LE 8 and Bussing Tracks

I cannot figure out what I am doing wrong. I want to bus the data from Track 1 to an empty track (track 2) so I will have the same recorded data in track 1 and 2 (track 1 will have compression track 2 will not).
I make the output of track 1 BUS 1, and the inout of track 2, BUS 1. I select track 2 to Record, hit record, and I get nothing. The track plays, shows like it is recording, but when I am done there is nothing on track 2.
I have BUS'd other tracks the same way and no problems, but I have two or three tracks that just will nto let me bus it down to another track. What the heck could I be missing as this seems pretty simple.
Is there a limit in LE8 of the number of tracks you can have bus'd?
Any help would be great.
Thanks
RH

Strange - did you check with a new track also? Try setting up a completely new track and see if the error persists.
It may also have to do with the stereo/mono settings, although i never had any trouble with this (maybe because i didn't try), but look if your track 3 has the same stereo/mono settings as track 1 and the respective BUS.
Maybe the track 3 is protected or frozen or something like this?
Fox

Similar Messages

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • Real Instruments and Master Track icons dessapeared

    This is when i open garage band
    This happen when i start to used. The Real Istruments and Master Track icons desappeared. What is this happening and how can I fix it?

    THis can either mean, that the GarageBand application needs reinstalling or that you have corrupted settings and preferences files in your user account. To find out if something in your user account needs fixing, try to launch GarageBand from a different user account.  You could try to log off and sign  into the Guest account or create a second account for testing using the System Preferences "Users&Groups" pane.
    If GarageBand works well using a different account, try HangTime's "oddball probs" fix and trash the GarageBand preferences file - move com.apple.garageband.plist from the Preferences folder in your user library to the Desktop.  See the FAQ:
    http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    But if it even does not work from a different account, trash GarageBand and reinstall it.
    Regards
    Léonie

  • I have just installed iTunes on my laptop and merged tracks under various artists to form one album but when I sync iTunes to my new ipod the tracks on some of the albums are appearing as single artists..... WHY????  I

    I Have just spent the best part of a week installing iTunes on my laptop, transferring over all my music and merging tracks by different artists on one album so that they all show as one album.   I have just plugged in my new ipod classic to sync all my music but the music has gone across in random tracks and split albums.... I really am losing the will to live and am about to throw both iPod and laptop out the window.... So SOMEBODY.... Please HELP.

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Error when trying to access the RBAC User editor and Message tracking

    Hi,
    I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
    I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue. 
    https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
    However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
    the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
    I then checked the event logs on the server and saw the below error logged;
    Current user: 'Domain/Server Services Accounts/administrator'
    Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
    System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
    page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
       at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
       at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       --- End of inner exception stack trace ---
       at System.Web.UI.Page.HandleError(Exception e)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       at System.Web.UI.Page.ProcessRequest()
       at System.Web.UI.Page.ProcessRequest(HttpContext context)
       at ASP.default_aspx.ProcessRequest(HttpContext context)
       at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
    have to close this window and log on again.
       at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
       at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
    Any ideas as to what the above event log is specifically referring to?

    Hi,
    From your description, I would like to clarify the following thing:
    If you want to search message tracking logs, the account you use should be a member of the role groups below:
    Organization Management role group, Records Management role group, Recipient Management role group.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • How do I use Garage Band to practice my guitar against lesson CDs and backing track CDs

    How do I use Garage Band to practice my guitar against lesson CDs and backing track CDs

    GarageBand on your Mac or on an iPad?
    If you are asking abot GB on a Mac you do the following:
    Create a new GarageBand project with a Guitar track
    Insert the CD and drag the audio file of the Lesson track or backing track to an empty region below the tracks in the timeline of the GarageBand window.
    Plug in a set of head phones and put them on to listen to your backing track.
    Plug in your guitar and select the guitar track.
    Click on the measure where you want to start your recording and select the guitar track.
    Press "record" and start to play.
    Regards
    Léonie

  • How do I bounce audio and midi tracks at the same time to burn a CD?

    Hi there,
    I would like to bounce a song with both audio and midi tracks recorded in it onto a CD.
    Despite ensuring that I am doing a realtime bounce (not offline) I am only getting the audio tracks burnt onto the CD - the midi isn't getting bounced to the final output.
    This must be a stupid question, if someone would be so kind as to give me an obvious answer I would be most grateful.
    Thankin y'all
    amata

    Hi A,
    if you use the instrument (with logic virtual synths) tracks for midi,
    it will.
    BTW, why don't you do it offline?
    It will be so much faster.
    Kindly regards,
    Jorge

  • I have an iPod of rock and pop tracks which i generally use on shuffle mode. Now I have a second iPod to store classical music. If I plug it in to my pc will it duplicate my rock and pop or will it register as a different device?

