LDOM 1.1 and split I/O domains

Anyone tried out LDOMs 1.1 yet? Looks like it went GA on December 23th or there about...
We're setting up a test platform for it. We particularly interested in running it in split PCI switch mode and the disk fail-over between I/O domains that it should permit. We're also glad to see it finally adds dynamic add/removes of disk (VIODR). I'd love to hear others experiences with it, especially in relationship to EMC Clariion storage.
I must say that I'm just a bit frustrated at the architecture of the current crop of T5x40 systems -- it seems there was little or no thought given to using the split PCI switch configuration to permit I/O domain redundancy. All the local disks reside on one switch and all the built-in network resides on the other. To get two functional I/O domains we'll need to boot one (or both) off the SAN and add a network card (burning up one of the PCI slots which are at a premium in the smaller form factor T5140). And with an add-on card we cannot get the Hybrid I/O for both network ports (only works with the built in Neptune chip).
What we're hoping to achieve is a system that can take down the Control/IO domain and the secondary IO domain indepedently for patching (required by policy to be pretty frequent) without having to take an outage on all the guests...maybe it's just a pipe dream.
Cheers!

LDoms has been released, see http://blogs.sun.com/achartre/ for more info. You will also find
information about virtual disk multipathing through multiple I/O domains.

Similar Messages

Cross-tenant email and split domains - how to set up?

I've successfully deployed exchange 2010 sp1 in /hosted mode with multi-tenancy and the install is working great. We are running into a problem configuring the send connectors
for inter domain email and split domains. We have several customers wanting to only put a couple of email accounts on the exchange server and have the rest of their email accounts resolve to a pop server at an external location. Currently I have a internal
send connector set to relay email between the domains on the server so they can send emails to one another. Directions for this were found at: http://www.zerohoursleep.com/2010/10/step-by-step-starting-with-exchange-2010-sp1-multi-tenant-sending-and-receiving-emails/
I created the connector: new-SendConnector -Name 'TestOrg' -Usage 'Internal' -AddressSpaces 'SMTP:domain1.com;1','SMTP:domain2.com;1' -IsScopedConnector $false -DNSRoutingEnabled $false -SmartHosts '[127.0.0.1]' -SmartHostAuthMechanism 'None' -UseExternalDNSServersEnabled
$false -SourceTransportServers 'Exchange'
I added all my internal domains to the connector listed above and email is able to flow from one domain to another.
My problem is we have a number of customers who need split-domains set up where users who arent on the exchange server are relayed to an external server. Example to route unknown users on a domain to google my send connector looks as is:
New-SendConnector -Name "Internal Relay - domain1.com" -Custom -AddressSpaces "SMTP:domain1.com;5" -SmartHosts aspmx.l.google.com -SourceTransportServers "server"
This results in an internal loop error when sending from one internal domain to another. Sending from an external domain everything is fine. If I remove the "internal" connector listed above the split-domain send connector works perfectly fine delivering locally
and to the external server.
How can I make it so both send connectors work?

Hello,
did you solve the problem and how?
Thanks,
Victor
Exchange and Outlook utilities at
http://www.ivasoft.com

IP Phone SSL VPN and Split tunneling

Hi Team,
I went throught the following document which is very useful:
https://supportforums.cisco.com/docs/DOC-9124
The only things i'm not sure about split-tunneling point:
Group-policy must not be configured with split tunnel or split exclude. Only tunnel all is the supported tunneling policy
I could see many implementation when they used split-tunneling, like one of my customer:
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
banner value This system is only for Authorized users.
dns-server value 10.64.10.13 10.64.10.14
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
default-domain value prod.mobily.lan
address-pools value SSLClientPool
webvpn
anyconnect keep-installer installed
anyconnect ssl rekey time 30
anyconnect ssl rekey method ssl
anyconnect ask none default anyconnect
username manager-max password XTEsn4mfYvPwC5af encrypted privilege 15
username manager-max attributes
vpn-group-policy GroupPolicy1
tunnel-group PhoneVPN type remote-access
tunnel-group PhoneVPN general-attributes
address-pool SSLClientPool
authentication-server-group AD
default-group-policy GroupPolicy1
tunnel-group PhoneVPN webvpn-attributes
group-url https://84.23.107.10 enable
ip local pool SSLClientPool 10.200.18.1-10.200.18.254 mask 255.255.254.0
access-list split-tunnel remark split-tunnel network list
access-list split-tunnel standard permit 10.0.0.0 255.0.0.0
It is working for them w/o any issue.
My question would be
- is the limitation about split-tunneling still valid? If yes, why it is not recommended?
Thanks!
Eva

