in that sense, I just can't use it to assign global admins.
Any thoughts?
AdamThe only way to do this is to create a user profile for the (would-be) admin account. And since they're an LDAP user, you'll have to use LDAP mirroring to do this. For example, let's say the user you want is "cn=Joe Admin, ou=Users, dc=example, dc=com"
Go to "User Profiles", and browse to/open:
dc=com
cd=example
create the directory object "ou=Users"
Inside of "ou=Users", create the user profile object "cn=Joe Admin"
Add this user object to the Global Administrators role.
http://docs.sun.com/source/820-4907/chapter3.html#d0e13589 -
How can I update all user profile entries at once?
I test web applications with Firefox and use the -P (user) -no-remote options on the command line to keep the sessions independent. In other words, I have created many dozens of desktop shortcuts with specific users and within each instance of Firefox for each user, the default home page is set. This all works fine...I click on as many shortcuts as I want, they all open up different sites I'm testing, and they're all independent of each other.
The problem is when Firefox updates itself. It's annoying to have to answer the update question, and to be routed to the update page 50 times (the first time I use that shortcut after the update). This is also true for plug-ins.
So is there any way for me to prevent having the update messages appear in each separate user's first run after update?You posted here with Firefox 9.0.1, is that the version you are using on that test PC? <br />If so, update to Firefox 10.0.1 and see the new ''(as of 10.0)'' first start after a program update routine. Mozilla changed the add-on compatibility check that kicks in when the Firefox version number has changed. It's probably going to make your issue worse, time wise, after a Firefox program update.
As far as updating all the Profiles at the same time, '''LastVersion''' data is kept in the '''compatibility.ini''' file in each Profile - ''LastVersion=10.0.1_20120208060813/20120208060813'' - Firefox checks that file each time the Profile is used. When the version number currently being launched doesn't match the saved pref, it triggers the "updated" routine (but it works for the version used being older or newer than the pref).
The only thing I can think of is to run a '''batch''' file to update the '''LastVersion''' value change in all the Profiles that weren't used for receiving the Firefox update, to match the new LastVersion. -
I manage a couple of different version of SharePoint, which we are in the process of migrating to SharePoint 2013. I have a problem which I am not sure how to resolve. We are using MetaLogix to migrate site and site collection data from an older SharePoint
2007/WSS3.0 server environment into our new SharePoint 2013 environment and we are having a problem with user profiles that get created.
I have SharePoint 2013 set up for "SharePoint Profile Synchronization" and some of our user's profiles are being created in an older format that shows the user's claims account information, rather than the more fancy profile type that allows us
to include pictures and click on "follow this person" links.
If we manually delete the profile, it will be recreated properly however, as we are migrating many sites and collections over, it is near impossible to do this and keep track of each user so that their profiles can be deleted and recreated.
Is there some way to change this behavior so that SharePoint will only create the newer style of user profile?These 'profiles' are you looking at them in the User Profile Service Application itself or are you looking at site collections? There is a huge difference between the two but people often miss it.
In most cases you'll have some partial information on the Site Collections but when you click through to their actual profile (not just their User Information List entry) you'll see the prettier version. That information is normally internally synchronised
by a timer job but that may not have run yet and/or the fact that your users haven't actually used the site may be causing it not to update them (it's an efficiency matter).
Finally: Drop your sales guy at Metalogix an email, they will bounce it to one of their techies and they'll have seen it a million times. -
Unable to push user profiles to AD groups with Profile Manager since upgrade to Server v3
Since upgrading our OS X Mac server from 10.8.5 to 10.9.1, and OS X Server app to v3 (now 3.0.2) I have been unable to push or modify user profiles to AD groups (or AD users) using Profile Manager. This was working fine on OS X 10.8.5. Pushing device profiles is still working OK after the upgrade.
From what I can see from the logs on the client side and server side, it seems related to a problem with the mdm authtoken.
In the client console I can see this entry:
27/01/14 14:30:15.844 mdmclient[38557]: *** ERROR *** [Agent:636102071] Unable to proceed with connection to: https://ourserver.ourdomain/devicemanagement/api/device/mdm_connect (com.apple.mdmconfig.mdm) because don't have valid MDM AuthToken
On the server, in the php.log I can see the corresponding attempt to authenticate:
1::Jan 27 14:29:50.930 [158] <192.168.28.171> {require_once (mdm_checkin.php:11)} vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv - PUT mdm_checkin
0::Jan 27 14:29:50.931 [158] <192.168.28.171> checkin: 'UserAuthenticate'
1::Jan 27 14:29:50.936 [158] <192.168.28.171> {Target_for_incoming_request (target.php:209)} Found target NETWORK LS: <User[156]@ourclientmachine>
0::Jan 27 14:29:50.937 [158] <192.168.28.171> {LabSession_validate_auth_token (mdm_checkin.php:22)} Failed auth for target NETWORK LS: <User[156]@Device[1697]>, incoming_request={
0::Jan 27 14:29:50.937 [158] <192.168.28.171> 'MessageType'=>'UserAuthenticate',
0::Jan 27 14:29:50.937 [158] <192.168.28.171> 'UDID'=>'17aff5c5a40f51acbbd78023d0028c80',
0::Jan 27 14:29:50.937 [158] <192.168.28.171> 'UserID'=>'A5EA25B7-7CCD-4EF4-B240-F23DED275EEC'
0::Jan 27 14:29:50.937 [158] <192.168.28.171> }
1::Jan 27 14:29:50.965 [158] <192.168.28.171> {SendFinalOutput (mdm_checkin.php:145)} Sent Final Output (407 bytes)
1::Jan 27 14:29:50.965 [158] <192.168.28.171> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - /devicemanagement/mdm/mdm_checkin
0::Jan 27 14:29:50.965 [158] <192.168.28.171> {SendFinalOutput (mdm_checkin.php:145)} Completed in 34ms | 200 OK [https://ourserver.ourdomain/devicemanagement/api/device/mdm_checkin]
So I can see there is a failure to authenticate, but don't really know how to troubleshoot this further. Or maybe this is just a bug in the new server app?
I have tried to remove and re-enroll clients in Profile Manager but no joy there.
In the client's Keychain I can see an MDM user AuthToken linked to the correct user account.
Thanks in advance for any help or suggestionsI just wanted to update my post, as this issue for me is resolved.
I uninstalled and reinstalled the Server.app on our Mac server, since then I've been able to push profiles to AD Users and Groups. I guess that in my case the Server app got into a bit of a mess when it was upgraded to v3.
Now the next headache I have is that my AD Groups which are displayed in Profile Manager are not syncing any recent changes. I think I'm probably seeing the same issue as described in this post
https://discussions.apple.com/message/25420919#25420919 -
Unable to start User Profile Sync Service
Hi,
I am currently facing some issues with starting the User Profile Sync Service on my SP2013 farm.. I was wondering if someone could help me out a bit.
I have successfully installed the SP2013 farm on a environment that has access to our AD etc. and I have also
restored the database from SP2007 and converted it to Claims authentication etc. The one thing I can’t get to work is to enable the User Profile Sync Service on the server. I have checked quite a bit of TechNet blogs and other sites and tried almost everything
suggested but it still fails. I’ve also recreated the farm from scratch yesterday again but no luck still
L.
