Ldm migrate fails with : "Set PM policy to performance"

Hi
after "panicing" 1 primary domain I'm trying to migrate one of its guest domain to another primary domain.
this procedure have been tested before and worked many times.
now when I try to migrate its says :
Migration is disabled because Power Management is active
Set PM policy to performance to enable migration
although when I check in the SP it is on performance like this:
-> ls /SP/powermgmt
/SP/powermgmt
Targets:
Properties:
actual_power = 337
policy = performance
Commands:
cd
set
show
( on both the source and the target machines the policy is performance )
I even tried to powercycle the 2 machines and it didn't changed anything.
I use LDom Manager 1.3 , firmware 7.2.7
I noticed there is a new firmware 7.2.8 released 02 Apr 2010, maybe an upgrade will solve it?
any other idea?
Thanks in advance,
Ori

Hi Andreas,
Thanks for your feedback.
I will test and reproduce your issue on my side. Any information, I will post back for you.
Thanks for your understanding.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Migration/Live Migration fails with shared storage (SMB), but not all the time

I have 2 Hyper-V Hosts using shared storage via SMB. I'm having intermittent issues with migrations failing. It'll either go through the motions of doing the whole move and fail and/or when I try to start it again I get the following:
I've done a lot of reading on this and have done various things that have been recommended. For each Hyper-V host I've setup delagation via Kerberos. ie. HV_Host1 has CIFS - HV_Host2; CIFS - SMB Server; MS Virtual System Migration Service - HV_Host2 and
vice versa.
On the actual SMB share on the Shared Storage server I added permissions to the folder for HV_Host1, HV_Host2, Storage Server, Domain Admins and my user account for full access.
In Group Policy, I've blocked Inheritance for the OU containing the Hyper-V hosts, though I have added some of the Group Policy's manually that I needed.
Last thing, I also added Domain Admins to the Local GP on each Host for "Log on as a Service" and "Impersonate a client after authentication" as shown in this thread: http://social.technet.microsoft.com/forums/windowsserver/en-US/7e6b9b1b-e5b1-4e9e-a1f3-2ce72ea1e543/unable-to-migrate-create-vm-hyperv-cluster-2012-logon-failure-have-to-restart-the-hyperv
I get these failed migrations regardless if I start them on the actual Host or via the admin console from Win8.
At this point I'm not sure what else to check or the next step to take for this.

Hi Granite,
Please refer to following article to build hyper-v over SMB :
http://technet.microsoft.com/en-us/library/jj134187.aspx#BKMK_Step3
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Server 2012 r2 live migration fails with hardware error

Hello all, we just upgraded one of our hyper v hosts from server 2012 to server 2012 r2; previously we had live replication setup between it and another box on the network which was also running server 2012. After installing server 2012 r2 when a live migration
is attempted we get the message:
"The virtual machine cannot be moved to the destination computer. The hardware on the destination computer is not compatible with the hardware requirements of this virtual machine. Virtual machine migration failed at migration source."
The servers in question are both dell, currently we have a poweredge r910 running server 2012 and a poweredge r900 running server 2012 r2. The section under processor for "migrate to a physical computer using a different processor" is already checked
and this same vm was successfully being live replicated before the upgrade to server 2012 r2. What would have changed around hardware requirements?
We are migrating from server 2012 on the poweredge r910 to server 2012 r2 on the poweredge r900. Also When I say this was an upgrade, we did a full re install and wiped out the installation of server 2012 and installed server 2012 r2, this was not an upgrade
installation.

The only cause I’ve seen so far is virtual switches being named differently. I do remember that one of our VMs didn’t move, but we simply bypassed this problem, using one-time backup (VeeamZIP, more specifically).
If it’s one-time operation you can use the same procedure for the VMs in question -> backup and restore them at new server.
Kind regards, Leonardo.