Hi,
If you're not using certificates in client authentication then the SSL handshake will complete before the user is requested to authenticate with username/password. If this authentication request fails you will see the SSL session terminated immediately following this failure (as in the logs you provided). Notice the 5 seconds between the SSL session establishment and termination, this is most likely when the user is being authenticated against the aaa server. If the phone is failing authentication against an external aaa-server you'll want to investigate the logs on that server to determine the root cause of the failure. The ASA can also provide confirmation of the authentication request/reject with the command 'show aaa-server'. If you want to see what's going on at an authentication protocol level you can enable several debugs including "debug aaa authentication|common|internal' and protocol specific debugs such as 'debug radius user|session|all' or 'debug ldap'.
Did this answer your question? If so, please mark it Answered!

LDOMs, Solaris zones and Live Migration

Hi all,
If you are planning to use Solaris zones inside a LDOM and using an external zpool as Solaris zone disk, wouldn't this break one of the requirements for being able to do a Live Migration ? If so, do you have any ideas on how to use Solaris zones inside an LDOM and at the same time be able to do a Live Migration or is it impossible ? I know this may sound as a bad idea but I would very much like to know if it is doable.

Thanks,
By external pool I am thinking of the way you probably are doing it, separate LUNs mirrored in a zpool for the zones coming from two separate IO/Service domains. So even if this zpool exist inside the LDOM as zone storage this will not prevent LM ? That's good news. The requirement "no zpool if Live Migration" must then only be valid for the LDOM storage itself and not for storage attached to the running LDOM. I am also worried about a possible performance penalty introducing an extra layer of virtualisation. Have you done any tests regarding this ?

RA VPN on ASA and Split Tunneling

Hello Forum,
I'm having an issue with RA VPN and split tunneling. Our company doesn't allow split tunneling.
I have the following....
ASA 5520 - ASA Version - 8.0(3)
Group Policies defined for different groups. My test group, I thought I disabled split tunneling but they are still able to surf the net.
For Split Tunneling Policy...
Inherit is unchecked
I have "Tunnel Network List Below"
Testing_splitTunnelAcl is my acl. I have a bunch of host IPs in the list. I don't have any or 0.0.0.0 in the list.
But they can still surf the net.
I would like to block access to net. No hairpinning or internet u-turns.
How do I do this?
Any help greatly appreciated.
Regards,

What does your Testing_spliTunnelAcl have?
To disable split tunneling, your Testing_spliTunnelAcl should only have this...
access-list Testing_splitTunnelAcl standard permit any
...which means all traffic will be encrypted and will be sent to ASA no matter what. If you add any IP Address, only those traffic destined to the IP Address in the list will be encrypted and send to ASA, everything else will go to internet from the client.
It may be confusing but try and see what happens.

Hi, when I upload music into itunes from a cd it sometimes appears in itunes as two different albums and split up the music in 2 or even three albums....how can i merge these albums...this is particularly true when one album may have different composers?

Hi, when I upload music into itunes from a cd it sometimes appears in itunes as two different albums and split up the music in 2 or even three albums....how can i merge these albums...this is particularly true when one album may have different composers?