The below is what I have done:
Farm Admin account – spadmin2013 is local admin on all SP Farm servers (2 WFE and 2 APP Servers) and has log on locally rights as well on security policy. On the SQL DB it has dbo permissions on the Sync, Profile and Social DB’s.
Farm Service account – spservice-s is a managed farm account that is used to run the various services of the farm (used during the config wizard part).
From within the Admin Control Panel I have verified the managed accounts and it is indeed spadmin2013 which owns the User Profile Sync Service (not the application itself). When I try to start the service it tries to do that for 5-10 minutes and then fails
and goes back to stop and I do not see any error. I have created a custom service application with new database that runs on spadmin2013/spfarm/ldap accounts etc. I can see from the Windows services – FIM and FIMSync service try to start using the spadmin2013
and then go back to disabled. I have also tried giving the spadmin2013 rights to replicate the AD as few blogs suggested that. I am not sure where this is going wrong or what is missing. I had successfully got this to work and still can get it to work on my
first SP2013 server which is a standalone – running SQL, SP app and WFE on the same box.
In fact I also tried to activate this service first before I joined my 3 other servers to the farm and had no luck. I am kinda lost here as to what is going on!Right. i ran a new log as suggested. I have also cleared the config cache and created a Powershell profile as suggested in this link - http://blogs.msdn.com/b/bryanbolling/archive/2014/01/02/unable-to-start-user-profile-synchronization-service.aspx
I checked the ULS Logs and i can see the below error -
ILM Configuration: Validating account.
ILM Configuration: Validating the system groups
ILM Configuration: Setting up WMI
ILM Configuration: Setting required permissions
ILM Configuration: Create install config file
ILM Configuration: Update source project
ILM Configuration: Changing service account credentials
ILM Configuration: Setting policy for service account
Updating SPPersistedObject UserProfileApplication Name=User Profile Sync Service. Version: 63903 Ensure: False, HashCode: 55647834, Id: ef1ec55c-aa15-4cb7-a9fe-498382a88b4e, Stack:
at Microsoft.Office.Server.Administration.UserProfileApplication.Update()
at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance profileSyncInstance)
at Microsoft.Office.Server.Administration.ProfileSynchronizationSetupJob.Execute(SPJobState state)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
SQL connection time: 131.92704 for Data Source=SPSQLAGL;Initial Catalog="Sync DB";Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name="SharePoint[OWSTIMER][1][Sync DB]"
ILM Configuration: Configuring database
ILM Configuration: Error 'ERR_CONFIG_DB'
UserProfileApplication.SynchronizeMIIS: Failed to configure MIIS post database, will attempt during next rerun. Exception: System.Configuration.ConfigurationErrorsException: ERR_CONFIG_DB
at Microsoft.Office.Server.UserProfiles.Synchronization.ILMPostSetupConfiguration.ValidateConfigurationResult(UInt32 result)
at Microsoft.Office.Server.UserProfiles.Synchronization.ILMPostSetupConfiguration.ConfigureMiisStage2()
at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance profileSyncInstance).
UserProfileApplication.SynchronizeMIIS: End setup for 'User Profile Sync Service'.
Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: 63899 Ensure: False, HashCode: 36296732, Id: 7aeb377f-8bd1-453d-b6be-6a373eaf350d, Stack:
at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
at Microsoft.Office.Server.Administration.ProfileSynchronizationSetupJob.Execute(SPJobState state)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Leaving Monitored Scope (Timer Job ProfileSynchronizationSetupJob). Execution Time=6041.65717333333
Name=Timer Job User Profile Sync Service_ProfileSynchronizationJob
Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: -1 Ensure: False, HashCode: 13918585, Id: 21e01df1-8772-487d-bd56-f699b3912bda, Stack:
at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
at Microsoft.Office.Server.Administration.UserProfileApplication.StartSynchronizationServiceSetupTimer(String strSyncMachineAddress)
at Microsoft.Office.Server.Administration.UserProfileApplication.SynchronizeMIIS()
at Microsoft.Office.Server.Administration.ILMProfileSynchronizationJob.Execute()
at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: 63913 Ensure: False, HashCode: 13918585, Id: 21e01df1-8772-487d-bd56-f699b3912bda, Stack:
at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
at Microsoft.Office.Server.Administration.UserProfileApplication.StartSynchronizationServiceSetupTimer(String strSyncMachineAddress)
at Microsoft.Office.Server.Administration.UserProfileApplication.SynchronizeMIIS()
at Microsoft.Office.Server.Administration.ILMProfileSynchronizationJob.Execute()
at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
I have verified the spadmin2013 does have dbo permissions and also is part of security & sysadmin in sql server. I run SQL 2012 with SP1 -
Windows Server 2012 R2 RDS + User profile Disks + App-V = Explorer.exe crashing all of the time
I have built a new RDS farm on Windows Server 2012 R2 with two Session Hosts and a combined Connect Broker/Web Access server. I had the farm up and running with User Profile Disks and all seemed OK. However, as soon as I installed the App-V 5.0 SP2 RDS
client on the session hosts, the explorer.exe process started crashing for any user logging in via the Web Access site. The process crashes and restarts every five to ten seconds. It's the same for administrators. If they log in via Web Access explorer.exe
crashes, but if they RDP directly to one of the session hosts explorer.exe is fine. If I reboot the session hosts, then the first user to log in via Web Access has a stable desktop session (and appears to have a new profile as well). However, if that user
logs out and back in again, explorer.exe starts crashing again. The only applications I have packaged at the moment are Office 2013 and Firefox.
I tried disabling User Profile Disks, but this caused a whole bunch of other problems and I eventually lost the ability to log in at all via Web Access (errors about the user profile service). As this is a small pre-production environment I completed scrapped
all of the servers and rebuilt from scratch. Again, everything appeared fine until I installed the App-V client, then explorer.exe started crashing repeatedly for all users.
Has anyone come across this issue before? I have tried installing the App-V 5.0 SP2 Hotfix Package 2, but this didn't help. I have read in a few forums that App-V doesn't work very well with User Profile Desks, but I have not heard of this particular issue.
Similarly, SP2 seems to have a lot of problems, so I am going to try removing App-V RDp Client SP2 and installing SP1. I ahev also deleted User Profile Disks for the test users to recreate their profiles, but this didn't help either.
Any other suggestions welcome!I forgot to include the application event log entry for explorer.exe crashing:
Faulting application name: explorer.exe, version: 6.3.9600.17039, time stamp: 0x53156588
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17055, time stamp: 0x532954fb
Exception code: 0xc06d007e
Fault offset: 0x0000000000005bf8
Faulting process id: 0xae8
Faulting application start time: 0x01cfab3a273787fd
Faulting application path: C:\Windows\explorer.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 69210d77-172d-11e4-80c6-0050560102d1
Faulting package full name: -
Sharepoint 2013 - Active Directory Import User Profile Property manager fields
Hi there,
I juste encountered actually a little issue regarding the Active Directory Import User Profil.
