LDAP works for some but not all

I have CPS set up, and it's been working for years, all of a
sudden all of my users at one location cannot authenticate. The CSI
file is fine, but it's had to be replaced a few times. The users
LDAP settings haven't changed.
The server is at siteA and all siteA users are fine. SiteB
users cannot authenticate to contribute, but they can log into VPN
and choose a VPN connection at siteA and they work just fine.
The Access Denied message is coming from CPS, and is not NTFS
or other security.
We've deleted an affected user and recreated the account in
CPS and still no luck.
Anyone Seen this issue before?

Problem resolved. After a few conversations with different
teams, we found a change that went in at the time this started and
investigated what that change was.
There is a new Wan optimization appliance that started being
used between site A and site B which apparently caused my problem.
Once my connections where excluded from this appliance, everything
started working again as normal.
Just in time, I was planning to tear down and completely
rebuild my server today.

Similar Messages

Email Alerts are working for some but not all users

If some users are getting the alerts and some not, it seems more likely that the issue is with your email server or email clients, not with your SW setup.
Have you checked SPAM / Junk folders on the server and on the clients?

We have alerts setup for multiple scenarios. All of our users are setup the same but not everyone is getting the alert. We are using the spiceworks mail servers and I have checked the Spiceworks App Notifications are set to Yes. Any ideas?
This topic first appeared in the Spiceworks Community

Album Art works for most, but not all

I was reading previous forums on the subject, but no clear answer was given..
The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
So I ended searching this forum for related problems...
And decided to join my problem to this entry.

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn

I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

Quicktime working for some but not for others

Hello all,
I'm developing this website and it displays videos in quicktime format, but it's just not working for some people... It just won't play for some reason I just don't know 'cause I couldn't make the error happen to me and got no good help from others...
This is what's happening: @ www.thebrooklynbrothers.com/ clicking on "work, work and more work", then clicking on MEDIA and then FILM, it should display the QT movie and the user could play it, but for some reason it just shows up the QT logo and nothing more, as some people are telling me... could somebody check this out to see if it happens to you as well and tell me what could be the problem or any other details of the error so I can figure out what it is?
if you want to check a sample URL it loads from there, check this one: http://www.thebrooklynbrothers.com/new/portfolio/contentloader.php?file=cnneraq.mov&filetype=2
Thanks you so much for your time! ANY help would be greatly appreciated! I'm desperate right now!

I'm having a similar problem with videos uploaded onto my website. It all plays fine through Firefox and Internet Explorer on my other PC, but on this one (Win XP), I just get a blank page after it's finished loading. No video box or error mesage. Just lots of white space. I've checked all my settings, and have QT as my default player, but still nothing. Have also downloaded the latest QT updates. Is there something I'm missing in Windows or Internet Explorer? I don't have any problems with it on my Mac.
Thanks,
Lucy

IMAP Working for some but not others

I am having the issue of imap working for some users and not others. I have for instance 2 users both accounts the same. One account I can link via imap the other I can not. Both have the same group memberships, both are in the same post office. Everyone has imap access I have no restictrions set. Any idea where I should begin to look. The message I am receiving on the account the can get in is: user does not exist.
Thanks

gator17,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred - any ideas?

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred and available - any ideas?

Rodger,
Thank you for your gracious welcome . . .
and thank you for your swift response . . .
and thank you for your information (and encouragement!).
Yes, I read that too, but searched in vain for the specifity of, say, your direction:
"Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
So I shall!
Again, many thanks.

I installed Nik:s suite of plug-ins for LR5 but for some reason not all of them were installed. In the end I uninstalled all of the Nik programs from my Mac but before I reinstalled them I opened LR5 again to check. Under "photo" and "edit in" the plug-in

I installed Nik:s suite of plug-ins for LR5 but for some reason not all of them were installed. In the end I uninstalled all of the Nik programs from my Mac but before I reinstalled them I opened LR5 again to check. Under "photo" and "edit in" the plug-ins were still presented but no programs opened, of course. after reinstalling the plug-ins one of the programs appeared twice in the list but not the others. I´m going to reinstall them again and I´m wondering if there is anyway of erasing the links to the plug-ins under "photo" and "edit in" ???

Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia

Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
- Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
this, after normal behavior for more than a year since purchase of the iPod.
- Different podcasts have been affected at different times, after changes in the state of the iPod.
- Only podcasts are affected.
- This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
- The only change to iTunes, the Mac, or the iPod is that just before this condition began
I’d begun syncing an iPhone via iTunes.
I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
As I said, this involves only podcasts. All other content on the iPod does appear in iTunes.

I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
Need Help!!!

Printer just started feeding a blank page after some, but not all printed documents

Printer just started feeding a blank page after some, but not all printed documents

Hi @cam21 ,
I understand that you are having issues printing, after some documents you are getting blank pages. I would be happy to help you.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
What application are you printing from?
It may be a setting in the application.
Does this happen from all applications?
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
How is the printer connected? (USB/Ethernet/Wireless)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

TS1424 Some but not all of my purchases from iTunes store (TV shows) have been downloading in a Quicktime format that can't be viewed via iTunes or on apple TV (1st gen). I get error message when I try to convert.