Generally setting a common Album title and Album Artist will fix things.
For compilations that aren't, select all tracks, Get Info, and on the option tab set Part of a Compilation to No. If it already says No tick the box alongside, then click OK.
For deeper problems see Grouping tracks into albums.
tt2

Use Message Mapping to repeat top node and split Message

I am currently using XSLT Messaging to do majority of the mapping. I have two issues that remain, I need to repeat the top node for each or its child elements and split the message.
<Sensor xmlns="namespace">
<Observation>
    <XML>Some Data</XML>
</Observation
</Sensor>
1. Can it be done in XSLT? I posted a thread asking for help on this. Where I would need to repeat the Sensor tag for each observation. If this is possible then I will able to split the messages at the HTTP adapter used for the target system.
2. Can Message Mapping be used. Using the same xsd on both source and target systems, Will sensor repeat if set to 1:n and observation set to 1:1. In source it is Sensor 1:1, Observation 1:n. If this works then I can use a BPM to shoot out individual messages using a for each.
Any help is greatly appreciated. I am fairly new to XI as this is my first major project. Thanks

Source File                                             Target File
> XI (XSLT) -
> Each observation as one file ---> Out via HTTP
Batch of all orders
Source File
<?xml version="1.0" encoding="ISO-8859-1"?>
<receipt>
<manufacturer>Manufacture Name</manufacturer>
<manufacturer_gln>999999</manufacturer_gln>
<transfer_recipt>0123456</transfer_recipt>
<prod>
    <product_GTIN>99999999999999</product_GTIN >
    <product_LOT>123456A</product_LOT >
    <production_date>20090131</production_date>
    <expire_date>20120131</expire_date>
    <carrier>
      <carrier_type>P</carrier_type>
      <carrier_barcode>001</carrier_barcode>
      <carrier_detail>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>01</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089211</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089212</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089213</carrier_barcode></carrier>
            </carrier_detail>
        </carrier>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>02</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089214</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089215</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089216</carrier_barcode></carrier>
            </carrier_detail>
        </carrier>
      </carrier_detail>
    </carrier>
    <carrier>
      <carrier_type>P</carrier_type>
      <carrier_barcode>002</carrier_barcode>
      <carrier_detail>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>03</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089217</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089218</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089219</carrier_barcode></carrier>
          </carrier_detail>
        </carrier>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>04</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089220</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089221</carrier_barcode></carrier>
           </carrier_detail>
        </carrier>
      </carrier_detail>
    </carrier>
</prod>
</receipt>
Target File
<?xml version="1.0" encoding="UTF-8"?>
<pmlcore:Sensor xmlns:pmlcore="urn:autoid:specification:interchange:PMLCore:xml:schema:1" xmlns:pmluid="urn:autoid:specification:universal:Identifier:xml:schema:1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:autoid:specification:interchange:PMLCore:xml:schema:1 cases.xsd">
<pmluid:ID>GPO_AI_LU_DC</pmluid:ID>
<pmlcore:Observation>
    <pmlcore:DateTime>2008-10-13T17:53:00.265+02:00</pmlcore:DateTime>
    <pmlcore:Command>PACK</pmlcore:Command>
    <pmlcore:Tag>
      <pmluid:ID>01</pmluid:ID>
      <pmlcore:Data>
        <pmlcore:XML>
          <Memory>
            <DataField fieldName="EXPIRATION_DATE">20120131</DataField>
            <DataField fieldName="BATCH_ID">123456A</DataField>
            <DataField fieldName="ZMFG_DATE">20090131</DataField>
            <DataField fieldName="ZMFG_GLN">999999</DataField>
            <DataField fieldName="ZMANUFACTURER">Manufacture Name</DataField>
            <DataField fieldName="ZITEM_COUNT">16</DataField>
            <DataField fieldName="ZWORK_ORDER_NUMBER">0123456</DataField>
          </Memory>
        </pmlcore:XML>
      </pmlcore:Data>
    </pmlcore:Tag>
    <pmlcore:Tag>
      <pmluid:ID>0108699547010089211</pmluid:ID>
      <pmlcore:Data>
        <pmlcore:XML>
          <Memory>
            <DataField fieldName="EXPIRATION_DATE">20120131</DataField>
            <DataField fieldName="BATCH_ID">123456A</DataField>
            <DataField fieldName="ZMFG_DATE">20090131</DataField>
            <DataField fieldName="ZMFG_GLN">999999</DataField>
            <DataField fieldName="ZMANUFACTURER">Manufacture Name</DataField>
            <DataField fieldName="ZWORK_ORDER_NUMBER">0123456</DataField>
          </Memory>
        </pmlcore:XML>
      </pmlcore:Data>
    </pmlcore:Tag>
     </pmlcore:Observation>
     </pmlcore:Sensor>
I have the XSLT Mapping working to transform data from Source file to target File. But my target file has multiple Observations that need to be split into the Sensor, Observation structure.