Importation seems to work well but I have a little problem regarding the Manager field.
When I verify a user profil through the sharepoint admin page ("Manage user profil") , I can see the manager field is correctly populated, but if I want to check my profil as a user (personal information), the manager field is not visible.
With Sharepoint Admin and Manage Profil Properties, I haven't the possibility to modify some settings for the manager.
For example, Policy parameters is greyed.
The only way I found to show this field in a user profil is to give the permission "allow users to Edit values ...".... setting I don't want to set.
Have you already this sort of issue ?
Thanks for your help/idea.Hi Michael,
I don't remember well what I did exactly regarding this issue because I played a lot with user profil.
I know I used this powershell script from Sheyia which in fact help me a lot to clean and create a good profil setting.
http://blogs.technet.com/b/sheyia/archive/2013/10/09/sharepoint-2013-another-way-to-change-order-for-user-profile-properties-via-powershell.aspx
For example, this script help me to resolve some double entries.
Let-me know if it help you (or not of course) -
Initiall SharePoint Server 2013 setup -- unable to manage new User Profile Service Application
During initial farm setup, creating an initial User Profile Service Application works fine. However, once it's created, I cannot 'manage' it through the Manage Service Applications page in central
admin.
I get a generic error (Sorry, something went wrong / unexpected error) with a correlation ID that doesn't seem to match any ULS log entries. (Yes, I merged logs from all machines in the farm.)
A Windows event log entry says:
A failure was reported when trying to invoke a service application: Endpoint Failure
Also frequent errors in ULS logs: (see below)
UserProfileApplicationNotAvailableException
User Profile Application Proxy failed to retrieve partitions from User Profile Application: Micro…
SPDistributedCache DataCacheException
I did notice that the file 'ProfileService.svc does not exist in SharePoint's web services app at the URL you see in the error. (below)
I also found it interesting that the event log error shows 1 active endpoint and 3 failed endpoints. I have 2 WFEs and 2 app servers. But I'm only trying to get the user profile service app running on the application
servers. I have deleted and recreated this service app several times under various names (deleted/recreated its app pool as well) and wonder if these other failed endpoints could be orphans from previous instances...
Any thoughts on how I might successfully create this service application? I've already been Binging my head against a wall long enough that I would have been better off reinstalling the entire farm... I may still
do that.
FYI, my farm came from a slipstreamed SP1 install package, and received the July CU after several other things were already configured, including the already-failed UP service application.
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 8/8/2014 6:11:54 PM
Event ID: 8313
Task Category:
Topology
Level: Error
Keywords:
User: xyz\sp_farm
Computer: spapp1.xyz.local
Description:
A failure was reported when trying to invoke a service application: EndpointFailure
Process Name: w3wp
Process ID: 4284
AppDomain Name: /LM/W3SVC/560632691/ROOT-1-130519915587486075
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:3
Affected Endpoint:
http://spapp1:32843/3f215b603e634a629875945488863f75/ProfileService.svc
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>8313</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>13</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-08-08T23:11:54.738080000Z" />
<EventRecordID>14550</EventRecordID>
<Correlation ActivityID="{02A1AC9C-1125-6026-E124-A52653003266}" />
<Execution ProcessID="4284" ThreadID="16072" />
<Channel>Application</Channel>
<Computer>spapp1</Computer>
<Security UserID="S-1-5-21-499312637-3451022336-10712144539-44056" />
</System>
<EventData>
<Data Name="string0">EndpointFailure</Data>
<Data Name="string1">w3wp</Data>
<Data Name="int2">4284</Data>
<Data Name="string3">/LM/W3SVC/560632691/ROOT-1-130519915587486075</Data>
<Data Name="int4">2</Data>
<Data Name="string5">urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc</Data>
<Data Name="int6">1</Data>
<Data Name="int7">3</Data>
<Data Name="string8">http://spapp1:32843/3f215b603e634a629875945488863f75/ProfileService.svc</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 8/8/2014 6:51:04 PM
Event ID: 8313
Task Category: Topology
Level: Error
Keywords:
User: VANTAGE\sp_farm
Computer: spapp1.vantage.local
Description:
A failure was reported when trying to invoke a service application: EndpointFailure
Process Name: OWSTIMER
Process ID: 8472
AppDomain Name: DefaultDomain
AppDomain ID: 1
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:3
Affected Endpoint:
http://spapp2:32843/3f215b603e634a629875945488863f75/ProfileService.svc
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>8313</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>13</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-08-08T23:51:04.938901900Z" />
<EventRecordID>14596</EventRecordID>
<Correlation />
<Execution ProcessID="8472" ThreadID="17360" />
<Channel>Application</Channel>
<Computer>spapp1.vantage.local</Computer>
<Security UserID="S-1-5-21-499312637-3451022336-10712144539-44056" />
</System>
<EventData>
<Data Name="string0">EndpointFailure</Data>
<Data Name="string1">OWSTIMER</Data>
<Data Name="int2">8472</Data>
<Data Name="string3">DefaultDomain</Data>
<Data Name="int4">1</Data>
<Data Name="string5">urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc</Data>
<Data Name="int6">1</Data>
<Data Name="int7">3</Data>
<Data Name="string8">http://spapp2:32843/3f215b603e634a629875945488863f75/ProfileService.svc</Data>
</EventData>
</Event>
20:22:31.94 SharePoint Portal Server User Profiles cm6y High
User Profile Application Proxy failed to retrieve partitions from User Profile Application: Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: UserProfileApplicationNotAvailableException_Logging
:: UserProfileApplicationProxy.ApplicationProperties ProfilePropertyCache does not have 6cd1c1f0-5874-4f8e-9c0a-ed1aff342048 at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext)
20:22:38.16 SharePoint Portal Server User Profiles d22b High
Failure retrieving application ID for User Profile Application Proxy 'User Profile Service Application': Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: UserProfileApplicationNotAvailableException_Logging
:: UserProfileApplicationProxy.ApplicationProperties ProfilePropertyCache does not have 6cd1c1f0-5874-4f8e-9c0a-ed1aff342048 at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_AppID()
20:22:44.25 SharePoint Foundation DistributedCache ah24v High
[Forced due to logging gap, cached @ 08/08/2014 20:22:38.16, Original Level: Verbose] DistributedCacheClient TransportProperties- ChannelInitializationTimeout '{0}', ConnectionBufferSize '{1}',
MaxBufferPoolSize '{2}', MaxBufferSize '{3}', MaxOutputDelay '{4}',ReceiveTimeout '{5}'.
20:22:55.26 SharePoint Foundation DistributedCache ah24w Unexpected
Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache' - Exception 'Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRCA0017>:SubStatus<ES0006>:There
is a temporary failure. Please retry later. (One or more specified cache servers are unavailable, which could be caused by busy network or servers. For on-premises cache clusters, also verify the following conditions. Ensure that security permission has been
granted for this client account, and check that the AppFabric Caching Service is allowed through the firewall on all cache hosts. Also the MaxBufferSize on the server must be greater than or equal to the serialized object size sent from the client.). Additional
Information : The client was trying to com...Thanks for the suggestion. I performed the service restarts, and then an iisreset an the two web servers, and the application server that does not run the services. Finally, I ran iisreset on the application server that does run the services.