Transport request migration failed with return code 12

Hi ,
A transport request was created to capture deletion of bex query via Tcode RSZDELETE. The deletion TR was moved to Quality box successfully and query got deleted. But when same TR was moved to Production box, TR failed with return code 12. Program terminated (job:RDDEXECL). Upon checking the job log overview for this job, runtime error ITAB_DUPLICATE_KEY happend causing session to terminate. can anyone pls suggest me how to fix this issue and why this has caused. Need to fix this immediately as it is in production environment. Please help.
In ST22 i could see the below error details:
Thanks,
Vishnu

as per the dump, system is trying to insert a unique number which is already in the system. You sure the transport is only for deletion of the query? Can you please check the import logs in the test system and should tell you what action performed during import.

Live Migration Fails with error Synthetic FiberChannel Port: Failed to finish reserving resources on an VM using Windows Server 2012 R2 Hyper-V

Hi, I'm currently experiencing a problem with some VMs in a Hyper-V 2012 R2 failover cluster using Fiber Channel adapters with Virtual SAN configured on the hyper-v hosts.
I have read several articles about this issues like this ones:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/baca348d-fb57-4d8f-978b-f1e7282f89a1/synthetic-fibrechannel-port-failed-to-start-reserving-resources-with-error-insufficient-system?forum=winserverhyperv
http://social.technet.microsoft.com/wiki/contents/articles/18698.hyper-v-virtual-fibre-channel-troubleshooting-guide.aspx
But haven't been able to fix my issue.
The Virtual SAN is configured on every hyper-v host node in the cluster. And every VM has 2 fiber channel adapters configured.
All the World Wide Names are configured both on the FC Switch as well as the FC SAN.
All the drivers for the FC Adapter in the Hyper-V Hosts have been updated to their latest versions.
The strange thing is that the issue is not affecting all of the VMs, some of the VMs with FC adapters configured are live migrating just fine, others are getting this error.
Quick migration works without problems.
We even tried removing and creating new FC Adapters on a VM with problems, we had to configure the switch and SAN with the new WWN names and all, but ended up having the same problem.
At first we thought is was related to the hosts, but since some VMs do work live migrating with FC adapters we tried migrating them on every host, everything worked well.
My guess is that it has to be something related to the VMs itself but I haven't been able to figure out what is it.
Any ideas on how to solve this is deeply appreciated.
Thank you!
Eduardo Rojas

Hi Eduardo,
How are things going ?
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCVMM 2012 R2 RU3 - Live storage migration failing with error 12711 if cluster resource name is not in form of "SCVMM vmname "

At the end of live storage migration in SCVMM 2012 R2 RU3 getting error:
Error (12711)
VMM cannot complete the WMI operation on the server (hypervhost1.domain.local) because of an error: [MSCluster_Resource.Name="SCVMM test-vm"] The cluster resource could not be found.
The cluster resource could not be found (0x138F)
Recommended Action
Resolve the issue and then try the operation again.
Storage migration actually succeeds and after Repair/Ignore and Refresh, the VM shows up ok in VMM, with the VHD in new location.
If VM is offline, storage migration always succeeds. Live (non-storage) migration always succeeds.
I noticed in the error message that it searches for cluster resource name "SCVMM test-vm" and for some VMs I've got different cluster resource names.
Like for this VM cluster resource names are:
Virtual Machine test-vm
Virtual Machine Configuration test-vm
Furthermore, those resource names are showing up correctly in [VirtualManagerDB].[dbo].[tbl_WLC_VMInstance] table, columns VMResource and VMConfigResource.
Anyone knows why SCVMM keeps searching for "SCVMM test-vm" and how to fix this without recreating cluster resources?

Ok, you have the same problem and same configuration that this post:
https://social.technet.microsoft.com/Forums/systemcenter/en-US/853c021f-dd0a-4d88-a7c1-72bb8d4d0591/hyperv-cluster-live-migration-does-not-work-anymore-after-ur5-installation?forum=virtualmachingmgrhyperv#b5ae914f-7b52-4cea-86ef-a64ce4b32bb0
This problem occurs will old and new vm?