I get the following message when i try to open ALL my documents : frozen panes and split panes are not supported and were removed. my documents are blank

i get the following message when i try to open any of my documents : frozen panes and split panes are not supported and were removed. All my documents open blanc!

Hi Louisa,
louisa_16_za wrote:
i work with Numbers on my MiniMac and then save the files as Excel because the university only works with Windows.
Numbers is not an Excel clone. Importing and exporting between Numbers and Excel will eventually build up glitches.
If the university only works with 'Windoze' it might be better if you use Excel or a free version of Office (for example, Libre Office or Open Office).
If your marks depend upon a professor who uses Excel, go with the flow.
http://www.howtogeek.com/187663/openoffice-vs.-libreoffice-whats-the-difference- and-which-should-you-use/
Regards,
Ian

Remove Batch Management and Split Valuation Dependencies

Hi,
I need to remove Batch Management Indicator and Split Valuation for a material. Which one should I do first? Are these dependent on one another?
Thanks,
Jograd

You are correct. It did cause lots of error when i tried to do it in test client.
I am trying to remove the valuation category of one right now. It has zero stock and no open documents.
I saw in note Note 155874 - Change valuation category in material master that you need to do this:
2. If you change from split to joint valuation, no valuation data must
exist for a valuation type.
I dont know where to start doing that? Because there is not data for the material. However i noticed that there is valuation for previous period. do i need to delete that too? But there are no stocks for the previous period.
Please help.
Thanks,
Jograd

Batch and split valuation simultaneously

hello all,
we have scenarios in which both batch management and split valuation is active.
we are currently uses STO with stocktransport order by using 351 and 101 movements.
my question is that
why the sap system does not allow plant to plant stock transfer by using 303 and 305 movement type when both batch management and split valuation is active?
is this is a sap standard best practice?
pls explain in detail.
regards
sumit simran

HI,
try following sap note
66953 Stock transport order for split-valuated material
801097 Stock transport order with split valuation
Regards
Kailas Ugale

I have an idea for an iPhone app that I believe would be marketable. However, I have no talent towards writing software. How does I find a reputable programer that would be will to develop and split proceeds?

I have an idea for an iPhone app that I believe would be marketable. However, I have no talent towards writing software. How does I find a reputable programer that would be will to develop and split proceeds?

Find an app you like. Contact the developer of that app and see if they are interested.

Read a excel file and split its sheets to seperate file ?

Dear all :
How to split a excel file into several file, each have one sheet.my code is as below,thanks:
import org.apache.poi.hssf.usermodel.*;
import java.io.*;
import java.util.*;
import org.apache.poi.poifs.filesystem.*;
public class Extractxls {
public static void main(String[] args) throws Exception
try {
POIFSFileSystem fs = new POIFSFileSystem(new FileInputStream(args[0]));
HSSFWorkbook wb = new HSSFWorkbook(fs);
int sheetCount = wb.getNumberOfSheets();
System.out.println(sheetCount);
try {
     while(sheetCount > 0) {
     sheetCount--;
     HSSFWorkbook wb1 = new HSSFWorkbook();
     HSSFSheet s = wb1.createSheet();
     String sheetName = wb.getSheetName(sheetCount);
     HSSFSheet sheet = wb.getSheet(sheetName);
//     HSSFSheet sheet = wb.getSheetAt(sheetCount);
     System.out.println(sheet.toString());
     s = sheet;
FileOutputStream fileOut = new FileOutputStream("atest" + sheetCount + ".xls");
wb.write(fileOut);
fileOut.close();
} catch (Exception e) {
     System.err.println("Error: " + e.getMessage());
} catch (Exception e) { e.toString();}

The HSSFWorkbook class is part of the POI project:
http://jakarta.apache.org/poi/
Regards,
Dave Gilbert
JFreeChart Project Leader
I understand poi porject, my problem is that POI can not read a excel file and split its sheets into seperate file (each have one sheet) ?Does any one know how to do it.

IWeb and using my personal domain name.