After performing those steps, I still cannot manage the user profile service application.
ULS log at the time of the attempt contains User Profile Application Proxy errors (in my original post) and am also noticing the following error:
08:15:21.17 SharePoint Foundation General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException:
This User Profile Application's connection is currently not available. The Application Pool or User Profile Service may not have been started. Please contact your administrator. at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ManageUserProfileServiceApplicationBase.OnPreRender(EventArgs e) at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean
includeStag... -
Customized User Profiles not loading for Network Users
I manage Macs in public computer labs and classrooms at a university. My general set up is as follows:
Clients are running 10.8.5, OD Masters are running 10.7.5. Open Directory Master to manage client preferences for Login window and screen saver. Clients bind to Active Directory for authentication purposes only. Networked users home directories are stored locally then deleted at log out. Using Deploy Studio to image and restore clients.
My customized user profiles are stored in /User Templates/Non_Localized.lproj.(I also update English.lproj for any local users that may need to be created for various reasons).
Recently I have come across a situation where, randomly, my customized user profile does not load at Login, and I am given the out-of-the-box default Apple profile. This is happening in 11 of my 14 labs. I have three labs that seem to not be affected by this.
On some labs I manage the DHCP, some labs I do not, and rely on our Networking group to supply DHCP and DNS. Because of this setup I have six different DNS server that may be in the mix. Two are Unix boxes, the other four are the Active Directory Domain Control servers. I did create a spreadsheet of all the AD/OD settings for each lab to see if I could find some kind of pattern, but don't see a way to upload it.
The one thing I do notice is that when I do a mass login using a shell script via Apple Remote Desktop, when the profile fails to build correctly, the user login is quick, much quicker than when the correct profile loads. Almost as if a packet is sent the the OD server, it's rejected, and bam, Apple's default profile loads.
I have flushed the DNS cache of the local clients using killall --HUP mDNSResponder
I've got one week to figure this out before classes start, so if you have a clue as to what's going on, I sure would be grateful.
Here are logs from both the admin's account and the user's account when the default profile fails to build:
ADMIN log:
8/20/14 1:31:03.366 PM CVMServer[109] Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
8/20/14 1:31:03.389 PM loginwindow[44] Login Window - Returned from Security Agent
8/20/14 1:31:03.491 PM loginwindow[44] USER_PROCESS: 44 console
8/20/14 1:31:04.084 PM WindowServer[75] **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
8/20/14 1:31:06.307 PM locationd[563] NOTICE,Location icon should now be in state 0
8/20/14 1:31:06.478 PM coreaudiod[560] Enabled automatic stack shots because audio IO is inactive
8/20/14 1:31:06.621 PM UserEventAgent[548] cannot find fw daemon port 1102
8/20/14 1:31:08.530 PM WindowServer[75] Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:31:09.707 PM NetworkBrowserAgent[591] Starting NetworkBrowserAgent
8/20/14 1:31:10.393 PM apsd[593] Certificate doesn't match host
8/20/14 1:31:11.499 PM com.apple.SecurityServer[15] Session 100010 created
8/20/14 1:31:13.561 PM genatsdb[608] ########## genatsdb Sandboxed. ##########
8/20/14 1:31:13.562 PM apsd[593] Certificate doesn't match host
8/20/14 1:31:13.740 PM com.apple.time[548] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:31:14.555 PM apsd[593] Certificate doesn't match host
8/20/14 1:31:45.040 PM genatsdb[608] *GENATSDB* FontObjects generated = 1113
8/20/14 1:31:55.663 PM com.apple.time[548] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:32:20.627 PM WindowServer[75] CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.627 PM WindowServer[75] CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.627 PM WindowServer[75] CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.627 PM WindowServer[75] CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.628 PM WindowServer[75] CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.628 PM WindowServer[75] dict count after removing entry for window 0x2a is 0
8/20/14 1:32:20.641 PM com.apple.launchd[1] (com.apple.quicklook.satellite.4D0B4319-944D-49A6-A515-02F31AE3C235[628]) Could not terminate job: 3: No such process
8/20/14 1:32:20.641 PM com.apple.launchd[1] (com.apple.quicklook.satellite.4D0B4319-944D-49A6-A515-02F31AE3C235[628]) Using fallback option to terminate job...
8/20/14 1:32:20.645 PM coreservicesd[65] SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=188
8/20/14 1:32:20.647 PM coreservicesd[65] SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=147
8/20/14 1:32:20.647 PM coreservicesd[65] SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=194
8/20/14 1:32:20.648 PM WindowServer[75] CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75] CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75] CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75] CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75] CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.716 PM loginwindow[44] DEAD_PROCESS: 44 console
8/20/14 1:32:20.891 PM com.apple.time[548] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:32:20.929 PM WindowServer[75] CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75] CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75] CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75] CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75] CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.930 PM coreservicesd[65] SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=158
8/20/14 1:32:22.259 PM WindowServer[75] CGXRestartSessionWorkspace: session workspace exited for session 256 (on console)
8/20/14 1:32:22.259 PM WindowServer[75] Session 256 released (1 references)
8/20/14 1:32:22.259 PM WindowServer[75] Session 256 released (0 references)
8/20/14 1:32:22.259 PM WindowServer[75] loginwindow connection closed; closing server.