Collection Migration fails

We are trying SCCM migration from CM7 to CM2012 first on a test environment before moving to production. Many collection migrations fail with
Entity ABCD with path SMS_Collection.xxxxxxxxxxxx failed with Invalid Query for collection rule Query
I can see some Attribute classes have not been migrated , that is why the collection can't migrate with those queries and it fails. How to correct it ? The closest to this problem/solution was in an earlier thread here "Migrating Collections
fails" . WE have the AD Forest Discovery turned on and the SCCM servers have been discovered. So, the solution in that thread has not worked. Any ideas ?
cheers
Vij

Thanks for the reply Peter.
The colelction won't be migrated at al if it is a mixed one; so I am not bothered about it.
Yes, we have extended hardware inventory in CM2007. I thought it is automatically migrated during SCCM Migration tool.
I can see some Attributes on which the queries are based is not migrated, that is why the collection migration fails. So, how do we create extended hardware inventory in SCCM 2012, the best solution would be to migrate that also from CM 2007. Someone was
saying , create a client first, then inventorying that would pull in extra hardware attribute classes. I don't know if it would work or not; but that would defeat the purpose of during migrations first before going for clients.

Migrate Roles failes when migrating VMs with legacy network adapters (2008R2 - 2012)

I'm working on a upgrade of Hyper-V 2008R2 cluster to Hyper-V 2012 cluster. I am using the "migrate roles" feature of failover clustering to migrate the CSV's and VM's. The wizard ask to which switch the VMs need to be connected on the target cluster.
All VMs with network adapters can be started in the new cluster without any issues. If you look at the XML file of the migrated VMs with normal network adapters, a new XML has been generated in the proper 2012 format. However, all VM's with a legacy
network adapter fail to start. Also there is no migrated XML file in the VM directory. It is impossible to check or adjust the settings of the migrated VMs with legacy network adapters using the failover clustering console.
I have reproduced the issue in my lab several times, and it seems like a bug.
There are several workarounds, but I am looking for a real solution.

Hi,
We recommend that you use the legacy network adapter only to perform a network-based installation or when the guest operating system does not support the network adapter.
If the virtual machine continues to use the legacy network adapter it will not be able to leverage many of the features available in the Hyper-V virtual switch. You may want
to replace the legacy network adapter after the operating system is installed.
The related KB:
Building Your Cloud Infrastructure: Converged Data Center without Dedicated Storage Nodes
http://technet.microsoft.com/en-us/library/hh831829.aspx
Configure Networking
http://technet.microsoft.com/en-us/library/cc770380.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

Do browser send a error report to the website if browser fail in set up communication channel first time with that site

Suppose i want to open some site using mozilla but first time browser fail to set up communication channel. When I attempt second time it successfully set up a connection then my question is that on the second time will browser send error report of first time to that site

What was the specific problem with the first request? For example:
* The server reset the connection
* Page didn't load (blank)
* Security certificate error
* et cetera
In some of these cases, the destination server might not know you sent a first request. And in other cases, that will be in the log. But I do not think Firefox sends any notification of problems with previous connections, the site would have to make an educated guess about the problem based on getting two sequential requests from the same IP address.

Set-AzureServiceDiagnosticsExtension or publishing with diagnostitcs enabled fails with Azure SDK2.5 for existing Azure services