I have never published a web site before and this is a first time for me.
With having iWeb version 8 installed I have created a website with photos etc.
I have also registered a domain name to use my personal name. This is the one and only web-site I have published.
The name has been set up for forwarding with the CName as web.mac.com with the host site in the section of ‘Masked forwarding’
And in my personal settings in the account manager on .Mac the correct name has been entered to use for my iWeb site. For example www.anthonyjhowe.com which is my registered name.
In the iWeb application under file I have published all my pages to .mac.
In my iDisk folder on the Internet there is a folder named “web/sites and inside this folder, there is my gallery but also a folder named AnthonyJHowe, this has all my pages I created in iWeb.
There is another folder named “iWeb. But inside this there is one file named sites.rss, and that is all. This is replicated on my iDisk on my desktop.
Now in iWeb when I publish all to .Mac I receive a message that my site can be visited using my domain name and would I like to visit or announce the site. This lists all the pages I have published.
When I click on visit, it takes me to the .Mac welcome screen and not my site.
That’s how far I have got. It’s been over 72 hours since I registered the domain name.
I have searched and read some posts about this but I don’t seem to go any further with this.
Could you give some suggestions please and perhaps point me in the right direction?

This iWeb’s Domain Forwarding feature that has you publish the site to your .Mac account and then uses your domain name as an alias for your Web site should be relative simple procedure, but with quite a lot of posts on this subject, including myself is not easy to set up and it should be as iWeb 08 is a consumer product. There is little information about this at present.
Getting in touch with the registrars can be quite daunting and eventually you may get one person in the office that may be able to help you. Apple's information to suggest you contact the Registrar of you domain host to create a CNAME does not help an ordinary consumer either.
My issue with the Personal Domain feature is that it places the burden of making the switch on the user, and it is far from a straightforward process and my unfortunate lack of experience has led me to ask the question in the first place.
This discussion forum seems to be the only place that gets close to helping you out.
As it stands, the instructions from Apple are extremely vague, mostly advising you to contact your domain name registrar. They give no indication of what to expect or do if things that aren’t working correctly. And that's why a lot ask the question in the first place in this discussion forum. However those who have experience in dealing with these matters may not always see your post.
I can usually work out problems to do with computing, but to be honest this one has me beat and yet it should be and probably is a simple procedure to carry out. But there is either very little information to carry out the procedure or confusing information elsewhere that makes the mind boggle.
The link below is the only information I can find from Apple to help you, unless someone knows of other information.
http://docs.info.apple.com/article.html?artnum=306195

Split Farm - by domain

Please help me here: Has anyone had experience with a SharePoint farm where members of the farm are in different domains? For example FE1 is in Domain A and FE2 is in Domain B. A ONE-WAY trust exists from Domain B to Domain A. I
don't think that is a supported architecture. I can't find it anywhere that says it is (or isn't)

I wouldn't advise such an architecture. The domain accounts used for services would have to be in the trusted domain.
What are the benefits the client hopes to have with such an architecture? This is much more complex then it needs to be.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Reading and Splitting

I have 5 classes:
Fruit
Apple, Melon and gooseberry extends Fruit and has few additional attributes of their own
FruitExpert is the main class
I have to read from a file which is record based according to the first line. For Eg:
APPLE
CRISPIN
YELLOWISH-GREEN
3
10
4
4
11
2
GOOSEBERRY
BLACK VELVET
DARK RED
6
7
2
1
So I will read the file and split it based on records like Apple and the following values will be stored in the apple attributes. Similarly, goosberry.
After reading the file, how do I split it into records?

Smells like homework to me :-)
The easy way would be to read the line by line, into a String.
Presumably the first line tells you what sort of object you need to create (Apple, Melon, GooseBerry)
Two approaches here
1 - with if statements . If Apple, if Melon...
2 - with polymorphism. Instantiate an object of that type, and call a method like fruit.readAttributesFromFile() That method will then read as many lines as it needs to from the file to populate its attributes (presumably the apple would read and process the next 8 lines, and then leave the status ready to read the next line - to tell you what sort of fruit is next in the file.

LDOM 1.1 and split I/O domains

Similar Messages

Maybe you are looking for