8/20/14 1:32:22.268 PM apsd[593] CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
8/20/14 1:32:22.285 PM loginwindow[653] Login Window Application Started
8/20/14 1:32:22.299 PM UserEventAgent[11] Captive: [UserAgentDied:139] User Agent @port=45319 Died
8/20/14 1:32:22.310 PM ARDAgent[574] CGSGetNextEventRecord (Inline) connection 0xb903, 16384 bytes
8/20/14 1:32:22.310 PM ARDAgent[574] CGSShutdownServerConnections: Detaching application from window server
8/20/14 1:32:22.310 PM ARDAgent[574] CGSDisplayServerShutdown: Detaching display subsystem from window server
8/20/14 1:32:22.311 PM blued[58] -[CBManager init] init returning self:0x7ff6a3b04990
8/20/14 1:32:22.329 PM WindowServer[654] Server is starting up
8/20/14 1:32:22.330 PM WindowServer[654] Session 256 retained (2 references)
8/20/14 1:32:22.330 PM WindowServer[654] Session 256 released (1 references)
8/20/14 1:32:22.333 PM WindowServer[654] Session 256 retained (2 references)
8/20/14 1:32:22.333 PM WindowServer[654] init_page_flip: page flip mode is on
8/20/14 1:32:22.357 PM WindowServer[654] mux_initialize: Couldn't find any matches
8/20/14 1:32:22.367 PM WindowServer[654] GLCompositor enabled for tile size [256 x 256]
8/20/14 1:32:22.367 PM WindowServer[654] CGXGLInitMipMap: mip map mode is on
8/20/14 1:32:22.424 PM WindowServer[654] WSMachineUsesNewStyleMirroring: true
8/20/14 1:32:22.425 PM WindowServer[654] Display 0x04280480: GL mask 0x1; bounds (0, 0)[1920 x 1080], 30 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a012, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a0120000000004280480
8/20/14 1:32:22.425 PM WindowServer[654] Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
8/20/14 1:32:22.425 PM WindowServer[654] Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
8/20/14 1:32:22.429 PM WindowServer[654] Created shield window 0x4 for display 0x04280480
8/20/14 1:32:22.429 PM WindowServer[654] Created shield window 0x5 for display 0x003f003e
8/20/14 1:32:22.429 PM WindowServer[654] Created shield window 0x6 for display 0x003f003d
8/20/14 1:32:22.431 PM WindowServer[654] Display 0x04280480: GL mask 0x1; bounds (0, 0)[1920 x 1080], 30 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a012, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a0120000000004280480
8/20/14 1:32:22.431 PM WindowServer[654] Display 0x003f003e: GL mask 0x4; bounds (2944, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
8/20/14 1:32:22.431 PM WindowServer[654] Display 0x003f003d: GL mask 0x2; bounds (2945, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
8/20/14 1:32:22.431 PM WindowServer[654] CGXPerformInitialDisplayConfiguration
8/20/14 1:32:22.431 PM WindowServer[654] Display 0x04280480: MappedDisplay Unit 0; Vendor 0x610 Model 0xa012 S/N 0 Dimensions 18.70 x 10.51; online enabled built-in, Bounds (0,0)[1920 x 1080], Rotation 0, Resolution 1
8/20/14 1:32:22.431 PM WindowServer[654] Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
8/20/14 1:32:22.431 PM WindowServer[654] Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2945,0)[1 x 1], Rotation 0, Resolution 1
8/20/14 1:32:22.522 PM WindowServer[654] GLCompositor: GL renderer id 0x01022647, GL mask 0x00000007, accelerator 0x00003fab, unit 0, caps QEX|QGL|MIPMAP, vram 512 MB
8/20/14 1:32:22.527 PM WindowServer[654] GLCompositor: GL renderer id 0x01022647, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
8/20/14 1:32:22.530 PM loginwindow[653] **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
8/20/14 1:32:22.557 PM WindowServer[654] Created shield window 0x7 for display 0x04280480
8/20/14 1:32:22.557 PM WindowServer[654] Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:32:22.609 PM launchctl[657] com.apple.findmymacmessenger: Already loaded
8/20/14 1:32:22.613 PM hidd[49] CGSShutdownServerConnections: Detaching application from window server
8/20/14 1:32:22.613 PM hidd[49] CGSDisplayServerShutdown: Detaching display subsystem from window server
8/20/14 1:32:22.621 PM com.apple.SecurityServer[15] Session 100012 created
8/20/14 1:32:22.622 PM loginwindow[653] Login Window Started Security Agent
8/20/14 1:32:22.666 PM com.apple.dock.extra[644] Our bootstrap port disappeared out from under us: 0x1507 { urefs = 32774, rights = 0x1507: dead name }
8/20/14 1:32:22.667 PM com.apple.dock.extra[644] Bug: 12F45: libxpc.dylib + 36100 [70BC645B-6952-3264-930C-C835010CCEF9]: 0x10000003
8/20/14 1:32:22.681 PM UserEventAgent[659] cannot find useragent 1102
8/20/14 1:32:22.686 PM com.apple.dock.extra[644] Check-in to the service com.apple.imagent.desktop.auth failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
8/20/14 1:32:22.693 PM SecurityAgent[665] MacBuddy was run = 0
8/20/14 1:32:22.695 PM com.apple.dock.extra[644] CGSGetNextEventRecord (Inline) connection 0xc917, 16384 bytes
8/20/14 1:32:22.695 PM com.apple.dock.extra[644] CGSShutdownServerConnections: Detaching application from window server
8/20/14 1:32:22.695 PM com.apple.dock.extra[644] CGSReleaseShmem : Cannot release shared memory
8/20/14 1:32:22.695 PM com.apple.dock.extra[644] CGSDisplayServerShutdown: Detaching display subsystem from window server
8/20/14 1:32:22.696 PM com.apple.dock.extra[644] Our bootstrap port disappeared out from under us: 0x1507 { urefs = 32774, rights = 0x1507: dead name }
8/20/14 1:32:22.696 PM com.apple.dock.extra[644] Bug: 12F45: libxpc.dylib + 36100 [70BC645B-6952-3264-930C-C835010CCEF9]: 0x10000003
8/20/14 1:32:22.696 PM com.apple.dock.extra[644] [Warning] Bad response from daemon for setup info
8/20/14 1:32:22.704 PM WindowServer[654] MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04280480 device: 0x106d8d110 isBackBuffered: 1 numComp: 3 numDisp: 3
8/20/14 1:32:24.429 PM WindowServer[654] **DMPROXY** (2) Found /System/Library/CoreServices/DMProxy'.
8/20/14 1:32:24.459 PM WindowServer[654] Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:32:24.500 PM WindowServer[654] Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:32:24.695 PM com.apple.dock.extra[644] Our bootstrap port disappeared out from under us: 0x1507 { urefs = 32774, rights = 0x1507: dead name }
8/20/14 1:32:24.696 PM com.apple.dock.extra[644] Bug: 12F45: libxpc.dylib + 36100 [70BC645B-6952-3264-930C-C835010CCEF9]: 0x10000003
8/20/14 1:32:24.696 PM com.apple.dock.extra[644] [Warning] Bad response from daemon for setup info
8/20/14 1:32:40.928 PM com.apple.launchd[1] (com.apple.dock.extra[644]) Exit timeout elapsed (20 seconds). Killing
8/20/14 1:32:40.928 PM coreservicesd[65] SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=202
8/20/14 1:33:35.215 PM SecurityAgent[665] User info context values set for jsuny
8/20/14 1:33:35.297 PM SecurityAgent[665] Login Window login proceeding
8/20/14 1:33:36.387 PM loginwindow[653] Login Window - Returned from Security Agent
8/20/14 1:33:36.000 PM kernel[0] Sandbox: kcm(695) deny mach-lookup com.apple.networkd
8/20/14 1:33:36.453 PM loginwindow[653] USER_PROCESS: 653 console
8/20/14 1:33:37.052 PM locationd[708] NOTICE,Location icon should now be in state 0
8/20/14 1:33:37.107 PM UserEventAgent[700] cannot find fw daemon port 1102
8/20/14 1:33:37.683 PM xpcd[611] MiniLauncher[711]: registration request failed: (0x12, 0xd) process failed sandbox check
8/20/14 1:33:37.907 PM WindowServer[654] **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
8/20/14 1:33:38.011 PM coreservicesd[65] SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=237
8/20/14 1:33:38.114 PM WindowServer[654] Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:33:38.395 PM imagent[737] [Warning] Setting up a new messages database.
8/20/14 1:33:38.428 PM NetworkBrowserAgent[747] Starting NetworkBrowserAgent
8/20/14 1:33:40.068 PM com.apple.time[700] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:33:40.069 PM com.apple.time[700] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:33:43.910 PM netbiosd[89] name servers down?