Since I have a new iMac and now use Mountain Lion, I am observing that TV shows purchased in iTunes sometimes download in a Quicktime format that will not open in iTunes. In some but not all cases, I right click "open in" and select iTunes and then it will play. However, this doesn't always work. When I open in Quicktime and try to export to iTunes, that won't work. When I try Wundershare's Video conversation program, it won't even accept the file. What's going on here? Any ideas? Please reply [email protected] with any suggestions.
Kathy

Thanks for the help Ricky.
I did put my iPod into DFU and iTunes recognized it in restore mode. After restore I am back where I was before - iTunes cannot connect because of an unknown error.
I have installed Jailbreak to see if I can bypass itunes but haven't succeeded. I can't get my computer to recopgnize the iPod as a device.
I'll take it to a Genius bar next time I am in the area of one. Until then I'll probably continue to try hacks to get it connected.
Dan

Finder shows some but not all files in a folder

In some circumstances, Finder only shows some (but not all) of the files in a folder. Why?
I notice this with Excel autosave files in the Office 2011 Autorecovery folder (Macintosh HD ▸ Users ▸ Conor ▸ Library ▸ Application Support ▸ Microsoft ▸ Office ▸ Office 2011 AutoRecovery). In my case, Finder shows 34 files but "ls" in a Terminal window reports 40 files. The missing files do not start with a period (.) and have the same permissions as other files that show in Finder (-rw-r--r--@ 1 <myname> staff). Here's the last four lines of "ls -al" - the first two appear in Finder, but not the last two:
-rw-r--r--@ 1 myname staff    55296 8 Oct 2013 Word Work File D_1239425731.tmp
-rw-r--r--@ 1 myname staff    55296 8 Oct 2013 Word Work File D_1240072173.tmp
-rw-r--r--@ 1 myname staff    52796 13 Feb 11:08 safe1.xlk
-rw-r--r--@ 1 myname staff    95320 12 Mar 16:06 safe2.xlk
I have tried copying files from this folder to another folder, and/or changing their names. They still do not appear in Finder, nor are they visible in the File Open dialog of applications, even when the dialog is listing other files in that directory - but if I manually type the name into the File Open dialog, the app manages to find and open the file.
If I Spotlight-search for the file name, or search in Finder, without specifying that specific directory ("This Mac"), the file is not found, but if I direct the Finder search at that particular directory, then the search returns the relevant files.
So: why does Finder hide certain files when showing a folder, even though it can find and show those files if you specifically ask for them?
Now using OSX 10.10 (Yosemite), but I'm pretty sure I noticed this on OSX 10.8 as well.

So simple - thanks. I'd not been aware of the hidden flag, and now I've found the -O option on ls to display it.
Follow-on question: I now see that you can change the system-wide defaults to display hidden files with this...
     defaults write com.apple.finder AppleShowAllFiles -boolean true ; killall Finder
...but is there a way to specify this on a per folder basis? I'm happy enough to hide hidden files in general, but it would be nice if I could set an attribute/flag/whatever on the Office AutoRecovery directory that told Finder "in this folder, always display hidden files". Can I do this?

My sound works for music but not apps

My sound works for music but not apps

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

I have tried to sync my Iphone with my current Itunes and for some reason not all of my music is transferring to my Iphone. Some songs that were on my phone previously, are now not transferring. Any ideas?

I have downloaded all of the recent upgrades for both Itunes and Iphone. Now for some reason, not all of my songs in my playlists are transferring when I sync. Previously I have had the songs in the playlists on my phone, but now some of them are not there although they are listed and show in Itunes. Any ideas?

iTunes will only copy back iTunes purchased music. If you don't still have a copy of the music that you copied from CDs or bought from other stores anywhere (e.g. on another computer or on your backup of your library) then there are some third-party programs listed half-way this page which should be able to copy them back : Recover your iTunes library from your iPod or iOS device.

Aperture has stopped showing some, but not all, keywords on photos

I imported some new photos today and noticed that Aperture seems to have stopped displaying some, but not all, of my keywords. I'm noticing this on a large number of my existing photos.
For example, I've selected a photo and the Keywords tab of the Metadata pane lists: Amanda, iPhoto Original, Judy, and Zoo. That appears to be correct. However, the Keywords field in the top of the Metadata pane only shows iPhoto Original, and the only keyword displayed in the grid view is iPhoto Original.
Switching to a different metadata display does not help, nor does rebuilding the library. Reassigning the keywords seems to help, but that's not really an option for > 7,000 photos.
Anyone know why this is happening? Can I fix this?
Dave
PowerMac Dual G5 2.0 Mac OS X (10.4.7) Aperture 1.1.2

After poking around with BBEdit in my Aperture library, I think I see the problem. I chose a photo that Aperture won't display all the keywords and re-added them. I then compared all the files in the library for that photo with the same files in a backup library I had set aside.
It appears that at some point Aperture got the IPTC keywords out of sync with the actual keywords on the photos. Looking at the Version-1.apversion file (which is actually a .plist file), I can see that both copies have the same keywords on them (called tags in the plist), but the IPTCProperties.keywords summary does not reflect all the tags actually on the photo. Aperture appears to just display the keywords stored in the IPTC keyword summary instead of checking to see what keywords the photo actually has.
So, the keywords are still there, but the summary that Aperture displays is wrong and a library rebuild doesn't appear to rebuild the keyword summary.
My options at this point appear to be either re-apply all my keywords or write a tool to fix it for me (I guess being a developer has it's perks). I'll definitely be filing a bug on this...

LDAP works for some but not all

Similar Messages

Maybe you are looking for