    I have an iPod Classic with rock and pop tracks on which I generally play in shuffle mode. I have now bought a second iPod Classic to store and play classical music as I don't want to shuffle rock with classical. What will happen when I attach the new iPod to my pc? Will it register as a new device with an iTunes file of its own, or will it duplicate what I already have on the original iPod?

    You can attach the second iPod and configure it to sync whatever content you like without affecting the first iPod.  I would take a look at this article for different ways to manage multiple iPods on one computer.
    How to use multiple iPods, iPads, or iPhones with one computer
    B-rock

  • My daughter used her friends apple account to login on her ipad and then the mother of her friend thought it was being hacked and consequently tracked the ipad and my daughter lost all her photos.  Can we get these back?

    My daughter used her friends apple account to login on her ipad and then the mother of her friend thought it was being hacked and consequently tracked the ipad and my daughter lost all her photos.  Can we get these back?

    Your iOS device backup only includes data and settings stored on your device. It doesn’t include data already stored in iCloud, for example contacts, calendars, bookmarks, mail messages, notes, shared photo albums, iCloud Photo Library beta, My Photo Stream, and documents you save in iCloud using iOS apps and Mac apps.

  • Can't click and drag tracks to regular playlists, etc. in iTunes 10.4

    Can't click and drag tracks to regular playlists, etc.--I'm using iTunes 10.4 on Lion.  Thanks.

    Well, I don't see any mention of an updated Lion drivers on Wacom's site, but heres a link to the driver download page and a link to their online community.
    Drivers | Wacom Americas
    Wacom Community
    WTH.

  • TS1389 I've purchased an album through the itunes store and every track plays except one which continually asks me to authorise my computer.  I've tried all the steps suggested above but still no joy.  Anyone have any ideas what i can do next?  Thanks  Pa

    I've purchased an album through the itunes store and every track plays except one which continually asks me to authorise my computer.  I've tried all the steps suggested above but still no joy.  Anyone have any ideas what i can do next?  Thanks  Paul

    Sounds like you have a "damaged track" or "damaged file".
    This worked for me today downloading Kendrick Lamar's new Album "good kid, m.A.A.d city".
    My situation: I bought the album today for my Mac,  MacBook Pro, iPad 2, and iPhone 4S devices.
    Issue: One song (only on my MacBook Pro) would not play, instead display "
    EX: left"
    Solution: 1. Manually delete the song (giving you the error) permantly from the authorized computer.
    2. Open iTunes, Click iTunes Store (left sidebar), and locate Quick Links and then click Purchased to proceed.
    3. Click "Not On This Computer", find the song that wouldn't play, and re-download it again.
    4. Check your Music Library for your song (Should download inside the associated album) and hit play.
    EX: (Song I purchased that wouldn't play because of authorization, playing)
    Enjoy!

  • Can I use the mouse and the track pad at the same time?

    I'm not comfortable with the track pad yet - can I use a mouse and the track pad simultaneously?

    Yes, both can be used simultaneously.
    Regards,
    Captfred

  • How do I get iTunes to read and import track information?

    How do I get iTunes to read and import track information from compilation CDs? Typically, the compilations have been burned to disk using iTunes or Toast 8 Titanium. I have checked data boxes as available with both softwares. My REGA Planet CD player as well as my car CD player can read the track info but neither my nor my friends' iTunes can read the tracks for importing.

    I don't believe that iTunes can read CDText.
    tt2

  • I have recently purchased a CD and some tracks do not play the whole way through. Why?

    I have recently purchased a CD and some tracks do not play the whole way through. Why?

    Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    If you don't see them straight away it may help to close and restart iTunes.
    While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
    If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
    See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
    tt2

  • Face and Eye Tracking with LabView and Vision

    Hey all,
    For my senior project I am trying to perform face tracking and eye tracking by using LabView and the Vision Development Module. Unfortunately I am new to LV and I'm drowning in a sea of links and tutorials so I was wondering if anyone here that has had experience performing similar tasks would be willing to help and point me in the right direction or provide examples. I bought two Logitech c525 webcams and hooked them up to my pc running LabView and Vision 2011. I was able to see images captured but that's as far as I've gotten with the tools. Any tips?
    Thanks,
    Alex.

    have a look at http://sine.ni.com/cs/app/doc/p/id/cs-14116 and http://forums.ni.com/t5/Machine-Vision/how-to-trac​k-face-and-allocate-lips-in-face-using-labview/td-​...
    This thread would also be more suited to the Machine Vision section.

Maybe you are looking for