8/20/14 1:33:56.635 PM netbiosd[89] notify name "self.mdns.disconnection" has been registered 20 times - this may be a leak
8/20/14 1:33:56.639 PM netbiosd[89] notify name "self.mdns.disconnection" has been registered 40 times - this may be a leak
8/20/14 1:34:49.927 PM netbiosd[89] name servers down?
8/20/14 1:35:54.977 PM netbiosd[89] name servers down?
USER LOG:
8/20/14 1:31:03.956 PM com.apple.launchd.peruser.1467285364[536] (com.apple.gamed) Ignored this key: UserName
8/20/14 1:31:03.956 PM com.apple.launchd.peruser.1467285364[536] (com.apple.gamed) Ignored this key: GroupName
8/20/14 1:31:03.957 PM com.apple.launchd.peruser.1467285364[536] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
8/20/14 1:31:03.961 PM loginwindow[44] Connection with distnoted server was invalidated
8/20/14 1:31:04.013 PM distnoted[549] # distnote server agent absolute time: 799.097924175 civil time: Wed Aug 20 13:31:04 2014 pid: 549 uid: 1467285364 root: no
8/20/14 1:31:08.954 PM com.apple.launchd.peruser.1467285364[536] (com.apple.afpstat-qfa[588]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
8/20/14 1:31:08.955 PM com.apple.launchd.peruser.1467285364[536] (com.apple.afpstat-qfa[588]) Job failed to exec(3) for weird reason: 2
8/20/14 1:31:08.958 PM com.apple.launchd.peruser.1467285364[536] (com.google.keystone.user.agent[590]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
8/20/14 1:31:08.958 PM com.apple.launchd.peruser.1467285364[536] (com.google.keystone.user.agent[590]) Job failed to exec(3) for weird reason: 2
8/20/14 1:31:12.394 PM com.apple.launchd.peruser.1467285364[536] (com.apple.mrt.uiagent[578]) Exited with code: 255
8/20/14 1:31:15.132 PM SystemUIServer[557] Could not load menu extra NSBundle </System/Library/CoreServices/Menu Extras/User.menu> (loaded) for Class AppleUser
8/20/14 1:32:20.642 PM com.apple.launchd.peruser.1467285364[536] (com.apple.quicklook[626]) Exited: Killed: 9
8/20/14 1:32:20.647 PM com.apple.launchd.peruser.1467285364[536] (com.apple.mdworker.single.08000000-0000-0000-0000-000000000000[641]) Exited: Killed: 9
8/20/14 1:32:20.647 PM com.apple.launchd.peruser.1467285364[536] (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[635]) Exited: Killed: 9
8/20/14 1:32:20.783 PM Dock[556] could not open iterator, -43, for directory <ECDirectory: 0x7fd8ac846970> {path=/Users/jsuny/Documents/} (directory changed)
8/20/14 1:32:20.783 PM Dock[556] problem iterating directory, -43, for directory <ECDirectory: 0x7fd8ac846970> {path=/Users/jsuny/Documents/} (directory changed)
8/20/14 1:32:22.310 PM ARDAgent[574] HIToolbox: received notification of WindowServer event port death.
8/20/14 1:32:22.311 PM ARDAgent[574] port matched the WindowServer port created in BindCGSToRunLoop
8/20/14 1:32:22.694 PM com.apple.dock.extra[644] HIToolbox: received notification of WindowServer event port death.
8/20/14 1:32:22.694 PM com.apple.dock.extra[644] port matched the WindowServer port created in BindCGSToRunLoop
8/20/14 1:33:36.504 PM com.apple.launchd.peruser.1467285364[536] (com.apple.gamed) Ignored this key: UserName
8/20/14 1:33:36.504 PM com.apple.launchd.peruser.1467285364[536] (com.apple.gamed) Ignored this key: GroupName
8/20/14 1:33:36.505 PM com.apple.launchd.peruser.1467285364[536] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
8/20/14 1:33:36.517 PM loginwindow[653] Connection with distnoted server was invalidated
8/20/14 1:33:37.429 PM MiniLauncher[711] Skipping Setup Assistant for user 1467285364
8/20/14 1:33:37.464 PM transition[714] INFO: Not signed into MobileMe, nothing to do. Reason: 3
8/20/14 1:33:37.506 PM MiniLauncher[711] INFO: MMAccountMgr_Private: finishedSetup called.
8/20/14 1:33:38.180 PM com.apple.launchd.peruser.1467285364[536] (com.apple.afpstat-qfa[744]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
8/20/14 1:33:38.180 PM com.apple.launchd.peruser.1467285364[536] (com.apple.afpstat-qfa[744]) Job failed to exec(3) for weird reason: 2
8/20/14 1:33:38.489 PM CalendarAgent[741] Could not find Meta Data for persistent Store
8/20/14 1:33:38.877 PM fontd[716] FontWorker failed to return directory info (IPC failure?) for file://localhost/Users/jsuny/Library/Fonts/
8/20/14 1:34:48.723 PM migCacheCleanup[719] Cache cleanup: cleanup for user 1467285364 took 0.43 seconds
8/20/14 1:37:15.114 PM Dock[723] no information back from LS about running processCheck these out:
http://images.apple.com/server/macosx/docs/UserManagementv10.5.mnl.pdf
http://clc.its.psu.edu/Labs/Mac/Resources/blastimageconfig/
http://blog.macadmincorner.com/ -
Project Server 2010 - Updated User Profile - Display Name is Old Name
Similar to question"It shows the Domain\Logon account instead the User Name (up right corner)" but not quite the same. I also checked on the related topics list and could not find a solution.
We have a Resource in Project Server 2010 whose name changed. This included a change to her loginID as well as her email address. I went in to PWA > Server Settings > Security > Manage Users and changed the
Name, Email Address, and User Login Account fields accordingly. When the user goes into Project Server or any of the Project Sites, her old User Name is reflected. If she accesses any other SharePoint site (not associated with Project Server) her
new name shows up in the upper right hand corner of the screen.
We do not have AD Synchronization turned on.
How can we edit the name that appears in the upper right corner of the screen?Hi,
Use Display name shown on right hand site is not from PWA, its from SharePoint User profile. When we make change to user display name, sometime SharePoint Still retain the old account and also add new account. To fix the issue we have to remove the user
profile from PWA root site.
Open PWA and navigate to following path
Site Actions>>Site Settings>>People and Groups
Click on More from left hand site list of groups
Select appropriate group, belongs to the user
Select the user and from Actions tab remove the user. (you may see two entries old and new), Either you can delete both or click on each account to validate correct user ID.
Once again navigate to PWA>>Server Settings>>Manage User
Edit affected user and click on Save
Have user log on to PWA and validate the result.
Hrishi Deshpande – Senior Consultant DeltaBahn
Blog | < |
LinkedIn
Please click Mark As Answer; if a post solves your problem or Vote As Helpful; if a post has been useful to you.This can be beneficial to other community members reading the thread. -
How to add Hotmail account to ProfileManager User Profile?