Similar to https://social.technet.microsoft.com/Forums/systemcenter/en-US/487234f4-9748-4f49-ab7b-ce523da4c500/publish-cloud-service-fails-from-visual-studio-2013-update-4-published-asset-entry-for-image but since the given answer provides no solution
and I found more details, I felt that opening this new question providing more details was necessary.
I have an existing Azure service with two web roles (service and worker) published first in May 2012. Recently I tried to update from SDK2.2 to SDK2.5 and Visual Studio 2013 Update 2 to Update 4. The main reason behind this was to move from log4net to WAD
and in doing so, of course directly move to the new diagnostics version. So before publishing I enabled WAD diagnostics logging in the properties of both roles.
Trying to publish from Visual Studio to the exisiting Azure Service fails, VS output shows the following lines:
11:45:24 - Checking for Remote Desktop certificate...
11:45:25 - Applying Diagnostics extension.
11:45:45 - Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
What's working 1: For testing purposes, I have created a new Azure service in the Azure portal.
Publishing the same solution from the same development environment to this new service is possible without problems - the service with WAD diagnostics logging is working fine. Unfortunately this is no solution to my production service, with
DNS alias and SSL certificates bound to the existing Azure service.
What's working 2: Publishing the solution to the existing Azure service WITHOUT diagnositics enabled works.
Problem with that: Trying to activate WAD diagnostics logging after publishing using the Azure cmdlets also fails WiTH a similar error message. Following http://blogs.msdn.com/b/kwill/archive/2014/12/02/windows-azure-diagnostics-upgrading-from-azure-sdk-2-4-to-azure-sdk-2-5.aspx I
tried:
PS C:\> Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -DiagnosticsConfigurationPath $public_config -ServiceName $service_name -Slot 'Staging' -Role $role_name
VERBOSE: Setting PaaSDiagnostics configuration for MyWebRole.
Set-AzureServiceDiagnosticsExtension : BadRequest : Published Asset Entry for Image
Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
At line:1 char:1
+ Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -Diagnostic ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Set-AzureServiceDiagnosticsExtension], CloudException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.CloudException,Microsoft.WindowsAzure.Commands.ServiceManagement.
Extensions.SetAzureServiceDiagnosticsExtensionCommand
The problem seems to be related to those service configuration parts in the cloud which are not replaced by a new deployment, so I compared both services using Azure cmdlet Get-AzureService.
I found that the new service has properties which the old one is missing:
ExtendedProperties : {[ResourceGroup, myazureservice], [ResourceLocation, North Europe]}
Is this a hint? Reinstalling or repairing Visual Studio is not the answer to this problem!!!
What's the meaning of "Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml"?
[Perhaps MS will publish a newer version of its Azure cmdlets, but that's not today's story]
So what are possible reasons or fixes for this behaviour? Going back to log4net is not my favorite. Even worse, while there are alternative logging solution,
I currently have no performance counter monitoring in the Azure portal (Remote desktop and perfmon is NO solution). Is there any alternative to going back to SDK2.4?
Best regards,
Andreas

Hi Andreas,
Thanks for your feedback.
I will test and reproduce your issue on my side. Any information, I will post back for you.
Thanks for your understanding.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

SQL 2012 install fails with 'Object reference not set to an instance of an object.'

Hi, I'm trying to install SQL 2012 RTM Enterprise on a Windows 2008 R2 single node cluster.
The installer starts goes through some checks and then fails with the message 'Object reference not set to an instance of an object.' It happens while the small 'wait while...' dialog box is
showing, another window pops up briefly (I think the feature selection window - can't really tell as it doesn't draw before disappearing). Then the ‘Object reference not set’ message comes up.
From the summary log file..
Overall summary:
Final result:
Failed: see details below
Exit code (Decimal):
-2147467261
Exit facility code:
0
Exit error code:
16387
Exit message:
Object reference not set to an instance of an object.
Start time:
2012-09-26 08:52:53
End time:
2012-09-26 08:54:08
Requested action:
InstallFailoverCluster
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x9AF1AE5E%400x44A889F9&EvtType=0x9AF1AE5E%400x44A889F9
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.NullReferenceException
Message:
Object reference not set to an instance of an object.
Data:
HelpLink.EvtType = 0x9AF1AE5E@0x44A889F9
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.ShouldRuleRun(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.IsRuleSkipped(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRule(String ruleId, List`1 ruleProperties, XmlSchema ruleSchema, XmlElementParserFactory elementParser)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRules(IEnumerable`1 ruleIds)
at Microsoft.SqlServer.Configuration.InstallWizard.RunRuleProgressController.Initialize()
I have rebooted, tried different media, tried uninstalling the setup files and rerunning but always get the same result.
Any help would be gratefully accepted.
Thanks,
Bruce.