Hi everyone!
I was wondering how I can add a Hotmail account to a user profile in Profile Manager? I only see POP/IMAP settings, but haven't been able to find those settings for Hotmail by googling.
Thanks!
~MikeYou can configure Hotmail to work on the iPhone. It works very well, I have had no problems with it. After upgrading to a Hotmail plus account, follow the instructions-
http://mailcall.spaces.live.com/Blog/cns!CC9301187A51FE33!44348.entry
Account: On
Account Information:
Name: John Smith (note: enter your own name)
Address: [email protected] (note: enter your full Hotmail email address)
Description: Hotmail
Incoming Mail Server:
Host Name: pop3.live.com
User Name: [email protected] (note: enter your full Hotmail email address)
Password: password (note: enter your Hotmail password)
Outgoing Mail Server (SMTP):
Host Name: smtp.live.com
User Name: [email protected] (note: enter your full Hotmail email address)
Password: password (note: enter your Hotmail password)
Advanced Settings:
Incoming Uses SSL: On
Outgoing Uses SSL: On
Authentication: Password
Delete from Server: When removed from Inbox (or your preferred option)
I paid the $20 for the Hotmail plus account and was receiving mail on my Iphone within a half hour. It Rocks. -
First time poster, but I think I've done my homework on this issue.
This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
However, it is definitely not the same issue (see further).
Current Config:
HP dv7-1450.
W7 RC 7100 x64
Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
Running with Admin account while diagnosing/troubleshooting.
Currently have two working accounts, one standard, one admin.
Symptom:
New user accounts cannot be logged into. On an attempted login to the new account, the following information is displayed on the login screen: "The User Profile Service service failed the logon. User profile cannot be loaded." Windows then logs off the operator and returns to the initial user selection screen. All other aspects of use are normal.
Current Diagnostics:
First attempts to resolve this problem were to recreate the new account. This was attempted when logged in as both Standard and Admin. This was also attempted under safe mode. This has been attempted with virus protection disabled. All to no difference in the symptom.
The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link). Unlike that issue, there simply is no entry for the new user. Examination of the new log entries from creation of account to attempted log in provides the following entries:
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Naturally I started with the earliest error first, and decided to look to see what is going on. The file that is trying to be copied is there, but the destination folder does not exist. As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation. Specifically I suspect it may not be able to create the appropriate folders before performing the copy. Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs. Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile). The following two (unhelpful to me) log entries were generated.
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The message id for the desired message could not be found
Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated. I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
There's the info. I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log. I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
Thanks in advance to responders!First time poster, but I think I've done my homework on this issue.
This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
However, it is definitely not the same issue (see further).
Current Config:
HP dv7-1450.
W7 RC 7100 x64
Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
Running with Admin account while diagnosing/troubleshooting.
Currently have two working accounts, one standard, one admin.
Symptom:
New user accounts cannot be logged into. On an attempted login to the new account, the following information is displayed on the login screen: "The User Profile Service service failed the logon. User profile cannot be loaded." Windows then logs off the operator and returns to the initial user selection screen. All other aspects of use are normal.
Current Diagnostics:
First attempts to resolve this problem were to recreate the new account. This was attempted when logged in as both Standard and Admin. This was also attempted under safe mode. This has been attempted with virus protection disabled. All to no difference in the symptom.
The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link). Unlike that issue, there simply is no entry for the new user. Examination of the new log entries from creation of account to attempted log in provides the following entries:
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Naturally I started with the earliest error first, and decided to look to see what is going on. The file that is trying to be copied is there, but the destination folder does not exist. As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation. Specifically I suspect it may not be able to create the appropriate folders before performing the copy. Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs. Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile). The following two (unhelpful to me) log entries were generated.
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The message id for the desired message could not be found
Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated. I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
There's the info. I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log. I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
Thanks in advance to responders!
To resolve this issue, I suggst you delete the file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm.Arthur Xie - MSFT -
Not able to import User Profile Property via BDC Connection
I want to fill some of the user profile properties via BDC Connection. I already have created more than 50 user profiles which I imported from AD. Now, in order to import profiles properties using BDC, I performed below steps:
a) Ensured Business Data Connectivity and Secure Store are running and used account has Full permission on these services.
b) Created an external content type using SharePoint Designer and created an external list to ensure that data is available:
Set email field as identifier, which is one of the columns in SQL table and is a primary key.
Created Read Item and Read List operations on above ECT.
c) Checked the presence of above ECT in BDC service and ensured it has all necessary permissions i.e. Edit, Execute etc.
d) Configure a new synchronization connection in User profile Service by selecting the same ECT. Here I chose to connect 1:1 mapping and picked up WorkEmail property to return items.
e) Mapped one of the custom property with one of the fields of SQL Server. Here, I ensured they both have same type.
f) Ran Full Synchronize after above steps. On checked, I do not find any data in the mapped properties.
Below are the traces of LOGS:
Profile sync step BusinessConnection (stage BusinessDataCatalogFullImport) finished successfully. 8ecffe9c-6d0a-e0e8-ec25-eb7a5f1c1215
04/21/2015 12:37:00.68 OWSTIMER.EXE (0x337C) 0x02DC SharePoint Portal Server User Profiles
ac4iu Medium Profile sync step BusinessConnection (stage BusinessDataCatalogFullSync) started execution.
04/21/2015 12:37:00.68 OWSTIMER.EXE (0x337C) 0x4CCC SharePoint Foundation Topology
8xqz Medium Updating SPPersistedObject UserProfileImportJob Name=UserProfileServiceApplication_ProfileImportJob. Version: 2294209 Ensure: False, HashCode: 36728399, Id: 4f037df6-d339-4b5a-8892-ef3699c16b20, Stack: at
Microsoft.SharePoint.Administration.SPJobDefinition.Update() at Microsoft.Office.Server.UserProfiles.UserProfileImportJob.SaveStatus() at Microsoft.Office.Server.UserProfiles.UserProfileImportJob.Execute()
at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState) at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService,
Int32& result) at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result) 8ecffe9c-6d0a-e0e8-ec25-eb7a5f1c1215
04/21/2015 12:37:01.70 OWSTIMER.EXE (0x337C) 0x4CCC SharePoint Portal Server User Profiles
ac4iq Medium Profile sync step BusinessConnection (stage BusinessDataCatalogFullSync) finished successfully. 8ecffe9c-6d0a-e0e8-ec25-eb7a5f1c1215
04/21/2015 12:37:01.70 OWSTIMER.EXE (0x337C) 0x4CCC SharePoint Foundation Topology
8xqz Medium Updating SPPersistedObject UserProfileImportJob Name=UserProfileServiceApplication_ProfileImportJob. Version: 2294211 Ensure: False, HashCode: 36728399, Id: 4f037df6-d339-4b5a-8892-ef3699c16b20, Stack: at
Microsoft.SharePoint.Administration.SPJobDefinition.Update() at Microsoft.Office.Server.UserProfiles.UserProfileImportJob.SaveStatus() at Microsoft.Office.Server.UserProfiles.UserProfileImportJob.Execute()
at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState) at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService,
Int32& result) at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result) 8ecffe9c-6d0a-e0e8-ec25-eb7a5f1c1215
04/21/2015 12:37:02.53 OWSTIMER.EXE (0x337C) 0x319C SharePoint Foundation Monitoring
nasq Medium Entering monitored scope (Timer Job job-upgrade-sites). Parent No 9f354308-7b18-40f3-80d6-c7d0616cd9e5
04/21/2015 12:37:02.53 OWSTIMER.EXE (0x337C) 0x319C SharePoint Foundation Logging
Correlation Data xmnv Medium Name=Timer Job job-upgrade-sites a0cffe9c-7d80-e0e8-ec25-e024bd692f28
04/21/2015 12:37:02.67 OWSTIMER.EXE (0x337C) 0x319C SharePoint Foundation Monitoring
b4ly Medium Leaving Monitored Scope (Timer Job job-upgrade-sites). Execution Time=136.402252241556 a0cffe9c-7d80-e0e8-ec25-e024bd692f28
04/21/2015 12:37:04.94 w3wp.exe (0x4440) 0x4070 SharePoint Portal Server Runtime
8gp7 Medium Topology cache updated. (AppDomain: /LM/W3SVC/1712947452/ROOT-1-130740700225995467)
04/21/2015 12:37:05.00 OWSTIMER.EXE (0x337C) 0x1FA0 SharePoint Foundation Monitoring
aeh57 Medium Sql Ring buffer status eventsPerSec = ,processingTime=0,totalEventsProcessed=0,eventCount=0,droppedCount=0,memoryUsed=0
04/21/2015 12:37:05.52 w3wp.exe (0x4440) 0x3DD8 SharePoint Foundation
Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://172.20.21.163:32843/af95f58c149b4b61b13c0d0250479beb/MetadataWebService.svc'
Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges2' MessageId: 'urn:uuid:324f52f2-8c3a-49e3-9d2c-6119776db97b' 08d6992a-9413-4d09-b8f9-bcfb08266cc7
04/21/2015 12:37:05.52 w3wp.exe (0x4848) 0x3D98 SharePoint Foundation
Monitoring nasq Medium Entering monitored scope (ExecuteWcfServerOperation). Parent No
04/21/2015 12:37:05.52 w3wp.exe (0x4848) 0x3D98 SharePoint Foundation
Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://ispantest.domainname.local:32843/af95f58c149b4b61b13c0d0250479beb/MetadataWebService.svc'
Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges2' MessageId: 'urn:uuid:324f52f2-8c3a-49e3-9d2c-6119776db97b' 08d6992a-9413-4d09-b8f9-bcfb08266cc7
04/21/2015 12:37:05.52 w3wp.exe (0x4848) 0x3D98 SharePoint Server
Taxonomy fuc5 Medium MetadataWebServiceApplication.GetChanges called on 'Managed Metadata Service' starting. 08d6992a-9413-4d09-b8f9-bcfb08266cc7
04/21/2015 12:37:05.53 w3wp.exe (0x4848) 0x3D98 SharePoint Server
Taxonomy fuc6 Medium MetadataWebServiceApplication.GetChanges called on 'Managed Metadata Service' completed. 08d6992a-9413-4d09-b8f9-bcfb08266cc7
04/21/2015 12:37:05.53 w3wp.exe (0x4848) 0x3D98 SharePoint Foundation
Monitoring b4ly Medium Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=2.03964470344695 08d6992a-9413-4d09-b8f9-bcfb08266cc7
04/21/2015 12:37:05.53 w3wp.exe (0x4440) 0x3DD8 SharePoint Foundation
General aipzw High An exception occurred while writing a service call usage
entry. Exception details: System.ObjectDisposedException: Safe handle has been closed at
System.Runtime.InteropServices.SafeHandle.DangerousAddRef(Boolean& success) at Microsoft.Win32.Win32Native.GetTokenInformation(SafeTokenHandle TokenHandle, UInt32 TokenInformationClass, SafeLocalAllocHandle TokenInformation,
UInt32 TokenInformationLength, UInt32& ReturnLength) at System.Security.Principal.WindowsIdentity.GetTokenInformation(SafeTokenHandle tokenHandle, TokenInformationClass tokenInformationClass) at System.Security.Principal.WindowsIdentity.get_User()
at System.Security.Principal.WindowsIdentity.GetName() at System.Security.Principal.WindowsIdentity.get_Name() at Microsoft.SharePoint.Utilities.SPUtili... 08d6992a-9413-4d09-b8f9-bcfb08266cc7Thanks for the very clear answer back. You're a star. Much appreciated and better to know where you stand directly. Have called the helpdesk and are willing to solve and take this one back in, although it will hurt. The macBook Pro continues to be out of reach economically, so it would need to be the white macBook...
Just wanted to check some last items before making final decisions as I am checking an alternative workaround
- my camcorder supports recording on memory stick which can then be read into iMovie without problem. Any idea if memory stick is lower in resolution as normal DV tape recording? If this is comparable I can choose to from now on switch to memory stick. When I record on the stick it is then recognised as MOV.
- is there any other (non apple made) OSX software on the market to facilitate only the USB driven capturing? Hence did any other SW supplier plug this hole? The old windows pc has proven that the camera streams images via the USB port (hence don't at all understand why iMovie cannot just support capturing via USB streaming...!!!!) and I understand it is more that iMovie doesn't support capturing images via USB, but does anybody else at least for the capturing bit?
- You read about Firewire - USB adapters/hubs/convertors. It is however never clear if it would solve this issue. Dead-end street or an option?
- I can capture my archive of old tapes on my old PC and then put them into my Mac. However the capturing SW makes one large file of it and no event is split. Any idea if on import iMovie could automatically split this into different events (based on date or start/stop?)
- final question: does iMovie when capturing video from tapebased camcorder automatically split events based on date or start/stop? Would be silly to make switch and then still find out I need to manually make the cuts.
Very grateful for your support. Just a couple of days left to make final decision...
Maybe you are looking for
-
I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how. I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click. Help?
-
Finder wont open, desktop empty, itunes wont close
Hi all, I'm having troubles with Finder after istalling a program allowing to pull off music from my ipod. Suddenly error 14..something came up saying my system had been compromised. Since then I can't open my Finder, desktop is empty, itunes doesn't
-
DBConnect Error while installing SAP ABAP Engine DBInstance
My environment is as follows Windows 2003 (SP1) Server SQL Server 2000 (SP3 + hotfix + unicodecp850bin2) SAP XI 3.0 Installation Central Instance Installation was successful and trying to install DB Instance but somehow all scripts throwing same erro
-
CS5.5 component upgrade problems
I installed Master Suite CS5.5 a couple of weeks ago, and all programs I opened worked fine. The one thing I used immediately was Acrobat X Pro to edit .pdf forms and save them. Thnking it would be a good thing, In Acrobat X Pro, I used the "Check
-
Control panel does not show the home page when Newsstand app is open - could this be a bug?
When Newsstand is open and I press the home button twice to access the control panel, the home screen is replaced by the Newsstand app. Is anyone else having this issue? Is there a fix?