Hi Alberto,
Whenever I am trying to install SQL 2012 with SP1 clustering, I am getting below error. Can you please advise on this.
Additional information are
Windows Servers Version and Edition - Windows 2012 Strandedition
SQL Server Version and Edition - SQL 2012 with SP1
All the machines are running on Hyper-V and Passed the cluster validation test successfully. there is no issue. The servers' (Nodes) names are;
DomainServerName - ACONDomainGroup (1gb ram allocated)
Node1 - AconNODE1W2K12STD (2.5gb ram allocated )
Node2 - AconNODE2W2K12STD (1.5 ram allocated allocated)
WindowsClusterName - AconWinCLTR
Below is Summary.txt Error
Update Source: MU
User Input Settings:
ACTION: InstallFailoverCluster
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
ENU: true
ERRORREPORTING: false
FAILOVERCLUSTERDISKS: <empty>
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERIPADDRESSES: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
FEATURES:
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
PID: *****
QUIET: false
QUIETSIMPLE: false
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140420_052344\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140420_052344\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.NullReferenceException
Message:
Object reference not set to an instance of an object.
HResult : 0x80004003
Data:
HelpLink.EvtType = 0x9AF1AE5E@0x44A889F9
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.ShouldRuleRun(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.IsRuleSkipped(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRule(String ruleId, List`1 ruleProperties, XmlSchema ruleSchema, XmlElementParserFactory elementParser)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRules(IEnumerable`1 ruleIds)
at Microsoft.SqlServer.Configuration.InstallWizard.RunRuleProgressController.Initialize()

Migration Request getting failed with error code 152

Hi Experts,
We are creating a migration request for moving a transport along the path Development-Quality-Production ( tcode /POWERCOR/MRCRE ). But the import into Quality is getting failed with return code 152 and status code E. While the transports without creating the migration request are normal. Please let us know how we can resolve this issue.
Thanks in advance.
Regards,
Surendra Julury,
+91 9611107275

Try running the exe remotely on a computer using PSExec under the system context. What happens?
See here for PSExec - you need the -s switch for local system
http://technet.microsoft.com/en-ie/sysinternals/bb897553.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
If you do this then you will know. This mimics the behaviour of the ConfigMgr deployment. Use the same .exe -silent etc.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

CSSCAN for database character set conversion failing with ORA-01578

Hi ,
CSSCAN for database character set conversion failing with ORA-01578: ORACLE data block corrupted (file # 84, block # 23930). please help me out in this regard.
Thanks,
Sravan.

Hi Anand,
Thanks for your update. The segment is a table not an index in my case. And i got this error while running CSSCAN on Apps database for character set conversion to UTF8 from WE8ISO8859P1. Please find the snapshot below for your reference.
SQL> select segment_name, segment_type, owner from dba_extents where file_id = 84 and 23930 between block_id and block_id + blocks - 1;
SEGMENT_NAME
SEGMENT_TYPE OWNER
EDW_LOOKUP_M
TABLE POA
SQL> ANALYZE TABLE POA.EDW_LOOKUP_M VALIDATE STRUCTURE CASCADE;
ANALYZE TABLE POA.EDW_LOOKUP_M VALIDATE STRUCTURE CASCADE
ERROR at line 1:
ORA-01578: ORACLE data block corrupted (file # 84, block # 23930)
ORA-01110: data file 84: '/d911/oracle/dbcondata/poad01.dbf'
Thanks,
Sravan.

Ldm migrate fails with : "Set PM policy to performance"

Similar Messages

Maybe you are looking for